main
Ray Publish 0.1.1 85cda4e
{
  "schema_version": 1,
  "type": "component",
  "slug": "stm6600cs25dm6f",
  "title": "STM6600CS25DM6F",
  "brief": "STMicroelectronics Supervisor And Reset ICs, TDFN-12(2x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.1",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "power management (pmic)",
    "stm6600cs25dm6f",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "STM6600CS25DM6F",
    "manufacturer": "STMicroelectronics",
    "package": "TDFN-12(2x3)",
    "pin_count": 13,
    "category": "Power Management (PMIC)",
    "subcategory": "Supervisor And Reset ICs",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588912170826944512",
    "parts": {
      "symbol": "stm6600cs25dm6f.kicad_sym",
      "footprint": "stm6600cs25dm6f.kicad_mod",
      "model_3d": "stm6600cs25dm6f-hero.glb",
      "model_3d_plain": "stm6600cs25dm6f.glb",
      "model_3d_step": "stm6600cs25dm6f-etched.step",
      "model_3d_step_plain": "stm6600cs25dm6f.step",
      "lbr": "stm6600cs25dm6f.lbr"
    },
    "distributor_links": {
      "lcsc": "C443976",
      "digikey": "497-10550-2-ND",
      "mouser": "511-STM6600CS25DM6F"
    },
    "distributor_check": {
      "checked_at": "2026-10-03T08:00:49Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "497-10550-2-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "511-STM6600CS25DM6F",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VCC",
        "type": "power_in",
        "description": "Power supply input monitored during startup and normal operation; operating voltage range 1.6 V to 5.5 V; decoupling 0.1 µF capacitor required as close as possible to device."
      },
      {
        "number": "2",
        "name": "SR",
        "type": "input",
        "description": "Smart Reset™ button input with factory-trimmed voltage threshold and ±8 kV HBM ESD protection; active low input connected to GND through momentary push-button; 100 kΩ optional internal pull-up resistor."
      },
      {
        "number": "3",
        "name": "VREF",
        "type": "power_out",
        "description": "Precise 1.5 V voltage reference output with 1% accuracy; available after tREC expires; mandatory 1 µF external capacitor must be connected."
      },
      {
        "number": "4",
        "name": "PSHOLD",
        "type": "input",
        "description": "Power supply hold input with factory-trimmed voltage detector threshold; driven high during startup to confirm proper power-up or low during operation to trigger shutdown; internal pull-down resistor during startup."
      },
      {
        "number": "5",
        "name": "CSRD",
        "type": "input",
        "description": "Smart Reset™ delay time capacitive input; external capacitor to ground determines additional delay tSRD at approximately 10 s/µF; leave open if not used."
      },
      {
        "number": "6",
        "name": "PB",
        "type": "input",
        "description": "Power-on push-button input with factory-trimmed voltage threshold and ±8 kV HBM ESD protection; active low input with internal 100 kΩ pull-up resistor; connected to GND through momentary push-button."
      },
      {
        "number": "7",
        "name": "VCCLO",
        "type": "output",
        "description": "High threshold detection output; active low open drain pulled low when VCC below VTH+ during startup or when undervoltage detected during operation; requires 10 kΩ pull-up resistor; floating in standby mode."
      },
      {
        "number": "8",
        "name": "PBOUT",
        "type": "output",
        "description": "Push-button status output; active low open drain reflecting PB input state after tDEBOUNCE debounce period; stays low minimum tINT_Min if PB held; requires 10 kΩ pull-up resistor."
      },
      {
        "number": "9",
        "name": "EN",
        "type": "output",
        "description": "Enable output (active high for STM6600CS25DM6F); push-pull output asserted after valid power-up event and PSHOLD confirmation; deasserted by button release before PSHOLD confirmation, PSHOLD forced low, undervoltage detected, or long push (>tDEBOUNCE + tSRD)."
      },
      {
        "number": "10",
        "name": "RST",
        "type": "output",
        "description": "Reset output; active low open drain pulled low for tREC minimum 240 ms during power-up after PB falling edge and tDEBOUNCE; requires 10 kΩ pull-up resistor."
      },
      {
        "number": "11",
        "name": "INT",
        "type": "output",
        "description": "Interrupt output; active low open drain asserted when PB pressed for tDEBOUNCE or more during normal operation or when VCC falls below VTH- threshold; held high during power-up; minimum pulse width tINT_Min; requires 10 kΩ pull-up resistor."
      },
      {
        "number": "12",
        "name": "GND",
        "type": "power_in",
        "description": "Ground; device reference potential and application circuit return."
      },
      {
        "number": "13",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "exposed pad 13 added from the footprint"
        ],
        "pages_sent": 23,
        "cost_usd": 0.146,
        "at": "2026-10-03T08:00:24"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588912170826944512",
        "pages": 52,
        "sha256": "24305a688f436ae9",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 13,
        "described": 13,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "stm6600cs25dm6f-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2,
          2.98,
          0.77
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "42b65299f4315ca65559e367c9ea31f10586c59dcbdbd2d944950dadd009e6cc",
        "checked": "2026-11-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "STMicroelectronics",
      "Package": "TDFN-12(2x3)",
      "Category": "Power Management (PMIC)",
      "Pins": "13"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "stm6600cs25dm6f"
  ],
  "discovery_pitch": "STM6600CS25DM6F (STMicroelectronics) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "stm6600cs25dm6f.kicad_sym",
    "stm6600cs25dm6f.kicad_mod",
    "stm6600cs25dm6f.glb",
    "stm6600cs25dm6f.step",
    "stm6600cs25dm6f.lbr",
    "docs/hero.png",
    "docs/stm6600cs25dm6f-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "stm6600cs25dm6f-hero.glb",
    "stm6600cs25dm6f-hero.overlay.json",
    "stm6600cs25dm6f-etched.step"
  ],
  "visibility": "public",
  "description": "STMicroelectronics Supervisor And Reset ICs, TDFN-12(2x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "org": "adom"
}