main
Ray
Initial commit: component/stm6321twy6f
0285f5d
STM6321TWY6F
STMicroelectronics · Supervisor And Reset ICs · SOT-23-5
STM6321TWY6F from STMicroelectronics, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RST | output | Active-low, open-drain reset output for STM6321; pulses low when triggered and stays low whenever VCC is below the reset threshold, remaining low for trec after VCC rises above the reset threshold or a watchdog timeout occurs; requires an external pull-up resistor (e.g. 10 kΩ) to a supply up to 6 V. |
| 2 | VSS | power_in | Ground reference for the device. |
| 3 | RST | output | Active-high, push-pull reset output, the logical inverse of RST, asserted whenever VCC is below the reset threshold or a watchdog timeout occurs and remaining asserted for trec after VCC recovers. |
| 4 | WDI | input | Watchdog input; if WDI is held high or low for at least tWD = 1.6 s (typ.) the watchdog timer expires and RST is asserted, the timer is cleared by a reset or by any rising/falling edge on WDI (edges as short as 50 ns are detected), and the watchdog can be disabled by leaving WDI floating or driving it from a tri-state buffer (max. 10 µA leakage, 200 pF load). |
| 5 | VCC | power_in | Supply voltage input monitored by the precision comparator for the reset threshold; operating range 1.0 to 5.5 V per the DC/AC operating conditions, with typical quiescent supply current of a few µA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
CAD (KiCad official)
- Symbol:
STM6321TWY6F - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
stm6321twy6f-etched.step/stm6321twy6f-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm6321twy6f.step/stm6321twy6f.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (31 pp, sha256
ba50f0fd6706f830, retrieved 2026-09-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# STM6321TWY6F
**STMicroelectronics** · Supervisor And Reset ICs · SOT-23-5
STM6321TWY6F from STMicroelectronics, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RST | output | Active-low, open-drain reset output for STM6321; pulses low when triggered and stays low whenever VCC is below the reset threshold, remaining low for trec after VCC rises above the reset threshold or a watchdog timeout occurs; requires an external pull-up resistor (e.g. 10 kΩ) to a supply up to 6 V. |
| 2 | VSS | power_in | Ground reference for the device. |
| 3 | RST | output | Active-high, push-pull reset output, the logical inverse of RST, asserted whenever VCC is below the reset threshold or a watchdog timeout occurs and remaining asserted for trec after VCC recovers. |
| 4 | WDI | input | Watchdog input; if WDI is held high or low for at least tWD = 1.6 s (typ.) the watchdog timer expires and RST is asserted, the timer is cleared by a reset or by any rising/falling edge on WDI (edges as short as 50 ns are detected), and the watchdog can be disabled by leaving WDI floating or driving it from a tri-state buffer (max. 10 µA leakage, 200 pF load). |
| 5 | VCC | power_in | Supply voltage input monitored by the precision comparator for the reset threshold; operating range 1.0 to 5.5 V per the DC/AC operating conditions, with typical quiescent supply current of a few µA. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
## CAD (KiCad official)
- Symbol: `STM6321TWY6F`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files: `stm6321twy6f-etched.step` / `stm6321twy6f-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm6321twy6f.step` / `stm6321twy6f.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586200214662729728) (31 pp, sha256 `ba50f0fd6706f830`, retrieved 2026-09-23, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/stm6321twy6f-datasheet.pdf)