main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs stm6321twy6f: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers stm6321twy6f: viewers · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Initial commit: component/stm6321twy6f · Ray
stm6321twy6f-etched.fit.json stm6321twy6f: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
stm6321twy6f-etched.glb stm6321twy6f: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC bod… · Ray
stm6321twy6f-etched.step stm6321twy6f: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC bod… · Ray
stm6321twy6f-hero.glb stm6321twy6f: hero from the plain model · Ray
stm6321twy6f-hero.overlay.json stm6321twy6f: hero from the plain model · Ray
stm6321twy6f.glb Publish 0.1.0 · Ray
stm6321twy6f.kicad_mod Publish 0.1.0 · Ray
stm6321twy6f.kicad_sym Publish 0.1.0 · Ray
stm6321twy6f.lbr Publish 0.1.0 · Ray
stm6321twy6f.step Publish 0.1.0 · Ray

STM6321TWY6F

STMicroelectronics · Supervisor And Reset ICs · SOT-23-5

STM6321TWY6F from STMicroelectronics, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RST output Active-low, open-drain reset output for STM6321; pulses low when triggered and stays low whenever VCC is below the reset threshold, remaining low for trec after VCC rises above the reset threshold or a watchdog timeout occurs; requires an external pull-up resistor (e.g. 10 kΩ) to a supply up to 6 V.
2 VSS power_in Ground reference for the device.
3 RST output Active-high, push-pull reset output, the logical inverse of RST, asserted whenever VCC is below the reset threshold or a watchdog timeout occurs and remaining asserted for trec after VCC recovers.
4 WDI input Watchdog input; if WDI is held high or low for at least tWD = 1.6 s (typ.) the watchdog timer expires and RST is asserted, the timer is cleared by a reset or by any rising/falling edge on WDI (edges as short as 50 ns are detected), and the watchdog can be disabled by leaving WDI floating or driving it from a tri-state buffer (max. 10 µA leakage, 200 pF load).
5 VCC power_in Supply voltage input monitored by the precision comparator for the reset threshold; operating range 1.0 to 5.5 V per the DC/AC operating conditions, with typical quiescent supply current of a few µA.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package SOT-23-5
Category Power Management (PMIC)
Pins 5

CAD (KiCad official)

  • Symbol: STM6321TWY6F
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: stm6321twy6f-etched.step / stm6321twy6f-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm6321twy6f.step / stm6321twy6f.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (31 pp, sha256 ba50f0fd6706f830, retrieved 2026-09-23, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF