Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

STM32WB55RGV6

STMicroelectronics · RF Transceiver ICs · QFN-68-EP(8x8)

STM32WB55RGV6 from STMicroelectronics, in a QFN-68-EP(8x8). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VBAT power_in Backup supply for RTC, LSE oscillator, and backup registers; powered from external battery or VDD.
2 PC13 bidirectional GPIO port C bit 13 with RTC tamper, timestamp, output, and wakeup functions; powered through backup domain.
3 PC14-OSC32_IN bidirectional GPIO port C bit 14 or 32.768 kHz low-speed external oscillator input for RTC.
4 PC15-OSC32_OUT bidirectional GPIO port C bit 15 or 32.768 kHz low-speed external oscillator output.
5 PH3-BOOT0 bidirectional GPIO port H bit 3 with BOOT0 function for boot mode selection and configurable as GPIO.
6 PB8 bidirectional GPIO port B bit 8 with 5 V tolerant I/O; supports Timer, I2C1, SPI2, SAI, and LCD alternate functions.
7 PB9 bidirectional GPIO port B bit 9 with 5 V tolerant I/O; supports Timer, I2C1, SPI2, IR output, and LCD functions.
8 NRST bidirectional System reset input pin with internal weak pull-up resistor; asserts reset when driven low.
9 PC0 bidirectional GPIO port C bit 0 with ADC input IN1; supports LPUART, Timer, and low-power timer functions.
10 PC1 bidirectional GPIO port C bit 1 with ADC input IN2; supports SPI2, LPUART, and Timer alternate functions.
11 PC2 bidirectional GPIO port C bit 2 with ADC input IN3; supports SPI2 and low-power timer functions.
12 PC3 bidirectional GPIO port C bit 3 with ADC input IN4; supports SAI, SPI2, LCD VLCD drive, and low-power timer functions.
13 VREF+ power_in Positive reference voltage input for ADC and comparators; may be internally connected to VDDA in UFQFPN48.
14 VDDA power_in Analog supply voltage for ADC, comparators, and voltage reference buffer; 1.62 V to 3.6 V operating range.
15 PA0 bidirectional GPIO port A bit 0 with ADC input IN5 and comparator input; supports Timer2 and SAI functions.
16 PA1 bidirectional GPIO port A bit 1 with ADC input IN6 and comparator input; supports Timer2, I2C1, and SPI1 functions.
17 PA2 bidirectional GPIO port A bit 2 with ADC input IN7; supports LPUART TX, Quadspi NCS, and comparator output.
18 PA3 bidirectional GPIO port A bit 3 with ADC input IN8; supports LPUART RX, Quadspi CLK, and SAI functions.
19 PA4 bidirectional GPIO port A bit 4 with ADC input IN9 and comparator input; supports SPI1 and SAI functions.
20 PA5 bidirectional GPIO port A bit 5 with ADC input IN10 and comparator input; supports Timer2, SPI1, and SAI functions.
21 PA6 bidirectional GPIO port A bit 6 with ADC input IN11; supports Timer1, SPI1, LPUART, and Quadspi functions.
22 PA7 bidirectional GPIO port A bit 7 with ADC input IN12 and comparator output; supports Timer1, SPI1, and Quadspi functions.
23 PA8 bidirectional GPIO port A bit 8 with ADC input IN15; supports Timer1, USART1, LCD COM, and SAI functions.
24 PA9 bidirectional GPIO port A bit 9 with ADC input IN16 and comparator input; supports Timer1, I2C1, USART1, and SPI2.
25 PC4 bidirectional GPIO port C bit 4 with ADC input IN13 and comparator input; supports LCD segment function.
26 PC5 bidirectional GPIO port C bit 5 with ADC input IN14 and comparator input; supports wakeup from low-power modes.
27 PB2 bidirectional GPIO port B bit 2 with comparator input; supports RTC output, Timer, I2C, and SPI functions.
28 PB10 bidirectional GPIO port B bit 10 with comparator output; supports Timer2, I2C3, SPI2, LPUART, and Quadspi functions.
29 PB11 bidirectional GPIO port B bit 11 with comparator output; supports Timer2, I2C3, LPUART, and Quadspi functions.
30 VDD power_in Main supply voltage for core logic and peripherals; 1.71 V to 3.6 V operating range.
31 RF1 bidirectional RF input/output pin for 2.4 GHz antenna connection through low-pass matching network.
32 VSSRF power_in RF section ground; must be connected to ground plane for proper RF operation.
33 VDDRF power_in Dedicated RF supply voltage; 1.71 V to 3.6 V operating range.
34 OSC_OUT output 32 MHz crystal oscillator output for HSE high-speed external clock used by RF and CPU.
35 OSC_IN input 32 MHz crystal oscillator input; requires external 32 MHz crystal for HSE clock source.
36 AT0 output Reserved for production use as antenna tuning output; keep unconnected in user applications.
37 AT1 output Reserved for production use as antenna tuning output; keep unconnected in user applications.
38 PB0 bidirectional GPIO port B bit 0 with 3.6 V tolerant I/O; supports comparator output and external PA control.
39 PB1 bidirectional GPIO port B bit 1 with 3.6 V tolerant I/O; supports LPUART and low-power timer functions.
40 PE4 bidirectional GPIO port E bit 4 with general-purpose digital I/O and event output capability.
41 VFBSMPS power_in SMPS step-down converter feedback voltage input for voltage regulation feedback.
42 VSSSMPS power_in SMPS converter ground return for step-down converter switching current.
43 VLXSMPS power_in SMPS inductor output pin for switched step-down converter filtered output.
44 VDDSMPS power_in SMPS input supply voltage; must be connected to main VDD for step-down converter operation.
45 VDD power_in Main supply voltage for core logic and peripherals; 1.71 V to 3.6 V operating range.
46 PB12 bidirectional GPIO port B bit 12; supports Timer1, I2C3, SPI2, LPUART, and LCD segment functions.
47 PB13 bidirectional GPIO port B bit 13; supports Timer1, I2C3, SPI2, LPUART, and LCD segment functions.
48 PB14 bidirectional GPIO port B bit 14; supports Timer1, I2C3, SPI2, and LCD segment alternate functions.
49 PB15 bidirectional GPIO port B bit 15; supports Timer1, SPI2, RTC reference input, and LCD segment functions.
50 PC6 bidirectional GPIO port C bit 6; supports Touch Sensing, LCD segment, and Timer alternate functions.
51 PA10 bidirectional GPIO port A bit 10 with 5 V tolerant I/O; supports Timer1, I2C1, USART1, USB, and LCD functions.
52 PA11 bidirectional GPIO port A bit 11 with 5 V tolerant I/O and USB DM function; supports Timer1 and USB device.
53 PA12 bidirectional GPIO port A bit 12 with 5 V tolerant I/O and USB DP function; supports USART1 and LPUART.
54 PA13 (JTMS_SWDIO) bidirectional JTAG TMS or SWD data I/O pin with internal pull-up; can be used as GPIO with alternate functions.
55 VDDUSB power_in USB transceiver supply voltage; 3.0 V to 3.6 V when USB device is used.
56 PA14 (JTCK_SWCLK) bidirectional JTAG TCK or SWD clock pin with internal pull-down; can be used as GPIO with LCD and Timer functions.
57 PA15 (JTDI) bidirectional JTAG TDI pin with internal pull-up; can be used as GPIO with Timer2 and alternate functions.
58 PC10 bidirectional GPIO port C bit 10; supports Trace data, Touch Sensing, and LCD COM/segment functions.
59 PC11 bidirectional GPIO port C bit 11; supports Trace data, Touch Sensing, and LCD COM/segment functions.
60 PC12 bidirectional GPIO port C bit 12; supports RTC tamper/wakeup events and LCD COM/segment functions.
61 PD0 bidirectional GPIO port D bit 0; supports SPI2 NSS and Timer alternate functions.
62 PD1 bidirectional GPIO port D bit 1; supports SPI2 SCK and Timer alternate functions.
63 PB3 (JTDO) bidirectional JTAG TDO or Trace SWO pin with internal pull-up; can be used as GPIO with Timer2 and SAI functions.
64 PB4 (NJTRST) bidirectional JTAG NTRST pin with internal pull-up; can be used as GPIO with Timer17 BKIN and comparator input.
65 PB5 bidirectional GPIO port B bit 5; supports Timer1, I2C1, SPI1, USART1, LPUART, and Timer16 BKIN functions.
66 PB6 bidirectional GPIO port B bit 6 with 5 V tolerant I/O; supports Timer1, I2C1, USART1, and Timer16 functions.
67 PB7 bidirectional GPIO port B bit 7 with 5 V tolerant I/O and comparator input; supports Timer1, I2C1, USART1, and Timer17.
68 VDD power_in Main supply voltage for core logic and peripherals; 1.71 V to 3.6 V operating range.
69 EP passive ST DS11929 Rev 4 p.54, Figure 9 STM32WB55Rx VFQFPN68 pinout, note 2: 'The exposed pad must be connected to ground plane.'

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package QFN-68-EP(8x8)
Category RF And Wireless
Pins 69

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
External main supply voltage (VDD, VDDA, VDDUSB, VLCD, VDDRF, VDDSMPS, VBAT) VDDX - VSS -0.3 4 V 74
Input voltage on TT_xx pins VIN 4 V 74
Input voltage on any other pin VIN 4 V 74
Variations between different VDDX power pins of the same domain /ΔVDDx/ 50 mV 75
Variations between all the different ground pins /VSSx-VSS/ 50 mV 75
Total current into sum of all VDD power lines (source) ∑IVDD 130 mA 75
Total current out of sum of all VSS ground lines (sink) ∑IVSS 130 mA 75
Maximum current into each VDD power pin (source) IVDD(PIN) 100 mA 75
Maximum current out of each VSS ground pin (sink) IVSS(PIN) 100 mA 75
Output current sunk by any I/O and control pin except FT_f IIO(PIN) 20 mA 75
Output current sunk by any FT_f pin IIO(PIN) 20 mA 75
Output current sourced by any I/O and control pin IIO(PIN) 20 mA 75
Total output current sunk by sum of all I/Os and control pins ∑IIO(PIN) 100 mA 75
Total output current sourced by sum of all I/Os and control pins ∑IIO(PIN) 100 mA 75
Injected current on FT_xxx, TT_xx, RST and B pins, except PB0 and PB1 IINJ(PIN) -5 0 mA 75
Injected current on PB0 and PB1 IINJ(PIN) -5 0 mA 75
Total injected current (sum of all I/Os and control pins) ∑/IINJ(PIN)/ 25 mA 75
Storage temperature range TSTG -65 150 °C 75
Maximum junction temperature TJ 130 °C 75
Internal AHB clock frequency fHCLK 0 64 MHz 76
Internal APB1 clock frequency fPCLK1 0 64 MHz 76
Internal APB2 clock frequency fPCLK2 0 64 MHz 76
Standard operating voltage VDD 1.71 3.6 V 76
Analog supply voltage VDDA 1.62 3.6 V ADC or COMP used 76
Analog supply voltage VDDA 2.4 3.6 V VREFBUF used 76
Analog supply voltage VDDA 0 V ADC, COMP, VREFBUF not used 76
Backup operating voltage VBAT 1.55 3.6 V 76
SMPS feedback voltage VFBSMPS 1.4 3.6 V 77
Minimum RF voltage VDDRF 1.71 3.6 V 77
USB supply voltage VDDUSB 3 3.6 V USB used 77
USB supply voltage VDDUSB 0 3.6 V USB not used 77
I/O input voltage, TT_xx I/O VIN -0.3 V 77
I/O input voltage, all I/O except TT_xx VIN -0.3 V 77
Power dissipation, VFQFPN68 package PD 425 mW TA = 85 °C for suffix 6 77
Ambient temperature, maximum power dissipation (suffix 6) TA -40 85 °C Maximum power dissipation 77
Ambient temperature, low-power dissipation (suffix 6) TA 105 °C Low-power dissipation 77
Junction temperature range (suffix 6 version) TJ -40 105 °C Suffix 6 version 77
VDD fall time rate tVDD 10 µs/V 85
VDDA rise time rate tVDDA 0 µs/V 85
VDDA fall time rate tVDDA 10 µs/V 85
VDDUSB rise time rate tVDDUSB 0 µs/V 85
VDDUSB fall time rate tVDDUSB 10 µs/V 85
Reset temporization after BOR0 is detected tRSTTEMPO 250 400 µs VDD rising 85
Brown-out reset threshold 0, rising edge VBOR0 1.62 1.66 1.7 V Rising edge 85
Brown-out reset threshold 0, falling edge VBOR0 1.6 1.64 1.69 V Falling edge 85
Internal reference voltage VREFINT 1.182 1.212 1.232 V -40 °C < TA < +125 °C 87
Internal reference voltage spread over the temperature range ΔVREFINT 5 7.5 mV VDD = 3 V 87
Temperature coefficient TCoeff 30 50 ppm/°C -40 °C < TA < +125 °C 87
Long term stability ACoeff 300 1000 ppm 1000 hours, T = 25 °C 87
Voltage coefficient VDDCoeff 250 1200 ppm/V 3.0 V < VDD < 3.6 V 87
1/4 reference voltage VREFINT_DIV1 24 25 26 % 87
1/2 reference voltage VREFINT_DIV2 49 50 51 % 87
3/4 reference voltage VREFINT_DIV3 74 75 76 % 87
Frequency operating range (BLE) Fop 2402 2480 MHz 77
Frequency drift (BLE 1 Mbps) fd -50 50 KHz Bluetooth® Low Energy: ±50 kHz 78
Maximum drift rate (BLE 1 Mbps) maxdr -20 20 KHz/50 µs Bluetooth® Low Energy: ±20 KHz / 50 µs 78
Frequency offset (BLE 1 Mbps) fo -150 150 KHz Bluetooth® Low Energy: ±150 kHz 78
Frequency deviation average (BLE 1 Mbps) ∆f1 225 275 KHz Bluetooth® Low Energy: between 225 and 275 kHz 78
Frequency operating range (802.15.4) Fop 2405 2480 MHz 82
Supply current in Run mode IDD(Run) 8.15 9.3 mA Range 1, fHCLK = 64 MHz, all peripherals disabled, 25 °C 89

CAD (KiCad official)

  • Symbol: STM32WB55RGV6
  • Footprint: Package_DFN_QFN:QFN-68-1EP_8x8mm_P0.4mm_EP5.2x5.2mm
  • 3D model: QFN-68-EP(8x8) (KiCad packages3D, STEP)
  • 3D model files: stm32wb55rgv6-etched.step / stm32wb55rgv6-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm32wb55rgv6.step / stm32wb55rgv6.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (172 pp, sha256 aa7e79c1edc21ddb, retrieved 2026-11-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF