main
Ray Publish 0.1.0 ef205fe
{
  "slug": "stm32wb55cgu6tr",
  "version": "0.1.0",
  "type": "component",
  "description": "STMicroelectronics RF Transceiver ICs, UFQFPN-48(7x7). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "radio frequency chip-antenna",
    "stm32wb55cgu6tr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "stm32wb55cgu6tr.kicad_sym",
    "stm32wb55cgu6tr.kicad_mod",
    "stm32wb55cgu6tr.glb",
    "stm32wb55cgu6tr.step",
    "stm32wb55cgu6tr.lbr",
    "docs/hero.png",
    "docs/stm32wb55cgu6tr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "stm32wb55cgu6tr-hero.glb",
    "stm32wb55cgu6tr-hero.overlay.json"
  ],
  "component": {
    "mpn": "STM32WB55CGU6TR",
    "manufacturer": "STMicroelectronics",
    "package": "UFQFPN-48(7x7)",
    "pin_count": 49,
    "category": "Radio Frequency Chip/Antenna",
    "subcategory": "RF Transceiver ICs",
    "datasheet": "https://www.st.com/resource/en/datasheet/stm32wb55cgu6tr.pdf",
    "parts": {
      "symbol": "stm32wb55cgu6tr.kicad_sym",
      "footprint": "stm32wb55cgu6tr.kicad_mod",
      "model_3d": "stm32wb55cgu6tr-hero.glb",
      "model_3d_plain": "stm32wb55cgu6tr.glb",
      "model_3d_step": "stm32wb55cgu6tr-etched.step",
      "model_3d_step_plain": "stm32wb55cgu6tr.step",
      "lbr": "stm32wb55cgu6tr.lbr"
    },
    "distributor_links": {
      "lcsc": "C3606958",
      "digikey": "497-STM32WB55CGU6TR-ND",
      "mouser": "511-STM32WB55CGU6TR"
    },
    "distributor_check": {
      "checked_at": "2026-11-12T19:47:54Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "497-STM32WB55CGU6TR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "511-STM32WB55CGU6TR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VBAT",
        "type": "power_in",
        "description": "Backup domain supply (RTC, LSE, backup registers) from a battery, supercapacitor or VDD; operating range 1.55 to 3.6 V."
      },
      {
        "number": "2",
        "name": "PC14-OSC32_IN",
        "type": "bidirectional",
        "description": "FT I/O supplied through the power switch (3 mA sink limit, max 2 MHz with 30 pF load in output mode); additional function OSC32_IN for the LSE crystal."
      },
      {
        "number": "3",
        "name": "PC15-OSC32_OUT",
        "type": "bidirectional",
        "description": "FT I/O supplied through the power switch (3 mA sink limit, max 2 MHz with 30 pF load in output mode); additional function OSC32_OUT for the LSE crystal."
      },
      {
        "number": "4",
        "name": "PH3-BOOT0",
        "type": "bidirectional",
        "description": "FT I/O with BOOT0 function; alternate functions CM4_EVENTOUT and LSCO."
      },
      {
        "number": "5",
        "name": "PB8",
        "type": "bidirectional",
        "description": "FT_fl I/O with alternate functions TIM1_CH2N, SAI1_PDM_CK1, I2C1_SCL, QUADSPI_BK1_IO1, LCD_SEG16, SAI1_MCLK_A, TIM16_CH1."
      },
      {
        "number": "6",
        "name": "PB9",
        "type": "bidirectional",
        "description": "FT_fla I/O with alternate functions TIM1_CH3N, SAI1_PDM_DI2, I2C1_SDA, SPI2_NSS, IR_OUT, TSC_G7_IO4, QUADSPI_BK1_IO0, LCD_COM3, SAI1_FS_A, TIM17_CH1."
      },
      {
        "number": "7",
        "name": "NRST",
        "type": "bidirectional",
        "description": "Bidirectional reset pin with weak pull-up resistor."
      },
      {
        "number": "8",
        "name": "VDDA",
        "type": "power_in",
        "description": "Analog supply for ADC, comparators and voltage reference buffer, 1.62 to 3.6 V; connected to VREF+ on UFQFPN48 and tied to VDD when unused."
      },
      {
        "number": "9",
        "name": "PA0",
        "type": "bidirectional",
        "description": "FT_a I/O with TIM2_CH1, COMP1_OUT, SAI1_EXTCLK, TIM2_ETR; additional functions COMP1_INM, ADC1_IN5, RTC_TAMP2/WKUP1."
      },
      {
        "number": "10",
        "name": "PA1",
        "type": "bidirectional",
        "description": "FT_la I/O with TIM2_CH2, I2C1_SMBA, SPI1_SCK, LCD_SEG0; additional functions COMP1_INP, ADC1_IN6."
      },
      {
        "number": "11",
        "name": "PA2",
        "type": "bidirectional",
        "description": "FT_la I/O with LSCO, TIM2_CH3, LPUART1_TX, QUADSPI_BK1_NCS, LCD_SEG1, COMP2_OUT; additional functions COMP2_INM, ADC1_IN7, WKUP4."
      },
      {
        "number": "12",
        "name": "PA3",
        "type": "bidirectional",
        "description": "FT_la I/O with TIM2_CH4, SAI1_PDM_CK1, LPUART1_RX, QUADSPI_CLK, LCD_SEG2, SAI1_MCLK_A; additional functions COMP2_INP, ADC1_IN8."
      },
      {
        "number": "13",
        "name": "PA4",
        "type": "bidirectional",
        "description": "FT_a I/O with SPI1_NSS, SAI1_FS_B, LPTIM2_OUT, LCD_SEG5; additional functions COMP1_INM, COMP2_INM, ADC1_IN9."
      },
      {
        "number": "14",
        "name": "PA5",
        "type": "bidirectional",
        "description": "FT_a I/O with TIM2_CH1, TIM2_ETR, SPI1_SCK, LPTIM2_ETR, SAI1_SD_B; additional functions COMP1_INM, COMP2_INM, ADC1_IN10."
      },
      {
        "number": "15",
        "name": "PA6",
        "type": "bidirectional",
        "description": "FT_la I/O with TIM1_BKIN, SPI1_MISO, LPUART1_CTS, QUADSPI_BK1_IO3, LCD_SEG3, TIM16_CH1; additional function ADC1_IN11."
      },
      {
        "number": "16",
        "name": "PA7",
        "type": "bidirectional",
        "description": "FT_fla I/O with TIM1_CH1N, I2C3_SCL, SPI1_MOSI, QUADSPI_BK1_IO2, LCD_SEG4, COMP2_OUT, TIM17_CH1; additional function ADC1_IN12."
      },
      {
        "number": "17",
        "name": "PA8",
        "type": "bidirectional",
        "description": "FT_la I/O with MCO, TIM1_CH1, SAI1_PDM_CK2, USART1_CK, LCD_COM0, SAI1_SCK_A, LPTIM2_OUT; additional function ADC1_IN15."
      },
      {
        "number": "18",
        "name": "PA9",
        "type": "bidirectional",
        "description": "FT_fla I/O with TIM1_CH2, SAI1_PDM_DI2, I2C1_SCL, SPI2_SCK, USART1_TX, LCD_COM1, SAI1_FS_A; additional functions COMP1_INM, ADC1_IN16."
      },
      {
        "number": "19",
        "name": "PB2",
        "type": "bidirectional",
        "description": "FT_a I/O with RTC_OUT, LPTIM1_OUT, I2C3_SMBA, SPI1_NSS, LCD_VLCD, SAI1_EXTCLK; additional function COMP1_INP."
      },
      {
        "number": "20",
        "name": "VDD",
        "type": "power_in",
        "description": "Digital supply, 1.71 to 3.6 V, for I/Os, internal regulator and system functions."
      },
      {
        "number": "21",
        "name": "RF1",
        "type": "bidirectional",
        "description": "RF input/output, must be connected to the antenna through a low-pass matching network; use the nominal PCB layout."
      },
      {
        "number": "22",
        "name": "VSSRF",
        "type": "power_in",
        "description": "RF ground, to be connected to GND."
      },
      {
        "number": "23",
        "name": "VDDRF",
        "type": "power_in",
        "description": "Dedicated RF supply, must be connected to VDD."
      },
      {
        "number": "24",
        "name": "OSC_OUT",
        "type": "output",
        "description": "32 MHz main oscillator output, also HSE source; use the nominal PCB layout per reference design (AN5165)."
      },
      {
        "number": "25",
        "name": "OSC_IN",
        "type": "input",
        "description": "32 MHz main oscillator input, also HSE source; use the nominal PCB layout per reference design (AN5165)."
      },
      {
        "number": "26",
        "name": "AT0",
        "type": "unconnected",
        "description": "Reserved RF pin, must be kept unconnected."
      },
      {
        "number": "27",
        "name": "AT1",
        "type": "unconnected",
        "description": "Reserved RF pin, must be kept unconnected."
      },
      {
        "number": "28",
        "name": "PB0",
        "type": "bidirectional",
        "description": "TT I/O with COMP1_OUT, RF_TX_MOD_EXT_PA (external PA transmit control); output speed should be set to 00 during RF operation since frequencies above 32 kHz may impact RF performance."
      },
      {
        "number": "29",
        "name": "PB1",
        "type": "bidirectional",
        "description": "TT I/O with LPUART1_RTS_DE, LPTIM2_IN1; output speed should be set to 00 during RF operation since frequencies above 32 kHz may impact RF performance."
      },
      {
        "number": "30",
        "name": "PE4",
        "type": "bidirectional",
        "description": "FT I/O with alternate function CM4_EVENTOUT."
      },
      {
        "number": "31",
        "name": "VFBSMPS",
        "type": "passive",
        "description": "SMPS step-down converter feedback voltage pin (VFBSMPS range 1.4 to 3.6 V)."
      },
      {
        "number": "32",
        "name": "VSSSMPS",
        "type": "power_in",
        "description": "SMPS step-down converter ground."
      },
      {
        "number": "33",
        "name": "VLXSMPS",
        "type": "passive",
        "description": "SMPS step-down converter switching node connecting to the external inductor L1."
      },
      {
        "number": "34",
        "name": "VDDSMPS",
        "type": "power_in",
        "description": "SMPS step-down converter supply, must always be connected to VDD."
      },
      {
        "number": "35",
        "name": "VDD",
        "type": "power_in",
        "description": "Digital supply, 1.71 to 3.6 V, for I/Os, internal regulator and system functions."
      },
      {
        "number": "36",
        "name": "PA10",
        "type": "bidirectional",
        "description": "FT_fl I/O with TIM1_CH3, SAI1_PDM_DI1, I2C1_SDA, USART1_RX, USB_CRS_SYNC, LCD_COM2, SAI1_SD_A, TIM17_BKIN."
      },
      {
        "number": "37",
        "name": "PA11",
        "type": "bidirectional",
        "description": "FT_u I/O with TIM1_CH4, TIM1_BKIN2, SPI1_MISO, USART1_CTS, USB_DM, powered by VDDUSB when USB function is selected."
      },
      {
        "number": "38",
        "name": "PA12",
        "type": "bidirectional",
        "description": "FT_u I/O with TIM1_ETR, SPI1_MOSI, LPUART1_RX, USART1_RTS_DE, USB_DP, powered by VDDUSB when USB function is selected."
      },
      {
        "number": "39",
        "name": "PA13",
        "type": "bidirectional",
        "description": "FT_u I/O, JTMS-SWDIO after reset with internal pull-up active; also IR_OUT, USB_NOE, SAI1_SD_B."
      },
      {
        "number": "40",
        "name": "VDDUSB",
        "type": "power_in",
        "description": "Independent USB transceiver supply, 3.0 to 3.6 V; connect to VDD or ground when USB is not used."
      },
      {
        "number": "41",
        "name": "PA14",
        "type": "bidirectional",
        "description": "FT_l I/O, JTCK-SWCLK after reset with internal pull-down active; also LPTIM1_OUT, I2C1_SMBA, LCD_SEG5, SAI1_FS_B."
      },
      {
        "number": "42",
        "name": "PA15",
        "type": "bidirectional",
        "description": "FT_l I/O, JTDI after reset with internal pull-up active; also TIM2_CH1, TIM2_ETR, SPI1_NSS, TSC_G3_IO1, LCD_SEG17, MCO."
      },
      {
        "number": "43",
        "name": "PB3",
        "type": "bidirectional",
        "description": "FT_la I/O, JTDO-TRACESWO after reset; also TIM2_CH2, SPI1_SCK, USART1_RTS_DE, LCD_SEG7, SAI1_SCK_B; additional function COMP2_INM."
      },
      {
        "number": "44",
        "name": "PB4",
        "type": "bidirectional",
        "description": "FT_fla I/O, NJTRST after reset with internal pull-up active; also I2C3_SDA, SPI1_MISO, USART1_CTS, TSC_G2_IO1, LCD_SEG8, SAI1_MCLK_B, TIM17_BKIN; additional function COMP2_INP."
      },
      {
        "number": "45",
        "name": "PB5",
        "type": "bidirectional",
        "description": "FT_l I/O with LPTIM1_IN1, I2C1_SMBA, SPI1_MOSI, USART1_CK, LPUART1_TX, TSC_G2_IO2, LCD_SEG9, COMP2_OUT, SAI1_SD_B, TIM16_BKIN."
      },
      {
        "number": "46",
        "name": "PB6",
        "type": "bidirectional",
        "description": "FT_fla I/O with LPTIM1_ETR, I2C1_SCL, USART1_TX, TSC_G2_IO3, LCD_SEG6, SAI1_FS_B, TIM16_CH1N, MCO; additional function COMP2_INP."
      },
      {
        "number": "47",
        "name": "PB7",
        "type": "bidirectional",
        "description": "FT_fla I/O with LPTIM1_IN2, TIM1_BKIN, I2C1_SDA, USART1_RX, TSC_G2_IO4, LCD_SEG21, TIM17_CH1N; additional functions COMP2_INM, PVD_IN."
      },
      {
        "number": "48",
        "name": "VDD",
        "type": "power_in",
        "description": "Digital supply, 1.71 to 3.6 V, for I/Os, internal regulator and system functions."
      },
      {
        "number": "49",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The exposed pad of the UFQFPN48 has no pin number in the pin table. The datasheet says it must be co; VFBSMPS and VLXSMPS are marked as supply (S) pins with no direction given, so they are set to passiv; AT0 and AT1 are listed as RF output pins but are marked reserved and must be left unconnected, so th"
        ],
        "pages_sent": 105,
        "cost_usd": 0.4581,
        "at": "2026-11-12T19:47:40"
      },
      "datasheet": {
        "url": "https://www.st.com/resource/en/datasheet/stm32wb55cgu6tr.pdf",
        "pages": 196,
        "sha256": "c25acc0a128f2941",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "model_3d_generated": {
        "generator": "factory/gen_pkg3d.py",
        "family": "QFN",
        "height_mm": 0.55,
        "height_basis": "datasheet A, nominal",
        "standoff_mm": 0.0
      },
      "pins": {
        "total": 49,
        "described": 49,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "stm32wb55cgu6tr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.02,
          7.02,
          0.55
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "f36d6ee86897eea728e2f057af7c4a0ad322f98528d68e90e4ce7a0829ae21b0",
        "checked": "2026-11-12",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "stm32wb55cgu6tr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.02,
          7.02,
          0.55
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "b5ea53ad980a18abd343fefe1acaa572405731d4cc31ead832aa9b762ed55091",
        "checked": "2026-11-12",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "UFQFPN48",
      "source_page": 181,
      "D": {
        "nom_mm": 7.0,
        "range_mm": [
          6.9,
          7.1
        ]
      },
      "E1": {
        "nom_mm": 7.0,
        "range_mm": [
          6.9,
          7.1
        ]
      },
      "e": {
        "nom_mm": 0.5,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 0.55,
        "range_mm": [
          0.5,
          0.6
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "stm32wb55cgu6tr.step",
        "verdict": "PASS",
        "reasons": [
          "height within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}