main
Ray Publish 0.1.0 38544ae
{
  "slug": "stm32u575cit6q",
  "version": "0.1.0",
  "type": "component",
  "description": "STMICROELECTRONICS Global Sourcing Parts, LQFP-48(7x7). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "global sourcing parts",
    "stm32u575cit6q",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "stm32u575cit6q.kicad_sym",
    "stm32u575cit6q.kicad_mod",
    "stm32u575cit6q.glb",
    "stm32u575cit6q.step",
    "stm32u575cit6q.lbr",
    "docs/hero.png",
    "docs/stm32u575cit6q-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "stm32u575cit6q-hero.glb",
    "stm32u575cit6q-hero.overlay.json"
  ],
  "component": {
    "mpn": "STM32U575CIT6Q",
    "manufacturer": "STMICROELECTRONICS",
    "package": "LQFP-48(7x7)",
    "pin_count": 48,
    "category": "Global Sourcing Parts",
    "subcategory": "Global Sourcing Parts",
    "datasheet": "https://www.st.com/resource/en/datasheet/stm32u575ag.pdf",
    "parts": {
      "symbol": "stm32u575cit6q.kicad_sym",
      "footprint": "stm32u575cit6q.kicad_mod",
      "model_3d": "stm32u575cit6q-hero.glb",
      "model_3d_plain": "stm32u575cit6q.glb",
      "model_3d_step": "stm32u575cit6q-etched.step",
      "model_3d_step_plain": "stm32u575cit6q.step",
      "lbr": "stm32u575cit6q.lbr"
    },
    "distributor_links": {
      "lcsc": "C5271011",
      "digikey": "497-STM32U575CIT6Q-ND",
      "mouser": "511-STM32U575CIT6Q"
    },
    "distributor_check": {
      "checked_at": "2026-11-13T15:39:02Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "497-STM32U575CIT6Q-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "511-STM32U575CIT6Q",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VBAT",
        "type": "power_in",
        "description": "Backup-domain supply pin that powers the RTC, the 32 x 32-bit backup registers and the 2-Kbyte backup SRAM in VBAT mode."
      },
      {
        "number": "2",
        "name": "PC13",
        "type": "bidirectional",
        "description": "FT_o I/O supplied through the power switch (VSW) with EVENTOUT, WKUP2, RTC_TS/RTC_OUT1 and TAMP_IN1/TAMP_OUT2 functions; the switch sinks only 3 mA, so output speed must not exceed 2 MHz at 30 pF and the pin must not be used as a current source."
      },
      {
        "number": "3",
        "name": "PC14-OSC32_IN",
        "type": "bidirectional",
        "description": "FT_o I/O supplied through the power switch (VSW) that doubles as the OSC32_IN low-speed oscillator input, with the same 3 mA shared source limit as PC13 to PC15."
      },
      {
        "number": "4",
        "name": "PC15-OSC32_OUT",
        "type": "bidirectional",
        "description": "FT_o I/O supplied through the power switch (VSW) that doubles as the OSC32_OUT low-speed oscillator output, with the same 3 mA shared source limit as PC13 to PC15."
      },
      {
        "number": "5",
        "name": "PH0-OSC_IN (PH0)",
        "type": "bidirectional",
        "description": "FT I/O whose additional function is the OSC_IN high-speed oscillator input."
      },
      {
        "number": "6",
        "name": "PH1-OSC_OUT (PH1)",
        "type": "bidirectional",
        "description": "FT I/O whose additional function is the OSC_OUT high-speed oscillator output."
      },
      {
        "number": "7",
        "name": "NRST",
        "type": "bidirectional",
        "description": "Bidirectional reset pin with an embedded weak pull-up resistor."
      },
      {
        "number": "8",
        "name": "VSSA",
        "type": "power_in",
        "description": "Analog ground for the ADCs, DACs, OPAMPs, COMPs and VREFBUF."
      },
      {
        "number": "9",
        "name": "VDDA",
        "type": "power_in",
        "description": "Analog supply for the ADCs, DACs, OPAMPs, COMPs and VREFBUF, to be decoupled to VSSA."
      },
      {
        "number": "10",
        "name": "PA0",
        "type": "bidirectional",
        "description": "FT_ha I/O with analog switch function supplied by VDDA, also ADC1_IN5, OPAMP1_VINP, WKUP1 and TAMP_IN2/TAMP_OUT1, with alternate functions TIM2_CH1, TIM5_CH1, USART2_CTS and UART4_TX."
      },
      {
        "number": "11",
        "name": "PA1",
        "type": "bidirectional",
        "description": "FT_hat I/O with analog switch function supplied by VDDA, also ADC1_IN6, OPAMP1_VINM, WKUP3 and TAMP_IN5/TAMP_OUT4, with alternate functions TIM2_CH2, TIM5_CH2, SPI1_SCK, USART2_RTS/USART2_DE and UART4_RX."
      },
      {
        "number": "12",
        "name": "PA2",
        "type": "bidirectional",
        "description": "FT_ha I/O with analog switch function supplied by VDDA, also COMP1_INP3, ADC1_IN7 and WKUP4/LSCO, with alternate functions TIM2_CH3, TIM5_CH3, USART2_TX (boot), LPUART1_TX and UCPD1_FRSTX1."
      },
      {
        "number": "13",
        "name": "PA3",
        "type": "bidirectional",
        "description": "TT_hav I/O (3.6 V tolerant) with analog switch function supplied by VDDA, also OPAMP1_VOUT, ADC1_IN8 and WKUP5, with alternate functions TIM2_CH4, TIM5_CH4, SAI1_CK1, USART2_RX (boot) and LPUART1_RX."
      },
      {
        "number": "14",
        "name": "PA4",
        "type": "bidirectional",
        "description": "TT_ha I/O (3.6 V tolerant) with analog switch function supplied by VDDA, also ADC1_IN9, ADC4_IN9, DAC1_OUT1 and WKUP2, with alternate functions SPI1_NSS (boot), SPI3_NSS, USART2_CK and DCMI_HSYNC/PSSI_DE."
      },
      {
        "number": "15",
        "name": "PA5",
        "type": "bidirectional",
        "description": "TT_a I/O (3.6 V tolerant) with analog switch function supplied by VDDA, also ADC1_IN10, ADC4_IN10, DAC1_OUT2 and WKUP6, with alternate functions TIM2_CH1, TIM2_ETR, SPI1_SCK (boot), USART3_RX and LPTIM2_ETR."
      },
      {
        "number": "16",
        "name": "PA6",
        "type": "bidirectional",
        "description": "FT_ha I/O with analog switch function supplied by VDDA, also OPAMP2_VINP, ADC1_IN11, ADC4_IN11 and WKUP7, with alternate functions TIM1_BKIN, TIM3_CH1, TIM8_BKIN, SPI1_MISO (boot), USART3_CTS and LPUART1_CTS."
      },
      {
        "number": "17",
        "name": "PA7",
        "type": "bidirectional",
        "description": "FT_fha I/O with analog switch function supplied by VDDA and Fm+ capability, also OPAMP2_VINM, ADC1_IN12, ADC4_IN20 and WKUP8, with alternate functions TIM1_CH1N, TIM3_CH2, TIM8_CH1N, I2C3_SCL, SPI1_MOSI (boot) and USART3_TX."
      },
      {
        "number": "18",
        "name": "PB0",
        "type": "bidirectional",
        "description": "TT_ha I/O (3.6 V tolerant) with analog switch function supplied by VDDA, also OPAMP2_VOUT, ADC1_IN15 and ADC4_IN18, with alternate functions TIM1_CH2N, TIM3_CH3, TIM8_CH2N, SPI1_NSS, USART3_CK and COMP1_OUT."
      },
      {
        "number": "19",
        "name": "PB1",
        "type": "bidirectional",
        "description": "FT_ha I/O with analog switch function supplied by VDDA, also COMP1_INM1, ADC1_IN16, ADC4_IN19 and WKUP4, with alternate functions TIM1_CH3N, TIM3_CH4, LPTIM3_CH2, MDF1_SDI0, USART3_RTS/USART3_DE and LPUART1_RTS/LPUART1_DE."
      },
      {
        "number": "20",
        "name": "VLXSMPS",
        "type": "power_out",
        "description": "SMPS switching node that must be connected to a 2.2 µH ±20% inductor (ISAT > 0.5 A, DCR < 200 mΩ) between VLXSMPS and VDD11."
      },
      {
        "number": "21",
        "name": "VDDSMPS",
        "type": "power_in",
        "description": "Supply input of the SMPS step-down converter, which requires a 10 µF ±20% input capacitor with ESR < 10 mΩ at 3 MHz and a rated voltage of at least 10 V."
      },
      {
        "number": "22",
        "name": "VSSSMPS",
        "type": "power_in",
        "description": "Ground return pin of the SMPS step-down converter."
      },
      {
        "number": "23",
        "name": "VDD11",
        "type": "power_out",
        "description": "SMPS-regulated core supply node that requires 2 × 2.2 µF ±20% output capacitors with ESR < 20 mΩ at 3 MHz and a rated voltage of at least 10 V."
      },
      {
        "number": "24",
        "name": "VSS",
        "type": "power_in",
        "description": "Ground pin, which must always be connected to the ground of the external supply."
      },
      {
        "number": "25",
        "name": "VDD",
        "type": "power_in",
        "description": "Main power supply pin operating from 1.71 V to 3.6 V."
      },
      {
        "number": "26",
        "name": "PB13",
        "type": "bidirectional",
        "description": "FT_fa I/O with Fm+ capability, with alternate functions TIM1_CH1N, LPTIM3_IN1, I2C2_SCL, SPI2_SCK (boot), MDF1_CKI1, USART3_CTS, LPUART1_CTS and SAI2_SCK_A."
      },
      {
        "number": "27",
        "name": "PB14",
        "type": "bidirectional",
        "description": "FT_fda I/O with Fm+ capability and UCPD dead-battery function, with alternate functions TIM1_CH2N, LPTIM3_ETR, TIM8_CH2N, I2C2_SDA, SPI2_MISO (boot), MDF1_SDI2 and USART3_RTS/USART3_DE; its internal pull-down enables the PA15 (UCPD1_CC1) dead-battery pull-down when high."
      },
      {
        "number": "28",
        "name": "PB15",
        "type": "bidirectional",
        "description": "FT_c I/O (5.5 V maximum input voltage) with USB Type-C function UCPD1_CC2 and WKUP7, with alternate functions RTC_REFIN, TIM1_CH3N, LPTIM2_IN2, TIM8_CH3N, SPI2_MOSI (boot) and SDMMC2_D1."
      },
      {
        "number": "29",
        "name": "PA8",
        "type": "bidirectional",
        "description": "FT_hv I/O (very high-speed capable), with alternate functions MCO, TIM1_CH1, SAI1_CK2, SPI1_RDY, USART1_CK, OTG_FS_SOF and TRACECLK."
      },
      {
        "number": "30",
        "name": "PA9",
        "type": "bidirectional",
        "description": "FT_u I/O whose USB function is supplied by VDDUSB, also OTG_FS_VBUS, with alternate functions TIM1_CH2, SPI2_SCK, DCMI_D0/PSSI_D0, USART1_TX (boot) and SAI1_FS_A."
      },
      {
        "number": "31",
        "name": "PA10",
        "type": "bidirectional",
        "description": "FT_u I/O whose USB function is supplied by VDDUSB, also OTG_FS_ID, with alternate functions CRS_SYNC, TIM1_CH3, LPTIM2_IN2, SAI1_D1, DCMI_D1/PSSI_D1 and USART1_RX (boot)."
      },
      {
        "number": "32",
        "name": "PA11",
        "type": "bidirectional",
        "description": "FT_u I/O whose USB function is supplied by VDDUSB, also OTG_FS_DM (boot), with alternate functions TIM1_CH4, TIM1_BKIN2, SPI1_MISO, USART1_CTS, FDCAN1_RX and EVENTOUT."
      },
      {
        "number": "33",
        "name": "PA12",
        "type": "bidirectional",
        "description": "FT_u I/O whose USB function is supplied by VDDUSB, also OTG_FS_DP (boot), with alternate functions TIM1_ETR, SPI1_MOSI, OCTOSPIM_P2_NCS, USART1_RTS/USART1_DE and FDCAN1_TX."
      },
      {
        "number": "34",
        "name": "PA13",
        "type": "bidirectional",
        "description": "FT I/O that after reset is configured as the JTMS/SWDIO debug function with an internal pull-up enabled, with alternate functions IR_OUT, OTG_FS_NOE and SAI1_SD_B."
      },
      {
        "number": "35",
        "name": "VSS",
        "type": "power_in",
        "description": "Ground pin, which must always be connected to the ground of the external supply."
      },
      {
        "number": "36",
        "name": "VDD",
        "type": "power_in",
        "description": "Main power supply pin operating from 1.71 V to 3.6 V."
      },
      {
        "number": "37",
        "name": "PA14",
        "type": "bidirectional",
        "description": "FT I/O that after reset is configured as the JTCK/SWCLK debug function with an internal pull-down enabled, with alternate functions LPTIM1_CH1, I2C1_SMBA, I2C4_SMBA, OTG_FS_SOF and SAI1_FS_B."
      },
      {
        "number": "38",
        "name": "PA15 (JTDI)",
        "type": "bidirectional",
        "description": "FT_c I/O (5.5 V maximum input voltage) that after reset is configured as JTDI with an internal pull-up, also UCPD1_CC1 dead-battery pull-down, with alternate functions TIM2_CH1, TIM2_ETR, USART2_RX, SPI1_NSS, SPI3_NSS and SAI2_FS_B."
      },
      {
        "number": "39",
        "name": "PB3",
        "type": "bidirectional",
        "description": "FT_fa I/O that after reset is configured as JTDO/TRACESWO, also COMP2_INM2, with alternate functions TIM2_CH2, LPTIM1_CH1, I2C1_SDA, SPI1_SCK, SPI3_SCK and USART1_RTS/USART1_DE."
      },
      {
        "number": "40",
        "name": "PB4 (NJTRST)",
        "type": "bidirectional",
        "description": "FT_fa I/O that after reset is configured as NJTRST with an internal pull-up enabled, also COMP2_INP1, with alternate functions LPTIM1_CH2, TIM3_CH1, SPI1_MISO, SPI3_MISO and USART1_CTS."
      },
      {
        "number": "41",
        "name": "PB5",
        "type": "bidirectional",
        "description": "FT_havd I/O with USB Type-C dead-battery function UCPD1_DBCC1 and WKUP6, with alternate functions LPTIM1_IN1, TIM3_CH2, I2C1_SMBA, SPI1_MOSI, SPI3_MOSI (boot) and USART1_CK."
      },
      {
        "number": "42",
        "name": "PB6",
        "type": "bidirectional",
        "description": "FT_fa I/O with Fm+ capability, also COMP2_INP2 and WKUP3, with alternate functions LPTIM1_ETR, TIM4_CH1, I2C1_SCL (boot), I2C4_SCL and USART1_TX."
      },
      {
        "number": "43",
        "name": "PB7",
        "type": "bidirectional",
        "description": "FT_fhav I/O with Fm+ capability, also COMP2_INM1, PVD_IN and WKUP4, with alternate functions LPTIM1_IN2, TIM4_CH2, I2C1_SDA (boot), I2C4_SDA and USART1_RX."
      },
      {
        "number": "44",
        "name": "PH3-BOOT0",
        "type": "bidirectional",
        "description": "FT I/O that also provides the BOOT0 boot-selection function, and BOOT0 is excluded from the standard I/O input characteristics."
      },
      {
        "number": "45",
        "name": "PB8",
        "type": "bidirectional",
        "description": "FT_f I/O with Fm+ capability and WKUP5, with alternate functions TIM4_CH3, SAI1_CK1, I2C1_SCL, MDF1_CCK0, FDCAN1_RX (boot), SDMMC2_D4 and TIM16_CH1."
      },
      {
        "number": "46",
        "name": "VDD11",
        "type": "power_out",
        "description": "SMPS-regulated core supply node that requires 2 × 2.2 µF ±20% output capacitors with ESR < 20 mΩ at 3 MHz and a rated voltage of at least 10 V."
      },
      {
        "number": "47",
        "name": "VSS",
        "type": "power_in",
        "description": "Ground pin, which must always be connected to the ground of the external supply."
      },
      {
        "number": "48",
        "name": "VDD",
        "type": "power_in",
        "description": "Main power supply pin operating from 1.71 V to 3.6 V."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: MPN STM32U575CIT6Q ends in 'Q', the ordering-code suffix for the dedicated SMPS pinout. The LQFP48 S; The Table 26 and Figure 7 text in the source is garbled, and columns had to be realigned by matching; Pin 46 and pin 23 are both VDD11 on the LQFP48 SMPS package; both are listed as found in Table 26 an"
        ],
        "pages_sent": 132,
        "cost_usd": 0.7911,
        "at": "2026-11-13T15:38:52"
      },
      "datasheet": {
        "url": "https://www.st.com/resource/en/datasheet/stm32u575ag.pdf",
        "pages": 346,
        "sha256": "f3de0b5e62ad45ed",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 48,
        "described": 48,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "stm32u575cit6q.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          9.0,
          9.0,
          1.5
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "9dea352d93177c2904afd7d7b68ea8855ce1ab691f69f8b3e13655600514b6bf",
        "checked": "2026-11-13",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "stm32u575cit6q-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          9.0,
          9.0,
          1.5
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "68fe40cbe1b2eaf99065b00b65bd57e2b4f5373baeb88e6c48658ae3188ac4e3",
        "checked": "2026-11-13",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "LQFP48 (5B)",
      "source_page": 311,
      "D": {
        "nom_mm": 7.0,
        "range_mm": [
          null,
          null
        ]
      },
      "E1": {
        "nom_mm": 7.0,
        "range_mm": [
          null,
          null
        ]
      },
      "E": {
        "nom_mm": 9.0,
        "range_mm": [
          null,
          null
        ]
      },
      "e": {
        "nom_mm": 0.5,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 1.6,
        "range_mm": [
          null,
          1.6
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "stm32u575cit6q.step",
        "verdict": "PASS",
        "reasons": [
          "height and body within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}