main
Ray
Publish 0.1.0
0106705
STM32U385KGU6
STMicroelectronics · IC · UFQFPN-32(5x5)
STM32U385KGU6 from STMicroelectronics, in a UFQFPN-32(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Main supply for the I/Os, internal regulator and system analog, specified 1.71 V to 3.6 V (functionality guaranteed down to VBORx min). |
| 2 | PC14-OSC32_IN | bidirectional | FT_o I/O powered through the VSW power switch and usable as the 32.768 kHz oscillator input OSC32_IN; the switch sinks/sources only 3 mA, so it must not be used as a current source such as an LED driver. |
| 3 | PC15-OSC32_OUT | bidirectional | FT_o I/O powered through the VSW power switch and usable as the 32.768 kHz oscillator output OSC32_OUT; the switch limit is 3 mA, so it must not be used as a current source such as an LED driver. |
| 4 | NRST | bidirectional | Reset pin, bidirectional, with an embedded weak pull-up resistor. |
| 5 | VDDA | power_in | Independent analog supply for ADC, DAC, OPAMPs, comparators and VREFBUF, specified 1.58 V (COMPs) / 1.6 V (DACs, OPAMPs) / 1.62 V (ADCs) / 1.8 V (VREFBUF) to 3.6 V, and must be tied to VDD when these peripherals are unused. |
| 6 | PA0 | bidirectional | FT_a I/O with analog switch function supplied by VDDA; alternate functions include TIM2_CH1, SPI3_RDY, UART4_TX, AUDIOCLK, TIM2_ETR and EVENTOUT, and additional functions include OPAMP1_VINP, ADC1_IN3, WKUP1 and TAMP_IN2. |
| 7 | PA1 | bidirectional | FT_fha I/O (Fm+ capable, high-speed low-voltage mode) with alternate functions LPTIM1_CH2, TIM2_CH2, SPI1_SCK, UART4_RX, OCTOSPI1_DQS and TIM15_CH1N, and additional functions OPAMP1_VINM, ADC1_IN4, WKUP3 and TAMP_IN5. |
| 8 | PA2 | bidirectional | FT_ha I/O with alternate functions TIM2_CH3, SPI1_RDY, LPUART1_TX, OCTOSPI1_NCS and TIM15_CH1, and additional functions COMP1_INP3, ADC1_IN5 and WKUP4/LSCO. |
| 9 | PA3 | bidirectional | TT_ha I/O (3.6 V tolerant, high-speed low-voltage mode) with alternate functions TIM2_CH4, SAI1_CK1, LPUART1_RX, OCTOSPI1_CLK, SAI1_MCLK_A and TIM15_CH2, and additional functions OPAMP1_VOUT, COMP1_INP4, ADC1_IN6 and WKUP5. |
| 10 | PA4 | bidirectional | TT_ha I/O (3.6 V tolerant) with alternate functions OCTOSPI1_NCS, SPI1_NSS (boot), SPI3_NSS, SAI1_FS_B and LPTIM2_CH1, and additional functions ADC1_IN7, ADC2_IN3, DAC1_OUT1 and WKUP2. |
| 11 | PA5 | bidirectional | TT_a I/O (3.6 V tolerant, analog switch supplied by VDDA) with alternate functions PWR_CSLEEP, TIM2_CH1, TIM2_ETR, SPI1_SCK (boot), USART3_RX and LPTIM2_ETR, and additional functions ADC1_IN8, ADC2_IN4, DAC1_OUT2 and WKUP6. |
| 12 | PA6 | bidirectional | FT_fha I/O with alternate functions TIM1_BKIN, TIM3_CH1, I3C2_SDA, I2C2_SDA, SPI1_MISO (boot), I3C1_SDA, USART3_CTS/USART3_NSS, LPUART1_CTS, OCTOSPI1_IO3 and TIM16_CH1, and additional functions OPAMP2_VINP, ADC1_IN9, ADC2_IN5 and WKUP7. |
| 13 | PA7 | bidirectional | FT_fha I/O with alternate functions PWR_CSTOP, TIM1_CH1N, TIM3_CH2, I2C3_SCL, SPI1_MOSI (boot), I3C1_SCL, USART3_TX, OCTOSPI1_IO2, LPTIM2_CH2 and TIM17_CH1, and additional functions OPAMP2_VINM, ADC1_IN10, ADC2_IN6 and WKUP8. |
| 14 | PB0 | bidirectional | TT_ha I/O (3.6 V tolerant) with alternate functions TIM1_CH2N, TIM3_CH3, LPTIM3_CH1, SPI1_NSS, USART3_CK, OCTOSPI1_IO1, COMP1_OUT, AUDIOCLK and EVENTOUT, and additional functions OPAMP2_VOUT, ADC1_IN13 and ADC2_IN9. |
| 15 | PB1 | bidirectional | FT_ha I/O with alternate functions TIM1_CH3N, TIM3_CH4, LPTIM3_CH2, USART3_RTS/USART3_DE, LPUART1_RTS/LPUART1_DE, OCTOSPI1_IO0 and LPTIM2_IN1, and additional functions COMP1_INM1, ADC1_IN14, ADC2_IN10 and WKUP4. |
| 16 | VSS | power_in | Ground pin, to be connected to the board ground. |
| 17 | VDD | power_in | Second main supply pin for the I/Os, internal regulator and system analog, specified 1.71 V to 3.6 V. |
| 18 | PA8 | bidirectional | FT_h I/O with alternate functions MCO, TIM1_CH1, SAI1_CK2, SPI1_RDY, USART1_CK, MCO2, TRACECLK, SAI1_SCK_A and LPTIM2_CH1. |
| 19 | PA9 | bidirectional | FT I/O (5 V tolerant) with alternate functions MCO, TIM1_CH2, SPI2_SCK, USART1_TX (boot), LPUART1_TX, SAI1_FS_A, TIM15_BKIN and EVENTOUT. |
| 20 | PA10 | bidirectional | FT I/O (5 V tolerant) with alternate functions CRS_SYNC, TIM1_CH3, LPTIM2_IN2, SAI1_D1, USART1_RX (boot), LPUART1_RX, MCO2, SAI1_SD_A and TIM17_BKIN. |
| 21 | PA11 | bidirectional | FT_u I/O with USB function supplied by VDDUSB, with alternate functions TIM1_CH4, TIM1_BKIN2, SPI1_MISO, USART1_CTS/USART1_NSS and FDCAN1_RX, and USB_DM as an additional function (boot). |
| 22 | PA12 | bidirectional | FT_u I/O with USB function supplied by VDDUSB, with alternate functions TIM1_ETR, TIM4_ETR, SPI1_MOSI, USART1_RTS/USART1_DE and FDCAN1_TX, and USB_DP as an additional function (boot). |
| 23 | PA13 | bidirectional | FT I/O that after reset is configured as the JTMS/SWDIO debug function with the internal pull-up enabled; alternate functions also include IR_OUT, USB_NOE and SAI1_SD_B. |
| 24 | PA14 | bidirectional | FT I/O that after reset is configured as the JTCK/SWCLK debug function with the internal pull-down enabled; alternate functions also include LPTIM1_CH1, I2C2_SMBA, I2C1_SMBA, I2C3_SMBA, SAI1_FS_B. |
| 25 | PA15 (JTDI) | bidirectional | FT_a I/O that after reset is configured as the JTDI debug function with the internal pull-up enabled; alternate functions include TIM2_CH1, TIM2_ETR, SAI1_D2, SPI1_NSS, SPI3_NSS (boot), USART3_RTS/USART3_DE, UART4_RTS/UART4_DE and TSC_G3_IO1. |
| 26 | PB3 | bidirectional | FT_fha I/O with JTDO/TRACESWO as its default debug function, alternate functions including TIM2_CH2, LPTIM1_CH1, I2C1_SDA, SPI1_SCK, SPI3_SCK (boot) and SAI1_SCK_B, and COMP2_INM2 as an additional function. |
| 27 | PB4 (NJTRST) | bidirectional | FT_fha I/O that after reset is configured as the NJTRST debug function with the internal pull-up enabled; alternate functions include LPTIM1_CH2, TIM3_CH1, I2C3_SDA, SPI1_MISO, SPI3_MISO (boot), USART1_CTS/USART1_NSS and TIM17_BKIN, and COMP2_INP1 as an additional function. |
| 28 | PB5 | bidirectional | FT_ha I/O with alternate functions LPTIM1_IN1, TIM3_CH2, OCTOSPI1_NCLK, I2C1_SMBA, SPI1_MOSI, SPI3_MOSI (boot), USART1_CK, UART5_CTS, COMP2_OUT, SAI1_SD_B and TIM16_BKIN, and WKUP6 as an additional function. |
| 29 | PB6 | bidirectional | FT_fha I/O with alternate functions LPTIM1_ETR, TIM4_CH1, I2C1_SCL (boot), I3C1_SCL, I3C2_SCL, USART1_TX, OCTOSPI1_IO5, SAI1_FS_B and TIM16_CH1N, and additional functions COMP2_INP2 and WKUP3. |
| 30 | PB7-BOOT0 | bidirectional | FT_fha I/O that is internally connected to BOOT0 on the UFQFPN32 package, with alternate functions LPTIM1_IN2, TIM4_CH2, I2C1_SDA (boot), USART1_RX, UART4_CTS, OCTOSPI1_IO6 and TIM17_CH1N, and additional functions COMP2_INM1, PVD_IN and WKUP4. |
| 31 | VCAP | passive | Supply pin listed as type S in the pin definition table; the excerpt gives no further electrical detail for this pin. |
| 32 | VSS | power_in | Ground pin, to be connected to the board ground. |
| 33 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | UFQFPN-32(5x5) |
| Category | |
| Pins | 33 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage VDDX (external main supply incl. VDD, VDDSMPS, VDDA, VDDUSB, VDDIO2, VBAT, VREF+) to VSS | VDDX - VSS | -0.3 | 4 | V | 96 | ||
| I/O supply VDDIOx to VSS | VDDIOx - VSS | -0.3 | 4 | V | HSLV = 0 | 96 | |
| I/O supply VDDIOx to VSS | VDDIOx - VSS | -0.3 | 2.75 | V | HSLV = 1 | 97 | |
| Allowed voltage difference VREF+ over VDDA | VREF+ - VDDA | 0.4 | V | VREF+ > VDDA | 97 | ||
| Variation between different VDDx power pins of the same domain | ∆VDDx | 50 | mV | 97 | |||
| Variation between all ground pins (including VREF-) | VSSx - VSS | 50 | mV | 97 | |||
| Total current into sum of all VDD power lines (source) | ∑IVDD | 150 | mA | 97 | |||
| Total current out of sum of all VSS ground lines (sink) | ∑IVSS | 150 | mA | 97 | |||
| Maximum current into each VDD power pin (source) | IVDD | 100 | mA | 97 | |||
| Maximum current out of each VSS ground pin (sink) | IVSS | 100 | mA | 97 | |||
| Output current sunk by any I/O and control pin | IIO | 20 | mA | 97 | |||
| Output current sourced by any I/O and control pin | IIO | 20 | mA | 97 | |||
| Total output current sunk by sum of all I/Os and control pins | ∑I(PIN) | 120 | mA | 97 | |||
| Total output current sourced by sum of all I/Os and control pins | ∑I(PIN) | 120 | mA | 97 | |||
| Injected current on FT_xx, TT_xx, RST pins | IINJ(PIN) | -5 | 0 | mA | 97 | ||
| Total injected current (sum of all I/Os and control pins) | ∑IINJ(PIN) | -25 | 25 | mA | 97 | ||
| Storage temperature range | TSTG | -65 | 150 | °C | 97 | ||
| Maximum junction temperature | TJ | 110 | °C | 97 | |||
| Standard operating voltage | VDD | 1.71 | 3.6 | V | HSLV = 0 | 98 | |
| Standard operating voltage | VDD | 1.71 | 2.7 | V | HSLV = 1 | 98 | |
| Supply voltage for PG[15:2] I/Os | VDDIO2 | 1.08 | 3.6 | V | At least one I/O in PG[15:2] used, HSLV = 0 | 98 | |
| Supply voltage for PG[15:2] I/Os | VDDIO2 | 2.7 | V | At least one I/O in PG[15:2] used, HSLV = 1 | 98 | ||
| Supply voltage for PG[15:2] I/Os | VDDIO2 | 0 | 3.6 | V | PG[15:2] not used | 98 | |
| USB supply voltage | VDDUSB | 3 | 3.6 | V | USB used | 98 | |
| USB supply voltage | VDDUSB | 0 | V | USB not used | 98 | ||
| Analog supply voltage | VDDA | 1.58 | 3.6 | V | COMP used | 98 | |
| Analog supply voltage | VDDA | 1.6 | 3.6 | V | DAC or OPAMP used | 98 | |
| Analog supply voltage | VDDA | 1.62 | 3.6 | V | ADC used | 98 | |
| Analog supply voltage | VDDA | 1.8 | 3.6 | V | VREFBUF used (normal mode) | 98 | |
| Backup domain supply voltage | VBAT | 1.55 | 3.6 | V | 98 | ||
| I/O input voltage | VIN | -0.3 | V | All I/Os except TT_xx pins; max printed as Min(min(VDD, VDDA, VDDUSB, VDDIO2) + 3.6, 5.5) | 98 | ||
| I/O input voltage on PC13 and FT_o pins | VIN | -0.3 | 3.6 | V | In VBAT mode | 98 | |
| Sum of output current sourced by all I/Os powered by VSW | IIO_SW | 3 | mA | I/Os powered by VSW: PC13, PC14, PC15 | 98 | ||
| Internal regulator VCORE | VCORE | 0.8 | 0.9 | 1 | V | Internal regulator ON, Range 1 | 98 |
| Internal regulator VCORE | VCORE | 0.65 | 0.75 | 0.85 | V | Internal regulator ON, Range 2 | 98 |
| AHB clock frequency | fHCLK | 96 | MHz | Range 1 | 98 | ||
| AHB clock frequency | fHCLK | 48 | MHz | Range 2 | 98 | ||
| APB1, APB2, APB3 clock frequency | fPCLKx (x = 1, 2, 3) | 96 | MHz | Range 1 | 98 | ||
| APB1, APB2, APB3 clock frequency | fPCLKx (x = 1, 2, 3) | 48 | MHz | Range 2 | 98 | ||
| Ambient temperature for suffix 6, maximum power dissipation | TA | -40 | 85 | °C | Maximum power dissipation | 99 | |
| Ambient temperature for suffix 6, low-power dissipation | TA | 105 | °C | Low-power dissipation state; TJ must not exceed TJmax | 99 | ||
| Junction temperature range, suffix 6 version | TJ | -40 | 105 | °C | Suffix 6 version | 99 | |
| VDD rise-time rate | tVDD | 0 | µs/V | 100 | |||
| VDD fall-time rate | tVDD | 20 | µs/V | ULPMEN = 0 | 100 | ||
| VDD fall-time rate, standby mode with BOR level 0 selected | tVDD | 250 | ms/V | Standby mode, BOR level 0 selected with ULPMEN = 1 | 100 | ||
| Reset temporization after BOR0 released | tRSTTEMPO | 900 | µs | VDD rising | 100 | ||
| Brownout reset threshold 0, rising edge | VBOR0 | 1.63 | 1.65 | 1.67 | V | Rising edge | 100 |
| Brownout reset threshold 0, falling edge | VBOR0 | 1.62 | 1.63 | 1.65 | V | Falling edge, Range 1 | 100 |
| Brownout reset threshold 0, falling edge | VBOR0 | 1.61 | 1.63 | 1.65 | V | Falling edge, Range 2 and low-power modes | 100 |
| Internal reference voltage VREFINT | VREFINT | 1.175 | 1.215 | 1.243 | V | Range 1 | 102 |
| Internal reference voltage VREFINT | VREFINT | 1.17 | 1.215 | 1.248 | V | Range 2 and low-power modes | 102 |
| Average temperature coefficient of VREFINT | Tcoeff | 62 | 150 | ppm/°C | -40 °C ≤ TJ ≤ 110 °C | 102 | |
| Internal reference voltage spread over the temperature range | ΔVREFINT | 6 | 15 | mV | VDD = 3 V | 102 | |
| Average voltage coefficient of VREFINT | VDDcoeff1 | 600 | 2300 | ppm/V | 3.0 V ≤ VDD ≤ 3.6 V for -40°C ≤ TJ ≤ +110°C | 102 | |
| Average voltage coefficient of VREFINT | VDDcoeff2 | 270 | 1150 | ppm/V | 1.8 V ≤ VDD ≤ 3.6 V for -40°C ≤ TJ ≤ +110°C | 102 | |
| BOR (unless BOR0) and PVD consumption from VDD | IDD_BOR_PVD | 1 | 1.5 | µA | 101 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
STM32U385KGU6 - Footprint:
Package_DFN_QFN:UFQFPN-32-1EP_5x5mm_P0.5mm_EP3.5x3.5mm - 3D model: UFQFPN-32(5x5), generated on the KiCad land (body 5 x 5 mm, terminals on the pads, 0.55 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
stm32u385kgu6-etched.step/stm32u385kgu6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32u385kgu6.step/stm32u385kgu6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (232 pp, sha256
e939cd842042f13b, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
# STM32U385KGU6
**STMicroelectronics** · IC · UFQFPN-32(5x5)
STM32U385KGU6 from STMicroelectronics, in a UFQFPN-32(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Main supply for the I/Os, internal regulator and system analog, specified 1.71 V to 3.6 V (functionality guaranteed down to VBORx min). |
| 2 | PC14-OSC32_IN | bidirectional | FT_o I/O powered through the VSW power switch and usable as the 32.768 kHz oscillator input OSC32_IN; the switch sinks/sources only 3 mA, so it must not be used as a current source such as an LED driver. |
| 3 | PC15-OSC32_OUT | bidirectional | FT_o I/O powered through the VSW power switch and usable as the 32.768 kHz oscillator output OSC32_OUT; the switch limit is 3 mA, so it must not be used as a current source such as an LED driver. |
| 4 | NRST | bidirectional | Reset pin, bidirectional, with an embedded weak pull-up resistor. |
| 5 | VDDA | power_in | Independent analog supply for ADC, DAC, OPAMPs, comparators and VREFBUF, specified 1.58 V (COMPs) / 1.6 V (DACs, OPAMPs) / 1.62 V (ADCs) / 1.8 V (VREFBUF) to 3.6 V, and must be tied to VDD when these peripherals are unused. |
| 6 | PA0 | bidirectional | FT_a I/O with analog switch function supplied by VDDA; alternate functions include TIM2_CH1, SPI3_RDY, UART4_TX, AUDIOCLK, TIM2_ETR and EVENTOUT, and additional functions include OPAMP1_VINP, ADC1_IN3, WKUP1 and TAMP_IN2. |
| 7 | PA1 | bidirectional | FT_fha I/O (Fm+ capable, high-speed low-voltage mode) with alternate functions LPTIM1_CH2, TIM2_CH2, SPI1_SCK, UART4_RX, OCTOSPI1_DQS and TIM15_CH1N, and additional functions OPAMP1_VINM, ADC1_IN4, WKUP3 and TAMP_IN5. |
| 8 | PA2 | bidirectional | FT_ha I/O with alternate functions TIM2_CH3, SPI1_RDY, LPUART1_TX, OCTOSPI1_NCS and TIM15_CH1, and additional functions COMP1_INP3, ADC1_IN5 and WKUP4/LSCO. |
| 9 | PA3 | bidirectional | TT_ha I/O (3.6 V tolerant, high-speed low-voltage mode) with alternate functions TIM2_CH4, SAI1_CK1, LPUART1_RX, OCTOSPI1_CLK, SAI1_MCLK_A and TIM15_CH2, and additional functions OPAMP1_VOUT, COMP1_INP4, ADC1_IN6 and WKUP5. |
| 10 | PA4 | bidirectional | TT_ha I/O (3.6 V tolerant) with alternate functions OCTOSPI1_NCS, SPI1_NSS (boot), SPI3_NSS, SAI1_FS_B and LPTIM2_CH1, and additional functions ADC1_IN7, ADC2_IN3, DAC1_OUT1 and WKUP2. |
| 11 | PA5 | bidirectional | TT_a I/O (3.6 V tolerant, analog switch supplied by VDDA) with alternate functions PWR_CSLEEP, TIM2_CH1, TIM2_ETR, SPI1_SCK (boot), USART3_RX and LPTIM2_ETR, and additional functions ADC1_IN8, ADC2_IN4, DAC1_OUT2 and WKUP6. |
| 12 | PA6 | bidirectional | FT_fha I/O with alternate functions TIM1_BKIN, TIM3_CH1, I3C2_SDA, I2C2_SDA, SPI1_MISO (boot), I3C1_SDA, USART3_CTS/USART3_NSS, LPUART1_CTS, OCTOSPI1_IO3 and TIM16_CH1, and additional functions OPAMP2_VINP, ADC1_IN9, ADC2_IN5 and WKUP7. |
| 13 | PA7 | bidirectional | FT_fha I/O with alternate functions PWR_CSTOP, TIM1_CH1N, TIM3_CH2, I2C3_SCL, SPI1_MOSI (boot), I3C1_SCL, USART3_TX, OCTOSPI1_IO2, LPTIM2_CH2 and TIM17_CH1, and additional functions OPAMP2_VINM, ADC1_IN10, ADC2_IN6 and WKUP8. |
| 14 | PB0 | bidirectional | TT_ha I/O (3.6 V tolerant) with alternate functions TIM1_CH2N, TIM3_CH3, LPTIM3_CH1, SPI1_NSS, USART3_CK, OCTOSPI1_IO1, COMP1_OUT, AUDIOCLK and EVENTOUT, and additional functions OPAMP2_VOUT, ADC1_IN13 and ADC2_IN9. |
| 15 | PB1 | bidirectional | FT_ha I/O with alternate functions TIM1_CH3N, TIM3_CH4, LPTIM3_CH2, USART3_RTS/USART3_DE, LPUART1_RTS/LPUART1_DE, OCTOSPI1_IO0 and LPTIM2_IN1, and additional functions COMP1_INM1, ADC1_IN14, ADC2_IN10 and WKUP4. |
| 16 | VSS | power_in | Ground pin, to be connected to the board ground. |
| 17 | VDD | power_in | Second main supply pin for the I/Os, internal regulator and system analog, specified 1.71 V to 3.6 V. |
| 18 | PA8 | bidirectional | FT_h I/O with alternate functions MCO, TIM1_CH1, SAI1_CK2, SPI1_RDY, USART1_CK, MCO2, TRACECLK, SAI1_SCK_A and LPTIM2_CH1. |
| 19 | PA9 | bidirectional | FT I/O (5 V tolerant) with alternate functions MCO, TIM1_CH2, SPI2_SCK, USART1_TX (boot), LPUART1_TX, SAI1_FS_A, TIM15_BKIN and EVENTOUT. |
| 20 | PA10 | bidirectional | FT I/O (5 V tolerant) with alternate functions CRS_SYNC, TIM1_CH3, LPTIM2_IN2, SAI1_D1, USART1_RX (boot), LPUART1_RX, MCO2, SAI1_SD_A and TIM17_BKIN. |
| 21 | PA11 | bidirectional | FT_u I/O with USB function supplied by VDDUSB, with alternate functions TIM1_CH4, TIM1_BKIN2, SPI1_MISO, USART1_CTS/USART1_NSS and FDCAN1_RX, and USB_DM as an additional function (boot). |
| 22 | PA12 | bidirectional | FT_u I/O with USB function supplied by VDDUSB, with alternate functions TIM1_ETR, TIM4_ETR, SPI1_MOSI, USART1_RTS/USART1_DE and FDCAN1_TX, and USB_DP as an additional function (boot). |
| 23 | PA13 | bidirectional | FT I/O that after reset is configured as the JTMS/SWDIO debug function with the internal pull-up enabled; alternate functions also include IR_OUT, USB_NOE and SAI1_SD_B. |
| 24 | PA14 | bidirectional | FT I/O that after reset is configured as the JTCK/SWCLK debug function with the internal pull-down enabled; alternate functions also include LPTIM1_CH1, I2C2_SMBA, I2C1_SMBA, I2C3_SMBA, SAI1_FS_B. |
| 25 | PA15 (JTDI) | bidirectional | FT_a I/O that after reset is configured as the JTDI debug function with the internal pull-up enabled; alternate functions include TIM2_CH1, TIM2_ETR, SAI1_D2, SPI1_NSS, SPI3_NSS (boot), USART3_RTS/USART3_DE, UART4_RTS/UART4_DE and TSC_G3_IO1. |
| 26 | PB3 | bidirectional | FT_fha I/O with JTDO/TRACESWO as its default debug function, alternate functions including TIM2_CH2, LPTIM1_CH1, I2C1_SDA, SPI1_SCK, SPI3_SCK (boot) and SAI1_SCK_B, and COMP2_INM2 as an additional function. |
| 27 | PB4 (NJTRST) | bidirectional | FT_fha I/O that after reset is configured as the NJTRST debug function with the internal pull-up enabled; alternate functions include LPTIM1_CH2, TIM3_CH1, I2C3_SDA, SPI1_MISO, SPI3_MISO (boot), USART1_CTS/USART1_NSS and TIM17_BKIN, and COMP2_INP1 as an additional function. |
| 28 | PB5 | bidirectional | FT_ha I/O with alternate functions LPTIM1_IN1, TIM3_CH2, OCTOSPI1_NCLK, I2C1_SMBA, SPI1_MOSI, SPI3_MOSI (boot), USART1_CK, UART5_CTS, COMP2_OUT, SAI1_SD_B and TIM16_BKIN, and WKUP6 as an additional function. |
| 29 | PB6 | bidirectional | FT_fha I/O with alternate functions LPTIM1_ETR, TIM4_CH1, I2C1_SCL (boot), I3C1_SCL, I3C2_SCL, USART1_TX, OCTOSPI1_IO5, SAI1_FS_B and TIM16_CH1N, and additional functions COMP2_INP2 and WKUP3. |
| 30 | PB7-BOOT0 | bidirectional | FT_fha I/O that is internally connected to BOOT0 on the UFQFPN32 package, with alternate functions LPTIM1_IN2, TIM4_CH2, I2C1_SDA (boot), USART1_RX, UART4_CTS, OCTOSPI1_IO6 and TIM17_CH1N, and additional functions COMP2_INM1, PVD_IN and WKUP4. |
| 31 | VCAP | passive | Supply pin listed as type S in the pin definition table; the excerpt gives no further electrical detail for this pin. |
| 32 | VSS | power_in | Ground pin, to be connected to the board ground. |
| 33 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | UFQFPN-32(5x5) |
| Category | |
| Pins | 33 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage VDDX (external main supply incl. VDD, VDDSMPS, VDDA, VDDUSB, VDDIO2, VBAT, VREF+) to VSS | VDDX - VSS | -0.3 | | 4 | V | | 96 |
| I/O supply VDDIOx to VSS | VDDIOx - VSS | -0.3 | | 4 | V | HSLV = 0 | 96 |
| I/O supply VDDIOx to VSS | VDDIOx - VSS | -0.3 | | 2.75 | V | HSLV = 1 | 97 |
| Allowed voltage difference VREF+ over VDDA | VREF+ - VDDA | | | 0.4 | V | VREF+ > VDDA | 97 |
| Variation between different VDDx power pins of the same domain | ∆VDDx | | | 50 | mV | | 97 |
| Variation between all ground pins (including VREF-) | VSSx - VSS | | | 50 | mV | | 97 |
| Total current into sum of all VDD power lines (source) | ∑IVDD | | | 150 | mA | | 97 |
| Total current out of sum of all VSS ground lines (sink) | ∑IVSS | | | 150 | mA | | 97 |
| Maximum current into each VDD power pin (source) | IVDD | | | 100 | mA | | 97 |
| Maximum current out of each VSS ground pin (sink) | IVSS | | | 100 | mA | | 97 |
| Output current sunk by any I/O and control pin | IIO | | | 20 | mA | | 97 |
| Output current sourced by any I/O and control pin | IIO | | | 20 | mA | | 97 |
| Total output current sunk by sum of all I/Os and control pins | ∑I(PIN) | | | 120 | mA | | 97 |
| Total output current sourced by sum of all I/Os and control pins | ∑I(PIN) | | | 120 | mA | | 97 |
| Injected current on FT_xx, TT_xx, RST pins | IINJ(PIN) | -5 | | 0 | mA | | 97 |
| Total injected current (sum of all I/Os and control pins) | ∑IINJ(PIN) | -25 | | 25 | mA | | 97 |
| Storage temperature range | TSTG | -65 | | 150 | °C | | 97 |
| Maximum junction temperature | TJ | | | 110 | °C | | 97 |
| Standard operating voltage | VDD | 1.71 | | 3.6 | V | HSLV = 0 | 98 |
| Standard operating voltage | VDD | 1.71 | | 2.7 | V | HSLV = 1 | 98 |
| Supply voltage for PG[15:2] I/Os | VDDIO2 | 1.08 | | 3.6 | V | At least one I/O in PG[15:2] used, HSLV = 0 | 98 |
| Supply voltage for PG[15:2] I/Os | VDDIO2 | 2.7 | | | V | At least one I/O in PG[15:2] used, HSLV = 1 | 98 |
| Supply voltage for PG[15:2] I/Os | VDDIO2 | 0 | | 3.6 | V | PG[15:2] not used | 98 |
| USB supply voltage | VDDUSB | 3 | | 3.6 | V | USB used | 98 |
| USB supply voltage | VDDUSB | 0 | | | V | USB not used | 98 |
| Analog supply voltage | VDDA | 1.58 | | 3.6 | V | COMP used | 98 |
| Analog supply voltage | VDDA | 1.6 | | 3.6 | V | DAC or OPAMP used | 98 |
| Analog supply voltage | VDDA | 1.62 | | 3.6 | V | ADC used | 98 |
| Analog supply voltage | VDDA | 1.8 | | 3.6 | V | VREFBUF used (normal mode) | 98 |
| Backup domain supply voltage | VBAT | 1.55 | | 3.6 | V | | 98 |
| I/O input voltage | VIN | -0.3 | | | V | All I/Os except TT_xx pins; max printed as Min(min(VDD, VDDA, VDDUSB, VDDIO2) + 3.6, 5.5) | 98 |
| I/O input voltage on PC13 and FT_o pins | VIN | -0.3 | | 3.6 | V | In VBAT mode | 98 |
| Sum of output current sourced by all I/Os powered by VSW | IIO_SW | | | 3 | mA | I/Os powered by VSW: PC13, PC14, PC15 | 98 |
| Internal regulator VCORE | VCORE | 0.8 | 0.9 | 1 | V | Internal regulator ON, Range 1 | 98 |
| Internal regulator VCORE | VCORE | 0.65 | 0.75 | 0.85 | V | Internal regulator ON, Range 2 | 98 |
| AHB clock frequency | fHCLK | | | 96 | MHz | Range 1 | 98 |
| AHB clock frequency | fHCLK | | | 48 | MHz | Range 2 | 98 |
| APB1, APB2, APB3 clock frequency | fPCLKx (x = 1, 2, 3) | | | 96 | MHz | Range 1 | 98 |
| APB1, APB2, APB3 clock frequency | fPCLKx (x = 1, 2, 3) | | | 48 | MHz | Range 2 | 98 |
| Ambient temperature for suffix 6, maximum power dissipation | TA | -40 | | 85 | °C | Maximum power dissipation | 99 |
| Ambient temperature for suffix 6, low-power dissipation | TA | | | 105 | °C | Low-power dissipation state; TJ must not exceed TJmax | 99 |
| Junction temperature range, suffix 6 version | TJ | -40 | | 105 | °C | Suffix 6 version | 99 |
| VDD rise-time rate | tVDD | 0 | | | µs/V | | 100 |
| VDD fall-time rate | tVDD | 20 | | | µs/V | ULPMEN = 0 | 100 |
| VDD fall-time rate, standby mode with BOR level 0 selected | tVDD | 250 | | | ms/V | Standby mode, BOR level 0 selected with ULPMEN = 1 | 100 |
| Reset temporization after BOR0 released | tRSTTEMPO | | | 900 | µs | VDD rising | 100 |
| Brownout reset threshold 0, rising edge | VBOR0 | 1.63 | 1.65 | 1.67 | V | Rising edge | 100 |
| Brownout reset threshold 0, falling edge | VBOR0 | 1.62 | 1.63 | 1.65 | V | Falling edge, Range 1 | 100 |
| Brownout reset threshold 0, falling edge | VBOR0 | 1.61 | 1.63 | 1.65 | V | Falling edge, Range 2 and low-power modes | 100 |
| Internal reference voltage VREFINT | VREFINT | 1.175 | 1.215 | 1.243 | V | Range 1 | 102 |
| Internal reference voltage VREFINT | VREFINT | 1.17 | 1.215 | 1.248 | V | Range 2 and low-power modes | 102 |
| Average temperature coefficient of VREFINT | Tcoeff | | 62 | 150 | ppm/°C | -40 °C ≤ TJ ≤ 110 °C | 102 |
| Internal reference voltage spread over the temperature range | ΔVREFINT | | 6 | 15 | mV | VDD = 3 V | 102 |
| Average voltage coefficient of VREFINT | VDDcoeff1 | | 600 | 2300 | ppm/V | 3.0 V ≤ VDD ≤ 3.6 V for -40°C ≤ TJ ≤ +110°C | 102 |
| Average voltage coefficient of VREFINT | VDDcoeff2 | | 270 | 1150 | ppm/V | 1.8 V ≤ VDD ≤ 3.6 V for -40°C ≤ TJ ≤ +110°C | 102 |
| BOR (unless BOR0) and PVD consumption from VDD | IDD_BOR_PVD | | 1 | 1.5 | µA | | 101 |
## CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol: `STM32U385KGU6`
- Footprint: `Package_DFN_QFN:UFQFPN-32-1EP_5x5mm_P0.5mm_EP3.5x3.5mm`
- 3D model: UFQFPN-32(5x5), generated on the KiCad land (body 5 x 5 mm, terminals on the pads, 0.55 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `stm32u385kgu6-etched.step` / `stm32u385kgu6-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32u385kgu6.step` / `stm32u385kgu6.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [STMicroelectronics datasheet](https://www.st.com/resource/en/datasheet/stm32u385cg.pdf) (232 pp, sha256 `e939cd842042f13b`, retrieved 2026-11-13, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
[Datasheet PDF](docs/stm32u385kgu6-datasheet.pdf)