main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers stm32u385kgu6: viewers rendered from the public page · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
stm32u385kgu6-etched.glb stm32u385kgu6: factory component page (tier=mfr) · Ray
stm32u385kgu6-etched.step stm32u385kgu6: factory component page (tier=mfr) · Ray
stm32u385kgu6-hero.glb stm32u385kgu6: hero GLB from the etched model (keeps the MPN mark) · Ray
stm32u385kgu6-hero.overlay.json stm32u385kgu6: hero GLB from the etched model (keeps the MPN mark) · Ray
stm32u385kgu6.glb Publish 0.1.0 · Ray
stm32u385kgu6.kicad_mod Publish 0.1.0 · Ray
stm32u385kgu6.kicad_sym Publish 0.1.0 · Ray
stm32u385kgu6.lbr Publish 0.1.0 · Ray
stm32u385kgu6.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 33 pins · Ray

STM32U385KGU6

STMicroelectronics · IC · UFQFPN-32(5x5)

STM32U385KGU6 from STMicroelectronics, in a UFQFPN-32(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 VDD power_in Main supply for the I/Os, internal regulator and system analog, specified 1.71 V to 3.6 V (functionality guaranteed down to VBORx min).
2 PC14-OSC32_IN bidirectional FT_o I/O powered through the VSW power switch and usable as the 32.768 kHz oscillator input OSC32_IN; the switch sinks/sources only 3 mA, so it must not be used as a current source such as an LED driver.
3 PC15-OSC32_OUT bidirectional FT_o I/O powered through the VSW power switch and usable as the 32.768 kHz oscillator output OSC32_OUT; the switch limit is 3 mA, so it must not be used as a current source such as an LED driver.
4 NRST bidirectional Reset pin, bidirectional, with an embedded weak pull-up resistor.
5 VDDA power_in Independent analog supply for ADC, DAC, OPAMPs, comparators and VREFBUF, specified 1.58 V (COMPs) / 1.6 V (DACs, OPAMPs) / 1.62 V (ADCs) / 1.8 V (VREFBUF) to 3.6 V, and must be tied to VDD when these peripherals are unused.
6 PA0 bidirectional FT_a I/O with analog switch function supplied by VDDA; alternate functions include TIM2_CH1, SPI3_RDY, UART4_TX, AUDIOCLK, TIM2_ETR and EVENTOUT, and additional functions include OPAMP1_VINP, ADC1_IN3, WKUP1 and TAMP_IN2.
7 PA1 bidirectional FT_fha I/O (Fm+ capable, high-speed low-voltage mode) with alternate functions LPTIM1_CH2, TIM2_CH2, SPI1_SCK, UART4_RX, OCTOSPI1_DQS and TIM15_CH1N, and additional functions OPAMP1_VINM, ADC1_IN4, WKUP3 and TAMP_IN5.
8 PA2 bidirectional FT_ha I/O with alternate functions TIM2_CH3, SPI1_RDY, LPUART1_TX, OCTOSPI1_NCS and TIM15_CH1, and additional functions COMP1_INP3, ADC1_IN5 and WKUP4/LSCO.
9 PA3 bidirectional TT_ha I/O (3.6 V tolerant, high-speed low-voltage mode) with alternate functions TIM2_CH4, SAI1_CK1, LPUART1_RX, OCTOSPI1_CLK, SAI1_MCLK_A and TIM15_CH2, and additional functions OPAMP1_VOUT, COMP1_INP4, ADC1_IN6 and WKUP5.
10 PA4 bidirectional TT_ha I/O (3.6 V tolerant) with alternate functions OCTOSPI1_NCS, SPI1_NSS (boot), SPI3_NSS, SAI1_FS_B and LPTIM2_CH1, and additional functions ADC1_IN7, ADC2_IN3, DAC1_OUT1 and WKUP2.
11 PA5 bidirectional TT_a I/O (3.6 V tolerant, analog switch supplied by VDDA) with alternate functions PWR_CSLEEP, TIM2_CH1, TIM2_ETR, SPI1_SCK (boot), USART3_RX and LPTIM2_ETR, and additional functions ADC1_IN8, ADC2_IN4, DAC1_OUT2 and WKUP6.
12 PA6 bidirectional FT_fha I/O with alternate functions TIM1_BKIN, TIM3_CH1, I3C2_SDA, I2C2_SDA, SPI1_MISO (boot), I3C1_SDA, USART3_CTS/USART3_NSS, LPUART1_CTS, OCTOSPI1_IO3 and TIM16_CH1, and additional functions OPAMP2_VINP, ADC1_IN9, ADC2_IN5 and WKUP7.
13 PA7 bidirectional FT_fha I/O with alternate functions PWR_CSTOP, TIM1_CH1N, TIM3_CH2, I2C3_SCL, SPI1_MOSI (boot), I3C1_SCL, USART3_TX, OCTOSPI1_IO2, LPTIM2_CH2 and TIM17_CH1, and additional functions OPAMP2_VINM, ADC1_IN10, ADC2_IN6 and WKUP8.
14 PB0 bidirectional TT_ha I/O (3.6 V tolerant) with alternate functions TIM1_CH2N, TIM3_CH3, LPTIM3_CH1, SPI1_NSS, USART3_CK, OCTOSPI1_IO1, COMP1_OUT, AUDIOCLK and EVENTOUT, and additional functions OPAMP2_VOUT, ADC1_IN13 and ADC2_IN9.
15 PB1 bidirectional FT_ha I/O with alternate functions TIM1_CH3N, TIM3_CH4, LPTIM3_CH2, USART3_RTS/USART3_DE, LPUART1_RTS/LPUART1_DE, OCTOSPI1_IO0 and LPTIM2_IN1, and additional functions COMP1_INM1, ADC1_IN14, ADC2_IN10 and WKUP4.
16 VSS power_in Ground pin, to be connected to the board ground.
17 VDD power_in Second main supply pin for the I/Os, internal regulator and system analog, specified 1.71 V to 3.6 V.
18 PA8 bidirectional FT_h I/O with alternate functions MCO, TIM1_CH1, SAI1_CK2, SPI1_RDY, USART1_CK, MCO2, TRACECLK, SAI1_SCK_A and LPTIM2_CH1.
19 PA9 bidirectional FT I/O (5 V tolerant) with alternate functions MCO, TIM1_CH2, SPI2_SCK, USART1_TX (boot), LPUART1_TX, SAI1_FS_A, TIM15_BKIN and EVENTOUT.
20 PA10 bidirectional FT I/O (5 V tolerant) with alternate functions CRS_SYNC, TIM1_CH3, LPTIM2_IN2, SAI1_D1, USART1_RX (boot), LPUART1_RX, MCO2, SAI1_SD_A and TIM17_BKIN.
21 PA11 bidirectional FT_u I/O with USB function supplied by VDDUSB, with alternate functions TIM1_CH4, TIM1_BKIN2, SPI1_MISO, USART1_CTS/USART1_NSS and FDCAN1_RX, and USB_DM as an additional function (boot).
22 PA12 bidirectional FT_u I/O with USB function supplied by VDDUSB, with alternate functions TIM1_ETR, TIM4_ETR, SPI1_MOSI, USART1_RTS/USART1_DE and FDCAN1_TX, and USB_DP as an additional function (boot).
23 PA13 bidirectional FT I/O that after reset is configured as the JTMS/SWDIO debug function with the internal pull-up enabled; alternate functions also include IR_OUT, USB_NOE and SAI1_SD_B.
24 PA14 bidirectional FT I/O that after reset is configured as the JTCK/SWCLK debug function with the internal pull-down enabled; alternate functions also include LPTIM1_CH1, I2C2_SMBA, I2C1_SMBA, I2C3_SMBA, SAI1_FS_B.
25 PA15 (JTDI) bidirectional FT_a I/O that after reset is configured as the JTDI debug function with the internal pull-up enabled; alternate functions include TIM2_CH1, TIM2_ETR, SAI1_D2, SPI1_NSS, SPI3_NSS (boot), USART3_RTS/USART3_DE, UART4_RTS/UART4_DE and TSC_G3_IO1.
26 PB3 bidirectional FT_fha I/O with JTDO/TRACESWO as its default debug function, alternate functions including TIM2_CH2, LPTIM1_CH1, I2C1_SDA, SPI1_SCK, SPI3_SCK (boot) and SAI1_SCK_B, and COMP2_INM2 as an additional function.
27 PB4 (NJTRST) bidirectional FT_fha I/O that after reset is configured as the NJTRST debug function with the internal pull-up enabled; alternate functions include LPTIM1_CH2, TIM3_CH1, I2C3_SDA, SPI1_MISO, SPI3_MISO (boot), USART1_CTS/USART1_NSS and TIM17_BKIN, and COMP2_INP1 as an additional function.
28 PB5 bidirectional FT_ha I/O with alternate functions LPTIM1_IN1, TIM3_CH2, OCTOSPI1_NCLK, I2C1_SMBA, SPI1_MOSI, SPI3_MOSI (boot), USART1_CK, UART5_CTS, COMP2_OUT, SAI1_SD_B and TIM16_BKIN, and WKUP6 as an additional function.
29 PB6 bidirectional FT_fha I/O with alternate functions LPTIM1_ETR, TIM4_CH1, I2C1_SCL (boot), I3C1_SCL, I3C2_SCL, USART1_TX, OCTOSPI1_IO5, SAI1_FS_B and TIM16_CH1N, and additional functions COMP2_INP2 and WKUP3.
30 PB7-BOOT0 bidirectional FT_fha I/O that is internally connected to BOOT0 on the UFQFPN32 package, with alternate functions LPTIM1_IN2, TIM4_CH2, I2C1_SDA (boot), USART1_RX, UART4_CTS, OCTOSPI1_IO6 and TIM17_CH1N, and additional functions COMP2_INM1, PVD_IN and WKUP4.
31 VCAP passive Supply pin listed as type S in the pin definition table; the excerpt gives no further electrical detail for this pin.
32 VSS power_in Ground pin, to be connected to the board ground.
33 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package UFQFPN-32(5x5)
Category
Pins 33

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VDDX (external main supply incl. VDD, VDDSMPS, VDDA, VDDUSB, VDDIO2, VBAT, VREF+) to VSS VDDX - VSS -0.3 4 V 96
I/O supply VDDIOx to VSS VDDIOx - VSS -0.3 4 V HSLV = 0 96
I/O supply VDDIOx to VSS VDDIOx - VSS -0.3 2.75 V HSLV = 1 97
Allowed voltage difference VREF+ over VDDA VREF+ - VDDA 0.4 V VREF+ > VDDA 97
Variation between different VDDx power pins of the same domain ∆VDDx 50 mV 97
Variation between all ground pins (including VREF-) VSSx - VSS 50 mV 97
Total current into sum of all VDD power lines (source) ∑IVDD 150 mA 97
Total current out of sum of all VSS ground lines (sink) ∑IVSS 150 mA 97
Maximum current into each VDD power pin (source) IVDD 100 mA 97
Maximum current out of each VSS ground pin (sink) IVSS 100 mA 97
Output current sunk by any I/O and control pin IIO 20 mA 97
Output current sourced by any I/O and control pin IIO 20 mA 97
Total output current sunk by sum of all I/Os and control pins ∑I(PIN) 120 mA 97
Total output current sourced by sum of all I/Os and control pins ∑I(PIN) 120 mA 97
Injected current on FT_xx, TT_xx, RST pins IINJ(PIN) -5 0 mA 97
Total injected current (sum of all I/Os and control pins) ∑IINJ(PIN) -25 25 mA 97
Storage temperature range TSTG -65 150 °C 97
Maximum junction temperature TJ 110 °C 97
Standard operating voltage VDD 1.71 3.6 V HSLV = 0 98
Standard operating voltage VDD 1.71 2.7 V HSLV = 1 98
Supply voltage for PG[15:2] I/Os VDDIO2 1.08 3.6 V At least one I/O in PG[15:2] used, HSLV = 0 98
Supply voltage for PG[15:2] I/Os VDDIO2 2.7 V At least one I/O in PG[15:2] used, HSLV = 1 98
Supply voltage for PG[15:2] I/Os VDDIO2 0 3.6 V PG[15:2] not used 98
USB supply voltage VDDUSB 3 3.6 V USB used 98
USB supply voltage VDDUSB 0 V USB not used 98
Analog supply voltage VDDA 1.58 3.6 V COMP used 98
Analog supply voltage VDDA 1.6 3.6 V DAC or OPAMP used 98
Analog supply voltage VDDA 1.62 3.6 V ADC used 98
Analog supply voltage VDDA 1.8 3.6 V VREFBUF used (normal mode) 98
Backup domain supply voltage VBAT 1.55 3.6 V 98
I/O input voltage VIN -0.3 V All I/Os except TT_xx pins; max printed as Min(min(VDD, VDDA, VDDUSB, VDDIO2) + 3.6, 5.5) 98
I/O input voltage on PC13 and FT_o pins VIN -0.3 3.6 V In VBAT mode 98
Sum of output current sourced by all I/Os powered by VSW IIO_SW 3 mA I/Os powered by VSW: PC13, PC14, PC15 98
Internal regulator VCORE VCORE 0.8 0.9 1 V Internal regulator ON, Range 1 98
Internal regulator VCORE VCORE 0.65 0.75 0.85 V Internal regulator ON, Range 2 98
AHB clock frequency fHCLK 96 MHz Range 1 98
AHB clock frequency fHCLK 48 MHz Range 2 98
APB1, APB2, APB3 clock frequency fPCLKx (x = 1, 2, 3) 96 MHz Range 1 98
APB1, APB2, APB3 clock frequency fPCLKx (x = 1, 2, 3) 48 MHz Range 2 98
Ambient temperature for suffix 6, maximum power dissipation TA -40 85 °C Maximum power dissipation 99
Ambient temperature for suffix 6, low-power dissipation TA 105 °C Low-power dissipation state; TJ must not exceed TJmax 99
Junction temperature range, suffix 6 version TJ -40 105 °C Suffix 6 version 99
VDD rise-time rate tVDD 0 µs/V 100
VDD fall-time rate tVDD 20 µs/V ULPMEN = 0 100
VDD fall-time rate, standby mode with BOR level 0 selected tVDD 250 ms/V Standby mode, BOR level 0 selected with ULPMEN = 1 100
Reset temporization after BOR0 released tRSTTEMPO 900 µs VDD rising 100
Brownout reset threshold 0, rising edge VBOR0 1.63 1.65 1.67 V Rising edge 100
Brownout reset threshold 0, falling edge VBOR0 1.62 1.63 1.65 V Falling edge, Range 1 100
Brownout reset threshold 0, falling edge VBOR0 1.61 1.63 1.65 V Falling edge, Range 2 and low-power modes 100
Internal reference voltage VREFINT VREFINT 1.175 1.215 1.243 V Range 1 102
Internal reference voltage VREFINT VREFINT 1.17 1.215 1.248 V Range 2 and low-power modes 102
Average temperature coefficient of VREFINT Tcoeff 62 150 ppm/°C -40 °C ≤ TJ ≤ 110 °C 102
Internal reference voltage spread over the temperature range ΔVREFINT 6 15 mV VDD = 3 V 102
Average voltage coefficient of VREFINT VDDcoeff1 600 2300 ppm/V 3.0 V ≤ VDD ≤ 3.6 V for -40°C ≤ TJ ≤ +110°C 102
Average voltage coefficient of VREFINT VDDcoeff2 270 1150 ppm/V 1.8 V ≤ VDD ≤ 3.6 V for -40°C ≤ TJ ≤ +110°C 102
BOR (unless BOR0) and PVD consumption from VDD IDD_BOR_PVD 1 1.5 µA 101

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: STM32U385KGU6
  • Footprint: Package_DFN_QFN:UFQFPN-32-1EP_5x5mm_P0.5mm_EP3.5x3.5mm
  • 3D model: UFQFPN-32(5x5), generated on the KiCad land (body 5 x 5 mm, terminals on the pads, 0.55 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: stm32u385kgu6-etched.step / stm32u385kgu6-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm32u385kgu6.step / stm32u385kgu6.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (232 pp, sha256 e939cd842042f13b, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF