component
STM32U031C6T6
Public Made by Adomby adom
ST(意法半导体) , LQFP-48(7x7). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.
main
Ray
Publish 0.1.0
c1e9777
STM32U031C6T6
ST(意法半导体) · IC · LQFP-48(7x7)
STM32U031C6T6 from ST(意法半导体), in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VBAT | power_in | Backup domain supply input, 1.55 V to 3.6 V, that keeps the RTC, LSE and backup registers powered when VDD is unavailable. |
| 2 | PC13 | bidirectional | 5 V-tolerant (FT) GPIO supplied through the power switch, which limits it to 3 mA sourcing; output speed must not exceed 2 MHz at 30 pF and it must not be used as a current source (for example to drive an LED); also WKUP2, TAMP_IN1 and RTC_TS/RTC_OUT1. |
| 3 | PC14-OSC32_IN | bidirectional | 5 V-tolerant (FT) GPIO on the power-switch domain with the same 3 mA and 2 MHz / 30 pF output limits, which also serves as the 32.768 kHz LSE oscillator input OSC32_IN. |
| 4 | PC15-OSC32_OUT | bidirectional | 5 V-tolerant (FT) GPIO on the power-switch domain with the same 3 mA and 2 MHz / 30 pF output limits, which also serves as the 32.768 kHz LSE oscillator output OSC32_OUT. |
| 5 | PF0-OSC_IN | bidirectional | 5 V-tolerant (FT) GPIO that serves as the HSE crystal oscillator input OSC_IN (4 to 48 MHz crystal oscillator). |
| 6 | PF1-OSC_OUT | bidirectional | 5 V-tolerant (FT) GPIO that serves as the HSE crystal oscillator output OSC_OUT (4 to 48 MHz crystal oscillator). |
| 7 | PF2-NRST | bidirectional | Bidirectional reset pin with embedded weak pull-up resistor (RST type), also available as MCO output. |
| 8 | VSSA/VREF- | power_in | Analog ground and negative ADC/DAC reference pin; all ground pins must stay within 50 mV of each other, including VREF-. |
| 9 | VDDA/VREF+ | power_in | Analog supply, 1.62 V to 3.6 V when ADC or COMP is used (1.8 V minimum with OPAMP), and positive ADC reference VREF+, which is internally connected to VDDA. |
| 10 | PA0 | bidirectional | 5 V-tolerant analog-switch GPIO (FT_a); alternate functions include TIM2_CH1, USART2_CTS, COMP1_OUT, WKUP1 and ADC1_IN5. |
| 11 | PA1 | bidirectional | 5 V-tolerant analog-switch GPIO (FT_a); alternate functions include TIM2_CH2, SPI1_SCK, USART2_RTS/USART2_DE, WKUP3 and ADC1_IN6. |
| 12 | PA2 | bidirectional | 5 V-tolerant analog-switch GPIO (FT_a); alternate functions include USART2_TX, LPUART1_TX, TIM15_CH1, WKUP4/LSCO and ADC1_IN7. |
| 13 | PA3 | bidirectional | 3.6 V-tolerant analog-switch GPIO (TT_a); alternate functions include USART2_RX, LPUART1_RX, TIM15_CH2, OPAMP1_VOUT and ADC1_IN8. |
| 14 | PA4 | bidirectional | 3.6 V-tolerant analog-switch GPIO (TT_a); alternate functions include SPI1_NSS, USART2_CK, LPTIM2_CH1, DAC1_OUT1 and ADC1_IN9. |
| 15 | PA5 | bidirectional | 5 V-tolerant analog-switch GPIO (FT_a); alternate functions include TIM2_CH1, TIM2_ETR, SPI1_SCK, USART3_TX, LPTIM2_ETR and ADC1_IN10. |
| 16 | PA6 | bidirectional | 5 V-tolerant analog-switch GPIO (FT_a); alternate functions include TIM1_BKIN, TIM3_CH1, SPI1_MISO, COMP1_OUT, TIM16_CH1 and ADC1_IN11. |
| 17 | PA7 | bidirectional | 5 V-tolerant GPIO with analog switch supplied by VDDA and Fm+ capability (FT_fa); alternate functions include TIM1_CH1N, TIM3_CH2, SPI1_MOSI, I2C2_SCL/I2C3_SCL and ADC1_IN15. |
| 18 | PB0 | bidirectional | 5 V-tolerant analog-switch GPIO (FT_a); alternate functions include TIM1_CH2N, TIM3_CH3, SPI1_NSS, USART3_CK, COMP1_OUT and ADC1_IN18. |
| 19 | PB1 | bidirectional | 5 V-tolerant analog-switch GPIO (FT_a); alternate functions include TIM1_CH3N, TIM3_CH4, USART3_RTS/USART3_DE, LPUART1_RTS/LPUART1_DE, COMP1_INM2 and ADC1_IN19. |
| 20 | PB2 | bidirectional | 5 V-tolerant analog-switch GPIO (FT_a); alternate functions include RTC_OUT2, LPTIM1_CH1, COMP1_INP2 and RTC_OUT2. |
| 21 | PB10 | bidirectional | 5 V-tolerant Fm+ capable GPIO (FT_f); alternate functions include TIM2_CH3, I2C2_SCL, SPI2_SCK, USART3_TX, LPUART1_RX and COMP1_OUT. |
| 22 | PB11 | bidirectional | 5 V-tolerant Fm+ capable GPIO (FT_f); alternate functions include TIM2_CH4, I2C2_SDA, USART3_RX, LPUART1_TX and LPUART2_TX. |
| 23 | VSS | power_in | Ground pin that must be connected to the external power supply ground within the permitted range. |
| 24 | VDD | power_in | Main supply pin, 1.71 V to 3.6 V (standard operating voltage), which must be decoupled close to the pin. |
| 25 | PB12 | bidirectional | 5 V-tolerant GPIO (FT); alternate functions include TIM1_BKIN, SPI2_NSS, USART3_CK, LPUART1_RTS/LPUART1_DE and TIM15_BKIN. |
| 26 | PB13 | bidirectional | 5 V-tolerant Fm+ capable GPIO (FT_f); alternate functions include TIM1_CH1N, I2C2_SCL, SPI2_SCK, USART3_CTS and TIM15_CH1N. |
| 27 | PB14 | bidirectional | 5 V-tolerant Fm+ capable GPIO (FT_f); alternate functions include TIM1_CH2N, I2C2_SDA, SPI2_MISO, USART3_RTS/USART3_DE and TIM15_CH1. |
| 28 | PB15 | bidirectional | 5 V-tolerant GPIO (FT); alternate functions include RTC_REFIN, TIM1_CH3N, SPI2_MOSI, TIM15_CH2, WKUP7 and TAMP_IN3. |
| 29 | PA8 | bidirectional | 5 V-tolerant GPIO (FT); alternate functions include MCO, TIM1_CH1, MCO2, USART1_CK and LPTIM2_CH1. |
| 30 | PA9 | bidirectional | 5 V-tolerant GPIO with analog switch and Fm+ capability (FT_fa); alternate functions include MCO, TIM1_CH2, I2C1_SCL, USART1_TX and COMP1_INP4, and it can be remapped in place of PA11 via SYSCFG_CFGR1. |
| 31 | PA10 | bidirectional | 5 V-tolerant Fm+ capable GPIO (FT_f); alternate functions include TIM1_CH3, MCO2, I2C1_SDA, SPI2_NSS and USART1_RX, and it can be remapped in place of PA12 via SYSCFG_CFGR1. |
| 32 | PA11 [PA9] | bidirectional | 5 V-tolerant GPIO (FT, note 3); default function is PA11 with alternate functions TIM1_CH4, TIM1_BKIN2, SPI1_MISO, USART1_CTS and COMP1_OUT, and it can be remapped to PA9 via SYSCFG_CFGR1. |
| 33 | PA12 [PA10] | bidirectional | 5 V-tolerant GPIO (FT, note 3); default function is PA12 with alternate functions TIM1_ETR, SPI1_MOSI, SPI2_MOSI and USART1_RTS/USART1_DE, and it can be remapped to PA10 via SYSCFG_CFGR1. |
| 34 | PA13 (SWDIO) | bidirectional | 5 V-tolerant GPIO (FT, note 4) that is the SWDIO debug pin, with the internal pull-up activated after reset; also IR_OUT and TSC_G7_IO4. |
| 35 | VSS | power_in | Ground pin that must be connected to the external power supply ground within the permitted range. |
| 36 | VDD | power_in | Main supply pin, 1.71 V to 3.6 V (standard operating voltage), which must be decoupled close to the pin. |
| 37 | PA14 (SWCLK) | bidirectional | 5 V-tolerant GPIO (FT, note 4) that is the SWCLK debug pin, with the internal pull-down activated after reset; also LPTIM1_CH1 and TSC_G3_IO4. |
| 38 | PA15 | bidirectional | 5 V-tolerant GPIO (FT); alternate functions include TIM2_CH1, TIM2_ETR, USART2_RX, SPI1_NSS, USART3_RTS/USART3_DE and USART4_RTS/USART4_DE. |
| 39 | PB3 | bidirectional | 5 V-tolerant GPIO with analog switch and Fm+ capability (FT_fa); alternate functions include TIM2_CH2, LPTIM1_CH3, I2C2_SCL, I2C3_SCL, SPI1_SCK and USART1_RTS/USART1_DE. |
| 40 | PB4 | bidirectional | 5 V-tolerant Fm+ capable GPIO (FT_f); alternate functions include LPTIM1_CH4, TIM3_CH1, I2C2_SDA, I2C3_SDA, SPI1_MISO and USART1_CTS. |
| 41 | PB5 | bidirectional | 5 V-tolerant GPIO (FT); alternate functions include LPTIM1_IN1, TIM3_CH2, SPI1_MOSI, USART1_CK and TIM16_BKIN. |
| 42 | PB6 | bidirectional | 5 V-tolerant Fm+ capable GPIO (FT_f); alternate functions include LPTIM1_ETR, I2C1_SCL, I2C2_SCL, USART1_TX and LPUART2_TX. |
| 43 | PB7 | bidirectional | 5 V-tolerant GPIO with analog switch and Fm+ capability (FT_fa); alternate functions include LPTIM1_IN2, I2C1_SDA, I2C2_SDA, USART1_RX and LPUART2_RX. |
| 44 | PF3-BOOT0 | bidirectional | 5 V-tolerant GPIO (FT) that also carries the BOOT0 boot-mode function. |
| 45 | PB8 | bidirectional | 5 V-tolerant Fm+ capable GPIO (FT_f); alternate functions include LPTIM1_IN2, I2C2_SCL, I2C1_SCL, USART3_TX and TIM16_CH1. |
| 46 | PB9 | bidirectional | 5 V-tolerant Fm+ capable GPIO (FT_f); alternate functions include IR_OUT, I2C2_SDA, I2C1_SDA, SPI2_NSS, USART3_RX and LPTIM1_CH4. |
| 47 | VSS | power_in | Ground pin that must be connected to the external power supply ground within the permitted range. |
| 48 | VDD | power_in | Main supply pin, 1.71 V to 3.6 V (standard operating voltage), which must be decoupled close to the pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ST(意法半导体) |
| Package | LQFP-48(7x7) |
| Category | |
| Pins | 48 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Internal AHB clock frequency | fHCLK | 0 | 56 | MHz | 42 | ||
| Internal APB clock frequency | fPCLK | 0 | 56 | MHz | 42 | ||
| Standard operating voltage | VDD | 1.71 | 3.6 | V | 42 | ||
| Analog supply voltage, ADC or COMP used | VDDA | 1.62 | 3.6 | V | ADC or COMP used | 42 | |
| Analog supply voltage, OPAMP used | VDDA | 1.8 | V | OPAMP used; max not printed separately | 42 | ||
| Analog supply voltage, ADC, OPAMP, COMP not used | VDDA | 0 | V | ADC, OPAMP, COMP not used; max not printed separately | 42 | ||
| Backup domain supply voltage | VBAT | 1.55 | 3.6 | V | 42 | ||
| I/O input voltage, TT_xx I/Os | VIN | -0.3 | V | TT_xx I/Os; max printed as VDDIOx + 0.3 | 42 | ||
| I/O input voltage, all I/Os except TT_xx | VIN | -0.3 | V | All I/Os except TT_xx pins; max printed as Min(Min(VDD, VDDA) + 3.6, 5.5) | 42 | ||
| Ambient temperature, suffix 6, maximum power dissipation | TA | -40 | 85 | °C | Suffix 6, maximum power dissipation | 42 | |
| Ambient temperature, suffix 6, low-power dissipation | TA | 105 | °C | Suffix 6, low-power dissipation; min not printed separately | 42 | ||
| Junction temperature range, suffix 6 | TJ | -40 | 105 | °C | Suffix 6 version | 42 | |
| External main supply voltage (VDD, VDDA, VBAT) to VSS | VDDX - VSS | -0.3 | 4 | V | 41 | ||
| Input voltage on FT_xxx pins | VIN | -0.3 | V | Max printed as min(VDD, VDDA) + 4.0; pull-up/pull-down must be disabled to sustain voltage above 4 V | 41 | ||
| Input voltage on TT_xx pins | VIN | -0.3 | 4 | V | TT_xx pins; min printed as VSS - 0.3 | 41 | |
| Input voltage on any other pins | VIN | -0.3 | 4 | V | Any other pins; min printed as VSS - 0.3 | 41 | |
| Variation between different VDDX power pins of the same domain | /ΔVDDX/ | 50 | mV | 41 | |||
| Variation between all ground pins | /VSSx-VSS/ | 50 | mV | Including VREF- pin | 41 | ||
| Total current into sum of all VDD power lines (source) | ∑IVDD | 140 | mA | 41 | |||
| Total current out of sum of all VSS ground lines (sink) | ∑IVSS | 140 | mA | 41 | |||
| Maximum current into each VDD power pin (source) | IVDD(PIN) | 100 | mA | 41 | |||
| Maximum current out of each VSS ground pin (sink) | IVSS(PIN) | 100 | mA | 41 | |||
| Output current sunk by any I/O and control pin except FT_f | IIO(PIN) | 20 | mA | 41 | |||
| Output current sunk by any FT_f pin | IIO(PIN) | 20 | mA | FT_f pin | 41 | ||
| Output current sourced by any I/O and control pin | IIO(PIN) | 20 | mA | 41 | |||
| Total output current sunk by sum of all I/Os and control pins | ∑IIO(PIN) | 100 | mA | 41 | |||
| Total output current sourced by sum of all I/Os and control pins | ∑IIO(PIN) | 100 | mA | 41 | |||
| Injected current on FT_xxx, TT_xx, RST | IINJ(PIN) | -5 | 0 | mA | Printed as -5/+0 | 41 | |
| Total injected current (sum of all I/Os and control pins) | ∑/IINJ(PIN)/ | 25 | mA | 41 | |||
| Storage temperature range | TSTG | -65 | 150 | °C | 42 | ||
| Maximum junction temperature | TJ | 150 | °C | 42 | |||
| Brownout reset threshold 0, rising edge | VBOR0 | 1.62 | 1.66 | 1.7 | V | Rising edge | 43 |
| Brownout reset threshold 0, falling edge | VBOR0 | 1.6 | 1.64 | 1.69 | V | Falling edge | 43 |
| Reset temporization after BOR0 is detected | tRSTTEMPO | 250 | 400 | μs | VDD rising | 43 | |
| Internal reference voltage | VREFINT | 1.182 | 1.212 | 1.232 | V | -40 °C < TA < +130 °C | 44 |
| Internal reference voltage spread over the temperature range | ΔVREFINT | 5 | 7.5 | mV | VDD = 3 V | 44 | |
| Temperature coefficient | TCoeff | 30 | 50 | ppm/°C | -40°C < TA < +130°C | 44 | |
| Long term stability | ACoeff | 300 | 1000 | ppm | 1000 hours, T = 25°C | 44 | |
| Voltage coefficient | VDDCoeff | 250 | 1200 | ppm/V | 3.0 V < VDD < 3.6 V | 44 | |
| 1/4 reference voltage | VREFINT_DIV1 | 24 | 25 | 26 | % VREFINT | 44 | |
| 1/2 reference voltage | VREFINT_DIV2 | 49 | 50 | 51 | % VREFINT | 44 | |
| 3/4 reference voltage | VREFINT_DIV3 | 74 | 75 | 76 | % VREFINT | 44 | |
| Supply current in Run mode, 48 MHz | IDD (Run) | 3.75 | 4.25 | mA | fHCLK = fHSE, bypass mode, peripherals disabled, Range 1; typ at 25 °C, max at 85 °C column | 46 | |
| Supply current in Stop 2 mode, RTC disabled | IDD (Stop 2) | 560 | 20500 | nA | EN_ULP = 1, VDD 3.0 V; typ at 25 °C, max at 85 °C column | 57 | |
| Supply current in Standby mode, RTC disabled | IDD (Standby) | 70.5 | 6300 | nA | No independent watchdog, EN_ULP = 1, VDD 3.0 V; typ at 25 °C, max at 85 °C column | 58 | |
| Supply current in Shutdown mode, RTC disabled | IDD (Shutdown) | 50 | 2250 | nA | EN_ULP = 0, VDD 3.0 V; typ at 25 °C, max at 85 °C column | 60 | |
| Supply current in VBAT mode, RTC disabled | IDD (VBAT) | 9.5 | 110 | nA | VBAT 3.0 V; typ at 25 °C, max at 85 °C column | 60 | |
| Internal HSI16 frequency | fHSI16 | 15.88 | 16.08 | MHz | VDD=3.0 V, TA=30 °C | 69 | |
| HSI16 oscillator frequency drift over temperature | ΔTemp(HSI16) | -1 | 1 | % | TA = 0 to 85 °C | 69 | |
| LSI oscillator frequency | fLSI | 29.5 | 34 | kHz | VDD = 1.62 to 3.6 V, TA = -40 to 125 °C | 72 | |
| High-speed external oscillator frequency | fOSC_IN | 4 | 48 | MHz | 67 | ||
| Flash endurance | NEND | 10 | kcycles | TA = -40 to +105 °C | 74 | ||
| Flash data retention | tRET | 30 | Years | 1 kcycle at TA = 85 °C | 74 |
CAD (KiCad official)
- Symbol:
STM32U031C6T6 - Footprint:
Package_QFP:LQFP-48_7x7mm_P0.5mm - 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
- 3D model files:
stm32u031c6t6-etched.step/stm32u031c6t6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32u031c6t6.step/stm32u031c6t6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: ST(意法半导体) datasheet (134 pp, sha256
bc1d0cecfff8f152, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# STM32U031C6T6
**ST(意法半导体)** · IC · LQFP-48(7x7)
STM32U031C6T6 from ST(意法半导体), in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VBAT | power_in | Backup domain supply input, 1.55 V to 3.6 V, that keeps the RTC, LSE and backup registers powered when VDD is unavailable. |
| 2 | PC13 | bidirectional | 5 V-tolerant (FT) GPIO supplied through the power switch, which limits it to 3 mA sourcing; output speed must not exceed 2 MHz at 30 pF and it must not be used as a current source (for example to drive an LED); also WKUP2, TAMP_IN1 and RTC_TS/RTC_OUT1. |
| 3 | PC14-OSC32_IN | bidirectional | 5 V-tolerant (FT) GPIO on the power-switch domain with the same 3 mA and 2 MHz / 30 pF output limits, which also serves as the 32.768 kHz LSE oscillator input OSC32_IN. |
| 4 | PC15-OSC32_OUT | bidirectional | 5 V-tolerant (FT) GPIO on the power-switch domain with the same 3 mA and 2 MHz / 30 pF output limits, which also serves as the 32.768 kHz LSE oscillator output OSC32_OUT. |
| 5 | PF0-OSC_IN | bidirectional | 5 V-tolerant (FT) GPIO that serves as the HSE crystal oscillator input OSC_IN (4 to 48 MHz crystal oscillator). |
| 6 | PF1-OSC_OUT | bidirectional | 5 V-tolerant (FT) GPIO that serves as the HSE crystal oscillator output OSC_OUT (4 to 48 MHz crystal oscillator). |
| 7 | PF2-NRST | bidirectional | Bidirectional reset pin with embedded weak pull-up resistor (RST type), also available as MCO output. |
| 8 | VSSA/VREF- | power_in | Analog ground and negative ADC/DAC reference pin; all ground pins must stay within 50 mV of each other, including VREF-. |
| 9 | VDDA/VREF+ | power_in | Analog supply, 1.62 V to 3.6 V when ADC or COMP is used (1.8 V minimum with OPAMP), and positive ADC reference VREF+, which is internally connected to VDDA. |
| 10 | PA0 | bidirectional | 5 V-tolerant analog-switch GPIO (FT_a); alternate functions include TIM2_CH1, USART2_CTS, COMP1_OUT, WKUP1 and ADC1_IN5. |
| 11 | PA1 | bidirectional | 5 V-tolerant analog-switch GPIO (FT_a); alternate functions include TIM2_CH2, SPI1_SCK, USART2_RTS/USART2_DE, WKUP3 and ADC1_IN6. |
| 12 | PA2 | bidirectional | 5 V-tolerant analog-switch GPIO (FT_a); alternate functions include USART2_TX, LPUART1_TX, TIM15_CH1, WKUP4/LSCO and ADC1_IN7. |
| 13 | PA3 | bidirectional | 3.6 V-tolerant analog-switch GPIO (TT_a); alternate functions include USART2_RX, LPUART1_RX, TIM15_CH2, OPAMP1_VOUT and ADC1_IN8. |
| 14 | PA4 | bidirectional | 3.6 V-tolerant analog-switch GPIO (TT_a); alternate functions include SPI1_NSS, USART2_CK, LPTIM2_CH1, DAC1_OUT1 and ADC1_IN9. |
| 15 | PA5 | bidirectional | 5 V-tolerant analog-switch GPIO (FT_a); alternate functions include TIM2_CH1, TIM2_ETR, SPI1_SCK, USART3_TX, LPTIM2_ETR and ADC1_IN10. |
| 16 | PA6 | bidirectional | 5 V-tolerant analog-switch GPIO (FT_a); alternate functions include TIM1_BKIN, TIM3_CH1, SPI1_MISO, COMP1_OUT, TIM16_CH1 and ADC1_IN11. |
| 17 | PA7 | bidirectional | 5 V-tolerant GPIO with analog switch supplied by VDDA and Fm+ capability (FT_fa); alternate functions include TIM1_CH1N, TIM3_CH2, SPI1_MOSI, I2C2_SCL/I2C3_SCL and ADC1_IN15. |
| 18 | PB0 | bidirectional | 5 V-tolerant analog-switch GPIO (FT_a); alternate functions include TIM1_CH2N, TIM3_CH3, SPI1_NSS, USART3_CK, COMP1_OUT and ADC1_IN18. |
| 19 | PB1 | bidirectional | 5 V-tolerant analog-switch GPIO (FT_a); alternate functions include TIM1_CH3N, TIM3_CH4, USART3_RTS/USART3_DE, LPUART1_RTS/LPUART1_DE, COMP1_INM2 and ADC1_IN19. |
| 20 | PB2 | bidirectional | 5 V-tolerant analog-switch GPIO (FT_a); alternate functions include RTC_OUT2, LPTIM1_CH1, COMP1_INP2 and RTC_OUT2. |
| 21 | PB10 | bidirectional | 5 V-tolerant Fm+ capable GPIO (FT_f); alternate functions include TIM2_CH3, I2C2_SCL, SPI2_SCK, USART3_TX, LPUART1_RX and COMP1_OUT. |
| 22 | PB11 | bidirectional | 5 V-tolerant Fm+ capable GPIO (FT_f); alternate functions include TIM2_CH4, I2C2_SDA, USART3_RX, LPUART1_TX and LPUART2_TX. |
| 23 | VSS | power_in | Ground pin that must be connected to the external power supply ground within the permitted range. |
| 24 | VDD | power_in | Main supply pin, 1.71 V to 3.6 V (standard operating voltage), which must be decoupled close to the pin. |
| 25 | PB12 | bidirectional | 5 V-tolerant GPIO (FT); alternate functions include TIM1_BKIN, SPI2_NSS, USART3_CK, LPUART1_RTS/LPUART1_DE and TIM15_BKIN. |
| 26 | PB13 | bidirectional | 5 V-tolerant Fm+ capable GPIO (FT_f); alternate functions include TIM1_CH1N, I2C2_SCL, SPI2_SCK, USART3_CTS and TIM15_CH1N. |
| 27 | PB14 | bidirectional | 5 V-tolerant Fm+ capable GPIO (FT_f); alternate functions include TIM1_CH2N, I2C2_SDA, SPI2_MISO, USART3_RTS/USART3_DE and TIM15_CH1. |
| 28 | PB15 | bidirectional | 5 V-tolerant GPIO (FT); alternate functions include RTC_REFIN, TIM1_CH3N, SPI2_MOSI, TIM15_CH2, WKUP7 and TAMP_IN3. |
| 29 | PA8 | bidirectional | 5 V-tolerant GPIO (FT); alternate functions include MCO, TIM1_CH1, MCO2, USART1_CK and LPTIM2_CH1. |
| 30 | PA9 | bidirectional | 5 V-tolerant GPIO with analog switch and Fm+ capability (FT_fa); alternate functions include MCO, TIM1_CH2, I2C1_SCL, USART1_TX and COMP1_INP4, and it can be remapped in place of PA11 via SYSCFG_CFGR1. |
| 31 | PA10 | bidirectional | 5 V-tolerant Fm+ capable GPIO (FT_f); alternate functions include TIM1_CH3, MCO2, I2C1_SDA, SPI2_NSS and USART1_RX, and it can be remapped in place of PA12 via SYSCFG_CFGR1. |
| 32 | PA11 [PA9] | bidirectional | 5 V-tolerant GPIO (FT, note 3); default function is PA11 with alternate functions TIM1_CH4, TIM1_BKIN2, SPI1_MISO, USART1_CTS and COMP1_OUT, and it can be remapped to PA9 via SYSCFG_CFGR1. |
| 33 | PA12 [PA10] | bidirectional | 5 V-tolerant GPIO (FT, note 3); default function is PA12 with alternate functions TIM1_ETR, SPI1_MOSI, SPI2_MOSI and USART1_RTS/USART1_DE, and it can be remapped to PA10 via SYSCFG_CFGR1. |
| 34 | PA13 (SWDIO) | bidirectional | 5 V-tolerant GPIO (FT, note 4) that is the SWDIO debug pin, with the internal pull-up activated after reset; also IR_OUT and TSC_G7_IO4. |
| 35 | VSS | power_in | Ground pin that must be connected to the external power supply ground within the permitted range. |
| 36 | VDD | power_in | Main supply pin, 1.71 V to 3.6 V (standard operating voltage), which must be decoupled close to the pin. |
| 37 | PA14 (SWCLK) | bidirectional | 5 V-tolerant GPIO (FT, note 4) that is the SWCLK debug pin, with the internal pull-down activated after reset; also LPTIM1_CH1 and TSC_G3_IO4. |
| 38 | PA15 | bidirectional | 5 V-tolerant GPIO (FT); alternate functions include TIM2_CH1, TIM2_ETR, USART2_RX, SPI1_NSS, USART3_RTS/USART3_DE and USART4_RTS/USART4_DE. |
| 39 | PB3 | bidirectional | 5 V-tolerant GPIO with analog switch and Fm+ capability (FT_fa); alternate functions include TIM2_CH2, LPTIM1_CH3, I2C2_SCL, I2C3_SCL, SPI1_SCK and USART1_RTS/USART1_DE. |
| 40 | PB4 | bidirectional | 5 V-tolerant Fm+ capable GPIO (FT_f); alternate functions include LPTIM1_CH4, TIM3_CH1, I2C2_SDA, I2C3_SDA, SPI1_MISO and USART1_CTS. |
| 41 | PB5 | bidirectional | 5 V-tolerant GPIO (FT); alternate functions include LPTIM1_IN1, TIM3_CH2, SPI1_MOSI, USART1_CK and TIM16_BKIN. |
| 42 | PB6 | bidirectional | 5 V-tolerant Fm+ capable GPIO (FT_f); alternate functions include LPTIM1_ETR, I2C1_SCL, I2C2_SCL, USART1_TX and LPUART2_TX. |
| 43 | PB7 | bidirectional | 5 V-tolerant GPIO with analog switch and Fm+ capability (FT_fa); alternate functions include LPTIM1_IN2, I2C1_SDA, I2C2_SDA, USART1_RX and LPUART2_RX. |
| 44 | PF3-BOOT0 | bidirectional | 5 V-tolerant GPIO (FT) that also carries the BOOT0 boot-mode function. |
| 45 | PB8 | bidirectional | 5 V-tolerant Fm+ capable GPIO (FT_f); alternate functions include LPTIM1_IN2, I2C2_SCL, I2C1_SCL, USART3_TX and TIM16_CH1. |
| 46 | PB9 | bidirectional | 5 V-tolerant Fm+ capable GPIO (FT_f); alternate functions include IR_OUT, I2C2_SDA, I2C1_SDA, SPI2_NSS, USART3_RX and LPTIM1_CH4. |
| 47 | VSS | power_in | Ground pin that must be connected to the external power supply ground within the permitted range. |
| 48 | VDD | power_in | Main supply pin, 1.71 V to 3.6 V (standard operating voltage), which must be decoupled close to the pin. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ST(意法半导体) |
| Package | LQFP-48(7x7) |
| Category | |
| Pins | 48 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Internal AHB clock frequency | fHCLK | 0 | | 56 | MHz | | 42 |
| Internal APB clock frequency | fPCLK | 0 | | 56 | MHz | | 42 |
| Standard operating voltage | VDD | 1.71 | | 3.6 | V | | 42 |
| Analog supply voltage, ADC or COMP used | VDDA | 1.62 | | 3.6 | V | ADC or COMP used | 42 |
| Analog supply voltage, OPAMP used | VDDA | 1.8 | | | V | OPAMP used; max not printed separately | 42 |
| Analog supply voltage, ADC, OPAMP, COMP not used | VDDA | 0 | | | V | ADC, OPAMP, COMP not used; max not printed separately | 42 |
| Backup domain supply voltage | VBAT | 1.55 | | 3.6 | V | | 42 |
| I/O input voltage, TT_xx I/Os | VIN | -0.3 | | | V | TT_xx I/Os; max printed as VDDIOx + 0.3 | 42 |
| I/O input voltage, all I/Os except TT_xx | VIN | -0.3 | | | V | All I/Os except TT_xx pins; max printed as Min(Min(VDD, VDDA) + 3.6, 5.5) | 42 |
| Ambient temperature, suffix 6, maximum power dissipation | TA | -40 | | 85 | °C | Suffix 6, maximum power dissipation | 42 |
| Ambient temperature, suffix 6, low-power dissipation | TA | | | 105 | °C | Suffix 6, low-power dissipation; min not printed separately | 42 |
| Junction temperature range, suffix 6 | TJ | -40 | | 105 | °C | Suffix 6 version | 42 |
| External main supply voltage (VDD, VDDA, VBAT) to VSS | VDDX - VSS | -0.3 | | 4 | V | | 41 |
| Input voltage on FT_xxx pins | VIN | -0.3 | | | V | Max printed as min(VDD, VDDA) + 4.0; pull-up/pull-down must be disabled to sustain voltage above 4 V | 41 |
| Input voltage on TT_xx pins | VIN | -0.3 | | 4 | V | TT_xx pins; min printed as VSS - 0.3 | 41 |
| Input voltage on any other pins | VIN | -0.3 | | 4 | V | Any other pins; min printed as VSS - 0.3 | 41 |
| Variation between different VDDX power pins of the same domain | /ΔVDDX/ | | | 50 | mV | | 41 |
| Variation between all ground pins | /VSSx-VSS/ | | | 50 | mV | Including VREF- pin | 41 |
| Total current into sum of all VDD power lines (source) | ∑IVDD | | | 140 | mA | | 41 |
| Total current out of sum of all VSS ground lines (sink) | ∑IVSS | | | 140 | mA | | 41 |
| Maximum current into each VDD power pin (source) | IVDD(PIN) | | | 100 | mA | | 41 |
| Maximum current out of each VSS ground pin (sink) | IVSS(PIN) | | | 100 | mA | | 41 |
| Output current sunk by any I/O and control pin except FT_f | IIO(PIN) | | | 20 | mA | | 41 |
| Output current sunk by any FT_f pin | IIO(PIN) | | | 20 | mA | FT_f pin | 41 |
| Output current sourced by any I/O and control pin | IIO(PIN) | | | 20 | mA | | 41 |
| Total output current sunk by sum of all I/Os and control pins | ∑IIO(PIN) | | | 100 | mA | | 41 |
| Total output current sourced by sum of all I/Os and control pins | ∑IIO(PIN) | | | 100 | mA | | 41 |
| Injected current on FT_xxx, TT_xx, RST | IINJ(PIN) | -5 | | 0 | mA | Printed as -5/+0 | 41 |
| Total injected current (sum of all I/Os and control pins) | ∑/IINJ(PIN)/ | | | 25 | mA | | 41 |
| Storage temperature range | TSTG | -65 | | 150 | °C | | 42 |
| Maximum junction temperature | TJ | | | 150 | °C | | 42 |
| Brownout reset threshold 0, rising edge | VBOR0 | 1.62 | 1.66 | 1.7 | V | Rising edge | 43 |
| Brownout reset threshold 0, falling edge | VBOR0 | 1.6 | 1.64 | 1.69 | V | Falling edge | 43 |
| Reset temporization after BOR0 is detected | tRSTTEMPO | | 250 | 400 | μs | VDD rising | 43 |
| Internal reference voltage | VREFINT | 1.182 | 1.212 | 1.232 | V | -40 °C < TA < +130 °C | 44 |
| Internal reference voltage spread over the temperature range | ΔVREFINT | | 5 | 7.5 | mV | VDD = 3 V | 44 |
| Temperature coefficient | TCoeff | | 30 | 50 | ppm/°C | -40°C < TA < +130°C | 44 |
| Long term stability | ACoeff | | 300 | 1000 | ppm | 1000 hours, T = 25°C | 44 |
| Voltage coefficient | VDDCoeff | | 250 | 1200 | ppm/V | 3.0 V < VDD < 3.6 V | 44 |
| 1/4 reference voltage | VREFINT_DIV1 | 24 | 25 | 26 | % VREFINT | | 44 |
| 1/2 reference voltage | VREFINT_DIV2 | 49 | 50 | 51 | % VREFINT | | 44 |
| 3/4 reference voltage | VREFINT_DIV3 | 74 | 75 | 76 | % VREFINT | | 44 |
| Supply current in Run mode, 48 MHz | IDD (Run) | | 3.75 | 4.25 | mA | fHCLK = fHSE, bypass mode, peripherals disabled, Range 1; typ at 25 °C, max at 85 °C column | 46 |
| Supply current in Stop 2 mode, RTC disabled | IDD (Stop 2) | | 560 | 20500 | nA | EN_ULP = 1, VDD 3.0 V; typ at 25 °C, max at 85 °C column | 57 |
| Supply current in Standby mode, RTC disabled | IDD (Standby) | | 70.5 | 6300 | nA | No independent watchdog, EN_ULP = 1, VDD 3.0 V; typ at 25 °C, max at 85 °C column | 58 |
| Supply current in Shutdown mode, RTC disabled | IDD (Shutdown) | | 50 | 2250 | nA | EN_ULP = 0, VDD 3.0 V; typ at 25 °C, max at 85 °C column | 60 |
| Supply current in VBAT mode, RTC disabled | IDD (VBAT) | | 9.5 | 110 | nA | VBAT 3.0 V; typ at 25 °C, max at 85 °C column | 60 |
| Internal HSI16 frequency | fHSI16 | 15.88 | | 16.08 | MHz | VDD=3.0 V, TA=30 °C | 69 |
| HSI16 oscillator frequency drift over temperature | ΔTemp(HSI16) | -1 | | 1 | % | TA = 0 to 85 °C | 69 |
| LSI oscillator frequency | fLSI | 29.5 | | 34 | kHz | VDD = 1.62 to 3.6 V, TA = -40 to 125 °C | 72 |
| High-speed external oscillator frequency | fOSC_IN | 4 | | 48 | MHz | | 67 |
| Flash endurance | NEND | 10 | | | kcycles | TA = -40 to +105 °C | 74 |
| Flash data retention | tRET | 30 | | | Years | 1 kcycle at TA = 85 °C | 74 |
## CAD (KiCad official)
- Symbol: `STM32U031C6T6`
- Footprint: `Package_QFP:LQFP-48_7x7mm_P0.5mm`
- 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
- 3D model files: `stm32u031c6t6-etched.step` / `stm32u031c6t6-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32u031c6t6.step` / `stm32u031c6t6.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [ST(意法半导体) datasheet](https://www.st.com/resource/en/datasheet/stm32u031c6.pdf) (134 pp, sha256 `bc1d0cecfff8f152`, retrieved 2026-11-13, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/stm32u031c6t6-datasheet.pdf)