main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers stm32u031c6t6: viewers rendered from the public page · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
stm32u031c6t6-etched.glb stm32u031c6t6: factory component page (tier=mfr) · Ray
stm32u031c6t6-etched.step stm32u031c6t6: factory component page (tier=mfr) · Ray
stm32u031c6t6-hero.glb stm32u031c6t6: hero GLB from the etched model (keeps the MPN mark) · Ray
stm32u031c6t6-hero.overlay.json stm32u031c6t6: hero GLB from the etched model (keeps the MPN mark) · Ray
stm32u031c6t6.glb Publish 0.1.0 · Ray
stm32u031c6t6.kicad_mod Publish 0.1.0 · Ray
stm32u031c6t6.kicad_sym Publish 0.1.0 · Ray
stm32u031c6t6.lbr Publish 0.1.0 · Ray
stm32u031c6t6.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 48 pins · Ray

STM32U031C6T6

ST(意法半导体) · IC · LQFP-48(7x7)

STM32U031C6T6 from ST(意法半导体), in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VBAT power_in Backup domain supply input, 1.55 V to 3.6 V, that keeps the RTC, LSE and backup registers powered when VDD is unavailable.
2 PC13 bidirectional 5 V-tolerant (FT) GPIO supplied through the power switch, which limits it to 3 mA sourcing; output speed must not exceed 2 MHz at 30 pF and it must not be used as a current source (for example to drive an LED); also WKUP2, TAMP_IN1 and RTC_TS/RTC_OUT1.
3 PC14-OSC32_IN bidirectional 5 V-tolerant (FT) GPIO on the power-switch domain with the same 3 mA and 2 MHz / 30 pF output limits, which also serves as the 32.768 kHz LSE oscillator input OSC32_IN.
4 PC15-OSC32_OUT bidirectional 5 V-tolerant (FT) GPIO on the power-switch domain with the same 3 mA and 2 MHz / 30 pF output limits, which also serves as the 32.768 kHz LSE oscillator output OSC32_OUT.
5 PF0-OSC_IN bidirectional 5 V-tolerant (FT) GPIO that serves as the HSE crystal oscillator input OSC_IN (4 to 48 MHz crystal oscillator).
6 PF1-OSC_OUT bidirectional 5 V-tolerant (FT) GPIO that serves as the HSE crystal oscillator output OSC_OUT (4 to 48 MHz crystal oscillator).
7 PF2-NRST bidirectional Bidirectional reset pin with embedded weak pull-up resistor (RST type), also available as MCO output.
8 VSSA/VREF- power_in Analog ground and negative ADC/DAC reference pin; all ground pins must stay within 50 mV of each other, including VREF-.
9 VDDA/VREF+ power_in Analog supply, 1.62 V to 3.6 V when ADC or COMP is used (1.8 V minimum with OPAMP), and positive ADC reference VREF+, which is internally connected to VDDA.
10 PA0 bidirectional 5 V-tolerant analog-switch GPIO (FT_a); alternate functions include TIM2_CH1, USART2_CTS, COMP1_OUT, WKUP1 and ADC1_IN5.
11 PA1 bidirectional 5 V-tolerant analog-switch GPIO (FT_a); alternate functions include TIM2_CH2, SPI1_SCK, USART2_RTS/USART2_DE, WKUP3 and ADC1_IN6.
12 PA2 bidirectional 5 V-tolerant analog-switch GPIO (FT_a); alternate functions include USART2_TX, LPUART1_TX, TIM15_CH1, WKUP4/LSCO and ADC1_IN7.
13 PA3 bidirectional 3.6 V-tolerant analog-switch GPIO (TT_a); alternate functions include USART2_RX, LPUART1_RX, TIM15_CH2, OPAMP1_VOUT and ADC1_IN8.
14 PA4 bidirectional 3.6 V-tolerant analog-switch GPIO (TT_a); alternate functions include SPI1_NSS, USART2_CK, LPTIM2_CH1, DAC1_OUT1 and ADC1_IN9.
15 PA5 bidirectional 5 V-tolerant analog-switch GPIO (FT_a); alternate functions include TIM2_CH1, TIM2_ETR, SPI1_SCK, USART3_TX, LPTIM2_ETR and ADC1_IN10.
16 PA6 bidirectional 5 V-tolerant analog-switch GPIO (FT_a); alternate functions include TIM1_BKIN, TIM3_CH1, SPI1_MISO, COMP1_OUT, TIM16_CH1 and ADC1_IN11.
17 PA7 bidirectional 5 V-tolerant GPIO with analog switch supplied by VDDA and Fm+ capability (FT_fa); alternate functions include TIM1_CH1N, TIM3_CH2, SPI1_MOSI, I2C2_SCL/I2C3_SCL and ADC1_IN15.
18 PB0 bidirectional 5 V-tolerant analog-switch GPIO (FT_a); alternate functions include TIM1_CH2N, TIM3_CH3, SPI1_NSS, USART3_CK, COMP1_OUT and ADC1_IN18.
19 PB1 bidirectional 5 V-tolerant analog-switch GPIO (FT_a); alternate functions include TIM1_CH3N, TIM3_CH4, USART3_RTS/USART3_DE, LPUART1_RTS/LPUART1_DE, COMP1_INM2 and ADC1_IN19.
20 PB2 bidirectional 5 V-tolerant analog-switch GPIO (FT_a); alternate functions include RTC_OUT2, LPTIM1_CH1, COMP1_INP2 and RTC_OUT2.
21 PB10 bidirectional 5 V-tolerant Fm+ capable GPIO (FT_f); alternate functions include TIM2_CH3, I2C2_SCL, SPI2_SCK, USART3_TX, LPUART1_RX and COMP1_OUT.
22 PB11 bidirectional 5 V-tolerant Fm+ capable GPIO (FT_f); alternate functions include TIM2_CH4, I2C2_SDA, USART3_RX, LPUART1_TX and LPUART2_TX.
23 VSS power_in Ground pin that must be connected to the external power supply ground within the permitted range.
24 VDD power_in Main supply pin, 1.71 V to 3.6 V (standard operating voltage), which must be decoupled close to the pin.
25 PB12 bidirectional 5 V-tolerant GPIO (FT); alternate functions include TIM1_BKIN, SPI2_NSS, USART3_CK, LPUART1_RTS/LPUART1_DE and TIM15_BKIN.
26 PB13 bidirectional 5 V-tolerant Fm+ capable GPIO (FT_f); alternate functions include TIM1_CH1N, I2C2_SCL, SPI2_SCK, USART3_CTS and TIM15_CH1N.
27 PB14 bidirectional 5 V-tolerant Fm+ capable GPIO (FT_f); alternate functions include TIM1_CH2N, I2C2_SDA, SPI2_MISO, USART3_RTS/USART3_DE and TIM15_CH1.
28 PB15 bidirectional 5 V-tolerant GPIO (FT); alternate functions include RTC_REFIN, TIM1_CH3N, SPI2_MOSI, TIM15_CH2, WKUP7 and TAMP_IN3.
29 PA8 bidirectional 5 V-tolerant GPIO (FT); alternate functions include MCO, TIM1_CH1, MCO2, USART1_CK and LPTIM2_CH1.
30 PA9 bidirectional 5 V-tolerant GPIO with analog switch and Fm+ capability (FT_fa); alternate functions include MCO, TIM1_CH2, I2C1_SCL, USART1_TX and COMP1_INP4, and it can be remapped in place of PA11 via SYSCFG_CFGR1.
31 PA10 bidirectional 5 V-tolerant Fm+ capable GPIO (FT_f); alternate functions include TIM1_CH3, MCO2, I2C1_SDA, SPI2_NSS and USART1_RX, and it can be remapped in place of PA12 via SYSCFG_CFGR1.
32 PA11 [PA9] bidirectional 5 V-tolerant GPIO (FT, note 3); default function is PA11 with alternate functions TIM1_CH4, TIM1_BKIN2, SPI1_MISO, USART1_CTS and COMP1_OUT, and it can be remapped to PA9 via SYSCFG_CFGR1.
33 PA12 [PA10] bidirectional 5 V-tolerant GPIO (FT, note 3); default function is PA12 with alternate functions TIM1_ETR, SPI1_MOSI, SPI2_MOSI and USART1_RTS/USART1_DE, and it can be remapped to PA10 via SYSCFG_CFGR1.
34 PA13 (SWDIO) bidirectional 5 V-tolerant GPIO (FT, note 4) that is the SWDIO debug pin, with the internal pull-up activated after reset; also IR_OUT and TSC_G7_IO4.
35 VSS power_in Ground pin that must be connected to the external power supply ground within the permitted range.
36 VDD power_in Main supply pin, 1.71 V to 3.6 V (standard operating voltage), which must be decoupled close to the pin.
37 PA14 (SWCLK) bidirectional 5 V-tolerant GPIO (FT, note 4) that is the SWCLK debug pin, with the internal pull-down activated after reset; also LPTIM1_CH1 and TSC_G3_IO4.
38 PA15 bidirectional 5 V-tolerant GPIO (FT); alternate functions include TIM2_CH1, TIM2_ETR, USART2_RX, SPI1_NSS, USART3_RTS/USART3_DE and USART4_RTS/USART4_DE.
39 PB3 bidirectional 5 V-tolerant GPIO with analog switch and Fm+ capability (FT_fa); alternate functions include TIM2_CH2, LPTIM1_CH3, I2C2_SCL, I2C3_SCL, SPI1_SCK and USART1_RTS/USART1_DE.
40 PB4 bidirectional 5 V-tolerant Fm+ capable GPIO (FT_f); alternate functions include LPTIM1_CH4, TIM3_CH1, I2C2_SDA, I2C3_SDA, SPI1_MISO and USART1_CTS.
41 PB5 bidirectional 5 V-tolerant GPIO (FT); alternate functions include LPTIM1_IN1, TIM3_CH2, SPI1_MOSI, USART1_CK and TIM16_BKIN.
42 PB6 bidirectional 5 V-tolerant Fm+ capable GPIO (FT_f); alternate functions include LPTIM1_ETR, I2C1_SCL, I2C2_SCL, USART1_TX and LPUART2_TX.
43 PB7 bidirectional 5 V-tolerant GPIO with analog switch and Fm+ capability (FT_fa); alternate functions include LPTIM1_IN2, I2C1_SDA, I2C2_SDA, USART1_RX and LPUART2_RX.
44 PF3-BOOT0 bidirectional 5 V-tolerant GPIO (FT) that also carries the BOOT0 boot-mode function.
45 PB8 bidirectional 5 V-tolerant Fm+ capable GPIO (FT_f); alternate functions include LPTIM1_IN2, I2C2_SCL, I2C1_SCL, USART3_TX and TIM16_CH1.
46 PB9 bidirectional 5 V-tolerant Fm+ capable GPIO (FT_f); alternate functions include IR_OUT, I2C2_SDA, I2C1_SDA, SPI2_NSS, USART3_RX and LPTIM1_CH4.
47 VSS power_in Ground pin that must be connected to the external power supply ground within the permitted range.
48 VDD power_in Main supply pin, 1.71 V to 3.6 V (standard operating voltage), which must be decoupled close to the pin.

Key specifications

Parameter Value
Manufacturer ST(意法半导体)
Package LQFP-48(7x7)
Category
Pins 48

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Internal AHB clock frequency fHCLK 0 56 MHz 42
Internal APB clock frequency fPCLK 0 56 MHz 42
Standard operating voltage VDD 1.71 3.6 V 42
Analog supply voltage, ADC or COMP used VDDA 1.62 3.6 V ADC or COMP used 42
Analog supply voltage, OPAMP used VDDA 1.8 V OPAMP used; max not printed separately 42
Analog supply voltage, ADC, OPAMP, COMP not used VDDA 0 V ADC, OPAMP, COMP not used; max not printed separately 42
Backup domain supply voltage VBAT 1.55 3.6 V 42
I/O input voltage, TT_xx I/Os VIN -0.3 V TT_xx I/Os; max printed as VDDIOx + 0.3 42
I/O input voltage, all I/Os except TT_xx VIN -0.3 V All I/Os except TT_xx pins; max printed as Min(Min(VDD, VDDA) + 3.6, 5.5) 42
Ambient temperature, suffix 6, maximum power dissipation TA -40 85 °C Suffix 6, maximum power dissipation 42
Ambient temperature, suffix 6, low-power dissipation TA 105 °C Suffix 6, low-power dissipation; min not printed separately 42
Junction temperature range, suffix 6 TJ -40 105 °C Suffix 6 version 42
External main supply voltage (VDD, VDDA, VBAT) to VSS VDDX - VSS -0.3 4 V 41
Input voltage on FT_xxx pins VIN -0.3 V Max printed as min(VDD, VDDA) + 4.0; pull-up/pull-down must be disabled to sustain voltage above 4 V 41
Input voltage on TT_xx pins VIN -0.3 4 V TT_xx pins; min printed as VSS - 0.3 41
Input voltage on any other pins VIN -0.3 4 V Any other pins; min printed as VSS - 0.3 41
Variation between different VDDX power pins of the same domain /ΔVDDX/ 50 mV 41
Variation between all ground pins /VSSx-VSS/ 50 mV Including VREF- pin 41
Total current into sum of all VDD power lines (source) ∑IVDD 140 mA 41
Total current out of sum of all VSS ground lines (sink) ∑IVSS 140 mA 41
Maximum current into each VDD power pin (source) IVDD(PIN) 100 mA 41
Maximum current out of each VSS ground pin (sink) IVSS(PIN) 100 mA 41
Output current sunk by any I/O and control pin except FT_f IIO(PIN) 20 mA 41
Output current sunk by any FT_f pin IIO(PIN) 20 mA FT_f pin 41
Output current sourced by any I/O and control pin IIO(PIN) 20 mA 41
Total output current sunk by sum of all I/Os and control pins ∑IIO(PIN) 100 mA 41
Total output current sourced by sum of all I/Os and control pins ∑IIO(PIN) 100 mA 41
Injected current on FT_xxx, TT_xx, RST IINJ(PIN) -5 0 mA Printed as -5/+0 41
Total injected current (sum of all I/Os and control pins) ∑/IINJ(PIN)/ 25 mA 41
Storage temperature range TSTG -65 150 °C 42
Maximum junction temperature TJ 150 °C 42
Brownout reset threshold 0, rising edge VBOR0 1.62 1.66 1.7 V Rising edge 43
Brownout reset threshold 0, falling edge VBOR0 1.6 1.64 1.69 V Falling edge 43
Reset temporization after BOR0 is detected tRSTTEMPO 250 400 μs VDD rising 43
Internal reference voltage VREFINT 1.182 1.212 1.232 V -40 °C < TA < +130 °C 44
Internal reference voltage spread over the temperature range ΔVREFINT 5 7.5 mV VDD = 3 V 44
Temperature coefficient TCoeff 30 50 ppm/°C -40°C < TA < +130°C 44
Long term stability ACoeff 300 1000 ppm 1000 hours, T = 25°C 44
Voltage coefficient VDDCoeff 250 1200 ppm/V 3.0 V < VDD < 3.6 V 44
1/4 reference voltage VREFINT_DIV1 24 25 26 % VREFINT 44
1/2 reference voltage VREFINT_DIV2 49 50 51 % VREFINT 44
3/4 reference voltage VREFINT_DIV3 74 75 76 % VREFINT 44
Supply current in Run mode, 48 MHz IDD (Run) 3.75 4.25 mA fHCLK = fHSE, bypass mode, peripherals disabled, Range 1; typ at 25 °C, max at 85 °C column 46
Supply current in Stop 2 mode, RTC disabled IDD (Stop 2) 560 20500 nA EN_ULP = 1, VDD 3.0 V; typ at 25 °C, max at 85 °C column 57
Supply current in Standby mode, RTC disabled IDD (Standby) 70.5 6300 nA No independent watchdog, EN_ULP = 1, VDD 3.0 V; typ at 25 °C, max at 85 °C column 58
Supply current in Shutdown mode, RTC disabled IDD (Shutdown) 50 2250 nA EN_ULP = 0, VDD 3.0 V; typ at 25 °C, max at 85 °C column 60
Supply current in VBAT mode, RTC disabled IDD (VBAT) 9.5 110 nA VBAT 3.0 V; typ at 25 °C, max at 85 °C column 60
Internal HSI16 frequency fHSI16 15.88 16.08 MHz VDD=3.0 V, TA=30 °C 69
HSI16 oscillator frequency drift over temperature ΔTemp(HSI16) -1 1 % TA = 0 to 85 °C 69
LSI oscillator frequency fLSI 29.5 34 kHz VDD = 1.62 to 3.6 V, TA = -40 to 125 °C 72
High-speed external oscillator frequency fOSC_IN 4 48 MHz 67
Flash endurance NEND 10 kcycles TA = -40 to +105 °C 74
Flash data retention tRET 30 Years 1 kcycle at TA = 85 °C 74

CAD (KiCad official)

  • Symbol: STM32U031C6T6
  • Footprint: Package_QFP:LQFP-48_7x7mm_P0.5mm
  • 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
  • 3D model files: stm32u031c6t6-etched.step / stm32u031c6t6-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm32u031c6t6.step / stm32u031c6t6.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: ST(意法半导体) datasheet (134 pp, sha256 bc1d0cecfff8f152, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF