main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers stm32l431kbu3: viewers rendered from the public page · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
stm32l431kbu3-etched.glb stm32l431kbu3: factory component page (tier=mfr) · Ray
stm32l431kbu3-etched.step stm32l431kbu3: factory component page (tier=mfr) · Ray
stm32l431kbu3-hero.glb stm32l431kbu3: hero GLB from the etched model (keeps the MPN mark) · Ray
stm32l431kbu3-hero.overlay.json stm32l431kbu3: hero GLB from the etched model (keeps the MPN mark) · Ray
stm32l431kbu3.glb Publish 0.1.0 · Ray
stm32l431kbu3.kicad_mod Publish 0.1.0 · Ray
stm32l431kbu3.kicad_sym Publish 0.1.0 · Ray
stm32l431kbu3.lbr Publish 0.1.0 · Ray
stm32l431kbu3.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 33 pins · Ray

STM32L431KBU3

STMicroelectronics · ST Microelectronics · UFQFPN-32(5x5)

STM32L431KBU3 from STMicroelectronics, in a UFQFPN-32(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 VDD power_in Main power supply pin; the standard operating voltage is 1.71 V to 3.6 V and the variation between VDD pins of the same domain must not exceed 50 mV.
2 PC14-OSC32_IN bidirectional FT I/O (5 V tolerant) that is supplied through the power switch and also serves as the LSE OSC32_IN; when used as a GPIO output it must not exceed 2 MHz with a 30 pF load, must not source current such as an LED, and the switch sinks only 3 mA.
3 PC15-OSC32_OUT bidirectional FT I/O (5 V tolerant) that is supplied through the power switch and also serves as the LSE OSC32_OUT; when used as a GPIO output it must not exceed 2 MHz with a 30 pF load, must not source current such as an LED, and the switch sinks only 3 mA.
4 NRST bidirectional Bidirectional reset pin with an embedded weak pull-up resistor.
5 VDDA/VREF+ power_in Analog supply pin: VDDA is 1.62 V to 3.6 V when the ADC or COMP is used, 1.8 V minimum when the DAC or OPAMP is used, and 2.4 V minimum when VREFBUF is used; VREF+ is internally connected to VDDA on this package.
6 PA0/CK_IN bidirectional FT_a I/O (5 V tolerant, analog switch supplied by VDDA) that also provides CK_IN, TIM2_CH1, USART2_CTS, COMP1_OUT, SAI1_EXTCLK, ADC1_IN5, WKUP1 and OPAMP1_VINP functions.
7 PA1 bidirectional FT_a I/O (5 V tolerant, analog switch supplied by VDDA) that also provides TIM2_CH2, I2C1_SMBA, SPI1_SCK, USART2_RTS_DE, TIM15_CH1N, ADC1_IN6, OPAMP1_VINM and COMP1_INP functions.
8 PA2 bidirectional FT_a I/O (5 V tolerant, analog switch supplied by VDDA) that also provides TIM2_CH3, USART2_TX, LPUART1_TX, QUADSPI_BK1_NCS, COMP2_OUT, TIM15_CH1, ADC1_IN7, COMP2_INM, WKUP4 and LSCO functions.
9 PA3 bidirectional TT_a I/O (3.6 V tolerant, analog switch supplied by VDDA) that also provides TIM2_CH4, USART2_RX, LPUART1_RX, QUADSPI_CLK, SAI1_MCLK_A, TIM15_CH2, ADC1_IN8, COMP2_INP and OPAMP1_VOUT functions.
10 PA4 bidirectional TT_a I/O (3.6 V tolerant, analog switch supplied by VDDA) that also provides SPI1_NSS, SPI3_NSS, USART2_CK, SAI1_FS_B, LPTIM2_OUT, ADC1_IN9, DAC1_OUT1, COMP1_INM and COMP2_INM functions.
11 PA5 bidirectional TT_a I/O (3.6 V tolerant, analog switch supplied by VDDA) that also provides TIM2_CH1, TIM2_ETR, SPI1_SCK, LPTIM2_ETR, ADC1_IN10, DAC1_OUT2, COMP1_INM and COMP2_INM functions.
12 PA6 bidirectional FT_a I/O (5 V tolerant, analog switch supplied by VDDA) that also provides TIM1_BKIN, SPI1_MISO, COMP1_OUT, USART3_CTS, LPUART1_CTS, QUADSPI_BK1_IO3, TIM1_BKIN_COMP2, TIM16_CH1 and ADC1_IN11 functions.
13 PA7 bidirectional FT_fa I/O (5 V tolerant, Fm+ capable, analog switch supplied by VDDA) that also provides TIM1_CH1N, I2C3_SCL, SPI1_MOSI, QUADSPI_BK1_IO2, COMP2_OUT and ADC1_IN12 functions.
14 PB0 bidirectional FT_a I/O (5 V tolerant, analog switch supplied by VDDA) that also provides TIM1_CH2N, SPI1_NSS, USART3_CK, QUADSPI_BK1_IO1, COMP1_OUT, SAI1_EXTCLK and ADC1_IN15 functions.
15 PB1 bidirectional FT_a I/O (5 V tolerant, analog switch supplied by VDDA) that also provides TIM1_CH3N, USART3_RTS_DE, LPUART1_RTS_DE, QUADSPI_BK1_IO0, LPTIM2_IN1, COMP1_INM and ADC1_IN16 functions.
16 VSS power_in Ground pin; the variation between all ground pins must not exceed 50 mV.
17 VDD power_in Main power supply pin; the standard operating voltage is 1.71 V to 3.6 V and the variation between VDD pins of the same domain must not exceed 50 mV.
18 PA8 bidirectional FT I/O (5 V tolerant) that also provides MCO, TIM1_CH1, USART1_CK, SWPMI1_IO, SAI1_SCK_A and LPTIM2_OUT functions.
19 PA9 bidirectional FT_f I/O (5 V tolerant, Fm+ capable) that also provides TIM1_CH2, I2C1_SCL, USART1_TX, SAI1_FS_A and TIM15_BKIN functions.
20 PA10 bidirectional FT_f I/O (5 V tolerant, Fm+ capable) that also provides TIM1_CH3, I2C1_SDA, USART1_RX and SAI1_SD_A functions.
21 PA11 bidirectional FT I/O (5 V tolerant) that also provides TIM1_CH4, TIM1_BKIN2, SPI1_MISO, COMP1_OUT, USART1_CTS, CAN1_RX and TIM1_BKIN2_COMP1 functions.
22 PA12 bidirectional FT I/O (5 V tolerant) that also provides TIM1_ETR, SPI1_MOSI, USART1_RTS_DE and CAN1_TX functions.
23 PA13 bidirectional FT I/O (5 V tolerant) that is configured as the JTMS-SWDIO debug function after reset with its internal pull-up enabled, and also provides IR_OUT, SWPMI1_TX and SAI1_SD_B functions.
24 PA14 bidirectional FT I/O (5 V tolerant) that is configured as the JTCK-SWCLK debug function after reset with its internal pull-down enabled, and also provides LPTIM1_OUT, I2C1_SMBA, SWPMI1_RX and SAI1_FS_B functions.
25 PA15 bidirectional FT I/O (5 V tolerant) that is configured as the JTDI debug function after reset with its internal pull-up enabled, and also provides TIM2_CH1, TIM2_ETR, USART2_RX, SPI1_NSS, SPI3_NSS, USART3_RTS_DE, TSC_G3_IO1 and SWPMI1_SUSPEND functions.
26 PB3 bidirectional FT_a I/O (5 V tolerant, analog switch supplied by VDDA) that is configured as the JTDO-TRACESWO debug function after reset and also provides TIM2_CH2, SPI1_SCK, SPI3_SCK, USART1_RTS_DE, SAI1_SCK_B and COMP2_INM functions.
27 PB4 bidirectional FT_fa I/O (5 V tolerant, Fm+ capable, analog switch supplied by VDDA) that is configured as the NJTRST debug function with its internal pull-up enabled after reset, and also provides I2C3_SDA, SPI1_MISO, SPI3_MISO, USART1_CTS, TSC_G2_IO1, SAI1_MCLK_B and COMP2_INP functions.
28 PB5 bidirectional FT I/O (5 V tolerant) that also provides LPTIM1_IN1, I2C1_SMBA, SPI1_MOSI, SPI3_MOSI, USART1_CK, TSC_G2_IO2, COMP2_OUT, SAI1_SD_B and TIM16_BKIN functions.
29 PB6 bidirectional FT_fa I/O (5 V tolerant, Fm+ capable, analog switch supplied by VDDA) that also provides LPTIM1_ETR, I2C1_SCL, USART1_TX, TSC_G2_IO3, SAI1_FS_B, TIM16_CH1N and COMP2_INP functions.
30 PB7 bidirectional FT_fa I/O (5 V tolerant, Fm+ capable, analog switch supplied by VDDA) that also provides LPTIM1_IN2, I2C1_SDA, USART1_RX, TSC_G2_IO4, COMP2_INM and PVD_IN functions.
31 PH3/BOOT0 bidirectional FT I/O (5 V tolerant) that also provides the BOOT0 boot-mode function and EVENTOUT.
32 VSS power_in Ground pin; the variation between all ground pins must not exceed 50 mV.
33 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package UFQFPN-32(5x5)
Category Embedded Processors & Controllers
Pins 33

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
External main supply voltage (VDD, VDDA, VBAT) vs VSS VDDX - VSS -0.3 4 V 86
Input voltage on TT_xx pins VIN 4 V Minimum printed as VSS-0.3 (formula, not converted) 86
Input voltage on any other pins VIN 4 V Minimum printed as VSS-0.3 (formula, not converted) 86
Variations between different VDDX power pins of the same domain /ΔVDDx/ 50 mV 86
Variations between all the different ground pins /VSSx-VSS/ 50 mV Include VREF- pin 86
Total current into sum of all VDD power lines (source) ∑IVDD 140 mA 87
Total current out of sum of all VSS ground lines (sink) ∑IVSS 140 mA 87
Maximum current into each VDD power pin (source) IVDD(PIN) 100 mA 87
Maximum current out of each VSS ground pin (sink) IVSS(PIN) 100 mA 87
Output current sunk by any I/O and control pin except FT_f IIO(PIN) 20 mA 87
Output current sunk by any FT_f pin IIO(PIN) 20 mA 87
Output current sourced by any I/O and control pin IIO(PIN) 20 mA 87
Total output current sunk by sum of all I/Os and control pins ∑IIO(PIN) 100 mA 87
Total output current sourced by sum of all I/Os and control pins ∑IIO(PIN) 100 mA 87
Injected current on FT_xxx, TT_xx, RST and B pins IINJ(PIN) -5 0 mA except PA4, PA5 87
Injected current on PA4, PA5 IINJ(PIN) -5 0 mA 87
Total injected current (sum of all I/Os and control pins) ∑/IINJ(PIN)/ 25 mA 87
Storage temperature range TSTG -65 150 °C 87
Maximum junction temperature TJ 150 °C 87
Internal AHB clock frequency fHCLK 0 80 MHz 88
Internal APB1 clock frequency fPCLK1 0 80 MHz 88
Internal APB2 clock frequency fPCLK2 0 80 MHz 88
Standard operating voltage VDD 1.71 3.6 V 88
Analog supply voltage VDDA 1.62 3.6 V ADC or COMP used 88
Analog supply voltage VDDA 1.8 3.6 V DAC or OPAMP used 88
Analog supply voltage VDDA 2.4 3.6 V VREFBUF used 88
Analog supply voltage VDDA 0 V ADC, DAC, OPAMP, COMP, VREFBUF not used 88
Backup operating voltage VBAT 1.55 3.6 V 88
I/O input voltage (TT_xx I/O) VIN -0.3 V TT_xx I/O; maximum printed as VDDIOx+0.3 (formula, not converted) 88
I/O input voltage (all I/O except TT_xx) VIN -0.3 V maximum printed as Min(Min(VDD,VDDA)+3.6 V, 5.5 V) (formula, not converted) 88
Ambient temperature, maximum power dissipation (suffix 3 version) TA -40 125 °C Suffix 3 version 88
Ambient temperature, low-power dissipation (suffix 3 version) TA -40 130 °C Suffix 3 version, low-power dissipation 88
Junction temperature range (suffix 3 version) TJ -40 130 °C Suffix 3 version 88
VDD rise time rate tVDD 0 µs/V maximum printed as ∞ 89
VDD fall time rate tVDD 10 µs/V maximum printed as ∞ 89
VDDA rise time rate tVDDA 0 µs/V maximum printed as ∞ 89
VDDA fall time rate tVDDA 10 µs/V maximum printed as ∞ 89
Reset temporization after BOR0 is detected tRSTTEMPO 250 400 µs VDD rising 89
Brown-out reset threshold 0 VBOR0 1.62 1.66 1.7 V Rising edge 89
Brown-out reset threshold 0 VBOR0 1.6 1.64 1.69 V Falling edge 89
Internal reference voltage VREFINT 1.182 1.212 1.232 V -40 °C < TA < +130 °C 91
ADC sampling time when reading the internal reference voltage tS_vrefint 4 µs 91
Start time of reference voltage buffer when ADC is enabled tstart_vrefint 8 12 µs 91
VREFINT buffer consumption from VDD when converted by ADC IDD(VREFINTBUF) 12.5 20 µA 91
Internal reference voltage spread over the temperature range ΔVREFINT 5 7.5 mV VDD = 3 V 91
Temperature coefficient TCoeff 30 50 ppm/°C -40°C < TA < +130°C 91
Long term stability ACoeff 300 1000 ppm 1000 hours, T = 25°C 91
Voltage coefficient VDDCoeff 250 1200 ppm/V 3.0 V < VDD < 3.6 V 91
1/4 reference voltage VREFINT_DIV1 24 25 26 % VREFINT 91
1/2 reference voltage VREFINT_DIV2 49 50 51 % VREFINT 91
3/4 reference voltage VREFINT_DIV3 74 75 76 % VREFINT 91
Supply current in Run mode (Range 1) IDD_ALL (Run) 8.53 9.5 mA Range 1, fHCLK = 80 MHz, all peripherals disabled, TA = 25 °C, ART enabled 94
Supply current in Run mode (Range 1) IDD_ALL (Run) 8.92 10.3 mA Range 1, fHCLK = 80 MHz, all peripherals disabled, TA = 125 °C, ART enabled 94
Supply current in Low-power run mode IDD_ALL (LPRun) 506 815.9 µA fHCLK = fMSI = 2 MHz, all peripherals disabled, TA = 125 °C, ART enabled 94
Supply current in Sleep mode (Range 1) IDD_ALL (Sleep) 2.23 2.5 mA Range 1, fHCLK = 80 MHz, all peripherals disabled, TA = 25 °C, Flash ON 99
Supply current in Stop 2 mode, RTC disabled IDD_ALL (Stop 2) 1.06 2.1 µA VDD = 3 V, TA = 25 °C 100
Supply current in Standby mode, RTC disabled, no independent watchdog IDD_ALL (Standby) 8836 30758 nA VDD = 3.6 V, TA = 125 °C 104
Backup domain supply current, RTC disabled IDD_VBAT (VBAT) 5 12.5 nA VBAT = 3 V, TA = 25 °C 107
Wake up time from Stop 2 mode to Run mode in Flash (Range 1) tWUSTOP2 8.02 9.24 µs Wakeup clock MSI = 48 MHz 113
Wakeup time from Shutdown mode to Run mode (Range 1) tWUSHDN 261.5 315.7 µs Wakeup clock MSI = 4 MHz 113

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: STM32L431KBU3
  • Footprint: Package_DFN_QFN:UFQFPN-32-1EP_5x5mm_P0.5mm_EP3.5x3.5mm
  • 3D model: UFQFPN-32(5x5), generated on the KiCad land (body 5 x 5 mm, terminals on the pads, 0.55 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: stm32l431kbu3-etched.step / stm32l431kbu3-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm32l431kbu3.step / stm32l431kbu3.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (208 pp, sha256 71963de3cb899f8f, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF