component
STM32L152VDT6
Public Made by Adomby adom
STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-100(14x14). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownSTM32L152VDT6
STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · LQFP-100(14x14)
STM32L152VDT6 from STMicroelectronics, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PE2 | bidirectional | 5 V tolerant (FT) I/O with default function PE2; alternate functions TIM3_ETR, LCD_SEG38, TRACECLK and FSMC_A23. |
| 2 | PE3 | bidirectional | 5 V tolerant (FT) I/O with default function PE3; alternate functions TIM3_CH1, LCD_SEG39, TRACED0 and FSMC_A19. |
| 3 | PE4 | bidirectional | 5 V tolerant (FT) I/O with default function PE4; alternate functions TIM3_CH2, TRACED1 and FSMC_A20. |
| 4 | PE5 | bidirectional | 5 V tolerant (FT) I/O with default function PE5; alternate functions TIM9_CH1, TRACED2 and FSMC_A21. |
| 5 | PE6-WKUP3 | bidirectional | 5 V tolerant (FT) I/O with default function PE6; alternate functions TIM9_CH2 and TRACED3, additional function WKUP3 / RTC_TAMP3. |
| 6 | VLCD | power_in | LCD power supply pin (S type); on STM32L152xD devices it is used as the LCD supply, while on STM32L151xD it must be connected to VDD. |
| 7 | PC13-WKUP2 | bidirectional | 5 V tolerant (FT) I/O with default function PC13; additional functions WKUP2, RTC_TAMP1, RTC_TS and RTC_OUT. |
| 8 | PC14-OSC32_IN | bidirectional | Standard 3.3 V (TC) I/O with default function PC14; it is configured as OSC32_IN only when the LSE oscillator is on (LSEON), otherwise it is a GPIO. |
| 9 | PC15-OSC32_OUT | bidirectional | Standard 3.3 V (TC) I/O with default function PC15; it is configured as OSC32_OUT only when the LSE oscillator is on (LSEON), otherwise it is a GPIO. |
| 10 | VSS_5 | power_in | Ground supply pin (S type); all voltages are referenced to VSS. |
| 11 | VDD_5 | power_in | Power supply pin (S type); all voltages are referenced to VSS. |
| 12 | PH0-OSC_IN | bidirectional | Standard 3.3 V (TC) I/O with default function PH0; it is configured as OSC_IN only when the HSE oscillator is on (HSEON), otherwise it is a GPIO. |
| 13 | PH1-OSC_OUT | bidirectional | Standard 3.3 V (TC) I/O with default function PH1; it is configured as OSC_OUT only when the HSE oscillator is on (HSEON), otherwise it is a GPIO. |
| 14 | NRST | bidirectional | Bidirectional reset pin with an embedded weak pull-up resistor. |
| 15 | PC0 | bidirectional | 5 V tolerant (FT) I/O with default function PC0; alternate function LCD_SEG18 and additional functions ADC_IN10 and COMP1_INP. |
| 16 | PC1 | bidirectional | 5 V tolerant (FT) I/O with default function PC1; alternate function LCD_SEG19 and additional functions ADC_IN11, COMP1_INP and OPAMP3_VINP. |
| 17 | PC2 | bidirectional | 5 V tolerant (FT) I/O with default function PC2; alternate function LCD_SEG20 and additional functions ADC_IN12, COMP1_INP and OPAMP3_VINM. |
| 18 | PC3 | bidirectional | Standard 3.3 V (TC) I/O with default function PC3; alternate function LCD_SEG21 and additional functions ADC_IN13, COMP1_INP and OPAMP3_VOUT. |
| 19 | VSSA | power_in | Analog ground pin (S type) for the ADC, DAC and analog peripherals; all voltages are referenced to VSS. |
| 20 | VREF- | power_in | Negative reference voltage pin (S type); VSSA or VREF- must be tied to ground. |
| 21 | VREF+ | power_in | Positive ADC reference voltage pin (S type) with a minimum of 1.8 V when used; it can be grounded if neither the ADC nor the DAC is used. |
| 22 | VDDA | power_in | Analog supply pin (S type); the ADC specifies VDDA from 1.8 V to 3.6 V. |
| 23 | PA0-WKUP1 | bidirectional | 5 V tolerant (FT) I/O with default function PA0; alternate functions TIM2_CH1_ETR, TIM5_CH1 and USART2_CTS, additional functions WKUP1, RTC_TAMP2, ADC_IN0 and COMP1_INP. |
| 24 | PA1 | bidirectional | 5 V tolerant (FT) I/O with default function PA1; alternate functions TIM2_CH2, TIM5_CH2, USART2_RTS and LCD_SEG0, additional functions ADC_IN1, COMP1_INP and OPAMP1_VINP. |
| 25 | PA2 | bidirectional | 5 V tolerant (FT) I/O with default function PA2; alternate functions TIM2_CH3, TIM5_CH3, TIM9_CH1, USART2_TX and LCD_SEG1, additional functions ADC_IN2, COMP1_INP and OPAMP1_VINM. |
| 26 | PA3 | bidirectional | Standard 3.3 V (TC) I/O with default function PA3; alternate functions TIM2_CH4, TIM5_CH4, TIM9_CH2, USART2_RX and LCD_SEG2, additional functions ADC_IN3, COMP1_INP and OPAMP1_VOUT. |
| 27 | VSS_4 | power_in | Ground supply pin (S type); all voltages are referenced to VSS. |
| 28 | VDD_4 | power_in | Power supply pin (S type); all voltages are referenced to VSS. |
| 29 | PA4 | bidirectional | Standard 3.3 V (TC) I/O with default function PA4; alternate functions SPI1_NSS, SPI3_NSS, I2S3_WS and USART2_CK, additional functions ADC_IN4, DAC_OUT1 and COMP1_INP. |
| 30 | PA5 | bidirectional | Standard 3.3 V (TC) I/O with default function PA5; alternate functions TIM2_CH1_ETR and SPI1_SCK, additional functions ADC_IN5, DAC_OUT2 and COMP1_INP. |
| 31 | PA6 | bidirectional | 5 V tolerant (FT) I/O with default function PA6; alternate functions TIM3_CH1, TIM10_CH1, SPI1_MISO and LCD_SEG3, additional functions ADC_IN6, COMP1_INP and OPAMP2_VINP. |
| 32 | PA7 | bidirectional | 5 V tolerant (FT) I/O with default function PA7; alternate functions TIM3_CH2, TIM11_CH1, SPI1_MOSI and LCD_SEG4, additional functions ADC_IN7, COMP1_INP and OPAMP2_VINM. |
| 33 | PC4 | bidirectional | 5 V tolerant (FT) I/O with default function PC4; alternate function LCD_SEG22, additional functions ADC_IN14 and COMP1_INP. |
| 34 | PC5 | bidirectional | 5 V tolerant (FT) I/O with default function PC5; alternate function LCD_SEG23, additional functions ADC_IN15 and COMP1_INP. |
| 35 | PB0 | bidirectional | Standard 3.3 V (TC) I/O with default function PB0; alternate functions TIM3_CH3 and LCD_SEG5, additional functions ADC_IN8, COMP1_INP, OPAMP2_VOUT and VREF_OUT. |
| 36 | PB1 | bidirectional | 5 V tolerant (FT) I/O with default function PB1; alternate functions TIM3_CH4 and LCD_SEG6, additional functions ADC_IN9, COMP1_INP and VREF_OUT. |
| 37 | PB2/BOOT1 | bidirectional | 5 V tolerant (FT) I/O with default function PB2/BOOT1; BOOT1 function, additional function ADC_IN0b. |
| 38 | PE7 | bidirectional | Standard 3.3 V (TC) I/O with default function PE7; alternate function FSMC_D4, additional functions ADC_IN22 and COMP1_INP. |
| 39 | PE8 | bidirectional | Standard 3.3 V (TC) I/O with default function PE8; alternate function FSMC_D5, additional functions ADC_IN23 and COMP1_INP. |
| 40 | PE9 | bidirectional | Standard 3.3 V (TC) I/O with default function PE9; alternate functions TIM2_CH1_ETR and FSMC_D6, additional functions ADC_IN24 and COMP1_INP. |
| 41 | PE10 | bidirectional | Standard 3.3 V (TC) I/O with default function PE10; alternate functions TIM2_CH2 and FSMC_D7, additional functions ADC_IN25 and COMP1_INP. |
| 42 | PE11 | bidirectional | 5 V tolerant (FT) I/O with default function PE11; alternate functions TIM2_CH3 and FSMC_D8. |
| 43 | PE12 | bidirectional | 5 V tolerant (FT) I/O with default function PE12; alternate functions TIM2_CH4, SPI1_NSS and FSMC_D9. |
| 44 | PE13 | bidirectional | 5 V tolerant (FT) I/O with default function PE13; alternate functions SPI1_SCK and FSMC_D10. |
| 45 | PE14 | bidirectional | 5 V tolerant (FT) I/O with default function PE14; alternate functions SPI1_MISO and FSMC_D11. |
| 46 | PE15 | bidirectional | 5 V tolerant (FT) I/O with default function PE15; alternate functions SPI1_MOSI and FSMC_D12. |
| 47 | PB10 | bidirectional | 5 V tolerant (FT) I/O with default function PB10; alternate functions TIM2_CH3, I2C2_SCL, USART3_TX and LCD_SEG10. |
| 48 | PB11 | bidirectional | 5 V tolerant (FT) I/O with default function PB11; alternate functions TIM2_CH4, I2C2_SDA, USART3_RX and LCD_SEG11. |
| 49 | VSS_1 | power_in | Ground supply pin (S type); all voltages are referenced to VSS. |
| 50 | VDD_1 | power_in | Power supply pin (S type); all voltages are referenced to VSS. |
| 51 | PB12 | bidirectional | 5 V tolerant (FT) I/O with default function PB12; alternate functions TIM10_CH1, I2C2_SMBA, SPI2_NSS, I2S2_WS, USART3_CK and LCD_SEG12, additional functions ADC_IN18 and COMP1_INP. |
| 52 | PB13 | bidirectional | 5 V tolerant (FT) I/O with default function PB13; alternate functions TIM9_CH1, SPI2_SCK, I2S2_CK, USART3_CTS and LCD_SEG13, additional functions ADC_IN19 and COMP1_INP. |
| 53 | PB14 | bidirectional | 5 V tolerant (FT) I/O with default function PB14; alternate functions TIM9_CH2, SPI2_MISO, USART3_RTS and LCD_SEG14, additional functions ADC_IN20 and COMP1_INP. |
| 54 | PB15 | bidirectional | 5 V tolerant (FT) I/O with default function PB15; alternate functions TIM11_CH1, SPI2_MOSI, I2S2_SD and LCD_SEG15, additional functions ADC_IN21, COMP1_INP and RTC_REFIN. |
| 55 | PD8 | bidirectional | 5 V tolerant (FT) I/O with default function PD8; alternate functions USART3_TX, LCD_SEG28 and FSMC_D13. |
| 56 | PD9 | bidirectional | 5 V tolerant (FT) I/O with default function PD9; alternate functions USART3_RX, LCD_SEG29 and FSMC_D14. |
| 57 | PD10 | bidirectional | 5 V tolerant (FT) I/O with default function PD10; alternate functions USART3_CK, LCD_SEG30 and FSMC_D15. |
| 58 | PD11 | bidirectional | 5 V tolerant (FT) I/O with default function PD11; alternate functions USART3_CTS, LCD_SEG31 and FSMC_A16. |
| 59 | PD12 | bidirectional | 5 V tolerant (FT) I/O with default function PD12; alternate functions TIM4_CH1, USART3_RTS, LCD_SEG32 and FSMC_A17. |
| 60 | PD13 | bidirectional | 5 V tolerant (FT) I/O with default function PD13; alternate functions TIM4_CH2, LCD_SEG33 and FSMC_A18. |
| 61 | PD14 | bidirectional | 5 V tolerant (FT) I/O with default function PD14; alternate functions TIM4_CH3, LCD_SEG34 and FSMC_D0. |
| 62 | PD15 | bidirectional | 5 V tolerant (FT) I/O with default function PD15; alternate functions TIM4_CH4, LCD_SEG35 and FSMC_D1. |
| 63 | PC6 | bidirectional | 5 V tolerant (FT) I/O with default function PC6; alternate functions TIM3_CH1, I2S2_MCK, LCD_SEG24 and SDIO_D6. |
| 64 | PC7 | bidirectional | 5 V tolerant (FT) I/O with default function PC7; alternate functions TIM3_CH2, I2S3_MCK, LCD_SEG25 and SDIO_D7. |
| 65 | PC8 | bidirectional | 5 V tolerant (FT) I/O with default function PC8; alternate functions TIM3_CH3, LCD_SEG26 and SDIO_D0. |
| 66 | PC9 | bidirectional | 5 V tolerant (FT) I/O with default function PC9; alternate functions TIM3_CH4, LCD_SEG27 and SDIO_D1. |
| 67 | PA8 | bidirectional | 5 V tolerant (FT) I/O with default function PA8; alternate functions USART1_CK, MCO and LCD_COM0. |
| 68 | PA9 | bidirectional | 5 V tolerant (FT) I/O with default function PA9; alternate functions USART1_TX and LCD_COM1. |
| 69 | PA10 | bidirectional | 5 V tolerant (FT) I/O with default function PA10; alternate functions USART1_RX and LCD_COM2. |
| 70 | PA11 | bidirectional | 5 V tolerant (FT) I/O with default function PA11; alternate functions USART1_CTS and SPI1_MISO, additional function USB_DM. |
| 71 | PA12 | bidirectional | 5 V tolerant (FT) I/O with default function PA12; alternate functions USART1_RTS and SPI1_MOSI, additional function USB_DP. |
| 72 | PA13 | bidirectional | 5 V tolerant (FT) I/O with default function JTMS-SWDIO (serial wire debug data). |
| 73 | PH2 | bidirectional | 5 V tolerant (FT) I/O with default function PH2; alternate function FSMC_A22. |
| 74 | VSS_2 | power_in | Ground supply pin (S type); all voltages are referenced to VSS. |
| 75 | VDD_2 | power_in | Power supply pin (S type); all voltages are referenced to VSS. |
| 76 | PA14 | bidirectional | 5 V tolerant (FT) I/O with default function JTCK-SWCLK (serial wire debug clock). |
| 77 | PA15 | bidirectional | 5 V tolerant (FT) I/O with default function JTDI; alternate functions TIM2_CH1_ETR, SPI1_NSS, SPI3_NSS, I2S3_WS and LCD_SEG17. |
| 78 | PC10 | bidirectional | 5 V tolerant (FT) I/O with default function PC10; alternate functions SPI3_SCK, I2S3_CK, USART3_TX, UART4_TX, LCD_SEG28/LCD_SEG40, LCD_COM4 and SDIO_D2. |
| 79 | PC11 | bidirectional | 5 V tolerant (FT) I/O with default function PC11; alternate functions SPI3_MISO, USART3_RX, UART4_RX, LCD_SEG29/LCD_SEG41, LCD_COM5 and SDIO_D3. |
| 80 | PC12 | bidirectional | 5 V tolerant (FT) I/O with default function PC12; alternate functions SPI3_MOSI, I2S3_SD, USART3_CK, UART5_TX, LCD_SEG30/LCD_SEG42, LCD_COM6 and SDIO_CK. |
| 81 | PD0 | bidirectional | 5 V tolerant (FT) I/O with default function PD0; alternate functions TIM9_CH1, SPI2_NSS, I2S2_WS and FSMC_D2. |
| 82 | PD1 | bidirectional | 5 V tolerant (FT) I/O with default function PD1; alternate functions SPI2_SCK, I2S2_CK and FSMC_D3. |
| 83 | PD2 | bidirectional | 5 V tolerant (FT) I/O with default function PD2; alternate functions TIM3_ETR, UART5_RX, LCD_SEG31/LCD_SEG43, LCD_COM7 and SDIO_CMD. |
| 84 | PD3 | bidirectional | 5 V tolerant (FT) I/O with default function PD3; alternate functions SPI2_MISO, USART2_CTS and FSMC_CLK. |
| 85 | PD4 | bidirectional | 5 V tolerant (FT) I/O with default function PD4; alternate functions SPI2_MOSI, I2S2_SD, USART2_RTS and FSMC_NOE. |
| 86 | PD5 | bidirectional | 5 V tolerant (FT) I/O with default function PD5; alternate functions USART2_TX and FSMC_NWE. |
| 87 | PD6 | bidirectional | 5 V tolerant (FT) I/O with default function PD6; alternate functions USART2_RX and FSMC_NWAIT. |
| 88 | PD7 | bidirectional | 5 V tolerant (FT) I/O with default function PD7; alternate functions TIM9_CH2, USART2_CK and FSMC_NE1. |
| 89 | PB3 | bidirectional | 5 V tolerant (FT) I/O with default function JTDO; alternate functions TIM2_CH2, SPI1_SCK, SPI3_SCK, I2S3_CK and LCD_SEG7, additional function COMP2_INM. |
| 90 | PB4 | bidirectional | 5 V tolerant (FT) I/O with default function NJTRST; alternate functions TIM3_CH1, SPI1_MISO, SPI3_MISO and LCD_SEG8, additional function COMP2_INP. |
| 91 | PB5 | bidirectional | 5 V tolerant (FT) I/O with default function PB5; alternate functions TIM3_CH2, I2C1_SMBA, SPI1_MOSI, SPI3_MOSI, I2S3_SD and LCD_SEG9, additional function COMP2_INP. |
| 92 | PB6 | bidirectional | 5 V tolerant (FT) I/O with default function PB6; alternate functions TIM4_CH1, I2C1_SCL and USART1_TX, additional function COMP2_INP. |
| 93 | PB7 | bidirectional | 5 V tolerant (FT) I/O with default function PB7; alternate functions TIM4_CH2, I2C1_SDA, USART1_RX and FSMC_NADV, additional functions COMP2_INP and PVD_IN. |
| 94 | BOOT0 | input | Dedicated BOOT0 boot-mode input pin. |
| 95 | PB8 | bidirectional | 5 V tolerant (FT) I/O with default function PB8; alternate functions TIM4_CH3, TIM10_CH1, I2C1_SCL, LCD_SEG16 and SDIO_D4. |
| 96 | PB9 | bidirectional | 5 V tolerant (FT) I/O with default function PB9; alternate functions TIM4_CH4, TIM11_CH1, I2C1_SDA, LCD_COM3 and SDIO_D5. |
| 97 | PE0 | bidirectional | 5 V tolerant (FT) I/O with default function PE0; alternate functions TIM4_ETR, TIM10_CH1, LCD_SEG36 and FSMC_NBL0. |
| 98 | PE1 | bidirectional | 5 V tolerant (FT) I/O with default function PE1; alternate functions TIM11_CH1, LCD_SEG37 and FSMC_NBL1. |
| 99 | VSS_3 | power_in | Ground supply pin (S type); all voltages are referenced to VSS. |
| 100 | VDD_3 | power_in | Power supply pin (S type); all voltages are referenced to VSS. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LQFP-100(14x14) |
| Category | Embedded Processors & Controllers |
| Pins | 100 |
CAD (KiCad official)
- Symbol:
STM32L152VDT6 - Footprint:
Package_QFP:LQFP-100_14x14mm_P0.5mm - 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)
- 3D model files:
stm32l152vdt6-etched.step/stm32l152vdt6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32l152vdt6.step/stm32l152vdt6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (155 pp, sha256
92c7b8f244edf6a6, retrieved 2026-10-08, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).