main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs stm32l151rct6: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers stm32l151rct6: viewers · Ray
package.json stm32l151rct6: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json stm32l151rct6: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/stm32l151rct6 · Ray
stm32l151rct6-etched.fit.json stm32l151rct6: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
stm32l151rct6-etched.glb stm32l151rct6: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
stm32l151rct6-etched.step stm32l151rct6: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
stm32l151rct6.glb Publish 0.1.0 · Ray
stm32l151rct6.kicad_mod Publish 0.1.0 · Ray
stm32l151rct6.kicad_sym Publish 0.1.0 · Ray
stm32l151rct6.lbr Publish 0.1.0 · Ray
stm32l151rct6.step Publish 0.1.0 · Ray

STM32L151RCT6

STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · LQFP-64(10x10)

STM32L151RCT6 from STMicroelectronics, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VLCD power_in LCD voltage supply; for STM32L151xC (no LCD controller) datasheet footnote 3 requires this pin be connected to VDD; max 3.6 V.
2 PC13-WKUP2 bidirectional 5 V tolerant GPIO PC13; additional functions: WKUP2 wakeup from Standby, RTC_TAMP1, RTC_TS, RTC_OUT; floating input after reset.
3 PC14-OSC32_IN bidirectional Standard 3.3 V GPIO PC14; shared with LSE 32.768 kHz oscillator input OSC32_IN when LSE is enabled (LSEON bit set); LSE has priority over GPIO.
4 PC15-OSC32_OUT bidirectional Standard 3.3 V GPIO PC15; shared with LSE 32.768 kHz oscillator output OSC32_OUT when LSE is enabled; LSE has priority over GPIO.
5 PH0-OSC_IN bidirectional Standard 3.3 V GPIO PH0; shared with HSE oscillator input OSC_IN (1-24 MHz) when HSE is enabled (HSEON bit set); HSE has priority over GPIO.
6 PH1-OSC_OUT bidirectional Standard 3.3 V GPIO PH1; shared with HSE oscillator output OSC_OUT when HSE is enabled; HSE has priority over GPIO.
7 NRST bidirectional Active-low reset; bidirectional with embedded 25-65 kΩ pull-up; filters pulses below 50 ns; VIL max = 0.3 VDD, VIH min = 0.39 VDD + 0.59 V; VOL max = 0.4 V at IOL = 2 mA.
8 PC0 bidirectional 5 V tolerant GPIO PC0; alternate: LCD_SEG18; additional: ADC_IN10, COMP1_INP; floating input after reset.
9 PC1 bidirectional 5 V tolerant GPIO PC1; alternate: LCD_SEG19; additional: ADC_IN11, COMP1_INP; floating input after reset.
10 PC2 bidirectional 5 V tolerant GPIO PC2; alternate: LCD_SEG20; additional: ADC_IN12, COMP1_INP; floating input after reset.
11 PC3 bidirectional Standard 3.3 V GPIO PC3; alternate: LCD_SEG21; additional: ADC_IN13, COMP1_INP; floating input after reset.
12 VSSA power_in Analog ground reference for ADC, DAC, comparators, and PLL; must be connected to VSS.
13 VDDA power_in Analog supply voltage 1.65-3.6 V (minimum 1.8 V when ADC or DAC is used); must be same voltage as VDD within 300 mV in operation.
14 PA0-WKUP1 bidirectional 5 V tolerant GPIO PA0; additional: WKUP1 wakeup from Standby, RTC_TAMP2, ADC_IN0, COMP1_INP; alternate: TIM2_CH1_ETR, TIM5_CH1, USART2_CTS.
15 PA1 bidirectional 5 V tolerant GPIO PA1; alternate: TIM2_CH2, TIM5_CH2, USART2_RTS, LCD_SEG0; additional: ADC_IN1, COMP1_INP, OPAMP1_VINP.
16 PA2 bidirectional 5 V tolerant GPIO PA2; alternate: TIM2_CH3, TIM5_CH3, TIM9_CH1, USART2_TX, LCD_SEG1; additional: ADC_IN2, COMP1_INP, OPAMP1_VINM.
17 PA3 bidirectional Standard 3.3 V GPIO PA3; alternate: TIM2_CH4, TIM5_CH4, TIM9_CH2, USART2_RX, LCD_SEG2; additional: ADC_IN3, COMP1_INP, OPAMP1_VOUT.
18 VSS_4 power_in Digital ground reference; must be connected to system ground; total sink current across all VSS pins ≤ 100 mA, per pin ≤ 70 mA.
19 VDD_4 power_in Main digital supply 1.65-3.6 V (BOR disabled) or 1.8-3.6 V (BOR enabled); source current per pin ≤ 70 mA, total across all VDD pins ≤ 100 mA.
20 PA4 bidirectional Standard 3.3 V GPIO PA4; alternate: SPI1_NSS, SPI3_NSS/I2S3_WS, USART2_CK; additional: ADC_IN4, DAC_OUT1, COMP1_INP.
21 PA5 bidirectional Standard 3.3 V GPIO PA5; alternate: TIM2_CH1_ETR, SPI1_SCK; additional: ADC_IN5, DAC_OUT2, COMP1_INP.
22 PA6 bidirectional 5 V tolerant GPIO PA6; alternate: TIM3_CH1, TIM10_CH1, SPI1_MISO, LCD_SEG3; additional: ADC_IN6, COMP1_INP, OPAMP2_VINP.
23 PA7 bidirectional 5 V tolerant GPIO PA7; alternate: TIM3_CH2, TIM11_CH1, SPI1_MOSI, LCD_SEG4; additional: ADC_IN7, COMP1_INP, OPAMP2_VINM.
24 PC4 bidirectional 5 V tolerant GPIO PC4; alternate: LCD_SEG22; additional: ADC_IN14, COMP1_INP; floating input after reset.
25 PC5 bidirectional 5 V tolerant GPIO PC5; alternate: LCD_SEG23; additional: ADC_IN15, COMP1_INP; floating input after reset.
26 PB0 bidirectional Standard 3.3 V GPIO PB0; alternate: TIM3_CH3, LCD_SEG5; additional: ADC_IN8, COMP1_INP, OPAMP2_VOUT, VLCDRAIL3, VREF_OUT.
27 PB1 bidirectional 5 V tolerant GPIO PB1; alternate: TIM3_CH4, LCD_SEG6; additional: ADC_IN9, COMP1_INP, VREF_OUT.
28 PB2 bidirectional 5 V tolerant GPIO PB2; sampled at reset as BOOT1 to determine boot memory source in combination with BOOT0; additional: VLCDRAIL1.
29 PB10 bidirectional 5 V tolerant GPIO PB10; alternate: TIM2_CH3, I2C2_SCL, USART3_TX, LCD_SEG10; floating input after reset.
30 PB11 bidirectional 5 V tolerant GPIO PB11; alternate: TIM2_CH4, I2C2_SDA, USART3_RX, LCD_SEG11; floating input after reset.
31 VSS_1 power_in Digital ground reference; must be connected to system ground; total sink current across all VSS pins ≤ 100 mA, per pin ≤ 70 mA.
32 VDD_1 power_in Main digital supply 1.65-3.6 V (BOR disabled) or 1.8-3.6 V (BOR enabled); source current per pin ≤ 70 mA, total across all VDD pins ≤ 100 mA.
33 PB12 bidirectional 5 V tolerant GPIO PB12; alternate: TIM10_CH1, I2C2_SMBA, SPI2_NSS/I2S2_WS, USART3_CK, LCD_SEG12; additional: ADC_IN18, VLCDRAIL2.
34 PB13 bidirectional 5 V tolerant GPIO PB13; alternate: TIM9_CH1, SPI2_SCK/I2S2_CK, USART3_CTS, LCD_SEG13; additional: ADC_IN19, COMP1_INP.
35 PB14 bidirectional 5 V tolerant GPIO PB14; alternate: TIM9_CH2, SPI2_MISO, USART3_RTS, LCD_SEG14; additional: ADC_IN20, COMP1_INP.
36 PB15 bidirectional 5 V tolerant GPIO PB15; alternate: TIM11_CH1, SPI2_MOSI/I2S2_SD, LCD_SEG15; additional: ADC_IN21, COMP1_INP, RTC_REFIN.
37 PC6 bidirectional 5 V tolerant GPIO PC6; alternate: TIM3_CH1, I2S2_MCK, LCD_SEG24; floating input after reset.
38 PC7 bidirectional 5 V tolerant GPIO PC7; alternate: TIM3_CH2, I2S3_MCK, LCD_SEG25; floating input after reset.
39 PC8 bidirectional 5 V tolerant GPIO PC8; alternate: TIM3_CH3, LCD_SEG26; floating input after reset.
40 PC9 bidirectional 5 V tolerant GPIO PC9; alternate: TIM3_CH4, LCD_SEG27; floating input after reset.
41 PA8 bidirectional 5 V tolerant GPIO PA8; alternate: USART1_CK, MCO (microcontroller clock output), LCD_COM0; floating input after reset.
42 PA9 bidirectional 5 V tolerant GPIO PA9; alternate: USART1_TX, LCD_COM1; floating input after reset.
43 PA10 bidirectional 5 V tolerant GPIO PA10; alternate: USART1_RX, LCD_COM2; floating input after reset.
44 PA11 bidirectional 5 V tolerant GPIO PA11; alternate: USART1_CTS, SPI1_MISO; additional: USB_DM (USB 2.0 full-speed 12 Mbit/s D− line); USB requires VDD ≥ 3.0 V.
45 PA12 bidirectional 5 V tolerant GPIO PA12; alternate: USART1_RTS, SPI1_MOSI; additional: USB_DP (USB 2.0 full-speed 12 Mbit/s D+ line); USB requires VDD ≥ 3.0 V.
46 PA13 bidirectional 5 V tolerant GPIO PA13; default function after reset is JTMS-SWDIO (JTAG/SWD data I/O shared with TMS); remappable to GPIO via AFIO.
47 VSS_2 power_in Digital ground reference; must be connected to system ground; total sink current across all VSS pins ≤ 100 mA, per pin ≤ 70 mA.
48 VDD_2 power_in Main digital supply 1.65-3.6 V (BOR disabled) or 1.8-3.6 V (BOR enabled); source current per pin ≤ 70 mA, total across all VDD pins ≤ 100 mA.
49 PA14 bidirectional 5 V tolerant GPIO PA14; default function after reset is JTCK-SWCLK (JTAG TCK / SWD clock shared with TCK); remappable to GPIO via AFIO.
50 PA15 bidirectional 5 V tolerant GPIO PA15; default function after reset is JTDI (JTAG data input); alternate: TIM2_CH1_ETR, SPI1_NSS, SPI3_NSS/I2S3_WS, LCD_SEG17.
51 PC10 bidirectional 5 V tolerant GPIO PC10; alternate: SPI3_SCK/I2S3_CK, USART3_TX, LCD_COM4/SEG28/SEG40; floating input after reset.
52 PC11 bidirectional 5 V tolerant GPIO PC11; alternate: SPI3_MISO, USART3_RX, LCD_COM5/SEG29/SEG41; floating input after reset.
53 PC12 bidirectional 5 V tolerant GPIO PC12; alternate: SPI3_MOSI/I2S3_SD, USART3_CK, LCD_COM6/SEG30/SEG42; floating input after reset.
54 PD2 bidirectional 5 V tolerant GPIO PD2; alternate: TIM3_ETR, LCD_COM7/SEG31/SEG43; floating input after reset.
55 PB3 bidirectional 5 V tolerant GPIO PB3; default function after reset is JTDO (JTAG data output); alternate: TIM2_CH2, SPI1_SCK, SPI3_SCK/I2S3_CK, LCD_SEG7; additional: COMP2_INM.
56 PB4 bidirectional 5 V tolerant GPIO PB4; default function after reset is NJTRST (JTAG reset); alternate: TIM3_CH1, SPI1_MISO, SPI3_MISO, LCD_SEG8; additional: COMP2_INP.
57 PB5 bidirectional 5 V tolerant GPIO PB5; alternate: TIM3_CH2, I2C1_SMBA, SPI1_MOSI, SPI3_MOSI/I2S3_SD, LCD_SEG9; additional: COMP2_INP.
58 PB6 bidirectional 5 V tolerant GPIO PB6; alternate: TIM4_CH1, I2C1_SCL, USART1_TX; additional: COMP2_INP.
59 PB7 bidirectional 5 V tolerant GPIO PB7; alternate: TIM4_CH2, I2C1_SDA, USART1_RX; additional: COMP2_INP, PVD_IN.
60 BOOT0 input Dedicated boot-mode selection input; sampled at reset to select Flash, System memory, or embedded RAM boot; input range 0-5.5 V; VIL max = 0.14 VDD, VIH min = 0.15 VDD + 0.56 V.
61 PB8 bidirectional 5 V tolerant GPIO PB8; alternate: TIM4_CH3, TIM10_CH1, I2C1_SCL, LCD_SEG16; floating input after reset.
62 PB9 bidirectional 5 V tolerant GPIO PB9; alternate: TIM4_CH4, TIM11_CH1, I2C1_SDA, LCD_COM3; floating input after reset.
63 VSS_3 power_in Digital ground reference; must be connected to system ground; total sink current across all VSS pins ≤ 100 mA, per pin ≤ 70 mA.
64 VDD_3 power_in Main digital supply 1.65-3.6 V (BOR disabled) or 1.8-3.6 V (BOR enabled); source current per pin ≤ 70 mA, total across all VDD pins ≤ 100 mA.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package LQFP-64(10x10)
Category Embedded Processors & Controllers
Pins 64

CAD (KiCad official)

  • Symbol: STM32L151RCT6
  • Footprint: Package_QFP:LQFP-64_10x10mm_P0.5mm
  • 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
  • 3D model files: stm32l151rct6-etched.step / stm32l151rct6-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm32l151rct6.step / stm32l151rct6.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (136 pp, sha256 5e6d5674cd06c108, retrieved 2026-09-26, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF