component
STM32L151RCT6
Public Made by Adomby adom
STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-64(10x10). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.
← Commit history
stm32l151rct6: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
2 files changed
+95−15
package.json+53−13@@ -103,7 +103,7 @@ "number": "7", "name": "NRST", "type": "bidirectional",- "description": "Active-low reset; bidirectional with embedded 25-65 k\u03a9 pull-up; filters pulses below 50 ns; VIL max = 0.3 VDD, VIH min = 0.39 VDD + 0.59 V; VOL max = 0.4 V at IOL = 2 mA."+ "description": "Active-low reset; bidirectional with embedded 25-65 kΩ pull-up; filters pulses below 50 ns; VIL max = 0.3 VDD, VIH min = 0.39 VDD + 0.59 V; VOL max = 0.4 V at IOL = 2 mA." }, { "number": "8",@@ -169,13 +169,13 @@ "number": "18", "name": "VSS_4", "type": "power_in",- "description": "Digital ground reference; must be connected to system ground; total sink current across all VSS pins \u2264 100 mA, per pin \u2264 70 mA."+ "description": "Digital ground reference; must be connected to system ground; total sink current across all VSS pins ≤ 100 mA, per pin ≤ 70 mA." }, { "number": "19", "name": "VDD_4", "type": "power_in",- "description": "Main digital supply 1.65-3.6 V (BOR disabled) or 1.8-3.6 V (BOR enabled); source current per pin \u2264 70 mA, total across all VDD pins \u2264 100 mA."+ "description": "Main digital supply 1.65-3.6 V (BOR disabled) or 1.8-3.6 V (BOR enabled); source current per pin ≤ 70 mA, total across all VDD pins ≤ 100 mA." }, { "number": "20",@@ -247,13 +247,13 @@ "number": "31", "name": "VSS_1", "type": "power_in",- "description": "Digital ground reference; must be connected to system ground; total sink current across all VSS pins \u2264 100 mA, per pin \u2264 70 mA."+ "description": "Digital ground reference; must be connected to system ground; total sink current across all VSS pins ≤ 100 mA, per pin ≤ 70 mA." }, { "number": "32", "name": "VDD_1", "type": "power_in",- "description": "Main digital supply 1.65-3.6 V (BOR disabled) or 1.8-3.6 V (BOR enabled); source current per pin \u2264 70 mA, total across all VDD pins \u2264 100 mA."+ "description": "Main digital supply 1.65-3.6 V (BOR disabled) or 1.8-3.6 V (BOR enabled); source current per pin ≤ 70 mA, total across all VDD pins ≤ 100 mA." }, { "number": "33",@@ -325,13 +325,13 @@ "number": "44", "name": "PA11", "type": "bidirectional",- "description": "5 V tolerant GPIO PA11; alternate: USART1_CTS, SPI1_MISO; additional: USB_DM (USB 2.0 full-speed 12 Mbit/s D\u2212 line); USB requires VDD \u2265 3.0 V."+ "description": "5 V tolerant GPIO PA11; alternate: USART1_CTS, SPI1_MISO; additional: USB_DM (USB 2.0 full-speed 12 Mbit/s D− line); USB requires VDD ≥ 3.0 V." }, { "number": "45", "name": "PA12", "type": "bidirectional",- "description": "5 V tolerant GPIO PA12; alternate: USART1_RTS, SPI1_MOSI; additional: USB_DP (USB 2.0 full-speed 12 Mbit/s D+ line); USB requires VDD \u2265 3.0 V."+ "description": "5 V tolerant GPIO PA12; alternate: USART1_RTS, SPI1_MOSI; additional: USB_DP (USB 2.0 full-speed 12 Mbit/s D+ line); USB requires VDD ≥ 3.0 V." }, { "number": "46",@@ -343,13 +343,13 @@ "number": "47", "name": "VSS_2", "type": "power_in",- "description": "Digital ground reference; must be connected to system ground; total sink current across all VSS pins \u2264 100 mA, per pin \u2264 70 mA."+ "description": "Digital ground reference; must be connected to system ground; total sink current across all VSS pins ≤ 100 mA, per pin ≤ 70 mA." }, { "number": "48", "name": "VDD_2", "type": "power_in",- "description": "Main digital supply 1.65-3.6 V (BOR disabled) or 1.8-3.6 V (BOR enabled); source current per pin \u2264 70 mA, total across all VDD pins \u2264 100 mA."+ "description": "Main digital supply 1.65-3.6 V (BOR disabled) or 1.8-3.6 V (BOR enabled); source current per pin ≤ 70 mA, total across all VDD pins ≤ 100 mA." }, { "number": "49",@@ -439,13 +439,13 @@ "number": "63", "name": "VSS_3", "type": "power_in",- "description": "Digital ground reference; must be connected to system ground; total sink current across all VSS pins \u2264 100 mA, per pin \u2264 70 mA."+ "description": "Digital ground reference; must be connected to system ground; total sink current across all VSS pins ≤ 100 mA, per pin ≤ 70 mA." }, { "number": "64", "name": "VDD_3", "type": "power_in",- "description": "Main digital supply 1.65-3.6 V (BOR disabled) or 1.8-3.6 V (BOR enabled); source current per pin \u2264 70 mA, total across all VDD pins \u2264 100 mA."+ "description": "Main digital supply 1.65-3.6 V (BOR disabled) or 1.8-3.6 V (BOR enabled); source current per pin ≤ 70 mA, total across all VDD pins ≤ 100 mA." } ], "provenance": {@@ -482,6 +482,46 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "stm32l151rct6.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 12.0,+ 12.0,+ 1.5+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "b0c827bc5c05552175d28affe44a5bd2ab45c9c36efff6ff07a74cc449b13db4",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "stm32l151rct6-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 12.0,+ 12.0,+ 1.5+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "eb75be66f7d1792c4623a060d3dc0fdac460108a70978f071be06847c352ae12",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }-}+}
page.json+42−2@@ -467,7 +467,47 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "stm32l151rct6.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 12.0,+ 12.0,+ 1.5+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "b0c827bc5c05552175d28affe44a5bd2ab45c9c36efff6ff07a74cc449b13db4",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "stm32l151rct6-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 12.0,+ 12.0,+ 1.5+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "eb75be66f7d1792c4623a060d3dc0fdac460108a70978f071be06847c352ae12",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }, "metadata": { "specs": {@@ -514,4 +554,4 @@ "visibility": { "public": true }-}+}