component
STM32L151RBT6ATR
Public Made by Adomby adom
STMicroelectronics ST Microelectronics, LQFP-64(10x10). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownSTM32L151RBT6ATR
STMicroelectronics · ST Microelectronics · LQFP-64(10x10)
STM32L151RBT6ATR from STMicroelectronics, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VLCD | power_in | LCD power supply pin; on STM32L151xxxxA devices the datasheet says this pin should be connected to VDD. |
| 2 | PC13 | bidirectional | 5 V tolerant GPIO (FT) with RTC_TAMP1, RTC_TS, RTC_OUT and WKUP2 functions. |
| 3 | PC14-OSC32_IN | bidirectional | Standard 3.3 V I/O (TC) that serves as OSC32_IN only when the LSE oscillator is on, otherwise usable as PC14. |
| 4 | PC15-OSC32_OUT | bidirectional | Standard 3.3 V I/O (TC) that serves as OSC32_OUT only when the LSE oscillator is on, otherwise usable as PC15. |
| 5 | PH0-OSC_IN | bidirectional | Standard 3.3 V I/O (TC) that serves as OSC_IN only when the HSE oscillator is on, otherwise usable as PH0. |
| 6 | PH1-OSC_OUT | bidirectional | Standard 3.3 V I/O (TC) that serves as OSC_OUT only when the HSE oscillator is on, otherwise usable as PH1. |
| 7 | NRST | bidirectional | Bidirectional reset pin with embedded weak pull-up resistor. |
| 8 | PC0 | bidirectional | 5 V tolerant I/O (FT) with LCD_SEG18, ADC_IN10 and COMP1_INP functions. |
| 9 | PC1 | bidirectional | 5 V tolerant I/O (FT) with LCD_SEG19, ADC_IN11 and COMP1_INP functions. |
| 10 | PC2 | bidirectional | 5 V tolerant I/O (FT) with LCD_SEG20, ADC_IN12 and COMP1_INP functions. |
| 11 | PC3 | bidirectional | Standard 3.3 V I/O (TC) with LCD_SEG21, ADC_IN13 and COMP1_INP functions. |
| 12 | VSSA | power_in | Analog ground pin. |
| 13 | VDDA | power_in | Analog supply pin; the datasheet gives VDDA from 1.8 V to 3.6 V. |
| 14 | PA0-WKUP1 | bidirectional | 5 V tolerant I/O (FT) with USART2_CTS, TIM2_CH1_ETR, WKUP1, ADC_IN0, COMP1_INP and RTC_TAMP2 functions. |
| 15 | PA1 | bidirectional | 5 V tolerant I/O (FT) with USART2_RTS, TIM2_CH2, LCD_SEG0, ADC_IN1 and COMP1_INP functions. |
| 16 | PA2 | bidirectional | 5 V tolerant I/O (FT) with USART2_TX, TIM2_CH3, TIM9_CH1, LCD_SEG1, ADC_IN2 and COMP1_INP functions. |
| 17 | PA3 | bidirectional | Standard 3.3 V I/O (TC) with USART2_RX, TIM2_CH4, TIM9_CH2, LCD_SEG2, ADC_IN3 and COMP1_INP functions. |
| 18 | VSS_4 | power_in | Ground pin. |
| 19 | VDD_4 | power_in | Digital supply pin. |
| 20 | PA4 | bidirectional | Standard 3.3 V I/O (TC) with SPI1_NSS, USART2_CK, ADC_IN4, DAC_OUT1 and COMP1_INP functions. |
| 21 | PA5 | bidirectional | Standard 3.3 V I/O (TC) with SPI1_SCK, TIM2_CH1_ETR, ADC_IN5, DAC_OUT2 and COMP1_INP functions. |
| 22 | PA6 | bidirectional | 5 V tolerant I/O (FT) with SPI1_MISO, TIM3_CH1, LCD_SEG3, TIM10_CH1, ADC_IN6 and COMP1_INP functions. |
| 23 | PA7 | bidirectional | 5 V tolerant I/O (FT) with SPI1_MOSI, TIM3_CH2, LCD_SEG4, TIM11_CH1, ADC_IN7 and COMP1_INP functions. |
| 24 | PC4 | bidirectional | 5 V tolerant I/O (FT) with LCD_SEG22, ADC_IN14 and COMP1_INP functions. |
| 25 | PC5 | bidirectional | 5 V tolerant I/O (FT) with LCD_SEG23, ADC_IN15 and COMP1_INP functions. |
| 26 | PB0 | bidirectional | Standard 3.3 V I/O (TC) with TIM3_CH3, LCD_SEG5, ADC_IN8, COMP1_INP and VREF_OUT functions. |
| 27 | PB1 | bidirectional | 5 V tolerant I/O (FT) with TIM3_CH4, LCD_SEG6, ADC_IN9, COMP1_INP and VREF_OUT functions. |
| 28 | PB2 | bidirectional | 5 V tolerant I/O (FT) that also serves as BOOT1, with VLCDRAIL1 function. |
| 29 | PB10 | bidirectional | 5 V tolerant I/O (FT) with I2C2_SCL, USART3_TX, TIM2_CH3 and LCD_SEG10 functions. |
| 30 | PB11 | bidirectional | 5 V tolerant I/O (FT) with I2C2_SDA, USART3_RX, TIM2_CH4 and LCD_SEG11 functions. |
| 31 | VSS_1 | power_in | Ground pin. |
| 32 | VDD_1 | power_in | Digital supply pin. |
| 33 | PB12 | bidirectional | 5 V tolerant I/O (FT) with SPI2_NSS, I2C2_SMBA, USART3_CK, LCD_SEG12, TIM10_CH1, ADC_IN18, COMP1_INP and VLCDRAIL2 functions. |
| 34 | PB13 | bidirectional | 5 V tolerant I/O (FT) with SPI2_SCK, USART3_CTS, LCD_SEG13, TIM9_CH1, ADC_IN19 and COMP1_INP functions. |
| 35 | PB14 | bidirectional | 5 V tolerant I/O (FT) with SPI2_MISO, USART3_RTS, LCD_SEG14, TIM9_CH2, ADC_IN20 and COMP1_INP functions. |
| 36 | PB15 | bidirectional | 5 V tolerant I/O (FT) with SPI2_MOSI, LCD_SEG15, TIM11_CH1, ADC_IN21, COMP1_INP and RTC_REFIN functions. |
| 37 | PC6 | bidirectional | 5 V tolerant I/O (FT) with TIM3_CH1 and LCD_SEG24 functions. |
| 38 | PC7 | bidirectional | 5 V tolerant I/O (FT) with TIM3_CH2 and LCD_SEG25 functions. |
| 39 | PC8 | bidirectional | 5 V tolerant I/O (FT) with TIM3_CH3 and LCD_SEG26 functions. |
| 40 | PC9 | bidirectional | 5 V tolerant I/O (FT) with TIM3_CH4 and LCD_SEG27 functions. |
| 41 | PA8 | bidirectional | 5 V tolerant I/O (FT) with USART1_CK, MCO and LCD_COM0 functions. |
| 42 | PA9 | bidirectional | 5 V tolerant I/O (FT) with USART1_TX and LCD_COM1 functions. |
| 43 | PA10 | bidirectional | 5 V tolerant I/O (FT) with USART1_RX and LCD_COM2 functions. |
| 44 | PA11 | bidirectional | 5 V tolerant I/O (FT) with USART1_CTS, SPI1_MISO and USB_DM functions. |
| 45 | PA12 | bidirectional | 5 V tolerant I/O (FT) with USART1_RTS, SPI1_MOSI and USB_DP functions. |
| 46 | PA13 | bidirectional | 5 V tolerant I/O (FT) whose reset function is JTMS-SWDIO (serial wire debug data). |
| 47 | VSS_2 | power_in | Ground pin. |
| 48 | VDD_2 | power_in | Digital supply pin. |
| 49 | PA14 | bidirectional | 5 V tolerant I/O (FT) whose reset function is JTCK-SWCLK (serial wire debug clock). |
| 50 | PA15 | bidirectional | 5 V tolerant I/O (FT) with JTDI, TIM2_CH1_ETR, SPI1_NSS and LCD_SEG17 functions. |
| 51 | PC10 | bidirectional | 5 V tolerant I/O (FT) with USART3_TX, LCD_SEG28, LCD_SEG40 and LCD_COM4 functions. |
| 52 | PC11 | bidirectional | 5 V tolerant I/O (FT) with USART3_RX, LCD_SEG29, LCD_SEG41 and LCD_COM5 functions. |
| 53 | PC12 | bidirectional | 5 V tolerant I/O (FT) with USART3_CK, LCD_SEG30, LCD_SEG42 and LCD_COM6 functions. |
| 54 | PD2 | bidirectional | 5 V tolerant I/O (FT) with TIM3_ETR, LCD_SEG31, LCD_SEG43 and LCD_COM7 functions. |
| 55 | PB3 | bidirectional | 5 V tolerant I/O (FT) with JTDO, TIM2_CH2, SPI1_SCK, LCD_SEG7 and COMP2_INM functions. |
| 56 | PB4 | bidirectional | 5 V tolerant I/O (FT) with NJTRST, TIM3_CH1, SPI1_MISO, LCD_SEG8 and COMP2_INP functions. |
| 57 | PB5 | bidirectional | 5 V tolerant I/O (FT) with I2C1_SMBA, TIM3_CH2, SPI1_MOSI, LCD_SEG9 and COMP2_INP functions. |
| 58 | PB6 | bidirectional | 5 V tolerant I/O (FT) with I2C1_SCL, TIM4_CH1 and USART1_TX functions. |
| 59 | PB7 | bidirectional | 5 V tolerant I/O (FT) with I2C1_SDA, TIM4_CH2, USART1_RX and PVD_IN functions. |
| 60 | BOOT0 | input | Dedicated BOOT0 pin used to select the boot mode. |
| 61 | PB8 | bidirectional | 5 V tolerant I/O (FT) with TIM4_CH3, I2C1_SCL, LCD_SEG16 and TIM10_CH1 functions. |
| 62 | PB9 | bidirectional | 5 V tolerant I/O (FT) with TIM4_CH4, I2C1_SDA, LCD_COM3 and TIM11_CH1 functions. |
| 63 | VSS_3 | power_in | Ground pin. |
| 64 | VDD_3 | power_in | Digital supply pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LQFP-64(10x10) |
| Category | Embedded Processors & Controllers |
| Pins | 64 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| External main supply voltage | VDD-VSS | -0.3 | 4 | V | including VDDA and VDD | 55 | |
| Input voltage on five-volt tolerant pin | VIN | -0.3 | V | VSS − 0.3 to VDD+4.0 | 55 | ||
| Input voltage on any other pin | VIN | -0.3 | 4 | V | VSS −0.3 to 4.0 | 55 | |
| Total current into all VDD_x power lines | ΣIVDD | 100 | mA | source | 55 | ||
| Total current out of all VSS_x ground lines | ΣIVSS | 100 | mA | sink | 55 | ||
| Maximum current into each VDD_x pin | IVDD(PIN) | 70 | mA | source | 55 | ||
| Output current sunk by any I/O and control pin | IIO | 25 | mA | 55 | |||
| Storage temperature range | TSTG | -65 | 150 | °C | 56 | ||
| Maximum junction temperature | TJ | 150 | °C | 56 | |||
| Standard operating voltage | VDD | 1.65 | 3.6 | V | BOR detector disabled | 56 | |
| Standard operating voltage, BOR enabled | VDD | 1.8 | 3.6 | V | BOR detector enabled, at power on | 56 | |
| Analog operating voltage (ADC or DAC used) | VDDA | 1.8 | 3.6 | V | Must be the same voltage as VDD | 56 | |
| Internal AHB clock frequency | fHCLK | 0 | 32 | MHz | 56 | ||
| Power dissipation LQFP64 | PD | 444 | mW | TA = 85 °C for suffix 6, LQFP64 package | 57 | ||
| Ambient temperature, suffix 6 | TA | -40 | 85 | °C | Maximum power dissipation | 57 | |
| Junction temperature range, suffix 6 | TJ | -40 | 105 | °C | 6 suffix version | 57 | |
| Power on/power down reset threshold, falling | VPOR/PDR | 1 | 1.5 | 1.65 | V | Falling edge | 57 |
| Power on/power down reset threshold, rising | VPOR/PDR | 1.3 | 1.5 | 1.65 | V | Rising edge | 57 |
| Reset temporization, BOR enabled | TRSTTEMPO | 2 | 3.3 | ms | VDD rising, BOR enabled | 57 | |
| Brown-out reset threshold 0, falling | VBOR0 | 1.67 | 1.7 | 1.74 | V | Falling edge | 58 |
| Brown-out reset threshold 4, falling | VBOR4 | 2.68 | 2.8 | 2.85 | V | Falling edge | 58 |
| Internal reference voltage | VREFINT out | 1.202 | 1.224 | 1.242 | V | , 40 °C < TJ < +110 °C | 59 |
| Internal reference current consumption | IREFINT | 1.4 | 2.3 | µA | 59 | ||
| Internal reference startup time | TVREFINT | 2 | 3 | ms | 59 | ||
| Temperature coefficient of VREFINT | TCoeff | 25 | 100 | ppm/°C | -40 °C < TJ < +110 °C | 59 | |
| Run mode current from Flash, Range 3, 1 MHz | IDD (Run from Flash) | 215 | 285 | µA | Range 3, VCORE=1.2 V, fHCLK 1 MHz | 61 | |
| Run mode current from Flash, Range 1, 32 MHz | IDD (Run from Flash) | 8.25 | 9.6 | mA | Range 1, VCORE=1.8 V, 32 MHz | 61 | |
| Run mode current from RAM, Range 1, 32 MHz | IDD (Run from RAM) | 7.15 | 8.5 | mA | Range 1, VCORE=1.8 V, 32 MHz | 62 | |
| Sleep mode current, Flash OFF, Range 1, 32 MHz | IDD (Sleep) | 1600 | 2350 | µA | Range 1, VCORE=1.8 V, 32 MHz, Flash OFF | 63 | |
| Low-power run current, RAM, 32 kHz, TA -40 to 25 °C | IDD (LP Run) | 10.9 | 12 | µA | MSI 65 kHz, fHCLK = 32 kHz, code from RAM, TA = -40 °C to 25 °C | 64 | |
| Low-power run current, RAM, 32 kHz, 85 °C | IDD (LP Run) | 16.5 | 23 | µA | MSI 65 kHz, fHCLK = 32 kHz, code from RAM, TA = 85 °C | 64 | |
| Max allowed current in Low-power run mode | IDD Max (LP Run) | 200 | µA | VDD from 1.65 V to 3.6 V | 64 | ||
| Low-power sleep current, Flash ON, 32 kHz | IDD (LP Sleep) | 15 | 16 | µA | MSI 65 kHz, fHCLK = 32 kHz, Flash ON, TA = -40 °C to 25 °C | 65 | |
| Stop mode with RTC (LSI), LCD OFF, 25 °C | IDD (Stop with RTC) | 1.38 | 4 | µA | RTC clocked by LSI, LCD OFF, TA = -40°C to 25°C | 66 | |
| Stop mode current, RTC disabled, 25 °C | IDD (Stop) | 0.434 | 1 | µA | Regulator in LP mode, LSI, HSI and HSE OFF, TA = -40°C to 25°C | 67 | |
| Stop mode current, RTC disabled, 105 °C | IDD (Stop) | 6.84 | 22 | µA | Regulator in LP mode, LSI, HSI and HSE OFF, TA = 105°C | 67 | |
| Standby mode with RTC (LSI), 25 °C | IDD (Standby with RTC) | 1.11 | 1.9 | µA | RTC clocked by LSI, TA = -40 °C to 25 °C | 68 | |
| Standby mode current, RTC disabled, 25 °C | IDD (Standby) | 0.277 | 0.6 | µA | Independent watchdog and LSI OFF, TA = -40 °C to 25 °C | 68 | |
| Standby mode current, RTC disabled, 105 °C | IDD (Standby) | 1.09 | 7 | µA | Independent watchdog and LSI OFF, TA = 105 °C | 68 | |
| Wakeup from Stop mode, regulator in LP mode, Range 1 and 2 | tWUSTOP | 7.7 | 8.9 | µs | fHCLK = fMSI = 4.2 MHz, Voltage Range 1 and 2 | 71 | |
| Wakeup from Standby mode, FWU bit = 1 | tWUSTDBY | 58 | 104 | µs | FWU bit = 1, fHCLK = MSI = 2.1 MHz | 71 | |
| Wakeup from Standby mode, FWU bit = 0 | tWUSTDBY | 2.6 | 3.25 | ms | FWU bit = 0, fHCLK = MSI = 2.1 MHz | 71 | |
| HSE user external clock frequency, CSS on or PLL used | fHSE_ext | 1 | 32 | MHz | CSS is on or PLL is used | 72 | |
| HSE oscillator frequency | fOSC_IN | 1 | 24 | MHz | 73 | ||
| LSE user external clock frequency | fLSE_ext | 1 | 32.768 | 1000 | kHz | 73 | |
| HSI frequency | fHSI | 16 | MHz | VDD = 3.0 V | 77 | ||
| HSI accuracy, VDDA = 1.65 V to 3.6 V | ACCHSI | -4 | 3 | % | VDDA = 1.65 V to 3.6 V, TA = -40 to 105 °C | 77 | |
| LSI frequency | fLSI | 26 | 38 | 56 | kHz | 77 | |
| PLL input clock | fPLL_IN | 2 | 24 | MHz | 79 | ||
| PLL output clock | fPLL_OUT | 2 | 32 | MHz | 79 | ||
| PLL lock time | tLOCK | 115 | 160 | µs | PLL input = 16 MHz, PLL VCO = 96 MHz | 79 | |
| Flash/EEPROM operating voltage | VDD | 1.65 | 3.6 | V | Read / Write / Erase | 80 | |
| Flash programming time | tprog | 3.28 | 3.94 | ms | Programming | 80 | |
| Flash cycling endurance, program memory | NCYC | 10 | kcycles | TA = -40°C to 105 °C | 80 | ||
| ESD voltage HBM | VESD(HBM) | 2000 | V | TA = +25 °C, JESD22-A114 | 82 | ||
| Input low level voltage, TC and FT I/O | VIL | 0.3 | V | TC and FT I/O, printed as 0.3 VDD | 84 | ||
| Weak pull-up equivalent resistor | RPU | 25 | 45 | 65 | kΩ | VIN = VSS | 84 |
| Output low level voltage, IIO = 8 mA | VOL | 0.4 | V | IIO = 8 mA, 2.7 V < VDD < 3.6 V | 85 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | TLEAD Maximum lead temperature during soldering see note (1) 1. Compliant with JEDEC Std J-STD-020D (for small body, Sn-Pb or Pb assembly), the ST ECOPACK® | 56 |
CAD (KiCad official)
- Symbol:
STM32L151RBT6ATR - Footprint:
Package_QFP:LQFP-64_10x10mm_P0.5mm - 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files:
stm32l151rbt6atr-etched.step/stm32l151rbt6atr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32l151rbt6atr.step/stm32l151rbt6atr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (130 pp, sha256
e5e0ab791f4e7879, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).