main
Ray
Publish 0.1.0
bd1ec16
STM32L151CBU6TR
STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · VQFN-48-EP(7x7)
STM32L151CBU6TR from STMicroelectronics, in a VQFN-48-EP(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VLCD | power_in | LCD power supply pin; per footnote 3 it applies to STM32L152 devices only, so on STM32L151 devices it should be connected to VDD. |
| 2 | PC13-WKUP2 | bidirectional | 5 V tolerant (FT) I/O with additional functions RTC_TAMP1, RTC_TS, RTC_OUT and the WKUP2 wake-up input. |
| 3 | PC14-OSC32_IN | bidirectional | Standard 3.3 V (TC) I/O that is used as the OSC32_IN LSE input only when the LSE oscillator is on, otherwise it is a general-purpose PC14. |
| 4 | PC15-OSC32_OUT | bidirectional | Standard 3.3 V (TC) I/O that is used as the OSC32_OUT LSE output only when the LSE oscillator is on, otherwise it is a general-purpose PC15. |
| 5 | PH0-OSC_IN | bidirectional | Standard 3.3 V (TC) I/O that is used as the OSC_IN HSE input only when the HSE oscillator is on, otherwise it is a general-purpose PH0. |
| 6 | PH1-OSC_OUT | bidirectional | Standard 3.3 V (TC) I/O that is used as the OSC_OUT HSE output only when the HSE oscillator is on, otherwise it is a general-purpose PH1. |
| 7 | NRST | bidirectional | Bidirectional active-low reset with embedded weak pull-up (RPU 30 to 60 kΩ); input low level is 0.8 V max and input high level is 1.4 V min. |
| 8 | VSSA | power_in | Analog ground pin that must be connected to VSS. |
| 9 | VDDA | power_in | Analog supply for ADC, reset blocks, RCs and PLL that must equal VDD, with a minimum of 1.8 V when the ADC is used. |
| 10 | PA0-WKUP1 | bidirectional | 5 V tolerant (FT) I/O with alternate functions USART2_CTS and TIM2_CH1_ETR and additional functions WKUP1, ADC_IN0 and COMP1_INP. |
| 11 | PA1 | bidirectional | 5 V tolerant (FT) I/O with alternate functions USART2_RTS and TIM2_CH2 and additional functions ADC_IN1 and COMP1_INP. |
| 12 | PA2 | bidirectional | 5 V tolerant (FT) I/O with alternate functions USART2_TX, TIM2_CH3 and TIM9_CH1 and additional functions ADC_IN2 and COMP1_INP. |
| 13 | PA3 | bidirectional | Standard 3.3 V (TC) I/O with alternate functions USART2_RX, TIM2_CH4 and TIM9_CH2 and additional functions ADC_IN3 and COMP1_INP. |
| 14 | PA4 | bidirectional | Standard 3.3 V (TC) I/O with alternate functions SPI1_NSS and USART2_CK and additional functions ADC_IN4, DAC_OUT1 and COMP1_INP. |
| 15 | PA5 | bidirectional | Standard 3.3 V (TC) I/O with alternate functions SPI1_SCK and TIM2_CH1_ETR and additional functions ADC_IN5, DAC_OUT2 and COMP1_INP. |
| 16 | PA6 | bidirectional | 5 V tolerant (FT) I/O with alternate functions SPI1_MISO, TIM3_CH1 and TIM10_CH1 and additional functions ADC_IN6 and COMP1_INP. |
| 17 | PA7 | bidirectional | 5 V tolerant (FT) I/O with alternate functions SPI1_MOSI, TIM3_CH2 and TIM11_CH1 and additional functions ADC_IN7 and COMP1_INP. |
| 18 | PB0 | bidirectional | Standard 3.3 V (TC) I/O with alternate function TIM3_CH3 and additional functions ADC_IN8, COMP1_INP and VREF_OUT. |
| 19 | PB1 | bidirectional | 5 V tolerant (FT) I/O with alternate function TIM3_CH4 and additional functions ADC_IN9, COMP1_INP and VREF_OUT. |
| 20 | PB2 | bidirectional | 5 V tolerant (FT) I/O that is also the BOOT1 boot-configuration pin. |
| 21 | PB10 | bidirectional | 5 V tolerant (FT) I/O with alternate functions I2C2_SCL, USART3_TX and TIM2_CH3. |
| 22 | PB11 | bidirectional | 5 V tolerant (FT) I/O with alternate functions I2C2_SDA, USART3_RX and TIM2_CH4. |
| 23 | VSS_1 | power_in | Ground pin that must be connected to the external ground supply. |
| 24 | VDD_1 | power_in | Main supply pin for I/Os and the internal regulator, 1.65 V to 3.6 V (1.8 V to 3.6 V when BOR is enabled at power-on). |
| 25 | PB12 | bidirectional | 5 V tolerant (FT) I/O with alternate functions SPI2_NSS, I2C2_SMBA, USART3_CK and TIM10_CH1 and additional functions ADC_IN18 and COMP1_INP. |
| 26 | PB13 | bidirectional | 5 V tolerant (FT) I/O with alternate functions SPI2_SCK, USART3_CTS and TIM9_CH1 and additional functions ADC_IN19 and COMP1_INP. |
| 27 | PB14 | bidirectional | 5 V tolerant (FT) I/O with alternate functions SPI2_MISO, USART3_RTS and TIM9_CH2 and additional functions ADC_IN20 and COMP1_INP. |
| 28 | PB15 | bidirectional | 5 V tolerant (FT) I/O with alternate functions SPI2_MOSI and TIM11_CH1 and additional functions ADC_IN21, COMP1_INP and RTC_REFIN. |
| 29 | PA8 | bidirectional | 5 V tolerant (FT) I/O with alternate functions MCO and USART1_CK. |
| 30 | PA9 | bidirectional | 5 V tolerant (FT) I/O with alternate function USART1_TX. |
| 31 | PA10 | bidirectional | 5 V tolerant (FT) I/O with alternate function USART1_RX. |
| 32 | PA11 | bidirectional | 5 V tolerant (FT) I/O with alternate functions USART1_CTS and SPI1_MISO and additional function USB_DM. |
| 33 | PA12 | bidirectional | 5 V tolerant (FT) I/O with alternate functions USART1_RTS and SPI1_MOSI and additional function USB_DP. |
| 34 | PA13 | bidirectional | 5 V tolerant (FT) I/O whose function after reset is JTMS-SWDIO (serial wire debug data). |
| 35 | VSS_2 | power_in | Ground pin that must be connected to the external ground supply. |
| 36 | VDD_2 | power_in | Main supply pin for I/Os and the internal regulator, 1.65 V to 3.6 V (1.8 V to 3.6 V when BOR is enabled at power-on). |
| 37 | PA14 | bidirectional | 5 V tolerant (FT) I/O whose function after reset is JTCK-SWCLK (serial wire debug clock). |
| 38 | PA15 | bidirectional | 5 V tolerant (FT) I/O whose function after reset is JTDI, with alternate functions TIM2_CH1_ETR and SPI1_NSS. |
| 39 | PB3 | bidirectional | 5 V tolerant (FT) I/O whose function after reset is JTDO, with alternate functions TIM2_CH2 and SPI1_SCK and additional function COMP2_INM. |
| 40 | PB4 | bidirectional | 5 V tolerant (FT) I/O whose function after reset is NJTRST, with alternate functions TIM3_CH1 and SPI1_MISO and additional function COMP2_INP. |
| 41 | PB5 | bidirectional | 5 V tolerant (FT) I/O with alternate functions I2C1_SMBA, TIM3_CH2 and SPI1_MOSI and additional function COMP2_INP. |
| 42 | PB6 | bidirectional | 5 V tolerant (FT) I/O with alternate functions I2C1_SCL, TIM4_CH1 and USART1_TX. |
| 43 | PB7 | bidirectional | 5 V tolerant (FT) I/O with alternate functions I2C1_SDA, TIM4_CH2 and USART1_RX and additional function PVD_IN. |
| 44 | BOOT0 | input | Dedicated BOOT0 boot-mode selection input. |
| 45 | PB8 | bidirectional | 5 V tolerant (FT) I/O with alternate functions TIM4_CH3, I2C1_SCL and TIM10_CH1. |
| 46 | PB9 | bidirectional | 5 V tolerant (FT) I/O with alternate functions TIM4_CH4, I2C1_SDA and TIM11_CH1. |
| 47 | VSS_3 | power_in | Ground pin that must be connected to the external ground supply. |
| 48 | VDD_3 | power_in | Main supply pin for I/Os and the internal regulator, 1.65 V to 3.6 V (1.8 V to 3.6 V when BOR is enabled at power-on). |
| 49 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | VQFN-48-EP(7x7) |
| Category | Embedded Processors & Controllers |
| Pins | 49 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| External main supply voltage (including VDDA and VDD) | VDD-VSS | -0.3 | 4 | V | 52 | ||
| Input voltage on any other pin | VIN | 4 | V | 52 | |||
| Allowed voltage difference for VREF+ > VDDA | VREF+ −VDDA | 0.4 | V | 52 | |||
| Variations between different VDD power pins | /ΔVDDx/ | 50 | mV | 52 | |||
| Variations between all different ground pins | /VSSX −VSS/ | 50 | mV | 52 | |||
| Total current into VDD/VDDA power lines (source) | IVDDΣ | 80 | mA | 52 | |||
| Total current out of VSS ground lines (sink) | IVSSΣ | 80 | mA | 52 | |||
| Output current sunk by any I/O and control pin | IIO | 25 | mA | 52 | |||
| Output current sourced by any I/O and control pin | IIO | 25 | mA | 52 | |||
| Injected current on five-volt tolerant I/O | IINJ(PIN) | -5 | 0 | mA | 52 | ||
| Injected current on any other pin | IINJ(PIN) | -5 | 5 | mA | 52 | ||
| Total injected current (sum of all I/O and control pins) | ΣIINJ(PIN) | -25 | 25 | mA | 52 | ||
| Storage temperature range | TSTG | -65 | 150 | °C | 53 | ||
| Maximum junction temperature | TJ | 150 | °C | 53 | |||
| Internal AHB clock frequency | fHCLK | 0 | 32 | MHz | 53 | ||
| Internal APB1 clock frequency | fPCLK1 | 0 | 32 | MHz | 53 | ||
| Internal APB2 clock frequency | fPCLK2 | 0 | 32 | MHz | 53 | ||
| Standard operating voltage | VDD | 1.65 | 3.6 | V | BOR detector disabled | 53 | |
| Standard operating voltage | VDD | 1.8 | 3.6 | V | BOR detector enabled, at power on | 53 | |
| Analog operating voltage | VDDA | 1.65 | 3.6 | V | ADC and DAC not used | 53 | |
| Analog operating voltage | VDDA | 1.8 | 3.6 | V | ADC or DAC used | 53 | |
| Input voltage on FT pins | VIN | -0.3 | 5.5 | V | 2.0 V ≤VDD ≤ 3.6 V | 53 | |
| Input voltage on FT pins | VIN | -0.3 | 5.25 | V | 1.65 V ≤ VDD ≤ 2.0 V | 53 | |
| Input voltage on BOOT0 pin | VIN | 0 | 5.5 | V | 53 | ||
| Input voltage on any other pin | VIN | -0.3 | V | 53 | |||
| Temperature range (maximum power dissipation) | TA | -40 | 85 | °C | Maximum power dissipation | 53 | |
| Temperature range (low power dissipation) | TA | -40 | 105 | °C | Low power dissipation | 53 | |
| Junction temperature range | TJ | -40 | 105 | °C | -40 °C ≤ TA ≤ 105°C | 53 | |
| Reset temporization | TRSTTEMPO | 2 | 3.3 | ms | VDD rising, BOR enabled | 54 | |
| Reset temporization | TRSTTEMPO | 0.4 | 0.7 | 1.6 | ms | VDD rising, BOR disabled | 54 |
| Power on/power down reset threshold | VPOR/PDR | 1 | 1.5 | 1.65 | V | Falling edge | 54 |
| Power on/power down reset threshold | VPOR/PDR | 1.3 | 1.5 | 1.65 | V | Rising edge | 54 |
| Brown-out reset threshold 0 | VBOR0 | 1.67 | 1.7 | 1.74 | V | Falling edge | 54 |
| Brown-out reset threshold 0 | VBOR0 | 1.69 | 1.76 | 1.8 | V | Rising edge | 54 |
| Brown-out reset threshold 1 | VBOR1 | 1.87 | 1.93 | 1.97 | V | Falling edge | 54 |
| Brown-out reset threshold 1 | VBOR1 | 1.96 | 2.03 | 2.07 | V | Rising edge | 54 |
| Brown-out reset threshold 2 | VBOR2 | 2.22 | 2.3 | 2.35 | V | Falling edge | 54 |
| Brown-out reset threshold 2 | VBOR2 | 2.31 | 2.41 | 2.44 | V | Rising edge | 54 |
| Brown-out reset threshold 3 | VBOR3 | 2.45 | 2.55 | 2.6 | V | Falling edge | 54 |
| Brown-out reset threshold 3 | VBOR3 | 2.54 | 2.66 | 2.7 | V | Rising edge | 54 |
| Brown-out reset threshold 4 | VBOR4 | 2.68 | 2.8 | 2.85 | V | Falling edge | 54 |
| Brown-out reset threshold 4 | VBOR4 | 2.78 | 2.9 | 2.95 | V | Rising edge | 54 |
| Internal reference voltage | VREFINT out | 1.202 | 1.224 | 1.242 | V | -40 °C < TJ < +105 °C | 56 |
| Temperature coefficient | TCoeff | 25 | 100 | ppm/°C | -40 °C < TJ < +105 °C | 56 | |
| Supply current in Run mode, code executed from Flash | IDD (Run from Flash) | 9.6 | 11 | mA | Range 1, VCORE=1.8 V VOS[1:0]=01, fHCLK 32 MHz (PLL on); max over 55/85/105 °C | 58 | |
| Supply current in Stop mode (RTC disabled) | IDD (Stop) | 0.5 | 0.9 | µA | Regulator in LP mode, LSI, HSI and HSE OFF (no independent watchdog), TA = -40 °C to 25 °C | 65 | |
| Supply current in Standby mode with RTC disabled | IDD (Standby) | 0.3 | 0.55 | µA | Independent watchdog and LSI OFF, TA = -40 °C to 25 °C | 66 | |
| Supply current in Standby mode with RTC disabled | IDD (Standby) | 2.5 | 4 | µA | Independent watchdog and LSI OFF, TA = 105 °C | 66 | |
| Oscillator frequency (HSE) | fOSC_IN | 1 | 24 | MHz | 72 | ||
| Accuracy of the factory-calibrated HSI oscillator | ACCHSI | -4 | 3 | % | VDDA = 1.65 V to 3.6 V, TA = -40 to 105 °C | 75 | |
| LSI frequency | fLSI | 26 | 38 | 56 | kHz | 75 | |
| LSI oscillator frequency drift | DLSI | -10 | 4 | % | 0 °C ≤ TA ≤ 85 °C | 75 | |
| Frequency error after factory calibration (MSI) | ACCMSI | -0.5 | 0.5 | % | 76 | ||
| PLL input clock | fPLL_IN | 2 | 24 | MHz | 77 | ||
| PLL output clock | fPLL_OUT | 2 | 32 | MHz | 77 | ||
| Current consumption on VDDA (PLL) | IDDA(PLL) | 220 | 450 | µA | 77 | ||
| Current consumption on VDD (PLL) | IDD(PLL) | 120 | 150 | µA | 77 | ||
| NRST input low level voltage | VIL(NRST) | 0.8 | V | 85 | |||
| Weak pull-up equivalent resistor | RPU | 30 | 45 | 60 | kΩ | VIN = VSS | 85 |
CAD (KiCad official)
- Symbol:
STM32L151CBU6TR - Footprint:
Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm - 3D model: VQFN-48-EP(7x7), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.55 mm tall, datasheet A, nominal). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
stm32l151cbu6tr-etched.step/stm32l151cbu6tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32l151cbu6tr.step/stm32l151cbu6tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (133 pp, sha256
5223296de36fe904, retrieved 2026-11-10, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# STM32L151CBU6TR
**STMicroelectronics** · Microcontrollers (MCU/MPU/SOC) · VQFN-48-EP(7x7)
STM32L151CBU6TR from STMicroelectronics, in a VQFN-48-EP(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VLCD | power_in | LCD power supply pin; per footnote 3 it applies to STM32L152 devices only, so on STM32L151 devices it should be connected to VDD. |
| 2 | PC13-WKUP2 | bidirectional | 5 V tolerant (FT) I/O with additional functions RTC_TAMP1, RTC_TS, RTC_OUT and the WKUP2 wake-up input. |
| 3 | PC14-OSC32_IN | bidirectional | Standard 3.3 V (TC) I/O that is used as the OSC32_IN LSE input only when the LSE oscillator is on, otherwise it is a general-purpose PC14. |
| 4 | PC15-OSC32_OUT | bidirectional | Standard 3.3 V (TC) I/O that is used as the OSC32_OUT LSE output only when the LSE oscillator is on, otherwise it is a general-purpose PC15. |
| 5 | PH0-OSC_IN | bidirectional | Standard 3.3 V (TC) I/O that is used as the OSC_IN HSE input only when the HSE oscillator is on, otherwise it is a general-purpose PH0. |
| 6 | PH1-OSC_OUT | bidirectional | Standard 3.3 V (TC) I/O that is used as the OSC_OUT HSE output only when the HSE oscillator is on, otherwise it is a general-purpose PH1. |
| 7 | NRST | bidirectional | Bidirectional active-low reset with embedded weak pull-up (RPU 30 to 60 kΩ); input low level is 0.8 V max and input high level is 1.4 V min. |
| 8 | VSSA | power_in | Analog ground pin that must be connected to VSS. |
| 9 | VDDA | power_in | Analog supply for ADC, reset blocks, RCs and PLL that must equal VDD, with a minimum of 1.8 V when the ADC is used. |
| 10 | PA0-WKUP1 | bidirectional | 5 V tolerant (FT) I/O with alternate functions USART2_CTS and TIM2_CH1_ETR and additional functions WKUP1, ADC_IN0 and COMP1_INP. |
| 11 | PA1 | bidirectional | 5 V tolerant (FT) I/O with alternate functions USART2_RTS and TIM2_CH2 and additional functions ADC_IN1 and COMP1_INP. |
| 12 | PA2 | bidirectional | 5 V tolerant (FT) I/O with alternate functions USART2_TX, TIM2_CH3 and TIM9_CH1 and additional functions ADC_IN2 and COMP1_INP. |
| 13 | PA3 | bidirectional | Standard 3.3 V (TC) I/O with alternate functions USART2_RX, TIM2_CH4 and TIM9_CH2 and additional functions ADC_IN3 and COMP1_INP. |
| 14 | PA4 | bidirectional | Standard 3.3 V (TC) I/O with alternate functions SPI1_NSS and USART2_CK and additional functions ADC_IN4, DAC_OUT1 and COMP1_INP. |
| 15 | PA5 | bidirectional | Standard 3.3 V (TC) I/O with alternate functions SPI1_SCK and TIM2_CH1_ETR and additional functions ADC_IN5, DAC_OUT2 and COMP1_INP. |
| 16 | PA6 | bidirectional | 5 V tolerant (FT) I/O with alternate functions SPI1_MISO, TIM3_CH1 and TIM10_CH1 and additional functions ADC_IN6 and COMP1_INP. |
| 17 | PA7 | bidirectional | 5 V tolerant (FT) I/O with alternate functions SPI1_MOSI, TIM3_CH2 and TIM11_CH1 and additional functions ADC_IN7 and COMP1_INP. |
| 18 | PB0 | bidirectional | Standard 3.3 V (TC) I/O with alternate function TIM3_CH3 and additional functions ADC_IN8, COMP1_INP and VREF_OUT. |
| 19 | PB1 | bidirectional | 5 V tolerant (FT) I/O with alternate function TIM3_CH4 and additional functions ADC_IN9, COMP1_INP and VREF_OUT. |
| 20 | PB2 | bidirectional | 5 V tolerant (FT) I/O that is also the BOOT1 boot-configuration pin. |
| 21 | PB10 | bidirectional | 5 V tolerant (FT) I/O with alternate functions I2C2_SCL, USART3_TX and TIM2_CH3. |
| 22 | PB11 | bidirectional | 5 V tolerant (FT) I/O with alternate functions I2C2_SDA, USART3_RX and TIM2_CH4. |
| 23 | VSS_1 | power_in | Ground pin that must be connected to the external ground supply. |
| 24 | VDD_1 | power_in | Main supply pin for I/Os and the internal regulator, 1.65 V to 3.6 V (1.8 V to 3.6 V when BOR is enabled at power-on). |
| 25 | PB12 | bidirectional | 5 V tolerant (FT) I/O with alternate functions SPI2_NSS, I2C2_SMBA, USART3_CK and TIM10_CH1 and additional functions ADC_IN18 and COMP1_INP. |
| 26 | PB13 | bidirectional | 5 V tolerant (FT) I/O with alternate functions SPI2_SCK, USART3_CTS and TIM9_CH1 and additional functions ADC_IN19 and COMP1_INP. |
| 27 | PB14 | bidirectional | 5 V tolerant (FT) I/O with alternate functions SPI2_MISO, USART3_RTS and TIM9_CH2 and additional functions ADC_IN20 and COMP1_INP. |
| 28 | PB15 | bidirectional | 5 V tolerant (FT) I/O with alternate functions SPI2_MOSI and TIM11_CH1 and additional functions ADC_IN21, COMP1_INP and RTC_REFIN. |
| 29 | PA8 | bidirectional | 5 V tolerant (FT) I/O with alternate functions MCO and USART1_CK. |
| 30 | PA9 | bidirectional | 5 V tolerant (FT) I/O with alternate function USART1_TX. |
| 31 | PA10 | bidirectional | 5 V tolerant (FT) I/O with alternate function USART1_RX. |
| 32 | PA11 | bidirectional | 5 V tolerant (FT) I/O with alternate functions USART1_CTS and SPI1_MISO and additional function USB_DM. |
| 33 | PA12 | bidirectional | 5 V tolerant (FT) I/O with alternate functions USART1_RTS and SPI1_MOSI and additional function USB_DP. |
| 34 | PA13 | bidirectional | 5 V tolerant (FT) I/O whose function after reset is JTMS-SWDIO (serial wire debug data). |
| 35 | VSS_2 | power_in | Ground pin that must be connected to the external ground supply. |
| 36 | VDD_2 | power_in | Main supply pin for I/Os and the internal regulator, 1.65 V to 3.6 V (1.8 V to 3.6 V when BOR is enabled at power-on). |
| 37 | PA14 | bidirectional | 5 V tolerant (FT) I/O whose function after reset is JTCK-SWCLK (serial wire debug clock). |
| 38 | PA15 | bidirectional | 5 V tolerant (FT) I/O whose function after reset is JTDI, with alternate functions TIM2_CH1_ETR and SPI1_NSS. |
| 39 | PB3 | bidirectional | 5 V tolerant (FT) I/O whose function after reset is JTDO, with alternate functions TIM2_CH2 and SPI1_SCK and additional function COMP2_INM. |
| 40 | PB4 | bidirectional | 5 V tolerant (FT) I/O whose function after reset is NJTRST, with alternate functions TIM3_CH1 and SPI1_MISO and additional function COMP2_INP. |
| 41 | PB5 | bidirectional | 5 V tolerant (FT) I/O with alternate functions I2C1_SMBA, TIM3_CH2 and SPI1_MOSI and additional function COMP2_INP. |
| 42 | PB6 | bidirectional | 5 V tolerant (FT) I/O with alternate functions I2C1_SCL, TIM4_CH1 and USART1_TX. |
| 43 | PB7 | bidirectional | 5 V tolerant (FT) I/O with alternate functions I2C1_SDA, TIM4_CH2 and USART1_RX and additional function PVD_IN. |
| 44 | BOOT0 | input | Dedicated BOOT0 boot-mode selection input. |
| 45 | PB8 | bidirectional | 5 V tolerant (FT) I/O with alternate functions TIM4_CH3, I2C1_SCL and TIM10_CH1. |
| 46 | PB9 | bidirectional | 5 V tolerant (FT) I/O with alternate functions TIM4_CH4, I2C1_SDA and TIM11_CH1. |
| 47 | VSS_3 | power_in | Ground pin that must be connected to the external ground supply. |
| 48 | VDD_3 | power_in | Main supply pin for I/Os and the internal regulator, 1.65 V to 3.6 V (1.8 V to 3.6 V when BOR is enabled at power-on). |
| 49 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | VQFN-48-EP(7x7) |
| Category | Embedded Processors & Controllers |
| Pins | 49 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| External main supply voltage (including VDDA and VDD) | VDD-VSS | -0.3 | | 4 | V | | 52 |
| Input voltage on any other pin | VIN | | | 4 | V | | 52 |
| Allowed voltage difference for VREF+ > VDDA | VREF+ −VDDA | | | 0.4 | V | | 52 |
| Variations between different VDD power pins | /ΔVDDx/ | | | 50 | mV | | 52 |
| Variations between all different ground pins | /VSSX −VSS/ | | | 50 | mV | | 52 |
| Total current into VDD/VDDA power lines (source) | IVDDΣ | | | 80 | mA | | 52 |
| Total current out of VSS ground lines (sink) | IVSSΣ | | | 80 | mA | | 52 |
| Output current sunk by any I/O and control pin | IIO | | | 25 | mA | | 52 |
| Output current sourced by any I/O and control pin | IIO | | | 25 | mA | | 52 |
| Injected current on five-volt tolerant I/O | IINJ(PIN) | -5 | | 0 | mA | | 52 |
| Injected current on any other pin | IINJ(PIN) | -5 | | 5 | mA | | 52 |
| Total injected current (sum of all I/O and control pins) | ΣIINJ(PIN) | -25 | | 25 | mA | | 52 |
| Storage temperature range | TSTG | -65 | | 150 | °C | | 53 |
| Maximum junction temperature | TJ | | | 150 | °C | | 53 |
| Internal AHB clock frequency | fHCLK | 0 | | 32 | MHz | | 53 |
| Internal APB1 clock frequency | fPCLK1 | 0 | | 32 | MHz | | 53 |
| Internal APB2 clock frequency | fPCLK2 | 0 | | 32 | MHz | | 53 |
| Standard operating voltage | VDD | 1.65 | | 3.6 | V | BOR detector disabled | 53 |
| Standard operating voltage | VDD | 1.8 | | 3.6 | V | BOR detector enabled, at power on | 53 |
| Analog operating voltage | VDDA | 1.65 | | 3.6 | V | ADC and DAC not used | 53 |
| Analog operating voltage | VDDA | 1.8 | | 3.6 | V | ADC or DAC used | 53 |
| Input voltage on FT pins | VIN | -0.3 | | 5.5 | V | 2.0 V ≤VDD ≤ 3.6 V | 53 |
| Input voltage on FT pins | VIN | -0.3 | | 5.25 | V | 1.65 V ≤ VDD ≤ 2.0 V | 53 |
| Input voltage on BOOT0 pin | VIN | 0 | | 5.5 | V | | 53 |
| Input voltage on any other pin | VIN | -0.3 | | | V | | 53 |
| Temperature range (maximum power dissipation) | TA | -40 | | 85 | °C | Maximum power dissipation | 53 |
| Temperature range (low power dissipation) | TA | -40 | | 105 | °C | Low power dissipation | 53 |
| Junction temperature range | TJ | -40 | | 105 | °C | -40 °C ≤ TA ≤ 105°C | 53 |
| Reset temporization | TRSTTEMPO | | 2 | 3.3 | ms | VDD rising, BOR enabled | 54 |
| Reset temporization | TRSTTEMPO | 0.4 | 0.7 | 1.6 | ms | VDD rising, BOR disabled | 54 |
| Power on/power down reset threshold | VPOR/PDR | 1 | 1.5 | 1.65 | V | Falling edge | 54 |
| Power on/power down reset threshold | VPOR/PDR | 1.3 | 1.5 | 1.65 | V | Rising edge | 54 |
| Brown-out reset threshold 0 | VBOR0 | 1.67 | 1.7 | 1.74 | V | Falling edge | 54 |
| Brown-out reset threshold 0 | VBOR0 | 1.69 | 1.76 | 1.8 | V | Rising edge | 54 |
| Brown-out reset threshold 1 | VBOR1 | 1.87 | 1.93 | 1.97 | V | Falling edge | 54 |
| Brown-out reset threshold 1 | VBOR1 | 1.96 | 2.03 | 2.07 | V | Rising edge | 54 |
| Brown-out reset threshold 2 | VBOR2 | 2.22 | 2.3 | 2.35 | V | Falling edge | 54 |
| Brown-out reset threshold 2 | VBOR2 | 2.31 | 2.41 | 2.44 | V | Rising edge | 54 |
| Brown-out reset threshold 3 | VBOR3 | 2.45 | 2.55 | 2.6 | V | Falling edge | 54 |
| Brown-out reset threshold 3 | VBOR3 | 2.54 | 2.66 | 2.7 | V | Rising edge | 54 |
| Brown-out reset threshold 4 | VBOR4 | 2.68 | 2.8 | 2.85 | V | Falling edge | 54 |
| Brown-out reset threshold 4 | VBOR4 | 2.78 | 2.9 | 2.95 | V | Rising edge | 54 |
| Internal reference voltage | VREFINT out | 1.202 | 1.224 | 1.242 | V | -40 °C < TJ < +105 °C | 56 |
| Temperature coefficient | TCoeff | | 25 | 100 | ppm/°C | -40 °C < TJ < +105 °C | 56 |
| Supply current in Run mode, code executed from Flash | IDD (Run from Flash) | | 9.6 | 11 | mA | Range 1, VCORE=1.8 V VOS[1:0]=01, fHCLK 32 MHz (PLL on); max over 55/85/105 °C | 58 |
| Supply current in Stop mode (RTC disabled) | IDD (Stop) | | 0.5 | 0.9 | µA | Regulator in LP mode, LSI, HSI and HSE OFF (no independent watchdog), TA = -40 °C to 25 °C | 65 |
| Supply current in Standby mode with RTC disabled | IDD (Standby) | | 0.3 | 0.55 | µA | Independent watchdog and LSI OFF, TA = -40 °C to 25 °C | 66 |
| Supply current in Standby mode with RTC disabled | IDD (Standby) | | 2.5 | 4 | µA | Independent watchdog and LSI OFF, TA = 105 °C | 66 |
| Oscillator frequency (HSE) | fOSC_IN | 1 | | 24 | MHz | | 72 |
| Accuracy of the factory-calibrated HSI oscillator | ACCHSI | -4 | | 3 | % | VDDA = 1.65 V to 3.6 V, TA = -40 to 105 °C | 75 |
| LSI frequency | fLSI | 26 | 38 | 56 | kHz | | 75 |
| LSI oscillator frequency drift | DLSI | -10 | | 4 | % | 0 °C ≤ TA ≤ 85 °C | 75 |
| Frequency error after factory calibration (MSI) | ACCMSI | -0.5 | | 0.5 | % | | 76 |
| PLL input clock | fPLL_IN | 2 | | 24 | MHz | | 77 |
| PLL output clock | fPLL_OUT | 2 | | 32 | MHz | | 77 |
| Current consumption on VDDA (PLL) | IDDA(PLL) | | 220 | 450 | µA | | 77 |
| Current consumption on VDD (PLL) | IDD(PLL) | | 120 | 150 | µA | | 77 |
| NRST input low level voltage | VIL(NRST) | | | 0.8 | V | | 85 |
| Weak pull-up equivalent resistor | RPU | 30 | 45 | 60 | kΩ | VIN = VSS | 85 |
## CAD (KiCad official)
- Symbol: `STM32L151CBU6TR`
- Footprint: `Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm`
- 3D model: VQFN-48-EP(7x7), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.55 mm tall, datasheet A, nominal). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `stm32l151cbu6tr-etched.step` / `stm32l151cbu6tr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32l151cbu6tr.step` / `stm32l151cbu6tr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [STMicroelectronics datasheet](https://www.st.com/resource/en/datasheet/stm32l151cbu6tr.pdf) (133 pp, sha256 `5223296de36fe904`, retrieved 2026-11-10, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/stm32l151cbu6tr-datasheet.pdf)