main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers stm32l151cbu6tr: viewers rendered from the public page · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
stm32l151cbu6tr-etched.glb Publish 0.1.0 · Ray
stm32l151cbu6tr-etched.step stm32l151cbu6tr: factory component page (tier=mfr) · Ray
stm32l151cbu6tr-hero.glb stm32l151cbu6tr: hero GLB from the etched model (keeps the MPN mark) · Ray
stm32l151cbu6tr-hero.overlay.json Publish 0.1.0 · Ray
stm32l151cbu6tr.glb Publish 0.1.0 · Ray
stm32l151cbu6tr.kicad_mod Publish 0.1.0 · Ray
stm32l151cbu6tr.kicad_sym Publish 0.1.0 · Ray
stm32l151cbu6tr.lbr Publish 0.1.0 · Ray
stm32l151cbu6tr.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 49 pins · Ray

STM32L151CBU6TR

STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · VQFN-48-EP(7x7)

STM32L151CBU6TR from STMicroelectronics, in a VQFN-48-EP(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VLCD power_in LCD power supply pin; per footnote 3 it applies to STM32L152 devices only, so on STM32L151 devices it should be connected to VDD.
2 PC13-WKUP2 bidirectional 5 V tolerant (FT) I/O with additional functions RTC_TAMP1, RTC_TS, RTC_OUT and the WKUP2 wake-up input.
3 PC14-OSC32_IN bidirectional Standard 3.3 V (TC) I/O that is used as the OSC32_IN LSE input only when the LSE oscillator is on, otherwise it is a general-purpose PC14.
4 PC15-OSC32_OUT bidirectional Standard 3.3 V (TC) I/O that is used as the OSC32_OUT LSE output only when the LSE oscillator is on, otherwise it is a general-purpose PC15.
5 PH0-OSC_IN bidirectional Standard 3.3 V (TC) I/O that is used as the OSC_IN HSE input only when the HSE oscillator is on, otherwise it is a general-purpose PH0.
6 PH1-OSC_OUT bidirectional Standard 3.3 V (TC) I/O that is used as the OSC_OUT HSE output only when the HSE oscillator is on, otherwise it is a general-purpose PH1.
7 NRST bidirectional Bidirectional active-low reset with embedded weak pull-up (RPU 30 to 60 kΩ); input low level is 0.8 V max and input high level is 1.4 V min.
8 VSSA power_in Analog ground pin that must be connected to VSS.
9 VDDA power_in Analog supply for ADC, reset blocks, RCs and PLL that must equal VDD, with a minimum of 1.8 V when the ADC is used.
10 PA0-WKUP1 bidirectional 5 V tolerant (FT) I/O with alternate functions USART2_CTS and TIM2_CH1_ETR and additional functions WKUP1, ADC_IN0 and COMP1_INP.
11 PA1 bidirectional 5 V tolerant (FT) I/O with alternate functions USART2_RTS and TIM2_CH2 and additional functions ADC_IN1 and COMP1_INP.
12 PA2 bidirectional 5 V tolerant (FT) I/O with alternate functions USART2_TX, TIM2_CH3 and TIM9_CH1 and additional functions ADC_IN2 and COMP1_INP.
13 PA3 bidirectional Standard 3.3 V (TC) I/O with alternate functions USART2_RX, TIM2_CH4 and TIM9_CH2 and additional functions ADC_IN3 and COMP1_INP.
14 PA4 bidirectional Standard 3.3 V (TC) I/O with alternate functions SPI1_NSS and USART2_CK and additional functions ADC_IN4, DAC_OUT1 and COMP1_INP.
15 PA5 bidirectional Standard 3.3 V (TC) I/O with alternate functions SPI1_SCK and TIM2_CH1_ETR and additional functions ADC_IN5, DAC_OUT2 and COMP1_INP.
16 PA6 bidirectional 5 V tolerant (FT) I/O with alternate functions SPI1_MISO, TIM3_CH1 and TIM10_CH1 and additional functions ADC_IN6 and COMP1_INP.
17 PA7 bidirectional 5 V tolerant (FT) I/O with alternate functions SPI1_MOSI, TIM3_CH2 and TIM11_CH1 and additional functions ADC_IN7 and COMP1_INP.
18 PB0 bidirectional Standard 3.3 V (TC) I/O with alternate function TIM3_CH3 and additional functions ADC_IN8, COMP1_INP and VREF_OUT.
19 PB1 bidirectional 5 V tolerant (FT) I/O with alternate function TIM3_CH4 and additional functions ADC_IN9, COMP1_INP and VREF_OUT.
20 PB2 bidirectional 5 V tolerant (FT) I/O that is also the BOOT1 boot-configuration pin.
21 PB10 bidirectional 5 V tolerant (FT) I/O with alternate functions I2C2_SCL, USART3_TX and TIM2_CH3.
22 PB11 bidirectional 5 V tolerant (FT) I/O with alternate functions I2C2_SDA, USART3_RX and TIM2_CH4.
23 VSS_1 power_in Ground pin that must be connected to the external ground supply.
24 VDD_1 power_in Main supply pin for I/Os and the internal regulator, 1.65 V to 3.6 V (1.8 V to 3.6 V when BOR is enabled at power-on).
25 PB12 bidirectional 5 V tolerant (FT) I/O with alternate functions SPI2_NSS, I2C2_SMBA, USART3_CK and TIM10_CH1 and additional functions ADC_IN18 and COMP1_INP.
26 PB13 bidirectional 5 V tolerant (FT) I/O with alternate functions SPI2_SCK, USART3_CTS and TIM9_CH1 and additional functions ADC_IN19 and COMP1_INP.
27 PB14 bidirectional 5 V tolerant (FT) I/O with alternate functions SPI2_MISO, USART3_RTS and TIM9_CH2 and additional functions ADC_IN20 and COMP1_INP.
28 PB15 bidirectional 5 V tolerant (FT) I/O with alternate functions SPI2_MOSI and TIM11_CH1 and additional functions ADC_IN21, COMP1_INP and RTC_REFIN.
29 PA8 bidirectional 5 V tolerant (FT) I/O with alternate functions MCO and USART1_CK.
30 PA9 bidirectional 5 V tolerant (FT) I/O with alternate function USART1_TX.
31 PA10 bidirectional 5 V tolerant (FT) I/O with alternate function USART1_RX.
32 PA11 bidirectional 5 V tolerant (FT) I/O with alternate functions USART1_CTS and SPI1_MISO and additional function USB_DM.
33 PA12 bidirectional 5 V tolerant (FT) I/O with alternate functions USART1_RTS and SPI1_MOSI and additional function USB_DP.
34 PA13 bidirectional 5 V tolerant (FT) I/O whose function after reset is JTMS-SWDIO (serial wire debug data).
35 VSS_2 power_in Ground pin that must be connected to the external ground supply.
36 VDD_2 power_in Main supply pin for I/Os and the internal regulator, 1.65 V to 3.6 V (1.8 V to 3.6 V when BOR is enabled at power-on).
37 PA14 bidirectional 5 V tolerant (FT) I/O whose function after reset is JTCK-SWCLK (serial wire debug clock).
38 PA15 bidirectional 5 V tolerant (FT) I/O whose function after reset is JTDI, with alternate functions TIM2_CH1_ETR and SPI1_NSS.
39 PB3 bidirectional 5 V tolerant (FT) I/O whose function after reset is JTDO, with alternate functions TIM2_CH2 and SPI1_SCK and additional function COMP2_INM.
40 PB4 bidirectional 5 V tolerant (FT) I/O whose function after reset is NJTRST, with alternate functions TIM3_CH1 and SPI1_MISO and additional function COMP2_INP.
41 PB5 bidirectional 5 V tolerant (FT) I/O with alternate functions I2C1_SMBA, TIM3_CH2 and SPI1_MOSI and additional function COMP2_INP.
42 PB6 bidirectional 5 V tolerant (FT) I/O with alternate functions I2C1_SCL, TIM4_CH1 and USART1_TX.
43 PB7 bidirectional 5 V tolerant (FT) I/O with alternate functions I2C1_SDA, TIM4_CH2 and USART1_RX and additional function PVD_IN.
44 BOOT0 input Dedicated BOOT0 boot-mode selection input.
45 PB8 bidirectional 5 V tolerant (FT) I/O with alternate functions TIM4_CH3, I2C1_SCL and TIM10_CH1.
46 PB9 bidirectional 5 V tolerant (FT) I/O with alternate functions TIM4_CH4, I2C1_SDA and TIM11_CH1.
47 VSS_3 power_in Ground pin that must be connected to the external ground supply.
48 VDD_3 power_in Main supply pin for I/Os and the internal regulator, 1.65 V to 3.6 V (1.8 V to 3.6 V when BOR is enabled at power-on).
49 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package VQFN-48-EP(7x7)
Category Embedded Processors & Controllers
Pins 49

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
External main supply voltage (including VDDA and VDD) VDD-VSS -0.3 4 V 52
Input voltage on any other pin VIN 4 V 52
Allowed voltage difference for VREF+ > VDDA VREF+ −VDDA 0.4 V 52
Variations between different VDD power pins /ΔVDDx/ 50 mV 52
Variations between all different ground pins /VSSX −VSS/ 50 mV 52
Total current into VDD/VDDA power lines (source) IVDDΣ 80 mA 52
Total current out of VSS ground lines (sink) IVSSΣ 80 mA 52
Output current sunk by any I/O and control pin IIO 25 mA 52
Output current sourced by any I/O and control pin IIO 25 mA 52
Injected current on five-volt tolerant I/O IINJ(PIN) -5 0 mA 52
Injected current on any other pin IINJ(PIN) -5 5 mA 52
Total injected current (sum of all I/O and control pins) ΣIINJ(PIN) -25 25 mA 52
Storage temperature range TSTG -65 150 °C 53
Maximum junction temperature TJ 150 °C 53
Internal AHB clock frequency fHCLK 0 32 MHz 53
Internal APB1 clock frequency fPCLK1 0 32 MHz 53
Internal APB2 clock frequency fPCLK2 0 32 MHz 53
Standard operating voltage VDD 1.65 3.6 V BOR detector disabled 53
Standard operating voltage VDD 1.8 3.6 V BOR detector enabled, at power on 53
Analog operating voltage VDDA 1.65 3.6 V ADC and DAC not used 53
Analog operating voltage VDDA 1.8 3.6 V ADC or DAC used 53
Input voltage on FT pins VIN -0.3 5.5 V 2.0 V ≤VDD ≤ 3.6 V 53
Input voltage on FT pins VIN -0.3 5.25 V 1.65 V ≤ VDD ≤ 2.0 V 53
Input voltage on BOOT0 pin VIN 0 5.5 V 53
Input voltage on any other pin VIN -0.3 V 53
Temperature range (maximum power dissipation) TA -40 85 °C Maximum power dissipation 53
Temperature range (low power dissipation) TA -40 105 °C Low power dissipation 53
Junction temperature range TJ -40 105 °C -40 °C ≤ TA ≤ 105°C 53
Reset temporization TRSTTEMPO 2 3.3 ms VDD rising, BOR enabled 54
Reset temporization TRSTTEMPO 0.4 0.7 1.6 ms VDD rising, BOR disabled 54
Power on/power down reset threshold VPOR/PDR 1 1.5 1.65 V Falling edge 54
Power on/power down reset threshold VPOR/PDR 1.3 1.5 1.65 V Rising edge 54
Brown-out reset threshold 0 VBOR0 1.67 1.7 1.74 V Falling edge 54
Brown-out reset threshold 0 VBOR0 1.69 1.76 1.8 V Rising edge 54
Brown-out reset threshold 1 VBOR1 1.87 1.93 1.97 V Falling edge 54
Brown-out reset threshold 1 VBOR1 1.96 2.03 2.07 V Rising edge 54
Brown-out reset threshold 2 VBOR2 2.22 2.3 2.35 V Falling edge 54
Brown-out reset threshold 2 VBOR2 2.31 2.41 2.44 V Rising edge 54
Brown-out reset threshold 3 VBOR3 2.45 2.55 2.6 V Falling edge 54
Brown-out reset threshold 3 VBOR3 2.54 2.66 2.7 V Rising edge 54
Brown-out reset threshold 4 VBOR4 2.68 2.8 2.85 V Falling edge 54
Brown-out reset threshold 4 VBOR4 2.78 2.9 2.95 V Rising edge 54
Internal reference voltage VREFINT out 1.202 1.224 1.242 V -40 °C < TJ < +105 °C 56
Temperature coefficient TCoeff 25 100 ppm/°C -40 °C < TJ < +105 °C 56
Supply current in Run mode, code executed from Flash IDD (Run from Flash) 9.6 11 mA Range 1, VCORE=1.8 V VOS[1:0]=01, fHCLK 32 MHz (PLL on); max over 55/85/105 °C 58
Supply current in Stop mode (RTC disabled) IDD (Stop) 0.5 0.9 µA Regulator in LP mode, LSI, HSI and HSE OFF (no independent watchdog), TA = -40 °C to 25 °C 65
Supply current in Standby mode with RTC disabled IDD (Standby) 0.3 0.55 µA Independent watchdog and LSI OFF, TA = -40 °C to 25 °C 66
Supply current in Standby mode with RTC disabled IDD (Standby) 2.5 4 µA Independent watchdog and LSI OFF, TA = 105 °C 66
Oscillator frequency (HSE) fOSC_IN 1 24 MHz 72
Accuracy of the factory-calibrated HSI oscillator ACCHSI -4 3 % VDDA = 1.65 V to 3.6 V, TA = -40 to 105 °C 75
LSI frequency fLSI 26 38 56 kHz 75
LSI oscillator frequency drift DLSI -10 4 % 0 °C ≤ TA ≤ 85 °C 75
Frequency error after factory calibration (MSI) ACCMSI -0.5 0.5 % 76
PLL input clock fPLL_IN 2 24 MHz 77
PLL output clock fPLL_OUT 2 32 MHz 77
Current consumption on VDDA (PLL) IDDA(PLL) 220 450 µA 77
Current consumption on VDD (PLL) IDD(PLL) 120 150 µA 77
NRST input low level voltage VIL(NRST) 0.8 V 85
Weak pull-up equivalent resistor RPU 30 45 60 kΩ VIN = VSS 85

CAD (KiCad official)

  • Symbol: STM32L151CBU6TR
  • Footprint: Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm
  • 3D model: VQFN-48-EP(7x7), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.55 mm tall, datasheet A, nominal). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: stm32l151cbu6tr-etched.step / stm32l151cbu6tr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm32l151cbu6tr.step / stm32l151cbu6tr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (133 pp, sha256 5223296de36fe904, retrieved 2026-11-10, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF