component
STM32L151C6T6ATR
Public Made by Adomby adom
STMicroelectronics ST Microelectronics, LQFP-48(7x7). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.
main
Ray
Publish 0.1.0
608294d
STM32L151C6T6ATR
STMicroelectronics · ST Microelectronics · LQFP-48(7x7)
STM32L151C6T6ATR from STMicroelectronics, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VLCD | power_in | LCD power supply pin; the datasheet states it applies to STM32L152xxxxA devices only and that on STM32L151xxxxA devices it should be connected to VDD. |
| 2 | PC13-WKUP2 | bidirectional | 5 V tolerant (FT) I/O with additional functions RTC_TAMP1, RTC_TS, RTC_OUT and WKUP2 wakeup input. |
| 3 | PC14-OSC32_IN | bidirectional | Standard 3.3 V I/O that is configured as OSC32_IN only when the LSE oscillator is on (LSEON bit), otherwise it is general-purpose PC14. |
| 4 | PC15-OSC32_OUT | bidirectional | Standard 3.3 V I/O that is configured as OSC32_OUT only when the LSE oscillator is on (LSEON bit), otherwise it is general-purpose PC15. |
| 5 | PH0-OSC_IN | bidirectional | Standard 3.3 V I/O that is configured as OSC_IN only when the HSE oscillator is on (HSEON bit), otherwise it is general-purpose PH0. |
| 6 | PH1-OSC_OUT | bidirectional | Standard 3.3 V I/O that is configured as OSC_OUT only when the HSE oscillator is on (HSEON bit), otherwise it is general-purpose PH1. |
| 7 | NRST | bidirectional | Bidirectional reset pin with an embedded weak pull-up resistor. |
| 8 | VSSA | power_in | Analog ground pin. |
| 9 | VDDA | power_in | Analog power supply pin. |
| 10 | PA0-WKUP1 | bidirectional | 5 V tolerant (FT) I/O with alternate functions USART2_CTS and TIM2_CH1_ETR and additional functions WKUP1, ADC_IN0, COMP1_INP and RTC_TAMP2. |
| 11 | PA1 | bidirectional | 5 V tolerant (FT) I/O with alternate functions USART2_RTS, TIM2_CH2 and LCD_SEG0 and additional functions ADC_IN1 and COMP1_INP. |
| 12 | PA2 | bidirectional | 5 V tolerant (FT) I/O with alternate functions USART2_TX, TIM2_CH3, TIM9_CH1 and LCD_SEG1 and additional functions ADC_IN2 and COMP1_INP. |
| 13 | PA3 | bidirectional | Standard 3.3 V I/O with alternate functions USART2_RX, TIM2_CH4, TIM9_CH2 and LCD_SEG2 and additional functions ADC_IN3 and COMP1_INP. |
| 14 | PA4 | bidirectional | Standard 3.3 V I/O with alternate functions SPI1_NSS and USART2_CK and additional functions ADC_IN4, DAC_OUT1 and COMP1_INP. |
| 15 | PA5 | bidirectional | Standard 3.3 V I/O with alternate functions SPI1_SCK and TIM2_CH1_ETR and additional functions ADC_IN5, DAC_OUT2 and COMP1_INP. |
| 16 | PA6 | bidirectional | 5 V tolerant (FT) I/O with alternate functions SPI1_MISO, TIM3_CH1, LCD_SEG3 and TIM10_CH1 and additional functions ADC_IN6 and COMP1_INP. |
| 17 | PA7 | bidirectional | 5 V tolerant (FT) I/O with alternate functions SPI1_MOSI, TIM3_CH2, LCD_SEG4 and TIM11_CH1 and additional functions ADC_IN7 and COMP1_INP. |
| 18 | PB0 | bidirectional | Standard 3.3 V I/O with alternate functions TIM3_CH3 and LCD_SEG5 and additional functions ADC_IN8, COMP1_INP, VREF_OUT and VLCDRAIL3. |
| 19 | PB1 | bidirectional | 5 V tolerant (FT) I/O with alternate functions TIM3_CH4 and LCD_SEG6 and additional functions ADC_IN9, COMP1_INP and VREF_OUT. |
| 20 | PB2/BOOT1 | bidirectional | 5 V tolerant (FT) I/O that doubles as the BOOT1 boot-mode pin and additionally provides VLCDRAIL1. |
| 21 | PB10 | bidirectional | 5 V tolerant (FT) I/O with alternate functions I2C2_SCL, USART3_TX, TIM2_CH3 and LCD_SEG10. |
| 22 | PB11 | bidirectional | 5 V tolerant (FT) I/O with alternate functions I2C2_SDA, USART3_RX, TIM2_CH4 and LCD_SEG11. |
| 23 | VSS_1 | power_in | Digital ground pin. |
| 24 | VDD_1 | power_in | Digital power supply pin. |
| 25 | PB12 | bidirectional | 5 V tolerant (FT) I/O with alternate functions SPI2_NSS, I2C2_SMBA, USART3_CK, LCD_SEG12 and TIM10_CH1 and additional functions ADC_IN18, COMP1_INP and VLCDRAIL2. |
| 26 | PB13 | bidirectional | 5 V tolerant (FT) I/O with alternate functions SPI2_SCK, USART3_CTS, LCD_SEG13 and TIM9_CH1 and additional functions ADC_IN19 and COMP1_INP. |
| 27 | PB14 | bidirectional | 5 V tolerant (FT) I/O with alternate functions SPI2_MISO, USART3_RTS, LCD_SEG14 and TIM9_CH2 and additional functions ADC_IN20 and COMP1_INP. |
| 28 | PB15 | bidirectional | 5 V tolerant (FT) I/O with alternate functions SPI2_MOSI, LCD_SEG15 and TIM11_CH1 and additional functions ADC_IN21, COMP1_INP and RTC_REFIN. |
| 29 | PA8 | bidirectional | 5 V tolerant (FT) I/O with alternate functions USART1_CK, MCO and LCD_COM0. |
| 30 | PA9 | bidirectional | 5 V tolerant (FT) I/O with alternate functions USART1_TX and LCD_COM1. |
| 31 | PA10 | bidirectional | 5 V tolerant (FT) I/O with alternate functions USART1_RX and LCD_COM2. |
| 32 | PA11 | bidirectional | 5 V tolerant (FT) I/O with alternate functions USART1_CTS and SPI1_MISO and additional function USB_DM. |
| 33 | PA12 | bidirectional | 5 V tolerant (FT) I/O with alternate functions USART1_RTS and SPI1_MOSI and additional function USB_DP. |
| 34 | PA13 | bidirectional | 5 V tolerant (FT) I/O whose alternate function is JTMS-SWDIO (serial wire debug data). |
| 35 | VSS_2 | power_in | Digital ground pin. |
| 36 | VDD_2 | power_in | Digital power supply pin. |
| 37 | PA14 | bidirectional | 5 V tolerant (FT) I/O whose alternate function is JTCK-SWCLK (serial wire debug clock). |
| 38 | PA15 | bidirectional | 5 V tolerant (FT) I/O with alternate functions JTDI, TIM2_CH1_ETR, SPI1_NSS and LCD_SEG17. |
| 39 | PB3 | bidirectional | 5 V tolerant (FT) I/O with alternate functions JTDO, TIM2_CH2, SPI1_SCK and LCD_SEG7 and additional function COMP2_INM. |
| 40 | PB4 | bidirectional | 5 V tolerant (FT) I/O with alternate functions NJTRST, TIM3_CH1, SPI1_MISO and LCD_SEG8 and additional function COMP2_INP. |
| 41 | PB5 | bidirectional | 5 V tolerant (FT) I/O with alternate functions I2C1_SMBA, TIM3_CH2, SPI1_MOSI and LCD_SEG9 and additional function COMP2_INP. |
| 42 | PB6 | bidirectional | 5 V tolerant (FT) I/O with alternate functions I2C1_SCL, TIM4_CH1 and USART1_TX. |
| 43 | PB7 | bidirectional | 5 V tolerant (FT) I/O with alternate functions I2C1_SDA, TIM4_CH2 and USART1_RX and additional function PVD_IN. |
| 44 | BOOT0 | input | Dedicated BOOT0 boot-mode selection input pin. |
| 45 | PB8 | bidirectional | 5 V tolerant (FT) I/O with alternate functions TIM4_CH3, I2C1_SCL, LCD_SEG16 and TIM10_CH1. |
| 46 | PB9 | bidirectional | 5 V tolerant (FT) I/O with alternate functions TIM4_CH4, I2C1_SDA, LCD_COM3 and TIM11_CH1. |
| 47 | VSS_3 | power_in | Digital ground pin. |
| 48 | VDD_3 | power_in | Digital power supply pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LQFP-48(7x7) |
| Category | Embedded Processors & Controllers |
| Pins | 48 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| External main supply voltage (including VDDA and VDD) | VDD-VSS | -0.3 | 4 | V | 55 | ||
| Variations between different VDD power pins | /ΔVDDx/ | 50 | mV | 55 | |||
| Variations between all different ground pins (includes VREF-) | /VSSX −VSS/ | 50 | mV | 55 | |||
| Allowed voltage difference for VREF+ > VDDA | VREF+ −VDDA | 0.4 | V | VREF+ > VDDA | 55 | ||
| Total current into sum of all VDD_x power lines (source) | ΣIVDD | 100 | mA | 55 | |||
| Total current out of sum of all VSS_x ground lines (sink) | ΣIVSS | 100 | mA | 55 | |||
| Maximum current into each VDD_x power pin (source) | IVDD(PIN) | 70 | mA | 55 | |||
| Maximum current out of each VSS_x ground pin (sink) | IVSS(PIN) | -70 | mA | 55 | |||
| Output current sunk by any I/O and control pin | IIO | 25 | mA | 55 | |||
| Output current sourced by any I/O and control pin | IIO | -25 | mA | 55 | |||
| Total output current sunk by sum of all IOs and control pins | ΣIIO(PIN) | 60 | mA | 55 | |||
| Total output current sourced by sum of all IOs and control pins | ΣIIO(PIN) | -60 | mA | 55 | |||
| Injected current on five-volt tolerant I/O, RST and B pins | IINJ(PIN) | -5 | 0 | mA | Five-volt tolerant I/O, RST and B pins | 55 | |
| Injected current on any other pin | IINJ(PIN) | -5 | 5 | mA | Any other pin | 55 | |
| Total injected current (sum of all I/O and control pins) | ΣIINJ(PIN) | -25 | 25 | mA | 55 | ||
| Storage temperature range | TSTG | -65 | 150 | °C | 56 | ||
| Maximum junction temperature | TJ | 150 | °C | 56 | |||
| Internal AHB clock frequency | fHCLK | 0 | 32 | MHz | 56 | ||
| Internal APB1 clock frequency | fPCLK1 | 0 | 32 | MHz | 56 | ||
| Internal APB2 clock frequency | fPCLK2 | 0 | 32 | MHz | 56 | ||
| Standard operating voltage | VDD | 1.65 | 3.6 | V | BOR detector disabled | 56 | |
| Standard operating voltage | VDD | 1.8 | 3.6 | V | BOR detector enabled, at power on | 56 | |
| Analog operating voltage | VDDA | 1.65 | 3.6 | V | ADC and DAC not used | 56 | |
| Analog operating voltage | VDDA | 1.8 | 3.6 | V | ADC or DAC used | 56 | |
| I/O input voltage, FT pins | VIN | -0.3 | 5.5 | V | FT pins, 2.0 V ≤ VDD | 56 | |
| I/O input voltage, FT pins | VIN | -0.3 | 5.25 | V | FT pins, VDD < 2.0 V | 56 | |
| I/O input voltage, BOOT0 | VIN | 0 | 5.5 | V | BOOT0 | 56 | |
| I/O input voltage, any other pin | VIN | -0.3 | V | Any other pin (max printed as VDD+0.3) | 56 | ||
| Power dissipation, LQFP48 package | PD | 364 | mW | TA = 85 °C for suffix 6 | 57 | ||
| Ambient temperature for 6 suffix version | TA | -40 | 85 | °C | Maximum power dissipation | 57 | |
| Junction temperature range 6 suffix version | TJ | -40 | 105 | °C | 57 | ||
| Power on/power down reset threshold (VPOR/PDR) | VPOR/PDR | 1 | 1.5 | 1.65 | V | Falling edge | 57 |
| Power on/power down reset threshold (VPOR/PDR) | VPOR/PDR | 1.3 | 1.5 | 1.65 | V | Rising edge | 57 |
| Brown-out reset threshold 0 | VBOR0 | 1.67 | 1.7 | 1.74 | V | Falling edge | 58 |
| Brown-out reset threshold 0 | VBOR0 | 1.69 | 1.76 | 1.8 | V | Rising edge | 58 |
| Brown-out reset threshold 1 | VBOR1 | 1.87 | 1.93 | 1.97 | V | Falling edge | 58 |
| Brown-out reset threshold 1 | VBOR1 | 1.96 | 2.03 | 2.07 | V | Rising edge | 58 |
| Brown-out reset threshold 2 | VBOR2 | 2.22 | 2.3 | 2.35 | V | Falling edge | 58 |
| Brown-out reset threshold 2 | VBOR2 | 2.31 | 2.41 | 2.44 | V | Rising edge | 58 |
| Brown-out reset threshold 3 | VBOR3 | 2.45 | 2.55 | 2.6 | V | Falling edge | 58 |
| Brown-out reset threshold 3 | VBOR3 | 2.54 | 2.66 | 2.7 | V | Rising edge | 58 |
| Brown-out reset threshold 4 | VBOR4 | 2.68 | 2.8 | 2.85 | V | Falling edge | 58 |
| Brown-out reset threshold 4 | VBOR4 | 2.78 | 2.9 | 2.95 | V | Rising edge | 58 |
| Internal reference voltage | VREFINT out | 1.202 | 1.224 | 1.242 | V | -40 °C < TJ < +110 °C | 59 |
| VDDA and VREF+ voltage during VREFINT factory measure | VVREF_MEAS | 2.99 | 3 | 3.01 | V | 59 | |
| Internal reference current consumption | IREFINT | 1.4 | 2.3 | µA | 59 | ||
| Temperature coefficient | TCoeff | 25 | 100 | ppm/°C | -40 °C < TJ < +110 °C | 59 | |
| Long-term stability | ACoeff | 1000 | ppm | 1000 hours, T= 25 °C | 59 | ||
| Voltage coefficient | VDDCoeff | 2000 | ppm/V | 3.0 V < VDDA < 3.6 V | 59 | ||
| Accuracy of the factory-calibrated HSI oscillator | ACCHSI | -4 | 3 | % | VDDA = 1.65 V to 3.6 V, TA = -40 to 105 °C | 77 | |
| Accuracy of the factory-calibrated HSI oscillator | ACCHSI | -1.5 | 1.5 | % | VDDA = 3.0 V, TA = 0 to 55 °C | 77 | |
| LSI frequency | fLSI | 26 | 38 | 56 | kHz | 77 | |
| LSI oscillator frequency drift | DLSI | -10 | 4 | % | 0°C ≤ TA ≤ 85°C | 77 | |
| Frequency error after factory calibration | ACCMSI | -0.5 | 0.5 | % | 78 | ||
| PLL input clock | fPLL_IN | 2 | 24 | MHz | 79 | ||
| PLL output clock | fPLL_OUT | 2 | 32 | MHz | 79 | ||
| Oscillator frequency (HSE) | fOSC_IN | 1 | 24 | MHz | 73 | ||
| Output low level voltage for an I/O pin | VOL | 0.4 | V | IIO = 8 mA, 2.7 V < VDD < 3.6 V | 85 | ||
| Cycling (erase / write), program memory | NCYC | 10 | kcycles | TA = -40 °C to 105 °C | 80 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | TLEAD Maximum lead temperature during soldering see note (1) 1. Compliant with JEDEC Std J-STD-020D (for small body, Sn-Pb or Pb assembly), the ST ECOPACK® | 56 |
CAD (KiCad official)
- Symbol:
STM32L151C6T6ATR - Footprint:
Package_QFP:LQFP-48_7x7mm_P0.5mm - 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
- 3D model files:
stm32l151c6t6atr-etched.step/stm32l151c6t6atr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32l151c6t6atr.step/stm32l151c6t6atr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (130 pp, sha256
e5e0ab791f4e7879, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# STM32L151C6T6ATR
**STMicroelectronics** · ST Microelectronics · LQFP-48(7x7)
STM32L151C6T6ATR from STMicroelectronics, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VLCD | power_in | LCD power supply pin; the datasheet states it applies to STM32L152xxxxA devices only and that on STM32L151xxxxA devices it should be connected to VDD. |
| 2 | PC13-WKUP2 | bidirectional | 5 V tolerant (FT) I/O with additional functions RTC_TAMP1, RTC_TS, RTC_OUT and WKUP2 wakeup input. |
| 3 | PC14-OSC32_IN | bidirectional | Standard 3.3 V I/O that is configured as OSC32_IN only when the LSE oscillator is on (LSEON bit), otherwise it is general-purpose PC14. |
| 4 | PC15-OSC32_OUT | bidirectional | Standard 3.3 V I/O that is configured as OSC32_OUT only when the LSE oscillator is on (LSEON bit), otherwise it is general-purpose PC15. |
| 5 | PH0-OSC_IN | bidirectional | Standard 3.3 V I/O that is configured as OSC_IN only when the HSE oscillator is on (HSEON bit), otherwise it is general-purpose PH0. |
| 6 | PH1-OSC_OUT | bidirectional | Standard 3.3 V I/O that is configured as OSC_OUT only when the HSE oscillator is on (HSEON bit), otherwise it is general-purpose PH1. |
| 7 | NRST | bidirectional | Bidirectional reset pin with an embedded weak pull-up resistor. |
| 8 | VSSA | power_in | Analog ground pin. |
| 9 | VDDA | power_in | Analog power supply pin. |
| 10 | PA0-WKUP1 | bidirectional | 5 V tolerant (FT) I/O with alternate functions USART2_CTS and TIM2_CH1_ETR and additional functions WKUP1, ADC_IN0, COMP1_INP and RTC_TAMP2. |
| 11 | PA1 | bidirectional | 5 V tolerant (FT) I/O with alternate functions USART2_RTS, TIM2_CH2 and LCD_SEG0 and additional functions ADC_IN1 and COMP1_INP. |
| 12 | PA2 | bidirectional | 5 V tolerant (FT) I/O with alternate functions USART2_TX, TIM2_CH3, TIM9_CH1 and LCD_SEG1 and additional functions ADC_IN2 and COMP1_INP. |
| 13 | PA3 | bidirectional | Standard 3.3 V I/O with alternate functions USART2_RX, TIM2_CH4, TIM9_CH2 and LCD_SEG2 and additional functions ADC_IN3 and COMP1_INP. |
| 14 | PA4 | bidirectional | Standard 3.3 V I/O with alternate functions SPI1_NSS and USART2_CK and additional functions ADC_IN4, DAC_OUT1 and COMP1_INP. |
| 15 | PA5 | bidirectional | Standard 3.3 V I/O with alternate functions SPI1_SCK and TIM2_CH1_ETR and additional functions ADC_IN5, DAC_OUT2 and COMP1_INP. |
| 16 | PA6 | bidirectional | 5 V tolerant (FT) I/O with alternate functions SPI1_MISO, TIM3_CH1, LCD_SEG3 and TIM10_CH1 and additional functions ADC_IN6 and COMP1_INP. |
| 17 | PA7 | bidirectional | 5 V tolerant (FT) I/O with alternate functions SPI1_MOSI, TIM3_CH2, LCD_SEG4 and TIM11_CH1 and additional functions ADC_IN7 and COMP1_INP. |
| 18 | PB0 | bidirectional | Standard 3.3 V I/O with alternate functions TIM3_CH3 and LCD_SEG5 and additional functions ADC_IN8, COMP1_INP, VREF_OUT and VLCDRAIL3. |
| 19 | PB1 | bidirectional | 5 V tolerant (FT) I/O with alternate functions TIM3_CH4 and LCD_SEG6 and additional functions ADC_IN9, COMP1_INP and VREF_OUT. |
| 20 | PB2/BOOT1 | bidirectional | 5 V tolerant (FT) I/O that doubles as the BOOT1 boot-mode pin and additionally provides VLCDRAIL1. |
| 21 | PB10 | bidirectional | 5 V tolerant (FT) I/O with alternate functions I2C2_SCL, USART3_TX, TIM2_CH3 and LCD_SEG10. |
| 22 | PB11 | bidirectional | 5 V tolerant (FT) I/O with alternate functions I2C2_SDA, USART3_RX, TIM2_CH4 and LCD_SEG11. |
| 23 | VSS_1 | power_in | Digital ground pin. |
| 24 | VDD_1 | power_in | Digital power supply pin. |
| 25 | PB12 | bidirectional | 5 V tolerant (FT) I/O with alternate functions SPI2_NSS, I2C2_SMBA, USART3_CK, LCD_SEG12 and TIM10_CH1 and additional functions ADC_IN18, COMP1_INP and VLCDRAIL2. |
| 26 | PB13 | bidirectional | 5 V tolerant (FT) I/O with alternate functions SPI2_SCK, USART3_CTS, LCD_SEG13 and TIM9_CH1 and additional functions ADC_IN19 and COMP1_INP. |
| 27 | PB14 | bidirectional | 5 V tolerant (FT) I/O with alternate functions SPI2_MISO, USART3_RTS, LCD_SEG14 and TIM9_CH2 and additional functions ADC_IN20 and COMP1_INP. |
| 28 | PB15 | bidirectional | 5 V tolerant (FT) I/O with alternate functions SPI2_MOSI, LCD_SEG15 and TIM11_CH1 and additional functions ADC_IN21, COMP1_INP and RTC_REFIN. |
| 29 | PA8 | bidirectional | 5 V tolerant (FT) I/O with alternate functions USART1_CK, MCO and LCD_COM0. |
| 30 | PA9 | bidirectional | 5 V tolerant (FT) I/O with alternate functions USART1_TX and LCD_COM1. |
| 31 | PA10 | bidirectional | 5 V tolerant (FT) I/O with alternate functions USART1_RX and LCD_COM2. |
| 32 | PA11 | bidirectional | 5 V tolerant (FT) I/O with alternate functions USART1_CTS and SPI1_MISO and additional function USB_DM. |
| 33 | PA12 | bidirectional | 5 V tolerant (FT) I/O with alternate functions USART1_RTS and SPI1_MOSI and additional function USB_DP. |
| 34 | PA13 | bidirectional | 5 V tolerant (FT) I/O whose alternate function is JTMS-SWDIO (serial wire debug data). |
| 35 | VSS_2 | power_in | Digital ground pin. |
| 36 | VDD_2 | power_in | Digital power supply pin. |
| 37 | PA14 | bidirectional | 5 V tolerant (FT) I/O whose alternate function is JTCK-SWCLK (serial wire debug clock). |
| 38 | PA15 | bidirectional | 5 V tolerant (FT) I/O with alternate functions JTDI, TIM2_CH1_ETR, SPI1_NSS and LCD_SEG17. |
| 39 | PB3 | bidirectional | 5 V tolerant (FT) I/O with alternate functions JTDO, TIM2_CH2, SPI1_SCK and LCD_SEG7 and additional function COMP2_INM. |
| 40 | PB4 | bidirectional | 5 V tolerant (FT) I/O with alternate functions NJTRST, TIM3_CH1, SPI1_MISO and LCD_SEG8 and additional function COMP2_INP. |
| 41 | PB5 | bidirectional | 5 V tolerant (FT) I/O with alternate functions I2C1_SMBA, TIM3_CH2, SPI1_MOSI and LCD_SEG9 and additional function COMP2_INP. |
| 42 | PB6 | bidirectional | 5 V tolerant (FT) I/O with alternate functions I2C1_SCL, TIM4_CH1 and USART1_TX. |
| 43 | PB7 | bidirectional | 5 V tolerant (FT) I/O with alternate functions I2C1_SDA, TIM4_CH2 and USART1_RX and additional function PVD_IN. |
| 44 | BOOT0 | input | Dedicated BOOT0 boot-mode selection input pin. |
| 45 | PB8 | bidirectional | 5 V tolerant (FT) I/O with alternate functions TIM4_CH3, I2C1_SCL, LCD_SEG16 and TIM10_CH1. |
| 46 | PB9 | bidirectional | 5 V tolerant (FT) I/O with alternate functions TIM4_CH4, I2C1_SDA, LCD_COM3 and TIM11_CH1. |
| 47 | VSS_3 | power_in | Digital ground pin. |
| 48 | VDD_3 | power_in | Digital power supply pin. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LQFP-48(7x7) |
| Category | Embedded Processors & Controllers |
| Pins | 48 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| External main supply voltage (including VDDA and VDD) | VDD-VSS | -0.3 | | 4 | V | | 55 |
| Variations between different VDD power pins | /ΔVDDx/ | | | 50 | mV | | 55 |
| Variations between all different ground pins (includes VREF-) | /VSSX −VSS/ | | | 50 | mV | | 55 |
| Allowed voltage difference for VREF+ > VDDA | VREF+ −VDDA | | | 0.4 | V | VREF+ > VDDA | 55 |
| Total current into sum of all VDD_x power lines (source) | ΣIVDD | | | 100 | mA | | 55 |
| Total current out of sum of all VSS_x ground lines (sink) | ΣIVSS | | | 100 | mA | | 55 |
| Maximum current into each VDD_x power pin (source) | IVDD(PIN) | | | 70 | mA | | 55 |
| Maximum current out of each VSS_x ground pin (sink) | IVSS(PIN) | | | -70 | mA | | 55 |
| Output current sunk by any I/O and control pin | IIO | | | 25 | mA | | 55 |
| Output current sourced by any I/O and control pin | IIO | | | -25 | mA | | 55 |
| Total output current sunk by sum of all IOs and control pins | ΣIIO(PIN) | | | 60 | mA | | 55 |
| Total output current sourced by sum of all IOs and control pins | ΣIIO(PIN) | | | -60 | mA | | 55 |
| Injected current on five-volt tolerant I/O, RST and B pins | IINJ(PIN) | -5 | | 0 | mA | Five-volt tolerant I/O, RST and B pins | 55 |
| Injected current on any other pin | IINJ(PIN) | -5 | | 5 | mA | Any other pin | 55 |
| Total injected current (sum of all I/O and control pins) | ΣIINJ(PIN) | -25 | | 25 | mA | | 55 |
| Storage temperature range | TSTG | -65 | | 150 | °C | | 56 |
| Maximum junction temperature | TJ | | | 150 | °C | | 56 |
| Internal AHB clock frequency | fHCLK | 0 | | 32 | MHz | | 56 |
| Internal APB1 clock frequency | fPCLK1 | 0 | | 32 | MHz | | 56 |
| Internal APB2 clock frequency | fPCLK2 | 0 | | 32 | MHz | | 56 |
| Standard operating voltage | VDD | 1.65 | | 3.6 | V | BOR detector disabled | 56 |
| Standard operating voltage | VDD | 1.8 | | 3.6 | V | BOR detector enabled, at power on | 56 |
| Analog operating voltage | VDDA | 1.65 | | 3.6 | V | ADC and DAC not used | 56 |
| Analog operating voltage | VDDA | 1.8 | | 3.6 | V | ADC or DAC used | 56 |
| I/O input voltage, FT pins | VIN | -0.3 | | 5.5 | V | FT pins, 2.0 V ≤ VDD | 56 |
| I/O input voltage, FT pins | VIN | -0.3 | | 5.25 | V | FT pins, VDD < 2.0 V | 56 |
| I/O input voltage, BOOT0 | VIN | 0 | | 5.5 | V | BOOT0 | 56 |
| I/O input voltage, any other pin | VIN | -0.3 | | | V | Any other pin (max printed as VDD+0.3) | 56 |
| Power dissipation, LQFP48 package | PD | | | 364 | mW | TA = 85 °C for suffix 6 | 57 |
| Ambient temperature for 6 suffix version | TA | -40 | | 85 | °C | Maximum power dissipation | 57 |
| Junction temperature range 6 suffix version | TJ | -40 | | 105 | °C | | 57 |
| Power on/power down reset threshold (VPOR/PDR) | VPOR/PDR | 1 | 1.5 | 1.65 | V | Falling edge | 57 |
| Power on/power down reset threshold (VPOR/PDR) | VPOR/PDR | 1.3 | 1.5 | 1.65 | V | Rising edge | 57 |
| Brown-out reset threshold 0 | VBOR0 | 1.67 | 1.7 | 1.74 | V | Falling edge | 58 |
| Brown-out reset threshold 0 | VBOR0 | 1.69 | 1.76 | 1.8 | V | Rising edge | 58 |
| Brown-out reset threshold 1 | VBOR1 | 1.87 | 1.93 | 1.97 | V | Falling edge | 58 |
| Brown-out reset threshold 1 | VBOR1 | 1.96 | 2.03 | 2.07 | V | Rising edge | 58 |
| Brown-out reset threshold 2 | VBOR2 | 2.22 | 2.3 | 2.35 | V | Falling edge | 58 |
| Brown-out reset threshold 2 | VBOR2 | 2.31 | 2.41 | 2.44 | V | Rising edge | 58 |
| Brown-out reset threshold 3 | VBOR3 | 2.45 | 2.55 | 2.6 | V | Falling edge | 58 |
| Brown-out reset threshold 3 | VBOR3 | 2.54 | 2.66 | 2.7 | V | Rising edge | 58 |
| Brown-out reset threshold 4 | VBOR4 | 2.68 | 2.8 | 2.85 | V | Falling edge | 58 |
| Brown-out reset threshold 4 | VBOR4 | 2.78 | 2.9 | 2.95 | V | Rising edge | 58 |
| Internal reference voltage | VREFINT out | 1.202 | 1.224 | 1.242 | V | -40 °C < TJ < +110 °C | 59 |
| VDDA and VREF+ voltage during VREFINT factory measure | VVREF_MEAS | 2.99 | 3 | 3.01 | V | | 59 |
| Internal reference current consumption | IREFINT | | 1.4 | 2.3 | µA | | 59 |
| Temperature coefficient | TCoeff | | 25 | 100 | ppm/°C | -40 °C < TJ < +110 °C | 59 |
| Long-term stability | ACoeff | | | 1000 | ppm | 1000 hours, T= 25 °C | 59 |
| Voltage coefficient | VDDCoeff | | | 2000 | ppm/V | 3.0 V < VDDA < 3.6 V | 59 |
| Accuracy of the factory-calibrated HSI oscillator | ACCHSI | -4 | | 3 | % | VDDA = 1.65 V to 3.6 V, TA = -40 to 105 °C | 77 |
| Accuracy of the factory-calibrated HSI oscillator | ACCHSI | -1.5 | | 1.5 | % | VDDA = 3.0 V, TA = 0 to 55 °C | 77 |
| LSI frequency | fLSI | 26 | 38 | 56 | kHz | | 77 |
| LSI oscillator frequency drift | DLSI | -10 | | 4 | % | 0°C ≤ TA ≤ 85°C | 77 |
| Frequency error after factory calibration | ACCMSI | -0.5 | | 0.5 | % | | 78 |
| PLL input clock | fPLL_IN | 2 | | 24 | MHz | | 79 |
| PLL output clock | fPLL_OUT | 2 | | 32 | MHz | | 79 |
| Oscillator frequency (HSE) | fOSC_IN | 1 | | 24 | MHz | | 73 |
| Output low level voltage for an I/O pin | VOL | | | 0.4 | V | IIO = 8 mA, 2.7 V < VDD < 3.6 V | 85 |
| Cycling (erase / write), program memory | NCYC | 10 | | | kcycles | TA = -40 °C to 105 °C | 80 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | | tin | TLEAD Maximum lead temperature during soldering see note (1) 1. Compliant with JEDEC Std J-STD-020D (for small body, Sn-Pb or Pb assembly), the ST ECOPACK® | 56 |
## CAD (KiCad official)
- Symbol: `STM32L151C6T6ATR`
- Footprint: `Package_QFP:LQFP-48_7x7mm_P0.5mm`
- 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
- 3D model files: `stm32l151c6t6atr-etched.step` / `stm32l151c6t6atr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32l151c6t6atr.step` / `stm32l151c6t6atr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [STMicroelectronics datasheet](https://www.st.com/content/ccc/resource/technical/document/datasheet/81/27/7d/29/b7/bd/49/f0/DM00078689.pdf/files/DM00078689.pdf/jcr:content/translations/en.DM00078689.pdf) (130 pp, sha256 `e5e0ab791f4e7879`, retrieved 2026-11-13, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/stm32l151c6t6atr-datasheet.pdf)