main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers stm32l151c6t6atr: viewers · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
stm32l151c6t6atr-etched.glb stm32l151c6t6atr: factory component page (tier=mfr) · Ray
stm32l151c6t6atr-etched.step stm32l151c6t6atr: factory component page (tier=mfr) · Ray
stm32l151c6t6atr-hero.glb stm32l151c6t6atr: hero GLB from the etched model (keeps the MPN mark) · Ray
stm32l151c6t6atr-hero.overlay.json stm32l151c6t6atr: hero GLB from the etched model (keeps the MPN mark) · Ray
stm32l151c6t6atr.glb Publish 0.1.0 · Ray
stm32l151c6t6atr.kicad_mod Publish 0.1.0 · Ray
stm32l151c6t6atr.kicad_sym Publish 0.1.0 · Ray
stm32l151c6t6atr.lbr Publish 0.1.0 · Ray
stm32l151c6t6atr.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 48 pins · Ray

STM32L151C6T6ATR

STMicroelectronics · ST Microelectronics · LQFP-48(7x7)

STM32L151C6T6ATR from STMicroelectronics, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VLCD power_in LCD power supply pin; the datasheet states it applies to STM32L152xxxxA devices only and that on STM32L151xxxxA devices it should be connected to VDD.
2 PC13-WKUP2 bidirectional 5 V tolerant (FT) I/O with additional functions RTC_TAMP1, RTC_TS, RTC_OUT and WKUP2 wakeup input.
3 PC14-OSC32_IN bidirectional Standard 3.3 V I/O that is configured as OSC32_IN only when the LSE oscillator is on (LSEON bit), otherwise it is general-purpose PC14.
4 PC15-OSC32_OUT bidirectional Standard 3.3 V I/O that is configured as OSC32_OUT only when the LSE oscillator is on (LSEON bit), otherwise it is general-purpose PC15.
5 PH0-OSC_IN bidirectional Standard 3.3 V I/O that is configured as OSC_IN only when the HSE oscillator is on (HSEON bit), otherwise it is general-purpose PH0.
6 PH1-OSC_OUT bidirectional Standard 3.3 V I/O that is configured as OSC_OUT only when the HSE oscillator is on (HSEON bit), otherwise it is general-purpose PH1.
7 NRST bidirectional Bidirectional reset pin with an embedded weak pull-up resistor.
8 VSSA power_in Analog ground pin.
9 VDDA power_in Analog power supply pin.
10 PA0-WKUP1 bidirectional 5 V tolerant (FT) I/O with alternate functions USART2_CTS and TIM2_CH1_ETR and additional functions WKUP1, ADC_IN0, COMP1_INP and RTC_TAMP2.
11 PA1 bidirectional 5 V tolerant (FT) I/O with alternate functions USART2_RTS, TIM2_CH2 and LCD_SEG0 and additional functions ADC_IN1 and COMP1_INP.
12 PA2 bidirectional 5 V tolerant (FT) I/O with alternate functions USART2_TX, TIM2_CH3, TIM9_CH1 and LCD_SEG1 and additional functions ADC_IN2 and COMP1_INP.
13 PA3 bidirectional Standard 3.3 V I/O with alternate functions USART2_RX, TIM2_CH4, TIM9_CH2 and LCD_SEG2 and additional functions ADC_IN3 and COMP1_INP.
14 PA4 bidirectional Standard 3.3 V I/O with alternate functions SPI1_NSS and USART2_CK and additional functions ADC_IN4, DAC_OUT1 and COMP1_INP.
15 PA5 bidirectional Standard 3.3 V I/O with alternate functions SPI1_SCK and TIM2_CH1_ETR and additional functions ADC_IN5, DAC_OUT2 and COMP1_INP.
16 PA6 bidirectional 5 V tolerant (FT) I/O with alternate functions SPI1_MISO, TIM3_CH1, LCD_SEG3 and TIM10_CH1 and additional functions ADC_IN6 and COMP1_INP.
17 PA7 bidirectional 5 V tolerant (FT) I/O with alternate functions SPI1_MOSI, TIM3_CH2, LCD_SEG4 and TIM11_CH1 and additional functions ADC_IN7 and COMP1_INP.
18 PB0 bidirectional Standard 3.3 V I/O with alternate functions TIM3_CH3 and LCD_SEG5 and additional functions ADC_IN8, COMP1_INP, VREF_OUT and VLCDRAIL3.
19 PB1 bidirectional 5 V tolerant (FT) I/O with alternate functions TIM3_CH4 and LCD_SEG6 and additional functions ADC_IN9, COMP1_INP and VREF_OUT.
20 PB2/BOOT1 bidirectional 5 V tolerant (FT) I/O that doubles as the BOOT1 boot-mode pin and additionally provides VLCDRAIL1.
21 PB10 bidirectional 5 V tolerant (FT) I/O with alternate functions I2C2_SCL, USART3_TX, TIM2_CH3 and LCD_SEG10.
22 PB11 bidirectional 5 V tolerant (FT) I/O with alternate functions I2C2_SDA, USART3_RX, TIM2_CH4 and LCD_SEG11.
23 VSS_1 power_in Digital ground pin.
24 VDD_1 power_in Digital power supply pin.
25 PB12 bidirectional 5 V tolerant (FT) I/O with alternate functions SPI2_NSS, I2C2_SMBA, USART3_CK, LCD_SEG12 and TIM10_CH1 and additional functions ADC_IN18, COMP1_INP and VLCDRAIL2.
26 PB13 bidirectional 5 V tolerant (FT) I/O with alternate functions SPI2_SCK, USART3_CTS, LCD_SEG13 and TIM9_CH1 and additional functions ADC_IN19 and COMP1_INP.
27 PB14 bidirectional 5 V tolerant (FT) I/O with alternate functions SPI2_MISO, USART3_RTS, LCD_SEG14 and TIM9_CH2 and additional functions ADC_IN20 and COMP1_INP.
28 PB15 bidirectional 5 V tolerant (FT) I/O with alternate functions SPI2_MOSI, LCD_SEG15 and TIM11_CH1 and additional functions ADC_IN21, COMP1_INP and RTC_REFIN.
29 PA8 bidirectional 5 V tolerant (FT) I/O with alternate functions USART1_CK, MCO and LCD_COM0.
30 PA9 bidirectional 5 V tolerant (FT) I/O with alternate functions USART1_TX and LCD_COM1.
31 PA10 bidirectional 5 V tolerant (FT) I/O with alternate functions USART1_RX and LCD_COM2.
32 PA11 bidirectional 5 V tolerant (FT) I/O with alternate functions USART1_CTS and SPI1_MISO and additional function USB_DM.
33 PA12 bidirectional 5 V tolerant (FT) I/O with alternate functions USART1_RTS and SPI1_MOSI and additional function USB_DP.
34 PA13 bidirectional 5 V tolerant (FT) I/O whose alternate function is JTMS-SWDIO (serial wire debug data).
35 VSS_2 power_in Digital ground pin.
36 VDD_2 power_in Digital power supply pin.
37 PA14 bidirectional 5 V tolerant (FT) I/O whose alternate function is JTCK-SWCLK (serial wire debug clock).
38 PA15 bidirectional 5 V tolerant (FT) I/O with alternate functions JTDI, TIM2_CH1_ETR, SPI1_NSS and LCD_SEG17.
39 PB3 bidirectional 5 V tolerant (FT) I/O with alternate functions JTDO, TIM2_CH2, SPI1_SCK and LCD_SEG7 and additional function COMP2_INM.
40 PB4 bidirectional 5 V tolerant (FT) I/O with alternate functions NJTRST, TIM3_CH1, SPI1_MISO and LCD_SEG8 and additional function COMP2_INP.
41 PB5 bidirectional 5 V tolerant (FT) I/O with alternate functions I2C1_SMBA, TIM3_CH2, SPI1_MOSI and LCD_SEG9 and additional function COMP2_INP.
42 PB6 bidirectional 5 V tolerant (FT) I/O with alternate functions I2C1_SCL, TIM4_CH1 and USART1_TX.
43 PB7 bidirectional 5 V tolerant (FT) I/O with alternate functions I2C1_SDA, TIM4_CH2 and USART1_RX and additional function PVD_IN.
44 BOOT0 input Dedicated BOOT0 boot-mode selection input pin.
45 PB8 bidirectional 5 V tolerant (FT) I/O with alternate functions TIM4_CH3, I2C1_SCL, LCD_SEG16 and TIM10_CH1.
46 PB9 bidirectional 5 V tolerant (FT) I/O with alternate functions TIM4_CH4, I2C1_SDA, LCD_COM3 and TIM11_CH1.
47 VSS_3 power_in Digital ground pin.
48 VDD_3 power_in Digital power supply pin.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package LQFP-48(7x7)
Category Embedded Processors & Controllers
Pins 48

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
External main supply voltage (including VDDA and VDD) VDD-VSS -0.3 4 V 55
Variations between different VDD power pins /ΔVDDx/ 50 mV 55
Variations between all different ground pins (includes VREF-) /VSSX −VSS/ 50 mV 55
Allowed voltage difference for VREF+ > VDDA VREF+ −VDDA 0.4 V VREF+ > VDDA 55
Total current into sum of all VDD_x power lines (source) ΣIVDD 100 mA 55
Total current out of sum of all VSS_x ground lines (sink) ΣIVSS 100 mA 55
Maximum current into each VDD_x power pin (source) IVDD(PIN) 70 mA 55
Maximum current out of each VSS_x ground pin (sink) IVSS(PIN) -70 mA 55
Output current sunk by any I/O and control pin IIO 25 mA 55
Output current sourced by any I/O and control pin IIO -25 mA 55
Total output current sunk by sum of all IOs and control pins ΣIIO(PIN) 60 mA 55
Total output current sourced by sum of all IOs and control pins ΣIIO(PIN) -60 mA 55
Injected current on five-volt tolerant I/O, RST and B pins IINJ(PIN) -5 0 mA Five-volt tolerant I/O, RST and B pins 55
Injected current on any other pin IINJ(PIN) -5 5 mA Any other pin 55
Total injected current (sum of all I/O and control pins) ΣIINJ(PIN) -25 25 mA 55
Storage temperature range TSTG -65 150 °C 56
Maximum junction temperature TJ 150 °C 56
Internal AHB clock frequency fHCLK 0 32 MHz 56
Internal APB1 clock frequency fPCLK1 0 32 MHz 56
Internal APB2 clock frequency fPCLK2 0 32 MHz 56
Standard operating voltage VDD 1.65 3.6 V BOR detector disabled 56
Standard operating voltage VDD 1.8 3.6 V BOR detector enabled, at power on 56
Analog operating voltage VDDA 1.65 3.6 V ADC and DAC not used 56
Analog operating voltage VDDA 1.8 3.6 V ADC or DAC used 56
I/O input voltage, FT pins VIN -0.3 5.5 V FT pins, 2.0 V ≤ VDD 56
I/O input voltage, FT pins VIN -0.3 5.25 V FT pins, VDD < 2.0 V 56
I/O input voltage, BOOT0 VIN 0 5.5 V BOOT0 56
I/O input voltage, any other pin VIN -0.3 V Any other pin (max printed as VDD+0.3) 56
Power dissipation, LQFP48 package PD 364 mW TA = 85 °C for suffix 6 57
Ambient temperature for 6 suffix version TA -40 85 °C Maximum power dissipation 57
Junction temperature range 6 suffix version TJ -40 105 °C 57
Power on/power down reset threshold (VPOR/PDR) VPOR/PDR 1 1.5 1.65 V Falling edge 57
Power on/power down reset threshold (VPOR/PDR) VPOR/PDR 1.3 1.5 1.65 V Rising edge 57
Brown-out reset threshold 0 VBOR0 1.67 1.7 1.74 V Falling edge 58
Brown-out reset threshold 0 VBOR0 1.69 1.76 1.8 V Rising edge 58
Brown-out reset threshold 1 VBOR1 1.87 1.93 1.97 V Falling edge 58
Brown-out reset threshold 1 VBOR1 1.96 2.03 2.07 V Rising edge 58
Brown-out reset threshold 2 VBOR2 2.22 2.3 2.35 V Falling edge 58
Brown-out reset threshold 2 VBOR2 2.31 2.41 2.44 V Rising edge 58
Brown-out reset threshold 3 VBOR3 2.45 2.55 2.6 V Falling edge 58
Brown-out reset threshold 3 VBOR3 2.54 2.66 2.7 V Rising edge 58
Brown-out reset threshold 4 VBOR4 2.68 2.8 2.85 V Falling edge 58
Brown-out reset threshold 4 VBOR4 2.78 2.9 2.95 V Rising edge 58
Internal reference voltage VREFINT out 1.202 1.224 1.242 V -40 °C < TJ < +110 °C 59
VDDA and VREF+ voltage during VREFINT factory measure VVREF_MEAS 2.99 3 3.01 V 59
Internal reference current consumption IREFINT 1.4 2.3 µA 59
Temperature coefficient TCoeff 25 100 ppm/°C -40 °C < TJ < +110 °C 59
Long-term stability ACoeff 1000 ppm 1000 hours, T= 25 °C 59
Voltage coefficient VDDCoeff 2000 ppm/V 3.0 V < VDDA < 3.6 V 59
Accuracy of the factory-calibrated HSI oscillator ACCHSI -4 3 % VDDA = 1.65 V to 3.6 V, TA = -40 to 105 °C 77
Accuracy of the factory-calibrated HSI oscillator ACCHSI -1.5 1.5 % VDDA = 3.0 V, TA = 0 to 55 °C 77
LSI frequency fLSI 26 38 56 kHz 77
LSI oscillator frequency drift DLSI -10 4 % 0°C ≤ TA ≤ 85°C 77
Frequency error after factory calibration ACCMSI -0.5 0.5 % 78
PLL input clock fPLL_IN 2 24 MHz 79
PLL output clock fPLL_OUT 2 32 MHz 79
Oscillator frequency (HSE) fOSC_IN 1 24 MHz 73
Output low level voltage for an I/O pin VOL 0.4 V IIO = 8 mA, 2.7 V < VDD < 3.6 V 85
Cycling (erase / write), program memory NCYC 10 kcycles TA = -40 °C to 105 °C 80

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin TLEAD Maximum lead temperature during soldering see note (1) 1. Compliant with JEDEC Std J-STD-020D (for small body, Sn-Pb or Pb assembly), the ST ECOPACK® 56

CAD (KiCad official)

  • Symbol: STM32L151C6T6ATR
  • Footprint: Package_QFP:LQFP-48_7x7mm_P0.5mm
  • 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
  • 3D model files: stm32l151c6t6atr-etched.step / stm32l151c6t6atr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm32l151c6t6atr.step / stm32l151c6t6atr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (130 pp, sha256 e5e0ab791f4e7879, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF