main
History Download
Ray Publish 0.1.0 157e747

STM32L100R8T6

ST(意法半导体) · IC · LQFP-64(10x10)

STM32L100R8T6 from ST(意法半导体), in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VLCD power_in Optional LCD power supply pin for the LCD controller, used with the optional LCD power supply scheme in Section 6.1.7.
2 PC13-WKUP2 bidirectional 5 V tolerant (FT) I/O with main function PC13 after reset; additional functions are RTC_TAMP1, RTC_TS, RTC_OUT and WKUP2.
3 PC14-OSC32_IN bidirectional Standard 3.3 V (TC) I/O with main function PC14 after reset; it is OSC32_IN only when the LSE oscillator is on (LSEON bit in RCC_CSR), otherwise it can be used as a GPIO.
4 PC15-OSC32_OUT bidirectional Standard 3.3 V (TC) I/O with main function PC15 after reset; it is OSC32_OUT only when the LSE oscillator is on (LSEON bit in RCC_CSR), otherwise it can be used as a GPIO.
5 PH0-OSC_IN bidirectional Standard 3.3 V (TC) I/O with main function PH0 after reset; it is OSC_IN only when the HSE oscillator is on (HSEON bit in RCC_CR), otherwise it can be used as a GPIO.
6 PH1-OSC_OUT bidirectional Standard 3.3 V (TC) I/O with main function PH1 after reset; it is OSC_OUT only when the HSE oscillator is on (HSEON bit in RCC_CR), otherwise it can be used as a GPIO.
7 NRST bidirectional Bidirectional reset pin with an embedded weak pull-up resistor.
8 PC0 bidirectional 5 V tolerant (FT) I/O; alternate function LCD_SEG18, additional functions ADC_IN10 and COMP1_INP.
9 PC1 bidirectional 5 V tolerant (FT) I/O; alternate function LCD_SEG19, additional functions ADC_IN11 and COMP1_INP.
10 PC2 bidirectional 5 V tolerant (FT) I/O; alternate function LCD_SEG20, additional functions ADC_IN12 and COMP1_INP.
11 PC3 bidirectional Standard 3.3 V (TC) I/O; alternate function LCD_SEG21, additional functions ADC_IN13 and COMP1_INP.
12 VSSA power_in Analog ground supply pin for the ADC, DAC and comparators.
13 VDDA power_in Analog supply pin for the ADC, DAC and comparators.
14 PA0-WKUP1 bidirectional 5 V tolerant (FT) I/O; alternate functions USART2_CTS and TIM2_CH1_ETR, additional functions WKUP1, ADC_IN0 and COMP1_INP.
15 PA1 bidirectional 5 V tolerant (FT) I/O; alternate functions USART2_RTS, TIM2_CH2 and LCD_SEG0, additional functions ADC_IN1 and COMP1_INP.
16 PA2 bidirectional 5 V tolerant (FT) I/O; alternate functions USART2_TX, TIM2_CH3, TIM9_CH1 and LCD_SEG1, additional functions ADC_IN2 and COMP1_INP.
17 PA3 bidirectional Standard 3.3 V (TC) I/O; alternate functions USART2_RX, TIM2_CH4, TIM9_CH2 and LCD_SEG2, additional functions ADC_IN3 and COMP1_INP.
18 VSS_4 power_in Digital ground supply pin.
19 VDD_4 power_in Digital supply pin; the device supply range is 1.8 V to 3.6 V per the features list.
20 PA4 bidirectional Standard 3.3 V (TC) I/O; alternate functions SPI1_NSS and USART2_CK, additional functions ADC_IN4, DAC_OUT1 and COMP1_INP.
21 PA5 bidirectional Standard 3.3 V (TC) I/O; alternate functions SPI1_SCK and TIM2_CH1_ETR, additional functions ADC_IN5, DAC_OUT2 and COMP1_INP.
22 PA6 bidirectional 5 V tolerant (FT) I/O; alternate functions SPI1_MISO, TIM3_CH1, LCD_SEG3 and TIM10_CH1, additional functions ADC_IN6 and COMP1_INP.
23 PA7 bidirectional 5 V tolerant (FT) I/O; alternate functions SPI1_MOSI, TIM3_CH2, LCD_SEG4 and TIM11_CH1, additional functions ADC_IN7 and COMP1_INP.
24 PC4 bidirectional 5 V tolerant (FT) I/O; alternate function LCD_SEG22, additional functions ADC_IN14 and COMP1_INP.
25 PC5 bidirectional 5 V tolerant (FT) I/O; alternate function LCD_SEG23, additional functions ADC_IN15 and COMP1_INP.
26 PB0 bidirectional Standard 3.3 V (TC) I/O; alternate functions TIM3_CH3 and LCD_SEG5, additional functions ADC_IN8, COMP1_INP and VREF_OUT.
27 PB1 bidirectional 5 V tolerant (FT) I/O; alternate functions TIM3_CH4 and LCD_SEG6, additional functions ADC_IN9, COMP1_INP and VREF_OUT.
28 PB2/BOOT1 bidirectional 5 V tolerant (FT) I/O with main function PB2 after reset; it also serves as the BOOT1 pin.
29 PB10 bidirectional 5 V tolerant (FT) I/O; alternate functions I2C2_SCL, USART3_TX, TIM2_CH3 and LCD_SEG10.
30 PB11 bidirectional 5 V tolerant (FT) I/O; alternate functions I2C2_SDA, USART3_RX, TIM2_CH4 and LCD_SEG11.
31 VSS_1 power_in Digital ground supply pin.
32 VDD_1 power_in Digital supply pin; the device supply range is 1.8 V to 3.6 V per the features list.
33 PB12 bidirectional 5 V tolerant (FT) I/O; alternate functions SPI2_NSS, I2C2_SMBA, USART3_CK, LCD_SEG12 and TIM10_CH1, additional functions ADC_IN18 and COMP1_INP.
34 PB13 bidirectional 5 V tolerant (FT) I/O; alternate functions SPI2_SCK, USART3_CTS, LCD_SEG13 and TIM9_CH1, additional functions ADC_IN19 and COMP1_INP.
35 PB14 bidirectional 5 V tolerant (FT) I/O; alternate functions SPI2_MISO, USART3_RTS, LCD_SEG14 and TIM9_CH2, additional functions ADC_IN20 and COMP1_INP.
36 PB15 bidirectional 5 V tolerant (FT) I/O; alternate functions SPI2_MOSI, LCD_SEG15 and TIM11_CH1, additional functions ADC_IN21, COMP1_INP and RTC_REFIN.
37 PC6 bidirectional 5 V tolerant (FT) I/O; alternate functions TIM3_CH1 and LCD_SEG24.
38 PC7 bidirectional 5 V tolerant (FT) I/O; alternate functions TIM3_CH2 and LCD_SEG25.
39 PC8 bidirectional 5 V tolerant (FT) I/O; alternate functions TIM3_CH3 and LCD_SEG26.
40 PC9 bidirectional 5 V tolerant (FT) I/O; alternate functions TIM3_CH4 and LCD_SEG27.
41 PA8 bidirectional 5 V tolerant (FT) I/O; alternate functions USART1_CK, MCO and LCD_COM0.
42 PA9 bidirectional 5 V tolerant (FT) I/O; alternate functions USART1_TX and LCD_COM1.
43 PA10 bidirectional 5 V tolerant (FT) I/O; alternate functions USART1_RX and LCD_COM2.
44 PA11 bidirectional 5 V tolerant (FT) I/O; alternate functions USART1_CTS and SPI1_MISO, additional function USB_DM.
45 PA12 bidirectional 5 V tolerant (FT) I/O; alternate functions USART1_RTS and SPI1_MOSI, additional function USB_DP.
46 PA13 bidirectional 5 V tolerant (FT) I/O with main function JTMS-SWDIO after reset (serial wire debug data).
47 VSS_2 power_in Digital ground supply pin.
48 VDD_2 power_in Digital supply pin; the device supply range is 1.8 V to 3.6 V per the features list.
49 PA14 bidirectional 5 V tolerant (FT) I/O with main function JTCK-SWCLK after reset (serial wire debug clock).
50 PA15 bidirectional 5 V tolerant (FT) I/O with main function JTDI after reset; alternate functions TIM2_CH1_ETR, SPI1_NSS and LCD_SEG17.
51 PC10 bidirectional 5 V tolerant (FT) I/O; alternate functions USART3_TX, LCD_SEG28, LCD_SEG40 and LCD_COM4.
52 PC11 bidirectional 5 V tolerant (FT) I/O; alternate functions USART3_RX, LCD_SEG29, LCD_SEG41 and LCD_COM5.
53 PC12 bidirectional 5 V tolerant (FT) I/O; alternate functions USART3_CK, LCD_SEG30, LCD_SEG42 and LCD_COM6.
54 PD2 bidirectional 5 V tolerant (FT) I/O; alternate functions TIM3_ETR, LCD_SEG30, LCD_SEG43 and LCD_COM7 as printed in Table 7.
55 PB3 bidirectional 5 V tolerant (FT) I/O with main function JTDO after reset; alternate functions TIM2_CH2, SPI1_SCK and LCD_SEG7, additional function COMP2_INM.
56 PB4 bidirectional 5 V tolerant (FT) I/O with main function NJTRST after reset; alternate functions TIM3_CH1, SPI1_MISO and LCD_SEG8, additional function COMP2_INP.
57 PB5 bidirectional 5 V tolerant (FT) I/O; alternate functions I2C1_SMBA, TIM3_CH2, SPI1_MOSI and LCD_SEG9, additional function COMP2_INP.
58 PB6 bidirectional 5 V tolerant (FT) I/O; alternate functions I2C1_SCL, TIM4_CH1 and USART1_TX.
59 PB7 bidirectional 5 V tolerant (FT) I/O; alternate functions I2C1_SDA, TIM4_CH2 and USART1_RX, additional function PVD_IN.
60 BOOT0 input Dedicated BOOT0 input pin (input only, I/O structure B) used to select the boot mode.
61 PB8 bidirectional 5 V tolerant (FT) I/O; alternate functions TIM4_CH3, I2C1_SCL, LCD_SEG16 and TIM10_CH1.
62 PB9 bidirectional 5 V tolerant (FT) I/O; alternate functions TIM4_CH4, I2C1_SDA, LCD_COM3 and TIM11_CH1.
63 VSS_3 power_in Digital ground supply pin.
64 VDD_3 power_in Digital supply pin; the device supply range is 1.8 V to 3.6 V per the features list.

Key specifications

Parameter Value
Manufacturer ST(意法半导体)
Package LQFP-64(10x10)
Category
Pins 64

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
External main supply voltage (including VDDA and VDD) VDD-VSS -0.3 4 V 43
Input voltage on any other pin VIN 4 V 43
Variations between different VDD power pins /ΔVDDx/ 50 mV 43
Variations between all different ground pins (includes VREF-) /VSSX −VSS/ 50 mV 43
Total current into VDD/VDDA power lines (source) ΣIVDD 80 mA 43
Total current out of VSS ground lines (sink) ΣIVSS 80 mA 43
Output current sunk by any I/O and control pin IIO 25 mA 43
Output current sourced by any I/O and control pin IIO -25 mA printed as '- 25' 43
Injected current on five-volt tolerant RST and B pins IINJ(PIN) -5 0 mA 43
Injected current on any other pin IINJ(PIN) -5 5 mA 43
Total injected current (sum of all I/O and control pins) ΣIINJ(PIN) -25 25 mA 43
Storage temperature range TSTG -65 150 °C 44
Maximum junction temperature TJ 105 °C 44
Internal AHB clock frequency fHCLK 0 32 MHz 44
Internal APB1 clock frequency fPCLK1 0 32 MHz 44
Internal APB2 clock frequency fPCLK2 0 32 MHz 44
Standard operating voltage VDD 1.8 3.6 V BOR detector enabled (at power-on) 44
Standard operating voltage VDD 1.65 3.6 V BOR detector disabled, after power on 44
Analog operating voltage VDDA 1.8 3.6 V Must be the same voltage as VDD 44
I/O input voltage (FT pins) VIN -0.3 5.5 V FT pins, VDD ≥ 2.0 V 44
I/O input voltage (FT pins) VIN -0.3 5.25 V FT pins, VDD < 2.0 V 44
I/O input voltage (BOOT0) VIN 0 5.5 V BOOT0 44
I/O input voltage (any other pin) VIN -0.3 V Any other pin; max printed as VDD+0.3 44
Power dissipation at TA = 85 °C PD 444 mW TA = 85 °C, LQFP64 package 44
Ambient temperature range TA -40 85 °C Maximum power dissipation 44
Junction temperature range TJ -40 105 °C -40 °C ≤ TA ≤ 85 °C 44
Power on/power down reset threshold VPOR/PDR 1 1.5 1.65 V Falling edge 45
Power on/power down reset threshold VPOR/PDR 1.3 1.5 1.65 V Rising edge 45
Brown-out reset threshold 0 VBOR0 1.67 1.7 1.74 V Falling edge 45
Brown-out reset threshold 0 VBOR0 1.69 1.76 1.8 V Rising edge 45
Reset temporization TRSTTEMPO 2 3.3 ms VDD rising, BOR enabled 45
Internal reference voltage VREFINT out 1.202 1.224 1.242 V -40 °C < TJ < +85 °C 47
Temperature coefficient TCoeff 25 100 ppm/°C -40 °C < TJ < +105 °C 47
Internal reference current consumption IREFINT 1.4 2.3 µA 47
Maximum source impedance / HSE oscillator user external clock source frequency fHSE_ext 8 32 MHz CSS is on or PLL is used 59
Low speed external oscillator user external clock source frequency fLSE_ext 1 32.768 1000 kHz 60
Oscillator frequency (HSE) fOSC_IN 1 24 MHz 60
HSI user-independent frequency accuracy ACCHSI -10 10 % VDDA = 1.8 V to 3.6 V, TA = -40 to 85 °C 64
HSI oscillator power consumption IDD(HSI) 100 140 µA 64
LSI frequency fLSI 26 38 56 kHz 64
LSI oscillator frequency drift DLSI -10 4 % 0 °C ≤ TA ≤ 85 °C 64
LSI oscillator power consumption IDD(LSI) 400 510 nA 64
PLL input clock fPLL_IN 2 24 MHz 66
PLL input clock duty cycle PLL input clock duty cycle 45 55 % 66
PLL output clock fPLL_OUT 2 32 MHz 66
PLL lock time tLOCK 115 160 µs PLL input = 16 MHz, PLL VCO = 96 MHz 66
Cycle-to-cycle jitter Jitter -600 600 ps 66
Data retention mode (minimum supply voltage without losing RAM data) VRM 1.8 V STOP mode (or RESET) 67
Supply current in Run mode, code executed from Flash IDD (Run from Flash) 9.6 11 mA Range 1, VCORE=1.8 V, VOS[1:0]=01, fHCLK 32 MHz, max at 55 °C and 85 °C 49
Max allowed current in Low power run mode IDD Max (LP Run) 200 µA VDD from 1.8 V to 3.6 V; excludes I/O consumption 52
Supply current in Stop mode with RTC enabled IDD (Stop with RTC) 1.2 2.75 µA RTC by LSI, regulator LP, HSI and HSE OFF, LCD OFF, TA -40 to 25 °C, VDD = 1.8 V 54
Supply current in Stop mode with RTC enabled IDD (Stop with RTC) 4.8 10 µA RTC by LSI, LCD OFF, TA = 85 °C 54
Supply current in Stop mode (RTC disabled) IDD (Stop) 3.7 8 µA Regulator LP, LSI, HSI and HSE OFF, no IWDG, TA = 85 °C 54
Supply current in Standby mode with RTC enabled IDD (Standby with RTC) 1.87 3 µA RTC clocked by LSI, no IWDG, TA = 85 °C 55
Supply current in Standby mode (RTC disabled) IDD (Standby) 1 1.7 µA Independent watchdog and LSI OFF, TA = 85 °C 55
Weak pull-up equivalent resistor (I/O) RPU 30 45 60 kΩ VIN = VSS 71
NRST weak pull-up equivalent resistor RPU 30 45 60 kΩ VIN = VSS 74
Output low level voltage for an I/O pin VOL 0.4 V IIO = 8 mA, 2.7 V < VDD < 3.6 V 72

CAD (KiCad official)

  • Symbol: STM32L100R8T6
  • Footprint: Package_QFP:LQFP-64_10x10mm_P0.5mm
  • 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
  • 3D model files: stm32l100r8t6-etched.step / stm32l100r8t6-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm32l100r8t6.step / stm32l100r8t6.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: ST(意法半导体) datasheet (103 pp, sha256 17957a818953254a, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF