component
STM32L100R8T6
Public Made by Adomby adom
ST(意法半导体) , LQFP-64(10x10). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
STM32L100R8T6
ST(意法半导体) · IC · LQFP-64(10x10)
STM32L100R8T6 from ST(意法半导体), in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VLCD | power_in | Optional LCD power supply pin for the LCD controller, used with the optional LCD power supply scheme in Section 6.1.7. |
| 2 | PC13-WKUP2 | bidirectional | 5 V tolerant (FT) I/O with main function PC13 after reset; additional functions are RTC_TAMP1, RTC_TS, RTC_OUT and WKUP2. |
| 3 | PC14-OSC32_IN | bidirectional | Standard 3.3 V (TC) I/O with main function PC14 after reset; it is OSC32_IN only when the LSE oscillator is on (LSEON bit in RCC_CSR), otherwise it can be used as a GPIO. |
| 4 | PC15-OSC32_OUT | bidirectional | Standard 3.3 V (TC) I/O with main function PC15 after reset; it is OSC32_OUT only when the LSE oscillator is on (LSEON bit in RCC_CSR), otherwise it can be used as a GPIO. |
| 5 | PH0-OSC_IN | bidirectional | Standard 3.3 V (TC) I/O with main function PH0 after reset; it is OSC_IN only when the HSE oscillator is on (HSEON bit in RCC_CR), otherwise it can be used as a GPIO. |
| 6 | PH1-OSC_OUT | bidirectional | Standard 3.3 V (TC) I/O with main function PH1 after reset; it is OSC_OUT only when the HSE oscillator is on (HSEON bit in RCC_CR), otherwise it can be used as a GPIO. |
| 7 | NRST | bidirectional | Bidirectional reset pin with an embedded weak pull-up resistor. |
| 8 | PC0 | bidirectional | 5 V tolerant (FT) I/O; alternate function LCD_SEG18, additional functions ADC_IN10 and COMP1_INP. |
| 9 | PC1 | bidirectional | 5 V tolerant (FT) I/O; alternate function LCD_SEG19, additional functions ADC_IN11 and COMP1_INP. |
| 10 | PC2 | bidirectional | 5 V tolerant (FT) I/O; alternate function LCD_SEG20, additional functions ADC_IN12 and COMP1_INP. |
| 11 | PC3 | bidirectional | Standard 3.3 V (TC) I/O; alternate function LCD_SEG21, additional functions ADC_IN13 and COMP1_INP. |
| 12 | VSSA | power_in | Analog ground supply pin for the ADC, DAC and comparators. |
| 13 | VDDA | power_in | Analog supply pin for the ADC, DAC and comparators. |
| 14 | PA0-WKUP1 | bidirectional | 5 V tolerant (FT) I/O; alternate functions USART2_CTS and TIM2_CH1_ETR, additional functions WKUP1, ADC_IN0 and COMP1_INP. |
| 15 | PA1 | bidirectional | 5 V tolerant (FT) I/O; alternate functions USART2_RTS, TIM2_CH2 and LCD_SEG0, additional functions ADC_IN1 and COMP1_INP. |
| 16 | PA2 | bidirectional | 5 V tolerant (FT) I/O; alternate functions USART2_TX, TIM2_CH3, TIM9_CH1 and LCD_SEG1, additional functions ADC_IN2 and COMP1_INP. |
| 17 | PA3 | bidirectional | Standard 3.3 V (TC) I/O; alternate functions USART2_RX, TIM2_CH4, TIM9_CH2 and LCD_SEG2, additional functions ADC_IN3 and COMP1_INP. |
| 18 | VSS_4 | power_in | Digital ground supply pin. |
| 19 | VDD_4 | power_in | Digital supply pin; the device supply range is 1.8 V to 3.6 V per the features list. |
| 20 | PA4 | bidirectional | Standard 3.3 V (TC) I/O; alternate functions SPI1_NSS and USART2_CK, additional functions ADC_IN4, DAC_OUT1 and COMP1_INP. |
| 21 | PA5 | bidirectional | Standard 3.3 V (TC) I/O; alternate functions SPI1_SCK and TIM2_CH1_ETR, additional functions ADC_IN5, DAC_OUT2 and COMP1_INP. |
| 22 | PA6 | bidirectional | 5 V tolerant (FT) I/O; alternate functions SPI1_MISO, TIM3_CH1, LCD_SEG3 and TIM10_CH1, additional functions ADC_IN6 and COMP1_INP. |
| 23 | PA7 | bidirectional | 5 V tolerant (FT) I/O; alternate functions SPI1_MOSI, TIM3_CH2, LCD_SEG4 and TIM11_CH1, additional functions ADC_IN7 and COMP1_INP. |
| 24 | PC4 | bidirectional | 5 V tolerant (FT) I/O; alternate function LCD_SEG22, additional functions ADC_IN14 and COMP1_INP. |
| 25 | PC5 | bidirectional | 5 V tolerant (FT) I/O; alternate function LCD_SEG23, additional functions ADC_IN15 and COMP1_INP. |
| 26 | PB0 | bidirectional | Standard 3.3 V (TC) I/O; alternate functions TIM3_CH3 and LCD_SEG5, additional functions ADC_IN8, COMP1_INP and VREF_OUT. |
| 27 | PB1 | bidirectional | 5 V tolerant (FT) I/O; alternate functions TIM3_CH4 and LCD_SEG6, additional functions ADC_IN9, COMP1_INP and VREF_OUT. |
| 28 | PB2/BOOT1 | bidirectional | 5 V tolerant (FT) I/O with main function PB2 after reset; it also serves as the BOOT1 pin. |
| 29 | PB10 | bidirectional | 5 V tolerant (FT) I/O; alternate functions I2C2_SCL, USART3_TX, TIM2_CH3 and LCD_SEG10. |
| 30 | PB11 | bidirectional | 5 V tolerant (FT) I/O; alternate functions I2C2_SDA, USART3_RX, TIM2_CH4 and LCD_SEG11. |
| 31 | VSS_1 | power_in | Digital ground supply pin. |
| 32 | VDD_1 | power_in | Digital supply pin; the device supply range is 1.8 V to 3.6 V per the features list. |
| 33 | PB12 | bidirectional | 5 V tolerant (FT) I/O; alternate functions SPI2_NSS, I2C2_SMBA, USART3_CK, LCD_SEG12 and TIM10_CH1, additional functions ADC_IN18 and COMP1_INP. |
| 34 | PB13 | bidirectional | 5 V tolerant (FT) I/O; alternate functions SPI2_SCK, USART3_CTS, LCD_SEG13 and TIM9_CH1, additional functions ADC_IN19 and COMP1_INP. |
| 35 | PB14 | bidirectional | 5 V tolerant (FT) I/O; alternate functions SPI2_MISO, USART3_RTS, LCD_SEG14 and TIM9_CH2, additional functions ADC_IN20 and COMP1_INP. |
| 36 | PB15 | bidirectional | 5 V tolerant (FT) I/O; alternate functions SPI2_MOSI, LCD_SEG15 and TIM11_CH1, additional functions ADC_IN21, COMP1_INP and RTC_REFIN. |
| 37 | PC6 | bidirectional | 5 V tolerant (FT) I/O; alternate functions TIM3_CH1 and LCD_SEG24. |
| 38 | PC7 | bidirectional | 5 V tolerant (FT) I/O; alternate functions TIM3_CH2 and LCD_SEG25. |
| 39 | PC8 | bidirectional | 5 V tolerant (FT) I/O; alternate functions TIM3_CH3 and LCD_SEG26. |
| 40 | PC9 | bidirectional | 5 V tolerant (FT) I/O; alternate functions TIM3_CH4 and LCD_SEG27. |
| 41 | PA8 | bidirectional | 5 V tolerant (FT) I/O; alternate functions USART1_CK, MCO and LCD_COM0. |
| 42 | PA9 | bidirectional | 5 V tolerant (FT) I/O; alternate functions USART1_TX and LCD_COM1. |
| 43 | PA10 | bidirectional | 5 V tolerant (FT) I/O; alternate functions USART1_RX and LCD_COM2. |
| 44 | PA11 | bidirectional | 5 V tolerant (FT) I/O; alternate functions USART1_CTS and SPI1_MISO, additional function USB_DM. |
| 45 | PA12 | bidirectional | 5 V tolerant (FT) I/O; alternate functions USART1_RTS and SPI1_MOSI, additional function USB_DP. |
| 46 | PA13 | bidirectional | 5 V tolerant (FT) I/O with main function JTMS-SWDIO after reset (serial wire debug data). |
| 47 | VSS_2 | power_in | Digital ground supply pin. |
| 48 | VDD_2 | power_in | Digital supply pin; the device supply range is 1.8 V to 3.6 V per the features list. |
| 49 | PA14 | bidirectional | 5 V tolerant (FT) I/O with main function JTCK-SWCLK after reset (serial wire debug clock). |
| 50 | PA15 | bidirectional | 5 V tolerant (FT) I/O with main function JTDI after reset; alternate functions TIM2_CH1_ETR, SPI1_NSS and LCD_SEG17. |
| 51 | PC10 | bidirectional | 5 V tolerant (FT) I/O; alternate functions USART3_TX, LCD_SEG28, LCD_SEG40 and LCD_COM4. |
| 52 | PC11 | bidirectional | 5 V tolerant (FT) I/O; alternate functions USART3_RX, LCD_SEG29, LCD_SEG41 and LCD_COM5. |
| 53 | PC12 | bidirectional | 5 V tolerant (FT) I/O; alternate functions USART3_CK, LCD_SEG30, LCD_SEG42 and LCD_COM6. |
| 54 | PD2 | bidirectional | 5 V tolerant (FT) I/O; alternate functions TIM3_ETR, LCD_SEG30, LCD_SEG43 and LCD_COM7 as printed in Table 7. |
| 55 | PB3 | bidirectional | 5 V tolerant (FT) I/O with main function JTDO after reset; alternate functions TIM2_CH2, SPI1_SCK and LCD_SEG7, additional function COMP2_INM. |
| 56 | PB4 | bidirectional | 5 V tolerant (FT) I/O with main function NJTRST after reset; alternate functions TIM3_CH1, SPI1_MISO and LCD_SEG8, additional function COMP2_INP. |
| 57 | PB5 | bidirectional | 5 V tolerant (FT) I/O; alternate functions I2C1_SMBA, TIM3_CH2, SPI1_MOSI and LCD_SEG9, additional function COMP2_INP. |
| 58 | PB6 | bidirectional | 5 V tolerant (FT) I/O; alternate functions I2C1_SCL, TIM4_CH1 and USART1_TX. |
| 59 | PB7 | bidirectional | 5 V tolerant (FT) I/O; alternate functions I2C1_SDA, TIM4_CH2 and USART1_RX, additional function PVD_IN. |
| 60 | BOOT0 | input | Dedicated BOOT0 input pin (input only, I/O structure B) used to select the boot mode. |
| 61 | PB8 | bidirectional | 5 V tolerant (FT) I/O; alternate functions TIM4_CH3, I2C1_SCL, LCD_SEG16 and TIM10_CH1. |
| 62 | PB9 | bidirectional | 5 V tolerant (FT) I/O; alternate functions TIM4_CH4, I2C1_SDA, LCD_COM3 and TIM11_CH1. |
| 63 | VSS_3 | power_in | Digital ground supply pin. |
| 64 | VDD_3 | power_in | Digital supply pin; the device supply range is 1.8 V to 3.6 V per the features list. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ST(意法半导体) |
| Package | LQFP-64(10x10) |
| Category | |
| Pins | 64 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| External main supply voltage (including VDDA and VDD) | VDD-VSS | -0.3 | 4 | V | 43 | ||
| Input voltage on any other pin | VIN | 4 | V | 43 | |||
| Variations between different VDD power pins | /ΔVDDx/ | 50 | mV | 43 | |||
| Variations between all different ground pins (includes VREF-) | /VSSX −VSS/ | 50 | mV | 43 | |||
| Total current into VDD/VDDA power lines (source) | ΣIVDD | 80 | mA | 43 | |||
| Total current out of VSS ground lines (sink) | ΣIVSS | 80 | mA | 43 | |||
| Output current sunk by any I/O and control pin | IIO | 25 | mA | 43 | |||
| Output current sourced by any I/O and control pin | IIO | -25 | mA | printed as '- 25' | 43 | ||
| Injected current on five-volt tolerant RST and B pins | IINJ(PIN) | -5 | 0 | mA | 43 | ||
| Injected current on any other pin | IINJ(PIN) | -5 | 5 | mA | 43 | ||
| Total injected current (sum of all I/O and control pins) | ΣIINJ(PIN) | -25 | 25 | mA | 43 | ||
| Storage temperature range | TSTG | -65 | 150 | °C | 44 | ||
| Maximum junction temperature | TJ | 105 | °C | 44 | |||
| Internal AHB clock frequency | fHCLK | 0 | 32 | MHz | 44 | ||
| Internal APB1 clock frequency | fPCLK1 | 0 | 32 | MHz | 44 | ||
| Internal APB2 clock frequency | fPCLK2 | 0 | 32 | MHz | 44 | ||
| Standard operating voltage | VDD | 1.8 | 3.6 | V | BOR detector enabled (at power-on) | 44 | |
| Standard operating voltage | VDD | 1.65 | 3.6 | V | BOR detector disabled, after power on | 44 | |
| Analog operating voltage | VDDA | 1.8 | 3.6 | V | Must be the same voltage as VDD | 44 | |
| I/O input voltage (FT pins) | VIN | -0.3 | 5.5 | V | FT pins, VDD ≥ 2.0 V | 44 | |
| I/O input voltage (FT pins) | VIN | -0.3 | 5.25 | V | FT pins, VDD < 2.0 V | 44 | |
| I/O input voltage (BOOT0) | VIN | 0 | 5.5 | V | BOOT0 | 44 | |
| I/O input voltage (any other pin) | VIN | -0.3 | V | Any other pin; max printed as VDD+0.3 | 44 | ||
| Power dissipation at TA = 85 °C | PD | 444 | mW | TA = 85 °C, LQFP64 package | 44 | ||
| Ambient temperature range | TA | -40 | 85 | °C | Maximum power dissipation | 44 | |
| Junction temperature range | TJ | -40 | 105 | °C | -40 °C ≤ TA ≤ 85 °C | 44 | |
| Power on/power down reset threshold | VPOR/PDR | 1 | 1.5 | 1.65 | V | Falling edge | 45 |
| Power on/power down reset threshold | VPOR/PDR | 1.3 | 1.5 | 1.65 | V | Rising edge | 45 |
| Brown-out reset threshold 0 | VBOR0 | 1.67 | 1.7 | 1.74 | V | Falling edge | 45 |
| Brown-out reset threshold 0 | VBOR0 | 1.69 | 1.76 | 1.8 | V | Rising edge | 45 |
| Reset temporization | TRSTTEMPO | 2 | 3.3 | ms | VDD rising, BOR enabled | 45 | |
| Internal reference voltage | VREFINT out | 1.202 | 1.224 | 1.242 | V | -40 °C < TJ < +85 °C | 47 |
| Temperature coefficient | TCoeff | 25 | 100 | ppm/°C | -40 °C < TJ < +105 °C | 47 | |
| Internal reference current consumption | IREFINT | 1.4 | 2.3 | µA | 47 | ||
| Maximum source impedance / HSE oscillator user external clock source frequency | fHSE_ext | 8 | 32 | MHz | CSS is on or PLL is used | 59 | |
| Low speed external oscillator user external clock source frequency | fLSE_ext | 1 | 32.768 | 1000 | kHz | 60 | |
| Oscillator frequency (HSE) | fOSC_IN | 1 | 24 | MHz | 60 | ||
| HSI user-independent frequency accuracy | ACCHSI | -10 | 10 | % | VDDA = 1.8 V to 3.6 V, TA = -40 to 85 °C | 64 | |
| HSI oscillator power consumption | IDD(HSI) | 100 | 140 | µA | 64 | ||
| LSI frequency | fLSI | 26 | 38 | 56 | kHz | 64 | |
| LSI oscillator frequency drift | DLSI | -10 | 4 | % | 0 °C ≤ TA ≤ 85 °C | 64 | |
| LSI oscillator power consumption | IDD(LSI) | 400 | 510 | nA | 64 | ||
| PLL input clock | fPLL_IN | 2 | 24 | MHz | 66 | ||
| PLL input clock duty cycle | PLL input clock duty cycle | 45 | 55 | % | 66 | ||
| PLL output clock | fPLL_OUT | 2 | 32 | MHz | 66 | ||
| PLL lock time | tLOCK | 115 | 160 | µs | PLL input = 16 MHz, PLL VCO = 96 MHz | 66 | |
| Cycle-to-cycle jitter | Jitter | -600 | 600 | ps | 66 | ||
| Data retention mode (minimum supply voltage without losing RAM data) | VRM | 1.8 | V | STOP mode (or RESET) | 67 | ||
| Supply current in Run mode, code executed from Flash | IDD (Run from Flash) | 9.6 | 11 | mA | Range 1, VCORE=1.8 V, VOS[1:0]=01, fHCLK 32 MHz, max at 55 °C and 85 °C | 49 | |
| Max allowed current in Low power run mode | IDD Max (LP Run) | 200 | µA | VDD from 1.8 V to 3.6 V; excludes I/O consumption | 52 | ||
| Supply current in Stop mode with RTC enabled | IDD (Stop with RTC) | 1.2 | 2.75 | µA | RTC by LSI, regulator LP, HSI and HSE OFF, LCD OFF, TA -40 to 25 °C, VDD = 1.8 V | 54 | |
| Supply current in Stop mode with RTC enabled | IDD (Stop with RTC) | 4.8 | 10 | µA | RTC by LSI, LCD OFF, TA = 85 °C | 54 | |
| Supply current in Stop mode (RTC disabled) | IDD (Stop) | 3.7 | 8 | µA | Regulator LP, LSI, HSI and HSE OFF, no IWDG, TA = 85 °C | 54 | |
| Supply current in Standby mode with RTC enabled | IDD (Standby with RTC) | 1.87 | 3 | µA | RTC clocked by LSI, no IWDG, TA = 85 °C | 55 | |
| Supply current in Standby mode (RTC disabled) | IDD (Standby) | 1 | 1.7 | µA | Independent watchdog and LSI OFF, TA = 85 °C | 55 | |
| Weak pull-up equivalent resistor (I/O) | RPU | 30 | 45 | 60 | kΩ | VIN = VSS | 71 |
| NRST weak pull-up equivalent resistor | RPU | 30 | 45 | 60 | kΩ | VIN = VSS | 74 |
| Output low level voltage for an I/O pin | VOL | 0.4 | V | IIO = 8 mA, 2.7 V < VDD < 3.6 V | 72 |
CAD (KiCad official)
- Symbol:
STM32L100R8T6 - Footprint:
Package_QFP:LQFP-64_10x10mm_P0.5mm - 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files:
stm32l100r8t6-etched.step/stm32l100r8t6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32l100r8t6.step/stm32l100r8t6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: ST(意法半导体) datasheet (103 pp, sha256
17957a818953254a, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).