main
Ray
Publish 0.1.0
84a746b
STM32L072CZU6
STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · UFQFPN-48(7x7)
STM32L072CZU6 from STMicroelectronics, in a UFQFPN-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Power supply pin for the device, specified from 1.65 V to 3.6 V in the datasheet. |
| 2 | PC13 | bidirectional | General-purpose 5 V tolerant I/O (FT) with RTC_TAMP1, RTC_TS, RTC_OUT and WKUP2 additional functions. |
| 3 | PC14-OSC32_IN | bidirectional | 5 V tolerant I/O (FT) that can be used as the OSC32_IN low-speed oscillator input. |
| 4 | PC15-OSC32_OUT | bidirectional | 3.3 V standard I/O (TC) that can be used as the OSC32_OUT low-speed oscillator output. |
| 5 | PH0-OSC_IN | bidirectional | 3.3 V standard I/O (TC) that can be used as the OSC_IN high-speed oscillator input, with USB_CRS_SYNC alternate function. |
| 6 | PH1-OSC_OUT | bidirectional | 3.3 V standard I/O (TC) that can be used as the OSC_OUT high-speed oscillator output. |
| 7 | NRST | bidirectional | Bidirectional reset pin with embedded weak pull-up resistor. |
| 8 | VSSA | power_in | Analog ground reference pin. |
| 9 | VDDA | power_in | Analog power supply pin. |
| 10 | PA0 | bidirectional | I/O pin with TIM2_CH1, TSC_G1_IO1, USART2_CTS, TIM2_ETR, USART4_TX and COMP1_OUT alternate functions, plus COMP1_INM, ADC_IN0 and RTC_TAMP2/WKUP1 additional functions. |
| 11 | PA1 | bidirectional | 5 V tolerant I/O (FT) with EVENTOUT, TIM2_CH2, TSC_G1_IO2, USART2_RTS/USART2_DE, TIM21_ETR and USART4_RX alternate functions, plus COMP1_INP and ADC_IN1. |
| 12 | PA2 | bidirectional | 5 V tolerant I/O (FT) with TIM21_CH1, TIM2_CH3, TSC_G1_IO3, USART2_TX, LPUART1_TX and COMP2_OUT alternate functions, plus COMP2_INM and ADC_IN2. |
| 13 | PA3 | bidirectional | 5 V tolerant I/O (FT) with TIM21_CH2, TIM2_CH4, TSC_G1_IO4, USART2_RX and LPUART1_RX alternate functions, plus COMP2_INP and ADC_IN3. |
| 14 | PA4 | bidirectional | 3.3 V standard I/O (TC) with SPI1_NSS, TSC_G2_IO1, USART2_CK and TIM22_ETR alternate functions, plus COMP1_INM, COMP2_INM, ADC_IN4 and DAC_OUT1; it offers reduced touch sensing sensitivity. |
| 15 | PA5 | bidirectional | 3.3 V standard I/O (TC) with SPI1_SCK, TIM2_ETR, TSC_G2_IO2 and TIM2_CH1 alternate functions, plus COMP1_INM, COMP2_INM, ADC_IN5 and DAC_OUT2. |
| 16 | PA6 | bidirectional | 5 V tolerant I/O (FT) with SPI1_MISO, TIM3_CH1, TSC_G2_IO3, LPUART1_CTS, TIM22_CH1, EVENTOUT and COMP1_OUT alternate functions, plus ADC_IN6. |
| 17 | PA7 | bidirectional | 5 V tolerant I/O (FT) with SPI1_MOSI, TIM3_CH2, TSC_G2_IO4, TIM22_CH2, EVENTOUT and COMP2_OUT alternate functions, plus ADC_IN7. |
| 18 | PB0 | bidirectional | 5 V tolerant I/O (FT) with EVENTOUT, TIM3_CH3 and TSC_G3_IO2 alternate functions, plus ADC_IN8 and VREF_OUT. |
| 19 | PB1 | bidirectional | 5 V tolerant I/O (FT) with TIM3_CH4, TSC_G3_IO3 and LPUART1_RTS/LPUART1_DE alternate functions, plus ADC_IN9 and VREF_OUT. |
| 20 | PB2 | bidirectional | 5 V tolerant I/O (FT) with LPTIM1_OUT, TSC_G3_IO4 and I2C3_SMBA alternate functions. |
| 21 | PB10 | bidirectional | 5 V tolerant I/O (FT) with TIM2_CH3, TSC_SYNC, LPUART1_TX, SPI2_SCK, I2C2_SCL and LPUART1_RX alternate functions. |
| 22 | PB11 | bidirectional | 5 V tolerant I/O (FT) with EVENTOUT, TIM2_CH4, TSC_G6_IO1, LPUART1_RX, I2C2_SDA and LPUART1_TX alternate functions. |
| 23 | VSS | power_in | Ground pin. |
| 24 | VDD | power_in | Power supply pin for the device, specified from 1.65 V to 3.6 V in the datasheet. |
| 25 | PB12 | bidirectional | 5 V tolerant I/O (FT) with SPI2_NSS/I2S2_WS, LPUART1_RTS/LPUART1_DE, TSC_G6_IO2, I2C2_SMBA and EVENTOUT alternate functions. |
| 26 | PB13 | bidirectional | 5 V tolerant I/O (FTf, FM+ capable) with SPI2_SCK/I2S2_CK, MCO, TSC_G6_IO3, LPUART1_CTS, I2C2_SCL and TIM21_CH1 alternate functions. |
| 27 | PB14 | bidirectional | 5 V tolerant I/O (FTf, FM+ capable) with SPI2_MISO/I2S2_MCK, RTC_OUT, TSC_G6_IO4, LPUART1_RTS/LPUART1_DE, I2C2_SDA and TIM21_CH2 alternate functions. |
| 28 | PB15 | bidirectional | 5 V tolerant I/O (FT) with SPI2_MOSI/I2S2_SD and RTC_REFIN alternate functions. |
| 29 | PA8 | bidirectional | 5 V tolerant I/O (FTf, FM+ capable) with MCO, USB_CRS_SYNC, EVENTOUT, USART1_CK and I2C3_SCL alternate functions. |
| 30 | PA9 | bidirectional | 5 V tolerant I/O (FTf, FM+ capable) with MCO, TSC_G4_IO1, USART1_TX, I2C1_SCL and I2C3_SMBA alternate functions. |
| 31 | PA10 | bidirectional | 5 V tolerant I/O (FTf, FM+ capable) with TSC_G4_IO2, USART1_RX and I2C1_SDA alternate functions. |
| 32 | PA11 | bidirectional | 5 V tolerant I/O (FT) powered by VDD_USB, with SPI1_MISO, EVENTOUT, TSC_G4_IO3, USART1_CTS and COMP1_OUT alternate functions, plus USB_DM. |
| 33 | PA12 | bidirectional | 5 V tolerant I/O (FT) powered by VDD_USB, with SPI1_MOSI, EVENTOUT, TSC_G4_IO4, USART1_RTS/USART1_DE and COMP2_OUT alternate functions, plus USB_DP. |
| 34 | PA13 | bidirectional | 5 V tolerant I/O (FT) with SWDIO, USB_NOE and LPUART1_RX alternate functions. |
| 35 | VSS | power_in | Ground pin. |
| 36 | VDD_USB | power_in | Power supply pin for the I/O pins PA11 and PA12 (USB pins); for characteristics referring to VDD, VDD_USB must be used instead. |
| 37 | PA14 | bidirectional | 5 V tolerant I/O (FT) with SWCLK, USART2_TX and LPUART1_TX alternate functions. |
| 38 | PA15 | bidirectional | 5 V tolerant I/O (FT) with SPI1_NSS, TIM2_ETR, EVENTOUT, USART2_RX, TIM2_CH1 and USART4_RTS/USART4_DE alternate functions. |
| 39 | PB3 | bidirectional | 5 V tolerant I/O (FT) with SPI1_SCK, TIM2_CH2, TSC_G5_IO1, EVENTOUT, USART1_RTS/USART1_DE and USART5_TX alternate functions, plus COMP2_INM. |
| 40 | PB4 | bidirectional | 5 V tolerant I/O (FTf, FM+ capable) with SPI1_MISO, TIM3_CH1, TSC_G5_IO2, TIM22_CH1, USART1_CTS, USART5_RX and I2C3_SDA alternate functions, plus COMP2_INP. |
| 41 | PB5 | bidirectional | 5 V tolerant I/O (FT) with SPI1_MOSI, LPTIM1_IN1, I2C1_SMBA, TIM3_CH2/TIM22_CH2, USART1_CK, USART5_CK and USART5_RTS/USART5_DE alternate functions, plus COMP2_INP. |
| 42 | PB6 | bidirectional | 5 V tolerant I/O (FTf, FM+ capable) with USART1_TX, I2C1_SCL, LPTIM1_ETR and TSC_G5_IO3 alternate functions, plus COMP2_INP. |
| 43 | PB7 | bidirectional | 5 V tolerant I/O (FTf, FM+ capable) with USART1_RX, I2C1_SDA, LPTIM1_IN2, TSC_G5_IO4 and USART4_CTS alternate functions, plus COMP2_INP and VREF_PVD_IN. |
| 44 | BOOT0 | input | Dedicated BOOT0 pin used to select the boot mode. |
| 45 | PB8 | bidirectional | 5 V tolerant I/O (FTf, FM+ capable) with TSC_SYNC and I2C1_SCL alternate functions. |
| 46 | PB9 | bidirectional | 5 V tolerant I/O (FTf, FM+ capable) with EVENTOUT, I2C1_SDA and SPI2_NSS/I2S2_WS alternate functions. |
| 47 | VSS | power_in | Ground pin. |
| 48 | VDD | power_in | Power supply pin for the device, specified from 1.65 V to 3.6 V in the datasheet. |
| 49 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | UFQFPN-48(7x7) |
| Category | Embedded Processors & Controllers |
| Pins | 49 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| External main supply voltage (VDD-VSS) | VDD-VSS | -0.3 | 4 | V | 62 | ||
| Input voltage on any other pin | VIN | 4 | V | 62 | |||
| Injected current on FT, FTf, RST and B pins | IINJ(PIN) | -5 | 0 | mA | 63 | ||
| Injected current on TC pin | IINJ(PIN) | -5 | 5 | mA | 63 | ||
| Total injected current (sum of all I/O and control pins) | ΣIINJ(PIN) | -25 | 25 | mA | absolute sum of positive and negative injected currents | 63 | |
| Total current into sum of all VDD power lines (source) | ΣIVDD | 105 | mA | 63 | |||
| Total current out of sum of all VSS ground lines (sink) | ΣIVSS | 105 | mA | 63 | |||
| Total current into VDD_USB power lines (source) | ΣIVDD_USB | 25 | mA | 63 | |||
| Maximum current into each VDD power pin (source) | IVDD(PIN) | 100 | mA | 63 | |||
| Maximum current out of each VSS ground pin (sink) | IVSS(PIN) | 100 | mA | 63 | |||
| Output current sunk by any I/O and control pin except FTf pins | IIO | 16 | mA | 63 | |||
| Output current sunk by FTf pins | IIO | 22 | mA | 63 | |||
| Output current sourced by any I/O and control pin | IIO | -16 | mA | 63 | |||
| Total output current sunk by sum of all IOs and control pins except PA11 and PA12 | ΣIIO(PIN) | 90 | mA | 63 | |||
| Total output current sunk by PA11 and PA12 | ΣIIO(PIN) | 25 | mA | 63 | |||
| Total output current sourced by sum of all IOs and control pins | ΣIIO(PIN) | -90 | mA | 63 | |||
| Storage temperature range | TSTG | -65 | 150 | °C | 63 | ||
| Maximum junction temperature | TJ | 150 | °C | 63 | |||
| Internal AHB clock frequency | fHCLK | 0 | 32 | MHz | 64 | ||
| Internal APB1 clock frequency | fPCLK1 | 0 | 32 | MHz | 64 | ||
| Standard operating voltage | VDD | 1.65 | 3.6 | V | BOR detector disabled | 64 | |
| Standard operating voltage | VDD | 1.8 | 3.6 | V | BOR detector enabled, at power-on | 64 | |
| Analog operating voltage (DAC not used) | VDDA | 1.65 | 3.6 | V | Must be the same voltage as VDD | 64 | |
| Analog operating voltage (all features) | VDDA | 1.8 | 3.6 | V | Must be the same voltage as VDD | 64 | |
| Standard operating voltage, USB domain | VDD_USB | 3 | 3.6 | V | USB peripheral used | 64 | |
| Standard operating voltage, USB domain | VDD_USB | 0 | 3.6 | V | USB peripheral not used | 64 | |
| Input voltage on FT, FTf and RST pins | VIN | -0.3 | 5.5 | V | 2.0 V ≤ VDD ≤ 3.6 V | 64 | |
| Input voltage on FT, FTf and RST pins | VIN | -0.3 | 5.2 | V | 1.65 V ≤ VDD ≤ 2.0 V | 64 | |
| Input voltage on BOOT0 pin | VIN | 0 | 5.5 | V | 64 | ||
| Input voltage on TC pin | VIN | -0.3 | V | 64 | |||
| Power dissipation UFQFPN48 package | PD | 714 | mW | TA = 85 °C (range 6) | 65 | ||
| Power dissipation UFQFPN48 package | PD | 179 | mW | TA = 125 °C (range 3) | 65 | ||
| Temperature range, maximum power dissipation (range 6) | TA | -40 | 85 | °C | 65 | ||
| Temperature range, maximum power dissipation (range 7) | TA | -40 | 105 | °C | 65 | ||
| Temperature range, maximum power dissipation (range 3) | TA | -40 | 125 | °C | 65 | ||
| Junction temperature range (range 6) | TJ | -40 | 105 | °C | -40 °C ≤ TA ≤ 85 °C | 65 | |
| Junction temperature range (range 7) | TJ | -40 | 125 | °C | -40 °C ≤ TA ≤ 105 °C | 65 | |
| Junction temperature range (range 3) | TJ | -40 | 130 | °C | -40 °C ≤ TA ≤ 125 °C | 65 | |
| Power-on/power down reset threshold, falling edge | VPOR/PDR | 1 | 1.5 | 1.65 | V | Falling edge | 66 |
| Power-on/power down reset threshold, rising edge | VPOR/PDR | 1.3 | 1.5 | 1.65 | V | Rising edge | 66 |
| Brown-out reset threshold 0, falling edge | VBOR0 | 1.67 | 1.7 | 1.74 | V | Falling edge | 66 |
| Brown-out reset threshold 0, rising edge | VBOR0 | 1.69 | 1.76 | 1.8 | V | Rising edge | 66 |
| Internal reference voltage | VREFINT out | 1.202 | 1.224 | 1.242 | V | -40 °C < TJ < +125 °C | 67 |
| Internal reference startup time | TVREFINT | 2 | 3 | ms | 67 | ||
| Temperature coefficient | TCoeff | 25 | 100 | ppm/°C | -40 °C < TJ < +125 °C | 67 | |
| Long-term stability | ACoeff | 1000 | ppm | 1000 hours, T= 25 °C | 67 | ||
| Voltage coefficient | VDDCoeff | 2000 | ppm/V | 3.0 V < VDDA < 3.6 V | 67 | ||
| Supply current in Run mode, code from Flash, fHCLK 1 MHz | IDD (Run from Flash memory) | 190 | 250 | µA | Range3, Vcore=1.2 V VOS[1:0]=11 | 69 | |
| Supply current in Run mode, code from Flash, fHCLK 2 MHz | IDD (Run from Flash memory) | 345 | 380 | µA | Range3, Vcore=1.2 V VOS[1:0]=11 | 69 | |
| Supply current in Run mode, code from Flash, fHCLK 4 MHz | IDD (Run from Flash memory) | 650 | 670 | µA | Range3, Vcore=1.2 V VOS[1:0]=11 | 69 | |
| Supply current in Standby mode, IWDG and LSI OFF | IDD (Standby) | 2.6 | 7 | µA | TA = 125 °C | 77 | |
| Wakeup time from Stop mode, regulator in Run mode, fHCLK = fMSI = 4.2 MHz | tWUSTOP | 5 | 8 | µs | 82 | ||
| Wakeup time from Standby mode, FWU bit = 0 | tWUSTDBY | 2.2 | 3 | ms | fHCLK = MSI = 2.1 MHz | 82 | |
| High-speed external user clock source frequency | fHSE_ext | 1 | 8 | 32 | MHz | CSS is ON or PLL is used | 83 |
| Low-speed external user clock source frequency | fLSE_ext | 1 | 32.768 | 1000 | kHz | 84 | |
| Oscillator frequency (HSE crystal/resonator) | fOSC_IN | 1 | 25 | MHz | 85 | ||
| Startup time (HSE) | tSU(HSE) | 2 | ms | VDD is stabilized | 85 | ||
| LSE oscillator frequency | fLSE | 32.768 | kHz | 86 | |||
| HSI16 frequency | fHSI16 | 16 | MHz | VDD = 3.0 V | 87 | ||
| Accuracy of factory-calibrated HSI16 oscillator | ACCHSI16 | -1.5 | 1.5 | % | VDDA = 3.0 V, TA = 0 to 55 °C | 87 | |
| Accuracy of factory-calibrated HSI16 oscillator | ACCHSI16 | -5.45 | 3.25 | % | VDDA = 1.65 V to 3.6 V, TA = − 40 to 125 °C | 87 | |
| HSI48 frequency | fHSI48 | 48 | MHz | 88 | |||
| HSI48 oscillator power consumption | IDDA(HSI48) | 330 | 380 | µA | 88 | ||
| LSI oscillator frequency | fLSI | 26 | 38 | 56 | kHz | Guaranteed by test in production | 88 |
| LSI oscillator frequency drift | DLSI | -10 | 4 | % | 0°C ≤ TA ≤ 85°C | 88 | |
| MSI frequency error after factory calibration | ACCMSI | -0.5 | 0.5 | % | 89 | ||
| MSI oscillator frequency drift voltage coefficient | DVOLT(MSI) | 2.5 | %/V | 1.65 V ≤ VDD ≤ 3.6 V, TA = 25 °C | 89 | ||
| PLL input clock | fPLL_IN | 2 | 24 | MHz | 90 | ||
| PLL output clock | fPLL_OUT | 2 | 32 | MHz | 90 | ||
| PLL lock time | tLOCK | 115 | 160 | µs | PLL input = 16 MHz, PLL VCO = 96 MHz | 90 | |
| Current consumption on VDDA (PLL) | IDDA(PLL) | 220 | 450 | µA | 90 | ||
| Current consumption on VDD (PLL) | IDD(PLL) | 120 | 150 | µA | 90 | ||
| Data retention mode (RAM and hardware registers) | VRM | 1.65 | V | STOP mode (or RESET) | 91 | ||
| Flash memory and data EEPROM operating voltage | VDD | 1.65 | 3.6 | V | Read / Write / Erase | 91 | |
| Erasing time for word or half-page | tprog | 3.28 | 3.94 | ms | Erasing | 91 | |
| Average current during programming/erase operation | IDD | 500 | 700 | µA | TA = 25 °C, VDD = 3.6 V | 91 | |
| Program memory cycling (erase/write) | NCYC | 10 | kcycles | TA = -40°C to 105 °C | 92 | ||
| EEPROM data memory cycling (erase/write) | NCYC | 100 | kcycles | TA = -40°C to 105 °C | 92 | ||
| Data retention (program memory) after 10 kcycles | tRET | 30 | years | TRET = +85 °C | 92 | ||
| Data retention (program memory) after 10 kcycles | tRET | 10 | years | TRET = +105 °C | 92 |
CAD (KiCad official)
- Symbol:
STM32L072CZU6 - Footprint:
Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm - 3D model: UFQFPN-48(7x7) (KiCad packages3D, STEP)
- 3D model files:
stm32l072czu6-etched.step/stm32l072czu6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32l072czu6.step/stm32l072czu6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (160 pp, sha256
13ea53054244ac9d, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# STM32L072CZU6
**STMicroelectronics** · Microcontrollers (MCU/MPU/SOC) · UFQFPN-48(7x7)
STM32L072CZU6 from STMicroelectronics, in a UFQFPN-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Power supply pin for the device, specified from 1.65 V to 3.6 V in the datasheet. |
| 2 | PC13 | bidirectional | General-purpose 5 V tolerant I/O (FT) with RTC_TAMP1, RTC_TS, RTC_OUT and WKUP2 additional functions. |
| 3 | PC14-OSC32_IN | bidirectional | 5 V tolerant I/O (FT) that can be used as the OSC32_IN low-speed oscillator input. |
| 4 | PC15-OSC32_OUT | bidirectional | 3.3 V standard I/O (TC) that can be used as the OSC32_OUT low-speed oscillator output. |
| 5 | PH0-OSC_IN | bidirectional | 3.3 V standard I/O (TC) that can be used as the OSC_IN high-speed oscillator input, with USB_CRS_SYNC alternate function. |
| 6 | PH1-OSC_OUT | bidirectional | 3.3 V standard I/O (TC) that can be used as the OSC_OUT high-speed oscillator output. |
| 7 | NRST | bidirectional | Bidirectional reset pin with embedded weak pull-up resistor. |
| 8 | VSSA | power_in | Analog ground reference pin. |
| 9 | VDDA | power_in | Analog power supply pin. |
| 10 | PA0 | bidirectional | I/O pin with TIM2_CH1, TSC_G1_IO1, USART2_CTS, TIM2_ETR, USART4_TX and COMP1_OUT alternate functions, plus COMP1_INM, ADC_IN0 and RTC_TAMP2/WKUP1 additional functions. |
| 11 | PA1 | bidirectional | 5 V tolerant I/O (FT) with EVENTOUT, TIM2_CH2, TSC_G1_IO2, USART2_RTS/USART2_DE, TIM21_ETR and USART4_RX alternate functions, plus COMP1_INP and ADC_IN1. |
| 12 | PA2 | bidirectional | 5 V tolerant I/O (FT) with TIM21_CH1, TIM2_CH3, TSC_G1_IO3, USART2_TX, LPUART1_TX and COMP2_OUT alternate functions, plus COMP2_INM and ADC_IN2. |
| 13 | PA3 | bidirectional | 5 V tolerant I/O (FT) with TIM21_CH2, TIM2_CH4, TSC_G1_IO4, USART2_RX and LPUART1_RX alternate functions, plus COMP2_INP and ADC_IN3. |
| 14 | PA4 | bidirectional | 3.3 V standard I/O (TC) with SPI1_NSS, TSC_G2_IO1, USART2_CK and TIM22_ETR alternate functions, plus COMP1_INM, COMP2_INM, ADC_IN4 and DAC_OUT1; it offers reduced touch sensing sensitivity. |
| 15 | PA5 | bidirectional | 3.3 V standard I/O (TC) with SPI1_SCK, TIM2_ETR, TSC_G2_IO2 and TIM2_CH1 alternate functions, plus COMP1_INM, COMP2_INM, ADC_IN5 and DAC_OUT2. |
| 16 | PA6 | bidirectional | 5 V tolerant I/O (FT) with SPI1_MISO, TIM3_CH1, TSC_G2_IO3, LPUART1_CTS, TIM22_CH1, EVENTOUT and COMP1_OUT alternate functions, plus ADC_IN6. |
| 17 | PA7 | bidirectional | 5 V tolerant I/O (FT) with SPI1_MOSI, TIM3_CH2, TSC_G2_IO4, TIM22_CH2, EVENTOUT and COMP2_OUT alternate functions, plus ADC_IN7. |
| 18 | PB0 | bidirectional | 5 V tolerant I/O (FT) with EVENTOUT, TIM3_CH3 and TSC_G3_IO2 alternate functions, plus ADC_IN8 and VREF_OUT. |
| 19 | PB1 | bidirectional | 5 V tolerant I/O (FT) with TIM3_CH4, TSC_G3_IO3 and LPUART1_RTS/LPUART1_DE alternate functions, plus ADC_IN9 and VREF_OUT. |
| 20 | PB2 | bidirectional | 5 V tolerant I/O (FT) with LPTIM1_OUT, TSC_G3_IO4 and I2C3_SMBA alternate functions. |
| 21 | PB10 | bidirectional | 5 V tolerant I/O (FT) with TIM2_CH3, TSC_SYNC, LPUART1_TX, SPI2_SCK, I2C2_SCL and LPUART1_RX alternate functions. |
| 22 | PB11 | bidirectional | 5 V tolerant I/O (FT) with EVENTOUT, TIM2_CH4, TSC_G6_IO1, LPUART1_RX, I2C2_SDA and LPUART1_TX alternate functions. |
| 23 | VSS | power_in | Ground pin. |
| 24 | VDD | power_in | Power supply pin for the device, specified from 1.65 V to 3.6 V in the datasheet. |
| 25 | PB12 | bidirectional | 5 V tolerant I/O (FT) with SPI2_NSS/I2S2_WS, LPUART1_RTS/LPUART1_DE, TSC_G6_IO2, I2C2_SMBA and EVENTOUT alternate functions. |
| 26 | PB13 | bidirectional | 5 V tolerant I/O (FTf, FM+ capable) with SPI2_SCK/I2S2_CK, MCO, TSC_G6_IO3, LPUART1_CTS, I2C2_SCL and TIM21_CH1 alternate functions. |
| 27 | PB14 | bidirectional | 5 V tolerant I/O (FTf, FM+ capable) with SPI2_MISO/I2S2_MCK, RTC_OUT, TSC_G6_IO4, LPUART1_RTS/LPUART1_DE, I2C2_SDA and TIM21_CH2 alternate functions. |
| 28 | PB15 | bidirectional | 5 V tolerant I/O (FT) with SPI2_MOSI/I2S2_SD and RTC_REFIN alternate functions. |
| 29 | PA8 | bidirectional | 5 V tolerant I/O (FTf, FM+ capable) with MCO, USB_CRS_SYNC, EVENTOUT, USART1_CK and I2C3_SCL alternate functions. |
| 30 | PA9 | bidirectional | 5 V tolerant I/O (FTf, FM+ capable) with MCO, TSC_G4_IO1, USART1_TX, I2C1_SCL and I2C3_SMBA alternate functions. |
| 31 | PA10 | bidirectional | 5 V tolerant I/O (FTf, FM+ capable) with TSC_G4_IO2, USART1_RX and I2C1_SDA alternate functions. |
| 32 | PA11 | bidirectional | 5 V tolerant I/O (FT) powered by VDD_USB, with SPI1_MISO, EVENTOUT, TSC_G4_IO3, USART1_CTS and COMP1_OUT alternate functions, plus USB_DM. |
| 33 | PA12 | bidirectional | 5 V tolerant I/O (FT) powered by VDD_USB, with SPI1_MOSI, EVENTOUT, TSC_G4_IO4, USART1_RTS/USART1_DE and COMP2_OUT alternate functions, plus USB_DP. |
| 34 | PA13 | bidirectional | 5 V tolerant I/O (FT) with SWDIO, USB_NOE and LPUART1_RX alternate functions. |
| 35 | VSS | power_in | Ground pin. |
| 36 | VDD_USB | power_in | Power supply pin for the I/O pins PA11 and PA12 (USB pins); for characteristics referring to VDD, VDD_USB must be used instead. |
| 37 | PA14 | bidirectional | 5 V tolerant I/O (FT) with SWCLK, USART2_TX and LPUART1_TX alternate functions. |
| 38 | PA15 | bidirectional | 5 V tolerant I/O (FT) with SPI1_NSS, TIM2_ETR, EVENTOUT, USART2_RX, TIM2_CH1 and USART4_RTS/USART4_DE alternate functions. |
| 39 | PB3 | bidirectional | 5 V tolerant I/O (FT) with SPI1_SCK, TIM2_CH2, TSC_G5_IO1, EVENTOUT, USART1_RTS/USART1_DE and USART5_TX alternate functions, plus COMP2_INM. |
| 40 | PB4 | bidirectional | 5 V tolerant I/O (FTf, FM+ capable) with SPI1_MISO, TIM3_CH1, TSC_G5_IO2, TIM22_CH1, USART1_CTS, USART5_RX and I2C3_SDA alternate functions, plus COMP2_INP. |
| 41 | PB5 | bidirectional | 5 V tolerant I/O (FT) with SPI1_MOSI, LPTIM1_IN1, I2C1_SMBA, TIM3_CH2/TIM22_CH2, USART1_CK, USART5_CK and USART5_RTS/USART5_DE alternate functions, plus COMP2_INP. |
| 42 | PB6 | bidirectional | 5 V tolerant I/O (FTf, FM+ capable) with USART1_TX, I2C1_SCL, LPTIM1_ETR and TSC_G5_IO3 alternate functions, plus COMP2_INP. |
| 43 | PB7 | bidirectional | 5 V tolerant I/O (FTf, FM+ capable) with USART1_RX, I2C1_SDA, LPTIM1_IN2, TSC_G5_IO4 and USART4_CTS alternate functions, plus COMP2_INP and VREF_PVD_IN. |
| 44 | BOOT0 | input | Dedicated BOOT0 pin used to select the boot mode. |
| 45 | PB8 | bidirectional | 5 V tolerant I/O (FTf, FM+ capable) with TSC_SYNC and I2C1_SCL alternate functions. |
| 46 | PB9 | bidirectional | 5 V tolerant I/O (FTf, FM+ capable) with EVENTOUT, I2C1_SDA and SPI2_NSS/I2S2_WS alternate functions. |
| 47 | VSS | power_in | Ground pin. |
| 48 | VDD | power_in | Power supply pin for the device, specified from 1.65 V to 3.6 V in the datasheet. |
| 49 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | UFQFPN-48(7x7) |
| Category | Embedded Processors & Controllers |
| Pins | 49 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| External main supply voltage (VDD-VSS) | VDD-VSS | -0.3 | | 4 | V | | 62 |
| Input voltage on any other pin | VIN | | | 4 | V | | 62 |
| Injected current on FT, FTf, RST and B pins | IINJ(PIN) | -5 | | 0 | mA | | 63 |
| Injected current on TC pin | IINJ(PIN) | -5 | | 5 | mA | | 63 |
| Total injected current (sum of all I/O and control pins) | ΣIINJ(PIN) | -25 | | 25 | mA | absolute sum of positive and negative injected currents | 63 |
| Total current into sum of all VDD power lines (source) | ΣIVDD | | | 105 | mA | | 63 |
| Total current out of sum of all VSS ground lines (sink) | ΣIVSS | | | 105 | mA | | 63 |
| Total current into VDD_USB power lines (source) | ΣIVDD_USB | | | 25 | mA | | 63 |
| Maximum current into each VDD power pin (source) | IVDD(PIN) | | | 100 | mA | | 63 |
| Maximum current out of each VSS ground pin (sink) | IVSS(PIN) | | | 100 | mA | | 63 |
| Output current sunk by any I/O and control pin except FTf pins | IIO | | | 16 | mA | | 63 |
| Output current sunk by FTf pins | IIO | | | 22 | mA | | 63 |
| Output current sourced by any I/O and control pin | IIO | | | -16 | mA | | 63 |
| Total output current sunk by sum of all IOs and control pins except PA11 and PA12 | ΣIIO(PIN) | | | 90 | mA | | 63 |
| Total output current sunk by PA11 and PA12 | ΣIIO(PIN) | | | 25 | mA | | 63 |
| Total output current sourced by sum of all IOs and control pins | ΣIIO(PIN) | | | -90 | mA | | 63 |
| Storage temperature range | TSTG | -65 | | 150 | °C | | 63 |
| Maximum junction temperature | TJ | | | 150 | °C | | 63 |
| Internal AHB clock frequency | fHCLK | 0 | | 32 | MHz | | 64 |
| Internal APB1 clock frequency | fPCLK1 | 0 | | 32 | MHz | | 64 |
| Standard operating voltage | VDD | 1.65 | | 3.6 | V | BOR detector disabled | 64 |
| Standard operating voltage | VDD | 1.8 | | 3.6 | V | BOR detector enabled, at power-on | 64 |
| Analog operating voltage (DAC not used) | VDDA | 1.65 | | 3.6 | V | Must be the same voltage as VDD | 64 |
| Analog operating voltage (all features) | VDDA | 1.8 | | 3.6 | V | Must be the same voltage as VDD | 64 |
| Standard operating voltage, USB domain | VDD_USB | 3 | | 3.6 | V | USB peripheral used | 64 |
| Standard operating voltage, USB domain | VDD_USB | 0 | | 3.6 | V | USB peripheral not used | 64 |
| Input voltage on FT, FTf and RST pins | VIN | -0.3 | | 5.5 | V | 2.0 V ≤ VDD ≤ 3.6 V | 64 |
| Input voltage on FT, FTf and RST pins | VIN | -0.3 | | 5.2 | V | 1.65 V ≤ VDD ≤ 2.0 V | 64 |
| Input voltage on BOOT0 pin | VIN | 0 | | 5.5 | V | | 64 |
| Input voltage on TC pin | VIN | -0.3 | | | V | | 64 |
| Power dissipation UFQFPN48 package | PD | | | 714 | mW | TA = 85 °C (range 6) | 65 |
| Power dissipation UFQFPN48 package | PD | | | 179 | mW | TA = 125 °C (range 3) | 65 |
| Temperature range, maximum power dissipation (range 6) | TA | -40 | | 85 | °C | | 65 |
| Temperature range, maximum power dissipation (range 7) | TA | -40 | | 105 | °C | | 65 |
| Temperature range, maximum power dissipation (range 3) | TA | -40 | | 125 | °C | | 65 |
| Junction temperature range (range 6) | TJ | -40 | | 105 | °C | -40 °C ≤ TA ≤ 85 °C | 65 |
| Junction temperature range (range 7) | TJ | -40 | | 125 | °C | -40 °C ≤ TA ≤ 105 °C | 65 |
| Junction temperature range (range 3) | TJ | -40 | | 130 | °C | -40 °C ≤ TA ≤ 125 °C | 65 |
| Power-on/power down reset threshold, falling edge | VPOR/PDR | 1 | 1.5 | 1.65 | V | Falling edge | 66 |
| Power-on/power down reset threshold, rising edge | VPOR/PDR | 1.3 | 1.5 | 1.65 | V | Rising edge | 66 |
| Brown-out reset threshold 0, falling edge | VBOR0 | 1.67 | 1.7 | 1.74 | V | Falling edge | 66 |
| Brown-out reset threshold 0, rising edge | VBOR0 | 1.69 | 1.76 | 1.8 | V | Rising edge | 66 |
| Internal reference voltage | VREFINT out | 1.202 | 1.224 | 1.242 | V | -40 °C < TJ < +125 °C | 67 |
| Internal reference startup time | TVREFINT | | 2 | 3 | ms | | 67 |
| Temperature coefficient | TCoeff | | 25 | 100 | ppm/°C | -40 °C < TJ < +125 °C | 67 |
| Long-term stability | ACoeff | | | 1000 | ppm | 1000 hours, T= 25 °C | 67 |
| Voltage coefficient | VDDCoeff | | | 2000 | ppm/V | 3.0 V < VDDA < 3.6 V | 67 |
| Supply current in Run mode, code from Flash, fHCLK 1 MHz | IDD (Run from Flash memory) | | 190 | 250 | µA | Range3, Vcore=1.2 V VOS[1:0]=11 | 69 |
| Supply current in Run mode, code from Flash, fHCLK 2 MHz | IDD (Run from Flash memory) | | 345 | 380 | µA | Range3, Vcore=1.2 V VOS[1:0]=11 | 69 |
| Supply current in Run mode, code from Flash, fHCLK 4 MHz | IDD (Run from Flash memory) | | 650 | 670 | µA | Range3, Vcore=1.2 V VOS[1:0]=11 | 69 |
| Supply current in Standby mode, IWDG and LSI OFF | IDD (Standby) | | 2.6 | 7 | µA | TA = 125 °C | 77 |
| Wakeup time from Stop mode, regulator in Run mode, fHCLK = fMSI = 4.2 MHz | tWUSTOP | | 5 | 8 | µs | | 82 |
| Wakeup time from Standby mode, FWU bit = 0 | tWUSTDBY | | 2.2 | 3 | ms | fHCLK = MSI = 2.1 MHz | 82 |
| High-speed external user clock source frequency | fHSE_ext | 1 | 8 | 32 | MHz | CSS is ON or PLL is used | 83 |
| Low-speed external user clock source frequency | fLSE_ext | 1 | 32.768 | 1000 | kHz | | 84 |
| Oscillator frequency (HSE crystal/resonator) | fOSC_IN | 1 | | 25 | MHz | | 85 |
| Startup time (HSE) | tSU(HSE) | | 2 | | ms | VDD is stabilized | 85 |
| LSE oscillator frequency | fLSE | | 32.768 | | kHz | | 86 |
| HSI16 frequency | fHSI16 | | 16 | | MHz | VDD = 3.0 V | 87 |
| Accuracy of factory-calibrated HSI16 oscillator | ACCHSI16 | -1.5 | | 1.5 | % | VDDA = 3.0 V, TA = 0 to 55 °C | 87 |
| Accuracy of factory-calibrated HSI16 oscillator | ACCHSI16 | -5.45 | | 3.25 | % | VDDA = 1.65 V to 3.6 V, TA = − 40 to 125 °C | 87 |
| HSI48 frequency | fHSI48 | | 48 | | MHz | | 88 |
| HSI48 oscillator power consumption | IDDA(HSI48) | | 330 | 380 | µA | | 88 |
| LSI oscillator frequency | fLSI | 26 | 38 | 56 | kHz | Guaranteed by test in production | 88 |
| LSI oscillator frequency drift | DLSI | -10 | | 4 | % | 0°C ≤ TA ≤ 85°C | 88 |
| MSI frequency error after factory calibration | ACCMSI | -0.5 | | 0.5 | % | | 89 |
| MSI oscillator frequency drift voltage coefficient | DVOLT(MSI) | | | 2.5 | %/V | 1.65 V ≤ VDD ≤ 3.6 V, TA = 25 °C | 89 |
| PLL input clock | fPLL_IN | 2 | | 24 | MHz | | 90 |
| PLL output clock | fPLL_OUT | 2 | | 32 | MHz | | 90 |
| PLL lock time | tLOCK | | 115 | 160 | µs | PLL input = 16 MHz, PLL VCO = 96 MHz | 90 |
| Current consumption on VDDA (PLL) | IDDA(PLL) | | 220 | 450 | µA | | 90 |
| Current consumption on VDD (PLL) | IDD(PLL) | | 120 | 150 | µA | | 90 |
| Data retention mode (RAM and hardware registers) | VRM | 1.65 | | | V | STOP mode (or RESET) | 91 |
| Flash memory and data EEPROM operating voltage | VDD | 1.65 | | 3.6 | V | Read / Write / Erase | 91 |
| Erasing time for word or half-page | tprog | | 3.28 | 3.94 | ms | Erasing | 91 |
| Average current during programming/erase operation | IDD | | 500 | 700 | µA | TA = 25 °C, VDD = 3.6 V | 91 |
| Program memory cycling (erase/write) | NCYC | 10 | | | kcycles | TA = -40°C to 105 °C | 92 |
| EEPROM data memory cycling (erase/write) | NCYC | 100 | | | kcycles | TA = -40°C to 105 °C | 92 |
| Data retention (program memory) after 10 kcycles | tRET | 30 | | | years | TRET = +85 °C | 92 |
| Data retention (program memory) after 10 kcycles | tRET | 10 | | | years | TRET = +105 °C | 92 |
## CAD (KiCad official)
- Symbol: `STM32L072CZU6`
- Footprint: `Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm`
- 3D model: UFQFPN-48(7x7) (KiCad packages3D, STEP)
- 3D model files: `stm32l072czu6-etched.step` / `stm32l072czu6-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32l072czu6.step` / `stm32l072czu6.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [STMicroelectronics datasheet](https://www.st.com/resource/en/datasheet/stm32l072czu6.pdf) (160 pp, sha256 `13ea53054244ac9d`, retrieved 2026-11-05, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/stm32l072czu6-datasheet.pdf)