main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers stm32l072czu6: viewers · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
stm32l072czu6-etched.glb Publish 0.1.0 · Ray
stm32l072czu6-etched.step stm32l072czu6: factory component page (tier=mfr) · Ray
stm32l072czu6-hero.glb stm32l072czu6: hero GLB from the etched model (keeps the MPN mark) · Ray
stm32l072czu6-hero.overlay.json Publish 0.1.0 · Ray
stm32l072czu6.glb Publish 0.1.0 · Ray
stm32l072czu6.kicad_mod Publish 0.1.0 · Ray
stm32l072czu6.kicad_sym Publish 0.1.0 · Ray
stm32l072czu6.lbr Publish 0.1.0 · Ray
stm32l072czu6.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 49 pins · Ray

STM32L072CZU6

STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · UFQFPN-48(7x7)

STM32L072CZU6 from STMicroelectronics, in a UFQFPN-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Power supply pin for the device, specified from 1.65 V to 3.6 V in the datasheet.
2 PC13 bidirectional General-purpose 5 V tolerant I/O (FT) with RTC_TAMP1, RTC_TS, RTC_OUT and WKUP2 additional functions.
3 PC14-OSC32_IN bidirectional 5 V tolerant I/O (FT) that can be used as the OSC32_IN low-speed oscillator input.
4 PC15-OSC32_OUT bidirectional 3.3 V standard I/O (TC) that can be used as the OSC32_OUT low-speed oscillator output.
5 PH0-OSC_IN bidirectional 3.3 V standard I/O (TC) that can be used as the OSC_IN high-speed oscillator input, with USB_CRS_SYNC alternate function.
6 PH1-OSC_OUT bidirectional 3.3 V standard I/O (TC) that can be used as the OSC_OUT high-speed oscillator output.
7 NRST bidirectional Bidirectional reset pin with embedded weak pull-up resistor.
8 VSSA power_in Analog ground reference pin.
9 VDDA power_in Analog power supply pin.
10 PA0 bidirectional I/O pin with TIM2_CH1, TSC_G1_IO1, USART2_CTS, TIM2_ETR, USART4_TX and COMP1_OUT alternate functions, plus COMP1_INM, ADC_IN0 and RTC_TAMP2/WKUP1 additional functions.
11 PA1 bidirectional 5 V tolerant I/O (FT) with EVENTOUT, TIM2_CH2, TSC_G1_IO2, USART2_RTS/USART2_DE, TIM21_ETR and USART4_RX alternate functions, plus COMP1_INP and ADC_IN1.
12 PA2 bidirectional 5 V tolerant I/O (FT) with TIM21_CH1, TIM2_CH3, TSC_G1_IO3, USART2_TX, LPUART1_TX and COMP2_OUT alternate functions, plus COMP2_INM and ADC_IN2.
13 PA3 bidirectional 5 V tolerant I/O (FT) with TIM21_CH2, TIM2_CH4, TSC_G1_IO4, USART2_RX and LPUART1_RX alternate functions, plus COMP2_INP and ADC_IN3.
14 PA4 bidirectional 3.3 V standard I/O (TC) with SPI1_NSS, TSC_G2_IO1, USART2_CK and TIM22_ETR alternate functions, plus COMP1_INM, COMP2_INM, ADC_IN4 and DAC_OUT1; it offers reduced touch sensing sensitivity.
15 PA5 bidirectional 3.3 V standard I/O (TC) with SPI1_SCK, TIM2_ETR, TSC_G2_IO2 and TIM2_CH1 alternate functions, plus COMP1_INM, COMP2_INM, ADC_IN5 and DAC_OUT2.
16 PA6 bidirectional 5 V tolerant I/O (FT) with SPI1_MISO, TIM3_CH1, TSC_G2_IO3, LPUART1_CTS, TIM22_CH1, EVENTOUT and COMP1_OUT alternate functions, plus ADC_IN6.
17 PA7 bidirectional 5 V tolerant I/O (FT) with SPI1_MOSI, TIM3_CH2, TSC_G2_IO4, TIM22_CH2, EVENTOUT and COMP2_OUT alternate functions, plus ADC_IN7.
18 PB0 bidirectional 5 V tolerant I/O (FT) with EVENTOUT, TIM3_CH3 and TSC_G3_IO2 alternate functions, plus ADC_IN8 and VREF_OUT.
19 PB1 bidirectional 5 V tolerant I/O (FT) with TIM3_CH4, TSC_G3_IO3 and LPUART1_RTS/LPUART1_DE alternate functions, plus ADC_IN9 and VREF_OUT.
20 PB2 bidirectional 5 V tolerant I/O (FT) with LPTIM1_OUT, TSC_G3_IO4 and I2C3_SMBA alternate functions.
21 PB10 bidirectional 5 V tolerant I/O (FT) with TIM2_CH3, TSC_SYNC, LPUART1_TX, SPI2_SCK, I2C2_SCL and LPUART1_RX alternate functions.
22 PB11 bidirectional 5 V tolerant I/O (FT) with EVENTOUT, TIM2_CH4, TSC_G6_IO1, LPUART1_RX, I2C2_SDA and LPUART1_TX alternate functions.
23 VSS power_in Ground pin.
24 VDD power_in Power supply pin for the device, specified from 1.65 V to 3.6 V in the datasheet.
25 PB12 bidirectional 5 V tolerant I/O (FT) with SPI2_NSS/I2S2_WS, LPUART1_RTS/LPUART1_DE, TSC_G6_IO2, I2C2_SMBA and EVENTOUT alternate functions.
26 PB13 bidirectional 5 V tolerant I/O (FTf, FM+ capable) with SPI2_SCK/I2S2_CK, MCO, TSC_G6_IO3, LPUART1_CTS, I2C2_SCL and TIM21_CH1 alternate functions.
27 PB14 bidirectional 5 V tolerant I/O (FTf, FM+ capable) with SPI2_MISO/I2S2_MCK, RTC_OUT, TSC_G6_IO4, LPUART1_RTS/LPUART1_DE, I2C2_SDA and TIM21_CH2 alternate functions.
28 PB15 bidirectional 5 V tolerant I/O (FT) with SPI2_MOSI/I2S2_SD and RTC_REFIN alternate functions.
29 PA8 bidirectional 5 V tolerant I/O (FTf, FM+ capable) with MCO, USB_CRS_SYNC, EVENTOUT, USART1_CK and I2C3_SCL alternate functions.
30 PA9 bidirectional 5 V tolerant I/O (FTf, FM+ capable) with MCO, TSC_G4_IO1, USART1_TX, I2C1_SCL and I2C3_SMBA alternate functions.
31 PA10 bidirectional 5 V tolerant I/O (FTf, FM+ capable) with TSC_G4_IO2, USART1_RX and I2C1_SDA alternate functions.
32 PA11 bidirectional 5 V tolerant I/O (FT) powered by VDD_USB, with SPI1_MISO, EVENTOUT, TSC_G4_IO3, USART1_CTS and COMP1_OUT alternate functions, plus USB_DM.
33 PA12 bidirectional 5 V tolerant I/O (FT) powered by VDD_USB, with SPI1_MOSI, EVENTOUT, TSC_G4_IO4, USART1_RTS/USART1_DE and COMP2_OUT alternate functions, plus USB_DP.
34 PA13 bidirectional 5 V tolerant I/O (FT) with SWDIO, USB_NOE and LPUART1_RX alternate functions.
35 VSS power_in Ground pin.
36 VDD_USB power_in Power supply pin for the I/O pins PA11 and PA12 (USB pins); for characteristics referring to VDD, VDD_USB must be used instead.
37 PA14 bidirectional 5 V tolerant I/O (FT) with SWCLK, USART2_TX and LPUART1_TX alternate functions.
38 PA15 bidirectional 5 V tolerant I/O (FT) with SPI1_NSS, TIM2_ETR, EVENTOUT, USART2_RX, TIM2_CH1 and USART4_RTS/USART4_DE alternate functions.
39 PB3 bidirectional 5 V tolerant I/O (FT) with SPI1_SCK, TIM2_CH2, TSC_G5_IO1, EVENTOUT, USART1_RTS/USART1_DE and USART5_TX alternate functions, plus COMP2_INM.
40 PB4 bidirectional 5 V tolerant I/O (FTf, FM+ capable) with SPI1_MISO, TIM3_CH1, TSC_G5_IO2, TIM22_CH1, USART1_CTS, USART5_RX and I2C3_SDA alternate functions, plus COMP2_INP.
41 PB5 bidirectional 5 V tolerant I/O (FT) with SPI1_MOSI, LPTIM1_IN1, I2C1_SMBA, TIM3_CH2/TIM22_CH2, USART1_CK, USART5_CK and USART5_RTS/USART5_DE alternate functions, plus COMP2_INP.
42 PB6 bidirectional 5 V tolerant I/O (FTf, FM+ capable) with USART1_TX, I2C1_SCL, LPTIM1_ETR and TSC_G5_IO3 alternate functions, plus COMP2_INP.
43 PB7 bidirectional 5 V tolerant I/O (FTf, FM+ capable) with USART1_RX, I2C1_SDA, LPTIM1_IN2, TSC_G5_IO4 and USART4_CTS alternate functions, plus COMP2_INP and VREF_PVD_IN.
44 BOOT0 input Dedicated BOOT0 pin used to select the boot mode.
45 PB8 bidirectional 5 V tolerant I/O (FTf, FM+ capable) with TSC_SYNC and I2C1_SCL alternate functions.
46 PB9 bidirectional 5 V tolerant I/O (FTf, FM+ capable) with EVENTOUT, I2C1_SDA and SPI2_NSS/I2S2_WS alternate functions.
47 VSS power_in Ground pin.
48 VDD power_in Power supply pin for the device, specified from 1.65 V to 3.6 V in the datasheet.
49 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package UFQFPN-48(7x7)
Category Embedded Processors & Controllers
Pins 49

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
External main supply voltage (VDD-VSS) VDD-VSS -0.3 4 V 62
Input voltage on any other pin VIN 4 V 62
Injected current on FT, FTf, RST and B pins IINJ(PIN) -5 0 mA 63
Injected current on TC pin IINJ(PIN) -5 5 mA 63
Total injected current (sum of all I/O and control pins) ΣIINJ(PIN) -25 25 mA absolute sum of positive and negative injected currents 63
Total current into sum of all VDD power lines (source) ΣIVDD 105 mA 63
Total current out of sum of all VSS ground lines (sink) ΣIVSS 105 mA 63
Total current into VDD_USB power lines (source) ΣIVDD_USB 25 mA 63
Maximum current into each VDD power pin (source) IVDD(PIN) 100 mA 63
Maximum current out of each VSS ground pin (sink) IVSS(PIN) 100 mA 63
Output current sunk by any I/O and control pin except FTf pins IIO 16 mA 63
Output current sunk by FTf pins IIO 22 mA 63
Output current sourced by any I/O and control pin IIO -16 mA 63
Total output current sunk by sum of all IOs and control pins except PA11 and PA12 ΣIIO(PIN) 90 mA 63
Total output current sunk by PA11 and PA12 ΣIIO(PIN) 25 mA 63
Total output current sourced by sum of all IOs and control pins ΣIIO(PIN) -90 mA 63
Storage temperature range TSTG -65 150 °C 63
Maximum junction temperature TJ 150 °C 63
Internal AHB clock frequency fHCLK 0 32 MHz 64
Internal APB1 clock frequency fPCLK1 0 32 MHz 64
Standard operating voltage VDD 1.65 3.6 V BOR detector disabled 64
Standard operating voltage VDD 1.8 3.6 V BOR detector enabled, at power-on 64
Analog operating voltage (DAC not used) VDDA 1.65 3.6 V Must be the same voltage as VDD 64
Analog operating voltage (all features) VDDA 1.8 3.6 V Must be the same voltage as VDD 64
Standard operating voltage, USB domain VDD_USB 3 3.6 V USB peripheral used 64
Standard operating voltage, USB domain VDD_USB 0 3.6 V USB peripheral not used 64
Input voltage on FT, FTf and RST pins VIN -0.3 5.5 V 2.0 V ≤ VDD ≤ 3.6 V 64
Input voltage on FT, FTf and RST pins VIN -0.3 5.2 V 1.65 V ≤ VDD ≤ 2.0 V 64
Input voltage on BOOT0 pin VIN 0 5.5 V 64
Input voltage on TC pin VIN -0.3 V 64
Power dissipation UFQFPN48 package PD 714 mW TA = 85 °C (range 6) 65
Power dissipation UFQFPN48 package PD 179 mW TA = 125 °C (range 3) 65
Temperature range, maximum power dissipation (range 6) TA -40 85 °C 65
Temperature range, maximum power dissipation (range 7) TA -40 105 °C 65
Temperature range, maximum power dissipation (range 3) TA -40 125 °C 65
Junction temperature range (range 6) TJ -40 105 °C -40 °C ≤ TA ≤ 85 °C 65
Junction temperature range (range 7) TJ -40 125 °C -40 °C ≤ TA ≤ 105 °C 65
Junction temperature range (range 3) TJ -40 130 °C -40 °C ≤ TA ≤ 125 °C 65
Power-on/power down reset threshold, falling edge VPOR/PDR 1 1.5 1.65 V Falling edge 66
Power-on/power down reset threshold, rising edge VPOR/PDR 1.3 1.5 1.65 V Rising edge 66
Brown-out reset threshold 0, falling edge VBOR0 1.67 1.7 1.74 V Falling edge 66
Brown-out reset threshold 0, rising edge VBOR0 1.69 1.76 1.8 V Rising edge 66
Internal reference voltage VREFINT out 1.202 1.224 1.242 V -40 °C < TJ < +125 °C 67
Internal reference startup time TVREFINT 2 3 ms 67
Temperature coefficient TCoeff 25 100 ppm/°C -40 °C < TJ < +125 °C 67
Long-term stability ACoeff 1000 ppm 1000 hours, T= 25 °C 67
Voltage coefficient VDDCoeff 2000 ppm/V 3.0 V < VDDA < 3.6 V 67
Supply current in Run mode, code from Flash, fHCLK 1 MHz IDD (Run from Flash memory) 190 250 µA Range3, Vcore=1.2 V VOS[1:0]=11 69
Supply current in Run mode, code from Flash, fHCLK 2 MHz IDD (Run from Flash memory) 345 380 µA Range3, Vcore=1.2 V VOS[1:0]=11 69
Supply current in Run mode, code from Flash, fHCLK 4 MHz IDD (Run from Flash memory) 650 670 µA Range3, Vcore=1.2 V VOS[1:0]=11 69
Supply current in Standby mode, IWDG and LSI OFF IDD (Standby) 2.6 7 µA TA = 125 °C 77
Wakeup time from Stop mode, regulator in Run mode, fHCLK = fMSI = 4.2 MHz tWUSTOP 5 8 µs 82
Wakeup time from Standby mode, FWU bit = 0 tWUSTDBY 2.2 3 ms fHCLK = MSI = 2.1 MHz 82
High-speed external user clock source frequency fHSE_ext 1 8 32 MHz CSS is ON or PLL is used 83
Low-speed external user clock source frequency fLSE_ext 1 32.768 1000 kHz 84
Oscillator frequency (HSE crystal/resonator) fOSC_IN 1 25 MHz 85
Startup time (HSE) tSU(HSE) 2 ms VDD is stabilized 85
LSE oscillator frequency fLSE 32.768 kHz 86
HSI16 frequency fHSI16 16 MHz VDD = 3.0 V 87
Accuracy of factory-calibrated HSI16 oscillator ACCHSI16 -1.5 1.5 % VDDA = 3.0 V, TA = 0 to 55 °C 87
Accuracy of factory-calibrated HSI16 oscillator ACCHSI16 -5.45 3.25 % VDDA = 1.65 V to 3.6 V, TA = − 40 to 125 °C 87
HSI48 frequency fHSI48 48 MHz 88
HSI48 oscillator power consumption IDDA(HSI48) 330 380 µA 88
LSI oscillator frequency fLSI 26 38 56 kHz Guaranteed by test in production 88
LSI oscillator frequency drift DLSI -10 4 % 0°C ≤ TA ≤ 85°C 88
MSI frequency error after factory calibration ACCMSI -0.5 0.5 % 89
MSI oscillator frequency drift voltage coefficient DVOLT(MSI) 2.5 %/V 1.65 V ≤ VDD ≤ 3.6 V, TA = 25 °C 89
PLL input clock fPLL_IN 2 24 MHz 90
PLL output clock fPLL_OUT 2 32 MHz 90
PLL lock time tLOCK 115 160 µs PLL input = 16 MHz, PLL VCO = 96 MHz 90
Current consumption on VDDA (PLL) IDDA(PLL) 220 450 µA 90
Current consumption on VDD (PLL) IDD(PLL) 120 150 µA 90
Data retention mode (RAM and hardware registers) VRM 1.65 V STOP mode (or RESET) 91
Flash memory and data EEPROM operating voltage VDD 1.65 3.6 V Read / Write / Erase 91
Erasing time for word or half-page tprog 3.28 3.94 ms Erasing 91
Average current during programming/erase operation IDD 500 700 µA TA = 25 °C, VDD = 3.6 V 91
Program memory cycling (erase/write) NCYC 10 kcycles TA = -40°C to 105 °C 92
EEPROM data memory cycling (erase/write) NCYC 100 kcycles TA = -40°C to 105 °C 92
Data retention (program memory) after 10 kcycles tRET 30 years TRET = +85 °C 92
Data retention (program memory) after 10 kcycles tRET 10 years TRET = +105 °C 92

CAD (KiCad official)

  • Symbol: STM32L072CZU6
  • Footprint: Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm
  • 3D model: UFQFPN-48(7x7) (KiCad packages3D, STEP)
  • 3D model files: stm32l072czu6-etched.step / stm32l072czu6-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm32l072czu6.step / stm32l072czu6.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (160 pp, sha256 13ea53054244ac9d, retrieved 2026-11-05, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF