main
History Download
Ray Publish 0.1.0 7f9de73

STM32L071CZT6

STMicroelectronics · ST Microelectronics · LQFP-48(7x7)

STM32L071CZT6 from STMicroelectronics, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Digital power supply pin; the Features list gives the device power supply as 1.65 V to 3.6 V.
2 PC13 bidirectional 5 V tolerant I/O (FT) with additional function RTC_TAMP1/RTC_TS/RTC_OUT/WKUP2.
3 PC14-OSC32_IN bidirectional 5 V tolerant I/O (FT) that doubles as the 32.768 kHz oscillator input OSC32_IN.
4 PC15-OSC32_OUT bidirectional Standard 3.3 V I/O (TC) that doubles as the 32.768 kHz oscillator output OSC32_OUT.
5 PH0-OSC_IN bidirectional Standard 3.3 V I/O (TC) that doubles as the 1 to 25 MHz crystal oscillator input OSC_IN.
6 PH1-OSC_OUT bidirectional Standard 3.3 V I/O (TC) that doubles as the 1 to 25 MHz crystal oscillator output OSC_OUT.
7 NRST bidirectional Bidirectional reset pin with an embedded weak pull-up resistor.
8 VSSA power_in Analog ground pin for the analog circuitry.
9 VDDA power_in Analog supply pin; the Features list states the 12-bit ADC works down to 1.65 V.
10 PA0 bidirectional I/O with TTa structure as printed in Table 15, with additional functions ADC_IN0, COMP1_INM and RTC_TAMP2/WKUP1 and alternate functions TIM2_CH1, USART2_CTS, TIM2_ETR, USART4_TX and COMP1_OUT.
11 PA1 bidirectional 5 V tolerant I/O (FT) with additional functions ADC_IN1 and COMP1_INP and alternate functions EVENTOUT, TIM2_CH2, USART2_RTS/USART2_DE, TIM21_ETR and USART4_RX.
12 PA2 bidirectional 5 V tolerant I/O (FT) with additional functions ADC_IN2 and COMP2_INM and alternate functions TIM21_CH1, TIM2_CH3, USART2_TX, LPUART1_TX and COMP2_OUT.
13 PA3 bidirectional 5 V tolerant I/O (FT) with additional functions ADC_IN3 and COMP2_INP and alternate functions TIM21_CH2, TIM2_CH4, USART2_RX and LPUART1_RX.
14 PA4 bidirectional Standard 3.3 V I/O (TC) with additional functions ADC_IN4, COMP1_INM and COMP2_INM and alternate functions SPI1_NSS, USART2_CK and TIM22_ETR.
15 PA5 bidirectional Standard 3.3 V I/O (TC) with additional functions ADC_IN5, COMP1_INM and COMP2_INM and alternate functions SPI1_SCK, TIM2_ETR and TIM2_CH1.
16 PA6 bidirectional 5 V tolerant I/O (FT) with additional function ADC_IN6 and alternate functions SPI1_MISO, TIM3_CH1, LPUART1_CTS, TIM22_CH1, EVENTOUT and COMP1_OUT.
17 PA7 bidirectional 5 V tolerant I/O (FT) with additional function ADC_IN7 and alternate functions SPI1_MOSI, TIM3_CH2, TIM22_CH2, EVENTOUT and COMP2_OUT.
18 PB0 bidirectional 5 V tolerant I/O (FT) with additional functions ADC_IN8 and VREF_OUT and alternate functions EVENTOUT and TIM3_CH3.
19 PB1 bidirectional 5 V tolerant I/O (FT) with additional functions ADC_IN9 and VREF_OUT and alternate functions TIM3_CH4 and LPUART1_RTS/LPUART1_DE.
20 PB2 bidirectional 5 V tolerant I/O (FT) with alternate functions LPTIM1_OUT and I2C3_SMBA.
21 PB10 bidirectional 5 V tolerant I/O (FT) with alternate functions TIM2_CH3, LPUART1_TX, SPI2_SCK, I2C2_SCL and LPUART1_RX.
22 PB11 bidirectional 5 V tolerant I/O (FT) with alternate functions EVENTOUT, TIM2_CH4, LPUART1_RX, I2C2_SDA and LPUART1_TX.
23 VSS power_in Ground pin for the digital circuitry.
24 VDD power_in Digital power supply pin; the Features list gives the device power supply as 1.65 V to 3.6 V.
25 PB12 bidirectional 5 V tolerant I/O (FT) with alternate functions SPI2_NSS/I2S2_WS, LPUART1_RTS/LPUART1_DE, I2C2_SMBA and EVENTOUT.
26 PB13 bidirectional 5 V tolerant I/O with FM+ capability (FTf) with alternate functions SPI2_SCK/I2S2_CK, MCO, LPUART1_CTS, I2C2_SCL and TIM21_CH1.
27 PB14 bidirectional 5 V tolerant I/O with FM+ capability (FTf) with alternate functions SPI2_MISO/I2S2_MCK, RTC_OUT, LPUART1_RTS/LPUART1_DE, I2C2_SDA and TIM21_CH2.
28 PB15 bidirectional 5 V tolerant I/O (FT) with alternate functions SPI2_MOSI/I2S2_SD and RTC_REFIN.
29 PA8 bidirectional 5 V tolerant I/O with FM+ capability (FTf) with alternate functions MCO, EVENTOUT, USART1_CK and I2C3_SCL.
30 PA9 bidirectional 5 V tolerant I/O with FM+ capability (FTf) with alternate functions MCO, USART1_TX, I2C1_SCL and I2C3_SMBA.
31 PA10 bidirectional 5 V tolerant I/O with FM+ capability (FTf) with alternate functions USART1_RX and I2C1_SDA.
32 PA11 bidirectional 5 V tolerant I/O (FT) supplied by VDDIO2, with alternate functions SPI1_MISO, EVENTOUT, USART1_CTS and COMP1_OUT.
33 PA12 bidirectional 5 V tolerant I/O (FT) supplied by VDDIO2, with alternate functions SPI1_MOSI, EVENTOUT, USART1_RTS/USART1_DE and COMP2_OUT.
34 PA13 bidirectional 5 V tolerant I/O (FT) with alternate functions SWDIO and LPUART1_RX.
35 VSS power_in Ground pin for the digital circuitry.
36 VDDIO2 power_in Supply pin for the PA11 and PA12 I/Os.
37 PA14 bidirectional 5 V tolerant I/O (FT) with alternate functions SWCLK, USART2_TX and LPUART1_TX.
38 PA15 bidirectional 5 V tolerant I/O (FT) with alternate functions SPI1_NSS, TIM2_ETR, EVENTOUT, USART2_RX, TIM2_CH1 and USART4_RTS/USART4_DE.
39 PB3 bidirectional 5 V tolerant I/O (FT) with additional function COMP2_INM and alternate functions SPI1_SCK, TIM2_CH2, EVENTOUT, USART1_RTS/USART1_DE and USART5_TX.
40 PB4 bidirectional 5 V tolerant I/O with FM+ capability (FTf) with additional function COMP2_INP and alternate functions SPI1_MISO, TIM3_CH1, TIM22_CH1, USART1_CTS, USART5_RX and I2C3_SDA.
41 PB5 bidirectional 5 V tolerant I/O (FT) with additional function COMP2_INP and alternate functions SPI1_MOSI, LPTIM1_IN1, I2C1_SMBA, TIM3_CH2/TIM22_CH2, USART1_CK, USART5_CK and USART5_RTS/USART5_DE.
42 PB6 bidirectional 5 V tolerant I/O with FM+ capability (FTf) with additional function COMP2_INP and alternate functions USART1_TX, I2C1_SCL and LPTIM1_ETR.
43 PB7 bidirectional 5 V tolerant I/O with FM+ capability (FTf) with additional functions COMP2_INP and VREF_PVD_IN and alternate functions USART1_RX, I2C1_SDA, LPTIM1_IN2 and USART4_CTS.
44 BOOT0 input Dedicated BOOT0 boot-mode input pin.
45 PB8 bidirectional 5 V tolerant I/O with FM+ capability (FTf) with alternate function I2C1_SCL.
46 PB9 bidirectional 5 V tolerant I/O with FM+ capability (FTf) with alternate functions EVENTOUT, I2C1_SDA and SPI2_NSS/I2S2_WS.
47 VSS power_in Ground pin for the digital circuitry.
48 VDD power_in Digital power supply pin; the Features list gives the device power supply as 1.65 V to 3.6 V.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package LQFP-48(7x7)
Category Embedded Processors & Controllers
Pins 48

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
External main supply voltage (including VDDA, VDDIO2, VDD) VDD-VSS -0.3 4 V 58
Input voltage on TC pins VIN 4 V 58
Input voltage on any other pin VIN 4 V 58
Variations between different VDDx power pins /ΔVDD/ 50 mV 58
Variations between any VDDx and VDDA power pins /VDDA-VDDx/ 300 mV 58
Variations between all different ground pins including VREF- pin /ΔVSS/ 50 mV 58
Allowed voltage difference for VREF+ > VDDA VREF+ -VDDA 0.4 V 58
Total current into sum of all VDD power lines (source) ΣIVDD 105 mA 59
Total current out of sum of all VSS ground lines (sink) ΣIVSS 105 mA 59
Total current into VDDIO2 power line (source) ΣIVDDIO2 25 mA 59
Maximum current into each VDD power pin (source) IVDD(PIN) 100 mA 59
Maximum current out of each VSS ground pin (sink) IVSS(PIN) 100 mA 59
Output current sunk by any I/O and control pin except FTf pins IIO 16 mA 59
Output current sunk by FTf pins IIO 22 mA 59
Output current sourced by any I/O and control pin IIO -16 mA 59
Total output current sunk by sum of all IOs and control pins except PA11 and PA12 ΣIIO(PIN) 90 mA 59
Total output current sunk by PA11 and PA12 ΣIIO(PIN) 25 mA 59
Total output current sourced by sum of all IOs and control pins ΣIIO(PIN) -90 mA 59
Injected current on FT, FTf, RST and B pins IINJ(PIN) -5 0 mA 59
Injected current on TC pin IINJ(PIN) -5 5 mA 59
Total injected current (sum of all I/O and control pins) ΣIINJ(PIN) -25 25 mA 59
Storage temperature range TSTG -65 150 °C 59
Maximum junction temperature TJ 150 °C 59
Internal AHB clock frequency fHCLK 0 32 MHz 60
Internal APB1 clock frequency fPCLK1 0 32 MHz 60
Internal APB2 clock frequency fPCLK2 0 32 MHz 60
Standard operating voltage VDD 1.65 3.6 V BOR detector disabled 60
Standard operating voltage VDD 1.8 3.6 V BOR detector enabled, at power-on 60
Analog operating voltage (all features) VDDA 1.65 3.6 V Must be the same voltage as VDD(1) 60
Input voltage on FT, FTf and RST pins VIN -0.3 5.5 V 2.0 V ≤ VDD ≤ 3.6 V 60
Input voltage on FT, FTf and RST pins VIN -0.3 5.2 V 1.65 V ≤ VDD ≤ 2.0 V 60
Input voltage on BOOT0 pin VIN 0 5.5 V 60
Input voltage on TC pin VIN -0.3 V 60
Power dissipation, LQFP48 package PD 370 mW Power dissipation at TA = 85 °C (range 6) or TA =105 °C (range 7) 61
Power dissipation, LQFP48 package PD 93 mW Power dissipation at TA = 125 °C (range 3) 61
Temperature range (maximum power dissipation range 6) TA -40 85 °C Maximum power dissipation (range 6) 61
Temperature range (maximum power dissipation range 7) TA -40 105 °C Maximum power dissipation (range 7) 61
Temperature range (maximum power dissipation range 3) TA -40 125 °C Maximum power dissipation (range 3) 61
Junction temperature range (range 6) TJ -40 105 °C -40 °C ≤ TA ≤ 85 °C 61
Junction temperature range (range 7) TJ -40 125 °C -40 °C ≤ TA ≤ 105 °C 61
Junction temperature range (range 3) TJ -40 130 °C -40 °C ≤ TA ≤ 125 °C 61
Power-on/power down reset threshold (falling edge) VPOR/PDR 1 1.5 1.65 V Falling edge 62
Power-on/power down reset threshold (rising edge) VPOR/PDR 1.3 1.5 1.65 V Rising edge 62
Reset temporization TRSTTEMPO 2 3.3 ms VDD rising, BOR enabled 62
Reset temporization TRSTTEMPO 0.4 0.7 1.6 ms VDD rising, BOR disabled 62
Internal reference voltage VREFINT out 1.202 1.224 1.242 V -40 °C < TJ < +125 °C 63
VDDA and VREF+ voltage during VREFINT factory measure VVREF_MEAS 2.99 3 3.01 V 63
Accuracy of factory-measured VREFINT value AVREF_MEAS -5 5 mV Including uncertainties due to ADC and VDDA/VREF+ values 63
Temperature coefficient TCoeff 25 100 ppm/°C -40 °C < TJ < +125 °C 63
Supply current in Standby mode, independent watchdog and LSI OFF IDD (Standby) 2.6 7 µA TA = 125 °C 73
Weak pull-up equivalent resistor RPU 25 45 65 kΩ VIN = VSS 92
Weak pull-down equivalent resistor RPD 25 45 65 kΩ VIN = VDD 92

CAD (KiCad official)

  • Symbol: STM32L071CZT6
  • Footprint: Package_QFP:LQFP-48_7x7mm_P0.5mm
  • 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
  • 3D model files: stm32l071czt6-etched.step / stm32l071czt6-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm32l071czt6.step / stm32l071czt6.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (148 pp, sha256 f413c7ce36b98e6c, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF