component
STM32L071CZT6
Public Made by Adomby adom
STMicroelectronics ST Microelectronics, LQFP-48(7x7). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
STM32L071CZT6
STMicroelectronics · ST Microelectronics · LQFP-48(7x7)
STM32L071CZT6 from STMicroelectronics, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Digital power supply pin; the Features list gives the device power supply as 1.65 V to 3.6 V. |
| 2 | PC13 | bidirectional | 5 V tolerant I/O (FT) with additional function RTC_TAMP1/RTC_TS/RTC_OUT/WKUP2. |
| 3 | PC14-OSC32_IN | bidirectional | 5 V tolerant I/O (FT) that doubles as the 32.768 kHz oscillator input OSC32_IN. |
| 4 | PC15-OSC32_OUT | bidirectional | Standard 3.3 V I/O (TC) that doubles as the 32.768 kHz oscillator output OSC32_OUT. |
| 5 | PH0-OSC_IN | bidirectional | Standard 3.3 V I/O (TC) that doubles as the 1 to 25 MHz crystal oscillator input OSC_IN. |
| 6 | PH1-OSC_OUT | bidirectional | Standard 3.3 V I/O (TC) that doubles as the 1 to 25 MHz crystal oscillator output OSC_OUT. |
| 7 | NRST | bidirectional | Bidirectional reset pin with an embedded weak pull-up resistor. |
| 8 | VSSA | power_in | Analog ground pin for the analog circuitry. |
| 9 | VDDA | power_in | Analog supply pin; the Features list states the 12-bit ADC works down to 1.65 V. |
| 10 | PA0 | bidirectional | I/O with TTa structure as printed in Table 15, with additional functions ADC_IN0, COMP1_INM and RTC_TAMP2/WKUP1 and alternate functions TIM2_CH1, USART2_CTS, TIM2_ETR, USART4_TX and COMP1_OUT. |
| 11 | PA1 | bidirectional | 5 V tolerant I/O (FT) with additional functions ADC_IN1 and COMP1_INP and alternate functions EVENTOUT, TIM2_CH2, USART2_RTS/USART2_DE, TIM21_ETR and USART4_RX. |
| 12 | PA2 | bidirectional | 5 V tolerant I/O (FT) with additional functions ADC_IN2 and COMP2_INM and alternate functions TIM21_CH1, TIM2_CH3, USART2_TX, LPUART1_TX and COMP2_OUT. |
| 13 | PA3 | bidirectional | 5 V tolerant I/O (FT) with additional functions ADC_IN3 and COMP2_INP and alternate functions TIM21_CH2, TIM2_CH4, USART2_RX and LPUART1_RX. |
| 14 | PA4 | bidirectional | Standard 3.3 V I/O (TC) with additional functions ADC_IN4, COMP1_INM and COMP2_INM and alternate functions SPI1_NSS, USART2_CK and TIM22_ETR. |
| 15 | PA5 | bidirectional | Standard 3.3 V I/O (TC) with additional functions ADC_IN5, COMP1_INM and COMP2_INM and alternate functions SPI1_SCK, TIM2_ETR and TIM2_CH1. |
| 16 | PA6 | bidirectional | 5 V tolerant I/O (FT) with additional function ADC_IN6 and alternate functions SPI1_MISO, TIM3_CH1, LPUART1_CTS, TIM22_CH1, EVENTOUT and COMP1_OUT. |
| 17 | PA7 | bidirectional | 5 V tolerant I/O (FT) with additional function ADC_IN7 and alternate functions SPI1_MOSI, TIM3_CH2, TIM22_CH2, EVENTOUT and COMP2_OUT. |
| 18 | PB0 | bidirectional | 5 V tolerant I/O (FT) with additional functions ADC_IN8 and VREF_OUT and alternate functions EVENTOUT and TIM3_CH3. |
| 19 | PB1 | bidirectional | 5 V tolerant I/O (FT) with additional functions ADC_IN9 and VREF_OUT and alternate functions TIM3_CH4 and LPUART1_RTS/LPUART1_DE. |
| 20 | PB2 | bidirectional | 5 V tolerant I/O (FT) with alternate functions LPTIM1_OUT and I2C3_SMBA. |
| 21 | PB10 | bidirectional | 5 V tolerant I/O (FT) with alternate functions TIM2_CH3, LPUART1_TX, SPI2_SCK, I2C2_SCL and LPUART1_RX. |
| 22 | PB11 | bidirectional | 5 V tolerant I/O (FT) with alternate functions EVENTOUT, TIM2_CH4, LPUART1_RX, I2C2_SDA and LPUART1_TX. |
| 23 | VSS | power_in | Ground pin for the digital circuitry. |
| 24 | VDD | power_in | Digital power supply pin; the Features list gives the device power supply as 1.65 V to 3.6 V. |
| 25 | PB12 | bidirectional | 5 V tolerant I/O (FT) with alternate functions SPI2_NSS/I2S2_WS, LPUART1_RTS/LPUART1_DE, I2C2_SMBA and EVENTOUT. |
| 26 | PB13 | bidirectional | 5 V tolerant I/O with FM+ capability (FTf) with alternate functions SPI2_SCK/I2S2_CK, MCO, LPUART1_CTS, I2C2_SCL and TIM21_CH1. |
| 27 | PB14 | bidirectional | 5 V tolerant I/O with FM+ capability (FTf) with alternate functions SPI2_MISO/I2S2_MCK, RTC_OUT, LPUART1_RTS/LPUART1_DE, I2C2_SDA and TIM21_CH2. |
| 28 | PB15 | bidirectional | 5 V tolerant I/O (FT) with alternate functions SPI2_MOSI/I2S2_SD and RTC_REFIN. |
| 29 | PA8 | bidirectional | 5 V tolerant I/O with FM+ capability (FTf) with alternate functions MCO, EVENTOUT, USART1_CK and I2C3_SCL. |
| 30 | PA9 | bidirectional | 5 V tolerant I/O with FM+ capability (FTf) with alternate functions MCO, USART1_TX, I2C1_SCL and I2C3_SMBA. |
| 31 | PA10 | bidirectional | 5 V tolerant I/O with FM+ capability (FTf) with alternate functions USART1_RX and I2C1_SDA. |
| 32 | PA11 | bidirectional | 5 V tolerant I/O (FT) supplied by VDDIO2, with alternate functions SPI1_MISO, EVENTOUT, USART1_CTS and COMP1_OUT. |
| 33 | PA12 | bidirectional | 5 V tolerant I/O (FT) supplied by VDDIO2, with alternate functions SPI1_MOSI, EVENTOUT, USART1_RTS/USART1_DE and COMP2_OUT. |
| 34 | PA13 | bidirectional | 5 V tolerant I/O (FT) with alternate functions SWDIO and LPUART1_RX. |
| 35 | VSS | power_in | Ground pin for the digital circuitry. |
| 36 | VDDIO2 | power_in | Supply pin for the PA11 and PA12 I/Os. |
| 37 | PA14 | bidirectional | 5 V tolerant I/O (FT) with alternate functions SWCLK, USART2_TX and LPUART1_TX. |
| 38 | PA15 | bidirectional | 5 V tolerant I/O (FT) with alternate functions SPI1_NSS, TIM2_ETR, EVENTOUT, USART2_RX, TIM2_CH1 and USART4_RTS/USART4_DE. |
| 39 | PB3 | bidirectional | 5 V tolerant I/O (FT) with additional function COMP2_INM and alternate functions SPI1_SCK, TIM2_CH2, EVENTOUT, USART1_RTS/USART1_DE and USART5_TX. |
| 40 | PB4 | bidirectional | 5 V tolerant I/O with FM+ capability (FTf) with additional function COMP2_INP and alternate functions SPI1_MISO, TIM3_CH1, TIM22_CH1, USART1_CTS, USART5_RX and I2C3_SDA. |
| 41 | PB5 | bidirectional | 5 V tolerant I/O (FT) with additional function COMP2_INP and alternate functions SPI1_MOSI, LPTIM1_IN1, I2C1_SMBA, TIM3_CH2/TIM22_CH2, USART1_CK, USART5_CK and USART5_RTS/USART5_DE. |
| 42 | PB6 | bidirectional | 5 V tolerant I/O with FM+ capability (FTf) with additional function COMP2_INP and alternate functions USART1_TX, I2C1_SCL and LPTIM1_ETR. |
| 43 | PB7 | bidirectional | 5 V tolerant I/O with FM+ capability (FTf) with additional functions COMP2_INP and VREF_PVD_IN and alternate functions USART1_RX, I2C1_SDA, LPTIM1_IN2 and USART4_CTS. |
| 44 | BOOT0 | input | Dedicated BOOT0 boot-mode input pin. |
| 45 | PB8 | bidirectional | 5 V tolerant I/O with FM+ capability (FTf) with alternate function I2C1_SCL. |
| 46 | PB9 | bidirectional | 5 V tolerant I/O with FM+ capability (FTf) with alternate functions EVENTOUT, I2C1_SDA and SPI2_NSS/I2S2_WS. |
| 47 | VSS | power_in | Ground pin for the digital circuitry. |
| 48 | VDD | power_in | Digital power supply pin; the Features list gives the device power supply as 1.65 V to 3.6 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LQFP-48(7x7) |
| Category | Embedded Processors & Controllers |
| Pins | 48 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| External main supply voltage (including VDDA, VDDIO2, VDD) | VDD-VSS | -0.3 | 4 | V | 58 | ||
| Input voltage on TC pins | VIN | 4 | V | 58 | |||
| Input voltage on any other pin | VIN | 4 | V | 58 | |||
| Variations between different VDDx power pins | /ΔVDD/ | 50 | mV | 58 | |||
| Variations between any VDDx and VDDA power pins | /VDDA-VDDx/ | 300 | mV | 58 | |||
| Variations between all different ground pins including VREF- pin | /ΔVSS/ | 50 | mV | 58 | |||
| Allowed voltage difference for VREF+ > VDDA | VREF+ -VDDA | 0.4 | V | 58 | |||
| Total current into sum of all VDD power lines (source) | ΣIVDD | 105 | mA | 59 | |||
| Total current out of sum of all VSS ground lines (sink) | ΣIVSS | 105 | mA | 59 | |||
| Total current into VDDIO2 power line (source) | ΣIVDDIO2 | 25 | mA | 59 | |||
| Maximum current into each VDD power pin (source) | IVDD(PIN) | 100 | mA | 59 | |||
| Maximum current out of each VSS ground pin (sink) | IVSS(PIN) | 100 | mA | 59 | |||
| Output current sunk by any I/O and control pin except FTf pins | IIO | 16 | mA | 59 | |||
| Output current sunk by FTf pins | IIO | 22 | mA | 59 | |||
| Output current sourced by any I/O and control pin | IIO | -16 | mA | 59 | |||
| Total output current sunk by sum of all IOs and control pins except PA11 and PA12 | ΣIIO(PIN) | 90 | mA | 59 | |||
| Total output current sunk by PA11 and PA12 | ΣIIO(PIN) | 25 | mA | 59 | |||
| Total output current sourced by sum of all IOs and control pins | ΣIIO(PIN) | -90 | mA | 59 | |||
| Injected current on FT, FTf, RST and B pins | IINJ(PIN) | -5 | 0 | mA | 59 | ||
| Injected current on TC pin | IINJ(PIN) | -5 | 5 | mA | 59 | ||
| Total injected current (sum of all I/O and control pins) | ΣIINJ(PIN) | -25 | 25 | mA | 59 | ||
| Storage temperature range | TSTG | -65 | 150 | °C | 59 | ||
| Maximum junction temperature | TJ | 150 | °C | 59 | |||
| Internal AHB clock frequency | fHCLK | 0 | 32 | MHz | 60 | ||
| Internal APB1 clock frequency | fPCLK1 | 0 | 32 | MHz | 60 | ||
| Internal APB2 clock frequency | fPCLK2 | 0 | 32 | MHz | 60 | ||
| Standard operating voltage | VDD | 1.65 | 3.6 | V | BOR detector disabled | 60 | |
| Standard operating voltage | VDD | 1.8 | 3.6 | V | BOR detector enabled, at power-on | 60 | |
| Analog operating voltage (all features) | VDDA | 1.65 | 3.6 | V | Must be the same voltage as VDD(1) | 60 | |
| Input voltage on FT, FTf and RST pins | VIN | -0.3 | 5.5 | V | 2.0 V ≤ VDD ≤ 3.6 V | 60 | |
| Input voltage on FT, FTf and RST pins | VIN | -0.3 | 5.2 | V | 1.65 V ≤ VDD ≤ 2.0 V | 60 | |
| Input voltage on BOOT0 pin | VIN | 0 | 5.5 | V | 60 | ||
| Input voltage on TC pin | VIN | -0.3 | V | 60 | |||
| Power dissipation, LQFP48 package | PD | 370 | mW | Power dissipation at TA = 85 °C (range 6) or TA =105 °C (range 7) | 61 | ||
| Power dissipation, LQFP48 package | PD | 93 | mW | Power dissipation at TA = 125 °C (range 3) | 61 | ||
| Temperature range (maximum power dissipation range 6) | TA | -40 | 85 | °C | Maximum power dissipation (range 6) | 61 | |
| Temperature range (maximum power dissipation range 7) | TA | -40 | 105 | °C | Maximum power dissipation (range 7) | 61 | |
| Temperature range (maximum power dissipation range 3) | TA | -40 | 125 | °C | Maximum power dissipation (range 3) | 61 | |
| Junction temperature range (range 6) | TJ | -40 | 105 | °C | -40 °C ≤ TA ≤ 85 °C | 61 | |
| Junction temperature range (range 7) | TJ | -40 | 125 | °C | -40 °C ≤ TA ≤ 105 °C | 61 | |
| Junction temperature range (range 3) | TJ | -40 | 130 | °C | -40 °C ≤ TA ≤ 125 °C | 61 | |
| Power-on/power down reset threshold (falling edge) | VPOR/PDR | 1 | 1.5 | 1.65 | V | Falling edge | 62 |
| Power-on/power down reset threshold (rising edge) | VPOR/PDR | 1.3 | 1.5 | 1.65 | V | Rising edge | 62 |
| Reset temporization | TRSTTEMPO | 2 | 3.3 | ms | VDD rising, BOR enabled | 62 | |
| Reset temporization | TRSTTEMPO | 0.4 | 0.7 | 1.6 | ms | VDD rising, BOR disabled | 62 |
| Internal reference voltage | VREFINT out | 1.202 | 1.224 | 1.242 | V | -40 °C < TJ < +125 °C | 63 |
| VDDA and VREF+ voltage during VREFINT factory measure | VVREF_MEAS | 2.99 | 3 | 3.01 | V | 63 | |
| Accuracy of factory-measured VREFINT value | AVREF_MEAS | -5 | 5 | mV | Including uncertainties due to ADC and VDDA/VREF+ values | 63 | |
| Temperature coefficient | TCoeff | 25 | 100 | ppm/°C | -40 °C < TJ < +125 °C | 63 | |
| Supply current in Standby mode, independent watchdog and LSI OFF | IDD (Standby) | 2.6 | 7 | µA | TA = 125 °C | 73 | |
| Weak pull-up equivalent resistor | RPU | 25 | 45 | 65 | kΩ | VIN = VSS | 92 |
| Weak pull-down equivalent resistor | RPD | 25 | 45 | 65 | kΩ | VIN = VDD | 92 |
CAD (KiCad official)
- Symbol:
STM32L071CZT6 - Footprint:
Package_QFP:LQFP-48_7x7mm_P0.5mm - 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
- 3D model files:
stm32l071czt6-etched.step/stm32l071czt6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32l071czt6.step/stm32l071czt6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (148 pp, sha256
f413c7ce36b98e6c, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).