Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

STM32L051K6U6

STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · UFQFPN-32(5x5)

STM32L051K6U6 from STMicroelectronics, in a UFQFPN-32(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Digital power supply pin of the device, supplied within the 1.65 V to 3.6 V range stated in the datasheet features.
2 PC14-OSC32_IN (PC14) bidirectional 5 V tolerant (FT) GPIO PC14 that also serves as the OSC32_IN input of the 32 kHz oscillator used for the RTC.
3 PC15-OSC32_OUT (PC15) bidirectional Standard 3.3 V I/O (TC) PC15 that also serves as the OSC32_OUT output of the 32 kHz oscillator.
4 NRST bidirectional Bidirectional reset pin with an embedded weak pull-up resistor.
5 VDDA power_in Analog power supply pin for the analog blocks of the device.
6 PA0 bidirectional Standard 3.3 V I/O (TC) with alternate functions including TIM2_CH1, USART2_CTS and COMP1_OUT, and additional inputs ADC_IN0, COMP1_INM6 and RTC_TAMP2/WKUP1.
7 PA1 bidirectional 5 V tolerant I/O (FT) with alternate functions including USART2_RTS_DE, TIM2_CH2 and TIM21_ETR, and additional inputs ADC_IN1 and COMP1_INP.
8 PA2 bidirectional 5 V tolerant I/O (FT) with alternate functions including USART2_TX, TIM21_CH1 and COMP2_OUT, and additional inputs ADC_IN2 and COMP2_INM6.
9 PA3 bidirectional 5 V tolerant I/O (FT) with alternate functions including USART2_RX, TIM21_CH2 and TIM2_CH4, and additional inputs ADC_IN3 and COMP2_INP.
10 PA4 bidirectional Standard 3.3 V I/O (TC) with alternate functions including SPI1_NSS, USART2_CK and TIM22_ETR, and additional inputs ADC_IN4, COMP1_INM4 and COMP2_INM4.
11 PA5 bidirectional Standard 3.3 V I/O (TC) with alternate functions including SPI1_SCK, TIM2_ETR and TIM2_CH1, and additional inputs ADC_IN5, COMP1_INM5 and COMP2_INM5.
12 PA6 bidirectional 5 V tolerant I/O (FT) with alternate functions including SPI1_MISO, LPUART1_CTS, TIM22_CH1 and COMP1_OUT, and additional input ADC_IN6.
13 PA7 bidirectional 5 V tolerant I/O (FT) with alternate functions including SPI1_MOSI, TIM22_CH2 and COMP2_OUT, and additional input ADC_IN7.
14 PB0 bidirectional 5 V tolerant I/O (FT) with EVENTOUT alternate function, and additional functions ADC_IN8 and VREF_OUT.
15 PB1 bidirectional 5 V tolerant I/O (FT) with LPUART1_RTS_DE alternate function, and additional functions ADC_IN9 and VREF_OUT.
16 PB2 bidirectional 5 V tolerant I/O (FT) with LPTIM1_OUT alternate function.
17 VDD power_in Digital power supply pin of the device, supplied within the 1.65 V to 3.6 V range stated in the datasheet features.
18 PA8 bidirectional 5 V tolerant I/O (FT) with MCO, EVENTOUT and USART1_CK alternate functions.
19 PA9 bidirectional 5 V tolerant I/O (FT) with MCO and USART1_TX alternate functions.
20 PA10 bidirectional 5 V tolerant I/O (FT) with USART1_RX alternate function.
21 PA11 bidirectional 5 V tolerant I/O (FT) with SPI1_MISO, EVENTOUT, USART1_CTS and COMP1_OUT alternate functions.
22 PA12 bidirectional 5 V tolerant I/O (FT) with SPI1_MOSI, EVENTOUT, USART1_RTS_DE and COMP2_OUT alternate functions.
23 PA13 bidirectional 5 V tolerant I/O (FT) with SWDIO serial wire debug alternate function.
24 PA14 bidirectional 5 V tolerant I/O (FT) with SWCLK and USART2_TX alternate functions.
25 PA15 bidirectional 5 V tolerant I/O (FT) with SPI1_NSS, TIM2_ETR, EVENTOUT, USART2_RX and TIM2_CH1 alternate functions.
26 PB3 bidirectional 5 V tolerant I/O (FT) with SPI1_SCK, TIM2_CH2 and EVENTOUT alternate functions, and additional input COMP2_INN.
27 PB4 bidirectional 5 V tolerant I/O (FT) with SPI1_MISO, EVENTOUT and TIM22_CH1 alternate functions, and additional input COMP2_INP.
28 PB5 bidirectional 5 V tolerant I/O (FT) with SPI1_MOSI, LPTIM1_IN1, I2C1_SMBA and TIM22_CH2 alternate functions, and additional input COMP2_INP.
29 PB6 bidirectional 5 V tolerant, FM+ capable I/O (FTf) with USART1_TX, I2C1_SCL and LPTIM1_ETR alternate functions, and additional input COMP2_INP.
30 PB7 bidirectional 5 V tolerant, FM+ capable I/O (FTf) with USART1_RX, I2C1_SDA and LPTIM1_IN2 alternate functions, and additional inputs COMP2_INP and PVD_IN.
31 BOOT0 input Dedicated BOOT0 pin used for boot mode selection.
32 PB8 bidirectional 5 V tolerant, FM+ capable I/O (FTf) with I2C1_SCL alternate function.
33 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package UFQFPN-32(5x5)
Category Embedded Processors & Controllers
Pins 33

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Internal AHB clock frequency fHCLK 0 32 MHz - 51
Standard operating voltage VDD 1.65 3.6 V BOR detector disabled 51
Standard operating voltage VDD 1.8 3.6 V BOR detector enabled, at power-on 51
Analog operating voltage (all features) VDDA 1.65 3.6 V Must be the same voltage as VDD 51
Input voltage on FT, FTf and RST pins VIN -0.3 5.5 V 2.0 V ≤ VDD ≤ 3.6 V 51
Input voltage on FT, FTf and RST pins VIN -0.3 5.2 V 1.65 V ≤ VDD ≤ 2.0 V 51
Input voltage on BOOT0 pin VIN 0 5.5 V - 51
Power dissipation, UFQFPN32 PD 526 mW TA = 85 °C (range 6) or TA = 105 °C (range 7) 51
Ambient temperature range 6 TA -40 85 °C Maximum power dissipation (range 6) 52
Ambient temperature range 7 TA -40 105 °C Maximum power dissipation (range 7) 52
Ambient temperature range 3 TA -40 125 °C Maximum power dissipation (range 3) 52
Junction temperature range 6 TJ -40 105 °C -40 °C ≤ TA ≤ 85 °C 52
Junction temperature range 7 TJ -40 125 °C -40 °C ≤ TA ≤ 105 °C 52
Junction temperature range 3 TJ -40 130 °C -40 °C ≤ TA ≤ 125 °C 52
External main supply voltage (including VDDA, VDDIO2, VDD) VDD-VSS -0.3 4 V - 49
Input voltage on any other pin (min VSS − 0.3 V) VIN 4 V - 49
Input voltage on TC pins (min VSS − 0.3 V) VIN 4 V - 49
Variations between different VDDx power pins /ΔVDD/ 50 mV - 49
Variations between any VDDx and VDDA power pins /VDDA-VDDx/ 300 mV - 49
Variations between all different ground pins /ΔVSS/ 50 mV - 49
Allowed voltage difference for VREF+ > VDDA VREF+ -VDDA 0.4 V VREF+ > VDDA 49
Storage temperature range TSTG -65 150 °C - 50
Maximum junction temperature TJ 150 °C - 50
Total current into sum of all VDD power lines (source) ΣIVDD 105 mA - 50
Total current out of sum of all VSS ground lines (sink) ΣIVSS 105 mA - 50
Maximum current into each VDD power pin (source) IVDD(PIN) 100 mA - 50
Maximum current out of each VSS ground pin (sink) IVSS(PIN) 100 mA - 50
Output current sunk by any I/O and control pin except FTf pins IIO 16 mA - 50
Output current sunk by FTf pins IIO 22 mA - 50
Output current sourced by any I/O and control pin IIO -16 mA - 50
Total output current sunk by sum of all IOs and control pins except PA11 and PA12 ΣIIO(PIN) 90 mA - 50
Total output current sunk by PA11 and PA12 ΣIIO(PIN) 25 mA - 50
Total output current sourced by sum of all IOs and control pins ΣIIO(PIN) -90 mA - 50
Injected current on FT, FTf, RST and B pins IINJ(PIN) -5 0 mA - 50
Injected current on TC pin IINJ(PIN) -5 5 mA - 50
Total injected current (sum of all I/O and control pins) ΣIINJ(PIN) -25 25 mA - 50
Power-on/power down reset threshold VPOR/PDR 1 1.5 1.65 V Falling edge 53
Power-on/power down reset threshold VPOR/PDR 1.3 1.5 1.65 V Rising edge 53
Brown-out reset threshold 0 VBOR0 1.67 1.7 1.74 V Falling edge 53
Brown-out reset threshold 0 VBOR0 1.69 1.76 1.8 V Rising edge 53
Internal reference voltage VREFINT out 1.202 1.224 1.242 V -40 °C < TJ < +125 °C 54
VDDA and VREF+ voltage during VREFINT factory measure VVREF_MEAS 2.99 3 3.01 V - 54
Temperature coefficient TCoeff 25 100 ppm/°C -40 °C < TJ < +125 °C 54
Voltage coefficient VDDCoeff 2000 ppm/V 3.0 V < VDDA < 3.6 V 54
Data retention mode (minimum supply voltage without losing RAM data) VRM 1.65 V STOP mode (or RESET) 74
Supply current in Stop mode IDD (Stop) 0.41 1 µA TA = −40 to 25°C 62
Supply current in Stop mode IDD (Stop) 11 24 µA TA = 125°C 62
Supply current in Standby mode, independent watchdog and LSI OFF IDD (Standby) 0.29 0.6 µA TA = −40 to 25°C 63
Supply current in Standby mode, independent watchdog and LSI OFF IDD (Standby) 7 µA TA = 125 °C 63
Supply current in Run mode, code executed from Flash, HSI clock IDD (Run from Flash) 6.25 7 mA Range 1, VCORE=1.8 V, VOS[1:0]=01, 32 MHz 56
Supply current in Run mode, code executed from Flash, MSI clock IDD (Run from Flash) 165 230 µA Range 3, VCORE=1.2 V, VOS[1:0]=11, 1 MHz 56
Supply current in Sleep mode, Flash OFF, HSI16 clock IDD (Sleep) 1750 2100 µA Range 1, VCORE=1.8 V, VOS[1:0]=01, 32 MHz 59
Wakeup from Stop mode, regulator in Run mode tWUSTOP 4.9 7 µs fHCLK = fHSI = 16 MHz 66
Wakeup from Standby mode, FWU bit = 1 tWUSTDBY 65 130 µs fHCLK = MSI = 2.1 MHz 66
Accuracy of the factory-calibrated HSI16 oscillator ACCHSI16 -5.45 3.25 % VDDA = 1.65 V to 3.6 V, TA = −40 to 125 °C 71
Accuracy of the factory-calibrated HSI16 oscillator ACCHSI16 -1.5 1.5 % VDDA = 3.0 V, TA = 0 to 55 °C 71
LSI frequency fLSI 26 38 56 kHz - 72
Variations of VDDA measurement accuracy of VREFINT factory-measured value AVREF_MEAS -5 5 mV Including uncertainties due to ADC and VDDA/VREF+ values 54

CAD (KiCad official)

  • Symbol: STM32L051K6U6
  • Footprint: Package_DFN_QFN:UFQFPN-32-1EP_5x5mm_P0.5mm_EP3.5x3.5mm
  • 3D model: UFQFPN-32(5x5) (KiCad packages3D, STEP)
  • 3D model files: stm32l051k6u6-etched.step / stm32l051k6u6-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm32l051k6u6.step / stm32l051k6u6.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (131 pp, sha256 df2ac5c4dfa917ae, retrieved 2026-10-18, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF