main
Ray Publish 0.1.0 68c270d

STM32L011F3U3TR

STMicroelectronics · ST Microelectronics · UFQFPN-20(3x3)

STM32L011F3U3TR from STMicroelectronics, in a UFQFPN-20(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PC14-OSC32_IN bidirectional 5 V tolerant I/O (FT) that also serves as the OSC32_IN 32 kHz oscillator input.
2 PC15-OSC32_OUT bidirectional Standard 3.3 V I/O (TC) that also serves as the OSC32_OUT 32 kHz oscillator output.
3 NRST bidirectional Active-low bidirectional reset pin with an embedded weak pull-up, acting as device reset input and internal reset output.
4 VDDA power_in Analog power supply pin; the device supply range is 1.65 V to 3.6 V as stated on the cover page.
5 PA0-CK_IN bidirectional 3.3 V tolerant I/O directly connected to the ADC, with alternate functions including USART2_RX, TIM2_CH1 and LPUART1_RX and additional functions ADC_IN0 and COMP1_INM.
6 PA1 bidirectional 5 V tolerant I/O with alternate functions including USART2_RTS_DE, TIM21_ETR and LPUART1_TX and additional functions ADC_IN1 and COMP1_INP.
7 PA4 bidirectional 3.3 V tolerant I/O directly connected to the ADC, with alternate functions including SPI1_NSS, I2C1_SCL, USART2_CK and LPTIM1_ETR and additional functions ADC_IN4, COMP1_INM and COMP2_INM.
8 PA5 bidirectional 3.3 V tolerant I/O directly connected to the ADC, with alternate functions including SPI1_SCK, LPTIM1_IN2 and TIM2_CH1 and additional functions ADC_IN5, COMP1_INM and COMP2_INM.
9 PA6 bidirectional 5 V tolerant I/O with alternate functions including SPI1_MISO, LPTIM1_ETR, LPUART1_CTS and COMP1_OUT and additional function ADC_IN6.
10 PA7 bidirectional 5 V tolerant I/O with alternate functions including SPI1_MOSI, LPTIM1_OUT, USART2_CTS, TIM21_ETR and COMP2_OUT and additional functions COMP2_INP and ADC_IN7.
11 PB1 bidirectional 5 V tolerant I/O with alternate functions including USART2_CK, SPI1_MOSI, LPTIM1_IN1, LPUART1_RTS_DE and TIM2_CH4 and additional functions ADC_IN9 and VREF_OUT.
12 VSS power_in Digital and analog ground pin.
13 VDD power_in Digital power supply pin.
14 PA9 bidirectional 5 V tolerant, Fast Mode Plus capable I/O with alternate functions including MCO, I2C1_SCL, LPTIM1_OUT, USART2_TX, TIM21_CH2 and COMP1_OUT.
15 PA10 bidirectional 5 V tolerant, Fast Mode Plus capable I/O with alternate functions including TIM21_CH1, I2C1_SDA, RTC_REFIN, USART2_RX, TIM2_CH3 and COMP1_OUT.
16 PA13 bidirectional 5 V tolerant, Fast Mode Plus capable I/O with alternate functions including SWDIO, LPTIM1_ETR, I2C1_SDA, SPI1_SCK, LPUART1_RX and COMP1_OUT.
17 PA14 bidirectional 5 V tolerant I/O whose alternate functions include SWCLK, LPTIM1_OUT, I2C1_SMBA, USART2_TX, SPI1_MISO, LPUART1_TX and COMP2_OUT.
18 PB6 bidirectional 5 V tolerant, Fast Mode Plus capable I/O with alternate functions including USART2_TX, I2C1_SCL, LPTIM1_ETR, TIM2_CH3 and LPUART1_TX and additional function COMP2_INP.
19 PB7 bidirectional 5 V tolerant, Fast Mode Plus capable I/O with alternate functions including USART2_RX, I2C1_SDA, LPTIM1_IN2, TIM2_CH4 and LPUART1_RX and additional functions COMP2_INP and VREF_PVD_IN.
20 PB9-BOOT0 input Dedicated BOOT0 pin used for boot memory selection; it is an input-only pin.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package UFQFPN-20(3x3)
Category Embedded Processors & Controllers
Pins 20

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
External main supply voltage (including VDDA, VDD) VDD-VSS -0.3 4 V 46
Input voltage on TC pins VIN 4 V 46
Input voltage on any other pin VIN 4 V 46
Variations between different VDDx power pins /ΔVDD/ 50 mV 46
Variations between any VDDx and VDDA power pins /VDDA-VDDx/ 300 mV 46
Variations between all different ground pins /ΔVSS/ 50 mV 46
Total current into sum of all VDD power lines (source) ΣIVDD 105 mA 47
Total current out of sum of all VSS ground lines (sink) ΣIVSS 105 mA 47
Maximum current into each VDD power pin (source) IVDD(PIN) 100 mA 47
Maximum current out of each VSS ground pin (sink) IVSS(PIN) 100 mA 47
Output current sunk by any I/O and control pin IIO 16 mA Except FTf pins 47
Output current sunk by FTf pins IIO 22 mA FTf pins 47
Output current sourced by any I/O and control pin IIO -16 mA 47
Total output current sunk by sum of all IOs and control pins ΣIIO(PIN) 90 mA 47
Total output current sourced by sum of all IOs and control pins ΣIIO(PIN) -90 mA 47
Injected current on FT, FTf, RST and B pins IINJ(PIN) -5 0 mA Injected current on FT, FTf, RST and B pins 47
Injected current on TC pin IINJ(PIN) -5 5 mA Injected current on TC pin 47
Total injected current (sum of all I/O and control pins) ΣIINJ(PIN) -25 25 mA Total injected current (sum of all I/O and control pins) 47
Storage temperature range TSTG -65 150 °C 47
Maximum junction temperature TJ 150 °C 47
Internal AHB clock frequency fHCLK 0 32 MHz 48
Internal APB1 clock frequency fPCLK1 0 32 MHz 48
Internal APB2 clock frequency fPCLK2 0 32 MHz 48
Standard operating voltage VDD 1.65 3.6 V BOR detector disabled 48
Standard operating voltage VDD 1.8 3.6 V BOR detector enabled, at power on 48
Analog operating voltage (all features) VDDA 1.65 3.6 V Must be the same voltage as VDD 48
Input voltage on FT, FTf and RST pins VIN -0.3 5.5 V 2.0 V ≤ VDD ≤ 3.6 V 48
Input voltage on FT, FTf and RST pins VIN -0.3 5.2 V 1.65 V ≤ VDD ≤ 2.0 V 48
Input voltage on BOOT0 pin VIN 0 5.5 V 48
Input voltage on TC pin VIN -0.3 V 48
Power dissipation at TA = 85 °C (range 6) or TA = 105 °C (range 7), UFQFPN20 package PD 196 mW Power dissipation at TA = 85 °C (range 6) or TA = 105 °C (range 7) 48
Maximum power dissipation temperature range (range 6) TA -40 85 °C Maximum power dissipation (range 6) 49
Maximum power dissipation temperature range (range 7) TA -40 105 °C Maximum power dissipation (range 7) 49
Maximum power dissipation temperature range (range 3) TA -40 125 °C Maximum power dissipation (range 3) 49
Junction temperature range (range 6) TJ -40 105 °C -40 °C ≤ TA ≤ 85 °C 49
Junction temperature range (range 7) TJ -40 125 °C -40 °C ≤ TA ≤ 105 °C 49
Junction temperature range (range 3) TJ -40 130 °C -40 °C ≤ TA ≤ 125 °C 49
Power on/power down reset threshold VPOR/PDR 1 1.5 1.65 V Falling edge 49
Internal reference voltage VREFINT out 1.202 1.224 1.242 V -40 °C < TJ < +125 °C 51
Temperature coefficient TCoeff 25 100 ppm/°C -40 °C < TJ < +125 °C 51
Supply current in Stop mode IDD (Stop) 0.34 0.99 µA TA = -40°C to 25°C 59
Supply current in Stop mode IDD (Stop) 4.9 19 µA TA = 125°C 59
Supply current in Standby mode IDD (Standby) 0.23 0.6 µA Independent watchdog and LSI OFF, TA = -40 °C to 25 °C 60
Supply current in Standby mode IDD (Standby) 1.35 5 µA Independent watchdog and LSI OFF, TA = 125 °C 60
Supply current in Run mode, code executed from Flash IDD (Run from Flash) 5.3 6.5 mA fHSE = fHCLK 32 MHz, Range 1, VCORE=1.8 V, VOS[1:0]=01 53
Supply current in Run mode, code executed from Flash IDD (Run from Flash) 2.1 2.4 mA 16 MHz, Range 2, VCORE=1.5 V, VOS[1:0]=10 53
Weak pull-up equivalent resistor (I/O) RPU 25 45 65 kΩ VIN = VSS 75
Weak pull-down equivalent resistor (I/O) RPD 25 45 65 kΩ VIN = VDD 75
Input leakage current (all I/Os except BOOT0 and FTf) Ilkg -50 50 nA VSS ≤ VIN ≤ VDD 75
Weak pull-up equivalent resistor (NRST) RPU 25 45 65 kΩ VIN = VSS 79
NRST output low level voltage VOL(NRST) 0.4 V IOL = 2 mA, 2.7 V < VDD < 3.6 V 79
Accuracy of the factory-calibrated HSI16 oscillator ACCHSI16 -5.45 3.25 % VDDA = 1.65 V to 3.6 V, TA = -40 to 125 °C 67
User external clock source frequency fHSE_ext 1 8 32 MHz CSS is ON or PLL is used 64
PLL input clock fPLL_IN 2 24 MHz 69
Analog supply voltage for ADC ON (standard channels) VDDA 1.75 3.6 V Standard channels 80
ADC clock frequency (voltage scaling Range 1) fADC 0.14 16 MHz Voltage scaling Range 1 80
Data retention mode (STOP mode or RESET) VRM 1.65 V STOP mode (or RESET) 70
Operating voltage (read / write / erase) VDD 1.65 3.6 V Read / Write / Erase 71
Programming time for word or half-page (erasing) tprog 3.28 3.94 ms Erasing 71

CAD (KiCad official)

  • Symbol: STM32L011F3U3TR
  • Footprint: Package_DFN_QFN:ST_UFQFPN-20_3x3mm_P0.5mm
  • 3D model: UFQFPN-20(3x3) (KiCad packages3D, STEP)
  • 3D model files: stm32l011f3u3tr-etched.step / stm32l011f3u3tr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm32l011f3u3tr.step / stm32l011f3u3tr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (119 pp, sha256 1271aa38a181c7a2, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF