Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
STM32L011F3U3TR
STMicroelectronics · ST Microelectronics · UFQFPN-20(3x3)
STM32L011F3U3TR from STMicroelectronics, in a UFQFPN-20(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PC14-OSC32_IN | bidirectional | 5 V tolerant I/O (FT) that also serves as the OSC32_IN 32 kHz oscillator input. |
| 2 | PC15-OSC32_OUT | bidirectional | Standard 3.3 V I/O (TC) that also serves as the OSC32_OUT 32 kHz oscillator output. |
| 3 | NRST | bidirectional | Active-low bidirectional reset pin with an embedded weak pull-up, acting as device reset input and internal reset output. |
| 4 | VDDA | power_in | Analog power supply pin; the device supply range is 1.65 V to 3.6 V as stated on the cover page. |
| 5 | PA0-CK_IN | bidirectional | 3.3 V tolerant I/O directly connected to the ADC, with alternate functions including USART2_RX, TIM2_CH1 and LPUART1_RX and additional functions ADC_IN0 and COMP1_INM. |
| 6 | PA1 | bidirectional | 5 V tolerant I/O with alternate functions including USART2_RTS_DE, TIM21_ETR and LPUART1_TX and additional functions ADC_IN1 and COMP1_INP. |
| 7 | PA4 | bidirectional | 3.3 V tolerant I/O directly connected to the ADC, with alternate functions including SPI1_NSS, I2C1_SCL, USART2_CK and LPTIM1_ETR and additional functions ADC_IN4, COMP1_INM and COMP2_INM. |
| 8 | PA5 | bidirectional | 3.3 V tolerant I/O directly connected to the ADC, with alternate functions including SPI1_SCK, LPTIM1_IN2 and TIM2_CH1 and additional functions ADC_IN5, COMP1_INM and COMP2_INM. |
| 9 | PA6 | bidirectional | 5 V tolerant I/O with alternate functions including SPI1_MISO, LPTIM1_ETR, LPUART1_CTS and COMP1_OUT and additional function ADC_IN6. |
| 10 | PA7 | bidirectional | 5 V tolerant I/O with alternate functions including SPI1_MOSI, LPTIM1_OUT, USART2_CTS, TIM21_ETR and COMP2_OUT and additional functions COMP2_INP and ADC_IN7. |
| 11 | PB1 | bidirectional | 5 V tolerant I/O with alternate functions including USART2_CK, SPI1_MOSI, LPTIM1_IN1, LPUART1_RTS_DE and TIM2_CH4 and additional functions ADC_IN9 and VREF_OUT. |
| 12 | VSS | power_in | Digital and analog ground pin. |
| 13 | VDD | power_in | Digital power supply pin. |
| 14 | PA9 | bidirectional | 5 V tolerant, Fast Mode Plus capable I/O with alternate functions including MCO, I2C1_SCL, LPTIM1_OUT, USART2_TX, TIM21_CH2 and COMP1_OUT. |
| 15 | PA10 | bidirectional | 5 V tolerant, Fast Mode Plus capable I/O with alternate functions including TIM21_CH1, I2C1_SDA, RTC_REFIN, USART2_RX, TIM2_CH3 and COMP1_OUT. |
| 16 | PA13 | bidirectional | 5 V tolerant, Fast Mode Plus capable I/O with alternate functions including SWDIO, LPTIM1_ETR, I2C1_SDA, SPI1_SCK, LPUART1_RX and COMP1_OUT. |
| 17 | PA14 | bidirectional | 5 V tolerant I/O whose alternate functions include SWCLK, LPTIM1_OUT, I2C1_SMBA, USART2_TX, SPI1_MISO, LPUART1_TX and COMP2_OUT. |
| 18 | PB6 | bidirectional | 5 V tolerant, Fast Mode Plus capable I/O with alternate functions including USART2_TX, I2C1_SCL, LPTIM1_ETR, TIM2_CH3 and LPUART1_TX and additional function COMP2_INP. |
| 19 | PB7 | bidirectional | 5 V tolerant, Fast Mode Plus capable I/O with alternate functions including USART2_RX, I2C1_SDA, LPTIM1_IN2, TIM2_CH4 and LPUART1_RX and additional functions COMP2_INP and VREF_PVD_IN. |
| 20 | PB9-BOOT0 | input | Dedicated BOOT0 pin used for boot memory selection; it is an input-only pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | UFQFPN-20(3x3) |
| Category | Embedded Processors & Controllers |
| Pins | 20 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| External main supply voltage (including VDDA, VDD) | VDD-VSS | -0.3 | 4 | V | 46 | ||
| Input voltage on TC pins | VIN | 4 | V | 46 | |||
| Input voltage on any other pin | VIN | 4 | V | 46 | |||
| Variations between different VDDx power pins | /ΔVDD/ | 50 | mV | 46 | |||
| Variations between any VDDx and VDDA power pins | /VDDA-VDDx/ | 300 | mV | 46 | |||
| Variations between all different ground pins | /ΔVSS/ | 50 | mV | 46 | |||
| Total current into sum of all VDD power lines (source) | ΣIVDD | 105 | mA | 47 | |||
| Total current out of sum of all VSS ground lines (sink) | ΣIVSS | 105 | mA | 47 | |||
| Maximum current into each VDD power pin (source) | IVDD(PIN) | 100 | mA | 47 | |||
| Maximum current out of each VSS ground pin (sink) | IVSS(PIN) | 100 | mA | 47 | |||
| Output current sunk by any I/O and control pin | IIO | 16 | mA | Except FTf pins | 47 | ||
| Output current sunk by FTf pins | IIO | 22 | mA | FTf pins | 47 | ||
| Output current sourced by any I/O and control pin | IIO | -16 | mA | 47 | |||
| Total output current sunk by sum of all IOs and control pins | ΣIIO(PIN) | 90 | mA | 47 | |||
| Total output current sourced by sum of all IOs and control pins | ΣIIO(PIN) | -90 | mA | 47 | |||
| Injected current on FT, FTf, RST and B pins | IINJ(PIN) | -5 | 0 | mA | Injected current on FT, FTf, RST and B pins | 47 | |
| Injected current on TC pin | IINJ(PIN) | -5 | 5 | mA | Injected current on TC pin | 47 | |
| Total injected current (sum of all I/O and control pins) | ΣIINJ(PIN) | -25 | 25 | mA | Total injected current (sum of all I/O and control pins) | 47 | |
| Storage temperature range | TSTG | -65 | 150 | °C | 47 | ||
| Maximum junction temperature | TJ | 150 | °C | 47 | |||
| Internal AHB clock frequency | fHCLK | 0 | 32 | MHz | 48 | ||
| Internal APB1 clock frequency | fPCLK1 | 0 | 32 | MHz | 48 | ||
| Internal APB2 clock frequency | fPCLK2 | 0 | 32 | MHz | 48 | ||
| Standard operating voltage | VDD | 1.65 | 3.6 | V | BOR detector disabled | 48 | |
| Standard operating voltage | VDD | 1.8 | 3.6 | V | BOR detector enabled, at power on | 48 | |
| Analog operating voltage (all features) | VDDA | 1.65 | 3.6 | V | Must be the same voltage as VDD | 48 | |
| Input voltage on FT, FTf and RST pins | VIN | -0.3 | 5.5 | V | 2.0 V ≤ VDD ≤ 3.6 V | 48 | |
| Input voltage on FT, FTf and RST pins | VIN | -0.3 | 5.2 | V | 1.65 V ≤ VDD ≤ 2.0 V | 48 | |
| Input voltage on BOOT0 pin | VIN | 0 | 5.5 | V | 48 | ||
| Input voltage on TC pin | VIN | -0.3 | V | 48 | |||
| Power dissipation at TA = 85 °C (range 6) or TA = 105 °C (range 7), UFQFPN20 package | PD | 196 | mW | Power dissipation at TA = 85 °C (range 6) or TA = 105 °C (range 7) | 48 | ||
| Maximum power dissipation temperature range (range 6) | TA | -40 | 85 | °C | Maximum power dissipation (range 6) | 49 | |
| Maximum power dissipation temperature range (range 7) | TA | -40 | 105 | °C | Maximum power dissipation (range 7) | 49 | |
| Maximum power dissipation temperature range (range 3) | TA | -40 | 125 | °C | Maximum power dissipation (range 3) | 49 | |
| Junction temperature range (range 6) | TJ | -40 | 105 | °C | -40 °C ≤ TA ≤ 85 °C | 49 | |
| Junction temperature range (range 7) | TJ | -40 | 125 | °C | -40 °C ≤ TA ≤ 105 °C | 49 | |
| Junction temperature range (range 3) | TJ | -40 | 130 | °C | -40 °C ≤ TA ≤ 125 °C | 49 | |
| Power on/power down reset threshold | VPOR/PDR | 1 | 1.5 | 1.65 | V | Falling edge | 49 |
| Internal reference voltage | VREFINT out | 1.202 | 1.224 | 1.242 | V | -40 °C < TJ < +125 °C | 51 |
| Temperature coefficient | TCoeff | 25 | 100 | ppm/°C | -40 °C < TJ < +125 °C | 51 | |
| Supply current in Stop mode | IDD (Stop) | 0.34 | 0.99 | µA | TA = -40°C to 25°C | 59 | |
| Supply current in Stop mode | IDD (Stop) | 4.9 | 19 | µA | TA = 125°C | 59 | |
| Supply current in Standby mode | IDD (Standby) | 0.23 | 0.6 | µA | Independent watchdog and LSI OFF, TA = -40 °C to 25 °C | 60 | |
| Supply current in Standby mode | IDD (Standby) | 1.35 | 5 | µA | Independent watchdog and LSI OFF, TA = 125 °C | 60 | |
| Supply current in Run mode, code executed from Flash | IDD (Run from Flash) | 5.3 | 6.5 | mA | fHSE = fHCLK 32 MHz, Range 1, VCORE=1.8 V, VOS[1:0]=01 | 53 | |
| Supply current in Run mode, code executed from Flash | IDD (Run from Flash) | 2.1 | 2.4 | mA | 16 MHz, Range 2, VCORE=1.5 V, VOS[1:0]=10 | 53 | |
| Weak pull-up equivalent resistor (I/O) | RPU | 25 | 45 | 65 | kΩ | VIN = VSS | 75 |
| Weak pull-down equivalent resistor (I/O) | RPD | 25 | 45 | 65 | kΩ | VIN = VDD | 75 |
| Input leakage current (all I/Os except BOOT0 and FTf) | Ilkg | -50 | 50 | nA | VSS ≤ VIN ≤ VDD | 75 | |
| Weak pull-up equivalent resistor (NRST) | RPU | 25 | 45 | 65 | kΩ | VIN = VSS | 79 |
| NRST output low level voltage | VOL(NRST) | 0.4 | V | IOL = 2 mA, 2.7 V < VDD < 3.6 V | 79 | ||
| Accuracy of the factory-calibrated HSI16 oscillator | ACCHSI16 | -5.45 | 3.25 | % | VDDA = 1.65 V to 3.6 V, TA = -40 to 125 °C | 67 | |
| User external clock source frequency | fHSE_ext | 1 | 8 | 32 | MHz | CSS is ON or PLL is used | 64 |
| PLL input clock | fPLL_IN | 2 | 24 | MHz | 69 | ||
| Analog supply voltage for ADC ON (standard channels) | VDDA | 1.75 | 3.6 | V | Standard channels | 80 | |
| ADC clock frequency (voltage scaling Range 1) | fADC | 0.14 | 16 | MHz | Voltage scaling Range 1 | 80 | |
| Data retention mode (STOP mode or RESET) | VRM | 1.65 | V | STOP mode (or RESET) | 70 | ||
| Operating voltage (read / write / erase) | VDD | 1.65 | 3.6 | V | Read / Write / Erase | 71 | |
| Programming time for word or half-page (erasing) | tprog | 3.28 | 3.94 | ms | Erasing | 71 |
CAD (KiCad official)
- Symbol:
STM32L011F3U3TR - Footprint:
Package_DFN_QFN:ST_UFQFPN-20_3x3mm_P0.5mm - 3D model: UFQFPN-20(3x3) (KiCad packages3D, STEP)
- 3D model files:
stm32l011f3u3tr-etched.step/stm32l011f3u3tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32l011f3u3tr.step/stm32l011f3u3tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (119 pp, sha256
1271aa38a181c7a2, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).