main
Ray
Publish 0.1.0
3c4ee16
STM32L011D4P6TR
STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · TSSOP-14
STM32L011D4P6TR from STMicroelectronics, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PB9-BOOT0 | input | Dedicated BOOT0 pin (input only, FT-type) that selects the boot memory on this device. |
| 2 | PC14-OSC32_IN | bidirectional | 5 V tolerant FT I/O that serves as the OSC32_IN input of the 32 kHz oscillator. |
| 3 | PC15-OSC32_OUT | bidirectional | Standard 3.3 V TC I/O that serves as the OSC32_OUT output of the 32 kHz oscillator. |
| 4 | NRST | bidirectional | Bidirectional active-low reset pin with an embedded weak pull-up resistor, acting as device reset input and internal reset output. |
| 5 | PA0-CK_IN | bidirectional | 3.3 V tolerant TTa I/O directly connected to the ADC, also providing ADC_IN0, COMP1_INM and the CK_IN function after reset. |
| 6 | PA1 | bidirectional | 5 V tolerant FT I/O that also provides ADC_IN1 and COMP1_INP. |
| 7 | PA4 | bidirectional | 3.3 V tolerant TTa I/O directly connected to the ADC, also providing ADC_IN4, COMP1_INM and COMP2_INM. |
| 8 | PA7 | bidirectional | 5 V tolerant FT I/O that also provides ADC_IN7, COMP2_INP and SPI1_MOSI. |
| 9 | VSS | power_in | Digital and analog ground pin, referenced for all device voltages. |
| 10 | VDD | power_in | Digital power supply pin; on TSSOP14 the analog supply VDDA is internally connected to VDD. |
| 11 | PA9 | bidirectional | 5 V tolerant FTf I/O with Fast Mode Plus capability, also providing MCO, I2C1_SCL and USART2_TX. |
| 12 | PA10 | bidirectional | 5 V tolerant FTf I/O with Fast Mode Plus capability, also providing I2C1_SDA, USART2_RX and TIM21_CH1. |
| 13 | PA13 | bidirectional | 5 V tolerant FTf I/O with Fast Mode Plus capability, also providing SWDIO, I2C1_SDA and SPI1_SCK. |
| 14 | PA14 | bidirectional | 5 V tolerant FT I/O that also serves as SWCLK and, while the bootloader is active, as SPI1_MISO output. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | TSSOP-14 |
| Category | Embedded Processors & Controllers |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| External main supply voltage (including VDDA, VDD) | VDD-VSS | -0.3 | 4 | V | External main supply voltage (including VDDA, VDD) | 46 | |
| Input voltage on any other pin | VIN | -0.3 | 4 | V | Input voltage on any other pin | 46 | |
| Total current into sum of all VDD power lines (source) | ΣIVDD | 105 | mA | Total current into sum of all VDD power lines (source) | 47 | ||
| Total current out of sum of all VSS ground lines (sink) | ΣIVSS | 105 | mA | Total current out of sum of all VSS ground lines (sink) | 47 | ||
| Maximum current into each VDD power pin (source) | IVDD(PIN) | 100 | mA | Maximum current into each VDD power pin (source) | 47 | ||
| Maximum current out of each VSS ground pin (sink) | IVSS(PIN) | 100 | mA | Maximum current out of each VSS ground pin (sink) | 47 | ||
| Output current sunk by any I/O and control pin except FTf pins | IIO | 16 | mA | Output current sunk by any I/O and control pin except FTf pins | 47 | ||
| Output current sourced by any I/O and control pin | IIO | -16 | mA | Output current sourced by any I/O and control pin | 47 | ||
| Storage temperature range | TSTG | -65 | 150 | °C | Storage temperature range | 47 | |
| Maximum junction temperature | TJ | 150 | °C | Maximum junction temperature | 47 | ||
| Standard operating voltage | VDD | 1.65 | 3.6 | V | BOR detector disabled | 48 | |
| Standard operating voltage | VDD | 1.8 | 3.6 | V | BOR detector enabled, at power on | 48 | |
| Analog operating voltage (all features) | VDDA | 1.65 | 3.6 | V | Must be the same voltage as VDD | 48 | |
| Internal AHB clock frequency | fHCLK | 0 | 32 | MHz | 48 | ||
| Input voltage on BOOT0 pin | VIN | 0 | 5.5 | V | Input voltage on BOOT0 pin | 48 | |
| Power dissipation at TA = 85 °C (range 6), TSSOP14 package | PD | 210 | mW | TSSOP14 package | 48 | ||
| Power dissipation at TA = 125 °C (range 3), TSSOP14 package | PD | 53 | mW | TSSOP14 package | 48 | ||
| Ambient temperature range (range 3) | TA | -40 | 125 | °C | Maximum power dissipation (range 3) | 49 | |
| Junction temperature range (range 3) | TJ | -40 | 130 | °C | -40 °C ≤ TA ≤ 125 °C | 49 | |
| Power on/power down reset threshold, falling edge | VPOR/PDR | 1 | 1.5 | 1.65 | V | Falling edge | 49 |
| Internal reference voltage | VREFINT out | 1.202 | 1.224 | 1.242 | V | -40 °C < TJ < +125 °C | 51 |
| Temperature coefficient | TCoeff | 25 | 100 | ppm/°C | -40 °C < TJ < +125 °C | 51 | |
| Supply current in Standby mode, independent watchdog and LSI enabled | IDD (Standby) | 0.8 | 1.6 | µA | TA = -40 °C to 25 °C | 60 | |
| Supply current in Standby mode, independent watchdog and LSI OFF | IDD (Standby) | 0.23 | 0.6 | µA | TA = -40 °C to 25 °C | 60 | |
| Supply current in Stop mode | IDD (Stop) | 0.34 | 0.99 | µA | TA = -40°C to 25°C | 59 | |
| Weak pull-up equivalent resistor (I/O) | RPU | 25 | 45 | 65 | kΩ | VIN = VSS | 75 |
| Weak pull-down equivalent resistor (I/O) | RPD | 25 | 45 | 65 | kΩ | VIN = VDD | 75 |
| NRST weak pull-up equivalent resistor | RPU | 25 | 45 | 65 | kΩ | VIN = VSS | 79 |
| User external clock source frequency | fHSE_ext | 1 | 8 | 32 | MHz | CSS is ON or PLL is used | 64 |
| User external clock source frequency | fHSE_ext | 0 | 8 | 32 | MHz | CSS is OFF, PLL not used | 64 |
| Accuracy of the factory-calibrated HSI16 oscillator | ACCHSI16 | -5.45 | 3.25 | % | VDDA = 1.65 V to 3.6 V, TA = -40 to 125 °C | 67 | |
| LSI frequency | fLSI | 26 | 38 | 56 | kHz | 68 | |
| LSI oscillator frequency drift | DLSI | -10 | 4 | % | 0°C ≤ TA ≤ 85°C | 68 | |
| PLL input clock | fPLL_IN | 2 | 24 | MHz | 69 | ||
| Output low level voltage for an I/O pin CMOS port | VOL | 0.4 | V | IIO = +8 mA, 2.7 V ≤ VDD ≤ 3.6 V | 77 | ||
| Output high level voltage for an I/O pin TTL port | VOH | 2.4 | V | IIO = -6 mA, 2.7 V ≤ VDD ≤ 3.6 V | 77 | ||
| Operating voltage (Flash read/write/erase) | VDD | 1.65 | 3.6 | V | Read / Write / Erase | 71 | |
| Cycling (erase / write) program memory | NCYC | 10 | kcycles | TA = -40°C to 105 °C | 71 | ||
| Analog supply voltage for ADC ON, fast channel | VDDA | 1.65 | 3.6 | V | Fast channel | 80 | |
| Analog supply voltage for ADC ON, standard channels | VDDA | 1.75 | 3.6 | V | Standard channels | 80 | |
| Electrostatic discharge voltage (human body model) | VESD(HBM) | 2000 | V | TA = +25 °C, conforming to ANSI/JEDEC JS-001 | 73 |
CAD (KiCad official)
- Symbol:
STM32L011D4P6TR - Footprint:
Package_SO:TSSOP-14_4.4x5mm_P0.65mm - 3D model: TSSOP-14 (KiCad packages3D, STEP)
- 3D model files:
stm32l011d4p6tr-etched.step/stm32l011d4p6tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32l011d4p6tr.step/stm32l011d4p6tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (119 pp, sha256
1271aa38a181c7a2, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# STM32L011D4P6TR
**STMicroelectronics** · Microcontrollers (MCU/MPU/SOC) · TSSOP-14
STM32L011D4P6TR from STMicroelectronics, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PB9-BOOT0 | input | Dedicated BOOT0 pin (input only, FT-type) that selects the boot memory on this device. |
| 2 | PC14-OSC32_IN | bidirectional | 5 V tolerant FT I/O that serves as the OSC32_IN input of the 32 kHz oscillator. |
| 3 | PC15-OSC32_OUT | bidirectional | Standard 3.3 V TC I/O that serves as the OSC32_OUT output of the 32 kHz oscillator. |
| 4 | NRST | bidirectional | Bidirectional active-low reset pin with an embedded weak pull-up resistor, acting as device reset input and internal reset output. |
| 5 | PA0-CK_IN | bidirectional | 3.3 V tolerant TTa I/O directly connected to the ADC, also providing ADC_IN0, COMP1_INM and the CK_IN function after reset. |
| 6 | PA1 | bidirectional | 5 V tolerant FT I/O that also provides ADC_IN1 and COMP1_INP. |
| 7 | PA4 | bidirectional | 3.3 V tolerant TTa I/O directly connected to the ADC, also providing ADC_IN4, COMP1_INM and COMP2_INM. |
| 8 | PA7 | bidirectional | 5 V tolerant FT I/O that also provides ADC_IN7, COMP2_INP and SPI1_MOSI. |
| 9 | VSS | power_in | Digital and analog ground pin, referenced for all device voltages. |
| 10 | VDD | power_in | Digital power supply pin; on TSSOP14 the analog supply VDDA is internally connected to VDD. |
| 11 | PA9 | bidirectional | 5 V tolerant FTf I/O with Fast Mode Plus capability, also providing MCO, I2C1_SCL and USART2_TX. |
| 12 | PA10 | bidirectional | 5 V tolerant FTf I/O with Fast Mode Plus capability, also providing I2C1_SDA, USART2_RX and TIM21_CH1. |
| 13 | PA13 | bidirectional | 5 V tolerant FTf I/O with Fast Mode Plus capability, also providing SWDIO, I2C1_SDA and SPI1_SCK. |
| 14 | PA14 | bidirectional | 5 V tolerant FT I/O that also serves as SWCLK and, while the bootloader is active, as SPI1_MISO output. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | TSSOP-14 |
| Category | Embedded Processors & Controllers |
| Pins | 14 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| External main supply voltage (including VDDA, VDD) | VDD-VSS | -0.3 | | 4 | V | External main supply voltage (including VDDA, VDD) | 46 |
| Input voltage on any other pin | VIN | -0.3 | | 4 | V | Input voltage on any other pin | 46 |
| Total current into sum of all VDD power lines (source) | ΣIVDD | | | 105 | mA | Total current into sum of all VDD power lines (source) | 47 |
| Total current out of sum of all VSS ground lines (sink) | ΣIVSS | | | 105 | mA | Total current out of sum of all VSS ground lines (sink) | 47 |
| Maximum current into each VDD power pin (source) | IVDD(PIN) | | | 100 | mA | Maximum current into each VDD power pin (source) | 47 |
| Maximum current out of each VSS ground pin (sink) | IVSS(PIN) | | | 100 | mA | Maximum current out of each VSS ground pin (sink) | 47 |
| Output current sunk by any I/O and control pin except FTf pins | IIO | | | 16 | mA | Output current sunk by any I/O and control pin except FTf pins | 47 |
| Output current sourced by any I/O and control pin | IIO | -16 | | | mA | Output current sourced by any I/O and control pin | 47 |
| Storage temperature range | TSTG | -65 | | 150 | °C | Storage temperature range | 47 |
| Maximum junction temperature | TJ | | | 150 | °C | Maximum junction temperature | 47 |
| Standard operating voltage | VDD | 1.65 | | 3.6 | V | BOR detector disabled | 48 |
| Standard operating voltage | VDD | 1.8 | | 3.6 | V | BOR detector enabled, at power on | 48 |
| Analog operating voltage (all features) | VDDA | 1.65 | | 3.6 | V | Must be the same voltage as VDD | 48 |
| Internal AHB clock frequency | fHCLK | 0 | | 32 | MHz | | 48 |
| Input voltage on BOOT0 pin | VIN | 0 | | 5.5 | V | Input voltage on BOOT0 pin | 48 |
| Power dissipation at TA = 85 °C (range 6), TSSOP14 package | PD | | | 210 | mW | TSSOP14 package | 48 |
| Power dissipation at TA = 125 °C (range 3), TSSOP14 package | PD | | | 53 | mW | TSSOP14 package | 48 |
| Ambient temperature range (range 3) | TA | -40 | | 125 | °C | Maximum power dissipation (range 3) | 49 |
| Junction temperature range (range 3) | TJ | -40 | | 130 | °C | -40 °C ≤ TA ≤ 125 °C | 49 |
| Power on/power down reset threshold, falling edge | VPOR/PDR | 1 | 1.5 | 1.65 | V | Falling edge | 49 |
| Internal reference voltage | VREFINT out | 1.202 | 1.224 | 1.242 | V | -40 °C < TJ < +125 °C | 51 |
| Temperature coefficient | TCoeff | | 25 | 100 | ppm/°C | -40 °C < TJ < +125 °C | 51 |
| Supply current in Standby mode, independent watchdog and LSI enabled | IDD (Standby) | | 0.8 | 1.6 | µA | TA = -40 °C to 25 °C | 60 |
| Supply current in Standby mode, independent watchdog and LSI OFF | IDD (Standby) | | 0.23 | 0.6 | µA | TA = -40 °C to 25 °C | 60 |
| Supply current in Stop mode | IDD (Stop) | | 0.34 | 0.99 | µA | TA = -40°C to 25°C | 59 |
| Weak pull-up equivalent resistor (I/O) | RPU | 25 | 45 | 65 | kΩ | VIN = VSS | 75 |
| Weak pull-down equivalent resistor (I/O) | RPD | 25 | 45 | 65 | kΩ | VIN = VDD | 75 |
| NRST weak pull-up equivalent resistor | RPU | 25 | 45 | 65 | kΩ | VIN = VSS | 79 |
| User external clock source frequency | fHSE_ext | 1 | 8 | 32 | MHz | CSS is ON or PLL is used | 64 |
| User external clock source frequency | fHSE_ext | 0 | 8 | 32 | MHz | CSS is OFF, PLL not used | 64 |
| Accuracy of the factory-calibrated HSI16 oscillator | ACCHSI16 | -5.45 | | 3.25 | % | VDDA = 1.65 V to 3.6 V, TA = -40 to 125 °C | 67 |
| LSI frequency | fLSI | 26 | 38 | 56 | kHz | | 68 |
| LSI oscillator frequency drift | DLSI | -10 | | 4 | % | 0°C ≤ TA ≤ 85°C | 68 |
| PLL input clock | fPLL_IN | 2 | | 24 | MHz | | 69 |
| Output low level voltage for an I/O pin CMOS port | VOL | | | 0.4 | V | IIO = +8 mA, 2.7 V ≤ VDD ≤ 3.6 V | 77 |
| Output high level voltage for an I/O pin TTL port | VOH | 2.4 | | | V | IIO = -6 mA, 2.7 V ≤ VDD ≤ 3.6 V | 77 |
| Operating voltage (Flash read/write/erase) | VDD | 1.65 | | 3.6 | V | Read / Write / Erase | 71 |
| Cycling (erase / write) program memory | NCYC | 10 | | | kcycles | TA = -40°C to 105 °C | 71 |
| Analog supply voltage for ADC ON, fast channel | VDDA | 1.65 | | 3.6 | V | Fast channel | 80 |
| Analog supply voltage for ADC ON, standard channels | VDDA | 1.75 | | 3.6 | V | Standard channels | 80 |
| Electrostatic discharge voltage (human body model) | VESD(HBM) | | | 2000 | V | TA = +25 °C, conforming to ANSI/JEDEC JS-001 | 73 |
## CAD (KiCad official)
- Symbol: `STM32L011D4P6TR`
- Footprint: `Package_SO:TSSOP-14_4.4x5mm_P0.65mm`
- 3D model: TSSOP-14 (KiCad packages3D, STEP)
- 3D model files: `stm32l011d4p6tr-etched.step` / `stm32l011d4p6tr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32l011d4p6tr.step` / `stm32l011d4p6tr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [STMicroelectronics datasheet](https://www.st.com/resource/en/datasheet/stm32l011d4p6tr.pdf) (119 pp, sha256 `1271aa38a181c7a2`, retrieved 2026-11-05, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/stm32l011d4p6tr-datasheet.pdf)