Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

STM32L011D4P6TR

STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · TSSOP-14

STM32L011D4P6TR from STMicroelectronics, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PB9-BOOT0 input Dedicated BOOT0 pin (input only, FT-type) that selects the boot memory on this device.
2 PC14-OSC32_IN bidirectional 5 V tolerant FT I/O that serves as the OSC32_IN input of the 32 kHz oscillator.
3 PC15-OSC32_OUT bidirectional Standard 3.3 V TC I/O that serves as the OSC32_OUT output of the 32 kHz oscillator.
4 NRST bidirectional Bidirectional active-low reset pin with an embedded weak pull-up resistor, acting as device reset input and internal reset output.
5 PA0-CK_IN bidirectional 3.3 V tolerant TTa I/O directly connected to the ADC, also providing ADC_IN0, COMP1_INM and the CK_IN function after reset.
6 PA1 bidirectional 5 V tolerant FT I/O that also provides ADC_IN1 and COMP1_INP.
7 PA4 bidirectional 3.3 V tolerant TTa I/O directly connected to the ADC, also providing ADC_IN4, COMP1_INM and COMP2_INM.
8 PA7 bidirectional 5 V tolerant FT I/O that also provides ADC_IN7, COMP2_INP and SPI1_MOSI.
9 VSS power_in Digital and analog ground pin, referenced for all device voltages.
10 VDD power_in Digital power supply pin; on TSSOP14 the analog supply VDDA is internally connected to VDD.
11 PA9 bidirectional 5 V tolerant FTf I/O with Fast Mode Plus capability, also providing MCO, I2C1_SCL and USART2_TX.
12 PA10 bidirectional 5 V tolerant FTf I/O with Fast Mode Plus capability, also providing I2C1_SDA, USART2_RX and TIM21_CH1.
13 PA13 bidirectional 5 V tolerant FTf I/O with Fast Mode Plus capability, also providing SWDIO, I2C1_SDA and SPI1_SCK.
14 PA14 bidirectional 5 V tolerant FT I/O that also serves as SWCLK and, while the bootloader is active, as SPI1_MISO output.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package TSSOP-14
Category Embedded Processors & Controllers
Pins 14

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
External main supply voltage (including VDDA, VDD) VDD-VSS -0.3 4 V External main supply voltage (including VDDA, VDD) 46
Input voltage on any other pin VIN -0.3 4 V Input voltage on any other pin 46
Total current into sum of all VDD power lines (source) ΣIVDD 105 mA Total current into sum of all VDD power lines (source) 47
Total current out of sum of all VSS ground lines (sink) ΣIVSS 105 mA Total current out of sum of all VSS ground lines (sink) 47
Maximum current into each VDD power pin (source) IVDD(PIN) 100 mA Maximum current into each VDD power pin (source) 47
Maximum current out of each VSS ground pin (sink) IVSS(PIN) 100 mA Maximum current out of each VSS ground pin (sink) 47
Output current sunk by any I/O and control pin except FTf pins IIO 16 mA Output current sunk by any I/O and control pin except FTf pins 47
Output current sourced by any I/O and control pin IIO -16 mA Output current sourced by any I/O and control pin 47
Storage temperature range TSTG -65 150 °C Storage temperature range 47
Maximum junction temperature TJ 150 °C Maximum junction temperature 47
Standard operating voltage VDD 1.65 3.6 V BOR detector disabled 48
Standard operating voltage VDD 1.8 3.6 V BOR detector enabled, at power on 48
Analog operating voltage (all features) VDDA 1.65 3.6 V Must be the same voltage as VDD 48
Internal AHB clock frequency fHCLK 0 32 MHz 48
Input voltage on BOOT0 pin VIN 0 5.5 V Input voltage on BOOT0 pin 48
Power dissipation at TA = 85 °C (range 6), TSSOP14 package PD 210 mW TSSOP14 package 48
Power dissipation at TA = 125 °C (range 3), TSSOP14 package PD 53 mW TSSOP14 package 48
Ambient temperature range (range 3) TA -40 125 °C Maximum power dissipation (range 3) 49
Junction temperature range (range 3) TJ -40 130 °C -40 °C ≤ TA ≤ 125 °C 49
Power on/power down reset threshold, falling edge VPOR/PDR 1 1.5 1.65 V Falling edge 49
Internal reference voltage VREFINT out 1.202 1.224 1.242 V -40 °C < TJ < +125 °C 51
Temperature coefficient TCoeff 25 100 ppm/°C -40 °C < TJ < +125 °C 51
Supply current in Standby mode, independent watchdog and LSI enabled IDD (Standby) 0.8 1.6 µA TA = -40 °C to 25 °C 60
Supply current in Standby mode, independent watchdog and LSI OFF IDD (Standby) 0.23 0.6 µA TA = -40 °C to 25 °C 60
Supply current in Stop mode IDD (Stop) 0.34 0.99 µA TA = -40°C to 25°C 59
Weak pull-up equivalent resistor (I/O) RPU 25 45 65 kΩ VIN = VSS 75
Weak pull-down equivalent resistor (I/O) RPD 25 45 65 kΩ VIN = VDD 75
NRST weak pull-up equivalent resistor RPU 25 45 65 kΩ VIN = VSS 79
User external clock source frequency fHSE_ext 1 8 32 MHz CSS is ON or PLL is used 64
User external clock source frequency fHSE_ext 0 8 32 MHz CSS is OFF, PLL not used 64
Accuracy of the factory-calibrated HSI16 oscillator ACCHSI16 -5.45 3.25 % VDDA = 1.65 V to 3.6 V, TA = -40 to 125 °C 67
LSI frequency fLSI 26 38 56 kHz 68
LSI oscillator frequency drift DLSI -10 4 % 0°C ≤ TA ≤ 85°C 68
PLL input clock fPLL_IN 2 24 MHz 69
Output low level voltage for an I/O pin CMOS port VOL 0.4 V IIO = +8 mA, 2.7 V ≤ VDD ≤ 3.6 V 77
Output high level voltage for an I/O pin TTL port VOH 2.4 V IIO = -6 mA, 2.7 V ≤ VDD ≤ 3.6 V 77
Operating voltage (Flash read/write/erase) VDD 1.65 3.6 V Read / Write / Erase 71
Cycling (erase / write) program memory NCYC 10 kcycles TA = -40°C to 105 °C 71
Analog supply voltage for ADC ON, fast channel VDDA 1.65 3.6 V Fast channel 80
Analog supply voltage for ADC ON, standard channels VDDA 1.75 3.6 V Standard channels 80
Electrostatic discharge voltage (human body model) VESD(HBM) 2000 V TA = +25 °C, conforming to ANSI/JEDEC JS-001 73

CAD (KiCad official)

  • Symbol: STM32L011D4P6TR
  • Footprint: Package_SO:TSSOP-14_4.4x5mm_P0.65mm
  • 3D model: TSSOP-14 (KiCad packages3D, STEP)
  • 3D model files: stm32l011d4p6tr-etched.step / stm32l011d4p6tr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm32l011d4p6tr.step / stm32l011d4p6tr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (119 pp, sha256 1271aa38a181c7a2, retrieved 2026-11-05, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF