main
Ray Publish 0.1.0 20bb9cb
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793
{
  "slug": "stm32h7r3v8t6",
  "version": "0.1.0",
  "type": "component",
  "description": "ST Microcontroller Units (MCUs/MPUs/SOCs), LQFP-100(14x14). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "embedded processors & controllers",
    "stm32h7r3v8t6",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "stm32h7r3v8t6.kicad_sym",
    "stm32h7r3v8t6.kicad_mod",
    "stm32h7r3v8t6.glb",
    "stm32h7r3v8t6.step",
    "stm32h7r3v8t6.lbr",
    "docs/hero.png",
    "docs/stm32h7r3v8t6-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "stm32h7r3v8t6-hero.glb",
    "stm32h7r3v8t6-hero.overlay.json"
  ],
  "component": {
    "mpn": "STM32H7R3V8T6",
    "manufacturer": "ST",
    "package": "LQFP-100(14x14)",
    "pin_count": 100,
    "category": "Embedded Processors & Controllers",
    "subcategory": "Microcontroller Units (MCUs/MPUs/SOCs)",
    "datasheet": "https://mm.digikey.com/Volume0/opasdata/d220001/medias/docus/8909/stm32h7r3a8.pdf",
    "parts": {
      "symbol": "stm32h7r3v8t6.kicad_sym",
      "footprint": "stm32h7r3v8t6.kicad_mod",
      "model_3d": "stm32h7r3v8t6-hero.glb",
      "model_3d_plain": "stm32h7r3v8t6.glb",
      "model_3d_step": "stm32h7r3v8t6-etched.step",
      "model_3d_step_plain": "stm32h7r3v8t6.step",
      "lbr": "stm32h7r3v8t6.lbr"
    },
    "distributor_links": {
      "lcsc": "C22400329",
      "digikey": "497-STM32H7R3V8T6-ND",
      "mouser": "511-STM32H7R3V8T6"
    },
    "distributor_check": {
      "checked_at": "2026-11-13T21:35:28Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "497-STM32H7R3V8T6-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "511-STM32H7R3V8T6",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VBAT",
        "type": "power_in",
        "description": "Backup-domain supply, 1.2 V to 3.6 V."
      },
      {
        "number": "2",
        "name": "PC13",
        "type": "bidirectional",
        "description": "FT I/O supplied via the VSW power switch (3 mA max sink), output limited to 2 MHz with 30 pF max load; functions TAMP_IN1/TAMP_OUT2, RTC_OUT1/RTC_TS, WKUP3."
      },
      {
        "number": "3",
        "name": "PC14-OSC32_IN",
        "type": "bidirectional",
        "description": "I/O supplied via VSW (output limited to 2 MHz, 30 pF) and OSC32_IN LSE crystal input."
      },
      {
        "number": "4",
        "name": "PC15-OSC32_OUT",
        "type": "bidirectional",
        "description": "I/O supplied via VSW (output limited to 2 MHz, 30 pF) and OSC32_OUT LSE crystal output."
      },
      {
        "number": "5",
        "name": "PH0-OSC_IN",
        "type": "bidirectional",
        "description": "FT_h I/O, also OSC_IN HSE oscillator input."
      },
      {
        "number": "6",
        "name": "PH1-OSC_OUT",
        "type": "bidirectional",
        "description": "FT_h I/O, also OSC_OUT HSE oscillator output."
      },
      {
        "number": "7",
        "name": "NRST",
        "type": "input",
        "description": "Bidirectional reset pin with embedded weak pull-up resistor."
      },
      {
        "number": "8",
        "name": "VSS",
        "type": "power_in",
        "description": "Digital ground."
      },
      {
        "number": "9",
        "name": "VDD",
        "type": "power_in",
        "description": "Main digital supply, 1.71 V to 3.6 V."
      },
      {
        "number": "10",
        "name": "PC0",
        "type": "bidirectional",
        "description": "FT_h I/O with GFXTIM_FCKCAL, SAI2_FS_B, FMC_NBL1 alternate functions and ADC12_INP10 analog input."
      },
      {
        "number": "11",
        "name": "PC1",
        "type": "bidirectional",
        "description": "FT_h I/O with SPI2_MOSI/I2S2_SDO, SAI1_SD_A, ETH_MDC alternate functions; ADC12_INP11/INN10, TAMP_IN7/TAMP_OUT8, WKUP4."
      },
      {
        "number": "12",
        "name": "VSSA",
        "type": "power_in",
        "description": "Analog ground."
      },
      {
        "number": "13",
        "name": "VREFM",
        "type": "power_in",
        "description": "Negative reference voltage for ADC/VREFBUF."
      },
      {
        "number": "14",
        "name": "VREFP",
        "type": "power_in",
        "description": "Positive reference voltage for ADC/VREFBUF."
      },
      {
        "number": "15",
        "name": "VDDA",
        "type": "power_in",
        "description": "Analog supply, 1.62 V to 3.6 V with ADC used (2.10 V min with VREFBUF)."
      },
      {
        "number": "16",
        "name": "PA0",
        "type": "bidirectional",
        "description": "FT_h I/O with TIM2_CH1, TIM5_CH1, USART2_CTS, UART4_TX; ADC12_INP0/INN1, WKUP1."
      },
      {
        "number": "17",
        "name": "PA1",
        "type": "bidirectional",
        "description": "FT_h I/O with TIM2_CH2, TIM5_CH2, USART2_RTS, UART4_RX; ADC12_INP1."
      },
      {
        "number": "18",
        "name": "PA2",
        "type": "bidirectional",
        "description": "FT_h I/O with TIM2_CH3, USART2_TX, ETH_MDIO; ADC12_INP14, WKUP2."
      },
      {
        "number": "19",
        "name": "PA3",
        "type": "bidirectional",
        "description": "FT_h I/O with TIM2_CH4, TIM5_CH4, USART2_RX, LCD_DE; ADC12_INP15."
      },
      {
        "number": "20",
        "name": "VSS",
        "type": "power_in",
        "description": "Digital ground."
      },
      {
        "number": "21",
        "name": "PA4",
        "type": "bidirectional",
        "description": "FT_h I/O with SPI1_NSS/I2S1_WS, SPI3_NSS, USART2_CK, DCMIPP_HSYNC; ADC1_INP18."
      },
      {
        "number": "22",
        "name": "PA5",
        "type": "bidirectional",
        "description": "FT_h I/O with PWR_CSTOP, TIM2_CH1, SPI1_SCK, LCD_CLK; ADC2_INP18."
      },
      {
        "number": "23",
        "name": "VDD",
        "type": "power_in",
        "description": "Main digital supply, 1.71 V to 3.6 V."
      },
      {
        "number": "24",
        "name": "PA6",
        "type": "bidirectional",
        "description": "FT_h I/O with PWR_CSLEEP, TIM1_BKIN, TIM3_CH1, SPI1_MISO; ADC12_INP3."
      },
      {
        "number": "25",
        "name": "PA7",
        "type": "bidirectional",
        "description": "FT_h I/O with TIM1_CH1N, TIM3_CH2, SPI1_MOSI, ETH_MII_RX_DV; ADC12_INP7/INN3."
      },
      {
        "number": "26",
        "name": "PB0",
        "type": "bidirectional",
        "description": "FT_h I/O with TIM1_CH2N, TIM3_CH3, SPI1_SCK, UART4_CTS; ADC12_INP9/INN5."
      },
      {
        "number": "27",
        "name": "PB1",
        "type": "bidirectional",
        "description": "FT_h I/O with TIM1_CH3N, TIM3_CH4, FDCAN2_TX, FMC_NOE; ADC12_INP5."
      },
      {
        "number": "28",
        "name": "PB2",
        "type": "bidirectional",
        "description": "FT_h I/O with RTC_OUT2, SAI1_SD_A, SPI3_MOSI, FMC_NWE."
      },
      {
        "number": "29",
        "name": "PO1",
        "type": "bidirectional",
        "description": "FT_h I/O providing XSPIM_P1_NCS2."
      },
      {
        "number": "30",
        "name": "VDDXSPI1",
        "type": "power_in",
        "description": "Octo/Hexa-SPI port 1 I/O supply, 1.62 V to 3.6 V (HSLV=0)."
      },
      {
        "number": "31",
        "name": "VSS",
        "type": "power_in",
        "description": "Digital ground."
      },
      {
        "number": "32",
        "name": "PP4",
        "type": "bidirectional",
        "description": "FT_h I/O providing XSPIM_P1_IO4."
      },
      {
        "number": "33",
        "name": "PP2",
        "type": "bidirectional",
        "description": "FT_h I/O providing XSPIM_P1_IO2."
      },
      {
        "number": "34",
        "name": "PP3",
        "type": "bidirectional",
        "description": "FT_h I/O providing XSPIM_P1_IO3."
      },
      {
        "number": "35",
        "name": "VSS",
        "type": "power_in",
        "description": "Digital ground."
      },
      {
        "number": "36",
        "name": "VDDXSPI1",
        "type": "power_in",
        "description": "Octo/Hexa-SPI port 1 I/O supply, 1.62 V to 3.6 V (HSLV=0)."
      },
      {
        "number": "37",
        "name": "PO5",
        "type": "bidirectional",
        "description": "FT_h I/O providing XSPIM_P1_NCLK."
      },
      {
        "number": "38",
        "name": "PO4",
        "type": "bidirectional",
        "description": "FT_h I/O providing XSPIM_P1_CLK."
      },
      {
        "number": "39",
        "name": "PP5",
        "type": "bidirectional",
        "description": "FT_h I/O providing XSPIM_P1_IO5."
      },
      {
        "number": "40",
        "name": "PP0",
        "type": "bidirectional",
        "description": "FT_h I/O providing XSPIM_P1_IO0."
      },
      {
        "number": "41",
        "name": "VSS",
        "type": "power_in",
        "description": "Digital ground."
      },
      {
        "number": "42",
        "name": "VDDXSPI1",
        "type": "power_in",
        "description": "Octo/Hexa-SPI port 1 I/O supply, 1.62 V to 3.6 V (HSLV=0)."
      },
      {
        "number": "43",
        "name": "PP6",
        "type": "bidirectional",
        "description": "FT_h I/O providing XSPIM_P1_IO6."
      },
      {
        "number": "44",
        "name": "PO2",
        "type": "bidirectional",
        "description": "FT_h I/O providing XSPIM_P1_DQS0."
      },
      {
        "number": "45",
        "name": "PP7",
        "type": "bidirectional",
        "description": "FT_h I/O providing XSPIM_P1_IO7."
      },
      {
        "number": "46",
        "name": "PP1",
        "type": "bidirectional",
        "description": "FT_h I/O providing XSPIM_P1_IO1."
      },
      {
        "number": "47",
        "name": "VSS",
        "type": "power_in",
        "description": "Digital ground."
      },
      {
        "number": "48",
        "name": "VDDXSPI1",
        "type": "power_in",
        "description": "Octo/Hexa-SPI port 1 I/O supply, 1.62 V to 3.6 V (HSLV=0)."
      },
      {
        "number": "49",
        "name": "PO0",
        "type": "bidirectional",
        "description": "FT_h I/O providing XSPIM_P1_NCS1."
      },
      {
        "number": "50",
        "name": "PB10",
        "type": "bidirectional",
        "description": "FT_fh (Fm+) I/O with TIM2_CH3, I2C2_SCL, SPI2_SCK, USART3_TX, ETH_MII_RX_ER."
      },
      {
        "number": "51",
        "name": "PB11",
        "type": "bidirectional",
        "description": "FT_fh (Fm+) I/O with TIM2_CH4, I2C2_SDA, USART3_RX, ETH_MII_TX_EN."
      },
      {
        "number": "52",
        "name": "PB12",
        "type": "bidirectional",
        "description": "FT_h I/O with TIM1_BKIN, I2C2_SMBA, SPI2_NSS, USART3_CK, FDCAN2_RX."
      },
      {
        "number": "53",
        "name": "PB13",
        "type": "bidirectional",
        "description": "FT_h I/O with TIM1_CH1N, SPI2_SCK, SDMMC1_D0, USART3_CTS, FDCAN2_TX."
      },
      {
        "number": "54",
        "name": "PB14",
        "type": "bidirectional",
        "description": "FT_h I/O with TIM1_CH2N, USART1_TX, SPI2_MISO, USART3_RTS, SDMMC2_D0."
      },
      {
        "number": "55",
        "name": "PB15",
        "type": "bidirectional",
        "description": "FT_h I/O with RTC_REFIN, TIM1_CH3N, USART1_RX, SPI2_MOSI, SDMMC2_D1; PVD_IN."
      },
      {
        "number": "56",
        "name": "VCAP2",
        "type": "passive",
        "description": "Core regulator output; connect a 2.2 µF (±20%) capacitor with ESR below 100 mΩ."
      },
      {
        "number": "57",
        "name": "VSS",
        "type": "power_in",
        "description": "Digital ground."
      },
      {
        "number": "58",
        "name": "VDD",
        "type": "power_in",
        "description": "Main digital supply, 1.71 V to 3.6 V."
      },
      {
        "number": "59",
        "name": "PA8",
        "type": "bidirectional",
        "description": "FT_fh (Fm+) I/O with MCO1, TIM1_CH1, I2C3_SCL, USART1_CK, OTG_FS_SOF."
      },
      {
        "number": "60",
        "name": "PA9",
        "type": "bidirectional",
        "description": "FT_fh (Fm+) I/O with TIM1_CH2, LPUART1_TX, I2C3_SDA, SPI2_SCK, USART1_TX."
      },
      {
        "number": "61",
        "name": "PA10",
        "type": "bidirectional",
        "description": "FT_h I/O with TIM1_CH3, LPUART1_RX, USART1_RX, MDIOS_MDIO."
      },
      {
        "number": "62",
        "name": "PA11",
        "type": "bidirectional",
        "description": "FT_h I/O with TIM1_CH4, LPUART1_CTS, SPI2_NSS, UART4_RX, USART1_CTS, FDCAN1_RX."
      },
      {
        "number": "63",
        "name": "PA12",
        "type": "bidirectional",
        "description": "FT_h I/O with TIM1_ETR, LPUART1_RTS, SPI2_SCK, UART4_TX, USART1_RTS, FDCAN1_TX."
      },
      {
        "number": "64",
        "name": "PA13",
        "type": "bidirectional",
        "description": "FT_h I/O configured after reset as JTMS-SWDIO with internal pull-up active."
      },
      {
        "number": "65",
        "name": "PA14",
        "type": "bidirectional",
        "description": "FT_h I/O configured after reset as JTCK-SWCLK with internal pull-down active."
      },
      {
        "number": "66",
        "name": "PA15(JTDI)",
        "type": "bidirectional",
        "description": "FT_h I/O configured after reset as JTDI with internal pull-up active; also TIM2_CH1, SPI1_NSS, HDMI_CEC."
      },
      {
        "number": "67",
        "name": "VCAP3",
        "type": "passive",
        "description": "Core regulator output; connect a 2.2 µF (±20%) capacitor with ESR below 100 mΩ."
      },
      {
        "number": "68",
        "name": "VSS",
        "type": "power_in",
        "description": "Digital ground."
      },
      {
        "number": "69",
        "name": "VDD",
        "type": "power_in",
        "description": "Main digital supply, 1.71 V to 3.6 V."
      },
      {
        "number": "70",
        "name": "PC10",
        "type": "bidirectional",
        "description": "FT_h I/O with TIM1_BKIN, SPI3_SCK, USART3_TX, UART4_TX, SDMMC1_D2."
      },
      {
        "number": "71",
        "name": "PC11",
        "type": "bidirectional",
        "description": "FT_h I/O with SPI3_MISO, USART3_RX, UART4_RX, SDMMC1_D3."
      },
      {
        "number": "72",
        "name": "PC12",
        "type": "bidirectional",
        "description": "FT_h I/O with TRACED3, SPI3_MOSI, USART3_CK, UART5_TX, SDMMC1_CK."
      },
      {
        "number": "73",
        "name": "PM0",
        "type": "bidirectional",
        "description": "FT_uc I/O providing UCPD_CC1; UCPD dead-battery 5.1 kΩ pull-down can be active after reset."
      },
      {
        "number": "74",
        "name": "PM1",
        "type": "bidirectional",
        "description": "FT_uc I/O providing UCPD_CC2; UCPD dead-battery 5.1 kΩ pull-down can be active after reset."
      },
      {
        "number": "75",
        "name": "PM2",
        "type": "bidirectional",
        "description": "FT_ud I/O providing UCPD_DB1 (dead-battery control for CC1)."
      },
      {
        "number": "76",
        "name": "PM3",
        "type": "bidirectional",
        "description": "FT_ud I/O providing UCPD_DB2 (dead-battery control for CC2)."
      },
      {
        "number": "77",
        "name": "VDD50USB",
        "type": "power_in",
        "description": "USB regulator supply, 4.0 V to 5.5 V when the USB regulator is ON."
      },
      {
        "number": "78",
        "name": "VDD33USB",
        "type": "power_in",
        "description": "USB supply, 3.0 V to 3.6 V when USB is used."
      },
      {
        "number": "79",
        "name": "VSSUSB",
        "type": "power_in",
        "description": "USB ground."
      },
      {
        "number": "80",
        "name": "PM5",
        "type": "bidirectional",
        "description": "FT_u I/O providing OTG_HS_DM."
      },
      {
        "number": "81",
        "name": "PM6",
        "type": "bidirectional",
        "description": "FT_u I/O providing OTG_HS_DP."
      },
      {
        "number": "82",
        "name": "DVDD",
        "type": "power_in",
        "description": "USB OTG_HS PHY digital supply, 0.95 V to 1.4 V."
      },
      {
        "number": "83",
        "name": "PM8",
        "type": "bidirectional",
        "description": "FT_u I/O with UART7_RX and OTG_HS_VBUS."
      },
      {
        "number": "84",
        "name": "PM9",
        "type": "bidirectional",
        "description": "FT_u I/O with UART7_TX and OTG_HS_ID."
      },
      {
        "number": "85",
        "name": "VDD",
        "type": "power_in",
        "description": "Main digital supply, 1.71 V to 3.6 V."
      },
      {
        "number": "86",
        "name": "PM12",
        "type": "bidirectional",
        "description": "FT_u I/O with SPI5_NSS and OTG_FS_DM."
      },
      {
        "number": "87",
        "name": "PM11",
        "type": "bidirectional",
        "description": "FT_u I/O with SPI5_SCK and OTG_FS_DP."
      },
      {
        "number": "88",
        "name": "PM14",
        "type": "bidirectional",
        "description": "FT_u I/O with SPI5_MISO and OTG_FS_VBUS."
      },
      {
        "number": "89",
        "name": "PM13",
        "type": "bidirectional",
        "description": "FT_u I/O with SPI5_MOSI and OTG_FS_ID."
      },
      {
        "number": "90",
        "name": "BOOT0",
        "type": "input",
        "description": "Dedicated boot pin, input up to 9.0 V; additional function VPP."
      },
      {
        "number": "91",
        "name": "PB3",
        "type": "bidirectional",
        "description": "FT_h I/O with JTDO-SWO, TIM2_CH2, SPI1_SCK, SPI3_SCK, SDMMC2_D2."
      },
      {
        "number": "92",
        "name": "PB4",
        "type": "bidirectional",
        "description": "FT_h I/O configured after reset as NJTRST with internal pull-up active."
      },
      {
        "number": "93",
        "name": "PB5",
        "type": "bidirectional",
        "description": "FT_h I/O with TIM17_BKIN, TIM3_CH2, I2C1_SMBA, SPI1_MOSI, FDCAN2_RX."
      },
      {
        "number": "94",
        "name": "VCAP4",
        "type": "passive",
        "description": "Core regulator output; connect a 2.2 µF (±20%) capacitor with ESR below 100 mΩ."
      },
      {
        "number": "95",
        "name": "VSS",
        "type": "power_in",
        "description": "Digital ground."
      },
      {
        "number": "96",
        "name": "VDD",
        "type": "power_in",
        "description": "Main digital supply, 1.71 V to 3.6 V."
      },
      {
        "number": "97",
        "name": "PB6",
        "type": "bidirectional",
        "description": "FT_fh (Fm+) I/O with TIM16_CH1N, TIM4_CH1, I2C1_SCL/I3C1_SCL, USART1_TX, FDCAN2_TX."
      },
      {
        "number": "98",
        "name": "PB7",
        "type": "bidirectional",
        "description": "FT_fh (Fm+) I/O with TIM17_CH1N, TIM4_CH2, I2C1_SDA/I3C1_SDA, USART1_RX."
      },
      {
        "number": "99",
        "name": "PB8",
        "type": "bidirectional",
        "description": "FT_fh (Fm+) I/O with TIM16_CH1, TIM4_CH3, I2C1_SCL/I3C1_SCL, UART4_RX, FDCAN1_RX."
      },
      {
        "number": "100",
        "name": "PB9",
        "type": "bidirectional",
        "description": "FT_fh (Fm+) I/O with TIM17_CH1, TIM4_CH4, I2C1_SDA/I3C1_SDA, FDCAN1_TX; TAMP_IN2/TAMP_OUT1."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet text does not explicitly say which package the MPN suffix 'V...T6' maps to beyond the ; VCAP2, VCAP3 and VCAP4 are typed passive (external regulator capacitor pins); the datasheet only lab"
        ],
        "pages_sent": 136,
        "cost_usd": 1.2322,
        "at": "2026-11-13T21:35:11"
      },
      "datasheet": {
        "url": "https://mm.digikey.com/Volume0/opasdata/d220001/medias/docus/8909/stm32h7r3a8.pdf",
        "pages": 321,
        "sha256": "2a9876c2bb49d5c7",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 100,
        "described": 100,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "stm32h7r3v8t6.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          16.0,
          16.0,
          1.5
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "51720097260ffba41c3062f85f67623721102fa535901c47cb555a1f444feeb3",
        "checked": "2026-11-13",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "stm32h7r3v8t6-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          16.0,
          16.0,
          1.5
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "c1eef033a153fca024dedf33a12fbdf80f6a874b69a3c92d883d767cefab8a34",
        "checked": "2026-11-13",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "LQFP100 (1L)",
      "source_page": 288,
      "D": {
        "nom_mm": 14.0,
        "range_mm": [
          null,
          null
        ]
      },
      "E1": {
        "nom_mm": 14.0,
        "range_mm": [
          null,
          null
        ]
      },
      "E": {
        "nom_mm": 16.0,
        "range_mm": [
          null,
          null
        ]
      },
      "e": {
        "nom_mm": 0.5,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 1.5,
        "range_mm": [
          null,
          1.6
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "stm32h7r3v8t6.step",
        "verdict": "PASS",
        "reasons": [
          "height and body within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}