component
STM32H7R3V8T6
Public Made by Adomby adom
ST Microcontroller Units (MCUs/MPUs/SOCs), LQFP-100(14x14). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
STM32H7R3V8T6
ST · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-100(14x14)
STM32H7R3V8T6 from ST, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VBAT | power_in | Backup-domain supply, 1.2 V to 3.6 V. |
| 2 | PC13 | bidirectional | FT I/O supplied via the VSW power switch (3 mA max sink), output limited to 2 MHz with 30 pF max load; functions TAMP_IN1/TAMP_OUT2, RTC_OUT1/RTC_TS, WKUP3. |
| 3 | PC14-OSC32_IN | bidirectional | I/O supplied via VSW (output limited to 2 MHz, 30 pF) and OSC32_IN LSE crystal input. |
| 4 | PC15-OSC32_OUT | bidirectional | I/O supplied via VSW (output limited to 2 MHz, 30 pF) and OSC32_OUT LSE crystal output. |
| 5 | PH0-OSC_IN | bidirectional | FT_h I/O, also OSC_IN HSE oscillator input. |
| 6 | PH1-OSC_OUT | bidirectional | FT_h I/O, also OSC_OUT HSE oscillator output. |
| 7 | NRST | input | Bidirectional reset pin with embedded weak pull-up resistor. |
| 8 | VSS | power_in | Digital ground. |
| 9 | VDD | power_in | Main digital supply, 1.71 V to 3.6 V. |
| 10 | PC0 | bidirectional | FT_h I/O with GFXTIM_FCKCAL, SAI2_FS_B, FMC_NBL1 alternate functions and ADC12_INP10 analog input. |
| 11 | PC1 | bidirectional | FT_h I/O with SPI2_MOSI/I2S2_SDO, SAI1_SD_A, ETH_MDC alternate functions; ADC12_INP11/INN10, TAMP_IN7/TAMP_OUT8, WKUP4. |
| 12 | VSSA | power_in | Analog ground. |
| 13 | VREFM | power_in | Negative reference voltage for ADC/VREFBUF. |
| 14 | VREFP | power_in | Positive reference voltage for ADC/VREFBUF. |
| 15 | VDDA | power_in | Analog supply, 1.62 V to 3.6 V with ADC used (2.10 V min with VREFBUF). |
| 16 | PA0 | bidirectional | FT_h I/O with TIM2_CH1, TIM5_CH1, USART2_CTS, UART4_TX; ADC12_INP0/INN1, WKUP1. |
| 17 | PA1 | bidirectional | FT_h I/O with TIM2_CH2, TIM5_CH2, USART2_RTS, UART4_RX; ADC12_INP1. |
| 18 | PA2 | bidirectional | FT_h I/O with TIM2_CH3, USART2_TX, ETH_MDIO; ADC12_INP14, WKUP2. |
| 19 | PA3 | bidirectional | FT_h I/O with TIM2_CH4, TIM5_CH4, USART2_RX, LCD_DE; ADC12_INP15. |
| 20 | VSS | power_in | Digital ground. |
| 21 | PA4 | bidirectional | FT_h I/O with SPI1_NSS/I2S1_WS, SPI3_NSS, USART2_CK, DCMIPP_HSYNC; ADC1_INP18. |
| 22 | PA5 | bidirectional | FT_h I/O with PWR_CSTOP, TIM2_CH1, SPI1_SCK, LCD_CLK; ADC2_INP18. |
| 23 | VDD | power_in | Main digital supply, 1.71 V to 3.6 V. |
| 24 | PA6 | bidirectional | FT_h I/O with PWR_CSLEEP, TIM1_BKIN, TIM3_CH1, SPI1_MISO; ADC12_INP3. |
| 25 | PA7 | bidirectional | FT_h I/O with TIM1_CH1N, TIM3_CH2, SPI1_MOSI, ETH_MII_RX_DV; ADC12_INP7/INN3. |
| 26 | PB0 | bidirectional | FT_h I/O with TIM1_CH2N, TIM3_CH3, SPI1_SCK, UART4_CTS; ADC12_INP9/INN5. |
| 27 | PB1 | bidirectional | FT_h I/O with TIM1_CH3N, TIM3_CH4, FDCAN2_TX, FMC_NOE; ADC12_INP5. |
| 28 | PB2 | bidirectional | FT_h I/O with RTC_OUT2, SAI1_SD_A, SPI3_MOSI, FMC_NWE. |
| 29 | PO1 | bidirectional | FT_h I/O providing XSPIM_P1_NCS2. |
| 30 | VDDXSPI1 | power_in | Octo/Hexa-SPI port 1 I/O supply, 1.62 V to 3.6 V (HSLV=0). |
| 31 | VSS | power_in | Digital ground. |
| 32 | PP4 | bidirectional | FT_h I/O providing XSPIM_P1_IO4. |
| 33 | PP2 | bidirectional | FT_h I/O providing XSPIM_P1_IO2. |
| 34 | PP3 | bidirectional | FT_h I/O providing XSPIM_P1_IO3. |
| 35 | VSS | power_in | Digital ground. |
| 36 | VDDXSPI1 | power_in | Octo/Hexa-SPI port 1 I/O supply, 1.62 V to 3.6 V (HSLV=0). |
| 37 | PO5 | bidirectional | FT_h I/O providing XSPIM_P1_NCLK. |
| 38 | PO4 | bidirectional | FT_h I/O providing XSPIM_P1_CLK. |
| 39 | PP5 | bidirectional | FT_h I/O providing XSPIM_P1_IO5. |
| 40 | PP0 | bidirectional | FT_h I/O providing XSPIM_P1_IO0. |
| 41 | VSS | power_in | Digital ground. |
| 42 | VDDXSPI1 | power_in | Octo/Hexa-SPI port 1 I/O supply, 1.62 V to 3.6 V (HSLV=0). |
| 43 | PP6 | bidirectional | FT_h I/O providing XSPIM_P1_IO6. |
| 44 | PO2 | bidirectional | FT_h I/O providing XSPIM_P1_DQS0. |
| 45 | PP7 | bidirectional | FT_h I/O providing XSPIM_P1_IO7. |
| 46 | PP1 | bidirectional | FT_h I/O providing XSPIM_P1_IO1. |
| 47 | VSS | power_in | Digital ground. |
| 48 | VDDXSPI1 | power_in | Octo/Hexa-SPI port 1 I/O supply, 1.62 V to 3.6 V (HSLV=0). |
| 49 | PO0 | bidirectional | FT_h I/O providing XSPIM_P1_NCS1. |
| 50 | PB10 | bidirectional | FT_fh (Fm+) I/O with TIM2_CH3, I2C2_SCL, SPI2_SCK, USART3_TX, ETH_MII_RX_ER. |
| 51 | PB11 | bidirectional | FT_fh (Fm+) I/O with TIM2_CH4, I2C2_SDA, USART3_RX, ETH_MII_TX_EN. |
| 52 | PB12 | bidirectional | FT_h I/O with TIM1_BKIN, I2C2_SMBA, SPI2_NSS, USART3_CK, FDCAN2_RX. |
| 53 | PB13 | bidirectional | FT_h I/O with TIM1_CH1N, SPI2_SCK, SDMMC1_D0, USART3_CTS, FDCAN2_TX. |
| 54 | PB14 | bidirectional | FT_h I/O with TIM1_CH2N, USART1_TX, SPI2_MISO, USART3_RTS, SDMMC2_D0. |
| 55 | PB15 | bidirectional | FT_h I/O with RTC_REFIN, TIM1_CH3N, USART1_RX, SPI2_MOSI, SDMMC2_D1; PVD_IN. |
| 56 | VCAP2 | passive | Core regulator output; connect a 2.2 µF (±20%) capacitor with ESR below 100 mΩ. |
| 57 | VSS | power_in | Digital ground. |
| 58 | VDD | power_in | Main digital supply, 1.71 V to 3.6 V. |
| 59 | PA8 | bidirectional | FT_fh (Fm+) I/O with MCO1, TIM1_CH1, I2C3_SCL, USART1_CK, OTG_FS_SOF. |
| 60 | PA9 | bidirectional | FT_fh (Fm+) I/O with TIM1_CH2, LPUART1_TX, I2C3_SDA, SPI2_SCK, USART1_TX. |
| 61 | PA10 | bidirectional | FT_h I/O with TIM1_CH3, LPUART1_RX, USART1_RX, MDIOS_MDIO. |
| 62 | PA11 | bidirectional | FT_h I/O with TIM1_CH4, LPUART1_CTS, SPI2_NSS, UART4_RX, USART1_CTS, FDCAN1_RX. |
| 63 | PA12 | bidirectional | FT_h I/O with TIM1_ETR, LPUART1_RTS, SPI2_SCK, UART4_TX, USART1_RTS, FDCAN1_TX. |
| 64 | PA13 | bidirectional | FT_h I/O configured after reset as JTMS-SWDIO with internal pull-up active. |
| 65 | PA14 | bidirectional | FT_h I/O configured after reset as JTCK-SWCLK with internal pull-down active. |
| 66 | PA15(JTDI) | bidirectional | FT_h I/O configured after reset as JTDI with internal pull-up active; also TIM2_CH1, SPI1_NSS, HDMI_CEC. |
| 67 | VCAP3 | passive | Core regulator output; connect a 2.2 µF (±20%) capacitor with ESR below 100 mΩ. |
| 68 | VSS | power_in | Digital ground. |
| 69 | VDD | power_in | Main digital supply, 1.71 V to 3.6 V. |
| 70 | PC10 | bidirectional | FT_h I/O with TIM1_BKIN, SPI3_SCK, USART3_TX, UART4_TX, SDMMC1_D2. |
| 71 | PC11 | bidirectional | FT_h I/O with SPI3_MISO, USART3_RX, UART4_RX, SDMMC1_D3. |
| 72 | PC12 | bidirectional | FT_h I/O with TRACED3, SPI3_MOSI, USART3_CK, UART5_TX, SDMMC1_CK. |
| 73 | PM0 | bidirectional | FT_uc I/O providing UCPD_CC1; UCPD dead-battery 5.1 kΩ pull-down can be active after reset. |
| 74 | PM1 | bidirectional | FT_uc I/O providing UCPD_CC2; UCPD dead-battery 5.1 kΩ pull-down can be active after reset. |
| 75 | PM2 | bidirectional | FT_ud I/O providing UCPD_DB1 (dead-battery control for CC1). |
| 76 | PM3 | bidirectional | FT_ud I/O providing UCPD_DB2 (dead-battery control for CC2). |
| 77 | VDD50USB | power_in | USB regulator supply, 4.0 V to 5.5 V when the USB regulator is ON. |
| 78 | VDD33USB | power_in | USB supply, 3.0 V to 3.6 V when USB is used. |
| 79 | VSSUSB | power_in | USB ground. |
| 80 | PM5 | bidirectional | FT_u I/O providing OTG_HS_DM. |
| 81 | PM6 | bidirectional | FT_u I/O providing OTG_HS_DP. |
| 82 | DVDD | power_in | USB OTG_HS PHY digital supply, 0.95 V to 1.4 V. |
| 83 | PM8 | bidirectional | FT_u I/O with UART7_RX and OTG_HS_VBUS. |
| 84 | PM9 | bidirectional | FT_u I/O with UART7_TX and OTG_HS_ID. |
| 85 | VDD | power_in | Main digital supply, 1.71 V to 3.6 V. |
| 86 | PM12 | bidirectional | FT_u I/O with SPI5_NSS and OTG_FS_DM. |
| 87 | PM11 | bidirectional | FT_u I/O with SPI5_SCK and OTG_FS_DP. |
| 88 | PM14 | bidirectional | FT_u I/O with SPI5_MISO and OTG_FS_VBUS. |
| 89 | PM13 | bidirectional | FT_u I/O with SPI5_MOSI and OTG_FS_ID. |
| 90 | BOOT0 | input | Dedicated boot pin, input up to 9.0 V; additional function VPP. |
| 91 | PB3 | bidirectional | FT_h I/O with JTDO-SWO, TIM2_CH2, SPI1_SCK, SPI3_SCK, SDMMC2_D2. |
| 92 | PB4 | bidirectional | FT_h I/O configured after reset as NJTRST with internal pull-up active. |
| 93 | PB5 | bidirectional | FT_h I/O with TIM17_BKIN, TIM3_CH2, I2C1_SMBA, SPI1_MOSI, FDCAN2_RX. |
| 94 | VCAP4 | passive | Core regulator output; connect a 2.2 µF (±20%) capacitor with ESR below 100 mΩ. |
| 95 | VSS | power_in | Digital ground. |
| 96 | VDD | power_in | Main digital supply, 1.71 V to 3.6 V. |
| 97 | PB6 | bidirectional | FT_fh (Fm+) I/O with TIM16_CH1N, TIM4_CH1, I2C1_SCL/I3C1_SCL, USART1_TX, FDCAN2_TX. |
| 98 | PB7 | bidirectional | FT_fh (Fm+) I/O with TIM17_CH1N, TIM4_CH2, I2C1_SDA/I3C1_SDA, USART1_RX. |
| 99 | PB8 | bidirectional | FT_fh (Fm+) I/O with TIM16_CH1, TIM4_CH3, I2C1_SCL/I3C1_SCL, UART4_RX, FDCAN1_RX. |
| 100 | PB9 | bidirectional | FT_fh (Fm+) I/O with TIM17_CH1, TIM4_CH4, I2C1_SDA/I3C1_SDA, FDCAN1_TX; TAMP_IN2/TAMP_OUT1. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ST |
| Package | LQFP-100(14x14) |
| Category | Embedded Processors & Controllers |
| Pins | 100 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| External main supply voltage (VDD, VDDSMPS, VDDA, VDDUSB, VDDXSPIx, VBAT, VREF+) abs max | VDDX-VSS | -0.3 | 4 | V | 152 | ||
| Input voltage on TT_xx pins | VIN | -0.3 | 4 | V | VSS-0.3 to 4.0 | 152 | |
| Input voltage on BOOT0 pin | VIN | 0 | 9 | V | VSS to 9.0 | 152 | |
| Total current into all VDD lines | ΣIVDD | 620 | mA | source | 153 | ||
| Total current out of all VSS lines | ΣIVSS | 620 | mA | sink | 153 | ||
| Max current per VDD pin | IVDD | 100 | mA | source | 153 | ||
| Max current per VSS pin | IVSS | 100 | mA | sink | 153 | ||
| Output current per I/O | IIO | 20 | mA | any I/O and control pin, except Pxy_C | 153 | ||
| Storage temperature | TSTG | -65 | 150 | °C | 153 | ||
| Maximum junction temperature | TJ | 130 | °C | Industrial temperature range 6; limited to 105 °C in VOS high | 153 | ||
| Standard operating voltage | VDD | 1.71 | 3.6 | V | HSLV=0 | 154 | |
| Standard operating voltage | VDD | 1.71 | 2.7 | V | HSLV=1 | 154 | |
| Supply voltage for internal regulator | VDDLDO | 1.71 | 3.6 | V | 154 | ||
| Supply voltage for SMPS | VDDSMPS | 1.71 | 3.6 | V | 154 | ||
| Octo and HexaSPI supply | VDDXSPIx | 1.62 | 3.6 | V | HSLV=0 | 154 | |
| Octo and HexaSPI supply | VDDXSPIx | 1.08 | 2.7 | V | HSLV=1 | 154 | |
| USB supply voltage | VDD50USB | 4 | 5 | 5.5 | V | USB regulator ON | 154 |
| USB supply voltage | VDD33USB | 3 | 3.6 | V | USB used | 154 | |
| Analog operating voltage | VDDA | 1.62 | 3.6 | V | ADC used | 154 | |
| Analog operating voltage | VDDA | 2.1 | 3.6 | V | VREFBUF used | 154 | |
| Backup domain supply voltage | VBAT | 1.2 | 3.6 | V | 154 | ||
| BOOT0 input voltage | VIN | -0.3 | 9 | V | BOOT0 | 154 | |
| VCORE internal regulator ON | VCORE | 1.15 | 1.21 | 1.26 | V | VOS low | 154 |
| VCORE internal regulator ON | VCORE | 1.15 | 1.36 | 1.4 | V | VOS high | 154 |
| USB OTG_HS PHY digital supply voltage | DVDD | 0.95 | 1.4 | V | 154 | ||
| CPU clock frequency | fCPU | 600 | MHz | VOS high (400 for VOS low) | 155 | ||
| Ambient temperature | TA | -40 | 85 | °C | Maximum power dissipation | 155 | |
| Junction temperature | TJ | -40 | 105 | °C | VOS high | 155 | |
| Junction temperature | TJ | -40 | 130 | °C | VOS low | 155 | |
| POR/PDR threshold rising | VBOR0/POR/PDR | 1.62 | 1.67 | 1.71 | V | Rising edge | 162 |
| POR/PDR threshold falling | VBOR0/POR/PDR | 1.58 | 1.62 | 1.68 | V | Falling edge | 162 |
| Reset temporization | tRSTTEMPO | 377 | 550 | µs | after BOR0 released | 162 | |
| Internal reference voltage | VREFINT | 1.18 | 1.216 | 1.255 | V | -40°C < TJ < TJmax | 164 |
| SMPS output voltage | VOUT | 1.62 | 1.8 | 1.98 | V | Iout=600 mA | 158 |
| SMPS input voltage | VDDSMPS | 2.3 | 3.6 | V | VOUT = 1.8 V | 158 | |
| SMPS output current | IOUT | 600 | mA | External usage only | 158 | ||
| Run mode supply current, VOS high 600 MHz | IDD | 125 | 135 | mA | All peripherals disabled, ITCM, LDO, TJ = 25°C max | 166 |
CAD (KiCad official)
- Symbol:
STM32H7R3V8T6 - Footprint:
Package_QFP:LQFP-100_14x14mm_P0.5mm - 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)
- 3D model files:
stm32h7r3v8t6-etched.step/stm32h7r3v8t6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32h7r3v8t6.step/stm32h7r3v8t6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: ST datasheet (321 pp, sha256
2a9876c2bb49d5c7, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).