← Commit history
README.md+112−103
@@ -2,112 +2,112 @@  **STMicroelectronics** · Microcontrollers (MCU/MPU/SOC) · LQFP-100(14x14) -STM32H743VIT6 from STMicroelectronics, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.+STM32H743VIT6 from STMicroelectronics, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.  ## Pinout  | Pin | Name | Type | Function | |---|---|---|---|-| 1 | PE2 | bidirectional | GPIO port E pin 2, 5V tolerant I/O with high-speed low-voltage option, supports TRACECLK, SAI1_CK1, SPI4_SCK and multiple alternate functions including FMC address and LCD controller signals. |-| 2 | PE3 | bidirectional | GPIO port E pin 3, 5V tolerant I/O with high-speed low-voltage option, supports TRACED0, TIM15_BKIN, SAI1_SD_B and FMC address signals. |-| 3 | PE4 | bidirectional | GPIO port E pin 4, 5V tolerant I/O with high-speed low-voltage option, supports TRACED1, SAI1_D2, SPI4_NSS and DCMI/LCD control signals. |-| 4 | PE5 | bidirectional | GPIO port E pin 5, 5V tolerant I/O with high-speed low-voltage option, supports TRACED2, SAI1_CK2, SPI4_MISO and DCMI/LCD signals. |-| 5 | PE6 | bidirectional | GPIO port E pin 6, 5V tolerant I/O with high-speed low-voltage option, supports TRACED3, TIM1_BKIN2, SAI1_D1 and FMC/LCD signals. |-| 6 | VBAT | power_in | Battery backup supply voltage input, 1.2 to 3.6V for backup domain power supply. |-| 7 | PC13 | bidirectional | GPIO port C pin 13, 5V tolerant I/O, supports RTC_TAMP1/WKUP2 and external interrupt capability. |-| 8 | PC14-OSC32_IN | bidirectional | GPIO port C pin 14 / 32.768 kHz oscillator input, 5V tolerant I/O, functions as external oscillator input when configured. |-| 9 | PC15-OSC32_OUT | bidirectional | GPIO port C pin 15 / 32.768 kHz oscillator output, 5V tolerant I/O, functions as external oscillator output when configured. |-| 10 | VSS | power_in | Ground return path for digital circuits. |-| 11 | VDD | power_in | Main power supply voltage input, 1.62 to 3.6V, requires 100nF decoupling capacitor. |-| 12 | PH0-OSC_IN | bidirectional | GPIO port H pin 0 / main oscillator input, 5V tolerant I/O, supports external oscillator (4-48 MHz HSE). |-| 13 | PH1-OSC_OUT | bidirectional | GPIO port H pin 1 / main oscillator output, 5V tolerant I/O, supports external oscillator output. |-| 14 | NRST | bidirectional | Reset input pin with embedded weak pull-up resistor and Schmitt trigger, active low reset, 5V tolerant. |-| 15 | PC0 | bidirectional | GPIO port C pin 0, 5V tolerant analog/digital I/O, supports ADC123_INP10, DFSDM1_CKIN0 and FMC/LCD signals. |-| 16 | PC1 | bidirectional | GPIO port C pin 1, 5V tolerant I/O with high-speed low-voltage option, supports ADC123 inputs, DFSDM signals and SDMMC/ETH peripherals. |-| 17 | PC2_C | bidirectional | Analog-only GPIO port C pin 2, 3.3V tolerant, provides access to ADC3_INN1 and ADC3_INP0 when analog switch is open. |-| 18 | PC3_C | bidirectional | Analog-only GPIO port C pin 3, 3.3V tolerant, provides access to ADC3_INP1 when analog switch is open. |-| 19 | VSSA | power_in | Analog ground return path, must be connected to VSS externally. |-| 20 | VREF+ | power_in | Positive reference voltage for ADC, 1.62 to 3.6V, requires 100nF + 1µF decoupling capacitors. |-| 21 | VDDA | power_in | Analog power supply voltage, 1.62 to 3.6V for ADC/DAC/OPAMP/COMP operation, requires 100nF + 1µF capacitors. |-| 22 | PA0 | bidirectional | GPIO port A pin 0, 5V tolerant analog I/O, supports ADC1_INP16, WKUP0, timer and UART signals, DAC1_OUT1. |-| 23 | PA1 | bidirectional | GPIO port A pin 1, 5V tolerant I/O with high-speed low-voltage option, supports ADC1 inputs, timer and UART signals. |-| 24 | PA2 | bidirectional | GPIO port A pin 2, 5V tolerant analog I/O, supports ADC12_INP14, WKUP1, timer and UART signals. |-| 25 | PA3 | bidirectional | GPIO port A pin 3, 5V tolerant I/O with high-speed low-voltage option, supports ADC12_INP15, timer, UART and LCD signals. |-| 26 | VSS | power_in | Ground return path for digital circuits. |-| 27 | VDD | power_in | Main power supply voltage input, 1.62 to 3.6V, requires 100nF decoupling capacitor. |-| 28 | PA4 | bidirectional | GPIO port A pin 4, 3.3V tolerant analog I/O, supports ADC12_INP18, DAC1_OUT1, D1PWREN and SPI/SAI signals, internal pull-up/pull-down must be disabled for voltages above 3.3V. |-| 29 | PA5 | bidirectional | GPIO port A pin 5, 3.3V tolerant I/O with high-speed low-voltage option, supports ADC12 inputs, DAC1_OUT2, D2PWREN and SPI signals, internal pull-up/pull-down must be disabled for voltages above 3.3V. |-| 30 | PA6 | bidirectional | GPIO port A pin 6, 5V tolerant analog I/O, supports ADC12_INP3, SPI/timer signals and OPAMP1_VINM. |-| 31 | PA7 | bidirectional | GPIO port A pin 7, 3.3V tolerant analog I/O, supports ADC12 inputs, SPI signals, OPAMP1_VINM and Ethernet control. |-| 32 | PC4 | bidirectional | GPIO port C pin 4, 3.3V tolerant analog I/O, supports ADC12_INP4, OPAMP1_VOUT, COMP1_INM and Ethernet signals. |-| 33 | PC5 | bidirectional | GPIO port C pin 5, 3.3V tolerant analog I/O, supports ADC12 inputs, OPAMP1_VINM, COMP1_OUT and Ethernet signals. |-| 34 | PB0 | bidirectional | GPIO port B pin 0, 5V tolerant analog I/O, supports ADC12 inputs, OPAMP1_VINP, COMP1_INP and timer/UART signals. |-| 35 | PB1 | bidirectional | GPIO port B pin 1, 3.3V tolerant USB I/O, supports ADC12_INP5, COMP1_INM and timer signals. |-| 36 | PB2 | bidirectional | GPIO port B pin 2, 5V tolerant I/O with high-speed low-voltage option, supports COMP1_INP, RTC_OUT and SAI/SPI signals. |-| 37 | PE7 | bidirectional | GPIO port E pin 7, 3.3V tolerant I/O with high-speed low-voltage option, supports OPAMP2_VOUT, COMP2_INM and UART/QUADSPI signals. |-| 38 | PE8 | bidirectional | GPIO port E pin 8, 3.3V tolerant I/O with high-speed low-voltage option, supports OPAMP2_VINM, COMP2_OUT and UART/QUADSPI signals. |-| 39 | PE9 | bidirectional | GPIO port E pin 9, 3.3V tolerant I/O with high-speed low-voltage option, supports OPAMP2_VINP, COMP2_INP and UART/QUADSPI signals. |-| 40 | PE10 | bidirectional | GPIO port E pin 10, 5V tolerant I/O with high-speed low-voltage option, supports COMP2_INM and UART/QUADSPI signals. |-| 41 | PE11 | bidirectional | GPIO port E pin 11, 5V tolerant I/O with high-speed low-voltage option, supports COMP2_INP and SAI/SPI signals. |-| 42 | PE12 | bidirectional | GPIO port E pin 12, 5V tolerant I/O with high-speed low-voltage option, supports COMP1_OUT and SPI/SAI signals. |-| 43 | PE13 | bidirectional | GPIO port E pin 13, 5V tolerant I/O with high-speed low-voltage option, supports COMP2_OUT and SPI signals. |-| 44 | PE14 | bidirectional | GPIO port E pin 14, 5V tolerant I/O with high-speed low-voltage option, supports timer and SPI signals. |-| 45 | PE15 | bidirectional | GPIO port E pin 15, 5V tolerant I/O with high-speed low-voltage option, supports TIM1_BKIN and LCD/FMC signals. |-| 46 | PB10 | bidirectional | GPIO port B pin 10, 5V tolerant I/O with FM+ option, supports I2C2_SCL, timer, USART3 and QUADSPI signals. |-| 47 | PB11 | bidirectional | GPIO port B pin 11, 5V tolerant I/O with FM+ option, supports I2C2_SDA, timer, USART3 and QUADSPI signals. |-| 48 | VCAP | power_in | Internal voltage regulator stabilization capacitor pin, requires 2.2µF external capacitor with <100mΩ ESR. |-| 49 | VSS | power_in | Ground return path for digital circuits. |-| 50 | VDD | power_in | Main power supply voltage input, 1.62 to 3.6V, requires 100nF decoupling capacitor. |-| 51 | PB12 | bidirectional | GPIO port B pin 12, 5V tolerant USB I/O, supports I2C2_SMBA, SPI2, timer and FDCAN signals. |-| 52 | PB13 | bidirectional | GPIO port B pin 13, 5V tolerant USB I/O, supports SPI2, timer, FDCAN signals and OTG_HS_VBUS. |-| 53 | PB14 | bidirectional | GPIO port B pin 14, 5V tolerant USB I/O, supports USART1, SPI2, timer and SDMMC2 signals. |-| 54 | PB15 | bidirectional | GPIO port B pin 15, 5V tolerant USB I/O, supports USART1, SPI2, timer and SDMMC2 signals. |-| 55 | PD8 | bidirectional | GPIO port D pin 8, 5V tolerant I/O with high-speed low-voltage option, supports USART3, DFSDM and SPDIFRX signals. |-| 56 | PD9 | bidirectional | GPIO port D pin 9, 5V tolerant I/O with high-speed low-voltage option, supports USART3 and DFSDM signals. |-| 57 | PD10 | bidirectional | GPIO port D pin 10, 5V tolerant I/O with high-speed low-voltage option, supports USART3 and SAI signals. |-| 58 | PD11 | bidirectional | GPIO port D pin 11, 5V tolerant I/O with high-speed low-voltage option, supports I2C4_SMBA, USART3 and QUADSPI signals. |-| 59 | PD12 | bidirectional | GPIO port D pin 12, 5V tolerant I/O with FM+ option, supports I2C4_SCL, timer, USART3 and QUADSPI signals. |-| 60 | PD13 | bidirectional | GPIO port D pin 13, 5V tolerant I/O with FM+ option, supports I2C4_SDA and QUADSPI signals. |-| 61 | PD14 | bidirectional | GPIO port D pin 14, 5V tolerant I/O with high-speed low-voltage option, supports timer, SAI and UART8 signals. |-| 62 | PD15 | bidirectional | GPIO port D pin 15, 5V tolerant I/O with high-speed low-voltage option, supports timer, SAI and UART8 signals. |-| 63 | PC6 | bidirectional | GPIO port C pin 6, 5V tolerant I/O with high-speed low-voltage option, supports USART6, timer, SDMMC and LCD signals. |-| 64 | PC7 | bidirectional | GPIO port C pin 7, 5V tolerant I/O with high-speed low-voltage option, supports USART6, timer and SDMMC signals. |-| 65 | PC8 | bidirectional | GPIO port C pin 8, 5V tolerant I/O with high-speed low-voltage option, supports USART6, timer and SDMMC signals. |-| 66 | PC9 | bidirectional | GPIO port C pin 9, 5V tolerant I/O with FM+ option, supports MCO2, timer, I2C3 and SDMMC signals. |-| 67 | PA8 | bidirectional | GPIO port A pin 8, 5V tolerant I/O with FM+ option, supports MCO1, timer, I2C3 and UART signals. |-| 68 | PA9 | bidirectional | GPIO port A pin 9, 5V tolerant USB I/O, supports LPUART1, USART1, SPI2 and OTG_FS_VBUS. |-| 69 | PA10 | bidirectional | GPIO port A pin 10, 5V tolerant USB I/O, supports LPUART1, USART1 and FDCAN signals. |-| 70 | PA11 | bidirectional | GPIO port A pin 11, 5V tolerant USB I/O, supports LPUART1, USART1, UART4 and OTG_FS_DM. |-| 71 | PA12 | bidirectional | GPIO port A pin 12, 5V tolerant USB I/O, supports LPUART1, USART1, UART4 and OTG_FS_DP. |-| 72 | PA13 | bidirectional | GPIO port A pin 13 / JTAG test mode select, 5V tolerant I/O, supports JTMS-SWDIO debug interface. |-| 73 | VCAP | power_in | Internal voltage regulator stabilization capacitor pin, requires 2.2µF external capacitor with <100mΩ ESR. |-| 74 | VSS | power_in | Ground return path for digital circuits. |-| 75 | VDD | power_in | Main power supply voltage input, 1.62 to 3.6V, requires 100nF decoupling capacitor. |-| 76 | PA14 | bidirectional | GPIO port A pin 14 / JTAG test clock, 5V tolerant I/O, supports JTCK-SWCLK debug interface. |-| 77 | PA15 | bidirectional | GPIO port A pin 15 / JTAG data input, 5V tolerant I/O, supports JTDI and multiple peripheral signals. |-| 78 | PC10 | bidirectional | GPIO port C pin 10, 5V tolerant I/O with high-speed low-voltage option, supports USART3, UART4, SPI3 and QUADSPI signals. |-| 79 | PC11 | bidirectional | GPIO port C pin 11, 5V tolerant I/O with high-speed low-voltage option, supports USART3, UART4 and SPI3 signals. |-| 80 | PC12 | bidirectional | GPIO port C pin 12, 5V tolerant I/O with high-speed low-voltage option, supports USART3, UART5 and SPI3 signals. |-| 81 | PD0 | bidirectional | GPIO port D pin 0, 5V tolerant I/O with high-speed low-voltage option, supports UART4 and FDCAN signals. |-| 82 | PD1 | bidirectional | GPIO port D pin 1, 5V tolerant I/O with high-speed low-voltage option, supports UART4 and FDCAN signals. |-| 83 | PD2 | bidirectional | GPIO port D pin 2, 5V tolerant I/O with high-speed low-voltage option, supports UART5, SDMMC1 and DCMI signals. |-| 84 | PD3 | bidirectional | GPIO port D pin 3, 5V tolerant I/O with high-speed low-voltage option, supports USART2 and SPI2 signals. |-| 85 | PD4 | bidirectional | GPIO port D pin 4, 5V tolerant I/O with high-speed low-voltage option, supports USART2 and FDCAN signals. |-| 86 | PD5 | bidirectional | GPIO port D pin 5, 5V tolerant I/O with high-speed low-voltage option, supports USART2 and FDCAN signals. |-| 87 | PD6 | bidirectional | GPIO port D pin 6, 5V tolerant I/O with high-speed low-voltage option, supports USART2, SAI, SPI3 and SDMMC signals. |-| 88 | PD7 | bidirectional | GPIO port D pin 7, 5V tolerant I/O with high-speed low-voltage option, supports USART2, SPI1 and SDMMC signals. |-| 89 | PB3 | bidirectional | GPIO port B pin 3 / JTAG data output, 5V tolerant I/O, supports JTDO/TRACESWO debug interface and SPI/timer signals. |-| 90 | PB4 | bidirectional | GPIO port B pin 4 / JTAG test reset, 5V tolerant I/O, supports NJTRST debug and SPI/timer signals. |-| 91 | PB5 | bidirectional | GPIO port B pin 5, 5V tolerant I/O, supports I2C1_SMBA, SPI1 and FDCAN signals. |-| 92 | PB6 | bidirectional | GPIO port B pin 6, 5V tolerant I/O with FM+ option, supports I2C1_SCL, USART1 and FDCAN signals. |-| 93 | PB7 | bidirectional | GPIO port B pin 7, 5V tolerant I/O with FM+ option, supports I2C1_SDA, USART1 and FDCAN signals. |-| 94 | BOOT0 | input | Boot mode selection input pin, accepts 0 to 9V input, determines boot source at reset (flash or system memory). |-| 95 | PB8 | bidirectional | GPIO port B pin 8, 5V tolerant I/O with FM+ option, supports I2C1_SCL, timer, UART4 and FDCAN signals. |-| 96 | PB9 | bidirectional | GPIO port B pin 9, 5V tolerant I/O with FM+ option, supports I2C1_SDA, timer, UART4 and FDCAN signals. |-| 97 | PE0 | bidirectional | GPIO port E pin 0, 5V tolerant I/O with high-speed low-voltage option, supports LPTIM1/2, UART8 and FDCAN signals. |-| 98 | PE1 | bidirectional | GPIO port E pin 1, 5V tolerant I/O with high-speed low-voltage option, supports LPTIM1 and UART8 signals. |-| 99 | VSS | power_in | Ground return path for digital circuits. |-| 100 | VDD | power_in | Main power supply voltage input, 1.62 to 3.6V, requires 100nF decoupling capacitor. |+| 1 | PE2 | bidirectional | 5 V-tolerant high-speed I/O (FT_h); alternate functions include TRACECLK, SAI1_CK1, SPI4_SCK, QUADSPI_BK1_IO2 and FMC_A23. |+| 2 | PE3 | bidirectional | 5 V-tolerant high-speed I/O (FT_h); alternate functions include TRACED0, TIM15_BKIN, SAI1_SD_B and FMC_A19. |+| 3 | PE4 | bidirectional | 5 V-tolerant high-speed I/O (FT_h); alternate functions include TRACED1, SAI1_D2, SPI4_NSS, DCMI_D4 and LCD_B0. |+| 4 | PE5 | bidirectional | 5 V-tolerant high-speed I/O (FT_h); alternate functions include TRACED2, SAI1_CK2, TIM15_CH1, SPI4_MISO, DCMI_D6 and LCD_G0. |+| 5 | PE6 | bidirectional | 5 V-tolerant high-speed I/O (FT_h); alternate functions include TRACED3, TIM1_BKIN2, SAI1_D1, SPI4_MOSI, DCMI_D7 and LCD_G1. |+| 6 | VBAT | power_in | Backup/battery supply for the VBAT domain (RTC/LSE, backup registers), with battery charging capability; external supply must stay within the 4.0 V absolute maximum. |+| 7 | PC13 | bidirectional | 5 V-tolerant I/O (FT); additional functions RTC_TAMP1, RTC_TS and WKUP2; EVENTOUT alternate function. |+| 8 | PC14-OSC32_IN | bidirectional | 5 V-tolerant I/O (FT); can be used as the LSE 32.768 kHz oscillator input OSC32_IN. |+| 9 | PC15-OSC32_OUT | bidirectional | 5 V-tolerant I/O (FT); can be used as the LSE 32.768 kHz oscillator output OSC32_OUT. |+| 10 | VSS | power_in | Ground pin; all VSS pins must be connected to the external ground. |+| 11 | VDD | power_in | Standard operating supply for I/Os and digital logic, 1.62 V to 3.6 V. |+| 12 | PH0-OSC_IN | bidirectional | 5 V-tolerant I/O (FT); HSE oscillator input OSC_IN for the 4-48 MHz external oscillator. |+| 13 | PH1-OSC_OUT | bidirectional | 5 V-tolerant I/O (FT); HSE oscillator output OSC_OUT for the 4-48 MHz external oscillator. |+| 14 | NRST | bidirectional | Bidirectional reset pin with embedded weak pull-up resistor. |+| 15 | PC0 | bidirectional | 5 V-tolerant I/O with analog option supplied by VDDA (FT_a); ADC123_INP10 additional function; alternate functions include DFSDM1_CKIN0, SAI2_FS_B, OTG_HS_ULPI_STP and FMC_SDNWE. |+| 16 | PC1 | bidirectional | 5 V-tolerant I/O (FT_ha); ADC123_INP11/ADC123_INN10 and RTC_TAMP3/WKUP5 additional functions; alternate functions include TRACED0, SAI1_D1, SPI2_MOSI/I2S2_SDO and ETH_MDC. |+| 17 | PC2_C | passive | Analog pad (Pxy_C) connected to PC2 through an analog switch configured in SYSCFG; 3.3 V-tolerant TT_a I/O supplied by VDDA; ADC3_INN1 and ADC3_INP0 additional functions. |+| 18 | PC3_C | passive | Analog pad (Pxy_C) connected to PC3 through an analog switch configured in SYSCFG; 3.3 V-tolerant TT_a I/O supplied by VDDA; ADC3_INP1 additional function. |+| 19 | VSSA | power_in | Ground for the analog domain (ADC, DAC, OPAMP, COMP and reference). |+| 20 | VREF+ | power_in | Positive reference voltage input for the ADC/DAC analog peripherals; available on this package. |+| 21 | VDDA | power_in | Analog supply: 1.62 V to 3.6 V when ADC or COMP is used (1.8 V minimum for DAC, 2.0 V for OPAMP, 1.8 V for VREFBUF). |+| 22 | PA0 | bidirectional | 5 V-tolerant I/O with analog option (FT_a); ADC1_INP16 and WKUP0 additional functions; alternate functions include TIM2_CH1/TIM2_ETR, USART2_CTS, UART4_TX and ETH_MII_CRS. |+| 23 | PA1 | bidirectional | 5 V-tolerant I/O (FT_ha); ADC1_INN16/ADC1_INP17 additional functions; alternate functions include TIM2_CH2, USART2_RTS, UART4_RX and ETH_MII_RX_CLK. |+| 24 | PA2 | bidirectional | 5 V-tolerant I/O with analog option (FT_a); ADC12_INP14 and WKUP1 additional functions; alternate functions include TIM2_CH3, USART2_TX and ETH_MDIO. |+| 25 | PA3 | bidirectional | 5 V-tolerant I/O (FT_ha); ADC12_INP15 additional function; alternate functions include TIM2_CH4, USART2_RX, OTG_HS_ULPI_D0 and ETH_MII_COL. |+| 26 | VSS | power_in | Ground pin; all VSS pins must be connected to the external ground. |+| 27 | VDD | power_in | Standard operating supply for I/Os and digital logic, 1.62 V to 3.6 V. |+| 28 | PA4 | bidirectional | 3.3 V-tolerant I/O with analog option (TT_a); ADC12_INP18 and DAC1_OUT1 additional functions; alternate functions include D1PWREN, SPI1_NSS/I2S1_WS, USART2_CK and DCMI_HSYNC. |+| 29 | PA5 | bidirectional | 3.3 V-tolerant I/O (TT_ha); ADC12_INN18/ADC12_INP19 and DAC1_OUT2 additional functions; alternate functions include D2PWREN, TIM2_CH1/TIM2_ETR, SPI1_SCK/I2S1_CK and OTG_HS_ULPI_CK. |+| 30 | PA6 | bidirectional | 5 V-tolerant I/O with analog option (FT_a); ADC12_INP3 additional function; alternate functions include TIM1_BKIN, TIM3_CH1, SPI1_MISO/I2S1_SDI and DCMI_PIXCLK. |+| 31 | PA7 | bidirectional | 3.3 V-tolerant I/O with analog option (TT_a); ADC12_INN3, ADC12_INP7 and OPAMP1_VINM additional functions; alternate functions include TIM1_CH1N, TIM3_CH2, SPI1_MOSI/I2S1_SDO and FMC_SDNWE. |+| 32 | PC4 | bidirectional | 3.3 V-tolerant I/O with analog option (TT_a); ADC12_INP4, OPAMP1_VOUT and COMP1_INM additional functions; alternate functions include DFSDM1_CKIN2, I2S1_MCK and ETH_MII_RXD0. |+| 33 | PC5 | bidirectional | 3.3 V-tolerant I/O with analog option (TT_a); ADC12_INN4, ADC12_INP8 and OPAMP1_VINM additional functions; alternate functions include SAI1_D3, DFSDM1_DATIN2, ETH_MII_RXD1 and COMP1_OUT. |+| 34 | PB0 | bidirectional | 5 V-tolerant I/O with analog option (FT_a); ADC12_INN5, ADC12_INP9, OPAMP1_VINP and COMP1_INP additional functions; alternate functions include TIM1_CH2N, TIM3_CH3, OTG_HS_ULPI_D1 and ETH_MII_RXD2. |+| 35 | PB1 | bidirectional | 3.3 V-tolerant I/O with USB option (TT_u, supplied by VDD33USB); ADC12_INP5 and COMP1_INM additional functions; alternate functions include TIM1_CH3N, TIM3_CH4, OTG_HS_ULPI_D2 and ETH_MII_RXD3. |+| 36 | PB2 | bidirectional | 5 V-tolerant high-speed I/O with analog option (FT_ha); COMP1_INP additional function; alternate functions include RTC_OUT, SAI1_D1, DFSDM1_CKIN1 and QUADSPI_CLK. |+| 37 | PE7 | bidirectional | 3.3 V-tolerant high-speed I/O (TT_ha); OPAMP2_VOUT and COMP2_INM additional functions; alternate functions include TIM1_ETR, DFSDM1_DATIN2, UART7_RX, QUADSPI_BK2_IO0 and FMC_D4. |+| 38 | PE8 | bidirectional | 3.3 V-tolerant high-speed I/O (TT_ha); OPAMP2_VINM additional function; alternate functions include TIM1_CH1N, DFSDM1_CKIN2, UART7_TX, QUADSPI_BK2_IO1, FMC_D5 and COMP2_OUT. |+| 39 | PE9 | bidirectional | 3.3 V-tolerant high-speed I/O (TT_ha); OPAMP2_VINP and COMP2_INP additional functions; alternate functions include TIM1_CH1, DFSDM1_CKOUT, UART7_RTS/UART7_DE, QUADSPI_BK2_IO2 and FMC_D6. |+| 40 | PE10 | bidirectional | 5 V-tolerant high-speed I/O (FT_ha); COMP2_INM additional function; alternate functions include TIM1_CH2N, DFSDM1_DATIN4, UART7_CTS, QUADSPI_BK2_IO3 and FMC_D7. |+| 41 | PE11 | bidirectional | 5 V-tolerant high-speed I/O (FT_ha); COMP2_INP additional function; alternate functions include TIM1_CH2, DFSDM1_CKIN4, SPI4_NSS, SAI2_SD_B, FMC_D8 and LCD_G3. |+| 42 | PE12 | bidirectional | 5 V-tolerant high-speed I/O (FT_h); alternate functions include TIM1_CH3N, DFSDM1_DATIN5, SPI4_SCK, SAI2_SCK_B, FMC_D9, COMP1_OUT and LCD_B4. |+| 43 | PE13 | bidirectional | 5 V-tolerant high-speed I/O (FT_h); alternate functions include TIM1_CH3, DFSDM1_CKIN5, SPI4_MISO, SAI2_FS_B, FMC_D10, COMP2_OUT and LCD_DE. |+| 44 | PE14 | bidirectional | 5 V-tolerant high-speed I/O (FT_h); alternate functions include TIM1_CH4, SPI4_MOSI, SAI2_MCLK_B, FMC_D11 and LCD_CLK. |+| 45 | PE15 | bidirectional | 5 V-tolerant high-speed I/O (FT_h); alternate functions include TIM1_BKIN, FMC_D12, TIM1_BKIN_COMP12 and LCD_R7. |+| 46 | PB10 | bidirectional | 5 V-tolerant I/O with FM+ option (FT_f); alternate functions include TIM2_CH3, HRTIM_SCOUT, I2C2_SCL, SPI2_SCK/I2S2_CK, USART3_TX, OTG_HS_ULPI_D3 and ETH_MII_RX_ER. |+| 47 | PB11 | bidirectional | 5 V-tolerant I/O with FM+ option (FT_f); alternate functions include TIM2_CH4, HRTIM_SCIN, LPTIM2_ETR, I2C2_SDA, USART3_RX, OTG_HS_ULPI_D4 and ETH_MII_TX_EN. |+| 48 | VCAP | power_out | Output of the main regulator; connect a 2.2 µF external capacitor (±20%, ESR < 100 mΩ) to this pin, as specified in Table 25. |+| 49 | VSS | power_in | Ground pin; all VSS pins must be connected to the external ground. |+| 50 | VDD | power_in | Standard operating supply for I/Os and digital logic, 1.62 V to 3.6 V. |+| 51 | PB12 | bidirectional | 5 V-tolerant I/O with USB option (FT_u, supplied by VDD33USB); alternate functions include TIM1_BKIN, I2C2_SMBA, SPI2_NSS/I2S2_WS, USART3_CK, FDCAN2_RX, OTG_HS_ULPI_D5 and OTG_HS_ID. |+| 52 | PB13 | bidirectional | 5 V-tolerant I/O with USB option (FT_u); OTG_HS_VBUS additional function; alternate functions include TIM1_CH1N, LPTIM2_OUT, SPI2_SCK/I2S2_CK, USART3_CTS, FDCAN2_TX and OTG_HS_ULPI_D6. |+| 53 | PB14 | bidirectional | 5 V-tolerant I/O with USB option (FT_u); alternate functions include TIM1_CH2N, TIM12_CH1, USART1_TX, SPI2_MISO/I2S2_SDI, USART3_RTS, UART4_RTS, SDMMC2_D0 and OTG_HS_DM. |+| 54 | PB15 | bidirectional | 5 V-tolerant I/O with USB option (FT_u); alternate functions include RTC_REFIN, TIM1_CH3N, TIM12_CH2, USART1_RX, SPI2_MOSI/I2S2_SDO, UART4_CTS, SDMMC2_D1 and OTG_HS_DP. |+| 55 | PD8 | bidirectional | 5 V-tolerant high-speed I/O (FT_h); alternate functions include DFSDM1_CKIN3, SAI3_SCK_B, USART3_TX, SPDIFRX1_IN2 and FMC_D13. |+| 56 | PD9 | bidirectional | 5 V-tolerant high-speed I/O (FT_h); alternate functions include DFSDM1_DATIN3, SAI3_SD_B, USART3_RX, FDCAN2_RXFD_MODE and FMC_D14. |+| 57 | PD10 | bidirectional | 5 V-tolerant high-speed I/O (FT_h); alternate functions include DFSDM1_CKOUT, SAI3_FS_B, USART3_CK, FDCAN2_TXFD_MODE, FMC_D15 and LCD_B3. |+| 58 | PD11 | bidirectional | 5 V-tolerant high-speed I/O (FT_h); alternate functions include LPTIM2_IN2, I2C4_SMBA, USART3_CTS, QUADSPI_BK1_IO0, SAI2_SD_A and FMC_A16. |+| 59 | PD12 | bidirectional | 5 V-tolerant high-speed I/O with FM+ option (FT_fh); alternate functions include LPTIM1_IN1, TIM4_CH1, I2C4_SCL, USART3_RTS, QUADSPI_BK1_IO1 and FMC_A17. |+| 60 | PD13 | bidirectional | 5 V-tolerant high-speed I/O with FM+ option (FT_fh); alternate functions include LPTIM1_OUT, TIM4_CH2, I2C4_SDA, QUADSPI_BK1_IO3 and FMC_A18. |+| 61 | PD14 | bidirectional | 5 V-tolerant high-speed I/O (FT_h); alternate functions include TIM4_CH3, SAI3_MCLK_B, UART8_CTS and FMC_D0. |+| 62 | PD15 | bidirectional | 5 V-tolerant high-speed I/O (FT_h); alternate functions include TIM4_CH4, SAI3_MCLK_A, UART8_RTS/UART8_DE and FMC_D1. |+| 63 | PC6 | bidirectional | 5 V-tolerant high-speed I/O (FT_h); alternate functions include HRTIM_CHA1, TIM3_CH1, TIM8_CH1, I2S2_MCK, USART6_TX, FMC_NWAIT and DCMI_D0; SWPMI_IO additional function. |+| 64 | PC7 | bidirectional | 5 V-tolerant high-speed I/O (FT_h); alternate functions include TRGIO, HRTIM_CHA2, TIM3_CH2, TIM8_CH2, I2S3_MCK, USART6_RX, FMC_NE1 and DCMI_D1. |+| 65 | PC8 | bidirectional | 5 V-tolerant high-speed I/O (FT_h); alternate functions include TRACED1, HRTIM_CHB1, TIM3_CH3, TIM8_CH3, USART6_CK, FMC_NE2/FMC_NCE, SWPMI_RX and DCMI_D2. |+| 66 | PC9 | bidirectional | 5 V-tolerant I/O with FM+ option (FT_fh); alternate functions include MCO2, TIM3_CH4, TIM8_CH4, I2C3_SDA, UART5_CTS, QUADSPI_BK1_IO0 and SDMMC1_D1. |+| 67 | PA8 | bidirectional | 5 V-tolerant I/O with FM+ option and analog option (FT_fha); alternate functions include MCO1, TIM1_CH1, HRTIM_CHB2, I2C3_SCL, USART1_CK, OTG_FS_SOF and UART7_RX. |+| 68 | PA9 | bidirectional | 5 V-tolerant I/O with USB option (FT_u); OTG_FS_VBUS additional function; alternate functions include TIM1_CH2, HRTIM_CHC1, LPUART1_TX, I2C3_SMBA, SPI2_SCK/I2S2_CK, USART1_TX and DCMI_D0. |+| 69 | PA10 | bidirectional | 5 V-tolerant I/O with USB option (FT_u); alternate functions include TIM1_CH3, HRTIM_CHC2, LPUART1_RX, USART1_RX, OTG_FS_ID, MDIOS_MDIO and DCMI_D1. |+| 70 | PA11 | bidirectional | 5 V-tolerant I/O with USB option (FT_u); alternate functions include TIM1_CH4, HRTIM_CHD1, LPUART1_CTS, SPI2_NSS/I2S2_WS, UART4_RX, USART1_CTS, FDCAN1_RX and OTG_FS_DM. |+| 71 | PA12 | bidirectional | 5 V-tolerant I/O with USB option (FT_u); alternate functions include TIM1_ETR, HRTIM_CHD2, LPUART1_RTS/LPUART1_DE, SPI2_SCK/I2S2_CK, UART4_TX, USART1_RTS/USART1_DE, FDCAN1_TX and OTG_FS_DP. |+| 72 | PA13 | bidirectional | 5 V-tolerant I/O (FT); default function JTMS-SWDIO (SWD debug data). |+| 73 | VCAP | power_out | Output of the main regulator; connect a 2.2 µF external capacitor (±20%, ESR < 100 mΩ) to this pin, as specified in Table 25. |+| 74 | VSS | power_in | Ground pin; all VSS pins must be connected to the external ground. |+| 75 | VDD | power_in | Standard operating supply for I/Os and digital logic, 1.62 V to 3.6 V. |+| 76 | PA14 | bidirectional | 5 V-tolerant I/O (FT); default function JTCK-SWCLK (SWD clock). |+| 77 | PA15 | bidirectional | 5 V-tolerant I/O (FT); default function JTDI; alternate functions include TIM2_CH1/TIM2_ETR, HRTIM_FLT1, CEC, SPI1_NSS/I2S1_WS and UART4_RTS. |+| 78 | PC10 | bidirectional | 5 V-tolerant high-speed I/O (FT_ha); alternate functions include HRTIM_EEV1, DFSDM1_CKIN5, SPI3_SCK/I2S3_CK, USART3_TX, UART4_TX, QUADSPI_BK1_IO1, SDMMC1_D2 and DCMI_D8. |+| 79 | PC11 | bidirectional | 5 V-tolerant high-speed I/O (FT_h); alternate functions include HRTIM_FLT2, DFSDM1_DATIN5, SPI3_MISO/I2S3_SDI, USART3_RX, UART4_RX, QUADSPI_BK2_NCS, SDMMC1_D3 and DCMI_D4. |+| 80 | PC12 | bidirectional | 5 V-tolerant high-speed I/O (FT_h); alternate functions include TRACED3, HRTIM_EEV2, SPI3_MOSI/I2S3_SDO, USART3_CK, UART5_TX, SDMMC1_CK and DCMI_D9. |+| 81 | PD0 | bidirectional | 5 V-tolerant high-speed I/O (FT_h); alternate functions include DFSDM1_CKIN6, SAI3_SCK_A, UART4_RX, FDCAN1_RX and FMC_D2. |+| 82 | PD1 | bidirectional | 5 V-tolerant high-speed I/O (FT_h); alternate functions include DFSDM1_DATIN6, SAI3_SD_A, UART4_TX, FDCAN1_TX and FMC_D3. |+| 83 | PD2 | bidirectional | 5 V-tolerant high-speed I/O (FT_h); alternate functions include TRACED2, TIM3_ETR, UART5_RX, SDMMC1_CMD and DCMI_D11. |+| 84 | PD3 | bidirectional | 5 V-tolerant high-speed I/O (FT_h); alternate functions include DFSDM1_CKOUT, SPI2_SCK/I2S2_CK, USART2_CTS/USART2_NSS, FMC_CLK, DCMI_D5 and LCD_G7. |+| 85 | PD4 | bidirectional | 5 V-tolerant high-speed I/O (FT_h); alternate functions include HRTIM_FLT3, SAI3_FS_A, USART2_RTS/USART2_DE, FDCAN1_RXFD_MODE and FMC_NOE. |+| 86 | PD5 | bidirectional | 5 V-tolerant high-speed I/O (FT_h); alternate functions include HRTIM_EEV3, USART2_TX, FDCAN1_TXFD_MODE and FMC_NWE. |+| 87 | PD6 | bidirectional | 5 V-tolerant high-speed I/O (FT_h); alternate functions include SAI1_D1, DFSDM1_DATIN1, SPI3_MOSI/I2S3_SDO, USART2_RX, FDCAN2_RXFD_MODE, SDMMC2_CK, FMC_NWAIT, DCMI_D10 and LCD_B2. |+| 88 | PD7 | bidirectional | 5 V-tolerant high-speed I/O (FT_h); alternate functions include DFSDM1_DATIN4, SPI1_MOSI/I2S1_SDO, USART2_CK, SPDIFRX1_IN1, SDMMC2_CMD and FMC_NE1. |+| 89 | PB3 | bidirectional | 5 V-tolerant I/O (FT); default function JTDO/TRACESWO; alternate functions include TIM2_CH2, HRTIM_FLT4, SPI1_SCK/I2S1_CK, SPI3_SCK/I2S3_CK, SDMMC2_D2 and UART7_RX. |+| 90 | PB4 | bidirectional | 5 V-tolerant I/O (FT); default function NJTRST; alternate functions include TIM16_BKIN, TIM3_CH1, HRTIM_EEV6, SPI1_MISO/I2S1_SDI, SPI3_MISO/I2S3_SDI, SDMMC2_D3 and UART7_TX. |+| 91 | PB5 | bidirectional | 5 V-tolerant I/O (FT); alternate functions include TIM17_BKIN, TIM3_CH2, HRTIM_EEV7, I2C1_SMBA, SPI1_MOSI/I2S1_SDO, FDCAN2_RX, OTG_HS_ULPI_D7, FMC_SDCKE1 and DCMI_D10. |+| 92 | PB6 | bidirectional | 5 V-tolerant I/O with FM+ option (FT_f); alternate functions include TIM16_CH1N, TIM4_CH1, I2C1_SCL, CEC, USART1_TX, LPUART1_TX, FDCAN2_TX, QUADSPI_BK1_NCS and FMC_SDNE1. |+| 93 | PB7 | bidirectional | 5 V-tolerant I/O with FM+ and analog option (FT_fa); PVD_IN additional function; alternate functions include TIM17_CH1N, TIM4_CH2, I2C1_SDA, USART1_RX, LPUART1_RX, FDCAN2_TXFD_MODE and FMC_NL. |+| 94 | BOOT0 | input | Dedicated BOOT0 boot-mode input; input voltage limited to 9.0 V (VPP additional function). |+| 95 | PB8 | bidirectional | 5 V-tolerant high-speed I/O with FM+ option (FT_fh); alternate functions include TIM16_CH1, TIM4_CH3, DFSDM1_CKIN7, I2C1_SCL, SDMMC1_CKIN, FDCAN1_RX, ETH_MII_TXD3 and DCMI_D6. |+| 96 | PB9 | bidirectional | 5 V-tolerant high-speed I/O with FM+ option (FT_fh); alternate functions include TIM17_CH1, TIM4_CH4, DFSDM1_DATIN7, I2C1_SDA, SPI2_NSS/I2S2_WS, SDMMC1_CDIR, FDCAN1_TX and DCMI_D7. |+| 97 | PE0 | bidirectional | 5 V-tolerant high-speed I/O (FT_h); alternate functions include LPTIM1_ETR, TIM4_ETR, HRTIM_SCIN, UART8_RX, FDCAN1_RXFD_MODE, SAI2_MCLK_A, FMC_NBL0 and DCMI_D2. |+| 98 | PE1 | bidirectional | 5 V-tolerant high-speed I/O (FT_h); alternate functions include LPTIM1_IN2, HRTIM_SCOUT, UART8_TX, FDCAN1_TXFD_MODE, FMC_NBL1 and DCMI_D3. |+| 99 | VSS | power_in | Ground pin; all VSS pins must be connected to the external ground. |+| 100 | VDD | power_in | Standard operating supply for I/Os and digital logic, 1.62 V to 3.6 V. |  ## Key specifications @@ -118,6 +118,15 @@ STM32H743VIT6 from STMicroelectronics, in a LQFP-100(14x14). Pinout and pin desc | Category | Embedded Processors & Controllers | | Pins | 100 | +## Electrical characteristics++Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).++| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |+|---|---|---|---|---|---|---|---|+| Ambient temperatures |  | -40 |  | 85 | °C |  | 21 |+| Junction temperature |  | -40 |  | 125 | °C |  | 21 |+ ## CAD (KiCad official)  - Symbol: `STM32H743VIT6`@@ -129,8 +138,8 @@ STM32H743VIT6 from STMicroelectronics, in a LQFP-100(14x14). Pinout and pin desc  Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588893876479909888) (357 pp, sha256 `9c74d2015445f7c3`, retrieved 2026-09-23, tier: lcsc)-- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588893876479909888) (357 pp, sha256 `9c74d2015445f7c3`, retrieved 2026-11-10, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** KiCad official libraries (CC-BY-SA 4.0).  [Datasheet PDF](docs/stm32h743vit6-datasheet.pdf)
docs/hero.png
⋯ 1 unchanged line ⋯
package.json+221−117
@@ -1,8 +1,8 @@ {   "slug": "stm32h743vit6",-  "version": "0.1.0",+  "version": "0.1.1",   "type": "component",-  "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-100(14x14). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-100(14x14). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.",   "tags": [     "component",     "embedded processors & controllers",@@ -26,7 +26,10 @@     "docs/hero.png",     "docs/stm32h743vit6-datasheet.pdf",     "viewers/symbol.html",-    "viewers/footprint.html"+    "viewers/footprint.html",+    "stm32h743vit6-hero.glb",+    "stm32h743vit6-hero.overlay.json",+    "stm32h743vit6-etched.glb"   ],   "component": {     "mpn": "STM32H743VIT6",@@ -39,8 +42,8 @@     "parts": {       "symbol": "stm32h743vit6.kicad_sym",       "footprint": "stm32h743vit6.kicad_mod",-      "model_3d": "stm32h743vit6-etched.glb",-      "model_3d_plain": "stm32h743vit6.glb",+      "model_3d": "stm32h743vit6-hero.glb",+      "model_3d_plain": "stm32h743vit6-etched.glb",       "model_3d_step": "stm32h743vit6-etched.step",       "model_3d_step_plain": "stm32h743vit6.step",       "lbr": "stm32h743vit6.lbr"@@ -48,624 +51,637 @@     "distributor_links": {       "lcsc": "C114409"     },+    "distributor_check": {+      "checked_at": "2026-11-10T22:52:57Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": null,+        "status": "deferred",+        "error": "shared DigiKey quota guard: 0 calls left today"+      },+      "mouser": {+        "pn": null,+        "status": "quota"+      }+    },     "pins": [       {         "number": "1",         "name": "PE2",         "type": "bidirectional",-        "description": "GPIO port E pin 2, 5V tolerant I/O with high-speed low-voltage option, supports TRACECLK, SAI1_CK1, SPI4_SCK and multiple alternate functions including FMC address and LCD controller signals."+        "description": "5 V-tolerant high-speed I/O (FT_h); alternate functions include TRACECLK, SAI1_CK1, SPI4_SCK, QUADSPI_BK1_IO2 and FMC_A23."       },       {         "number": "2",         "name": "PE3",         "type": "bidirectional",-        "description": "GPIO port E pin 3, 5V tolerant I/O with high-speed low-voltage option, supports TRACED0, TIM15_BKIN, SAI1_SD_B and FMC address signals."+        "description": "5 V-tolerant high-speed I/O (FT_h); alternate functions include TRACED0, TIM15_BKIN, SAI1_SD_B and FMC_A19."       },       {         "number": "3",         "name": "PE4",         "type": "bidirectional",-        "description": "GPIO port E pin 4, 5V tolerant I/O with high-speed low-voltage option, supports TRACED1, SAI1_D2, SPI4_NSS and DCMI/LCD control signals."+        "description": "5 V-tolerant high-speed I/O (FT_h); alternate functions include TRACED1, SAI1_D2, SPI4_NSS, DCMI_D4 and LCD_B0."       },       {         "number": "4",         "name": "PE5",         "type": "bidirectional",-        "description": "GPIO port E pin 5, 5V tolerant I/O with high-speed low-voltage option, supports TRACED2, SAI1_CK2, SPI4_MISO and DCMI/LCD signals."+        "description": "5 V-tolerant high-speed I/O (FT_h); alternate functions include TRACED2, SAI1_CK2, TIM15_CH1, SPI4_MISO, DCMI_D6 and LCD_G0."       },       {         "number": "5",         "name": "PE6",         "type": "bidirectional",-        "description": "GPIO port E pin 6, 5V tolerant I/O with high-speed low-voltage option, supports TRACED3, TIM1_BKIN2, SAI1_D1 and FMC/LCD signals."+        "description": "5 V-tolerant high-speed I/O (FT_h); alternate functions include TRACED3, TIM1_BKIN2, SAI1_D1, SPI4_MOSI, DCMI_D7 and LCD_G1."       },       {         "number": "6",         "name": "VBAT",         "type": "power_in",-        "description": "Battery backup supply voltage input, 1.2 to 3.6V for backup domain power supply."+        "description": "Backup/battery supply for the VBAT domain (RTC/LSE, backup registers), with battery charging capability; external supply must stay within the 4.0 V absolute maximum."       },       {         "number": "7",         "name": "PC13",         "type": "bidirectional",-        "description": "GPIO port C pin 13, 5V tolerant I/O, supports RTC_TAMP1/WKUP2 and external interrupt capability."+        "description": "5 V-tolerant I/O (FT); additional functions RTC_TAMP1, RTC_TS and WKUP2; EVENTOUT alternate function."       },       {         "number": "8",         "name": "PC14-OSC32_IN",         "type": "bidirectional",-        "description": "GPIO port C pin 14 / 32.768 kHz oscillator input, 5V tolerant I/O, functions as external oscillator input when configured."+        "description": "5 V-tolerant I/O (FT); can be used as the LSE 32.768 kHz oscillator input OSC32_IN."       },       {         "number": "9",         "name": "PC15-OSC32_OUT",         "type": "bidirectional",-        "description": "GPIO port C pin 15 / 32.768 kHz oscillator output, 5V tolerant I/O, functions as external oscillator output when configured."+        "description": "5 V-tolerant I/O (FT); can be used as the LSE 32.768 kHz oscillator output OSC32_OUT."       },       {         "number": "10",         "name": "VSS",         "type": "power_in",-        "description": "Ground return path for digital circuits."+        "description": "Ground pin; all VSS pins must be connected to the external ground."       },       {         "number": "11",         "name": "VDD",         "type": "power_in",-        "description": "Main power supply voltage input, 1.62 to 3.6V, requires 100nF decoupling capacitor."+        "description": "Standard operating supply for I/Os and digital logic, 1.62 V to 3.6 V."       },       {         "number": "12",         "name": "PH0-OSC_IN",         "type": "bidirectional",-        "description": "GPIO port H pin 0 / main oscillator input, 5V tolerant I/O, supports external oscillator (4-48 MHz HSE)."+        "description": "5 V-tolerant I/O (FT); HSE oscillator input OSC_IN for the 4-48 MHz external oscillator."       },       {         "number": "13",         "name": "PH1-OSC_OUT",         "type": "bidirectional",-        "description": "GPIO port H pin 1 / main oscillator output, 5V tolerant I/O, supports external oscillator output."+        "description": "5 V-tolerant I/O (FT); HSE oscillator output OSC_OUT for the 4-48 MHz external oscillator."       },       {         "number": "14",         "name": "NRST",         "type": "bidirectional",-        "description": "Reset input pin with embedded weak pull-up resistor and Schmitt trigger, active low reset, 5V tolerant."+        "description": "Bidirectional reset pin with embedded weak pull-up resistor."       },       {         "number": "15",         "name": "PC0",         "type": "bidirectional",-        "description": "GPIO port C pin 0, 5V tolerant analog/digital I/O, supports ADC123_INP10, DFSDM1_CKIN0 and FMC/LCD signals."+        "description": "5 V-tolerant I/O with analog option supplied by VDDA (FT_a); ADC123_INP10 additional function; alternate functions include DFSDM1_CKIN0, SAI2_FS_B, OTG_HS_ULPI_STP and FMC_SDNWE."       },       {         "number": "16",         "name": "PC1",         "type": "bidirectional",-        "description": "GPIO port C pin 1, 5V tolerant I/O with high-speed low-voltage option, supports ADC123 inputs, DFSDM signals and SDMMC/ETH peripherals."+        "description": "5 V-tolerant I/O (FT_ha); ADC123_INP11/ADC123_INN10 and RTC_TAMP3/WKUP5 additional functions; alternate functions include TRACED0, SAI1_D1, SPI2_MOSI/I2S2_SDO and ETH_MDC."       },       {         "number": "17",         "name": "PC2_C",-        "type": "bidirectional",-        "description": "Analog-only GPIO port C pin 2, 3.3V tolerant, provides access to ADC3_INN1 and ADC3_INP0 when analog switch is open."+        "type": "passive",+        "description": "Analog pad (Pxy_C) connected to PC2 through an analog switch configured in SYSCFG; 3.3 V-tolerant TT_a I/O supplied by VDDA; ADC3_INN1 and ADC3_INP0 additional functions."       },       {         "number": "18",         "name": "PC3_C",-        "type": "bidirectional",-        "description": "Analog-only GPIO port C pin 3, 3.3V tolerant, provides access to ADC3_INP1 when analog switch is open."+        "type": "passive",+        "description": "Analog pad (Pxy_C) connected to PC3 through an analog switch configured in SYSCFG; 3.3 V-tolerant TT_a I/O supplied by VDDA; ADC3_INP1 additional function."       },       {         "number": "19",         "name": "VSSA",         "type": "power_in",-        "description": "Analog ground return path, must be connected to VSS externally."+        "description": "Ground for the analog domain (ADC, DAC, OPAMP, COMP and reference)."       },       {         "number": "20",         "name": "VREF+",         "type": "power_in",-        "description": "Positive reference voltage for ADC, 1.62 to 3.6V, requires 100nF + 1\u00b5F decoupling capacitors."+        "description": "Positive reference voltage input for the ADC/DAC analog peripherals; available on this package."       },       {         "number": "21",         "name": "VDDA",         "type": "power_in",-        "description": "Analog power supply voltage, 1.62 to 3.6V for ADC/DAC/OPAMP/COMP operation, requires 100nF + 1\u00b5F capacitors."+        "description": "Analog supply: 1.62 V to 3.6 V when ADC or COMP is used (1.8 V minimum for DAC, 2.0 V for OPAMP, 1.8 V for VREFBUF)."       },       {         "number": "22",         "name": "PA0",         "type": "bidirectional",-        "description": "GPIO port A pin 0, 5V tolerant analog I/O, supports ADC1_INP16, WKUP0, timer and UART signals, DAC1_OUT1."+        "description": "5 V-tolerant I/O with analog option (FT_a); ADC1_INP16 and WKUP0 additional functions; alternate functions include TIM2_CH1/TIM2_ETR, USART2_CTS, UART4_TX and ETH_MII_CRS."       },       {         "number": "23",         "name": "PA1",         "type": "bidirectional",-        "description": "GPIO port A pin 1, 5V tolerant I/O with high-speed low-voltage option, supports ADC1 inputs, timer and UART signals."+        "description": "5 V-tolerant I/O (FT_ha); ADC1_INN16/ADC1_INP17 additional functions; alternate functions include TIM2_CH2, USART2_RTS, UART4_RX and ETH_MII_RX_CLK."       },       {         "number": "24",         "name": "PA2",         "type": "bidirectional",-        "description": "GPIO port A pin 2, 5V tolerant analog I/O, supports ADC12_INP14, WKUP1, timer and UART signals."+        "description": "5 V-tolerant I/O with analog option (FT_a); ADC12_INP14 and WKUP1 additional functions; alternate functions include TIM2_CH3, USART2_TX and ETH_MDIO."       },       {         "number": "25",         "name": "PA3",         "type": "bidirectional",-        "description": "GPIO port A pin 3, 5V tolerant I/O with high-speed low-voltage option, supports ADC12_INP15, timer, UART and LCD signals."+        "description": "5 V-tolerant I/O (FT_ha); ADC12_INP15 additional function; alternate functions include TIM2_CH4, USART2_RX, OTG_HS_ULPI_D0 and ETH_MII_COL."       },       {         "number": "26",         "name": "VSS",         "type": "power_in",-        "description": "Ground return path for digital circuits."+        "description": "Ground pin; all VSS pins must be connected to the external ground."       },       {         "number": "27",         "name": "VDD",         "type": "power_in",-        "description": "Main power supply voltage input, 1.62 to 3.6V, requires 100nF decoupling capacitor."+        "description": "Standard operating supply for I/Os and digital logic, 1.62 V to 3.6 V."       },       {         "number": "28",         "name": "PA4",         "type": "bidirectional",-        "description": "GPIO port A pin 4, 3.3V tolerant analog I/O, supports ADC12_INP18, DAC1_OUT1, D1PWREN and SPI/SAI signals, internal pull-up/pull-down must be disabled for voltages above 3.3V."+        "description": "3.3 V-tolerant I/O with analog option (TT_a); ADC12_INP18 and DAC1_OUT1 additional functions; alternate functions include D1PWREN, SPI1_NSS/I2S1_WS, USART2_CK and DCMI_HSYNC."       },       {         "number": "29",         "name": "PA5",         "type": "bidirectional",-        "description": "GPIO port A pin 5, 3.3V tolerant I/O with high-speed low-voltage option, supports ADC12 inputs, DAC1_OUT2, D2PWREN and SPI signals, internal pull-up/pull-down must be disabled for voltages above 3.3V."+        "description": "3.3 V-tolerant I/O (TT_ha); ADC12_INN18/ADC12_INP19 and DAC1_OUT2 additional functions; alternate functions include D2PWREN, TIM2_CH1/TIM2_ETR, SPI1_SCK/I2S1_CK and OTG_HS_ULPI_CK."       },       {         "number": "30",         "name": "PA6",         "type": "bidirectional",-        "description": "GPIO port A pin 6, 5V tolerant analog I/O, supports ADC12_INP3, SPI/timer signals and OPAMP1_VINM."+        "description": "5 V-tolerant I/O with analog option (FT_a); ADC12_INP3 additional function; alternate functions include TIM1_BKIN, TIM3_CH1, SPI1_MISO/I2S1_SDI and DCMI_PIXCLK."       },       {         "number": "31",         "name": "PA7",         "type": "bidirectional",-        "description": "GPIO port A pin 7, 3.3V tolerant analog I/O, supports ADC12 inputs, SPI signals, OPAMP1_VINM and Ethernet control."+        "description": "3.3 V-tolerant I/O with analog option (TT_a); ADC12_INN3, ADC12_INP7 and OPAMP1_VINM additional functions; alternate functions include TIM1_CH1N, TIM3_CH2, SPI1_MOSI/I2S1_SDO and FMC_SDNWE."       },       {         "number": "32",         "name": "PC4",         "type": "bidirectional",-        "description": "GPIO port C pin 4, 3.3V tolerant analog I/O, supports ADC12_INP4, OPAMP1_VOUT, COMP1_INM and Ethernet signals."+        "description": "3.3 V-tolerant I/O with analog option (TT_a); ADC12_INP4, OPAMP1_VOUT and COMP1_INM additional functions; alternate functions include DFSDM1_CKIN2, I2S1_MCK and ETH_MII_RXD0."       },       {         "number": "33",         "name": "PC5",         "type": "bidirectional",-        "description": "GPIO port C pin 5, 3.3V tolerant analog I/O, supports ADC12 inputs, OPAMP1_VINM, COMP1_OUT and Ethernet signals."+        "description": "3.3 V-tolerant I/O with analog option (TT_a); ADC12_INN4, ADC12_INP8 and OPAMP1_VINM additional functions; alternate functions include SAI1_D3, DFSDM1_DATIN2, ETH_MII_RXD1 and COMP1_OUT."       },       {         "number": "34",         "name": "PB0",         "type": "bidirectional",-        "description": "GPIO port B pin 0, 5V tolerant analog I/O, supports ADC12 inputs, OPAMP1_VINP, COMP1_INP and timer/UART signals."+        "description": "5 V-tolerant I/O with analog option (FT_a); ADC12_INN5, ADC12_INP9, OPAMP1_VINP and COMP1_INP additional functions; alternate functions include TIM1_CH2N, TIM3_CH3, OTG_HS_ULPI_D1 and ETH_MII_RXD2."       },       {         "number": "35",         "name": "PB1",         "type": "bidirectional",-        "description": "GPIO port B pin 1, 3.3V tolerant USB I/O, supports ADC12_INP5, COMP1_INM and timer signals."+        "description": "3.3 V-tolerant I/O with USB option (TT_u, supplied by VDD33USB); ADC12_INP5 and COMP1_INM additional functions; alternate functions include TIM1_CH3N, TIM3_CH4, OTG_HS_ULPI_D2 and ETH_MII_RXD3."       },       {         "number": "36",         "name": "PB2",         "type": "bidirectional",-        "description": "GPIO port B pin 2, 5V tolerant I/O with high-speed low-voltage option, supports COMP1_INP, RTC_OUT and SAI/SPI signals."+        "description": "5 V-tolerant high-speed I/O with analog option (FT_ha); COMP1_INP additional function; alternate functions include RTC_OUT, SAI1_D1, DFSDM1_CKIN1 and QUADSPI_CLK."       },       {         "number": "37",         "name": "PE7",         "type": "bidirectional",-        "description": "GPIO port E pin 7, 3.3V tolerant I/O with high-speed low-voltage option, supports OPAMP2_VOUT, COMP2_INM and UART/QUADSPI signals."+        "description": "3.3 V-tolerant high-speed I/O (TT_ha); OPAMP2_VOUT and COMP2_INM additional functions; alternate functions include TIM1_ETR, DFSDM1_DATIN2, UART7_RX, QUADSPI_BK2_IO0 and FMC_D4."       },       {         "number": "38",         "name": "PE8",         "type": "bidirectional",-        "description": "GPIO port E pin 8, 3.3V tolerant I/O with high-speed low-voltage option, supports OPAMP2_VINM, COMP2_OUT and UART/QUADSPI signals."+        "description": "3.3 V-tolerant high-speed I/O (TT_ha); OPAMP2_VINM additional function; alternate functions include TIM1_CH1N, DFSDM1_CKIN2, UART7_TX, QUADSPI_BK2_IO1, FMC_D5 and COMP2_OUT."       },       {         "number": "39",         "name": "PE9",         "type": "bidirectional",-        "description": "GPIO port E pin 9, 3.3V tolerant I/O with high-speed low-voltage option, supports OPAMP2_VINP, COMP2_INP and UART/QUADSPI signals."+        "description": "3.3 V-tolerant high-speed I/O (TT_ha); OPAMP2_VINP and COMP2_INP additional functions; alternate functions include TIM1_CH1, DFSDM1_CKOUT, UART7_RTS/UART7_DE, QUADSPI_BK2_IO2 and FMC_D6."       },       {         "number": "40",         "name": "PE10",         "type": "bidirectional",-        "description": "GPIO port E pin 10, 5V tolerant I/O with high-speed low-voltage option, supports COMP2_INM and UART/QUADSPI signals."+        "description": "5 V-tolerant high-speed I/O (FT_ha); COMP2_INM additional function; alternate functions include TIM1_CH2N, DFSDM1_DATIN4, UART7_CTS, QUADSPI_BK2_IO3 and FMC_D7."       },       {         "number": "41",         "name": "PE11",         "type": "bidirectional",-        "description": "GPIO port E pin 11, 5V tolerant I/O with high-speed low-voltage option, supports COMP2_INP and SAI/SPI signals."+        "description": "5 V-tolerant high-speed I/O (FT_ha); COMP2_INP additional function; alternate functions include TIM1_CH2, DFSDM1_CKIN4, SPI4_NSS, SAI2_SD_B, FMC_D8 and LCD_G3."       },       {         "number": "42",         "name": "PE12",         "type": "bidirectional",-        "description": "GPIO port E pin 12, 5V tolerant I/O with high-speed low-voltage option, supports COMP1_OUT and SPI/SAI signals."+        "description": "5 V-tolerant high-speed I/O (FT_h); alternate functions include TIM1_CH3N, DFSDM1_DATIN5, SPI4_SCK, SAI2_SCK_B, FMC_D9, COMP1_OUT and LCD_B4."       },       {         "number": "43",         "name": "PE13",         "type": "bidirectional",-        "description": "GPIO port E pin 13, 5V tolerant I/O with high-speed low-voltage option, supports COMP2_OUT and SPI signals."+        "description": "5 V-tolerant high-speed I/O (FT_h); alternate functions include TIM1_CH3, DFSDM1_CKIN5, SPI4_MISO, SAI2_FS_B, FMC_D10, COMP2_OUT and LCD_DE."       },       {         "number": "44",         "name": "PE14",         "type": "bidirectional",-        "description": "GPIO port E pin 14, 5V tolerant I/O with high-speed low-voltage option, supports timer and SPI signals."+        "description": "5 V-tolerant high-speed I/O (FT_h); alternate functions include TIM1_CH4, SPI4_MOSI, SAI2_MCLK_B, FMC_D11 and LCD_CLK."       },       {         "number": "45",         "name": "PE15",         "type": "bidirectional",-        "description": "GPIO port E pin 15, 5V tolerant I/O with high-speed low-voltage option, supports TIM1_BKIN and LCD/FMC signals."+        "description": "5 V-tolerant high-speed I/O (FT_h); alternate functions include TIM1_BKIN, FMC_D12, TIM1_BKIN_COMP12 and LCD_R7."       },       {         "number": "46",         "name": "PB10",         "type": "bidirectional",-        "description": "GPIO port B pin 10, 5V tolerant I/O with FM+ option, supports I2C2_SCL, timer, USART3 and QUADSPI signals."+        "description": "5 V-tolerant I/O with FM+ option (FT_f); alternate functions include TIM2_CH3, HRTIM_SCOUT, I2C2_SCL, SPI2_SCK/I2S2_CK, USART3_TX, OTG_HS_ULPI_D3 and ETH_MII_RX_ER."       },       {         "number": "47",         "name": "PB11",         "type": "bidirectional",-        "description": "GPIO port B pin 11, 5V tolerant I/O with FM+ option, supports I2C2_SDA, timer, USART3 and QUADSPI signals."+        "description": "5 V-tolerant I/O with FM+ option (FT_f); alternate functions include TIM2_CH4, HRTIM_SCIN, LPTIM2_ETR, I2C2_SDA, USART3_RX, OTG_HS_ULPI_D4 and ETH_MII_TX_EN."       },       {         "number": "48",         "name": "VCAP",-        "type": "power_in",-        "description": "Internal voltage regulator stabilization capacitor pin, requires 2.2\u00b5F external capacitor with <100m\u03a9 ESR."+        "type": "power_out",+        "description": "Output of the main regulator; connect a 2.2 µF external capacitor (±20%, ESR < 100 mΩ) to this pin, as specified in Table 25."       },       {         "number": "49",         "name": "VSS",         "type": "power_in",-        "description": "Ground return path for digital circuits."+        "description": "Ground pin; all VSS pins must be connected to the external ground."       },       {         "number": "50",         "name": "VDD",         "type": "power_in",-        "description": "Main power supply voltage input, 1.62 to 3.6V, requires 100nF decoupling capacitor."+        "description": "Standard operating supply for I/Os and digital logic, 1.62 V to 3.6 V."       },       {         "number": "51",         "name": "PB12",         "type": "bidirectional",-        "description": "GPIO port B pin 12, 5V tolerant USB I/O, supports I2C2_SMBA, SPI2, timer and FDCAN signals."+        "description": "5 V-tolerant I/O with USB option (FT_u, supplied by VDD33USB); alternate functions include TIM1_BKIN, I2C2_SMBA, SPI2_NSS/I2S2_WS, USART3_CK, FDCAN2_RX, OTG_HS_ULPI_D5 and OTG_HS_ID."       },       {         "number": "52",         "name": "PB13",         "type": "bidirectional",-        "description": "GPIO port B pin 13, 5V tolerant USB I/O, supports SPI2, timer, FDCAN signals and OTG_HS_VBUS."+        "description": "5 V-tolerant I/O with USB option (FT_u); OTG_HS_VBUS additional function; alternate functions include TIM1_CH1N, LPTIM2_OUT, SPI2_SCK/I2S2_CK, USART3_CTS, FDCAN2_TX and OTG_HS_ULPI_D6."       },       {         "number": "53",         "name": "PB14",         "type": "bidirectional",-        "description": "GPIO port B pin 14, 5V tolerant USB I/O, supports USART1, SPI2, timer and SDMMC2 signals."+        "description": "5 V-tolerant I/O with USB option (FT_u); alternate functions include TIM1_CH2N, TIM12_CH1, USART1_TX, SPI2_MISO/I2S2_SDI, USART3_RTS, UART4_RTS, SDMMC2_D0 and OTG_HS_DM."       },       {         "number": "54",         "name": "PB15",         "type": "bidirectional",-        "description": "GPIO port B pin 15, 5V tolerant USB I/O, supports USART1, SPI2, timer and SDMMC2 signals."+        "description": "5 V-tolerant I/O with USB option (FT_u); alternate functions include RTC_REFIN, TIM1_CH3N, TIM12_CH2, USART1_RX, SPI2_MOSI/I2S2_SDO, UART4_CTS, SDMMC2_D1 and OTG_HS_DP."       },       {         "number": "55",         "name": "PD8",         "type": "bidirectional",-        "description": "GPIO port D pin 8, 5V tolerant I/O with high-speed low-voltage option, supports USART3, DFSDM and SPDIFRX signals."+        "description": "5 V-tolerant high-speed I/O (FT_h); alternate functions include DFSDM1_CKIN3, SAI3_SCK_B, USART3_TX, SPDIFRX1_IN2 and FMC_D13."       },       {         "number": "56",         "name": "PD9",         "type": "bidirectional",-        "description": "GPIO port D pin 9, 5V tolerant I/O with high-speed low-voltage option, supports USART3 and DFSDM signals."+        "description": "5 V-tolerant high-speed I/O (FT_h); alternate functions include DFSDM1_DATIN3, SAI3_SD_B, USART3_RX, FDCAN2_RXFD_MODE and FMC_D14."       },       {         "number": "57",         "name": "PD10",         "type": "bidirectional",-        "description": "GPIO port D pin 10, 5V tolerant I/O with high-speed low-voltage option, supports USART3 and SAI signals."+        "description": "5 V-tolerant high-speed I/O (FT_h); alternate functions include DFSDM1_CKOUT, SAI3_FS_B, USART3_CK, FDCAN2_TXFD_MODE, FMC_D15 and LCD_B3."       },       {         "number": "58",         "name": "PD11",         "type": "bidirectional",-        "description": "GPIO port D pin 11, 5V tolerant I/O with high-speed low-voltage option, supports I2C4_SMBA, USART3 and QUADSPI signals."+        "description": "5 V-tolerant high-speed I/O (FT_h); alternate functions include LPTIM2_IN2, I2C4_SMBA, USART3_CTS, QUADSPI_BK1_IO0, SAI2_SD_A and FMC_A16."       },       {         "number": "59",         "name": "PD12",         "type": "bidirectional",-        "description": "GPIO port D pin 12, 5V tolerant I/O with FM+ option, supports I2C4_SCL, timer, USART3 and QUADSPI signals."+        "description": "5 V-tolerant high-speed I/O with FM+ option (FT_fh); alternate functions include LPTIM1_IN1, TIM4_CH1, I2C4_SCL, USART3_RTS, QUADSPI_BK1_IO1 and FMC_A17."       },       {         "number": "60",         "name": "PD13",         "type": "bidirectional",-        "description": "GPIO port D pin 13, 5V tolerant I/O with FM+ option, supports I2C4_SDA and QUADSPI signals."+        "description": "5 V-tolerant high-speed I/O with FM+ option (FT_fh); alternate functions include LPTIM1_OUT, TIM4_CH2, I2C4_SDA, QUADSPI_BK1_IO3 and FMC_A18."       },       {         "number": "61",         "name": "PD14",         "type": "bidirectional",-        "description": "GPIO port D pin 14, 5V tolerant I/O with high-speed low-voltage option, supports timer, SAI and UART8 signals."+        "description": "5 V-tolerant high-speed I/O (FT_h); alternate functions include TIM4_CH3, SAI3_MCLK_B, UART8_CTS and FMC_D0."       },       {         "number": "62",         "name": "PD15",         "type": "bidirectional",-        "description": "GPIO port D pin 15, 5V tolerant I/O with high-speed low-voltage option, supports timer, SAI and UART8 signals."+        "description": "5 V-tolerant high-speed I/O (FT_h); alternate functions include TIM4_CH4, SAI3_MCLK_A, UART8_RTS/UART8_DE and FMC_D1."       },       {         "number": "63",         "name": "PC6",         "type": "bidirectional",-        "description": "GPIO port C pin 6, 5V tolerant I/O with high-speed low-voltage option, supports USART6, timer, SDMMC and LCD signals."+        "description": "5 V-tolerant high-speed I/O (FT_h); alternate functions include HRTIM_CHA1, TIM3_CH1, TIM8_CH1, I2S2_MCK, USART6_TX, FMC_NWAIT and DCMI_D0; SWPMI_IO additional function."       },       {         "number": "64",         "name": "PC7",         "type": "bidirectional",-        "description": "GPIO port C pin 7, 5V tolerant I/O with high-speed low-voltage option, supports USART6, timer and SDMMC signals."+        "description": "5 V-tolerant high-speed I/O (FT_h); alternate functions include TRGIO, HRTIM_CHA2, TIM3_CH2, TIM8_CH2, I2S3_MCK, USART6_RX, FMC_NE1 and DCMI_D1."       },       {         "number": "65",         "name": "PC8",         "type": "bidirectional",-        "description": "GPIO port C pin 8, 5V tolerant I/O with high-speed low-voltage option, supports USART6, timer and SDMMC signals."+        "description": "5 V-tolerant high-speed I/O (FT_h); alternate functions include TRACED1, HRTIM_CHB1, TIM3_CH3, TIM8_CH3, USART6_CK, FMC_NE2/FMC_NCE, SWPMI_RX and DCMI_D2."       },       {         "number": "66",         "name": "PC9",         "type": "bidirectional",-        "description": "GPIO port C pin 9, 5V tolerant I/O with FM+ option, supports MCO2, timer, I2C3 and SDMMC signals."+        "description": "5 V-tolerant I/O with FM+ option (FT_fh); alternate functions include MCO2, TIM3_CH4, TIM8_CH4, I2C3_SDA, UART5_CTS, QUADSPI_BK1_IO0 and SDMMC1_D1."       },       {         "number": "67",         "name": "PA8",         "type": "bidirectional",-        "description": "GPIO port A pin 8, 5V tolerant I/O with FM+ option, supports MCO1, timer, I2C3 and UART signals."+        "description": "5 V-tolerant I/O with FM+ option and analog option (FT_fha); alternate functions include MCO1, TIM1_CH1, HRTIM_CHB2, I2C3_SCL, USART1_CK, OTG_FS_SOF and UART7_RX."       },       {         "number": "68",         "name": "PA9",         "type": "bidirectional",-        "description": "GPIO port A pin 9, 5V tolerant USB I/O, supports LPUART1, USART1, SPI2 and OTG_FS_VBUS."+        "description": "5 V-tolerant I/O with USB option (FT_u); OTG_FS_VBUS additional function; alternate functions include TIM1_CH2, HRTIM_CHC1, LPUART1_TX, I2C3_SMBA, SPI2_SCK/I2S2_CK, USART1_TX and DCMI_D0."       },       {         "number": "69",         "name": "PA10",         "type": "bidirectional",-        "description": "GPIO port A pin 10, 5V tolerant USB I/O, supports LPUART1, USART1 and FDCAN signals."+        "description": "5 V-tolerant I/O with USB option (FT_u); alternate functions include TIM1_CH3, HRTIM_CHC2, LPUART1_RX, USART1_RX, OTG_FS_ID, MDIOS_MDIO and DCMI_D1."       },       {         "number": "70",         "name": "PA11",         "type": "bidirectional",-        "description": "GPIO port A pin 11, 5V tolerant USB I/O, supports LPUART1, USART1, UART4 and OTG_FS_DM."+        "description": "5 V-tolerant I/O with USB option (FT_u); alternate functions include TIM1_CH4, HRTIM_CHD1, LPUART1_CTS, SPI2_NSS/I2S2_WS, UART4_RX, USART1_CTS, FDCAN1_RX and OTG_FS_DM."       },       {         "number": "71",         "name": "PA12",         "type": "bidirectional",-        "description": "GPIO port A pin 12, 5V tolerant USB I/O, supports LPUART1, USART1, UART4 and OTG_FS_DP."+        "description": "5 V-tolerant I/O with USB option (FT_u); alternate functions include TIM1_ETR, HRTIM_CHD2, LPUART1_RTS/LPUART1_DE, SPI2_SCK/I2S2_CK, UART4_TX, USART1_RTS/USART1_DE, FDCAN1_TX and OTG_FS_DP."       },       {         "number": "72",         "name": "PA13",         "type": "bidirectional",-        "description": "GPIO port A pin 13 / JTAG test mode select, 5V tolerant I/O, supports JTMS-SWDIO debug interface."+        "description": "5 V-tolerant I/O (FT); default function JTMS-SWDIO (SWD debug data)."       },       {         "number": "73",         "name": "VCAP",-        "type": "power_in",-        "description": "Internal voltage regulator stabilization capacitor pin, requires 2.2\u00b5F external capacitor with <100m\u03a9 ESR."+        "type": "power_out",+        "description": "Output of the main regulator; connect a 2.2 µF external capacitor (±20%, ESR < 100 mΩ) to this pin, as specified in Table 25."       },       {         "number": "74",         "name": "VSS",         "type": "power_in",-        "description": "Ground return path for digital circuits."+        "description": "Ground pin; all VSS pins must be connected to the external ground."       },       {         "number": "75",         "name": "VDD",         "type": "power_in",-        "description": "Main power supply voltage input, 1.62 to 3.6V, requires 100nF decoupling capacitor."+        "description": "Standard operating supply for I/Os and digital logic, 1.62 V to 3.6 V."       },       {         "number": "76",         "name": "PA14",         "type": "bidirectional",-        "description": "GPIO port A pin 14 / JTAG test clock, 5V tolerant I/O, supports JTCK-SWCLK debug interface."+        "description": "5 V-tolerant I/O (FT); default function JTCK-SWCLK (SWD clock)."       },       {         "number": "77",         "name": "PA15",         "type": "bidirectional",-        "description": "GPIO port A pin 15 / JTAG data input, 5V tolerant I/O, supports JTDI and multiple peripheral signals."+        "description": "5 V-tolerant I/O (FT); default function JTDI; alternate functions include TIM2_CH1/TIM2_ETR, HRTIM_FLT1, CEC, SPI1_NSS/I2S1_WS and UART4_RTS."       },       {         "number": "78",         "name": "PC10",         "type": "bidirectional",-        "description": "GPIO port C pin 10, 5V tolerant I/O with high-speed low-voltage option, supports USART3, UART4, SPI3 and QUADSPI signals."+        "description": "5 V-tolerant high-speed I/O (FT_ha); alternate functions include HRTIM_EEV1, DFSDM1_CKIN5, SPI3_SCK/I2S3_CK, USART3_TX, UART4_TX, QUADSPI_BK1_IO1, SDMMC1_D2 and DCMI_D8."       },       {         "number": "79",         "name": "PC11",         "type": "bidirectional",-        "description": "GPIO port C pin 11, 5V tolerant I/O with high-speed low-voltage option, supports USART3, UART4 and SPI3 signals."+        "description": "5 V-tolerant high-speed I/O (FT_h); alternate functions include HRTIM_FLT2, DFSDM1_DATIN5, SPI3_MISO/I2S3_SDI, USART3_RX, UART4_RX, QUADSPI_BK2_NCS, SDMMC1_D3 and DCMI_D4."       },       {         "number": "80",         "name": "PC12",         "type": "bidirectional",-        "description": "GPIO port C pin 12, 5V tolerant I/O with high-speed low-voltage option, supports USART3, UART5 and SPI3 signals."+        "description": "5 V-tolerant high-speed I/O (FT_h); alternate functions include TRACED3, HRTIM_EEV2, SPI3_MOSI/I2S3_SDO, USART3_CK, UART5_TX, SDMMC1_CK and DCMI_D9."       },       {         "number": "81",         "name": "PD0",         "type": "bidirectional",-        "description": "GPIO port D pin 0, 5V tolerant I/O with high-speed low-voltage option, supports UART4 and FDCAN signals."+        "description": "5 V-tolerant high-speed I/O (FT_h); alternate functions include DFSDM1_CKIN6, SAI3_SCK_A, UART4_RX, FDCAN1_RX and FMC_D2."       },       {         "number": "82",         "name": "PD1",         "type": "bidirectional",-        "description": "GPIO port D pin 1, 5V tolerant I/O with high-speed low-voltage option, supports UART4 and FDCAN signals."+        "description": "5 V-tolerant high-speed I/O (FT_h); alternate functions include DFSDM1_DATIN6, SAI3_SD_A, UART4_TX, FDCAN1_TX and FMC_D3."       },       {         "number": "83",         "name": "PD2",         "type": "bidirectional",-        "description": "GPIO port D pin 2, 5V tolerant I/O with high-speed low-voltage option, supports UART5, SDMMC1 and DCMI signals."+        "description": "5 V-tolerant high-speed I/O (FT_h); alternate functions include TRACED2, TIM3_ETR, UART5_RX, SDMMC1_CMD and DCMI_D11."       },       {         "number": "84",         "name": "PD3",         "type": "bidirectional",-        "description": "GPIO port D pin 3, 5V tolerant I/O with high-speed low-voltage option, supports USART2 and SPI2 signals."+        "description": "5 V-tolerant high-speed I/O (FT_h); alternate functions include DFSDM1_CKOUT, SPI2_SCK/I2S2_CK, USART2_CTS/USART2_NSS, FMC_CLK, DCMI_D5 and LCD_G7."       },       {         "number": "85",         "name": "PD4",         "type": "bidirectional",-        "description": "GPIO port D pin 4, 5V tolerant I/O with high-speed low-voltage option, supports USART2 and FDCAN signals."+        "description": "5 V-tolerant high-speed I/O (FT_h); alternate functions include HRTIM_FLT3, SAI3_FS_A, USART2_RTS/USART2_DE, FDCAN1_RXFD_MODE and FMC_NOE."       },       {         "number": "86",         "name": "PD5",         "type": "bidirectional",-        "description": "GPIO port D pin 5, 5V tolerant I/O with high-speed low-voltage option, supports USART2 and FDCAN signals."+        "description": "5 V-tolerant high-speed I/O (FT_h); alternate functions include HRTIM_EEV3, USART2_TX, FDCAN1_TXFD_MODE and FMC_NWE."       },       {         "number": "87",         "name": "PD6",         "type": "bidirectional",-        "description": "GPIO port D pin 6, 5V tolerant I/O with high-speed low-voltage option, supports USART2, SAI, SPI3 and SDMMC signals."+        "description": "5 V-tolerant high-speed I/O (FT_h); alternate functions include SAI1_D1, DFSDM1_DATIN1, SPI3_MOSI/I2S3_SDO, USART2_RX, FDCAN2_RXFD_MODE, SDMMC2_CK, FMC_NWAIT, DCMI_D10 and LCD_B2."       },       {         "number": "88",         "name": "PD7",         "type": "bidirectional",-        "description": "GPIO port D pin 7, 5V tolerant I/O with high-speed low-voltage option, supports USART2, SPI1 and SDMMC signals."+        "description": "5 V-tolerant high-speed I/O (FT_h); alternate functions include DFSDM1_DATIN4, SPI1_MOSI/I2S1_SDO, USART2_CK, SPDIFRX1_IN1, SDMMC2_CMD and FMC_NE1."       },       {         "number": "89",         "name": "PB3",         "type": "bidirectional",-        "description": "GPIO port B pin 3 / JTAG data output, 5V tolerant I/O, supports JTDO/TRACESWO debug interface and SPI/timer signals."+        "description": "5 V-tolerant I/O (FT); default function JTDO/TRACESWO; alternate functions include TIM2_CH2, HRTIM_FLT4, SPI1_SCK/I2S1_CK, SPI3_SCK/I2S3_CK, SDMMC2_D2 and UART7_RX."       },       {         "number": "90",         "name": "PB4",         "type": "bidirectional",-        "description": "GPIO port B pin 4 / JTAG test reset, 5V tolerant I/O, supports NJTRST debug and SPI/timer signals."+        "description": "5 V-tolerant I/O (FT); default function NJTRST; alternate functions include TIM16_BKIN, TIM3_CH1, HRTIM_EEV6, SPI1_MISO/I2S1_SDI, SPI3_MISO/I2S3_SDI, SDMMC2_D3 and UART7_TX."       },       {         "number": "91",         "name": "PB5",         "type": "bidirectional",-        "description": "GPIO port B pin 5, 5V tolerant I/O, supports I2C1_SMBA, SPI1 and FDCAN signals."+        "description": "5 V-tolerant I/O (FT); alternate functions include TIM17_BKIN, TIM3_CH2, HRTIM_EEV7, I2C1_SMBA, SPI1_MOSI/I2S1_SDO, FDCAN2_RX, OTG_HS_ULPI_D7, FMC_SDCKE1 and DCMI_D10."       },       {         "number": "92",         "name": "PB6",         "type": "bidirectional",-        "description": "GPIO port B pin 6, 5V tolerant I/O with FM+ option, supports I2C1_SCL, USART1 and FDCAN signals."+        "description": "5 V-tolerant I/O with FM+ option (FT_f); alternate functions include TIM16_CH1N, TIM4_CH1, I2C1_SCL, CEC, USART1_TX, LPUART1_TX, FDCAN2_TX, QUADSPI_BK1_NCS and FMC_SDNE1."       },       {         "number": "93",         "name": "PB7",         "type": "bidirectional",-        "description": "GPIO port B pin 7, 5V tolerant I/O with FM+ option, supports I2C1_SDA, USART1 and FDCAN signals."+        "description": "5 V-tolerant I/O with FM+ and analog option (FT_fa); PVD_IN additional function; alternate functions include TIM17_CH1N, TIM4_CH2, I2C1_SDA, USART1_RX, LPUART1_RX, FDCAN2_TXFD_MODE and FMC_NL."       },       {         "number": "94",         "name": "BOOT0",         "type": "input",-        "description": "Boot mode selection input pin, accepts 0 to 9V input, determines boot source at reset (flash or system memory)."+        "description": "Dedicated BOOT0 boot-mode input; input voltage limited to 9.0 V (VPP additional function)."       },       {         "number": "95",         "name": "PB8",         "type": "bidirectional",-        "description": "GPIO port B pin 8, 5V tolerant I/O with FM+ option, supports I2C1_SCL, timer, UART4 and FDCAN signals."+        "description": "5 V-tolerant high-speed I/O with FM+ option (FT_fh); alternate functions include TIM16_CH1, TIM4_CH3, DFSDM1_CKIN7, I2C1_SCL, SDMMC1_CKIN, FDCAN1_RX, ETH_MII_TXD3 and DCMI_D6."       },       {         "number": "96",         "name": "PB9",         "type": "bidirectional",-        "description": "GPIO port B pin 9, 5V tolerant I/O with FM+ option, supports I2C1_SDA, timer, UART4 and FDCAN signals."+        "description": "5 V-tolerant high-speed I/O with FM+ option (FT_fh); alternate functions include TIM17_CH1, TIM4_CH4, DFSDM1_DATIN7, I2C1_SDA, SPI2_NSS/I2S2_WS, SDMMC1_CDIR, FDCAN1_TX and DCMI_D7."       },       {         "number": "97",         "name": "PE0",         "type": "bidirectional",-        "description": "GPIO port E pin 0, 5V tolerant I/O with high-speed low-voltage option, supports LPTIM1/2, UART8 and FDCAN signals."+        "description": "5 V-tolerant high-speed I/O (FT_h); alternate functions include LPTIM1_ETR, TIM4_ETR, HRTIM_SCIN, UART8_RX, FDCAN1_RXFD_MODE, SAI2_MCLK_A, FMC_NBL0 and DCMI_D2."       },       {         "number": "98",         "name": "PE1",         "type": "bidirectional",-        "description": "GPIO port E pin 1, 5V tolerant I/O with high-speed low-voltage option, supports LPTIM1 and UART8 signals."+        "description": "5 V-tolerant high-speed I/O (FT_h); alternate functions include LPTIM1_IN2, HRTIM_SCOUT, UART8_TX, FDCAN1_TXFD_MODE, FMC_NBL1 and DCMI_D3."       },       {         "number": "99",         "name": "VSS",         "type": "power_in",-        "description": "Ground return path for digital circuits."+        "description": "Ground pin; all VSS pins must be connected to the external ground."       },       {         "number": "100",         "name": "VDD",         "type": "power_in",-        "description": "Main power supply voltage input, 1.62 to 3.6V, requires 100nF decoupling capacitor."+        "description": "Standard operating supply for I/Os and digital logic, 1.62 V to 3.6 V."       }     ],     "provenance": {-      "extractor": "extract_pins 0.2",+      "extractor": "extract_pins 0.3",       "factory_chain": {         "factory": "2.0.0",-        "extractor": "extract_pins 0.2",-        "primary_model": "claude-haiku-4-5-20251001",+        "extractor": "extract_pins 0.3",+        "primary_model": "claude-haiku-5-5",         "primary_mode": "text",-        "consensus_model": "claude-sonnet-5",+        "consensus_model": "claude-sonnet-5-5",         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: PC2 and PC3 pins have dual analog/digital configuration via internal analog switch controlled by SYS; VDDLDO pin not present on LQFP100 package - datasheet note 8 on page 88 indicates this pin is intern"+          "extractor flagged: Pin descriptions are condensed: the alternate-function and additional-function lists are abbreviated; The datasheet does not state per-pin electrical limits beyond the I/O structure classes (FT = 5 V to; VCAP pins (48, 73) are listed as supply pins (S) in Table 9; typed as power_out here because they ar"         ],         "pages_sent": 105,-        "cost_usd": 1.6726,-        "at": "2026-09-23T09:36:23"+        "cost_usd": 0.7513,+        "at": "2026-11-10T22:52:39"       },       "datasheet": {         "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588893876479909888",@@ -684,6 +700,94 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"+    },+    "models_3d": [+      {+        "file": "stm32h743vit6.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          16.0,+          16.0,+          1.5+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "51720097260ffba41c3062f85f67623721102fa535901c47cb555a1f444feeb3",+        "checked": "2026-11-10",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "stm32h743vit6-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          16.0,+          16.0,+          1.5+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "ac2017a7790f0bd18eae8c5356020531c0fc37366ce5b9d53b3ad5d875f66796",+        "checked": "2026-11-10",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ],+    "package_dims": {+      "package_code": "LQFP100",+      "source_page": 324,+      "D": {+        "nom_mm": 14.0,+        "range_mm": [+          13.8,+          14.2+        ]+      },+      "E1": {+        "nom_mm": 14.0,+        "range_mm": [+          13.8,+          14.2+        ]+      },+      "E": {+        "nom_mm": 16.0,+        "range_mm": [+          15.8,+          16.2+        ]+      },+      "e": {+        "nom_mm": 0.5,+        "range_mm": [+          null,+          null+        ]+      },+      "A": {+        "nom_mm": 1.6,+        "range_mm": [+          null,+          1.6+        ]+      },+      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",+      "model_check": {+        "file": "stm32h743vit6.step",+        "verdict": "PASS",+        "reasons": [+          "height and body within the datasheet's package drawing"+        ],+        "by": "factory/package_fit.py"+      }     }   }-}\ No newline at end of file+}
page.json+222−116
@@ -4,7 +4,7 @@   "slug": "stm32h743vit6",   "title": "STM32H743VIT6",   "brief": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-100(14x14). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.",-  "version": "0.1.0",+  "version": "0.1.1",   "license": "CC-BY-SA-4.0",   "tags": [     "component",@@ -24,8 +24,8 @@     "parts": {       "symbol": "stm32h743vit6.kicad_sym",       "footprint": "stm32h743vit6.kicad_mod",-      "model_3d": "stm32h743vit6-etched.glb",-      "model_3d_plain": "stm32h743vit6.glb",+      "model_3d": "stm32h743vit6-hero.glb",+      "model_3d_plain": "stm32h743vit6-etched.glb",       "model_3d_step": "stm32h743vit6-etched.step",       "model_3d_step_plain": "stm32h743vit6.step",       "lbr": "stm32h743vit6.lbr"@@ -33,624 +33,637 @@     "distributor_links": {       "lcsc": "C114409"     },+    "distributor_check": {+      "checked_at": "2026-11-10T22:52:57Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": null,+        "status": "deferred",+        "error": "shared DigiKey quota guard: 0 calls left today"+      },+      "mouser": {+        "pn": null,+        "status": "quota"+      }+    },     "pins": [       {         "number": "1",         "name": "PE2",         "type": "bidirectional",-        "description": "GPIO port E pin 2, 5V tolerant I/O with high-speed low-voltage option, supports TRACECLK, SAI1_CK1, SPI4_SCK and multiple alternate functions including FMC address and LCD controller signals."+        "description": "5 V-tolerant high-speed I/O (FT_h); alternate functions include TRACECLK, SAI1_CK1, SPI4_SCK, QUADSPI_BK1_IO2 and FMC_A23."       },       {         "number": "2",         "name": "PE3",         "type": "bidirectional",-        "description": "GPIO port E pin 3, 5V tolerant I/O with high-speed low-voltage option, supports TRACED0, TIM15_BKIN, SAI1_SD_B and FMC address signals."+        "description": "5 V-tolerant high-speed I/O (FT_h); alternate functions include TRACED0, TIM15_BKIN, SAI1_SD_B and FMC_A19."       },       {         "number": "3",         "name": "PE4",         "type": "bidirectional",-        "description": "GPIO port E pin 4, 5V tolerant I/O with high-speed low-voltage option, supports TRACED1, SAI1_D2, SPI4_NSS and DCMI/LCD control signals."+        "description": "5 V-tolerant high-speed I/O (FT_h); alternate functions include TRACED1, SAI1_D2, SPI4_NSS, DCMI_D4 and LCD_B0."       },       {         "number": "4",         "name": "PE5",         "type": "bidirectional",-        "description": "GPIO port E pin 5, 5V tolerant I/O with high-speed low-voltage option, supports TRACED2, SAI1_CK2, SPI4_MISO and DCMI/LCD signals."+        "description": "5 V-tolerant high-speed I/O (FT_h); alternate functions include TRACED2, SAI1_CK2, TIM15_CH1, SPI4_MISO, DCMI_D6 and LCD_G0."       },       {         "number": "5",         "name": "PE6",         "type": "bidirectional",-        "description": "GPIO port E pin 6, 5V tolerant I/O with high-speed low-voltage option, supports TRACED3, TIM1_BKIN2, SAI1_D1 and FMC/LCD signals."+        "description": "5 V-tolerant high-speed I/O (FT_h); alternate functions include TRACED3, TIM1_BKIN2, SAI1_D1, SPI4_MOSI, DCMI_D7 and LCD_G1."       },       {         "number": "6",         "name": "VBAT",         "type": "power_in",-        "description": "Battery backup supply voltage input, 1.2 to 3.6V for backup domain power supply."+        "description": "Backup/battery supply for the VBAT domain (RTC/LSE, backup registers), with battery charging capability; external supply must stay within the 4.0 V absolute maximum."       },       {         "number": "7",         "name": "PC13",         "type": "bidirectional",-        "description": "GPIO port C pin 13, 5V tolerant I/O, supports RTC_TAMP1/WKUP2 and external interrupt capability."+        "description": "5 V-tolerant I/O (FT); additional functions RTC_TAMP1, RTC_TS and WKUP2; EVENTOUT alternate function."       },       {         "number": "8",         "name": "PC14-OSC32_IN",         "type": "bidirectional",-        "description": "GPIO port C pin 14 / 32.768 kHz oscillator input, 5V tolerant I/O, functions as external oscillator input when configured."+        "description": "5 V-tolerant I/O (FT); can be used as the LSE 32.768 kHz oscillator input OSC32_IN."       },       {         "number": "9",         "name": "PC15-OSC32_OUT",         "type": "bidirectional",-        "description": "GPIO port C pin 15 / 32.768 kHz oscillator output, 5V tolerant I/O, functions as external oscillator output when configured."+        "description": "5 V-tolerant I/O (FT); can be used as the LSE 32.768 kHz oscillator output OSC32_OUT."       },       {         "number": "10",         "name": "VSS",         "type": "power_in",-        "description": "Ground return path for digital circuits."+        "description": "Ground pin; all VSS pins must be connected to the external ground."       },       {         "number": "11",         "name": "VDD",         "type": "power_in",-        "description": "Main power supply voltage input, 1.62 to 3.6V, requires 100nF decoupling capacitor."+        "description": "Standard operating supply for I/Os and digital logic, 1.62 V to 3.6 V."       },       {         "number": "12",         "name": "PH0-OSC_IN",         "type": "bidirectional",-        "description": "GPIO port H pin 0 / main oscillator input, 5V tolerant I/O, supports external oscillator (4-48 MHz HSE)."+        "description": "5 V-tolerant I/O (FT); HSE oscillator input OSC_IN for the 4-48 MHz external oscillator."       },       {         "number": "13",         "name": "PH1-OSC_OUT",         "type": "bidirectional",-        "description": "GPIO port H pin 1 / main oscillator output, 5V tolerant I/O, supports external oscillator output."+        "description": "5 V-tolerant I/O (FT); HSE oscillator output OSC_OUT for the 4-48 MHz external oscillator."       },       {         "number": "14",         "name": "NRST",         "type": "bidirectional",-        "description": "Reset input pin with embedded weak pull-up resistor and Schmitt trigger, active low reset, 5V tolerant."+        "description": "Bidirectional reset pin with embedded weak pull-up resistor."       },       {         "number": "15",         "name": "PC0",         "type": "bidirectional",-        "description": "GPIO port C pin 0, 5V tolerant analog/digital I/O, supports ADC123_INP10, DFSDM1_CKIN0 and FMC/LCD signals."+        "description": "5 V-tolerant I/O with analog option supplied by VDDA (FT_a); ADC123_INP10 additional function; alternate functions include DFSDM1_CKIN0, SAI2_FS_B, OTG_HS_ULPI_STP and FMC_SDNWE."       },       {         "number": "16",         "name": "PC1",         "type": "bidirectional",-        "description": "GPIO port C pin 1, 5V tolerant I/O with high-speed low-voltage option, supports ADC123 inputs, DFSDM signals and SDMMC/ETH peripherals."+        "description": "5 V-tolerant I/O (FT_ha); ADC123_INP11/ADC123_INN10 and RTC_TAMP3/WKUP5 additional functions; alternate functions include TRACED0, SAI1_D1, SPI2_MOSI/I2S2_SDO and ETH_MDC."       },       {         "number": "17",         "name": "PC2_C",-        "type": "bidirectional",-        "description": "Analog-only GPIO port C pin 2, 3.3V tolerant, provides access to ADC3_INN1 and ADC3_INP0 when analog switch is open."+        "type": "passive",+        "description": "Analog pad (Pxy_C) connected to PC2 through an analog switch configured in SYSCFG; 3.3 V-tolerant TT_a I/O supplied by VDDA; ADC3_INN1 and ADC3_INP0 additional functions."       },       {         "number": "18",         "name": "PC3_C",-        "type": "bidirectional",-        "description": "Analog-only GPIO port C pin 3, 3.3V tolerant, provides access to ADC3_INP1 when analog switch is open."+        "type": "passive",+        "description": "Analog pad (Pxy_C) connected to PC3 through an analog switch configured in SYSCFG; 3.3 V-tolerant TT_a I/O supplied by VDDA; ADC3_INP1 additional function."       },       {         "number": "19",         "name": "VSSA",         "type": "power_in",-        "description": "Analog ground return path, must be connected to VSS externally."+        "description": "Ground for the analog domain (ADC, DAC, OPAMP, COMP and reference)."       },       {         "number": "20",         "name": "VREF+",         "type": "power_in",-        "description": "Positive reference voltage for ADC, 1.62 to 3.6V, requires 100nF + 1µF decoupling capacitors."+        "description": "Positive reference voltage input for the ADC/DAC analog peripherals; available on this package."       },       {         "number": "21",         "name": "VDDA",         "type": "power_in",-        "description": "Analog power supply voltage, 1.62 to 3.6V for ADC/DAC/OPAMP/COMP operation, requires 100nF + 1µF capacitors."+        "description": "Analog supply: 1.62 V to 3.6 V when ADC or COMP is used (1.8 V minimum for DAC, 2.0 V for OPAMP, 1.8 V for VREFBUF)."       },       {         "number": "22",         "name": "PA0",         "type": "bidirectional",-        "description": "GPIO port A pin 0, 5V tolerant analog I/O, supports ADC1_INP16, WKUP0, timer and UART signals, DAC1_OUT1."+        "description": "5 V-tolerant I/O with analog option (FT_a); ADC1_INP16 and WKUP0 additional functions; alternate functions include TIM2_CH1/TIM2_ETR, USART2_CTS, UART4_TX and ETH_MII_CRS."       },       {         "number": "23",         "name": "PA1",         "type": "bidirectional",-        "description": "GPIO port A pin 1, 5V tolerant I/O with high-speed low-voltage option, supports ADC1 inputs, timer and UART signals."+        "description": "5 V-tolerant I/O (FT_ha); ADC1_INN16/ADC1_INP17 additional functions; alternate functions include TIM2_CH2, USART2_RTS, UART4_RX and ETH_MII_RX_CLK."       },       {         "number": "24",         "name": "PA2",         "type": "bidirectional",-        "description": "GPIO port A pin 2, 5V tolerant analog I/O, supports ADC12_INP14, WKUP1, timer and UART signals."+        "description": "5 V-tolerant I/O with analog option (FT_a); ADC12_INP14 and WKUP1 additional functions; alternate functions include TIM2_CH3, USART2_TX and ETH_MDIO."       },       {         "number": "25",         "name": "PA3",         "type": "bidirectional",-        "description": "GPIO port A pin 3, 5V tolerant I/O with high-speed low-voltage option, supports ADC12_INP15, timer, UART and LCD signals."+        "description": "5 V-tolerant I/O (FT_ha); ADC12_INP15 additional function; alternate functions include TIM2_CH4, USART2_RX, OTG_HS_ULPI_D0 and ETH_MII_COL."       },       {         "number": "26",         "name": "VSS",         "type": "power_in",-        "description": "Ground return path for digital circuits."+        "description": "Ground pin; all VSS pins must be connected to the external ground."       },       {         "number": "27",         "name": "VDD",         "type": "power_in",-        "description": "Main power supply voltage input, 1.62 to 3.6V, requires 100nF decoupling capacitor."+        "description": "Standard operating supply for I/Os and digital logic, 1.62 V to 3.6 V."       },       {         "number": "28",         "name": "PA4",         "type": "bidirectional",-        "description": "GPIO port A pin 4, 3.3V tolerant analog I/O, supports ADC12_INP18, DAC1_OUT1, D1PWREN and SPI/SAI signals, internal pull-up/pull-down must be disabled for voltages above 3.3V."+        "description": "3.3 V-tolerant I/O with analog option (TT_a); ADC12_INP18 and DAC1_OUT1 additional functions; alternate functions include D1PWREN, SPI1_NSS/I2S1_WS, USART2_CK and DCMI_HSYNC."       },       {         "number": "29",         "name": "PA5",         "type": "bidirectional",-        "description": "GPIO port A pin 5, 3.3V tolerant I/O with high-speed low-voltage option, supports ADC12 inputs, DAC1_OUT2, D2PWREN and SPI signals, internal pull-up/pull-down must be disabled for voltages above 3.3V."+        "description": "3.3 V-tolerant I/O (TT_ha); ADC12_INN18/ADC12_INP19 and DAC1_OUT2 additional functions; alternate functions include D2PWREN, TIM2_CH1/TIM2_ETR, SPI1_SCK/I2S1_CK and OTG_HS_ULPI_CK."       },       {         "number": "30",         "name": "PA6",         "type": "bidirectional",-        "description": "GPIO port A pin 6, 5V tolerant analog I/O, supports ADC12_INP3, SPI/timer signals and OPAMP1_VINM."+        "description": "5 V-tolerant I/O with analog option (FT_a); ADC12_INP3 additional function; alternate functions include TIM1_BKIN, TIM3_CH1, SPI1_MISO/I2S1_SDI and DCMI_PIXCLK."       },       {         "number": "31",         "name": "PA7",         "type": "bidirectional",-        "description": "GPIO port A pin 7, 3.3V tolerant analog I/O, supports ADC12 inputs, SPI signals, OPAMP1_VINM and Ethernet control."+        "description": "3.3 V-tolerant I/O with analog option (TT_a); ADC12_INN3, ADC12_INP7 and OPAMP1_VINM additional functions; alternate functions include TIM1_CH1N, TIM3_CH2, SPI1_MOSI/I2S1_SDO and FMC_SDNWE."       },       {         "number": "32",         "name": "PC4",         "type": "bidirectional",-        "description": "GPIO port C pin 4, 3.3V tolerant analog I/O, supports ADC12_INP4, OPAMP1_VOUT, COMP1_INM and Ethernet signals."+        "description": "3.3 V-tolerant I/O with analog option (TT_a); ADC12_INP4, OPAMP1_VOUT and COMP1_INM additional functions; alternate functions include DFSDM1_CKIN2, I2S1_MCK and ETH_MII_RXD0."       },       {         "number": "33",         "name": "PC5",         "type": "bidirectional",-        "description": "GPIO port C pin 5, 3.3V tolerant analog I/O, supports ADC12 inputs, OPAMP1_VINM, COMP1_OUT and Ethernet signals."+        "description": "3.3 V-tolerant I/O with analog option (TT_a); ADC12_INN4, ADC12_INP8 and OPAMP1_VINM additional functions; alternate functions include SAI1_D3, DFSDM1_DATIN2, ETH_MII_RXD1 and COMP1_OUT."       },       {         "number": "34",         "name": "PB0",         "type": "bidirectional",-        "description": "GPIO port B pin 0, 5V tolerant analog I/O, supports ADC12 inputs, OPAMP1_VINP, COMP1_INP and timer/UART signals."+        "description": "5 V-tolerant I/O with analog option (FT_a); ADC12_INN5, ADC12_INP9, OPAMP1_VINP and COMP1_INP additional functions; alternate functions include TIM1_CH2N, TIM3_CH3, OTG_HS_ULPI_D1 and ETH_MII_RXD2."       },       {         "number": "35",         "name": "PB1",         "type": "bidirectional",-        "description": "GPIO port B pin 1, 3.3V tolerant USB I/O, supports ADC12_INP5, COMP1_INM and timer signals."+        "description": "3.3 V-tolerant I/O with USB option (TT_u, supplied by VDD33USB); ADC12_INP5 and COMP1_INM additional functions; alternate functions include TIM1_CH3N, TIM3_CH4, OTG_HS_ULPI_D2 and ETH_MII_RXD3."       },       {         "number": "36",         "name": "PB2",         "type": "bidirectional",-        "description": "GPIO port B pin 2, 5V tolerant I/O with high-speed low-voltage option, supports COMP1_INP, RTC_OUT and SAI/SPI signals."+        "description": "5 V-tolerant high-speed I/O with analog option (FT_ha); COMP1_INP additional function; alternate functions include RTC_OUT, SAI1_D1, DFSDM1_CKIN1 and QUADSPI_CLK."       },       {         "number": "37",         "name": "PE7",         "type": "bidirectional",-        "description": "GPIO port E pin 7, 3.3V tolerant I/O with high-speed low-voltage option, supports OPAMP2_VOUT, COMP2_INM and UART/QUADSPI signals."+        "description": "3.3 V-tolerant high-speed I/O (TT_ha); OPAMP2_VOUT and COMP2_INM additional functions; alternate functions include TIM1_ETR, DFSDM1_DATIN2, UART7_RX, QUADSPI_BK2_IO0 and FMC_D4."       },       {         "number": "38",         "name": "PE8",         "type": "bidirectional",-        "description": "GPIO port E pin 8, 3.3V tolerant I/O with high-speed low-voltage option, supports OPAMP2_VINM, COMP2_OUT and UART/QUADSPI signals."+        "description": "3.3 V-tolerant high-speed I/O (TT_ha); OPAMP2_VINM additional function; alternate functions include TIM1_CH1N, DFSDM1_CKIN2, UART7_TX, QUADSPI_BK2_IO1, FMC_D5 and COMP2_OUT."       },       {         "number": "39",         "name": "PE9",         "type": "bidirectional",-        "description": "GPIO port E pin 9, 3.3V tolerant I/O with high-speed low-voltage option, supports OPAMP2_VINP, COMP2_INP and UART/QUADSPI signals."+        "description": "3.3 V-tolerant high-speed I/O (TT_ha); OPAMP2_VINP and COMP2_INP additional functions; alternate functions include TIM1_CH1, DFSDM1_CKOUT, UART7_RTS/UART7_DE, QUADSPI_BK2_IO2 and FMC_D6."       },       {         "number": "40",         "name": "PE10",         "type": "bidirectional",-        "description": "GPIO port E pin 10, 5V tolerant I/O with high-speed low-voltage option, supports COMP2_INM and UART/QUADSPI signals."+        "description": "5 V-tolerant high-speed I/O (FT_ha); COMP2_INM additional function; alternate functions include TIM1_CH2N, DFSDM1_DATIN4, UART7_CTS, QUADSPI_BK2_IO3 and FMC_D7."       },       {         "number": "41",         "name": "PE11",         "type": "bidirectional",-        "description": "GPIO port E pin 11, 5V tolerant I/O with high-speed low-voltage option, supports COMP2_INP and SAI/SPI signals."+        "description": "5 V-tolerant high-speed I/O (FT_ha); COMP2_INP additional function; alternate functions include TIM1_CH2, DFSDM1_CKIN4, SPI4_NSS, SAI2_SD_B, FMC_D8 and LCD_G3."       },       {         "number": "42",         "name": "PE12",         "type": "bidirectional",-        "description": "GPIO port E pin 12, 5V tolerant I/O with high-speed low-voltage option, supports COMP1_OUT and SPI/SAI signals."+        "description": "5 V-tolerant high-speed I/O (FT_h); alternate functions include TIM1_CH3N, DFSDM1_DATIN5, SPI4_SCK, SAI2_SCK_B, FMC_D9, COMP1_OUT and LCD_B4."       },       {         "number": "43",         "name": "PE13",         "type": "bidirectional",-        "description": "GPIO port E pin 13, 5V tolerant I/O with high-speed low-voltage option, supports COMP2_OUT and SPI signals."+        "description": "5 V-tolerant high-speed I/O (FT_h); alternate functions include TIM1_CH3, DFSDM1_CKIN5, SPI4_MISO, SAI2_FS_B, FMC_D10, COMP2_OUT and LCD_DE."       },       {         "number": "44",         "name": "PE14",         "type": "bidirectional",-        "description": "GPIO port E pin 14, 5V tolerant I/O with high-speed low-voltage option, supports timer and SPI signals."+        "description": "5 V-tolerant high-speed I/O (FT_h); alternate functions include TIM1_CH4, SPI4_MOSI, SAI2_MCLK_B, FMC_D11 and LCD_CLK."       },       {         "number": "45",         "name": "PE15",         "type": "bidirectional",-        "description": "GPIO port E pin 15, 5V tolerant I/O with high-speed low-voltage option, supports TIM1_BKIN and LCD/FMC signals."+        "description": "5 V-tolerant high-speed I/O (FT_h); alternate functions include TIM1_BKIN, FMC_D12, TIM1_BKIN_COMP12 and LCD_R7."       },       {         "number": "46",         "name": "PB10",         "type": "bidirectional",-        "description": "GPIO port B pin 10, 5V tolerant I/O with FM+ option, supports I2C2_SCL, timer, USART3 and QUADSPI signals."+        "description": "5 V-tolerant I/O with FM+ option (FT_f); alternate functions include TIM2_CH3, HRTIM_SCOUT, I2C2_SCL, SPI2_SCK/I2S2_CK, USART3_TX, OTG_HS_ULPI_D3 and ETH_MII_RX_ER."       },       {         "number": "47",         "name": "PB11",         "type": "bidirectional",-        "description": "GPIO port B pin 11, 5V tolerant I/O with FM+ option, supports I2C2_SDA, timer, USART3 and QUADSPI signals."+        "description": "5 V-tolerant I/O with FM+ option (FT_f); alternate functions include TIM2_CH4, HRTIM_SCIN, LPTIM2_ETR, I2C2_SDA, USART3_RX, OTG_HS_ULPI_D4 and ETH_MII_TX_EN."       },       {         "number": "48",         "name": "VCAP",-        "type": "power_in",-        "description": "Internal voltage regulator stabilization capacitor pin, requires 2.2µF external capacitor with <100mΩ ESR."+        "type": "power_out",+        "description": "Output of the main regulator; connect a 2.2 µF external capacitor (±20%, ESR < 100 mΩ) to this pin, as specified in Table 25."       },       {         "number": "49",         "name": "VSS",         "type": "power_in",-        "description": "Ground return path for digital circuits."+        "description": "Ground pin; all VSS pins must be connected to the external ground."       },       {         "number": "50",         "name": "VDD",         "type": "power_in",-        "description": "Main power supply voltage input, 1.62 to 3.6V, requires 100nF decoupling capacitor."+        "description": "Standard operating supply for I/Os and digital logic, 1.62 V to 3.6 V."       },       {         "number": "51",         "name": "PB12",         "type": "bidirectional",-        "description": "GPIO port B pin 12, 5V tolerant USB I/O, supports I2C2_SMBA, SPI2, timer and FDCAN signals."+        "description": "5 V-tolerant I/O with USB option (FT_u, supplied by VDD33USB); alternate functions include TIM1_BKIN, I2C2_SMBA, SPI2_NSS/I2S2_WS, USART3_CK, FDCAN2_RX, OTG_HS_ULPI_D5 and OTG_HS_ID."       },       {         "number": "52",         "name": "PB13",         "type": "bidirectional",-        "description": "GPIO port B pin 13, 5V tolerant USB I/O, supports SPI2, timer, FDCAN signals and OTG_HS_VBUS."+        "description": "5 V-tolerant I/O with USB option (FT_u); OTG_HS_VBUS additional function; alternate functions include TIM1_CH1N, LPTIM2_OUT, SPI2_SCK/I2S2_CK, USART3_CTS, FDCAN2_TX and OTG_HS_ULPI_D6."       },       {         "number": "53",         "name": "PB14",         "type": "bidirectional",-        "description": "GPIO port B pin 14, 5V tolerant USB I/O, supports USART1, SPI2, timer and SDMMC2 signals."+        "description": "5 V-tolerant I/O with USB option (FT_u); alternate functions include TIM1_CH2N, TIM12_CH1, USART1_TX, SPI2_MISO/I2S2_SDI, USART3_RTS, UART4_RTS, SDMMC2_D0 and OTG_HS_DM."       },       {         "number": "54",         "name": "PB15",         "type": "bidirectional",-        "description": "GPIO port B pin 15, 5V tolerant USB I/O, supports USART1, SPI2, timer and SDMMC2 signals."+        "description": "5 V-tolerant I/O with USB option (FT_u); alternate functions include RTC_REFIN, TIM1_CH3N, TIM12_CH2, USART1_RX, SPI2_MOSI/I2S2_SDO, UART4_CTS, SDMMC2_D1 and OTG_HS_DP."       },       {         "number": "55",         "name": "PD8",         "type": "bidirectional",-        "description": "GPIO port D pin 8, 5V tolerant I/O with high-speed low-voltage option, supports USART3, DFSDM and SPDIFRX signals."+        "description": "5 V-tolerant high-speed I/O (FT_h); alternate functions include DFSDM1_CKIN3, SAI3_SCK_B, USART3_TX, SPDIFRX1_IN2 and FMC_D13."       },       {         "number": "56",         "name": "PD9",         "type": "bidirectional",-        "description": "GPIO port D pin 9, 5V tolerant I/O with high-speed low-voltage option, supports USART3 and DFSDM signals."+        "description": "5 V-tolerant high-speed I/O (FT_h); alternate functions include DFSDM1_DATIN3, SAI3_SD_B, USART3_RX, FDCAN2_RXFD_MODE and FMC_D14."       },       {         "number": "57",         "name": "PD10",         "type": "bidirectional",-        "description": "GPIO port D pin 10, 5V tolerant I/O with high-speed low-voltage option, supports USART3 and SAI signals."+        "description": "5 V-tolerant high-speed I/O (FT_h); alternate functions include DFSDM1_CKOUT, SAI3_FS_B, USART3_CK, FDCAN2_TXFD_MODE, FMC_D15 and LCD_B3."       },       {         "number": "58",         "name": "PD11",         "type": "bidirectional",-        "description": "GPIO port D pin 11, 5V tolerant I/O with high-speed low-voltage option, supports I2C4_SMBA, USART3 and QUADSPI signals."+        "description": "5 V-tolerant high-speed I/O (FT_h); alternate functions include LPTIM2_IN2, I2C4_SMBA, USART3_CTS, QUADSPI_BK1_IO0, SAI2_SD_A and FMC_A16."       },       {         "number": "59",         "name": "PD12",         "type": "bidirectional",-        "description": "GPIO port D pin 12, 5V tolerant I/O with FM+ option, supports I2C4_SCL, timer, USART3 and QUADSPI signals."+        "description": "5 V-tolerant high-speed I/O with FM+ option (FT_fh); alternate functions include LPTIM1_IN1, TIM4_CH1, I2C4_SCL, USART3_RTS, QUADSPI_BK1_IO1 and FMC_A17."       },       {         "number": "60",         "name": "PD13",         "type": "bidirectional",-        "description": "GPIO port D pin 13, 5V tolerant I/O with FM+ option, supports I2C4_SDA and QUADSPI signals."+        "description": "5 V-tolerant high-speed I/O with FM+ option (FT_fh); alternate functions include LPTIM1_OUT, TIM4_CH2, I2C4_SDA, QUADSPI_BK1_IO3 and FMC_A18."       },       {         "number": "61",         "name": "PD14",         "type": "bidirectional",-        "description": "GPIO port D pin 14, 5V tolerant I/O with high-speed low-voltage option, supports timer, SAI and UART8 signals."+        "description": "5 V-tolerant high-speed I/O (FT_h); alternate functions include TIM4_CH3, SAI3_MCLK_B, UART8_CTS and FMC_D0."       },       {         "number": "62",         "name": "PD15",         "type": "bidirectional",-        "description": "GPIO port D pin 15, 5V tolerant I/O with high-speed low-voltage option, supports timer, SAI and UART8 signals."+        "description": "5 V-tolerant high-speed I/O (FT_h); alternate functions include TIM4_CH4, SAI3_MCLK_A, UART8_RTS/UART8_DE and FMC_D1."       },       {         "number": "63",         "name": "PC6",         "type": "bidirectional",-        "description": "GPIO port C pin 6, 5V tolerant I/O with high-speed low-voltage option, supports USART6, timer, SDMMC and LCD signals."+        "description": "5 V-tolerant high-speed I/O (FT_h); alternate functions include HRTIM_CHA1, TIM3_CH1, TIM8_CH1, I2S2_MCK, USART6_TX, FMC_NWAIT and DCMI_D0; SWPMI_IO additional function."       },       {         "number": "64",         "name": "PC7",         "type": "bidirectional",-        "description": "GPIO port C pin 7, 5V tolerant I/O with high-speed low-voltage option, supports USART6, timer and SDMMC signals."+        "description": "5 V-tolerant high-speed I/O (FT_h); alternate functions include TRGIO, HRTIM_CHA2, TIM3_CH2, TIM8_CH2, I2S3_MCK, USART6_RX, FMC_NE1 and DCMI_D1."       },       {         "number": "65",         "name": "PC8",         "type": "bidirectional",-        "description": "GPIO port C pin 8, 5V tolerant I/O with high-speed low-voltage option, supports USART6, timer and SDMMC signals."+        "description": "5 V-tolerant high-speed I/O (FT_h); alternate functions include TRACED1, HRTIM_CHB1, TIM3_CH3, TIM8_CH3, USART6_CK, FMC_NE2/FMC_NCE, SWPMI_RX and DCMI_D2."       },       {         "number": "66",         "name": "PC9",         "type": "bidirectional",-        "description": "GPIO port C pin 9, 5V tolerant I/O with FM+ option, supports MCO2, timer, I2C3 and SDMMC signals."+        "description": "5 V-tolerant I/O with FM+ option (FT_fh); alternate functions include MCO2, TIM3_CH4, TIM8_CH4, I2C3_SDA, UART5_CTS, QUADSPI_BK1_IO0 and SDMMC1_D1."       },       {         "number": "67",         "name": "PA8",         "type": "bidirectional",-        "description": "GPIO port A pin 8, 5V tolerant I/O with FM+ option, supports MCO1, timer, I2C3 and UART signals."+        "description": "5 V-tolerant I/O with FM+ option and analog option (FT_fha); alternate functions include MCO1, TIM1_CH1, HRTIM_CHB2, I2C3_SCL, USART1_CK, OTG_FS_SOF and UART7_RX."       },       {         "number": "68",         "name": "PA9",         "type": "bidirectional",-        "description": "GPIO port A pin 9, 5V tolerant USB I/O, supports LPUART1, USART1, SPI2 and OTG_FS_VBUS."+        "description": "5 V-tolerant I/O with USB option (FT_u); OTG_FS_VBUS additional function; alternate functions include TIM1_CH2, HRTIM_CHC1, LPUART1_TX, I2C3_SMBA, SPI2_SCK/I2S2_CK, USART1_TX and DCMI_D0."       },       {         "number": "69",         "name": "PA10",         "type": "bidirectional",-        "description": "GPIO port A pin 10, 5V tolerant USB I/O, supports LPUART1, USART1 and FDCAN signals."+        "description": "5 V-tolerant I/O with USB option (FT_u); alternate functions include TIM1_CH3, HRTIM_CHC2, LPUART1_RX, USART1_RX, OTG_FS_ID, MDIOS_MDIO and DCMI_D1."       },       {         "number": "70",         "name": "PA11",         "type": "bidirectional",-        "description": "GPIO port A pin 11, 5V tolerant USB I/O, supports LPUART1, USART1, UART4 and OTG_FS_DM."+        "description": "5 V-tolerant I/O with USB option (FT_u); alternate functions include TIM1_CH4, HRTIM_CHD1, LPUART1_CTS, SPI2_NSS/I2S2_WS, UART4_RX, USART1_CTS, FDCAN1_RX and OTG_FS_DM."       },       {         "number": "71",         "name": "PA12",         "type": "bidirectional",-        "description": "GPIO port A pin 12, 5V tolerant USB I/O, supports LPUART1, USART1, UART4 and OTG_FS_DP."+        "description": "5 V-tolerant I/O with USB option (FT_u); alternate functions include TIM1_ETR, HRTIM_CHD2, LPUART1_RTS/LPUART1_DE, SPI2_SCK/I2S2_CK, UART4_TX, USART1_RTS/USART1_DE, FDCAN1_TX and OTG_FS_DP."       },       {         "number": "72",         "name": "PA13",         "type": "bidirectional",-        "description": "GPIO port A pin 13 / JTAG test mode select, 5V tolerant I/O, supports JTMS-SWDIO debug interface."+        "description": "5 V-tolerant I/O (FT); default function JTMS-SWDIO (SWD debug data)."       },       {         "number": "73",         "name": "VCAP",-        "type": "power_in",-        "description": "Internal voltage regulator stabilization capacitor pin, requires 2.2µF external capacitor with <100mΩ ESR."+        "type": "power_out",+        "description": "Output of the main regulator; connect a 2.2 µF external capacitor (±20%, ESR < 100 mΩ) to this pin, as specified in Table 25."       },       {         "number": "74",         "name": "VSS",         "type": "power_in",-        "description": "Ground return path for digital circuits."+        "description": "Ground pin; all VSS pins must be connected to the external ground."       },       {         "number": "75",         "name": "VDD",         "type": "power_in",-        "description": "Main power supply voltage input, 1.62 to 3.6V, requires 100nF decoupling capacitor."+        "description": "Standard operating supply for I/Os and digital logic, 1.62 V to 3.6 V."       },       {         "number": "76",         "name": "PA14",         "type": "bidirectional",-        "description": "GPIO port A pin 14 / JTAG test clock, 5V tolerant I/O, supports JTCK-SWCLK debug interface."+        "description": "5 V-tolerant I/O (FT); default function JTCK-SWCLK (SWD clock)."       },       {         "number": "77",         "name": "PA15",         "type": "bidirectional",-        "description": "GPIO port A pin 15 / JTAG data input, 5V tolerant I/O, supports JTDI and multiple peripheral signals."+        "description": "5 V-tolerant I/O (FT); default function JTDI; alternate functions include TIM2_CH1/TIM2_ETR, HRTIM_FLT1, CEC, SPI1_NSS/I2S1_WS and UART4_RTS."       },       {         "number": "78",         "name": "PC10",         "type": "bidirectional",-        "description": "GPIO port C pin 10, 5V tolerant I/O with high-speed low-voltage option, supports USART3, UART4, SPI3 and QUADSPI signals."+        "description": "5 V-tolerant high-speed I/O (FT_ha); alternate functions include HRTIM_EEV1, DFSDM1_CKIN5, SPI3_SCK/I2S3_CK, USART3_TX, UART4_TX, QUADSPI_BK1_IO1, SDMMC1_D2 and DCMI_D8."       },       {         "number": "79",         "name": "PC11",         "type": "bidirectional",-        "description": "GPIO port C pin 11, 5V tolerant I/O with high-speed low-voltage option, supports USART3, UART4 and SPI3 signals."+        "description": "5 V-tolerant high-speed I/O (FT_h); alternate functions include HRTIM_FLT2, DFSDM1_DATIN5, SPI3_MISO/I2S3_SDI, USART3_RX, UART4_RX, QUADSPI_BK2_NCS, SDMMC1_D3 and DCMI_D4."       },       {         "number": "80",         "name": "PC12",         "type": "bidirectional",-        "description": "GPIO port C pin 12, 5V tolerant I/O with high-speed low-voltage option, supports USART3, UART5 and SPI3 signals."+        "description": "5 V-tolerant high-speed I/O (FT_h); alternate functions include TRACED3, HRTIM_EEV2, SPI3_MOSI/I2S3_SDO, USART3_CK, UART5_TX, SDMMC1_CK and DCMI_D9."       },       {         "number": "81",         "name": "PD0",         "type": "bidirectional",-        "description": "GPIO port D pin 0, 5V tolerant I/O with high-speed low-voltage option, supports UART4 and FDCAN signals."+        "description": "5 V-tolerant high-speed I/O (FT_h); alternate functions include DFSDM1_CKIN6, SAI3_SCK_A, UART4_RX, FDCAN1_RX and FMC_D2."       },       {         "number": "82",         "name": "PD1",         "type": "bidirectional",-        "description": "GPIO port D pin 1, 5V tolerant I/O with high-speed low-voltage option, supports UART4 and FDCAN signals."+        "description": "5 V-tolerant high-speed I/O (FT_h); alternate functions include DFSDM1_DATIN6, SAI3_SD_A, UART4_TX, FDCAN1_TX and FMC_D3."       },       {         "number": "83",         "name": "PD2",         "type": "bidirectional",-        "description": "GPIO port D pin 2, 5V tolerant I/O with high-speed low-voltage option, supports UART5, SDMMC1 and DCMI signals."+        "description": "5 V-tolerant high-speed I/O (FT_h); alternate functions include TRACED2, TIM3_ETR, UART5_RX, SDMMC1_CMD and DCMI_D11."       },       {         "number": "84",         "name": "PD3",         "type": "bidirectional",-        "description": "GPIO port D pin 3, 5V tolerant I/O with high-speed low-voltage option, supports USART2 and SPI2 signals."+        "description": "5 V-tolerant high-speed I/O (FT_h); alternate functions include DFSDM1_CKOUT, SPI2_SCK/I2S2_CK, USART2_CTS/USART2_NSS, FMC_CLK, DCMI_D5 and LCD_G7."       },       {         "number": "85",         "name": "PD4",         "type": "bidirectional",-        "description": "GPIO port D pin 4, 5V tolerant I/O with high-speed low-voltage option, supports USART2 and FDCAN signals."+        "description": "5 V-tolerant high-speed I/O (FT_h); alternate functions include HRTIM_FLT3, SAI3_FS_A, USART2_RTS/USART2_DE, FDCAN1_RXFD_MODE and FMC_NOE."       },       {         "number": "86",         "name": "PD5",         "type": "bidirectional",-        "description": "GPIO port D pin 5, 5V tolerant I/O with high-speed low-voltage option, supports USART2 and FDCAN signals."+        "description": "5 V-tolerant high-speed I/O (FT_h); alternate functions include HRTIM_EEV3, USART2_TX, FDCAN1_TXFD_MODE and FMC_NWE."       },       {         "number": "87",         "name": "PD6",         "type": "bidirectional",-        "description": "GPIO port D pin 6, 5V tolerant I/O with high-speed low-voltage option, supports USART2, SAI, SPI3 and SDMMC signals."+        "description": "5 V-tolerant high-speed I/O (FT_h); alternate functions include SAI1_D1, DFSDM1_DATIN1, SPI3_MOSI/I2S3_SDO, USART2_RX, FDCAN2_RXFD_MODE, SDMMC2_CK, FMC_NWAIT, DCMI_D10 and LCD_B2."       },       {         "number": "88",         "name": "PD7",         "type": "bidirectional",-        "description": "GPIO port D pin 7, 5V tolerant I/O with high-speed low-voltage option, supports USART2, SPI1 and SDMMC signals."+        "description": "5 V-tolerant high-speed I/O (FT_h); alternate functions include DFSDM1_DATIN4, SPI1_MOSI/I2S1_SDO, USART2_CK, SPDIFRX1_IN1, SDMMC2_CMD and FMC_NE1."       },       {         "number": "89",         "name": "PB3",         "type": "bidirectional",-        "description": "GPIO port B pin 3 / JTAG data output, 5V tolerant I/O, supports JTDO/TRACESWO debug interface and SPI/timer signals."+        "description": "5 V-tolerant I/O (FT); default function JTDO/TRACESWO; alternate functions include TIM2_CH2, HRTIM_FLT4, SPI1_SCK/I2S1_CK, SPI3_SCK/I2S3_CK, SDMMC2_D2 and UART7_RX."       },       {         "number": "90",         "name": "PB4",         "type": "bidirectional",-        "description": "GPIO port B pin 4 / JTAG test reset, 5V tolerant I/O, supports NJTRST debug and SPI/timer signals."+        "description": "5 V-tolerant I/O (FT); default function NJTRST; alternate functions include TIM16_BKIN, TIM3_CH1, HRTIM_EEV6, SPI1_MISO/I2S1_SDI, SPI3_MISO/I2S3_SDI, SDMMC2_D3 and UART7_TX."       },       {         "number": "91",         "name": "PB5",         "type": "bidirectional",-        "description": "GPIO port B pin 5, 5V tolerant I/O, supports I2C1_SMBA, SPI1 and FDCAN signals."+        "description": "5 V-tolerant I/O (FT); alternate functions include TIM17_BKIN, TIM3_CH2, HRTIM_EEV7, I2C1_SMBA, SPI1_MOSI/I2S1_SDO, FDCAN2_RX, OTG_HS_ULPI_D7, FMC_SDCKE1 and DCMI_D10."       },       {         "number": "92",         "name": "PB6",         "type": "bidirectional",-        "description": "GPIO port B pin 6, 5V tolerant I/O with FM+ option, supports I2C1_SCL, USART1 and FDCAN signals."+        "description": "5 V-tolerant I/O with FM+ option (FT_f); alternate functions include TIM16_CH1N, TIM4_CH1, I2C1_SCL, CEC, USART1_TX, LPUART1_TX, FDCAN2_TX, QUADSPI_BK1_NCS and FMC_SDNE1."       },       {         "number": "93",         "name": "PB7",         "type": "bidirectional",-        "description": "GPIO port B pin 7, 5V tolerant I/O with FM+ option, supports I2C1_SDA, USART1 and FDCAN signals."+        "description": "5 V-tolerant I/O with FM+ and analog option (FT_fa); PVD_IN additional function; alternate functions include TIM17_CH1N, TIM4_CH2, I2C1_SDA, USART1_RX, LPUART1_RX, FDCAN2_TXFD_MODE and FMC_NL."       },       {         "number": "94",         "name": "BOOT0",         "type": "input",-        "description": "Boot mode selection input pin, accepts 0 to 9V input, determines boot source at reset (flash or system memory)."+        "description": "Dedicated BOOT0 boot-mode input; input voltage limited to 9.0 V (VPP additional function)."       },       {         "number": "95",         "name": "PB8",         "type": "bidirectional",-        "description": "GPIO port B pin 8, 5V tolerant I/O with FM+ option, supports I2C1_SCL, timer, UART4 and FDCAN signals."+        "description": "5 V-tolerant high-speed I/O with FM+ option (FT_fh); alternate functions include TIM16_CH1, TIM4_CH3, DFSDM1_CKIN7, I2C1_SCL, SDMMC1_CKIN, FDCAN1_RX, ETH_MII_TXD3 and DCMI_D6."       },       {         "number": "96",         "name": "PB9",         "type": "bidirectional",-        "description": "GPIO port B pin 9, 5V tolerant I/O with FM+ option, supports I2C1_SDA, timer, UART4 and FDCAN signals."+        "description": "5 V-tolerant high-speed I/O with FM+ option (FT_fh); alternate functions include TIM17_CH1, TIM4_CH4, DFSDM1_DATIN7, I2C1_SDA, SPI2_NSS/I2S2_WS, SDMMC1_CDIR, FDCAN1_TX and DCMI_D7."       },       {         "number": "97",         "name": "PE0",         "type": "bidirectional",-        "description": "GPIO port E pin 0, 5V tolerant I/O with high-speed low-voltage option, supports LPTIM1/2, UART8 and FDCAN signals."+        "description": "5 V-tolerant high-speed I/O (FT_h); alternate functions include LPTIM1_ETR, TIM4_ETR, HRTIM_SCIN, UART8_RX, FDCAN1_RXFD_MODE, SAI2_MCLK_A, FMC_NBL0 and DCMI_D2."       },       {         "number": "98",         "name": "PE1",         "type": "bidirectional",-        "description": "GPIO port E pin 1, 5V tolerant I/O with high-speed low-voltage option, supports LPTIM1 and UART8 signals."+        "description": "5 V-tolerant high-speed I/O (FT_h); alternate functions include LPTIM1_IN2, HRTIM_SCOUT, UART8_TX, FDCAN1_TXFD_MODE, FMC_NBL1 and DCMI_D3."       },       {         "number": "99",         "name": "VSS",         "type": "power_in",-        "description": "Ground return path for digital circuits."+        "description": "Ground pin; all VSS pins must be connected to the external ground."       },       {         "number": "100",         "name": "VDD",         "type": "power_in",-        "description": "Main power supply voltage input, 1.62 to 3.6V, requires 100nF decoupling capacitor."+        "description": "Standard operating supply for I/Os and digital logic, 1.62 V to 3.6 V."       }     ],     "provenance": {-      "extractor": "extract_pins 0.2",+      "extractor": "extract_pins 0.3",       "factory_chain": {         "factory": "2.0.0",-        "extractor": "extract_pins 0.2",-        "primary_model": "claude-haiku-4-5-20251001",+        "extractor": "extract_pins 0.3",+        "primary_model": "claude-haiku-5-5",         "primary_mode": "text",-        "consensus_model": "claude-sonnet-5",+        "consensus_model": "claude-sonnet-5-5",         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: PC2 and PC3 pins have dual analog/digital configuration via internal analog switch controlled by SYS; VDDLDO pin not present on LQFP100 package - datasheet note 8 on page 88 indicates this pin is intern"+          "extractor flagged: Pin descriptions are condensed: the alternate-function and additional-function lists are abbreviated; The datasheet does not state per-pin electrical limits beyond the I/O structure classes (FT = 5 V to; VCAP pins (48, 73) are listed as supply pins (S) in Table 9; typed as power_out here because they ar"         ],         "pages_sent": 105,-        "cost_usd": 1.6726,-        "at": "2026-09-23T09:36:23"+        "cost_usd": 0.7513,+        "at": "2026-11-10T22:52:39"       },       "datasheet": {         "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588893876479909888",@@ -669,6 +682,94 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"+    },+    "models_3d": [+      {+        "file": "stm32h743vit6.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          16,+          16,+          1.5+        ],+        "zmin_mm": 0,+        "centre_offset_mm": 0,+        "footprint_binding": "identity",+        "sha256": "51720097260ffba41c3062f85f67623721102fa535901c47cb555a1f444feeb3",+        "checked": "2026-11-10",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "stm32h743vit6-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          16,+          16,+          1.5+        ],+        "zmin_mm": 0,+        "centre_offset_mm": 0,+        "footprint_binding": "identity",+        "sha256": "ac2017a7790f0bd18eae8c5356020531c0fc37366ce5b9d53b3ad5d875f66796",+        "checked": "2026-11-10",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ],+    "package_dims": {+      "package_code": "LQFP100",+      "source_page": 324,+      "D": {+        "nom_mm": 14,+        "range_mm": [+          13.8,+          14.2+        ]+      },+      "E1": {+        "nom_mm": 14,+        "range_mm": [+          13.8,+          14.2+        ]+      },+      "E": {+        "nom_mm": 16,+        "range_mm": [+          15.8,+          16.2+        ]+      },+      "e": {+        "nom_mm": 0.5,+        "range_mm": [+          null,+          null+        ]+      },+      "A": {+        "nom_mm": 1.6,+        "range_mm": [+          null,+          1.6+        ]+      },+      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",+      "model_check": {+        "file": "stm32h743vit6.step",+        "verdict": "PASS",+        "reasons": [+          "height and body within the datasheet's package drawing"+        ],+        "by": "factory/package_fit.py"+      }     }   },   "metadata": {@@ -711,10 +812,15 @@     "docs/hero.png",     "docs/stm32h743vit6-datasheet.pdf",     "viewers/symbol.html",-    "viewers/footprint.html"+    "viewers/footprint.html",+    "stm32h743vit6-hero.glb",+    "stm32h743vit6-hero.overlay.json",+    "stm32h743vit6-etched.glb"   ],   "visibility": {     "public": true   },-  "updated_at": "2026-09-25T08:52:01.906Z"+  "updated_at": "2026-09-25T08:52:01.906Z",+  "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-100(14x14). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.",+  "org": "adom" }\ No newline at end of file
stm32h743vit6-etched.glb
⋯ 1 unchanged line ⋯
stm32h743vit6-hero.glbadded
⋯ 1 unchanged line ⋯
stm32h743vit6-hero.overlay.jsonadded+2284
@@ -0,0 +1,2284 @@+{+  "spec": "adom-hero 1.4",+  "mpn": "STM32H743VIT6",+  "kind": "component + footprint reference art",+  "board_use": false,+  "plane_z_mm": -0.02,+  "units": "metre",+  "upAxis": "Z",+  "layers": {+    "pad_outlines": {+      "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+      "rgba": [+        0.0,+        0.902,+        0.863,+        0.5+      ],+      "pads": 100,+      "span_mm": 16.95,+      "dash_mm": 0.4238,+      "gap_mm": 0.2542,+      "pad_stroke_mm": 0.09+    },+    "silkscreen": {+      "material": "Silkscreen reference lines - 30 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.3+      ],+      "footprint_items": 9,+      "pin1": {+        "source": "footprint silkscreen",+        "pad": "1"+      }+    },+    "signal_names": {+      "material": "Signal names - 50 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.5+      ],+      "font": "DejaVu Sans Mono",+      "labels": 100,+      "sides": "top + mirrored underside (single-sided)",+      "fallback_to_pad_number": 0+    }+  },+  "align": {+    "ok": true,+    "centre_offset_mm": 0.0,+    "tolerance_mm": 1.356,+    "orientation_flipped": false,+    "contacts_bbox_mm": [+      -8.0,+      8.0,+      -8.0,+      8.0+    ],+    "pads_bbox_mm": [+      -8.475,+      8.475,+      -8.475,+      8.475+    ],+    "seating_z_mm": -0.0+  },+  "sources": {+    "glb": "stm32h743vit6-etched.glb",+    "glb_sha256": "f8dc80cb53b528d815bdbcd66acf28cfd3724941de77e2c3407f924c2f4e1fc5",+    "footprint": "stm32h743vit6.kicad_mod",+    "footprint_sha256": "983eaf67626d2fe2566a4758bbf3f3ae02731fd07e16a9ae43ec0737af60043c",+    "pins": "page.json component.pins",+    "pins_sha256": "b38f4eb12da21e1209c998110357d294a247d98a8d30736884a1dd0b7580f09b"+  },+  "generator": "adom-wiki 1.8.18 (component_hero)",+  "labels": [+    {+      "pad": "1",+      "text": "PE2",+      "x": -8.575,+      "y": -6.0,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "2",+      "text": "PE3",+      "x": -8.575,+      "y": -5.5,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "3",+      "text": "PE4",+      "x": -8.575,+      "y": -5.0,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "4",+      "text": "PE5",+      "x": -8.575,+      "y": -4.5,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "5",+      "text": "PE6",+      "x": -8.575,+      "y": -4.0,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "6",+      "text": "VBAT",+      "x": -8.575,+      "y": -3.5,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "7",+      "text": "PC13",+      "x": -8.575,+      "y": -3.0,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "8",+      "text": "PC14-OSC32_IN",+      "x": -8.575,+      "y": -2.5,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "9",+      "text": "PC15-OSC32_OUT",+      "x": -8.575,+      "y": -2.0,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "10",+      "text": "VSS",+      "x": -8.575,+      "y": -1.5,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "11",+      "text": "VDD",+      "x": -8.575,+      "y": -1.0,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "12",+      "text": "PH0-OSC_IN",+      "x": -8.575,+      "y": -0.5,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "13",+      "text": "PH1-OSC_OUT",+      "x": -8.575,+      "y": 0.0,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "14",+      "text": "NRST",+      "x": -8.575,+      "y": 0.5,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "15",+      "text": "PC0",+      "x": -8.575,+      "y": 1.0,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "16",+      "text": "PC1",+      "x": -8.575,+      "y": 1.5,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "17",+      "text": "PC2_C",+      "x": -8.575,+      "y": 2.0,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "18",+      "text": "PC3_C",+      "x": -8.575,+      "y": 2.5,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "19",+      "text": "VSSA",+      "x": -8.575,+      "y": 3.0,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "20",+      "text": "VREF+",+      "x": -8.575,+      "y": 3.5,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "21",+      "text": "VDDA",+      "x": -8.575,+      "y": 4.0,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "22",+      "text": "PA0",+      "x": -8.575,+      "y": 4.5,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "23",+      "text": "PA1",+      "x": -8.575,+      "y": 5.0,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "24",+      "text": "PA2",+      "x": -8.575,+      "y": 5.5,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "25",+      "text": "PA3",+      "x": -8.575,+      "y": 6.0,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "26",+      "text": "VSS",+      "x": -6.0,+      "y": 8.575,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "27",+      "text": "VDD",+      "x": -5.5,+      "y": 8.575,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "28",+      "text": "PA4",+      "x": -5.0,+      "y": 8.575,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "29",+      "text": "PA5",+      "x": -4.5,+      "y": 8.575,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "30",+      "text": "PA6",+      "x": -4.0,+      "y": 8.575,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "31",+      "text": "PA7",+      "x": -3.5,+      "y": 8.575,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "32",+      "text": "PC4",+      "x": -3.0,+      "y": 8.575,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "33",+      "text": "PC5",+      "x": -2.5,+      "y": 8.575,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "34",+      "text": "PB0",+      "x": -2.0,+      "y": 8.575,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "35",+      "text": "PB1",+      "x": -1.5,+      "y": 8.575,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "36",+      "text": "PB2",+      "x": -1.0,+      "y": 8.575,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "37",+      "text": "PE7",+      "x": -0.5,+      "y": 8.575,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "38",+      "text": "PE8",+      "x": 0.0,+      "y": 8.575,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "39",+      "text": "PE9",+      "x": 0.5,+      "y": 8.575,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "40",+      "text": "PE10",+      "x": 1.0,+      "y": 8.575,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "41",+      "text": "PE11",+      "x": 1.5,+      "y": 8.575,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "42",+      "text": "PE12",+      "x": 2.0,+      "y": 8.575,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "43",+      "text": "PE13",+      "x": 2.5,+      "y": 8.575,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "44",+      "text": "PE14",+      "x": 3.0,+      "y": 8.575,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "45",+      "text": "PE15",+      "x": 3.5,+      "y": 8.575,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "46",+      "text": "PB10",+      "x": 4.0,+      "y": 8.575,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "47",+      "text": "PB11",+      "x": 4.5,+      "y": 8.575,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "48",+      "text": "VCAP",+      "x": 5.0,+      "y": 8.575,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "49",+      "text": "VSS",+      "x": 5.5,+      "y": 8.575,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "50",+      "text": "VDD",+      "x": 6.0,+      "y": 8.575,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "51",+      "text": "PB12",+      "x": 8.575,+      "y": 6.0,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "52",+      "text": "PB13",+      "x": 8.575,+      "y": 5.5,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "53",+      "text": "PB14",+      "x": 8.575,+      "y": 5.0,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "54",+      "text": "PB15",+      "x": 8.575,+      "y": 4.5,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "55",+      "text": "PD8",+      "x": 8.575,+      "y": 4.0,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "56",+      "text": "PD9",+      "x": 8.575,+      "y": 3.5,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "57",+      "text": "PD10",+      "x": 8.575,+      "y": 3.0,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "58",+      "text": "PD11",+      "x": 8.575,+      "y": 2.5,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "59",+      "text": "PD12",+      "x": 8.575,+      "y": 2.0,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "60",+      "text": "PD13",+      "x": 8.575,+      "y": 1.5,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "61",+      "text": "PD14",+      "x": 8.575,+      "y": 1.0,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "62",+      "text": "PD15",+      "x": 8.575,+      "y": 0.5,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "63",+      "text": "PC6",+      "x": 8.575,+      "y": 0.0,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "64",+      "text": "PC7",+      "x": 8.575,+      "y": -0.5,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "65",+      "text": "PC8",+      "x": 8.575,+      "y": -1.0,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "66",+      "text": "PC9",+      "x": 8.575,+      "y": -1.5,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "67",+      "text": "PA8",+      "x": 8.575,+      "y": -2.0,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "68",+      "text": "PA9",+      "x": 8.575,+      "y": -2.5,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "69",+      "text": "PA10",+      "x": 8.575,+      "y": -3.0,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "70",+      "text": "PA11",+      "x": 8.575,+      "y": -3.5,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "71",+      "text": "PA12",+      "x": 8.575,+      "y": -4.0,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "72",+      "text": "PA13",+      "x": 8.575,+      "y": -4.5,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "73",+      "text": "VCAP",+      "x": 8.575,+      "y": -5.0,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "74",+      "text": "VSS",+      "x": 8.575,+      "y": -5.5,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "75",+      "text": "VDD",+      "x": 8.575,+      "y": -6.0,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "76",+      "text": "PA14",+      "x": 6.0,+      "y": -8.575,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "77",+      "text": "PA15",+      "x": 5.5,+      "y": -8.575,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "78",+      "text": "PC10",+      "x": 5.0,+      "y": -8.575,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "79",+      "text": "PC11",+      "x": 4.5,+      "y": -8.575,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "80",+      "text": "PC12",+      "x": 4.0,+      "y": -8.575,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "81",+      "text": "PD0",+      "x": 3.5,+      "y": -8.575,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "82",+      "text": "PD1",+      "x": 3.0,+      "y": -8.575,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "83",+      "text": "PD2",+      "x": 2.5,+      "y": -8.575,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "84",+      "text": "PD3",+      "x": 2.0,+      "y": -8.575,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "85",+      "text": "PD4",+      "x": 1.5,+      "y": -8.575,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "86",+      "text": "PD5",+      "x": 1.0,+      "y": -8.575,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "87",+      "text": "PD6",+      "x": 0.5,+      "y": -8.575,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "88",+      "text": "PD7",+      "x": 0.0,+      "y": -8.575,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "89",+      "text": "PB3",+      "x": -0.5,+      "y": -8.575,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "90",+      "text": "PB4",+      "x": -1.0,+      "y": -8.575,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "91",+      "text": "PB5",+      "x": -1.5,+      "y": -8.575,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "92",+      "text": "PB6",+      "x": -2.0,+      "y": -8.575,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "93",+      "text": "PB7",+      "x": -2.5,+      "y": -8.575,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "94",+      "text": "BOOT0",+      "x": -3.0,+      "y": -8.575,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "95",+      "text": "PB8",+      "x": -3.5,+      "y": -8.575,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "96",+      "text": "PB9",+      "x": -4.0,+      "y": -8.575,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "97",+      "text": "PE0",+      "x": -4.5,+      "y": -8.575,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "98",+      "text": "PE1",+      "x": -5.0,+      "y": -8.575,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "99",+      "text": "VSS",+      "x": -5.5,+      "y": -8.575,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "100",+      "text": "VDD",+      "x": -6.0,+      "y": -8.575,+      "align": "left",+      "vertical": true,+      "h": 0.25+    }+  ],+  "pads": [+    {+      "number": "1",+      "shape": "roundrect",+      "center_mm": [+        -7.675,+        -6.0+      ],+      "size_mm": [+        1.6,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "2",+      "shape": "roundrect",+      "center_mm": [+        -7.675,+        -5.5+      ],+      "size_mm": [+        1.6,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "3",+      "shape": "roundrect",+      "center_mm": [+        -7.675,+        -5.0+      ],+      "size_mm": [+        1.6,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "4",+      "shape": "roundrect",+      "center_mm": [+        -7.675,+        -4.5+      ],+      "size_mm": [+        1.6,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "5",+      "shape": "roundrect",+      "center_mm": [+        -7.675,+        -4.0+      ],+      "size_mm": [+        1.6,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "6",+      "shape": "roundrect",+      "center_mm": [+        -7.675,+        -3.5+      ],+      "size_mm": [+        1.6,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "7",+      "shape": "roundrect",+      "center_mm": [+        -7.675,+        -3.0+      ],+      "size_mm": [+        1.6,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "8",+      "shape": "roundrect",+      "center_mm": [+        -7.675,+        -2.5+      ],+      "size_mm": [+        1.6,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "9",+      "shape": "roundrect",+      "center_mm": [+        -7.675,+        -2.0+      ],+      "size_mm": [+        1.6,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "10",+      "shape": "roundrect",+      "center_mm": [+        -7.675,+        -1.5+      ],+      "size_mm": [+        1.6,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "11",+      "shape": "roundrect",+      "center_mm": [+        -7.675,+        -1.0+      ],+      "size_mm": [+        1.6,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "12",+      "shape": "roundrect",+      "center_mm": [+        -7.675,+        -0.5+      ],+      "size_mm": [+        1.6,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "13",+      "shape": "roundrect",+      "center_mm": [+        -7.675,+        0.0+      ],+      "size_mm": [+        1.6,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "14",+      "shape": "roundrect",+      "center_mm": [+        -7.675,+        0.5+      ],+      "size_mm": [+        1.6,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "15",+      "shape": "roundrect",+      "center_mm": [+        -7.675,+        1.0+      ],+      "size_mm": [+        1.6,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "16",+      "shape": "roundrect",+      "center_mm": [+        -7.675,+        1.5+      ],+      "size_mm": [+        1.6,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "17",+      "shape": "roundrect",+      "center_mm": [+        -7.675,+        2.0+      ],+      "size_mm": [+        1.6,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "18",+      "shape": "roundrect",+      "center_mm": [+        -7.675,+        2.5+      ],+      "size_mm": [+        1.6,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "19",+      "shape": "roundrect",+      "center_mm": [+        -7.675,+        3.0+      ],+      "size_mm": [+        1.6,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "20",+      "shape": "roundrect",+      "center_mm": [+        -7.675,+        3.5+      ],+      "size_mm": [+        1.6,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "21",+      "shape": "roundrect",+      "center_mm": [+        -7.675,+        4.0+      ],+      "size_mm": [+        1.6,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "22",+      "shape": "roundrect",+      "center_mm": [+        -7.675,+        4.5+      ],+      "size_mm": [+        1.6,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "23",+      "shape": "roundrect",+      "center_mm": [+        -7.675,+        5.0+      ],+      "size_mm": [+        1.6,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "24",+      "shape": "roundrect",+      "center_mm": [+        -7.675,+        5.5+      ],+      "size_mm": [+        1.6,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "25",+      "shape": "roundrect",+      "center_mm": [+        -7.675,+        6.0+      ],+      "size_mm": [+        1.6,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "26",+      "shape": "roundrect",+      "center_mm": [+        -6.0,+        7.675+      ],+      "size_mm": [+        0.3,+        1.6+      ],+      "rot": 0.0+    },+    {+      "number": "27",+      "shape": "roundrect",+      "center_mm": [+        -5.5,+        7.675+      ],+      "size_mm": [+        0.3,+        1.6+      ],+      "rot": 0.0+    },+    {+      "number": "28",+      "shape": "roundrect",+      "center_mm": [+        -5.0,+        7.675+      ],+      "size_mm": [+        0.3,+        1.6+      ],+      "rot": 0.0+    },+    {+      "number": "29",+      "shape": "roundrect",+      "center_mm": [+        -4.5,+        7.675+      ],+      "size_mm": [+        0.3,+        1.6+      ],+      "rot": 0.0+    },+    {+      "number": "30",+      "shape": "roundrect",+      "center_mm": [+        -4.0,+        7.675+      ],+      "size_mm": [+        0.3,+        1.6+      ],+      "rot": 0.0+    },+    {+      "number": "31",+      "shape": "roundrect",+      "center_mm": [+        -3.5,+        7.675+      ],+      "size_mm": [+        0.3,+        1.6+      ],+      "rot": 0.0+    },+    {+      "number": "32",+      "shape": "roundrect",+      "center_mm": [+        -3.0,+        7.675+      ],+      "size_mm": [+        0.3,+        1.6+      ],+      "rot": 0.0+    },+    {+      "number": "33",+      "shape": "roundrect",+      "center_mm": [+        -2.5,+        7.675+      ],+      "size_mm": [+        0.3,+        1.6+      ],+      "rot": 0.0+    },+    {+      "number": "34",+      "shape": "roundrect",+      "center_mm": [+        -2.0,+        7.675+      ],+      "size_mm": [+        0.3,+        1.6+      ],+      "rot": 0.0+    },+    {+      "number": "35",+      "shape": "roundrect",+      "center_mm": [+        -1.5,+        7.675+      ],+      "size_mm": [+        0.3,+        1.6+      ],+      "rot": 0.0+    },+    {+      "number": "36",+      "shape": "roundrect",+      "center_mm": [+        -1.0,+        7.675+      ],+      "size_mm": [+        0.3,+        1.6+      ],+      "rot": 0.0+    },+    {+      "number": "37",+      "shape": "roundrect",+      "center_mm": [+        -0.5,+        7.675+      ],+      "size_mm": [+        0.3,+        1.6+      ],+      "rot": 0.0+    },+    {+      "number": "38",+      "shape": "roundrect",+      "center_mm": [+        0.0,+        7.675+      ],+      "size_mm": [+        0.3,+        1.6+      ],+      "rot": 0.0+    },+    {+      "number": "39",+      "shape": "roundrect",+      "center_mm": [+        0.5,+        7.675+      ],+      "size_mm": [+        0.3,+        1.6+      ],+      "rot": 0.0+    },+    {+      "number": "40",+      "shape": "roundrect",+      "center_mm": [+        1.0,+        7.675+      ],+      "size_mm": [+        0.3,+        1.6+      ],+      "rot": 0.0+    },+    {+      "number": "41",+      "shape": "roundrect",+      "center_mm": [+        1.5,+        7.675+      ],+      "size_mm": [+        0.3,+        1.6+      ],+      "rot": 0.0+    },+    {+      "number": "42",+      "shape": "roundrect",+      "center_mm": [+        2.0,+        7.675+      ],+      "size_mm": [+        0.3,+        1.6+      ],+      "rot": 0.0+    },+    {+      "number": "43",+      "shape": "roundrect",+      "center_mm": [+        2.5,+        7.675+      ],+      "size_mm": [+        0.3,+        1.6+      ],+      "rot": 0.0+    },+    {+      "number": "44",+      "shape": "roundrect",+      "center_mm": [+        3.0,+        7.675+      ],+      "size_mm": [+        0.3,+        1.6+      ],+      "rot": 0.0+    },+    {+      "number": "45",+      "shape": "roundrect",+      "center_mm": [+        3.5,+        7.675+      ],+      "size_mm": [+        0.3,+        1.6+      ],+      "rot": 0.0+    },+    {+      "number": "46",+      "shape": "roundrect",+      "center_mm": [+        4.0,+        7.675+      ],+      "size_mm": [+        0.3,+        1.6+      ],+      "rot": 0.0+    },+    {+      "number": "47",+      "shape": "roundrect",+      "center_mm": [+        4.5,+        7.675+      ],+      "size_mm": [+        0.3,+        1.6+      ],+      "rot": 0.0+    },+    {+      "number": "48",+      "shape": "roundrect",+      "center_mm": [+        5.0,+        7.675+      ],+      "size_mm": [+        0.3,+        1.6+      ],+      "rot": 0.0+    },+    {+      "number": "49",+      "shape": "roundrect",+      "center_mm": [+        5.5,+        7.675+      ],+      "size_mm": [+        0.3,+        1.6+      ],+      "rot": 0.0+    },+    {+      "number": "50",+      "shape": "roundrect",+      "center_mm": [+        6.0,+        7.675+      ],+      "size_mm": [+        0.3,+        1.6+      ],+      "rot": 0.0+    },+    {+      "number": "51",+      "shape": "roundrect",+      "center_mm": [+        7.675,+        6.0+      ],+      "size_mm": [+        1.6,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "52",+      "shape": "roundrect",+      "center_mm": [+        7.675,+        5.5+      ],+      "size_mm": [+        1.6,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "53",+      "shape": "roundrect",+      "center_mm": [+        7.675,+        5.0+      ],+      "size_mm": [+        1.6,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "54",+      "shape": "roundrect",+      "center_mm": [+        7.675,+        4.5+      ],+      "size_mm": [+        1.6,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "55",+      "shape": "roundrect",+      "center_mm": [+        7.675,+        4.0+      ],+      "size_mm": [+        1.6,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "56",+      "shape": "roundrect",+      "center_mm": [+        7.675,+        3.5+      ],+      "size_mm": [+        1.6,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "57",+      "shape": "roundrect",+      "center_mm": [+        7.675,+        3.0+      ],+      "size_mm": [+        1.6,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "58",+      "shape": "roundrect",+      "center_mm": [+        7.675,+        2.5+      ],+      "size_mm": [+        1.6,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "59",+      "shape": "roundrect",+      "center_mm": [+        7.675,+        2.0+      ],+      "size_mm": [+        1.6,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "60",+      "shape": "roundrect",+      "center_mm": [+        7.675,+        1.5+      ],+      "size_mm": [+        1.6,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "61",+      "shape": "roundrect",+      "center_mm": [+        7.675,+        1.0+      ],+      "size_mm": [+        1.6,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "62",+      "shape": "roundrect",+      "center_mm": [+        7.675,+        0.5+      ],+      "size_mm": [+        1.6,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "63",+      "shape": "roundrect",+      "center_mm": [+        7.675,+        0.0+      ],+      "size_mm": [+        1.6,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "64",+      "shape": "roundrect",+      "center_mm": [+        7.675,+        -0.5+      ],+      "size_mm": [+        1.6,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "65",+      "shape": "roundrect",+      "center_mm": [+        7.675,+        -1.0+      ],+      "size_mm": [+        1.6,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "66",+      "shape": "roundrect",+      "center_mm": [+        7.675,+        -1.5+      ],+      "size_mm": [+        1.6,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "67",+      "shape": "roundrect",+      "center_mm": [+        7.675,+        -2.0+      ],+      "size_mm": [+        1.6,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "68",+      "shape": "roundrect",+      "center_mm": [+        7.675,+        -2.5+      ],+      "size_mm": [+        1.6,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "69",+      "shape": "roundrect",+      "center_mm": [+        7.675,+        -3.0+      ],+      "size_mm": [+        1.6,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "70",+      "shape": "roundrect",+      "center_mm": [+        7.675,+        -3.5+      ],+      "size_mm": [+        1.6,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "71",+      "shape": "roundrect",+      "center_mm": [+        7.675,+        -4.0+      ],+      "size_mm": [+        1.6,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "72",+      "shape": "roundrect",+      "center_mm": [+        7.675,+        -4.5+      ],+      "size_mm": [+        1.6,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "73",+      "shape": "roundrect",+      "center_mm": [+        7.675,+        -5.0+      ],+      "size_mm": [+        1.6,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "74",+      "shape": "roundrect",+      "center_mm": [+        7.675,+        -5.5+      ],+      "size_mm": [+        1.6,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "75",+      "shape": "roundrect",+      "center_mm": [+        7.675,+        -6.0+      ],+      "size_mm": [+        1.6,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "76",+      "shape": "roundrect",+      "center_mm": [+        6.0,+        -7.675+      ],+      "size_mm": [+        0.3,+        1.6+      ],+      "rot": 0.0+    },+    {+      "number": "77",+      "shape": "roundrect",+      "center_mm": [+        5.5,+        -7.675+      ],+      "size_mm": [+        0.3,+        1.6+      ],+      "rot": 0.0+    },+    {+      "number": "78",+      "shape": "roundrect",+      "center_mm": [+        5.0,+        -7.675+      ],+      "size_mm": [+        0.3,+        1.6+      ],+      "rot": 0.0+    },+    {+      "number": "79",+      "shape": "roundrect",+      "center_mm": [+        4.5,+        -7.675+      ],+      "size_mm": [+        0.3,+        1.6+      ],+      "rot": 0.0+    },+    {+      "number": "80",+      "shape": "roundrect",+      "center_mm": [+        4.0,+        -7.675+      ],+      "size_mm": [+        0.3,+        1.6+      ],+      "rot": 0.0+    },+    {+      "number": "81",+      "shape": "roundrect",+      "center_mm": [+        3.5,+        -7.675+      ],+      "size_mm": [+        0.3,+        1.6+      ],+      "rot": 0.0+    },+    {+      "number": "82",+      "shape": "roundrect",+      "center_mm": [+        3.0,+        -7.675+      ],+      "size_mm": [+        0.3,+        1.6+      ],+      "rot": 0.0+    },+    {+      "number": "83",+      "shape": "roundrect",+      "center_mm": [+        2.5,+        -7.675+      ],+      "size_mm": [+        0.3,+        1.6+      ],+      "rot": 0.0+    },+    {+      "number": "84",+      "shape": "roundrect",+      "center_mm": [+        2.0,+        -7.675+      ],+      "size_mm": [+        0.3,+        1.6+      ],+      "rot": 0.0+    },+    {+      "number": "85",+      "shape": "roundrect",+      "center_mm": [+        1.5,+        -7.675+      ],+      "size_mm": [+        0.3,+        1.6+      ],+      "rot": 0.0+    },+    {+      "number": "86",+      "shape": "roundrect",+      "center_mm": [+        1.0,+        -7.675+      ],+      "size_mm": [+        0.3,+        1.6+      ],+      "rot": 0.0+    },+    {+      "number": "87",+      "shape": "roundrect",+      "center_mm": [+        0.5,+        -7.675+      ],+      "size_mm": [+        0.3,+        1.6+      ],+      "rot": 0.0+    },+    {+      "number": "88",+      "shape": "roundrect",+      "center_mm": [+        0.0,+        -7.675+      ],+      "size_mm": [+        0.3,+        1.6+      ],+      "rot": 0.0+    },+    {+      "number": "89",+      "shape": "roundrect",+      "center_mm": [+        -0.5,+        -7.675+      ],+      "size_mm": [+        0.3,+        1.6+      ],+      "rot": 0.0+    },+    {+      "number": "90",+      "shape": "roundrect",+      "center_mm": [+        -1.0,+        -7.675+      ],+      "size_mm": [+        0.3,+        1.6+      ],+      "rot": 0.0+    },+    {+      "number": "91",+      "shape": "roundrect",+      "center_mm": [+        -1.5,+        -7.675+      ],+      "size_mm": [+        0.3,+        1.6+      ],+      "rot": 0.0+    },+    {+      "number": "92",+      "shape": "roundrect",+      "center_mm": [+        -2.0,+        -7.675+      ],+      "size_mm": [+        0.3,+        1.6+      ],+      "rot": 0.0+    },+    {+      "number": "93",+      "shape": "roundrect",+      "center_mm": [+        -2.5,+        -7.675+      ],+      "size_mm": [+        0.3,+        1.6+      ],+      "rot": 0.0+    },+    {+      "number": "94",+      "shape": "roundrect",+      "center_mm": [+        -3.0,+        -7.675+      ],+      "size_mm": [+        0.3,+        1.6+      ],+      "rot": 0.0+    },+    {+      "number": "95",+      "shape": "roundrect",+      "center_mm": [+        -3.5,+        -7.675+      ],+      "size_mm": [+        0.3,+        1.6+      ],+      "rot": 0.0+    },+    {+      "number": "96",+      "shape": "roundrect",+      "center_mm": [+        -4.0,+        -7.675+      ],+      "size_mm": [+        0.3,+        1.6+      ],+      "rot": 0.0+    },+    {+      "number": "97",+      "shape": "roundrect",+      "center_mm": [+        -4.5,+        -7.675+      ],+      "size_mm": [+        0.3,+        1.6+      ],+      "rot": 0.0+    },+    {+      "number": "98",+      "shape": "roundrect",+      "center_mm": [+        -5.0,+        -7.675+      ],+      "size_mm": [+        0.3,+        1.6+      ],+      "rot": 0.0+    },+    {+      "number": "99",+      "shape": "roundrect",+      "center_mm": [+        -5.5,+        -7.675+      ],+      "size_mm": [+        0.3,+        1.6+      ],+      "rot": 0.0+    },+    {+      "number": "100",+      "shape": "roundrect",+      "center_mm": [+        -6.0,+        -7.675+      ],+      "size_mm": [+        0.3,+        1.6+      ],+      "rot": 0.0+    }+  ]+}
stm32h743vit6.kicad_mod+6−180
@@ -122,186 +122,6 @@ 		(fill yes) 		(layer "F.SilkS") 	)-	(fp_line-		(start -8.73 -6.4)-		(end -7.25 -6.4)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-	)-	(fp_line-		(start -8.73 6.4)-		(end -8.73 -6.4)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-	)-	(fp_line-		(start -7.25 -7.25)-		(end -6.4 -7.25)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-	)-	(fp_line-		(start -7.25 -6.4)-		(end -7.25 -7.25)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-	)-	(fp_line-		(start -7.25 6.4)-		(end -8.73 6.4)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-	)-	(fp_line-		(start -7.25 7.25)-		(end -7.25 6.4)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-	)-	(fp_line-		(start -6.4 -8.73)-		(end 6.4 -8.73)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-	)-	(fp_line-		(start -6.4 -7.25)-		(end -6.4 -8.73)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-	)-	(fp_line-		(start -6.4 7.25)-		(end -7.25 7.25)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-	)-	(fp_line-		(start -6.4 8.73)-		(end -6.4 7.25)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-	)-	(fp_line-		(start 6.4 -8.73)-		(end 6.4 -7.25)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-	)-	(fp_line-		(start 6.4 -7.25)-		(end 7.25 -7.25)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-	)-	(fp_line-		(start 6.4 7.25)-		(end 6.4 8.73)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-	)-	(fp_line-		(start 6.4 8.73)-		(end -6.4 8.73)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-	)-	(fp_line-		(start 7.25 -7.25)-		(end 7.25 -6.4)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-	)-	(fp_line-		(start 7.25 -6.4)-		(end 8.73 -6.4)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-	)-	(fp_line-		(start 7.25 6.4)-		(end 7.25 7.25)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-	)-	(fp_line-		(start 7.25 7.25)-		(end 6.4 7.25)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-	)-	(fp_line-		(start 8.73 -6.4)-		(end 8.73 6.4)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-	)-	(fp_line-		(start 8.73 6.4)-		(end 7.25 6.4)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-	) 	(fp_poly 		(pts 			(xy -6 -7)@@ -939,4 +759,10 @@ 			(xyz 0 0 0) 		) 	)+	(fp_poly+		(pts (xy -8.73 -6.40) (xy -7.25 -6.40) (xy -7.25 -7.25) (xy -6.40 -7.25) (xy -6.40 -8.73) (xy 6.40 -8.73) (xy 6.40 -7.25) (xy 7.25 -7.25) (xy 7.25 -6.40) (xy 8.73 -6.40) (xy 8.73 6.40) (xy 7.25 6.40) (xy 7.25 7.25) (xy 6.40 7.25) (xy 6.40 8.73) (xy -6.40 8.73) (xy -6.40 7.25) (xy -7.25 7.25) (xy -7.25 6.40) (xy -8.73 6.40))+		(stroke (width 0.05) (type solid))+		(fill no)+		(layer "F.CrtYd")+	) )
stm32h743vit6.kicad_sym+4−4
@@ -72,11 +72,11 @@       (name "PC1" (effects (font (size 1.27 1.27))))       (number "16" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at -17.78 20.32 0) (length 5.08)+    (pin passive line (at -17.78 20.32 0) (length 5.08)       (name "PC2_C" (effects (font (size 1.27 1.27))))       (number "17" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at -17.78 17.78 0) (length 5.08)+    (pin passive line (at -17.78 17.78 0) (length 5.08)       (name "PC3_C" (effects (font (size 1.27 1.27))))       (number "18" (effects (font (size 1.27 1.27))))     )@@ -196,7 +196,7 @@       (name "PB11" (effects (font (size 1.27 1.27))))       (number "47" (effects (font (size 1.27 1.27))))     )-    (pin power_in line (at -17.78 -58.42 0) (length 5.08)+    (pin power_out line (at -17.78 -58.42 0) (length 5.08)       (name "VCAP" (effects (font (size 1.27 1.27))))       (number "48" (effects (font (size 1.27 1.27))))     )@@ -316,7 +316,7 @@       (name "VSS" (effects (font (size 1.27 1.27))))       (number "74" (effects (font (size 1.27 1.27))))     )-    (pin power_in line (at 17.78 -7.62 180) (length 5.08)+    (pin power_out line (at 17.78 -7.62 180) (length 5.08)       (name "VCAP" (effects (font (size 1.27 1.27))))       (number "73" (effects (font (size 1.27 1.27))))     )
stm32h743vit6.lbr+16−7
@@ -50,7 +50,7 @@ <layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/> </layers> <library>-<description></description>+<description>STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-100(14x14)</description> <packages> <package name="LQFP-100_14x14mm_P0.5mm">   <description>LQFP-100, 14 x 14 mm, 0.5 mm pitch</description>@@ -180,6 +180,7 @@ </packages> <symbols> <symbol name="STM32H743VIT6">+  <description>STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-100(14x14)</description>   <wire x1="-12.7" y1="63.5" x2="12.7" y2="63.5" width="0.254" layer="94"/>   <wire x1="12.7" y1="63.5" x2="12.7" y2="-66.04" width="0.254" layer="94"/>   <wire x1="12.7" y1="-66.04" x2="-12.7" y2="-66.04" width="0.254" layer="94"/>@@ -202,8 +203,8 @@   <pin name="NRST" x="-17.78" y="27.94" length="middle" direction="io"/>   <pin name="PC0" x="-17.78" y="25.4" length="middle" direction="io"/>   <pin name="PC1" x="-17.78" y="22.86" length="middle" direction="io"/>-  <pin name="PC2_C" x="-17.78" y="20.32" length="middle" direction="io"/>-  <pin name="PC3_C" x="-17.78" y="17.78" length="middle" direction="io"/>+  <pin name="PC2_C" x="-17.78" y="20.32" length="middle" direction="pas"/>+  <pin name="PC3_C" x="-17.78" y="17.78" length="middle" direction="pas"/>   <pin name="VSSA" x="-17.78" y="15.24" length="middle" direction="pwr"/>   <pin name="VREF+" x="-17.78" y="12.7" length="middle" direction="pwr"/>   <pin name="VDDA" x="-17.78" y="10.16" length="middle" direction="pwr"/>@@ -233,7 +234,7 @@   <pin name="PE15" x="-17.78" y="-50.8" length="middle" direction="io"/>   <pin name="PB10" x="-17.78" y="-53.34" length="middle" direction="io"/>   <pin name="PB11" x="-17.78" y="-55.88" length="middle" direction="io"/>-  <pin name="VCAP" x="-17.78" y="-58.42" length="middle" direction="pwr"/>+  <pin name="VCAP" x="-17.78" y="-58.42" length="middle" direction="out"/>   <pin name="VSS@3" x="-17.78" y="-60.96" length="middle" direction="pwr"/>   <pin name="VDD@3" x="-17.78" y="-63.5" length="middle" direction="pwr"/>   <pin name="VDD@4" x="17.78" y="60.96" length="middle" direction="pwr" rot="R180"/>@@ -263,7 +264,7 @@   <pin name="PA14" x="17.78" y="0" length="middle" direction="io" rot="R180"/>   <pin name="VDD@5" x="17.78" y="-2.54" length="middle" direction="pwr" rot="R180"/>   <pin name="VSS@5" x="17.78" y="-5.08" length="middle" direction="pwr" rot="R180"/>-  <pin name="VCAP@2" x="17.78" y="-7.62" length="middle" direction="pwr" rot="R180"/>+  <pin name="VCAP@2" x="17.78" y="-7.62" length="middle" direction="out" rot="R180"/>   <pin name="PA13" x="17.78" y="-10.16" length="middle" direction="io" rot="R180"/>   <pin name="PA12" x="17.78" y="-12.7" length="middle" direction="io" rot="R180"/>   <pin name="PA11" x="17.78" y="-15.24" length="middle" direction="io" rot="R180"/>@@ -290,7 +291,7 @@ </symbols> <devicesets> <deviceset name="STM32H743VIT6" prefix="U">-  <description></description>+  <description>STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-100(14x14)</description>   <gates>     <gate name="G$1" symbol="STM32H743VIT6" x="0" y="0"/>   </gates>@@ -398,7 +399,15 @@         <connect gate="G$1" pin="PB13" pad="52"/>         <connect gate="G$1" pin="PB12" pad="51"/>       </connects>-      <technologies><technology name=""/></technologies>+      <technologies>+        <technology name="">+          <attribute name="MPN" value="STM32H743VIT6" constant="no"/>+          <attribute name="MANUFACTURER" value="STMicroelectronics" constant="no"/>+          <attribute name="DATASHEET" value="https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588893876479909888" constant="no"/>+          <attribute name="ADOM_WIKI" value="https://wiki.adom.inc/adom/stm32h743vit6" constant="no"/>+          <attribute name="LCSC_PN" value="C114409" constant="no"/>+        </technology>+      </technologies>     </device>   </devices> </deviceset>