← Commit history
README.md+91−86
@@ -2,107 +2,112 @@  **STMicroelectronics** · Microcontrollers (MCU/MPU/SOC) · LQFP-64(10x10) -STM32G474RET6 from STMicroelectronics, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.+STM32G474RET6 from STMicroelectronics, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data). Symbol, footprint, and 3D from KiCad-official CAD.  ## Pinout  | Pin | Name | Type | Function | |---|---|---|---|-| 1 | VBAT | power_in | Backup supply for the RTC, LSE 32 kHz crystal, and backup registers (~1.55-3.6 V). Powered from a coin cell or dedicated backup rail; can be tied to VDD if the backup domain is not used. |-| 2 | PC13 | bidirectional | Reset-state general-purpose I/O (5 V tolerant FT). Additional functions include WKUP2, RTC_TAMP1, RTC_TS, RTC_OUT1; alternate functions include TIM1_BKIN, TIM1_CH1N, TIM8_CH4N, EVENTOUT. |-| 3 | PC14-OSC32_IN | bidirectional | GPIO PC14 by default (FT, 5 V tolerant); additional function is OSC32_IN input for the 32.768 kHz LSE crystal. |-| 4 | PC15-OSC32_OUT | bidirectional | GPIO PC15 by default (FT, 5 V tolerant); additional function is OSC32_OUT output for the 32.768 kHz LSE crystal. |-| 5 | PF0-OSC_IN | bidirectional | GPIO PF0 by default (FT_fa, 5 V tolerant, Fm+ and analog switch); additional function is OSC_IN input for the main HSE 4-48 MHz crystal, also ADC1_IN10. |-| 6 | PF1-OSC_OUT | bidirectional | GPIO PF1 by default (FT_a, 5 V tolerant, analog switch); additional function is OSC_OUT for the main HSE crystal, also ADC2_IN10, COMP3_INM. |-| 7 | PG10-NRST | bidirectional | Bidirectional device reset with internal weak pull-up (~40 kΩ). Drive low >20 µs to reset. Also usable as GPIO PG10 (FT) when NRST function disabled by option byte; alternate MCO/EVENTOUT. |-| 8 | PC0 | bidirectional | GPIO (FT_a, 5 V tolerant, analog switch). Additional: ADC12_IN6, COMP3_INM. Alternate: LPTIM1_IN1, TIM1_CH1, LPUART1_RX, EVENTOUT. |-| 9 | PC1 | bidirectional | GPIO (TT_a, 3.6 V tolerant, analog switch). Additional: ADC12_IN7, COMP3_INP. Alternate: LPTIM1_OUT, TIM1_CH2, LPUART1_TX, QUADSPI1_BK2_IO0, SAI1_SD_A, EVENTOUT. |-| 10 | PC2 | bidirectional | GPIO (FT_a, 5 V tolerant, analog switch). Additional: ADC12_IN8. Alternate: LPTIM1_IN2, TIM1_CH3, COMP3_OUT, TIM20_CH2, QUADSPI1_BK2_IO1, EVENTOUT. |-| 11 | PC3 | bidirectional | GPIO (TT_a, 3.6 V tolerant, analog switch). Additional: ADC12_IN9, OPAMP5_VINP. Alternate: LPTIM1_ETR, TIM1_CH4, SAI1_D1, TIM1_BKIN2, QUADSPI1_BK2_IO2, SAI1_SD_A, EVENTOUT. |-| 12 | PA0 | bidirectional | GPIO (TT_a, 3.6 V tolerant, analog switch). Additional: ADC12_IN1, COMP1_INM, COMP3_INP, RTC_TAMP2, WKUP1. Alternate: TIM2_CH1, TIM5_CH1, USART2_CTS, COMP1_OUT, TIM8_BKIN, TIM8_ETR, TIM2_ETR, EVENTOUT. |-| 13 | PA1 | bidirectional | GPIO (TT_a, 3.6 V tolerant, analog switch). Additional: ADC12_IN2, COMP1_INP, OPAMP1_VINP, OPAMP3_VINP, OPAMP6_VINM. Alternate: RTC_REFIN, TIM2_CH2, TIM5_CH2, USART2_RTS_DE, TIM15_CH1N, EVENTOUT. |-| 14 | PA2 | bidirectional | GPIO (FT_a, 5 V tolerant, analog switch). Additional: ADC1_IN3, COMP2_INM, OPAMP1_VOUT, WKUP4/LSCO. Alternate: TIM2_CH3, TIM5_CH3, USART2_TX, COMP2_OUT, TIM15_CH1, QUADSPI1_BK1_NCS, LPUART1_TX, UCPD1_FRSTX, EVENTOUT. |-| 15 | VSS | power_in | Digital ground reference (0 V). Bond to solid ground plane. |-| 16 | VDD | power_in | Digital supply, 1.71-3.6 V. Decouple locally with a 100 nF capacitor. |-| 17 | PA3 | bidirectional | GPIO (TT_a, 3.6 V tolerant, analog switch). Additional: ADC1_IN4, COMP2_INP, OPAMP1_VINM/OPAMP1_VINP, OPAMP5_VINM. Alternate: TIM2_CH4, TIM5_CH4, SAI1_CK1, USART2_RX, TIM15_CH2, QUADSPI1_CLK, LPUART1_RX, SAI1_MCLK_A, EVENTOUT. |-| 18 | PA4 | bidirectional | GPIO (TT_a, 3.6 V tolerant, analog switch). Additional: ADC2_IN17, DAC1_OUT1, COMP1_INM. Alternate: TIM3_CH2, SPI1_NSS, SPI3_NSS/I2S3_WS, USART2_CK, SAI1_FS_B, EVENTOUT. |-| 19 | PA5 | bidirectional | GPIO (TT_a, 3.6 V tolerant, analog switch). Additional: ADC2_IN13, DAC1_OUT2, COMP2_INM, OPAMP2_VINM. Alternate: TIM2_CH1, TIM2_ETR, SPI1_SCK, UCPD1_FRSTX, EVENTOUT. |-| 20 | PA6 | bidirectional | GPIO (TT_a, 3.6 V tolerant, analog switch). Additional: ADC2_IN3, DAC2_OUT1, OPAMP2_VOUT. Alternate: TIM16_CH1, TIM3_CH1, TIM8_BKIN, SPI1_MISO, TIM1_BKIN, COMP1_OUT, QUADSPI1_BK1_IO3, LPUART1_CTS, EVENTOUT. |-| 21 | PA7 | bidirectional | GPIO (TT_a, 3.6 V tolerant, analog switch). Additional: ADC2_IN4, COMP2_INP, OPAMP1_VINP, OPAMP2_VINP. Alternate: TIM17_CH1, TIM3_CH2, TIM8_CH1N, SPI1_MOSI, TIM1_CH1N, COMP2_OUT, QUADSPI1_BK1_IO2, UCPD1_FRSTX, EVENTOUT. |-| 22 | PC4 | bidirectional | GPIO (FT_fa, 5 V tolerant, Fm+ and analog switch). Additional: ADC2_IN5. Alternate: TIM1_ETR, I2C2_SCL, USART1_TX, QUADSPI1_BK2_IO3, EVENTOUT. |-| 23 | PC5 | bidirectional | GPIO (TT_a, 3.6 V tolerant, analog switch). Additional: ADC2_IN11, OPAMP1_VINM, OPAMP2_VINM, WKUP5. Alternate: TIM15_BKIN, SAI1_D3, TIM1_CH4N, USART1_RX, HRTIM1_EEV10, EVENTOUT. |-| 24 | PB0 | bidirectional | GPIO (TT_a, 3.6 V tolerant, analog switch). Additional: ADC3_IN12/ADC1_IN15, COMP4_INP, OPAMP2_VINP, OPAMP3_VINP. Alternate: TIM3_CH3, TIM8_CH2N, TIM1_CH2N, QUADSPI1_BK1_IO1, HRTIM1_FLT5, UCPD1_FRSTX, EVENTOUT. |-| 25 | PB1 | bidirectional | GPIO (TT_a, 3.6 V tolerant, analog switch). Additional: ADC3_IN1/ADC1_IN12, COMP1_INP, OPAMP3_VOUT, OPAMP6_VINM. Alternate: TIM3_CH4, TIM8_CH3N, TIM1_CH3N, COMP4_OUT, QUADSPI1_BK1_IO0, LPUART1_RTS_DE, HRTIM1_SCOUT, EVENTOUT. |-| 26 | PB2 | bidirectional | GPIO (TT_a, 3.6 V tolerant, analog switch). Additional: ADC2_IN12, COMP4_INM, OPAMP3_VINM. Alternate: RTC_OUT2, LPTIM1_OUT, TIM5_CH1, TIM20_CH1, I2C3_SMBA, QUADSPI1_BK2_IO1, HRTIM1_SCIN, EVENTOUT. |-| 27 | VSSA | power_in | Analog ground reference for ADCs, DACs, comparators, op-amps and VREFBUF. Tie to VSS with a clean star topology. |-| 28 | VREF+ | power_in | External positive reference voltage for the ADCs and DACs (or VREFBUF output when the internal buffer is enabled). Range typically 2.0 V to VDDA. Additional function: VREFBUF_OUT. |-| 29 | VDDA | power_in | Analog supply for ADCs, DACs, comparators, op-amps, VREFBUF and reset block, 1.62-3.6 V. Must be ≥ VDD and separately decoupled. |-| 30 | PB10 | bidirectional | GPIO (TT_a, 3.6 V tolerant, analog switch). Additional: COMP5_INM, OPAMP3_VINM, OPAMP4_VINM. Alternate: TIM2_CH3, USART3_TX, LPUART1_RX, QUADSPI1_CLK, TIM1_BKIN, HRTIM1_FLT3, SAI1_SCK_A, EVENTOUT. |-| 31 | VSS | power_in | Digital ground reference (0 V). |-| 32 | VDD | power_in | Digital supply, 1.71-3.6 V. Local 100 nF decoupling required. |-| 33 | PB11 | bidirectional | GPIO (TT_a, 3.6 V tolerant, analog switch). Additional: ADC12_IN14, COMP6_INP, OPAMP4_VINP, OPAMP6_VOUT. Alternate: TIM2_CH4, USART3_RX, LPUART1_TX, QUADSPI1_BK1_NCS, HRTIM1_FLT4, EVENTOUT. |-| 34 | PB12 | bidirectional | GPIO (TT_a, 3.6 V tolerant, analog switch). Additional: ADC4_IN3/ADC1_IN11, COMP7_INM, OPAMP4_VOUT, OPAMP6_VINP. Alternate: TIM5_ETR, I2C2_SMBA, SPI2_NSS/I2S2_WS, TIM1_BKIN, USART3_CK, LPUART1_RTS_DE, FDCAN2_RX, HRTIM1_CHC1, EVENTOUT. |-| 35 | PB13 | bidirectional | GPIO (TT_a, 3.6 V tolerant, analog switch). Additional: ADC3_IN5, COMP5_INP, OPAMP3_VINP, OPAMP4_VINP, OPAMP6_VINP. Alternate: SPI2_SCK/I2S2_CK, TIM1_CH1N, USART3_CTS, LPUART1_CTS, FDCAN2_TX, HRTIM1_CHC2, EVENTOUT. |-| 36 | PB14 | bidirectional | GPIO (TT_a, 3.6 V tolerant, analog switch). Additional: ADC4_IN4/ADC1_IN5, COMP7_INP, OPAMP2_VINP, OPAMP5_VINP. Alternate: TIM15_CH1, SPI2_MISO, TIM1_CH2N, USART3_RTS_DE, COMP4_OUT, HRTIM1_CHD1, EVENTOUT. |-| 37 | PB15 | bidirectional | GPIO (TT_a, 3.6 V tolerant, analog switch). Additional: ADC4_IN5/ADC2_IN15, COMP6_INM, OPAMP5_VINM. Alternate: RTC_REFIN, TIM15_CH2, TIM15_CH1N, COMP3_OUT, TIM1_CH3N, SPI2_MOSI/I2S2_SD, HRTIM1_CHD2, EVENTOUT. |-| 38 | PC6 | bidirectional | GPIO (FT_f, 5 V tolerant, Fm+). Alternate: TIM3_CH1, HRTIM1_EEV10, TIM8_CH1, I2S2_MCK, COMP6_OUT, I2C4_SCL, HRTIM1_CHF1, EVENTOUT. |-| 39 | PC7 | bidirectional | GPIO (FT_f, 5 V tolerant, Fm+). Alternate: TIM3_CH2, HRTIM1_FLT5, TIM8_CH2, I2S3_MCK, COMP5_OUT, I2C4_SDA, HRTIM1_CHF2, EVENTOUT. |-| 40 | PC8 | bidirectional | GPIO (FT_f, 5 V tolerant, Fm+). Alternate: TIM3_CH3, HRTIM1_CHE1, TIM8_CH3, TIM20_CH3, COMP7_OUT, I2C3_SCL, EVENTOUT. |-| 41 | PC9 | bidirectional | GPIO (FT_f, 5 V tolerant, Fm+). Alternate: TIM3_CH4, HRTIM1_CHE2, TIM8_CH4, I2SCKIN, TIM8_BKIN2, I2C3_SDA, EVENTOUT. |-| 42 | PA8 | bidirectional | GPIO (FT_a, 5 V tolerant, analog switch). Additional: ADC5_IN1, OPAMP5_VOUT. Alternate: MCO, I2C3_SCL, I2C2_SDA, I2S2_MCK, TIM1_CH1, USART1_CK, COMP7_OUT, TIM4_ETR, FDCAN3_RX, SAI1_CK2, HRTIM1_CHA1, SAI1_SCK_A, EVENTOUT. |-| 43 | PA9 | bidirectional | GPIO (FT_fda, 5 V tolerant, Fm+, USB-C dead-battery, analog switch). Additional: ADC5_IN2, UCPD1_DBCC1. Alternate: I2C3_SMBA, I2C2_SCL, I2S3_MCK, TIM1_CH2, USART1_TX, COMP5_OUT, TIM15_BKIN, TIM2_CH3, HRTIM1_CHA2, SAI1_FS_A, EVENTOUT. |-| 44 | PA10 | bidirectional | GPIO (FT_fda, 5 V tolerant, Fm+, USB-C dead-battery, analog switch). Additional: UCPD1_DBCC2. Alternate: TIM17_BKIN, USB_CRS_SYNC, I2C2_SMBA, SPI2_MISO, TIM1_CH3, USART1_RX, COMP6_OUT, TIM2_CH4, TIM8_BKIN, SAI1_D1, HRTIM1_CHB1, SAI1_SD_A, EVENTOUT. |-| 45 | PA11 | bidirectional | GPIO with USB function (FT_u, 5 V tolerant). Additional: USB_DM (D-). Alternate: SPI2_MOSI/I2S2_SD, TIM1_CH1N, USART1_CTS, COMP1_OUT, FDCAN1_RX, TIM4_CH1, TIM1_CH4, TIM1_BKIN2, HRTIM1_CHB2, EVENTOUT. |-| 46 | PA12 | bidirectional | GPIO with USB function (FT_u, 5 V tolerant). Additional: USB_DP (D+). Alternate: TIM16_CH1, I2SCKIN, TIM1_CH2N, USART1_RTS_DE, COMP2_OUT, FDCAN1_TX, TIM4_CH2, TIM1_ETR, HRTIM1_FLT1, EVENTOUT. |-| 47 | VSS | power_in | Digital ground reference (0 V). |-| 48 | VDD | power_in | Digital supply, 1.71-3.6 V. Local 100 nF decoupling required. |-| 49 | PA13 | bidirectional | SWDIO / JTMS in reset state (FT_f, 5 V tolerant, Fm+). Alternate: SWDIO-JTMS, TIM16_CH1N, I2C4_SCL, I2C1_SCL, IR_OUT, USART3_CTS, TIM4_CH3, SAI1_SD_B, EVENTOUT. |-| 50 | PA14 | bidirectional | SWCLK / JTCK in reset state (FT_f, 5 V tolerant, Fm+). Alternate: SWCLK-JTCK, LPTIM1_OUT, I2C4_SMBA, I2C1_SDA, TIM8_CH2, TIM1_BKIN, USART2_TX, SAI1_FS_B, EVENTOUT. |-| 51 | PA15 | bidirectional | JTDI in reset state (FT_f, 5 V tolerant, Fm+). Alternate: JTDI, TIM2_CH1, TIM8_CH1, I2C1_SCL, SPI1_NSS, SPI3_NSS/I2S3_WS, USART2_RX, UART4_RTS_DE, TIM1_BKIN, FDCAN3_TX, HRTIM1_FLT2, TIM2_ETR, EVENTOUT. |-| 52 | PC10 | bidirectional | GPIO (FT, 5 V tolerant). Alternate: TIM8_CH1N, UART4_TX, SPI3_SCK/I2S3_CK, USART3_TX, HRTIM1_FLT6, EVENTOUT. |-| 53 | PC11 | bidirectional | GPIO (FT_f, 5 V tolerant, Fm+). Alternate: HRTIM1_EEV2, TIM8_CH2N, UART4_RX, SPI3_MISO, USART3_RX, I2C3_SDA, EVENTOUT. |-| 54 | PC12 | bidirectional | GPIO (FT, 5 V tolerant). Alternate: TIM5_CH2, HRTIM1_EEV1, TIM8_CH3N, UART5_TX, SPI3_MOSI/I2S3_SD, USART3_CK, UCPD1_FRSTX, EVENTOUT. |-| 55 | PD2 | bidirectional | GPIO (FT, 5 V tolerant). Alternate: TIM3_ETR, TIM8_BKIN, UART5_RX, EVENTOUT. |-| 56 | PB3 | bidirectional | JTDO / TRACESWO in reset state (FT, 5 V tolerant). Alternate: JTDO-TRACESWO, TIM2_CH2, TIM4_ETR, UCPD1_CRS_SYNC, TIM8_CH1N, SPI1_SCK, SPI3_SCK/I2S3_CK, USART2_TX, TIM3_ETR, FDCAN3_RX, HRTIM1_SCOUT, HRTIM1_EEV9, SAI1_SCK_B, EVENTOUT. |-| 57 | PB4 | bidirectional | JTRST in reset state (FT_c, 5 V tolerant, USB Type-C PD capable). Additional: UCPD1_CC2. Alternate: JTRST, TIM16_CH1, TIM3_CH1, TIM8_CH2N, SPI1_MISO, SPI3_MISO, USART2_RX, UART5_RTS_DE, TIM17_BKIN, FDCAN3_TX, HRTIM1_EEV7, SAI1_MCLK_B, EVENTOUT. |-| 58 | PB5 | bidirectional | GPIO (FT_f, 5 V tolerant, Fm+). Alternate: TIM16_BKIN, TIM3_CH2, TIM8_CH3N, I2C1_SMBA, SPI1_MOSI, SPI3_MOSI/I2S3_SD, USART2_CK, I2C3_SDA, FDCAN2_RX, TIM17_CH1, LPTIM1_IN1, SAI1_SD_B, HRTIM1_EEV6, UART5_CTS, EVENTOUT. |-| 59 | PB6 | bidirectional | GPIO (FT_c, 5 V tolerant, USB Type-C PD capable). Additional: UCPD1_CC1. Alternate: TIM16_CH1N, TIM4_CH1, TIM8_CH1, TIM8_ETR, USART1_TX, COMP4_OUT, FDCAN2_TX, TIM8_BKIN2, LPTIM1_ETR, HRTIM1_SCIN, HRTIM1_EEV4, SAI1_FS_B, EVENTOUT. |-| 60 | PB7 | bidirectional | GPIO (FT_f, 5 V tolerant, Fm+). Additional: PVD_IN. Alternate: TIM17_CH1N, TIM4_CH2, I2C4_SDA, I2C1_SDA, TIM8_BKIN, USART1_RX, COMP3_OUT, TIM3_CH4, LPTIM1_IN2, FMC_NL, HRTIM1_EEV3, UART4_CTS, EVENTOUT. |-| 61 | PB8-BOOT0 | bidirectional | Multiplexed BOOT0 pin and GPIO PB8 (FT_f, 5 V tolerant, Fm+). At reset the pin selects the boot memory (main Flash / system memory / SRAM) depending on BOOT_SEL and nBOOT1 option bytes; afterwards operates as GPIO PB8. Alternate: TIM16_CH1, TIM4_CH3, SAI1_CK1, I2C1_SCL, USART3_RX, COMP1_OUT, FDCAN1_RX, TIM8_CH2, TIM1_BKIN, HRTIM1_EEV8, SAI1_MCLK_A, EVENTOUT. |-| 62 | PB9 | bidirectional | GPIO (FT_f, 5 V tolerant, Fm+). Alternate: TIM17_CH1, TIM4_CH4, SAI1_D2, I2C1_SDA, IR_OUT, USART3_TX, COMP2_OUT, FDCAN1_TX, TIM8_CH3, TIM1_CH3N, HRTIM1_EEV5, SAI1_FS_A, EVENTOUT. |-| 63 | VSS | power_in | Digital ground reference (0 V). |-| 64 | VDD | power_in | Digital supply, 1.71-3.6 V. Local 100 nF decoupling required. |+| 1 | VBAT | power_in | Backup-domain supply for the RTC, backup registers and LSE, with a backup operating voltage of 1.55 V to 3.6 V. |+| 2 | PC13 | bidirectional | 5 V tolerant (FT) GPIO fed through the power switch, which sinks at most 3 mA, so output use is limited to 2 MHz with 30 pF maximum load and it must not source current to LEDs; alternates include TIM1_BKIN, TIM1_CH1N, TIM8_CH4N, with additional functions WKUP2, RTC_TAMP1, RTC_TS and RTC_OUT1. |+| 3 | PC14-OSC32_IN | bidirectional | 5 V tolerant (FT) GPIO on the backup domain that doubles as the 32 kHz oscillator input OSC32_IN, with the same output limits as PC13 (2 MHz, 30 pF, no current sourcing). |+| 4 | PC15-OSC32_OUT | bidirectional | 5 V tolerant (FT) GPIO on the backup domain that doubles as the 32 kHz oscillator output OSC32_OUT, with the same output limits as PC13 (2 MHz, 30 pF, no current sourcing). |+| 5 | PF0-OSC_IN | bidirectional | FT_fa I/O (Fm+ capable) that doubles as the HSE oscillator input OSC_IN, with additional function ADC1_IN10 and alternates I2C2_SDA, SPI2_NSS/I2S2_WS and TIM1_CH3N. |+| 6 | PF1-OSC_OUT | bidirectional | FT_a I/O that doubles as the HSE oscillator output OSC_OUT, with additional functions ADC2_IN10 and COMP3_INM and alternate SPI2_SCK/I2S2_CK. |+| 7 | PG10-NRST | bidirectional | Bidirectional reset pin with an embedded weak pull-up resistor (NRST), also usable as FT GPIO PG10 with MCO alternate function. |+| 8 | PC0 | bidirectional | FT_a I/O (5 V tolerant) with additional functions ADC12_IN6 and COMP3_INM and alternates LPTIM1_IN1, TIM1_CH1 and LPUART1_RX. |+| 9 | PC1 | bidirectional | TT_a I/O (3.6 V tolerant) with additional functions ADC12_IN7 and COMP3_INP and alternates LPTIM1_OUT, TIM1_CH2, LPUART1_TX, QUADSPI1_BK2_IO0 and SAI1_SD_A. |+| 10 | PC2 | bidirectional | FT_a I/O (5 V tolerant) with additional function ADC12_IN8 and alternates LPTIM1_IN2, TIM1_CH3, COMP3_OUT, TIM20_CH2 and QUADSPI1_BK2_IO1. |+| 11 | PC3 | bidirectional | TT_a I/O (3.6 V tolerant) with additional functions ADC12_IN9 and OPAMP5_VINP and alternates LPTIM1_ETR, TIM1_CH4, SAI1_D1, TIM1_BKIN2 and QUADSPI1_BK2_IO2. |+| 12 | PA0 | bidirectional | TT_a I/O (3.6 V tolerant) with additional functions ADC12_IN1, COMP1_INM, COMP3_INP, RTC_TAMP2 and WKUP1, and alternates TIM2_CH1, TIM5_CH1, USART2_CTS, COMP1_OUT and TIM8_BKIN. |+| 13 | PA1 | bidirectional | TT_a I/O (3.6 V tolerant) with additional functions ADC12_IN2, COMP1_INP, OPAMP1_VINP, OPAMP3_VINP and OPAMP6_VINM, and alternates RTC_REFIN, TIM2_CH2, TIM5_CH2, USART2_RTS_DE and TIM15_CH1N. |+| 14 | PA2 | bidirectional | FT_a I/O (5 V tolerant) with additional functions ADC1_IN3, COMP2_INM, OPAMP1_VOUT and WKUP4/LSCO, and alternates TIM2_CH3, TIM5_CH3, USART2_TX, COMP2_OUT, LPUART1_TX and UCPD1_FRSTX. |+| 15 | VSS | power_in | Ground pin that must always be connected to the external ground within the permitted range. |+| 16 | VDD | power_in | Digital supply pin; standard operating voltage is 1.71 V to 3.6 V and it must always be connected to the external supply. |+| 17 | PA3 | bidirectional | TT_a I/O (3.6 V tolerant) with additional functions ADC1_IN4, COMP2_INP, OPAMP1_VINM/OPAMP1_VINP and OPAMP5_VINM, and alternates TIM2_CH4, TIM5_CH4, SAI1_CK1, USART2_RX and LPUART1_RX. |+| 18 | PA4 | bidirectional | TT_a I/O (3.6 V tolerant) with additional functions ADC2_IN17, DAC1_OUT1 and COMP1_INM, and alternates TIM3_CH2, SPI1_NSS, SPI3_NSS/I2S3_WS, USART2_CK and SAI1_FS_B. |+| 19 | PA5 | bidirectional | TT_a I/O (3.6 V tolerant) with additional functions ADC2_IN13, DAC1_OUT2, COMP2_INM and OPAMP2_VINM, and alternates TIM2_CH1, TIM2_ETR, SPI1_SCK and UCPD1_FRSTX. |+| 20 | PA6 | bidirectional | TT_a I/O (3.6 V tolerant) with additional functions ADC2_IN3, DAC2_OUT1 and OPAMP2_VOUT, and alternates TIM16_CH1, TIM3_CH1, SPI1_MISO, COMP1_OUT and QUADSPI1_BK1_IO3. |+| 21 | PA7 | bidirectional | TT_a I/O (3.6 V tolerant) with additional functions ADC2_IN4, COMP2_INP, OPAMP1_VINP and OPAMP2_VINP, and alternates TIM17_CH1, TIM3_CH2, SPI1_MOSI, TIM1_CH1N, COMP2_OUT and QUADSPI1_BK1_IO2. |+| 22 | PC4 | bidirectional | FT_fa I/O (5 V tolerant, Fm+ capable) with additional function ADC2_IN5 and alternates TIM1_ETR, I2C2_SCL, USART1_TX and QUADSPI1_BK2_IO3. |+| 23 | PC5 | bidirectional | TT_a I/O (3.6 V tolerant) with additional functions ADC2_IN11, OPAMP1_VINM, OPAMP2_VINM and WKUP5, and alternates TIM15_BKIN, SAI1_D3, TIM1_CH4N, USART1_RX and HRTIM1_EEV10. |+| 24 | PB0 | bidirectional | TT_a I/O (3.6 V tolerant) with additional functions ADC3_IN12/ADC1_IN15, COMP4_INP, OPAMP2_VINP and OPAMP3_VINP, and alternates TIM3_CH3, TIM1_CH2N, QUADSPI1_BK1_IO1, HRTIM1_FLT5 and UCPD1_FRSTX. |+| 25 | PB1 | bidirectional | TT_a I/O (3.6 V tolerant) with additional functions ADC3_IN1/ADC1_IN12, COMP1_INP, OPAMP3_VOUT and OPAMP6_VINM, and alternates TIM3_CH4, TIM1_CH3N, COMP4_OUT, QUADSPI1_BK1_IO0 and LPUART1_RTS_DE. |+| 26 | PB2 | bidirectional | TT_a I/O (3.6 V tolerant) with additional functions ADC2_IN12, COMP4_INM and OPAMP3_VINM, and alternates RTC_OUT2, LPTIM1_OUT, TIM5_CH1, TIM20_CH1, I2C3_SMBA, QUADSPI1_BK2_IO1 and HRTIM1_SCIN. |+| 27 | VSSA | power_in | Analog ground pin for the analog domain that supplies the ADCs, DACs, OPAMPs, COMPs and VREFBUF. |+| 28 | VREF+ | power_in | Positive reference voltage input for the ADCs and DACs (with VREFBUF_OUT as an additional function); VREF+ may exceed VDDA by no more than 0.4 V. |+| 29 | VDDA | power_in | Analog supply pin; ADC requires at least 1.62 V, DAC 1 MSPS/15 MSPS and OPAMP at least 1.8 V, VREFBUF used at least 2.4 V, with a maximum of 3.6 V. |+| 30 | PB10 | bidirectional | TT_a I/O (3.6 V tolerant) with additional functions COMP5_INM, OPAMP3_VINM and OPAMP4_VINM, and alternates TIM2_CH3, USART3_TX, LPUART1_RX, QUADSPI1_CLK, TIM1_BKIN and HRTIM1_FLT3. |+| 31 | VSS | power_in | Ground pin that must always be connected to the external ground within the permitted range. |+| 32 | VDD | power_in | Digital supply pin; standard operating voltage is 1.71 V to 3.6 V and it must always be connected to the external supply. |+| 33 | PB11 | bidirectional | TT_a I/O (3.6 V tolerant) with additional functions ADC12_IN14, COMP6_INP, OPAMP4_VINP and OPAMP6_VOUT, and alternates TIM2_CH4, USART3_RX, LPUART1_TX, QUADSPI1_BK1_NCS and HRTIM1_FLT4. |+| 34 | PB12 | bidirectional | TT_a I/O (3.6 V tolerant) with additional functions ADC4_IN3/ADC1_IN11, COMP7_INM, OPAMP4_VOUT and OPAMP6_VINP, and alternates TIM5_ETR, I2C2_SMBA, SPI2_NSS/I2S2_WS, TIM1_BKIN, USART3_CK, FDCAN2_RX and HRTIM1_CHC1. |+| 35 | PB13 | bidirectional | TT_a I/O (3.6 V tolerant) with additional functions ADC3_IN5, COMP5_INP, OPAMP3_VINP, OPAMP4_VINP and OPAMP6_VINP, and alternates SPI2_SCK/I2S2_CK, TIM1_CH1N, USART3_CTS, FDCAN2_TX and HRTIM1_CHC2. |+| 36 | PB14 | bidirectional | TT_a I/O (3.6 V tolerant) with additional functions ADC4_IN4/ADC1_IN5, COMP7_INP, OPAMP2_VINP and OPAMP5_VINP, and alternates TIM15_CH1, SPI2_MISO, TIM1_CH2N, USART3_RTS_DE, COMP4_OUT and HRTIM1_CHD1. |+| 37 | PB15 | bidirectional | TT_a I/O (3.6 V tolerant) with additional functions ADC4_IN5/ADC2_IN15, COMP6_INM and OPAMP5_VINM, and alternates RTC_REFIN, TIM15_CH2, TIM15_CH1N, TIM1_CH3N, SPI2_MOSI/I2S2_SD and HRTIM1_CHD2. |+| 38 | PC6 | bidirectional | FT_f I/O (5 V tolerant, Fm+ capable) with alternates TIM3_CH1, HRTIM1_EEV10, TIM8_CH1, I2S2_MCK, COMP6_OUT, I2C4_SCL and HRTIM1_CHF1. |+| 39 | PC7 | bidirectional | FT_f I/O (5 V tolerant, Fm+ capable) with alternates TIM3_CH2, HRTIM1_FLT5, TIM8_CH2, I2S3_MCK, COMP5_OUT, I2C4_SDA and HRTIM1_CHF2. |+| 40 | PC8 | bidirectional | FT_f I/O (5 V tolerant, Fm+ capable) with alternates TIM3_CH3, HRTIM1_CHE1, TIM8_CH3, TIM20_CH3, COMP7_OUT and I2C3_SCL. |+| 41 | PC9 | bidirectional | FT_f I/O (5 V tolerant, Fm+ capable) with alternates TIM3_CH4, HRTIM1_CHE2, TIM8_CH4, I2SCKIN, TIM8_BKIN2 and I2C3_SDA. |+| 42 | PA8 | bidirectional | FT_a I/O (5 V tolerant) with additional functions ADC5_IN1 and OPAMP5_VOUT, and alternates MCO, I2C3_SCL, I2C2_SDA, TIM1_CH1, USART1_CK, COMP7_OUT, FDCAN3_RX and HRTIM1_CHA1. |+| 43 | PA9 | bidirectional | FT_fda I/O (5 V tolerant, Fm+ capable, USB Type-C dead battery capable) with additional function UCPD1_DBCC1 and alternates I2C3_SMBA, I2C2_SCL, TIM1_CH2, USART1_TX, COMP5_OUT, TIM15_BKIN and HRTIM1_CHA2. |+| 44 | PA10 | bidirectional | FT_fda I/O (5 V tolerant, Fm+ capable, USB Type-C dead battery capable) with additional function UCPD1_DBCC2 and alternates TIM17_BKIN, USB_CRS_SYNC, I2C2_SMBA, SPI2_MISO, TIM1_CH3, USART1_RX and HRTIM1_CHB1. |+| 45 | PA11 | bidirectional | FT_u I/O (5 V tolerant, USB function) with additional function USB_DM and alternates SPI2_MOSI/I2S2_SD, TIM1_CH1N, USART1_CTS, COMP1_OUT, FDCAN1_RX and HRTIM1_CHB2. |+| 46 | PA12 | bidirectional | FT_u I/O (5 V tolerant, USB function) with additional function USB_DP and alternates TIM16_CH1, I2SCKIN, TIM1_CH2N, USART1_RTS_DE, COMP2_OUT, FDCAN1_TX and HRTIM1_FLT1. |+| 47 | VSS | power_in | Ground pin that must always be connected to the external ground within the permitted range. |+| 48 | VDD | power_in | Digital supply pin; standard operating voltage is 1.71 V to 3.6 V and it must always be connected to the external supply. |+| 49 | PA13 | bidirectional | FT_f I/O (5 V tolerant, Fm+ capable) that defaults to the SWDIO-JTMS debug function after reset with its internal pull-up activated, and also has alternates TIM16_CH1N, I2C4_SCL, I2C1_SCL, IR_OUT, USART3_CTS and TIM4_CH3. |+| 50 | PA14 | bidirectional | FT_f I/O (5 V tolerant, Fm+ capable) that defaults to the SWCLK-JTCK debug function after reset with its internal pull-down activated, and also has alternates LPTIM1_OUT, I2C4_SMBA, I2C1_SDA, TIM8_CH2, TIM1_BKIN and USART2_TX. |+| 51 | PA15 | bidirectional | FT_f I/O (5 V tolerant, Fm+ capable) that defaults to the JTDI debug function after reset with its internal pull-up activated, and also has alternates TIM2_CH1, TIM8_CH1, I2C1_SCL, SPI1_NSS, SPI3_NSS/I2S3_WS, USART2_RX, TIM1_BKIN and FDCAN3_TX. |+| 52 | PC10 | bidirectional | FT I/O (5 V tolerant) with alternates TIM8_CH1N, UART4_TX, SPI3_SCK/I2S3_CK, USART3_TX and HRTIM1_FLT6. |+| 53 | PC11 | bidirectional | FT_f I/O (5 V tolerant, Fm+ capable) with alternates HRTIM1_EEV2, TIM8_CH2N, UART4_RX, SPI3_MISO, USART3_RX and I2C3_SDA. |+| 54 | PC12 | bidirectional | FT I/O (5 V tolerant) with alternates TIM5_CH2, HRTIM1_EEV1, TIM8_CH3N, UART5_TX, SPI3_MOSI/I2S3_SD, USART3_CK and UCPD1_FRSTX. |+| 55 | PD2 | bidirectional | FT I/O (5 V tolerant) with alternates TIM3_ETR, TIM8_BKIN and UART5_RX. |+| 56 | PB3 | bidirectional | FT I/O (5 V tolerant) that defaults to the JTDO-TRACESWO debug function after reset, with alternates TIM2_CH2, TIM4_ETR, USB_CRS_SYNC, SPI1_SCK, SPI3_SCK/I2S3_CK, USART2_TX, TIM3_ETR and FDCAN3_RX. |+| 57 | PB4 | bidirectional | FT_c I/O (5 V tolerant, USB Type-C PD capable) that defaults to the JTRST debug function after reset with its internal pull-up activated, with additional function UCPD1_CC2 and alternates TIM16_CH1, TIM3_CH1, SPI1_MISO, SPI3_MISO, USART2_RX and FDCAN3_TX. |+| 58 | PB5 | bidirectional | FT_f I/O (5 V tolerant, Fm+ capable) with alternates TIM16_BKIN, TIM3_CH2, TIM8_CH3N, I2C1_SMBA, SPI1_MOSI, SPI3_MOSI/I2S3_SD, USART2_CK, I2C3_SDA, FDCAN2_RX and TIM17_CH1. |+| 59 | PB6 | bidirectional | FT_c I/O (5 V tolerant, USB Type-C PD capable) with additional function UCPD1_CC1 and alternates TIM16_CH1N, TIM4_CH1, TIM8_CH1, USART1_TX, COMP4_OUT and FDCAN2_TX. |+| 60 | PB7 | bidirectional | FT_f I/O (5 V tolerant, Fm+ capable) with additional function PVD_IN and alternates TIM17_CH1N, TIM4_CH2, I2C4_SDA, I2C1_SDA, TIM8_BKIN, USART1_RX and COMP3_OUT. |+| 61 | PB8-BOOT0 | bidirectional | FT_f I/O (5 V tolerant, Fm+ capable) that is also the BOOT0 pin; it is recommended to set PB8 to a mode other than analog after startup to limit consumption if left unconnected, with alternates TIM16_CH1, TIM4_CH3, I2C1_SCL, USART3_RX and FDCAN1_RX. |+| 62 | PB9 | bidirectional | FT_f I/O (5 V tolerant, Fm+ capable) with alternates TIM17_CH1, TIM4_CH4, SAI1_D2, I2C1_SDA, IR_OUT, USART3_TX, COMP2_OUT, FDCAN1_TX and TIM8_CH3. |+| 63 | VSS | power_in | Ground pin that must always be connected to the external ground within the permitted range. |+| 64 | VDD | power_in | Digital supply pin; standard operating voltage is 1.71 V to 3.6 V and it must always be connected to the external supply. |  ## Key specifications  | Parameter | Value | |---|---|+| Core | Arm Cortex-M4 |+| Max clock | 170 MHz |+| Flash | 512 kB |+| RAM | 128 kB |+| I/O pins | 52 |+| ADC units | 5 |+| Supply | 1.71 to 3.6 V |+| Temperature | -40 to 85 C |+| ST status | Active | | Manufacturer | STMicroelectronics | | Package | LQFP-64(10x10) | | Category | MCU | | Pins | 64 | -## Ordering variants+## Electrical characteristics -Same part, different packaging or reel option.+Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data). -- `STM32G474RET6CxU`-- `STM32G474RET6CxT`-- `STM32G474RET6RBT6`-- `STM32G474RET6RCT6`-- `STM32G474RET6`-- `STM32G474RET6MBT6`-- `STM32G474RET6MCT6`-- `STM32G474RET6MET6`-- `STM32G474RET6VBT6`-- `STM32G474RET6VCT6`-- `STM32G474RET6VET6`-- `STM32G474RET6QBT6`-- `STM32G474RET6QCT6`-- `STM32G474RET6QET6`-- `STM32G474RET6AxY`-- `STM32G474RET6VxH`-- `STM32G474RET6QxJ`+| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |+|---|---|---|---|---|---|---|---|+| VDD supply voltage operating range | VDD | 1.71 |  | 3.6 | V |  | 23 |+| VDDA analog supply voltage operating range | VDDA | 1.62 |  | 3.6 | V | Minimum VDDA for ADC/DAC/COMP/OPAMP/VREFBUF operation is given in Section 5 | 23 |+| VBAT supply voltage range | VBAT | 1.55 |  | 3.6 | V | VBAT powers RTC, 32 kHz oscillator and backup registers when VDD is absent | 24 |+| Ambient operating temperature range (grade -40 to +85 °C) |  | -40 |  | 85 | °C | Junction temperature up to +105 °C; family-level statement, grade for suffix 6 not confirmed | 14 |+| Ambient operating temperature range (grade -40 to +125 °C) |  | -40 |  | 125 | °C | Junction temperature up to +130 °C; family-level statement, grade for suffix 6 not confirmed | 14 |+| Internal 16 MHz RC oscillator accuracy with PLL option |  | -1 |  | 1 | % | Features list: internal 16 MHz RC with PLL option | 1 |+| Internal 32 kHz RC oscillator accuracy |  | -5 |  | 5 | % | Features list: internal 32 kHz RC oscillator | 1 |+| I2C Fast-mode-plus current sink |  |  |  | 20 | mA | 4 x I2C Fast mode plus (1 Mbit/s) with 20 mA current sink, features list | 2 |+| PC13/PC14/PC15 power switch sink current limit |  |  |  | 3 | mA | Power switch sinks a limited amount of current, Table 12 note 2 | 58 |+| PC13/PC14/PC15 GPIO output speed |  |  |  | 2 | MHz | Output mode with maximum load 30 pF, Table 12 note 2 | 58 |+| ADC conversion voltage range |  | 0 |  | 3.6 | V | 0 to 3.6 V conversion range, features list | 1 |  ## CAD (KiCad official) @@ -115,8 +120,8 @@ Same part, different packaging or reel option.  Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [STMicroelectronics datasheet](https://www.st.com/resource/en/datasheet/stm32g474ret6.pdf) (236 pp, sha256 `d493fe0ab22e61ff`, retrieved 2026-08-17, tier: manufacturer)-- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **Datasheet:** [STMicroelectronics datasheet](https://www.st.com/resource/en/datasheet/stm32g474ret6.pdf) (236 pp, sha256 `d493fe0ab22e61ff`, retrieved 2026-11-13, tier: manufacturer)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** KiCad official libraries (CC-BY-SA 4.0).  [Datasheet PDF](docs/stm32g474ret6-datasheet.pdf)
docs/hero.png
⋯ 1 unchanged line ⋯
package.json+572−6
@@ -1,12 +1,14 @@ {   "slug": "stm32g474ret6",-  "version": "0.1.2",+  "version": "0.1.3",   "type": "component",-  "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-64(10x10). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-64(10x10). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.",   "tags": [     "component",     "mcu",-    "stm32g474ret6"+    "stm32g474ret6",+    "factory-2.0.0",+    "extractor-text"   ],   "dependencies": {},   "hero": {@@ -25,8 +27,572 @@     "docs/stm32g474ret6-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html",-    "stm32g474ret6-etched.glb",-    "stm32g474ret6-etched.step"+    "stm32g474ret6-hero.glb",+    "stm32g474ret6-hero.overlay.json"   ],-  "visibility": "public"+  "component": {+    "mpn": "STM32G474RET6",+    "manufacturer": "STMicroelectronics",+    "package": "LQFP-64(10x10)",+    "pin_count": 64,+    "category": "MCU",+    "subcategory": "Microcontrollers (MCU/MPU/SOC)",+    "datasheet": "https://www.st.com/resource/en/datasheet/stm32g474ret6.pdf",+    "parts": {+      "symbol": "stm32g474ret6.kicad_sym",+      "footprint": "stm32g474ret6.kicad_mod",+      "model_3d": "stm32g474ret6-hero.glb",+      "model_3d_plain": "stm32g474ret6.glb",+      "model_3d_step": "stm32g474ret6-etched.step",+      "model_3d_step_plain": "stm32g474ret6.step",+      "lbr": "stm32g474ret6.lbr"+    },+    "distributor_links": {+      "digikey": "497-STM32G474RET6-ND",+      "mouser": "511-STM32G474RET6"+    },+    "distributor_check": {+      "checked_at": "2026-11-13T07:43:01Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "497-STM32G474RET6-ND",+        "status": "found"+      },+      "mouser": {+        "pn": "511-STM32G474RET6",+        "status": "found"+      }+    },+    "mcu": {+      "part_number": "STM32G474RET6",+      "series": "STM32G4",+      "subfamily": "STM32G474",+      "core": "Arm Cortex-M4",+      "frequency_mhz": 170,+      "flash_kb": 512,+      "ram_kb": 128,+      "io_count": 52,+      "package": "LQFP 64 10x10x1.4 mm",+      "marketing_status": "Active",+      "fpu": "Single-precision FPU",+      "supply_v_min": 1.71,+      "supply_v_max": 3.6,+      "temp_min_c": -40,+      "temp_max_c": 85,+      "adc_count": 5,+      "timers": 11,+      "in_distributor_stock": true,+      "product_folder": "/en/microcontrollers-microprocessors/stm32g474re.html",+      "source": "st.com portfolio grid CL1734"+    },+    "pins": [+      {+        "number": "1",+        "name": "VBAT",+        "type": "power_in",+        "description": "Backup-domain supply for the RTC, backup registers and LSE, with a backup operating voltage of 1.55 V to 3.6 V."+      },+      {+        "number": "2",+        "name": "PC13",+        "type": "bidirectional",+        "description": "5 V tolerant (FT) GPIO fed through the power switch, which sinks at most 3 mA, so output use is limited to 2 MHz with 30 pF maximum load and it must not source current to LEDs; alternates include TIM1_BKIN, TIM1_CH1N, TIM8_CH4N, with additional functions WKUP2, RTC_TAMP1, RTC_TS and RTC_OUT1."+      },+      {+        "number": "3",+        "name": "PC14-OSC32_IN",+        "type": "bidirectional",+        "description": "5 V tolerant (FT) GPIO on the backup domain that doubles as the 32 kHz oscillator input OSC32_IN, with the same output limits as PC13 (2 MHz, 30 pF, no current sourcing)."+      },+      {+        "number": "4",+        "name": "PC15-OSC32_OUT",+        "type": "bidirectional",+        "description": "5 V tolerant (FT) GPIO on the backup domain that doubles as the 32 kHz oscillator output OSC32_OUT, with the same output limits as PC13 (2 MHz, 30 pF, no current sourcing)."+      },+      {+        "number": "5",+        "name": "PF0-OSC_IN",+        "type": "bidirectional",+        "description": "FT_fa I/O (Fm+ capable) that doubles as the HSE oscillator input OSC_IN, with additional function ADC1_IN10 and alternates I2C2_SDA, SPI2_NSS/I2S2_WS and TIM1_CH3N."+      },+      {+        "number": "6",+        "name": "PF1-OSC_OUT",+        "type": "bidirectional",+        "description": "FT_a I/O that doubles as the HSE oscillator output OSC_OUT, with additional functions ADC2_IN10 and COMP3_INM and alternate SPI2_SCK/I2S2_CK."+      },+      {+        "number": "7",+        "name": "PG10-NRST",+        "type": "bidirectional",+        "description": "Bidirectional reset pin with an embedded weak pull-up resistor (NRST), also usable as FT GPIO PG10 with MCO alternate function."+      },+      {+        "number": "8",+        "name": "PC0",+        "type": "bidirectional",+        "description": "FT_a I/O (5 V tolerant) with additional functions ADC12_IN6 and COMP3_INM and alternates LPTIM1_IN1, TIM1_CH1 and LPUART1_RX."+      },+      {+        "number": "9",+        "name": "PC1",+        "type": "bidirectional",+        "description": "TT_a I/O (3.6 V tolerant) with additional functions ADC12_IN7 and COMP3_INP and alternates LPTIM1_OUT, TIM1_CH2, LPUART1_TX, QUADSPI1_BK2_IO0 and SAI1_SD_A."+      },+      {+        "number": "10",+        "name": "PC2",+        "type": "bidirectional",+        "description": "FT_a I/O (5 V tolerant) with additional function ADC12_IN8 and alternates LPTIM1_IN2, TIM1_CH3, COMP3_OUT, TIM20_CH2 and QUADSPI1_BK2_IO1."+      },+      {+        "number": "11",+        "name": "PC3",+        "type": "bidirectional",+        "description": "TT_a I/O (3.6 V tolerant) with additional functions ADC12_IN9 and OPAMP5_VINP and alternates LPTIM1_ETR, TIM1_CH4, SAI1_D1, TIM1_BKIN2 and QUADSPI1_BK2_IO2."+      },+      {+        "number": "12",+        "name": "PA0",+        "type": "bidirectional",+        "description": "TT_a I/O (3.6 V tolerant) with additional functions ADC12_IN1, COMP1_INM, COMP3_INP, RTC_TAMP2 and WKUP1, and alternates TIM2_CH1, TIM5_CH1, USART2_CTS, COMP1_OUT and TIM8_BKIN."+      },+      {+        "number": "13",+        "name": "PA1",+        "type": "bidirectional",+        "description": "TT_a I/O (3.6 V tolerant) with additional functions ADC12_IN2, COMP1_INP, OPAMP1_VINP, OPAMP3_VINP and OPAMP6_VINM, and alternates RTC_REFIN, TIM2_CH2, TIM5_CH2, USART2_RTS_DE and TIM15_CH1N."+      },+      {+        "number": "14",+        "name": "PA2",+        "type": "bidirectional",+        "description": "FT_a I/O (5 V tolerant) with additional functions ADC1_IN3, COMP2_INM, OPAMP1_VOUT and WKUP4/LSCO, and alternates TIM2_CH3, TIM5_CH3, USART2_TX, COMP2_OUT, LPUART1_TX and UCPD1_FRSTX."+      },+      {+        "number": "15",+        "name": "VSS",+        "type": "power_in",+        "description": "Ground pin that must always be connected to the external ground within the permitted range."+      },+      {+        "number": "16",+        "name": "VDD",+        "type": "power_in",+        "description": "Digital supply pin; standard operating voltage is 1.71 V to 3.6 V and it must always be connected to the external supply."+      },+      {+        "number": "17",+        "name": "PA3",+        "type": "bidirectional",+        "description": "TT_a I/O (3.6 V tolerant) with additional functions ADC1_IN4, COMP2_INP, OPAMP1_VINM/OPAMP1_VINP and OPAMP5_VINM, and alternates TIM2_CH4, TIM5_CH4, SAI1_CK1, USART2_RX and LPUART1_RX."+      },+      {+        "number": "18",+        "name": "PA4",+        "type": "bidirectional",+        "description": "TT_a I/O (3.6 V tolerant) with additional functions ADC2_IN17, DAC1_OUT1 and COMP1_INM, and alternates TIM3_CH2, SPI1_NSS, SPI3_NSS/I2S3_WS, USART2_CK and SAI1_FS_B."+      },+      {+        "number": "19",+        "name": "PA5",+        "type": "bidirectional",+        "description": "TT_a I/O (3.6 V tolerant) with additional functions ADC2_IN13, DAC1_OUT2, COMP2_INM and OPAMP2_VINM, and alternates TIM2_CH1, TIM2_ETR, SPI1_SCK and UCPD1_FRSTX."+      },+      {+        "number": "20",+        "name": "PA6",+        "type": "bidirectional",+        "description": "TT_a I/O (3.6 V tolerant) with additional functions ADC2_IN3, DAC2_OUT1 and OPAMP2_VOUT, and alternates TIM16_CH1, TIM3_CH1, SPI1_MISO, COMP1_OUT and QUADSPI1_BK1_IO3."+      },+      {+        "number": "21",+        "name": "PA7",+        "type": "bidirectional",+        "description": "TT_a I/O (3.6 V tolerant) with additional functions ADC2_IN4, COMP2_INP, OPAMP1_VINP and OPAMP2_VINP, and alternates TIM17_CH1, TIM3_CH2, SPI1_MOSI, TIM1_CH1N, COMP2_OUT and QUADSPI1_BK1_IO2."+      },+      {+        "number": "22",+        "name": "PC4",+        "type": "bidirectional",+        "description": "FT_fa I/O (5 V tolerant, Fm+ capable) with additional function ADC2_IN5 and alternates TIM1_ETR, I2C2_SCL, USART1_TX and QUADSPI1_BK2_IO3."+      },+      {+        "number": "23",+        "name": "PC5",+        "type": "bidirectional",+        "description": "TT_a I/O (3.6 V tolerant) with additional functions ADC2_IN11, OPAMP1_VINM, OPAMP2_VINM and WKUP5, and alternates TIM15_BKIN, SAI1_D3, TIM1_CH4N, USART1_RX and HRTIM1_EEV10."+      },+      {+        "number": "24",+        "name": "PB0",+        "type": "bidirectional",+        "description": "TT_a I/O (3.6 V tolerant) with additional functions ADC3_IN12/ADC1_IN15, COMP4_INP, OPAMP2_VINP and OPAMP3_VINP, and alternates TIM3_CH3, TIM1_CH2N, QUADSPI1_BK1_IO1, HRTIM1_FLT5 and UCPD1_FRSTX."+      },+      {+        "number": "25",+        "name": "PB1",+        "type": "bidirectional",+        "description": "TT_a I/O (3.6 V tolerant) with additional functions ADC3_IN1/ADC1_IN12, COMP1_INP, OPAMP3_VOUT and OPAMP6_VINM, and alternates TIM3_CH4, TIM1_CH3N, COMP4_OUT, QUADSPI1_BK1_IO0 and LPUART1_RTS_DE."+      },+      {+        "number": "26",+        "name": "PB2",+        "type": "bidirectional",+        "description": "TT_a I/O (3.6 V tolerant) with additional functions ADC2_IN12, COMP4_INM and OPAMP3_VINM, and alternates RTC_OUT2, LPTIM1_OUT, TIM5_CH1, TIM20_CH1, I2C3_SMBA, QUADSPI1_BK2_IO1 and HRTIM1_SCIN."+      },+      {+        "number": "27",+        "name": "VSSA",+        "type": "power_in",+        "description": "Analog ground pin for the analog domain that supplies the ADCs, DACs, OPAMPs, COMPs and VREFBUF."+      },+      {+        "number": "28",+        "name": "VREF+",+        "type": "power_in",+        "description": "Positive reference voltage input for the ADCs and DACs (with VREFBUF_OUT as an additional function); VREF+ may exceed VDDA by no more than 0.4 V."+      },+      {+        "number": "29",+        "name": "VDDA",+        "type": "power_in",+        "description": "Analog supply pin; ADC requires at least 1.62 V, DAC 1 MSPS/15 MSPS and OPAMP at least 1.8 V, VREFBUF used at least 2.4 V, with a maximum of 3.6 V."+      },+      {+        "number": "30",+        "name": "PB10",+        "type": "bidirectional",+        "description": "TT_a I/O (3.6 V tolerant) with additional functions COMP5_INM, OPAMP3_VINM and OPAMP4_VINM, and alternates TIM2_CH3, USART3_TX, LPUART1_RX, QUADSPI1_CLK, TIM1_BKIN and HRTIM1_FLT3."+      },+      {+        "number": "31",+        "name": "VSS",+        "type": "power_in",+        "description": "Ground pin that must always be connected to the external ground within the permitted range."+      },+      {+        "number": "32",+        "name": "VDD",+        "type": "power_in",+        "description": "Digital supply pin; standard operating voltage is 1.71 V to 3.6 V and it must always be connected to the external supply."+      },+      {+        "number": "33",+        "name": "PB11",+        "type": "bidirectional",+        "description": "TT_a I/O (3.6 V tolerant) with additional functions ADC12_IN14, COMP6_INP, OPAMP4_VINP and OPAMP6_VOUT, and alternates TIM2_CH4, USART3_RX, LPUART1_TX, QUADSPI1_BK1_NCS and HRTIM1_FLT4."+      },+      {+        "number": "34",+        "name": "PB12",+        "type": "bidirectional",+        "description": "TT_a I/O (3.6 V tolerant) with additional functions ADC4_IN3/ADC1_IN11, COMP7_INM, OPAMP4_VOUT and OPAMP6_VINP, and alternates TIM5_ETR, I2C2_SMBA, SPI2_NSS/I2S2_WS, TIM1_BKIN, USART3_CK, FDCAN2_RX and HRTIM1_CHC1."+      },+      {+        "number": "35",+        "name": "PB13",+        "type": "bidirectional",+        "description": "TT_a I/O (3.6 V tolerant) with additional functions ADC3_IN5, COMP5_INP, OPAMP3_VINP, OPAMP4_VINP and OPAMP6_VINP, and alternates SPI2_SCK/I2S2_CK, TIM1_CH1N, USART3_CTS, FDCAN2_TX and HRTIM1_CHC2."+      },+      {+        "number": "36",+        "name": "PB14",+        "type": "bidirectional",+        "description": "TT_a I/O (3.6 V tolerant) with additional functions ADC4_IN4/ADC1_IN5, COMP7_INP, OPAMP2_VINP and OPAMP5_VINP, and alternates TIM15_CH1, SPI2_MISO, TIM1_CH2N, USART3_RTS_DE, COMP4_OUT and HRTIM1_CHD1."+      },+      {+        "number": "37",+        "name": "PB15",+        "type": "bidirectional",+        "description": "TT_a I/O (3.6 V tolerant) with additional functions ADC4_IN5/ADC2_IN15, COMP6_INM and OPAMP5_VINM, and alternates RTC_REFIN, TIM15_CH2, TIM15_CH1N, TIM1_CH3N, SPI2_MOSI/I2S2_SD and HRTIM1_CHD2."+      },+      {+        "number": "38",+        "name": "PC6",+        "type": "bidirectional",+        "description": "FT_f I/O (5 V tolerant, Fm+ capable) with alternates TIM3_CH1, HRTIM1_EEV10, TIM8_CH1, I2S2_MCK, COMP6_OUT, I2C4_SCL and HRTIM1_CHF1."+      },+      {+        "number": "39",+        "name": "PC7",+        "type": "bidirectional",+        "description": "FT_f I/O (5 V tolerant, Fm+ capable) with alternates TIM3_CH2, HRTIM1_FLT5, TIM8_CH2, I2S3_MCK, COMP5_OUT, I2C4_SDA and HRTIM1_CHF2."+      },+      {+        "number": "40",+        "name": "PC8",+        "type": "bidirectional",+        "description": "FT_f I/O (5 V tolerant, Fm+ capable) with alternates TIM3_CH3, HRTIM1_CHE1, TIM8_CH3, TIM20_CH3, COMP7_OUT and I2C3_SCL."+      },+      {+        "number": "41",+        "name": "PC9",+        "type": "bidirectional",+        "description": "FT_f I/O (5 V tolerant, Fm+ capable) with alternates TIM3_CH4, HRTIM1_CHE2, TIM8_CH4, I2SCKIN, TIM8_BKIN2 and I2C3_SDA."+      },+      {+        "number": "42",+        "name": "PA8",+        "type": "bidirectional",+        "description": "FT_a I/O (5 V tolerant) with additional functions ADC5_IN1 and OPAMP5_VOUT, and alternates MCO, I2C3_SCL, I2C2_SDA, TIM1_CH1, USART1_CK, COMP7_OUT, FDCAN3_RX and HRTIM1_CHA1."+      },+      {+        "number": "43",+        "name": "PA9",+        "type": "bidirectional",+        "description": "FT_fda I/O (5 V tolerant, Fm+ capable, USB Type-C dead battery capable) with additional function UCPD1_DBCC1 and alternates I2C3_SMBA, I2C2_SCL, TIM1_CH2, USART1_TX, COMP5_OUT, TIM15_BKIN and HRTIM1_CHA2."+      },+      {+        "number": "44",+        "name": "PA10",+        "type": "bidirectional",+        "description": "FT_fda I/O (5 V tolerant, Fm+ capable, USB Type-C dead battery capable) with additional function UCPD1_DBCC2 and alternates TIM17_BKIN, USB_CRS_SYNC, I2C2_SMBA, SPI2_MISO, TIM1_CH3, USART1_RX and HRTIM1_CHB1."+      },+      {+        "number": "45",+        "name": "PA11",+        "type": "bidirectional",+        "description": "FT_u I/O (5 V tolerant, USB function) with additional function USB_DM and alternates SPI2_MOSI/I2S2_SD, TIM1_CH1N, USART1_CTS, COMP1_OUT, FDCAN1_RX and HRTIM1_CHB2."+      },+      {+        "number": "46",+        "name": "PA12",+        "type": "bidirectional",+        "description": "FT_u I/O (5 V tolerant, USB function) with additional function USB_DP and alternates TIM16_CH1, I2SCKIN, TIM1_CH2N, USART1_RTS_DE, COMP2_OUT, FDCAN1_TX and HRTIM1_FLT1."+      },+      {+        "number": "47",+        "name": "VSS",+        "type": "power_in",+        "description": "Ground pin that must always be connected to the external ground within the permitted range."+      },+      {+        "number": "48",+        "name": "VDD",+        "type": "power_in",+        "description": "Digital supply pin; standard operating voltage is 1.71 V to 3.6 V and it must always be connected to the external supply."+      },+      {+        "number": "49",+        "name": "PA13",+        "type": "bidirectional",+        "description": "FT_f I/O (5 V tolerant, Fm+ capable) that defaults to the SWDIO-JTMS debug function after reset with its internal pull-up activated, and also has alternates TIM16_CH1N, I2C4_SCL, I2C1_SCL, IR_OUT, USART3_CTS and TIM4_CH3."+      },+      {+        "number": "50",+        "name": "PA14",+        "type": "bidirectional",+        "description": "FT_f I/O (5 V tolerant, Fm+ capable) that defaults to the SWCLK-JTCK debug function after reset with its internal pull-down activated, and also has alternates LPTIM1_OUT, I2C4_SMBA, I2C1_SDA, TIM8_CH2, TIM1_BKIN and USART2_TX."+      },+      {+        "number": "51",+        "name": "PA15",+        "type": "bidirectional",+        "description": "FT_f I/O (5 V tolerant, Fm+ capable) that defaults to the JTDI debug function after reset with its internal pull-up activated, and also has alternates TIM2_CH1, TIM8_CH1, I2C1_SCL, SPI1_NSS, SPI3_NSS/I2S3_WS, USART2_RX, TIM1_BKIN and FDCAN3_TX."+      },+      {+        "number": "52",+        "name": "PC10",+        "type": "bidirectional",+        "description": "FT I/O (5 V tolerant) with alternates TIM8_CH1N, UART4_TX, SPI3_SCK/I2S3_CK, USART3_TX and HRTIM1_FLT6."+      },+      {+        "number": "53",+        "name": "PC11",+        "type": "bidirectional",+        "description": "FT_f I/O (5 V tolerant, Fm+ capable) with alternates HRTIM1_EEV2, TIM8_CH2N, UART4_RX, SPI3_MISO, USART3_RX and I2C3_SDA."+      },+      {+        "number": "54",+        "name": "PC12",+        "type": "bidirectional",+        "description": "FT I/O (5 V tolerant) with alternates TIM5_CH2, HRTIM1_EEV1, TIM8_CH3N, UART5_TX, SPI3_MOSI/I2S3_SD, USART3_CK and UCPD1_FRSTX."+      },+      {+        "number": "55",+        "name": "PD2",+        "type": "bidirectional",+        "description": "FT I/O (5 V tolerant) with alternates TIM3_ETR, TIM8_BKIN and UART5_RX."+      },+      {+        "number": "56",+        "name": "PB3",+        "type": "bidirectional",+        "description": "FT I/O (5 V tolerant) that defaults to the JTDO-TRACESWO debug function after reset, with alternates TIM2_CH2, TIM4_ETR, USB_CRS_SYNC, SPI1_SCK, SPI3_SCK/I2S3_CK, USART2_TX, TIM3_ETR and FDCAN3_RX."+      },+      {+        "number": "57",+        "name": "PB4",+        "type": "bidirectional",+        "description": "FT_c I/O (5 V tolerant, USB Type-C PD capable) that defaults to the JTRST debug function after reset with its internal pull-up activated, with additional function UCPD1_CC2 and alternates TIM16_CH1, TIM3_CH1, SPI1_MISO, SPI3_MISO, USART2_RX and FDCAN3_TX."+      },+      {+        "number": "58",+        "name": "PB5",+        "type": "bidirectional",+        "description": "FT_f I/O (5 V tolerant, Fm+ capable) with alternates TIM16_BKIN, TIM3_CH2, TIM8_CH3N, I2C1_SMBA, SPI1_MOSI, SPI3_MOSI/I2S3_SD, USART2_CK, I2C3_SDA, FDCAN2_RX and TIM17_CH1."+      },+      {+        "number": "59",+        "name": "PB6",+        "type": "bidirectional",+        "description": "FT_c I/O (5 V tolerant, USB Type-C PD capable) with additional function UCPD1_CC1 and alternates TIM16_CH1N, TIM4_CH1, TIM8_CH1, USART1_TX, COMP4_OUT and FDCAN2_TX."+      },+      {+        "number": "60",+        "name": "PB7",+        "type": "bidirectional",+        "description": "FT_f I/O (5 V tolerant, Fm+ capable) with additional function PVD_IN and alternates TIM17_CH1N, TIM4_CH2, I2C4_SDA, I2C1_SDA, TIM8_BKIN, USART1_RX and COMP3_OUT."+      },+      {+        "number": "61",+        "name": "PB8-BOOT0",+        "type": "bidirectional",+        "description": "FT_f I/O (5 V tolerant, Fm+ capable) that is also the BOOT0 pin; it is recommended to set PB8 to a mode other than analog after startup to limit consumption if left unconnected, with alternates TIM16_CH1, TIM4_CH3, I2C1_SCL, USART3_RX and FDCAN1_RX."+      },+      {+        "number": "62",+        "name": "PB9",+        "type": "bidirectional",+        "description": "FT_f I/O (5 V tolerant, Fm+ capable) with alternates TIM17_CH1, TIM4_CH4, SAI1_D2, I2C1_SDA, IR_OUT, USART3_TX, COMP2_OUT, FDCAN1_TX and TIM8_CH3."+      },+      {+        "number": "63",+        "name": "VSS",+        "type": "power_in",+        "description": "Ground pin that must always be connected to the external ground within the permitted range."+      },+      {+        "number": "64",+        "name": "VDD",+        "type": "power_in",+        "description": "Digital supply pin; standard operating voltage is 1.71 V to 3.6 V and it must always be connected to the external supply."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.3",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.3",+        "primary_model": "claude-haiku-5-5",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: Pin mapping is taken from the LQFP64 column of Table 12 (pin definition) and cross-checked against t; PB8-BOOT0 is listed as a standard I/O with an FT_f structure in Table 12, but the BOOT0 boot-mode be; Pin types for VREF+, VSSA and VDDA are given only as the supply class S in Table 12; they are mapped"+        ],+        "pages_sent": 85,+        "cost_usd": 0.4713,+        "at": "2026-11-13T07:45:33"+      },+      "datasheet": {+        "url": "https://www.st.com/resource/en/datasheet/stm32g474ret6.pdf",+        "pages": 236,+        "sha256": "d493fe0ab22e61ff",+        "source_tier": "mfr"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 64,+        "described": 64,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    },+    "models_3d": [+      {+        "file": "stm32g474ret6.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          12.0,+          12.0,+          1.5+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "b0c827bc5c05552175d28affe44a5bd2ab45c9c36efff6ff07a74cc449b13db4",+        "checked": "2026-11-13",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "stm32g474ret6-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          12.0,+          12.0,+          1.5+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "36eadf98d817f80a8d5fc6c26e456a1fe1b2c61c256ec6b308529adfaa55cfc5",+        "checked": "2026-11-13",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ],+    "package_dims": {+      "package_code": "LQFP64",+      "source_page": 212,+      "D": {+        "nom_mm": 10.0,+        "range_mm": [+          null,+          null+        ]+      },+      "E1": {+        "nom_mm": 10.0,+        "range_mm": [+          null,+          null+        ]+      },+      "E": {+        "nom_mm": 12.0,+        "range_mm": [+          null,+          null+        ]+      },+      "e": {+        "nom_mm": 0.5,+        "range_mm": [+          null,+          null+        ]+      },+      "A": {+        "nom_mm": 1.6,+        "range_mm": [+          null,+          1.6+        ]+      },+      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",+      "model_check": {+        "file": "stm32g474ret6.step",+        "verdict": "PASS",+        "reasons": [+          "height and body within the datasheet's package drawing"+        ],+        "by": "factory/package_fit.py"+      }+    }+  } }
page.json+179−106
@@ -4,12 +4,14 @@   "slug": "stm32g474ret6",   "title": "STM32G474RET6",   "brief": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-64(10x10). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.",-  "version": "0.1.2",+  "version": "0.1.3",   "license": "CC-BY-SA-4.0",   "tags": [     "component",     "mcu",-    "stm32g474ret6"+    "stm32g474ret6",+    "factory-2.0.0",+    "extractor-text"   ],   "component": {     "mpn": "STM32G474RET6",@@ -22,401 +24,453 @@     "parts": {       "symbol": "stm32g474ret6.kicad_sym",       "footprint": "stm32g474ret6.kicad_mod",-      "model_3d": "stm32g474ret6-etched.glb",+      "model_3d": "stm32g474ret6-hero.glb",       "model_3d_plain": "stm32g474ret6.glb",       "model_3d_step": "stm32g474ret6-etched.step",       "model_3d_step_plain": "stm32g474ret6.step",       "lbr": "stm32g474ret6.lbr"     },-    "distributor_links": {},+    "distributor_links": {+      "digikey": "497-STM32G474RET6-ND",+      "mouser": "511-STM32G474RET6"+    },+    "distributor_check": {+      "checked_at": "2026-11-13T07:43:01Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "497-STM32G474RET6-ND",+        "status": "found"+      },+      "mouser": {+        "pn": "511-STM32G474RET6",+        "status": "found"+      }+    },+    "mcu": {+      "part_number": "STM32G474RET6",+      "series": "STM32G4",+      "subfamily": "STM32G474",+      "core": "Arm Cortex-M4",+      "frequency_mhz": 170,+      "flash_kb": 512,+      "ram_kb": 128,+      "io_count": 52,+      "package": "LQFP 64 10x10x1.4 mm",+      "marketing_status": "Active",+      "fpu": "Single-precision FPU",+      "supply_v_min": 1.71,+      "supply_v_max": 3.6,+      "temp_min_c": -40,+      "temp_max_c": 85,+      "adc_count": 5,+      "timers": 11,+      "in_distributor_stock": true,+      "product_folder": "/en/microcontrollers-microprocessors/stm32g474re.html",+      "source": "st.com portfolio grid CL1734"+    },     "pins": [       {         "number": "1",         "name": "VBAT",         "type": "power_in",-        "description": "Backup supply for the RTC, LSE 32 kHz crystal, and backup registers (~1.55-3.6 V). Powered from a coin cell or dedicated backup rail; can be tied to VDD if the backup domain is not used."+        "description": "Backup-domain supply for the RTC, backup registers and LSE, with a backup operating voltage of 1.55 V to 3.6 V."       },       {         "number": "2",         "name": "PC13",         "type": "bidirectional",-        "description": "Reset-state general-purpose I/O (5 V tolerant FT). Additional functions include WKUP2, RTC_TAMP1, RTC_TS, RTC_OUT1; alternate functions include TIM1_BKIN, TIM1_CH1N, TIM8_CH4N, EVENTOUT."+        "description": "5 V tolerant (FT) GPIO fed through the power switch, which sinks at most 3 mA, so output use is limited to 2 MHz with 30 pF maximum load and it must not source current to LEDs; alternates include TIM1_BKIN, TIM1_CH1N, TIM8_CH4N, with additional functions WKUP2, RTC_TAMP1, RTC_TS and RTC_OUT1."       },       {         "number": "3",         "name": "PC14-OSC32_IN",         "type": "bidirectional",-        "description": "GPIO PC14 by default (FT, 5 V tolerant); additional function is OSC32_IN input for the 32.768 kHz LSE crystal."+        "description": "5 V tolerant (FT) GPIO on the backup domain that doubles as the 32 kHz oscillator input OSC32_IN, with the same output limits as PC13 (2 MHz, 30 pF, no current sourcing)."       },       {         "number": "4",         "name": "PC15-OSC32_OUT",         "type": "bidirectional",-        "description": "GPIO PC15 by default (FT, 5 V tolerant); additional function is OSC32_OUT output for the 32.768 kHz LSE crystal."+        "description": "5 V tolerant (FT) GPIO on the backup domain that doubles as the 32 kHz oscillator output OSC32_OUT, with the same output limits as PC13 (2 MHz, 30 pF, no current sourcing)."       },       {         "number": "5",         "name": "PF0-OSC_IN",         "type": "bidirectional",-        "description": "GPIO PF0 by default (FT_fa, 5 V tolerant, Fm+ and analog switch); additional function is OSC_IN input for the main HSE 4-48 MHz crystal, also ADC1_IN10."+        "description": "FT_fa I/O (Fm+ capable) that doubles as the HSE oscillator input OSC_IN, with additional function ADC1_IN10 and alternates I2C2_SDA, SPI2_NSS/I2S2_WS and TIM1_CH3N."       },       {         "number": "6",         "name": "PF1-OSC_OUT",         "type": "bidirectional",-        "description": "GPIO PF1 by default (FT_a, 5 V tolerant, analog switch); additional function is OSC_OUT for the main HSE crystal, also ADC2_IN10, COMP3_INM."+        "description": "FT_a I/O that doubles as the HSE oscillator output OSC_OUT, with additional functions ADC2_IN10 and COMP3_INM and alternate SPI2_SCK/I2S2_CK."       },       {         "number": "7",         "name": "PG10-NRST",         "type": "bidirectional",-        "description": "Bidirectional device reset with internal weak pull-up (~40 kΩ). Drive low >20 µs to reset. Also usable as GPIO PG10 (FT) when NRST function disabled by option byte; alternate MCO/EVENTOUT."+        "description": "Bidirectional reset pin with an embedded weak pull-up resistor (NRST), also usable as FT GPIO PG10 with MCO alternate function."       },       {         "number": "8",         "name": "PC0",         "type": "bidirectional",-        "description": "GPIO (FT_a, 5 V tolerant, analog switch). Additional: ADC12_IN6, COMP3_INM. Alternate: LPTIM1_IN1, TIM1_CH1, LPUART1_RX, EVENTOUT."+        "description": "FT_a I/O (5 V tolerant) with additional functions ADC12_IN6 and COMP3_INM and alternates LPTIM1_IN1, TIM1_CH1 and LPUART1_RX."       },       {         "number": "9",         "name": "PC1",         "type": "bidirectional",-        "description": "GPIO (TT_a, 3.6 V tolerant, analog switch). Additional: ADC12_IN7, COMP3_INP. Alternate: LPTIM1_OUT, TIM1_CH2, LPUART1_TX, QUADSPI1_BK2_IO0, SAI1_SD_A, EVENTOUT."+        "description": "TT_a I/O (3.6 V tolerant) with additional functions ADC12_IN7 and COMP3_INP and alternates LPTIM1_OUT, TIM1_CH2, LPUART1_TX, QUADSPI1_BK2_IO0 and SAI1_SD_A."       },       {         "number": "10",         "name": "PC2",         "type": "bidirectional",-        "description": "GPIO (FT_a, 5 V tolerant, analog switch). Additional: ADC12_IN8. Alternate: LPTIM1_IN2, TIM1_CH3, COMP3_OUT, TIM20_CH2, QUADSPI1_BK2_IO1, EVENTOUT."+        "description": "FT_a I/O (5 V tolerant) with additional function ADC12_IN8 and alternates LPTIM1_IN2, TIM1_CH3, COMP3_OUT, TIM20_CH2 and QUADSPI1_BK2_IO1."       },       {         "number": "11",         "name": "PC3",         "type": "bidirectional",-        "description": "GPIO (TT_a, 3.6 V tolerant, analog switch). Additional: ADC12_IN9, OPAMP5_VINP. Alternate: LPTIM1_ETR, TIM1_CH4, SAI1_D1, TIM1_BKIN2, QUADSPI1_BK2_IO2, SAI1_SD_A, EVENTOUT."+        "description": "TT_a I/O (3.6 V tolerant) with additional functions ADC12_IN9 and OPAMP5_VINP and alternates LPTIM1_ETR, TIM1_CH4, SAI1_D1, TIM1_BKIN2 and QUADSPI1_BK2_IO2."       },       {         "number": "12",         "name": "PA0",         "type": "bidirectional",-        "description": "GPIO (TT_a, 3.6 V tolerant, analog switch). Additional: ADC12_IN1, COMP1_INM, COMP3_INP, RTC_TAMP2, WKUP1. Alternate: TIM2_CH1, TIM5_CH1, USART2_CTS, COMP1_OUT, TIM8_BKIN, TIM8_ETR, TIM2_ETR, EVENTOUT."+        "description": "TT_a I/O (3.6 V tolerant) with additional functions ADC12_IN1, COMP1_INM, COMP3_INP, RTC_TAMP2 and WKUP1, and alternates TIM2_CH1, TIM5_CH1, USART2_CTS, COMP1_OUT and TIM8_BKIN."       },       {         "number": "13",         "name": "PA1",         "type": "bidirectional",-        "description": "GPIO (TT_a, 3.6 V tolerant, analog switch). Additional: ADC12_IN2, COMP1_INP, OPAMP1_VINP, OPAMP3_VINP, OPAMP6_VINM. Alternate: RTC_REFIN, TIM2_CH2, TIM5_CH2, USART2_RTS_DE, TIM15_CH1N, EVENTOUT."+        "description": "TT_a I/O (3.6 V tolerant) with additional functions ADC12_IN2, COMP1_INP, OPAMP1_VINP, OPAMP3_VINP and OPAMP6_VINM, and alternates RTC_REFIN, TIM2_CH2, TIM5_CH2, USART2_RTS_DE and TIM15_CH1N."       },       {         "number": "14",         "name": "PA2",         "type": "bidirectional",-        "description": "GPIO (FT_a, 5 V tolerant, analog switch). Additional: ADC1_IN3, COMP2_INM, OPAMP1_VOUT, WKUP4/LSCO. Alternate: TIM2_CH3, TIM5_CH3, USART2_TX, COMP2_OUT, TIM15_CH1, QUADSPI1_BK1_NCS, LPUART1_TX, UCPD1_FRSTX, EVENTOUT."+        "description": "FT_a I/O (5 V tolerant) with additional functions ADC1_IN3, COMP2_INM, OPAMP1_VOUT and WKUP4/LSCO, and alternates TIM2_CH3, TIM5_CH3, USART2_TX, COMP2_OUT, LPUART1_TX and UCPD1_FRSTX."       },       {         "number": "15",         "name": "VSS",         "type": "power_in",-        "description": "Digital ground reference (0 V). Bond to solid ground plane."+        "description": "Ground pin that must always be connected to the external ground within the permitted range."       },       {         "number": "16",         "name": "VDD",         "type": "power_in",-        "description": "Digital supply, 1.71-3.6 V. Decouple locally with a 100 nF capacitor."+        "description": "Digital supply pin; standard operating voltage is 1.71 V to 3.6 V and it must always be connected to the external supply."       },       {         "number": "17",         "name": "PA3",         "type": "bidirectional",-        "description": "GPIO (TT_a, 3.6 V tolerant, analog switch). Additional: ADC1_IN4, COMP2_INP, OPAMP1_VINM/OPAMP1_VINP, OPAMP5_VINM. Alternate: TIM2_CH4, TIM5_CH4, SAI1_CK1, USART2_RX, TIM15_CH2, QUADSPI1_CLK, LPUART1_RX, SAI1_MCLK_A, EVENTOUT."+        "description": "TT_a I/O (3.6 V tolerant) with additional functions ADC1_IN4, COMP2_INP, OPAMP1_VINM/OPAMP1_VINP and OPAMP5_VINM, and alternates TIM2_CH4, TIM5_CH4, SAI1_CK1, USART2_RX and LPUART1_RX."       },       {         "number": "18",         "name": "PA4",         "type": "bidirectional",-        "description": "GPIO (TT_a, 3.6 V tolerant, analog switch). Additional: ADC2_IN17, DAC1_OUT1, COMP1_INM. Alternate: TIM3_CH2, SPI1_NSS, SPI3_NSS/I2S3_WS, USART2_CK, SAI1_FS_B, EVENTOUT."+        "description": "TT_a I/O (3.6 V tolerant) with additional functions ADC2_IN17, DAC1_OUT1 and COMP1_INM, and alternates TIM3_CH2, SPI1_NSS, SPI3_NSS/I2S3_WS, USART2_CK and SAI1_FS_B."       },       {         "number": "19",         "name": "PA5",         "type": "bidirectional",-        "description": "GPIO (TT_a, 3.6 V tolerant, analog switch). Additional: ADC2_IN13, DAC1_OUT2, COMP2_INM, OPAMP2_VINM. Alternate: TIM2_CH1, TIM2_ETR, SPI1_SCK, UCPD1_FRSTX, EVENTOUT."+        "description": "TT_a I/O (3.6 V tolerant) with additional functions ADC2_IN13, DAC1_OUT2, COMP2_INM and OPAMP2_VINM, and alternates TIM2_CH1, TIM2_ETR, SPI1_SCK and UCPD1_FRSTX."       },       {         "number": "20",         "name": "PA6",         "type": "bidirectional",-        "description": "GPIO (TT_a, 3.6 V tolerant, analog switch). Additional: ADC2_IN3, DAC2_OUT1, OPAMP2_VOUT. Alternate: TIM16_CH1, TIM3_CH1, TIM8_BKIN, SPI1_MISO, TIM1_BKIN, COMP1_OUT, QUADSPI1_BK1_IO3, LPUART1_CTS, EVENTOUT."+        "description": "TT_a I/O (3.6 V tolerant) with additional functions ADC2_IN3, DAC2_OUT1 and OPAMP2_VOUT, and alternates TIM16_CH1, TIM3_CH1, SPI1_MISO, COMP1_OUT and QUADSPI1_BK1_IO3."       },       {         "number": "21",         "name": "PA7",         "type": "bidirectional",-        "description": "GPIO (TT_a, 3.6 V tolerant, analog switch). Additional: ADC2_IN4, COMP2_INP, OPAMP1_VINP, OPAMP2_VINP. Alternate: TIM17_CH1, TIM3_CH2, TIM8_CH1N, SPI1_MOSI, TIM1_CH1N, COMP2_OUT, QUADSPI1_BK1_IO2, UCPD1_FRSTX, EVENTOUT."+        "description": "TT_a I/O (3.6 V tolerant) with additional functions ADC2_IN4, COMP2_INP, OPAMP1_VINP and OPAMP2_VINP, and alternates TIM17_CH1, TIM3_CH2, SPI1_MOSI, TIM1_CH1N, COMP2_OUT and QUADSPI1_BK1_IO2."       },       {         "number": "22",         "name": "PC4",         "type": "bidirectional",-        "description": "GPIO (FT_fa, 5 V tolerant, Fm+ and analog switch). Additional: ADC2_IN5. Alternate: TIM1_ETR, I2C2_SCL, USART1_TX, QUADSPI1_BK2_IO3, EVENTOUT."+        "description": "FT_fa I/O (5 V tolerant, Fm+ capable) with additional function ADC2_IN5 and alternates TIM1_ETR, I2C2_SCL, USART1_TX and QUADSPI1_BK2_IO3."       },       {         "number": "23",         "name": "PC5",         "type": "bidirectional",-        "description": "GPIO (TT_a, 3.6 V tolerant, analog switch). Additional: ADC2_IN11, OPAMP1_VINM, OPAMP2_VINM, WKUP5. Alternate: TIM15_BKIN, SAI1_D3, TIM1_CH4N, USART1_RX, HRTIM1_EEV10, EVENTOUT."+        "description": "TT_a I/O (3.6 V tolerant) with additional functions ADC2_IN11, OPAMP1_VINM, OPAMP2_VINM and WKUP5, and alternates TIM15_BKIN, SAI1_D3, TIM1_CH4N, USART1_RX and HRTIM1_EEV10."       },       {         "number": "24",         "name": "PB0",         "type": "bidirectional",-        "description": "GPIO (TT_a, 3.6 V tolerant, analog switch). Additional: ADC3_IN12/ADC1_IN15, COMP4_INP, OPAMP2_VINP, OPAMP3_VINP. Alternate: TIM3_CH3, TIM8_CH2N, TIM1_CH2N, QUADSPI1_BK1_IO1, HRTIM1_FLT5, UCPD1_FRSTX, EVENTOUT."+        "description": "TT_a I/O (3.6 V tolerant) with additional functions ADC3_IN12/ADC1_IN15, COMP4_INP, OPAMP2_VINP and OPAMP3_VINP, and alternates TIM3_CH3, TIM1_CH2N, QUADSPI1_BK1_IO1, HRTIM1_FLT5 and UCPD1_FRSTX."       },       {         "number": "25",         "name": "PB1",         "type": "bidirectional",-        "description": "GPIO (TT_a, 3.6 V tolerant, analog switch). Additional: ADC3_IN1/ADC1_IN12, COMP1_INP, OPAMP3_VOUT, OPAMP6_VINM. Alternate: TIM3_CH4, TIM8_CH3N, TIM1_CH3N, COMP4_OUT, QUADSPI1_BK1_IO0, LPUART1_RTS_DE, HRTIM1_SCOUT, EVENTOUT."+        "description": "TT_a I/O (3.6 V tolerant) with additional functions ADC3_IN1/ADC1_IN12, COMP1_INP, OPAMP3_VOUT and OPAMP6_VINM, and alternates TIM3_CH4, TIM1_CH3N, COMP4_OUT, QUADSPI1_BK1_IO0 and LPUART1_RTS_DE."       },       {         "number": "26",         "name": "PB2",         "type": "bidirectional",-        "description": "GPIO (TT_a, 3.6 V tolerant, analog switch). Additional: ADC2_IN12, COMP4_INM, OPAMP3_VINM. Alternate: RTC_OUT2, LPTIM1_OUT, TIM5_CH1, TIM20_CH1, I2C3_SMBA, QUADSPI1_BK2_IO1, HRTIM1_SCIN, EVENTOUT."+        "description": "TT_a I/O (3.6 V tolerant) with additional functions ADC2_IN12, COMP4_INM and OPAMP3_VINM, and alternates RTC_OUT2, LPTIM1_OUT, TIM5_CH1, TIM20_CH1, I2C3_SMBA, QUADSPI1_BK2_IO1 and HRTIM1_SCIN."       },       {         "number": "27",         "name": "VSSA",         "type": "power_in",-        "description": "Analog ground reference for ADCs, DACs, comparators, op-amps and VREFBUF. Tie to VSS with a clean star topology."+        "description": "Analog ground pin for the analog domain that supplies the ADCs, DACs, OPAMPs, COMPs and VREFBUF."       },       {         "number": "28",         "name": "VREF+",         "type": "power_in",-        "description": "External positive reference voltage for the ADCs and DACs (or VREFBUF output when the internal buffer is enabled). Range typically 2.0 V to VDDA. Additional function: VREFBUF_OUT."+        "description": "Positive reference voltage input for the ADCs and DACs (with VREFBUF_OUT as an additional function); VREF+ may exceed VDDA by no more than 0.4 V."       },       {         "number": "29",         "name": "VDDA",         "type": "power_in",-        "description": "Analog supply for ADCs, DACs, comparators, op-amps, VREFBUF and reset block, 1.62-3.6 V. Must be ≥ VDD and separately decoupled."+        "description": "Analog supply pin; ADC requires at least 1.62 V, DAC 1 MSPS/15 MSPS and OPAMP at least 1.8 V, VREFBUF used at least 2.4 V, with a maximum of 3.6 V."       },       {         "number": "30",         "name": "PB10",         "type": "bidirectional",-        "description": "GPIO (TT_a, 3.6 V tolerant, analog switch). Additional: COMP5_INM, OPAMP3_VINM, OPAMP4_VINM. Alternate: TIM2_CH3, USART3_TX, LPUART1_RX, QUADSPI1_CLK, TIM1_BKIN, HRTIM1_FLT3, SAI1_SCK_A, EVENTOUT."+        "description": "TT_a I/O (3.6 V tolerant) with additional functions COMP5_INM, OPAMP3_VINM and OPAMP4_VINM, and alternates TIM2_CH3, USART3_TX, LPUART1_RX, QUADSPI1_CLK, TIM1_BKIN and HRTIM1_FLT3."       },       {         "number": "31",         "name": "VSS",         "type": "power_in",-        "description": "Digital ground reference (0 V)."+        "description": "Ground pin that must always be connected to the external ground within the permitted range."       },       {         "number": "32",         "name": "VDD",         "type": "power_in",-        "description": "Digital supply, 1.71-3.6 V. Local 100 nF decoupling required."+        "description": "Digital supply pin; standard operating voltage is 1.71 V to 3.6 V and it must always be connected to the external supply."       },       {         "number": "33",         "name": "PB11",         "type": "bidirectional",-        "description": "GPIO (TT_a, 3.6 V tolerant, analog switch). Additional: ADC12_IN14, COMP6_INP, OPAMP4_VINP, OPAMP6_VOUT. Alternate: TIM2_CH4, USART3_RX, LPUART1_TX, QUADSPI1_BK1_NCS, HRTIM1_FLT4, EVENTOUT."+        "description": "TT_a I/O (3.6 V tolerant) with additional functions ADC12_IN14, COMP6_INP, OPAMP4_VINP and OPAMP6_VOUT, and alternates TIM2_CH4, USART3_RX, LPUART1_TX, QUADSPI1_BK1_NCS and HRTIM1_FLT4."       },       {         "number": "34",         "name": "PB12",         "type": "bidirectional",-        "description": "GPIO (TT_a, 3.6 V tolerant, analog switch). Additional: ADC4_IN3/ADC1_IN11, COMP7_INM, OPAMP4_VOUT, OPAMP6_VINP. Alternate: TIM5_ETR, I2C2_SMBA, SPI2_NSS/I2S2_WS, TIM1_BKIN, USART3_CK, LPUART1_RTS_DE, FDCAN2_RX, HRTIM1_CHC1, EVENTOUT."+        "description": "TT_a I/O (3.6 V tolerant) with additional functions ADC4_IN3/ADC1_IN11, COMP7_INM, OPAMP4_VOUT and OPAMP6_VINP, and alternates TIM5_ETR, I2C2_SMBA, SPI2_NSS/I2S2_WS, TIM1_BKIN, USART3_CK, FDCAN2_RX and HRTIM1_CHC1."       },       {         "number": "35",         "name": "PB13",         "type": "bidirectional",-        "description": "GPIO (TT_a, 3.6 V tolerant, analog switch). Additional: ADC3_IN5, COMP5_INP, OPAMP3_VINP, OPAMP4_VINP, OPAMP6_VINP. Alternate: SPI2_SCK/I2S2_CK, TIM1_CH1N, USART3_CTS, LPUART1_CTS, FDCAN2_TX, HRTIM1_CHC2, EVENTOUT."+        "description": "TT_a I/O (3.6 V tolerant) with additional functions ADC3_IN5, COMP5_INP, OPAMP3_VINP, OPAMP4_VINP and OPAMP6_VINP, and alternates SPI2_SCK/I2S2_CK, TIM1_CH1N, USART3_CTS, FDCAN2_TX and HRTIM1_CHC2."       },       {         "number": "36",         "name": "PB14",         "type": "bidirectional",-        "description": "GPIO (TT_a, 3.6 V tolerant, analog switch). Additional: ADC4_IN4/ADC1_IN5, COMP7_INP, OPAMP2_VINP, OPAMP5_VINP. Alternate: TIM15_CH1, SPI2_MISO, TIM1_CH2N, USART3_RTS_DE, COMP4_OUT, HRTIM1_CHD1, EVENTOUT."+        "description": "TT_a I/O (3.6 V tolerant) with additional functions ADC4_IN4/ADC1_IN5, COMP7_INP, OPAMP2_VINP and OPAMP5_VINP, and alternates TIM15_CH1, SPI2_MISO, TIM1_CH2N, USART3_RTS_DE, COMP4_OUT and HRTIM1_CHD1."       },       {         "number": "37",         "name": "PB15",         "type": "bidirectional",-        "description": "GPIO (TT_a, 3.6 V tolerant, analog switch). Additional: ADC4_IN5/ADC2_IN15, COMP6_INM, OPAMP5_VINM. Alternate: RTC_REFIN, TIM15_CH2, TIM15_CH1N, COMP3_OUT, TIM1_CH3N, SPI2_MOSI/I2S2_SD, HRTIM1_CHD2, EVENTOUT."+        "description": "TT_a I/O (3.6 V tolerant) with additional functions ADC4_IN5/ADC2_IN15, COMP6_INM and OPAMP5_VINM, and alternates RTC_REFIN, TIM15_CH2, TIM15_CH1N, TIM1_CH3N, SPI2_MOSI/I2S2_SD and HRTIM1_CHD2."       },       {         "number": "38",         "name": "PC6",         "type": "bidirectional",-        "description": "GPIO (FT_f, 5 V tolerant, Fm+). Alternate: TIM3_CH1, HRTIM1_EEV10, TIM8_CH1, I2S2_MCK, COMP6_OUT, I2C4_SCL, HRTIM1_CHF1, EVENTOUT."+        "description": "FT_f I/O (5 V tolerant, Fm+ capable) with alternates TIM3_CH1, HRTIM1_EEV10, TIM8_CH1, I2S2_MCK, COMP6_OUT, I2C4_SCL and HRTIM1_CHF1."       },       {         "number": "39",         "name": "PC7",         "type": "bidirectional",-        "description": "GPIO (FT_f, 5 V tolerant, Fm+). Alternate: TIM3_CH2, HRTIM1_FLT5, TIM8_CH2, I2S3_MCK, COMP5_OUT, I2C4_SDA, HRTIM1_CHF2, EVENTOUT."+        "description": "FT_f I/O (5 V tolerant, Fm+ capable) with alternates TIM3_CH2, HRTIM1_FLT5, TIM8_CH2, I2S3_MCK, COMP5_OUT, I2C4_SDA and HRTIM1_CHF2."       },       {         "number": "40",         "name": "PC8",         "type": "bidirectional",-        "description": "GPIO (FT_f, 5 V tolerant, Fm+). Alternate: TIM3_CH3, HRTIM1_CHE1, TIM8_CH3, TIM20_CH3, COMP7_OUT, I2C3_SCL, EVENTOUT."+        "description": "FT_f I/O (5 V tolerant, Fm+ capable) with alternates TIM3_CH3, HRTIM1_CHE1, TIM8_CH3, TIM20_CH3, COMP7_OUT and I2C3_SCL."       },       {         "number": "41",         "name": "PC9",         "type": "bidirectional",-        "description": "GPIO (FT_f, 5 V tolerant, Fm+). Alternate: TIM3_CH4, HRTIM1_CHE2, TIM8_CH4, I2SCKIN, TIM8_BKIN2, I2C3_SDA, EVENTOUT."+        "description": "FT_f I/O (5 V tolerant, Fm+ capable) with alternates TIM3_CH4, HRTIM1_CHE2, TIM8_CH4, I2SCKIN, TIM8_BKIN2 and I2C3_SDA."       },       {         "number": "42",         "name": "PA8",         "type": "bidirectional",-        "description": "GPIO (FT_a, 5 V tolerant, analog switch). Additional: ADC5_IN1, OPAMP5_VOUT. Alternate: MCO, I2C3_SCL, I2C2_SDA, I2S2_MCK, TIM1_CH1, USART1_CK, COMP7_OUT, TIM4_ETR, FDCAN3_RX, SAI1_CK2, HRTIM1_CHA1, SAI1_SCK_A, EVENTOUT."+        "description": "FT_a I/O (5 V tolerant) with additional functions ADC5_IN1 and OPAMP5_VOUT, and alternates MCO, I2C3_SCL, I2C2_SDA, TIM1_CH1, USART1_CK, COMP7_OUT, FDCAN3_RX and HRTIM1_CHA1."       },       {         "number": "43",         "name": "PA9",         "type": "bidirectional",-        "description": "GPIO (FT_fda, 5 V tolerant, Fm+, USB-C dead-battery, analog switch). Additional: ADC5_IN2, UCPD1_DBCC1. Alternate: I2C3_SMBA, I2C2_SCL, I2S3_MCK, TIM1_CH2, USART1_TX, COMP5_OUT, TIM15_BKIN, TIM2_CH3, HRTIM1_CHA2, SAI1_FS_A, EVENTOUT."+        "description": "FT_fda I/O (5 V tolerant, Fm+ capable, USB Type-C dead battery capable) with additional function UCPD1_DBCC1 and alternates I2C3_SMBA, I2C2_SCL, TIM1_CH2, USART1_TX, COMP5_OUT, TIM15_BKIN and HRTIM1_CHA2."       },       {         "number": "44",         "name": "PA10",         "type": "bidirectional",-        "description": "GPIO (FT_fda, 5 V tolerant, Fm+, USB-C dead-battery, analog switch). Additional: UCPD1_DBCC2. Alternate: TIM17_BKIN, USB_CRS_SYNC, I2C2_SMBA, SPI2_MISO, TIM1_CH3, USART1_RX, COMP6_OUT, TIM2_CH4, TIM8_BKIN, SAI1_D1, HRTIM1_CHB1, SAI1_SD_A, EVENTOUT."+        "description": "FT_fda I/O (5 V tolerant, Fm+ capable, USB Type-C dead battery capable) with additional function UCPD1_DBCC2 and alternates TIM17_BKIN, USB_CRS_SYNC, I2C2_SMBA, SPI2_MISO, TIM1_CH3, USART1_RX and HRTIM1_CHB1."       },       {         "number": "45",         "name": "PA11",         "type": "bidirectional",-        "description": "GPIO with USB function (FT_u, 5 V tolerant). Additional: USB_DM (D-). Alternate: SPI2_MOSI/I2S2_SD, TIM1_CH1N, USART1_CTS, COMP1_OUT, FDCAN1_RX, TIM4_CH1, TIM1_CH4, TIM1_BKIN2, HRTIM1_CHB2, EVENTOUT."+        "description": "FT_u I/O (5 V tolerant, USB function) with additional function USB_DM and alternates SPI2_MOSI/I2S2_SD, TIM1_CH1N, USART1_CTS, COMP1_OUT, FDCAN1_RX and HRTIM1_CHB2."       },       {         "number": "46",         "name": "PA12",         "type": "bidirectional",-        "description": "GPIO with USB function (FT_u, 5 V tolerant). Additional: USB_DP (D+). Alternate: TIM16_CH1, I2SCKIN, TIM1_CH2N, USART1_RTS_DE, COMP2_OUT, FDCAN1_TX, TIM4_CH2, TIM1_ETR, HRTIM1_FLT1, EVENTOUT."+        "description": "FT_u I/O (5 V tolerant, USB function) with additional function USB_DP and alternates TIM16_CH1, I2SCKIN, TIM1_CH2N, USART1_RTS_DE, COMP2_OUT, FDCAN1_TX and HRTIM1_FLT1."       },       {         "number": "47",         "name": "VSS",         "type": "power_in",-        "description": "Digital ground reference (0 V)."+        "description": "Ground pin that must always be connected to the external ground within the permitted range."       },       {         "number": "48",         "name": "VDD",         "type": "power_in",-        "description": "Digital supply, 1.71-3.6 V. Local 100 nF decoupling required."+        "description": "Digital supply pin; standard operating voltage is 1.71 V to 3.6 V and it must always be connected to the external supply."       },       {         "number": "49",         "name": "PA13",         "type": "bidirectional",-        "description": "SWDIO / JTMS in reset state (FT_f, 5 V tolerant, Fm+). Alternate: SWDIO-JTMS, TIM16_CH1N, I2C4_SCL, I2C1_SCL, IR_OUT, USART3_CTS, TIM4_CH3, SAI1_SD_B, EVENTOUT."+        "description": "FT_f I/O (5 V tolerant, Fm+ capable) that defaults to the SWDIO-JTMS debug function after reset with its internal pull-up activated, and also has alternates TIM16_CH1N, I2C4_SCL, I2C1_SCL, IR_OUT, USART3_CTS and TIM4_CH3."       },       {         "number": "50",         "name": "PA14",         "type": "bidirectional",-        "description": "SWCLK / JTCK in reset state (FT_f, 5 V tolerant, Fm+). Alternate: SWCLK-JTCK, LPTIM1_OUT, I2C4_SMBA, I2C1_SDA, TIM8_CH2, TIM1_BKIN, USART2_TX, SAI1_FS_B, EVENTOUT."+        "description": "FT_f I/O (5 V tolerant, Fm+ capable) that defaults to the SWCLK-JTCK debug function after reset with its internal pull-down activated, and also has alternates LPTIM1_OUT, I2C4_SMBA, I2C1_SDA, TIM8_CH2, TIM1_BKIN and USART2_TX."       },       {         "number": "51",         "name": "PA15",         "type": "bidirectional",-        "description": "JTDI in reset state (FT_f, 5 V tolerant, Fm+). Alternate: JTDI, TIM2_CH1, TIM8_CH1, I2C1_SCL, SPI1_NSS, SPI3_NSS/I2S3_WS, USART2_RX, UART4_RTS_DE, TIM1_BKIN, FDCAN3_TX, HRTIM1_FLT2, TIM2_ETR, EVENTOUT."+        "description": "FT_f I/O (5 V tolerant, Fm+ capable) that defaults to the JTDI debug function after reset with its internal pull-up activated, and also has alternates TIM2_CH1, TIM8_CH1, I2C1_SCL, SPI1_NSS, SPI3_NSS/I2S3_WS, USART2_RX, TIM1_BKIN and FDCAN3_TX."       },       {         "number": "52",         "name": "PC10",         "type": "bidirectional",-        "description": "GPIO (FT, 5 V tolerant). Alternate: TIM8_CH1N, UART4_TX, SPI3_SCK/I2S3_CK, USART3_TX, HRTIM1_FLT6, EVENTOUT."+        "description": "FT I/O (5 V tolerant) with alternates TIM8_CH1N, UART4_TX, SPI3_SCK/I2S3_CK, USART3_TX and HRTIM1_FLT6."       },       {         "number": "53",         "name": "PC11",         "type": "bidirectional",-        "description": "GPIO (FT_f, 5 V tolerant, Fm+). Alternate: HRTIM1_EEV2, TIM8_CH2N, UART4_RX, SPI3_MISO, USART3_RX, I2C3_SDA, EVENTOUT."+        "description": "FT_f I/O (5 V tolerant, Fm+ capable) with alternates HRTIM1_EEV2, TIM8_CH2N, UART4_RX, SPI3_MISO, USART3_RX and I2C3_SDA."       },       {         "number": "54",         "name": "PC12",         "type": "bidirectional",-        "description": "GPIO (FT, 5 V tolerant). Alternate: TIM5_CH2, HRTIM1_EEV1, TIM8_CH3N, UART5_TX, SPI3_MOSI/I2S3_SD, USART3_CK, UCPD1_FRSTX, EVENTOUT."+        "description": "FT I/O (5 V tolerant) with alternates TIM5_CH2, HRTIM1_EEV1, TIM8_CH3N, UART5_TX, SPI3_MOSI/I2S3_SD, USART3_CK and UCPD1_FRSTX."       },       {         "number": "55",         "name": "PD2",         "type": "bidirectional",-        "description": "GPIO (FT, 5 V tolerant). Alternate: TIM3_ETR, TIM8_BKIN, UART5_RX, EVENTOUT."+        "description": "FT I/O (5 V tolerant) with alternates TIM3_ETR, TIM8_BKIN and UART5_RX."       },       {         "number": "56",         "name": "PB3",         "type": "bidirectional",-        "description": "JTDO / TRACESWO in reset state (FT, 5 V tolerant). Alternate: JTDO-TRACESWO, TIM2_CH2, TIM4_ETR, UCPD1_CRS_SYNC, TIM8_CH1N, SPI1_SCK, SPI3_SCK/I2S3_CK, USART2_TX, TIM3_ETR, FDCAN3_RX, HRTIM1_SCOUT, HRTIM1_EEV9, SAI1_SCK_B, EVENTOUT."+        "description": "FT I/O (5 V tolerant) that defaults to the JTDO-TRACESWO debug function after reset, with alternates TIM2_CH2, TIM4_ETR, USB_CRS_SYNC, SPI1_SCK, SPI3_SCK/I2S3_CK, USART2_TX, TIM3_ETR and FDCAN3_RX."       },       {         "number": "57",         "name": "PB4",         "type": "bidirectional",-        "description": "JTRST in reset state (FT_c, 5 V tolerant, USB Type-C PD capable). Additional: UCPD1_CC2. Alternate: JTRST, TIM16_CH1, TIM3_CH1, TIM8_CH2N, SPI1_MISO, SPI3_MISO, USART2_RX, UART5_RTS_DE, TIM17_BKIN, FDCAN3_TX, HRTIM1_EEV7, SAI1_MCLK_B, EVENTOUT."+        "description": "FT_c I/O (5 V tolerant, USB Type-C PD capable) that defaults to the JTRST debug function after reset with its internal pull-up activated, with additional function UCPD1_CC2 and alternates TIM16_CH1, TIM3_CH1, SPI1_MISO, SPI3_MISO, USART2_RX and FDCAN3_TX."       },       {         "number": "58",         "name": "PB5",         "type": "bidirectional",-        "description": "GPIO (FT_f, 5 V tolerant, Fm+). Alternate: TIM16_BKIN, TIM3_CH2, TIM8_CH3N, I2C1_SMBA, SPI1_MOSI, SPI3_MOSI/I2S3_SD, USART2_CK, I2C3_SDA, FDCAN2_RX, TIM17_CH1, LPTIM1_IN1, SAI1_SD_B, HRTIM1_EEV6, UART5_CTS, EVENTOUT."+        "description": "FT_f I/O (5 V tolerant, Fm+ capable) with alternates TIM16_BKIN, TIM3_CH2, TIM8_CH3N, I2C1_SMBA, SPI1_MOSI, SPI3_MOSI/I2S3_SD, USART2_CK, I2C3_SDA, FDCAN2_RX and TIM17_CH1."       },       {         "number": "59",         "name": "PB6",         "type": "bidirectional",-        "description": "GPIO (FT_c, 5 V tolerant, USB Type-C PD capable). Additional: UCPD1_CC1. Alternate: TIM16_CH1N, TIM4_CH1, TIM8_CH1, TIM8_ETR, USART1_TX, COMP4_OUT, FDCAN2_TX, TIM8_BKIN2, LPTIM1_ETR, HRTIM1_SCIN, HRTIM1_EEV4, SAI1_FS_B, EVENTOUT."+        "description": "FT_c I/O (5 V tolerant, USB Type-C PD capable) with additional function UCPD1_CC1 and alternates TIM16_CH1N, TIM4_CH1, TIM8_CH1, USART1_TX, COMP4_OUT and FDCAN2_TX."       },       {         "number": "60",         "name": "PB7",         "type": "bidirectional",-        "description": "GPIO (FT_f, 5 V tolerant, Fm+). Additional: PVD_IN. Alternate: TIM17_CH1N, TIM4_CH2, I2C4_SDA, I2C1_SDA, TIM8_BKIN, USART1_RX, COMP3_OUT, TIM3_CH4, LPTIM1_IN2, FMC_NL, HRTIM1_EEV3, UART4_CTS, EVENTOUT."+        "description": "FT_f I/O (5 V tolerant, Fm+ capable) with additional function PVD_IN and alternates TIM17_CH1N, TIM4_CH2, I2C4_SDA, I2C1_SDA, TIM8_BKIN, USART1_RX and COMP3_OUT."       },       {         "number": "61",         "name": "PB8-BOOT0",         "type": "bidirectional",-        "description": "Multiplexed BOOT0 pin and GPIO PB8 (FT_f, 5 V tolerant, Fm+). At reset the pin selects the boot memory (main Flash / system memory / SRAM) depending on BOOT_SEL and nBOOT1 option bytes; afterwards operates as GPIO PB8. Alternate: TIM16_CH1, TIM4_CH3, SAI1_CK1, I2C1_SCL, USART3_RX, COMP1_OUT, FDCAN1_RX, TIM8_CH2, TIM1_BKIN, HRTIM1_EEV8, SAI1_MCLK_A, EVENTOUT."+        "description": "FT_f I/O (5 V tolerant, Fm+ capable) that is also the BOOT0 pin; it is recommended to set PB8 to a mode other than analog after startup to limit consumption if left unconnected, with alternates TIM16_CH1, TIM4_CH3, I2C1_SCL, USART3_RX and FDCAN1_RX."       },       {         "number": "62",         "name": "PB9",         "type": "bidirectional",-        "description": "GPIO (FT_f, 5 V tolerant, Fm+). Alternate: TIM17_CH1, TIM4_CH4, SAI1_D2, I2C1_SDA, IR_OUT, USART3_TX, COMP2_OUT, FDCAN1_TX, TIM8_CH3, TIM1_CH3N, HRTIM1_EEV5, SAI1_FS_A, EVENTOUT."+        "description": "FT_f I/O (5 V tolerant, Fm+ capable) with alternates TIM17_CH1, TIM4_CH4, SAI1_D2, I2C1_SDA, IR_OUT, USART3_TX, COMP2_OUT, FDCAN1_TX and TIM8_CH3."       },       {         "number": "63",         "name": "VSS",         "type": "power_in",-        "description": "Digital ground reference (0 V)."+        "description": "Ground pin that must always be connected to the external ground within the permitted range."       },       {         "number": "64",         "name": "VDD",         "type": "power_in",-        "description": "Digital supply, 1.71-3.6 V. Local 100 nF decoupling required."+        "description": "Digital supply pin; standard operating voltage is 1.71 V to 3.6 V and it must always be connected to the external supply."       }     ],     "provenance": {-      "extractor": "ds2sf",+      "extractor": "extract_pins 0.3",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.3",+        "primary_model": "claude-haiku-5-5",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: Pin mapping is taken from the LQFP64 column of Table 12 (pin definition) and cross-checked against t; PB8-BOOT0 is listed as a standard I/O with an FT_f structure in Table 12, but the BOOT0 boot-mode be; Pin types for VREF+, VSSA and VDDA are given only as the supply class S in Table 12; they are mapped"+        ],+        "pages_sent": 85,+        "cost_usd": 0.4713,+        "at": "2026-11-13T07:45:33"+      },       "datasheet": {         "url": "https://www.st.com/resource/en/datasheet/stm32g474ret6.pdf",         "pages": 236,@@ -428,42 +482,13 @@         "total": 64,         "described": 64,         "cites_pages": true,-        "refuses_to_fabricate": true,-        "checked_against": "STMicroelectronics STM32_open_pin_data (STM32G474R(B-C-E)Tx.xml, LQFP64)"-      },-      "correction": {-        "at": "2026-10-01",-        "what": "2 of 64 pins corrected",-        "how": "pinout replaced from STMicroelectronics STM32_open_pin_data (STM32G474R(B-C-E)Tx.xml, LQFP64); the previous pinout came from an earlier extraction",-        "symbol": "regenerated from the corrected pinout"+        "refuses_to_fabricate": true       }     },     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"     },-    "mcu": {-      "part_number": "STM32G474RET6",-      "series": "STM32G4",-      "subfamily": "STM32G474",-      "core": "Arm Cortex-M4",-      "frequency_mhz": 170,-      "flash_kb": 512,-      "ram_kb": 128,-      "io_count": 52,-      "package": "LQFP 64 10x10x1.4 mm",-      "marketing_status": "Active",-      "fpu": "Single-precision FPU",-      "supply_v_min": 1.71,-      "supply_v_max": 3.6,-      "temp_min_c": -40,-      "temp_max_c": 85,-      "adc_count": 5,-      "timers": 11,-      "in_distributor_stock": false,-      "product_folder": "/en/microcontrollers-microprocessors/stm32g474re.html",-      "source": "st.com portfolio grid CL1734"-    },     "models_3d": [       {         "file": "stm32g474ret6.step",@@ -481,7 +506,7 @@         "centre_offset_mm": 0,         "footprint_binding": "identity",         "sha256": "b0c827bc5c05552175d28affe44a5bd2ab45c9c36efff6ff07a74cc449b13db4",-        "checked": "2026-10-07",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -499,11 +524,59 @@         "zmin_mm": 0,         "centre_offset_mm": 0,         "footprint_binding": "identity",-        "sha256": "e2a809b0c0e778376cb93de5e77310c99c3cd0d78f86b9be1241f1ee9e673354",-        "checked": "2026-11-12",+        "sha256": "36eadf98d817f80a8d5fc6c26e456a1fe1b2c61c256ec6b308529adfaa55cfc5",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }-    ]+    ],+    "package_dims": {+      "package_code": "LQFP64",+      "source_page": 212,+      "D": {+        "nom_mm": 10,+        "range_mm": [+          null,+          null+        ]+      },+      "E1": {+        "nom_mm": 10,+        "range_mm": [+          null,+          null+        ]+      },+      "E": {+        "nom_mm": 12,+        "range_mm": [+          null,+          null+        ]+      },+      "e": {+        "nom_mm": 0.5,+        "range_mm": [+          null,+          null+        ]+      },+      "A": {+        "nom_mm": 1.6,+        "range_mm": [+          null,+          1.6+        ]+      },+      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",+      "model_check": {+        "file": "stm32g474ret6.step",+        "verdict": "PASS",+        "reasons": [+          "height and body within the datasheet's package drawing"+        ],+        "by": "factory/package_fit.py"+      }+    }   },   "metadata": {     "specs": {@@ -551,8 +624,8 @@     "docs/stm32g474ret6-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html",-    "stm32g474ret6-etched.glb",-    "stm32g474ret6-etched.step"+    "stm32g474ret6-hero.glb",+    "stm32g474ret6-hero.overlay.json"   ],   "visibility": "public",   "variants": [@@ -626,6 +699,6 @@     }   ],   "updated_at": "2026-09-25T08:51:28.874Z",-  "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-64(10x10). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-64(10x10). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.",   "org": "adom" }\ No newline at end of file
stm32g474ret6-hero.glbadded
⋯ 1 unchanged line ⋯
stm32g474ret6-hero.overlay.jsonadded+1492
@@ -0,0 +1,1492 @@+{+  "spec": "adom-hero 1.4",+  "mpn": "STM32G474RET6",+  "kind": "component + footprint reference art",+  "board_use": false,+  "plane_z_mm": -0.02,+  "units": "metre",+  "upAxis": "Z",+  "layers": {+    "pad_outlines": {+      "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+      "rgba": [+        0.0,+        0.902,+        0.863,+        0.5+      ],+      "pads": 64,+      "span_mm": 12.9,+      "dash_mm": 0.3225,+      "gap_mm": 0.1935,+      "pad_stroke_mm": 0.0774+    },+    "silkscreen": {+      "material": "Silkscreen reference lines - 30 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.3+      ],+      "footprint_items": 9,+      "pin1": {+        "source": "footprint silkscreen",+        "pad": "1"+      }+    },+    "signal_names": {+      "material": "Signal names - 50 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.5+      ],+      "font": "DejaVu Sans Mono",+      "labels": 64,+      "sides": "top + mirrored underside (single-sided)",+      "fallback_to_pad_number": 0+    }+  },+  "align": {+    "ok": true,+    "centre_offset_mm": 0.0,+    "tolerance_mm": 1.032,+    "orientation_flipped": false,+    "contacts_bbox_mm": [+      -6.0,+      6.0,+      -6.0,+      6.0+    ],+    "pads_bbox_mm": [+      -6.45,+      6.45,+      -6.45,+      6.45+    ],+    "seating_z_mm": -0.0+  },+  "sources": {+    "glb": "stm32g474ret6-etched.glb",+    "glb_sha256": "53627846bb273819e5f6a98f92538e973bcf6d2163ccde431a6a0e35e7c51941",+    "footprint": "stm32g474ret6.kicad_mod",+    "footprint_sha256": "e587844ec861b0f356a5ced3167bf2974fe5b2739e28522a4c975f1c248f1774",+    "pins": "page.json component.pins",+    "pins_sha256": "b95c0b8a36dceddfafbf87facbfc1187261e69e0c7d4029dfbfc807d816b972e"+  },+  "generator": "adom-wiki 1.8.24 (component_hero)",+  "labels": [+    {+      "pad": "1",+      "text": "VBAT",+      "x": -6.55,+      "y": -3.75,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "2",+      "text": "PC13",+      "x": -6.55,+      "y": -3.25,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "3",+      "text": "PC14-OSC32_IN",+      "x": -6.55,+      "y": -2.75,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "4",+      "text": "PC15-OSC32_OUT",+      "x": -6.55,+      "y": -2.25,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "5",+      "text": "PF0-OSC_IN",+      "x": -6.55,+      "y": -1.75,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "6",+      "text": "PF1-OSC_OUT",+      "x": -6.55,+      "y": -1.25,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "7",+      "text": "PG10-NRST",+      "x": -6.55,+      "y": -0.75,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "8",+      "text": "PC0",+      "x": -6.55,+      "y": -0.25,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "9",+      "text": "PC1",+      "x": -6.55,+      "y": 0.25,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "10",+      "text": "PC2",+      "x": -6.55,+      "y": 0.75,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "11",+      "text": "PC3",+      "x": -6.55,+      "y": 1.25,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "12",+      "text": "PA0",+      "x": -6.55,+      "y": 1.75,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "13",+      "text": "PA1",+      "x": -6.55,+      "y": 2.25,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "14",+      "text": "PA2",+      "x": -6.55,+      "y": 2.75,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "15",+      "text": "VSS",+      "x": -6.55,+      "y": 3.25,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "16",+      "text": "VDD",+      "x": -6.55,+      "y": 3.75,+      "align": "right",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "17",+      "text": "PA3",+      "x": -3.75,+      "y": 6.55,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "18",+      "text": "PA4",+      "x": -3.25,+      "y": 6.55,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "19",+      "text": "PA5",+      "x": -2.75,+      "y": 6.55,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "20",+      "text": "PA6",+      "x": -2.25,+      "y": 6.55,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "21",+      "text": "PA7",+      "x": -1.75,+      "y": 6.55,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "22",+      "text": "PC4",+      "x": -1.25,+      "y": 6.55,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "23",+      "text": "PC5",+      "x": -0.75,+      "y": 6.55,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "24",+      "text": "PB0",+      "x": -0.25,+      "y": 6.55,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "25",+      "text": "PB1",+      "x": 0.25,+      "y": 6.55,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "26",+      "text": "PB2",+      "x": 0.75,+      "y": 6.55,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "27",+      "text": "VSSA",+      "x": 1.25,+      "y": 6.55,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "28",+      "text": "VREF+",+      "x": 1.75,+      "y": 6.55,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "29",+      "text": "VDDA",+      "x": 2.25,+      "y": 6.55,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "30",+      "text": "PB10",+      "x": 2.75,+      "y": 6.55,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "31",+      "text": "VSS",+      "x": 3.25,+      "y": 6.55,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "32",+      "text": "VDD",+      "x": 3.75,+      "y": 6.55,+      "align": "right",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "33",+      "text": "PB11",+      "x": 6.55,+      "y": 3.75,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "34",+      "text": "PB12",+      "x": 6.55,+      "y": 3.25,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "35",+      "text": "PB13",+      "x": 6.55,+      "y": 2.75,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "36",+      "text": "PB14",+      "x": 6.55,+      "y": 2.25,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "37",+      "text": "PB15",+      "x": 6.55,+      "y": 1.75,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "38",+      "text": "PC6",+      "x": 6.55,+      "y": 1.25,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "39",+      "text": "PC7",+      "x": 6.55,+      "y": 0.75,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "40",+      "text": "PC8",+      "x": 6.55,+      "y": 0.25,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "41",+      "text": "PC9",+      "x": 6.55,+      "y": -0.25,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "42",+      "text": "PA8",+      "x": 6.55,+      "y": -0.75,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "43",+      "text": "PA9",+      "x": 6.55,+      "y": -1.25,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "44",+      "text": "PA10",+      "x": 6.55,+      "y": -1.75,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "45",+      "text": "PA11",+      "x": 6.55,+      "y": -2.25,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "46",+      "text": "PA12",+      "x": 6.55,+      "y": -2.75,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "47",+      "text": "VSS",+      "x": 6.55,+      "y": -3.25,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "48",+      "text": "VDD",+      "x": 6.55,+      "y": -3.75,+      "align": "left",+      "vertical": false,+      "h": 0.25+    },+    {+      "pad": "49",+      "text": "PA13",+      "x": 3.75,+      "y": -6.55,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "50",+      "text": "PA14",+      "x": 3.25,+      "y": -6.55,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "51",+      "text": "PA15",+      "x": 2.75,+      "y": -6.55,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "52",+      "text": "PC10",+      "x": 2.25,+      "y": -6.55,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "53",+      "text": "PC11",+      "x": 1.75,+      "y": -6.55,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "54",+      "text": "PC12",+      "x": 1.25,+      "y": -6.55,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "55",+      "text": "PD2",+      "x": 0.75,+      "y": -6.55,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "56",+      "text": "PB3",+      "x": 0.25,+      "y": -6.55,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "57",+      "text": "PB4",+      "x": -0.25,+      "y": -6.55,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "58",+      "text": "PB5",+      "x": -0.75,+      "y": -6.55,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "59",+      "text": "PB6",+      "x": -1.25,+      "y": -6.55,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "60",+      "text": "PB7",+      "x": -1.75,+      "y": -6.55,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "61",+      "text": "PB8-BOOT0",+      "x": -2.25,+      "y": -6.55,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "62",+      "text": "PB9",+      "x": -2.75,+      "y": -6.55,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "63",+      "text": "VSS",+      "x": -3.25,+      "y": -6.55,+      "align": "left",+      "vertical": true,+      "h": 0.25+    },+    {+      "pad": "64",+      "text": "VDD",+      "x": -3.75,+      "y": -6.55,+      "align": "left",+      "vertical": true,+      "h": 0.25+    }+  ],+  "pads": [+    {+      "number": "1",+      "shape": "roundrect",+      "center_mm": [+        -5.675,+        -3.75+      ],+      "size_mm": [+        1.55,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "2",+      "shape": "roundrect",+      "center_mm": [+        -5.675,+        -3.25+      ],+      "size_mm": [+        1.55,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "3",+      "shape": "roundrect",+      "center_mm": [+        -5.675,+        -2.75+      ],+      "size_mm": [+        1.55,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "4",+      "shape": "roundrect",+      "center_mm": [+        -5.675,+        -2.25+      ],+      "size_mm": [+        1.55,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "5",+      "shape": "roundrect",+      "center_mm": [+        -5.675,+        -1.75+      ],+      "size_mm": [+        1.55,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "6",+      "shape": "roundrect",+      "center_mm": [+        -5.675,+        -1.25+      ],+      "size_mm": [+        1.55,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "7",+      "shape": "roundrect",+      "center_mm": [+        -5.675,+        -0.75+      ],+      "size_mm": [+        1.55,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "8",+      "shape": "roundrect",+      "center_mm": [+        -5.675,+        -0.25+      ],+      "size_mm": [+        1.55,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "9",+      "shape": "roundrect",+      "center_mm": [+        -5.675,+        0.25+      ],+      "size_mm": [+        1.55,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "10",+      "shape": "roundrect",+      "center_mm": [+        -5.675,+        0.75+      ],+      "size_mm": [+        1.55,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "11",+      "shape": "roundrect",+      "center_mm": [+        -5.675,+        1.25+      ],+      "size_mm": [+        1.55,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "12",+      "shape": "roundrect",+      "center_mm": [+        -5.675,+        1.75+      ],+      "size_mm": [+        1.55,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "13",+      "shape": "roundrect",+      "center_mm": [+        -5.675,+        2.25+      ],+      "size_mm": [+        1.55,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "14",+      "shape": "roundrect",+      "center_mm": [+        -5.675,+        2.75+      ],+      "size_mm": [+        1.55,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "15",+      "shape": "roundrect",+      "center_mm": [+        -5.675,+        3.25+      ],+      "size_mm": [+        1.55,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "16",+      "shape": "roundrect",+      "center_mm": [+        -5.675,+        3.75+      ],+      "size_mm": [+        1.55,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "17",+      "shape": "roundrect",+      "center_mm": [+        -3.75,+        5.675+      ],+      "size_mm": [+        0.3,+        1.55+      ],+      "rot": 0.0+    },+    {+      "number": "18",+      "shape": "roundrect",+      "center_mm": [+        -3.25,+        5.675+      ],+      "size_mm": [+        0.3,+        1.55+      ],+      "rot": 0.0+    },+    {+      "number": "19",+      "shape": "roundrect",+      "center_mm": [+        -2.75,+        5.675+      ],+      "size_mm": [+        0.3,+        1.55+      ],+      "rot": 0.0+    },+    {+      "number": "20",+      "shape": "roundrect",+      "center_mm": [+        -2.25,+        5.675+      ],+      "size_mm": [+        0.3,+        1.55+      ],+      "rot": 0.0+    },+    {+      "number": "21",+      "shape": "roundrect",+      "center_mm": [+        -1.75,+        5.675+      ],+      "size_mm": [+        0.3,+        1.55+      ],+      "rot": 0.0+    },+    {+      "number": "22",+      "shape": "roundrect",+      "center_mm": [+        -1.25,+        5.675+      ],+      "size_mm": [+        0.3,+        1.55+      ],+      "rot": 0.0+    },+    {+      "number": "23",+      "shape": "roundrect",+      "center_mm": [+        -0.75,+        5.675+      ],+      "size_mm": [+        0.3,+        1.55+      ],+      "rot": 0.0+    },+    {+      "number": "24",+      "shape": "roundrect",+      "center_mm": [+        -0.25,+        5.675+      ],+      "size_mm": [+        0.3,+        1.55+      ],+      "rot": 0.0+    },+    {+      "number": "25",+      "shape": "roundrect",+      "center_mm": [+        0.25,+        5.675+      ],+      "size_mm": [+        0.3,+        1.55+      ],+      "rot": 0.0+    },+    {+      "number": "26",+      "shape": "roundrect",+      "center_mm": [+        0.75,+        5.675+      ],+      "size_mm": [+        0.3,+        1.55+      ],+      "rot": 0.0+    },+    {+      "number": "27",+      "shape": "roundrect",+      "center_mm": [+        1.25,+        5.675+      ],+      "size_mm": [+        0.3,+        1.55+      ],+      "rot": 0.0+    },+    {+      "number": "28",+      "shape": "roundrect",+      "center_mm": [+        1.75,+        5.675+      ],+      "size_mm": [+        0.3,+        1.55+      ],+      "rot": 0.0+    },+    {+      "number": "29",+      "shape": "roundrect",+      "center_mm": [+        2.25,+        5.675+      ],+      "size_mm": [+        0.3,+        1.55+      ],+      "rot": 0.0+    },+    {+      "number": "30",+      "shape": "roundrect",+      "center_mm": [+        2.75,+        5.675+      ],+      "size_mm": [+        0.3,+        1.55+      ],+      "rot": 0.0+    },+    {+      "number": "31",+      "shape": "roundrect",+      "center_mm": [+        3.25,+        5.675+      ],+      "size_mm": [+        0.3,+        1.55+      ],+      "rot": 0.0+    },+    {+      "number": "32",+      "shape": "roundrect",+      "center_mm": [+        3.75,+        5.675+      ],+      "size_mm": [+        0.3,+        1.55+      ],+      "rot": 0.0+    },+    {+      "number": "33",+      "shape": "roundrect",+      "center_mm": [+        5.675,+        3.75+      ],+      "size_mm": [+        1.55,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "34",+      "shape": "roundrect",+      "center_mm": [+        5.675,+        3.25+      ],+      "size_mm": [+        1.55,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "35",+      "shape": "roundrect",+      "center_mm": [+        5.675,+        2.75+      ],+      "size_mm": [+        1.55,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "36",+      "shape": "roundrect",+      "center_mm": [+        5.675,+        2.25+      ],+      "size_mm": [+        1.55,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "37",+      "shape": "roundrect",+      "center_mm": [+        5.675,+        1.75+      ],+      "size_mm": [+        1.55,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "38",+      "shape": "roundrect",+      "center_mm": [+        5.675,+        1.25+      ],+      "size_mm": [+        1.55,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "39",+      "shape": "roundrect",+      "center_mm": [+        5.675,+        0.75+      ],+      "size_mm": [+        1.55,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "40",+      "shape": "roundrect",+      "center_mm": [+        5.675,+        0.25+      ],+      "size_mm": [+        1.55,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "41",+      "shape": "roundrect",+      "center_mm": [+        5.675,+        -0.25+      ],+      "size_mm": [+        1.55,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "42",+      "shape": "roundrect",+      "center_mm": [+        5.675,+        -0.75+      ],+      "size_mm": [+        1.55,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "43",+      "shape": "roundrect",+      "center_mm": [+        5.675,+        -1.25+      ],+      "size_mm": [+        1.55,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "44",+      "shape": "roundrect",+      "center_mm": [+        5.675,+        -1.75+      ],+      "size_mm": [+        1.55,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "45",+      "shape": "roundrect",+      "center_mm": [+        5.675,+        -2.25+      ],+      "size_mm": [+        1.55,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "46",+      "shape": "roundrect",+      "center_mm": [+        5.675,+        -2.75+      ],+      "size_mm": [+        1.55,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "47",+      "shape": "roundrect",+      "center_mm": [+        5.675,+        -3.25+      ],+      "size_mm": [+        1.55,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "48",+      "shape": "roundrect",+      "center_mm": [+        5.675,+        -3.75+      ],+      "size_mm": [+        1.55,+        0.3+      ],+      "rot": 0.0+    },+    {+      "number": "49",+      "shape": "roundrect",+      "center_mm": [+        3.75,+        -5.675+      ],+      "size_mm": [+        0.3,+        1.55+      ],+      "rot": 0.0+    },+    {+      "number": "50",+      "shape": "roundrect",+      "center_mm": [+        3.25,+        -5.675+      ],+      "size_mm": [+        0.3,+        1.55+      ],+      "rot": 0.0+    },+    {+      "number": "51",+      "shape": "roundrect",+      "center_mm": [+        2.75,+        -5.675+      ],+      "size_mm": [+        0.3,+        1.55+      ],+      "rot": 0.0+    },+    {+      "number": "52",+      "shape": "roundrect",+      "center_mm": [+        2.25,+        -5.675+      ],+      "size_mm": [+        0.3,+        1.55+      ],+      "rot": 0.0+    },+    {+      "number": "53",+      "shape": "roundrect",+      "center_mm": [+        1.75,+        -5.675+      ],+      "size_mm": [+        0.3,+        1.55+      ],+      "rot": 0.0+    },+    {+      "number": "54",+      "shape": "roundrect",+      "center_mm": [+        1.25,+        -5.675+      ],+      "size_mm": [+        0.3,+        1.55+      ],+      "rot": 0.0+    },+    {+      "number": "55",+      "shape": "roundrect",+      "center_mm": [+        0.75,+        -5.675+      ],+      "size_mm": [+        0.3,+        1.55+      ],+      "rot": 0.0+    },+    {+      "number": "56",+      "shape": "roundrect",+      "center_mm": [+        0.25,+        -5.675+      ],+      "size_mm": [+        0.3,+        1.55+      ],+      "rot": 0.0+    },+    {+      "number": "57",+      "shape": "roundrect",+      "center_mm": [+        -0.25,+        -5.675+      ],+      "size_mm": [+        0.3,+        1.55+      ],+      "rot": 0.0+    },+    {+      "number": "58",+      "shape": "roundrect",+      "center_mm": [+        -0.75,+        -5.675+      ],+      "size_mm": [+        0.3,+        1.55+      ],+      "rot": 0.0+    },+    {+      "number": "59",+      "shape": "roundrect",+      "center_mm": [+        -1.25,+        -5.675+      ],+      "size_mm": [+        0.3,+        1.55+      ],+      "rot": 0.0+    },+    {+      "number": "60",+      "shape": "roundrect",+      "center_mm": [+        -1.75,+        -5.675+      ],+      "size_mm": [+        0.3,+        1.55+      ],+      "rot": 0.0+    },+    {+      "number": "61",+      "shape": "roundrect",+      "center_mm": [+        -2.25,+        -5.675+      ],+      "size_mm": [+        0.3,+        1.55+      ],+      "rot": 0.0+    },+    {+      "number": "62",+      "shape": "roundrect",+      "center_mm": [+        -2.75,+        -5.675+      ],+      "size_mm": [+        0.3,+        1.55+      ],+      "rot": 0.0+    },+    {+      "number": "63",+      "shape": "roundrect",+      "center_mm": [+        -3.25,+        -5.675+      ],+      "size_mm": [+        0.3,+        1.55+      ],+      "rot": 0.0+    },+    {+      "number": "64",+      "shape": "roundrect",+      "center_mm": [+        -3.75,+        -5.675+      ],+      "size_mm": [+        0.3,+        1.55+      ],+      "rot": 0.0+    }+  ]+}
stm32g474ret6.kicad_mod+6−180
@@ -122,186 +122,6 @@ 		(fill yes) 		(layer "F.SilkS") 	)-	(fp_line-		(start -6.7 -4.15)-		(end -5.25 -4.15)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-	)-	(fp_line-		(start -6.7 4.15)-		(end -6.7 -4.15)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-	)-	(fp_line-		(start -5.25 -5.25)-		(end -4.15 -5.25)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-	)-	(fp_line-		(start -5.25 -4.15)-		(end -5.25 -5.25)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-	)-	(fp_line-		(start -5.25 4.15)-		(end -6.7 4.15)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-	)-	(fp_line-		(start -5.25 5.25)-		(end -5.25 4.15)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-	)-	(fp_line-		(start -4.15 -6.7)-		(end 4.15 -6.7)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-	)-	(fp_line-		(start -4.15 -5.25)-		(end -4.15 -6.7)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-	)-	(fp_line-		(start -4.15 5.25)-		(end -5.25 5.25)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-	)-	(fp_line-		(start -4.15 6.7)-		(end -4.15 5.25)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-	)-	(fp_line-		(start 4.15 -6.7)-		(end 4.15 -5.25)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-	)-	(fp_line-		(start 4.15 -5.25)-		(end 5.25 -5.25)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-	)-	(fp_line-		(start 4.15 5.25)-		(end 4.15 6.7)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-	)-	(fp_line-		(start 4.15 6.7)-		(end -4.15 6.7)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-	)-	(fp_line-		(start 5.25 -5.25)-		(end 5.25 -4.15)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-	)-	(fp_line-		(start 5.25 -4.15)-		(end 6.7 -4.15)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-	)-	(fp_line-		(start 5.25 4.15)-		(end 5.25 5.25)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-	)-	(fp_line-		(start 5.25 5.25)-		(end 4.15 5.25)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-	)-	(fp_line-		(start 6.7 -4.15)-		(end 6.7 4.15)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-	)-	(fp_line-		(start 6.7 4.15)-		(end 5.25 4.15)-		(stroke-			(width 0.05)-			(type solid)-		)-		(layer "F.CrtYd")-	) 	(fp_poly 		(pts 			(xy -4 -5)@@ -723,4 +543,10 @@ 			(xyz 0 0 0) 		) 	)+	(fp_poly+		(pts (xy -6.70 -4.15) (xy -5.25 -4.15) (xy -5.25 -5.25) (xy -4.15 -5.25) (xy -4.15 -6.70) (xy 4.15 -6.70) (xy 4.15 -5.25) (xy 5.25 -5.25) (xy 5.25 -4.15) (xy 6.70 -4.15) (xy 6.70 4.15) (xy 5.25 4.15) (xy 5.25 5.25) (xy 4.15 5.25) (xy 4.15 6.70) (xy -4.15 6.70) (xy -4.15 5.25) (xy -5.25 5.25) (xy -5.25 4.15) (xy -6.70 4.15))+		(stroke (width 0.05) (type solid))+		(fill no)+		(layer "F.CrtYd")+	) )
stm32g474ret6.kicad_sym+65−65
@@ -4,263 +4,263 @@     (property "Value" "STM32G474RET6" (at 0 -45.72 0) (effects (font (size 1.27 1.27))))     (property "Footprint" "" (at 0 0 0) (effects (font (size 1.27 1.27)) hide))     (symbol "STM32G474RET6_0_1"-    (rectangle (start -12.70 40.64) (end 12.70 -43.18)+    (rectangle (start -17.78 40.64) (end 17.78 -43.18)       (stroke (width 0.254) (type default)) (fill (type background)))     )     (symbol "STM32G474RET6_1_1"-    (pin power_in line (at -17.78 38.10 0) (length 5.08)+    (pin power_in line (at -22.86 38.10 0) (length 5.08)       (name "VBAT" (effects (font (size 1.27 1.27))))       (number "1" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at -17.78 35.56 0) (length 5.08)+    (pin bidirectional line (at -22.86 35.56 0) (length 5.08)       (name "PC13" (effects (font (size 1.27 1.27))))       (number "2" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at -17.78 33.02 0) (length 5.08)+    (pin bidirectional line (at -22.86 33.02 0) (length 5.08)       (name "PC14-OSC32_IN" (effects (font (size 1.27 1.27))))       (number "3" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at -17.78 30.48 0) (length 5.08)+    (pin bidirectional line (at -22.86 30.48 0) (length 5.08)       (name "PC15-OSC32_OUT" (effects (font (size 1.27 1.27))))       (number "4" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at -17.78 27.94 0) (length 5.08)+    (pin bidirectional line (at -22.86 27.94 0) (length 5.08)       (name "PF0-OSC_IN" (effects (font (size 1.27 1.27))))       (number "5" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at -17.78 25.40 0) (length 5.08)+    (pin bidirectional line (at -22.86 25.40 0) (length 5.08)       (name "PF1-OSC_OUT" (effects (font (size 1.27 1.27))))       (number "6" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at -17.78 22.86 0) (length 5.08)+    (pin bidirectional line (at -22.86 22.86 0) (length 5.08)       (name "PG10-NRST" (effects (font (size 1.27 1.27))))       (number "7" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at -17.78 20.32 0) (length 5.08)+    (pin bidirectional line (at -22.86 20.32 0) (length 5.08)       (name "PC0" (effects (font (size 1.27 1.27))))       (number "8" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at -17.78 17.78 0) (length 5.08)+    (pin bidirectional line (at -22.86 17.78 0) (length 5.08)       (name "PC1" (effects (font (size 1.27 1.27))))       (number "9" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at -17.78 15.24 0) (length 5.08)+    (pin bidirectional line (at -22.86 15.24 0) (length 5.08)       (name "PC2" (effects (font (size 1.27 1.27))))       (number "10" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at -17.78 12.70 0) (length 5.08)+    (pin bidirectional line (at -22.86 12.70 0) (length 5.08)       (name "PC3" (effects (font (size 1.27 1.27))))       (number "11" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at -17.78 10.16 0) (length 5.08)+    (pin bidirectional line (at -22.86 10.16 0) (length 5.08)       (name "PA0" (effects (font (size 1.27 1.27))))       (number "12" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at -17.78 7.62 0) (length 5.08)+    (pin bidirectional line (at -22.86 7.62 0) (length 5.08)       (name "PA1" (effects (font (size 1.27 1.27))))       (number "13" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at -17.78 5.08 0) (length 5.08)+    (pin bidirectional line (at -22.86 5.08 0) (length 5.08)       (name "PA2" (effects (font (size 1.27 1.27))))       (number "14" (effects (font (size 1.27 1.27))))     )-    (pin power_in line (at -17.78 2.54 0) (length 5.08)+    (pin power_in line (at -22.86 2.54 0) (length 5.08)       (name "VSS" (effects (font (size 1.27 1.27))))       (number "15" (effects (font (size 1.27 1.27))))     )-    (pin power_in line (at -17.78 0.00 0) (length 5.08)+    (pin power_in line (at -22.86 0.00 0) (length 5.08)       (name "VDD" (effects (font (size 1.27 1.27))))       (number "16" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at -17.78 -2.54 0) (length 5.08)+    (pin bidirectional line (at -22.86 -2.54 0) (length 5.08)       (name "PA3" (effects (font (size 1.27 1.27))))       (number "17" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at -17.78 -5.08 0) (length 5.08)+    (pin bidirectional line (at -22.86 -5.08 0) (length 5.08)       (name "PA4" (effects (font (size 1.27 1.27))))       (number "18" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at -17.78 -7.62 0) (length 5.08)+    (pin bidirectional line (at -22.86 -7.62 0) (length 5.08)       (name "PA5" (effects (font (size 1.27 1.27))))       (number "19" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at -17.78 -10.16 0) (length 5.08)+    (pin bidirectional line (at -22.86 -10.16 0) (length 5.08)       (name "PA6" (effects (font (size 1.27 1.27))))       (number "20" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at -17.78 -12.70 0) (length 5.08)+    (pin bidirectional line (at -22.86 -12.70 0) (length 5.08)       (name "PA7" (effects (font (size 1.27 1.27))))       (number "21" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at -17.78 -15.24 0) (length 5.08)+    (pin bidirectional line (at -22.86 -15.24 0) (length 5.08)       (name "PC4" (effects (font (size 1.27 1.27))))       (number "22" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at -17.78 -17.78 0) (length 5.08)+    (pin bidirectional line (at -22.86 -17.78 0) (length 5.08)       (name "PC5" (effects (font (size 1.27 1.27))))       (number "23" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at -17.78 -20.32 0) (length 5.08)+    (pin bidirectional line (at -22.86 -20.32 0) (length 5.08)       (name "PB0" (effects (font (size 1.27 1.27))))       (number "24" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at -17.78 -22.86 0) (length 5.08)+    (pin bidirectional line (at -22.86 -22.86 0) (length 5.08)       (name "PB1" (effects (font (size 1.27 1.27))))       (number "25" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at -17.78 -25.40 0) (length 5.08)+    (pin bidirectional line (at -22.86 -25.40 0) (length 5.08)       (name "PB2" (effects (font (size 1.27 1.27))))       (number "26" (effects (font (size 1.27 1.27))))     )-    (pin power_in line (at -17.78 -27.94 0) (length 5.08)+    (pin power_in line (at -22.86 -27.94 0) (length 5.08)       (name "VSSA" (effects (font (size 1.27 1.27))))       (number "27" (effects (font (size 1.27 1.27))))     )-    (pin power_in line (at -17.78 -30.48 0) (length 5.08)+    (pin power_in line (at -22.86 -30.48 0) (length 5.08)       (name "VREF+" (effects (font (size 1.27 1.27))))       (number "28" (effects (font (size 1.27 1.27))))     )-    (pin power_in line (at -17.78 -33.02 0) (length 5.08)+    (pin power_in line (at -22.86 -33.02 0) (length 5.08)       (name "VDDA" (effects (font (size 1.27 1.27))))       (number "29" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at -17.78 -35.56 0) (length 5.08)+    (pin bidirectional line (at -22.86 -35.56 0) (length 5.08)       (name "PB10" (effects (font (size 1.27 1.27))))       (number "30" (effects (font (size 1.27 1.27))))     )-    (pin power_in line (at -17.78 -38.10 0) (length 5.08)+    (pin power_in line (at -22.86 -38.10 0) (length 5.08)       (name "VSS" (effects (font (size 1.27 1.27))))       (number "31" (effects (font (size 1.27 1.27))))     )-    (pin power_in line (at -17.78 -40.64 0) (length 5.08)+    (pin power_in line (at -22.86 -40.64 0) (length 5.08)       (name "VDD" (effects (font (size 1.27 1.27))))       (number "32" (effects (font (size 1.27 1.27))))     )-    (pin power_in line (at 17.78 38.10 180) (length 5.08)+    (pin power_in line (at 22.86 38.10 180) (length 5.08)       (name "VDD" (effects (font (size 1.27 1.27))))       (number "64" (effects (font (size 1.27 1.27))))     )-    (pin power_in line (at 17.78 35.56 180) (length 5.08)+    (pin power_in line (at 22.86 35.56 180) (length 5.08)       (name "VSS" (effects (font (size 1.27 1.27))))       (number "63" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at 17.78 33.02 180) (length 5.08)+    (pin bidirectional line (at 22.86 33.02 180) (length 5.08)       (name "PB9" (effects (font (size 1.27 1.27))))       (number "62" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at 17.78 30.48 180) (length 5.08)+    (pin bidirectional line (at 22.86 30.48 180) (length 5.08)       (name "PB8-BOOT0" (effects (font (size 1.27 1.27))))       (number "61" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at 17.78 27.94 180) (length 5.08)+    (pin bidirectional line (at 22.86 27.94 180) (length 5.08)       (name "PB7" (effects (font (size 1.27 1.27))))       (number "60" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at 17.78 25.40 180) (length 5.08)+    (pin bidirectional line (at 22.86 25.40 180) (length 5.08)       (name "PB6" (effects (font (size 1.27 1.27))))       (number "59" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at 17.78 22.86 180) (length 5.08)+    (pin bidirectional line (at 22.86 22.86 180) (length 5.08)       (name "PB5" (effects (font (size 1.27 1.27))))       (number "58" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at 17.78 20.32 180) (length 5.08)+    (pin bidirectional line (at 22.86 20.32 180) (length 5.08)       (name "PB4" (effects (font (size 1.27 1.27))))       (number "57" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at 17.78 17.78 180) (length 5.08)+    (pin bidirectional line (at 22.86 17.78 180) (length 5.08)       (name "PB3" (effects (font (size 1.27 1.27))))       (number "56" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at 17.78 15.24 180) (length 5.08)+    (pin bidirectional line (at 22.86 15.24 180) (length 5.08)       (name "PD2" (effects (font (size 1.27 1.27))))       (number "55" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at 17.78 12.70 180) (length 5.08)+    (pin bidirectional line (at 22.86 12.70 180) (length 5.08)       (name "PC12" (effects (font (size 1.27 1.27))))       (number "54" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at 17.78 10.16 180) (length 5.08)+    (pin bidirectional line (at 22.86 10.16 180) (length 5.08)       (name "PC11" (effects (font (size 1.27 1.27))))       (number "53" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at 17.78 7.62 180) (length 5.08)+    (pin bidirectional line (at 22.86 7.62 180) (length 5.08)       (name "PC10" (effects (font (size 1.27 1.27))))       (number "52" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at 17.78 5.08 180) (length 5.08)+    (pin bidirectional line (at 22.86 5.08 180) (length 5.08)       (name "PA15" (effects (font (size 1.27 1.27))))       (number "51" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at 17.78 2.54 180) (length 5.08)+    (pin bidirectional line (at 22.86 2.54 180) (length 5.08)       (name "PA14" (effects (font (size 1.27 1.27))))       (number "50" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at 17.78 0.00 180) (length 5.08)+    (pin bidirectional line (at 22.86 0.00 180) (length 5.08)       (name "PA13" (effects (font (size 1.27 1.27))))       (number "49" (effects (font (size 1.27 1.27))))     )-    (pin power_in line (at 17.78 -2.54 180) (length 5.08)+    (pin power_in line (at 22.86 -2.54 180) (length 5.08)       (name "VDD" (effects (font (size 1.27 1.27))))       (number "48" (effects (font (size 1.27 1.27))))     )-    (pin power_in line (at 17.78 -5.08 180) (length 5.08)+    (pin power_in line (at 22.86 -5.08 180) (length 5.08)       (name "VSS" (effects (font (size 1.27 1.27))))       (number "47" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at 17.78 -7.62 180) (length 5.08)+    (pin bidirectional line (at 22.86 -7.62 180) (length 5.08)       (name "PA12" (effects (font (size 1.27 1.27))))       (number "46" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at 17.78 -10.16 180) (length 5.08)+    (pin bidirectional line (at 22.86 -10.16 180) (length 5.08)       (name "PA11" (effects (font (size 1.27 1.27))))       (number "45" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at 17.78 -12.70 180) (length 5.08)+    (pin bidirectional line (at 22.86 -12.70 180) (length 5.08)       (name "PA10" (effects (font (size 1.27 1.27))))       (number "44" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at 17.78 -15.24 180) (length 5.08)+    (pin bidirectional line (at 22.86 -15.24 180) (length 5.08)       (name "PA9" (effects (font (size 1.27 1.27))))       (number "43" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at 17.78 -17.78 180) (length 5.08)+    (pin bidirectional line (at 22.86 -17.78 180) (length 5.08)       (name "PA8" (effects (font (size 1.27 1.27))))       (number "42" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at 17.78 -20.32 180) (length 5.08)+    (pin bidirectional line (at 22.86 -20.32 180) (length 5.08)       (name "PC9" (effects (font (size 1.27 1.27))))       (number "41" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at 17.78 -22.86 180) (length 5.08)+    (pin bidirectional line (at 22.86 -22.86 180) (length 5.08)       (name "PC8" (effects (font (size 1.27 1.27))))       (number "40" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at 17.78 -25.40 180) (length 5.08)+    (pin bidirectional line (at 22.86 -25.40 180) (length 5.08)       (name "PC7" (effects (font (size 1.27 1.27))))       (number "39" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at 17.78 -27.94 180) (length 5.08)+    (pin bidirectional line (at 22.86 -27.94 180) (length 5.08)       (name "PC6" (effects (font (size 1.27 1.27))))       (number "38" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at 17.78 -30.48 180) (length 5.08)+    (pin bidirectional line (at 22.86 -30.48 180) (length 5.08)       (name "PB15" (effects (font (size 1.27 1.27))))       (number "37" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at 17.78 -33.02 180) (length 5.08)+    (pin bidirectional line (at 22.86 -33.02 180) (length 5.08)       (name "PB14" (effects (font (size 1.27 1.27))))       (number "36" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at 17.78 -35.56 180) (length 5.08)+    (pin bidirectional line (at 22.86 -35.56 180) (length 5.08)       (name "PB13" (effects (font (size 1.27 1.27))))       (number "35" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at 17.78 -38.10 180) (length 5.08)+    (pin bidirectional line (at 22.86 -38.10 180) (length 5.08)       (name "PB12" (effects (font (size 1.27 1.27))))       (number "34" (effects (font (size 1.27 1.27))))     )-    (pin bidirectional line (at 17.78 -40.64 180) (length 5.08)+    (pin bidirectional line (at 22.86 -40.64 180) (length 5.08)       (name "PB11" (effects (font (size 1.27 1.27))))       (number "33" (effects (font (size 1.27 1.27))))     )
stm32g474ret6.lbr+71−79
@@ -50,7 +50,7 @@ <layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/> </layers> <library>-<description>STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-64(10x10). Pinout checked against ST&apos;s open pin data</description>+<description></description> <packages> <package name="LQFP-64_10x10mm_P0.5mm">   <description>LQFP-64, 10 x 10 mm, 0.5 mm pitch</description>@@ -144,82 +144,81 @@ </packages> <symbols> <symbol name="STM32G474RET6">-  <description>STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-64(10x10). Pinout checked against ST&apos;s open pin data</description>-  <wire x1="-12.7" y1="40.64" x2="12.7" y2="40.64" width="0.254" layer="94"/>-  <wire x1="12.7" y1="40.64" x2="12.7" y2="-43.18" width="0.254" layer="94"/>-  <wire x1="12.7" y1="-43.18" x2="-12.7" y2="-43.18" width="0.254" layer="94"/>-  <wire x1="-12.7" y1="-43.18" x2="-12.7" y2="40.64" width="0.254" layer="94"/>+  <wire x1="-17.78" y1="40.64" x2="17.78" y2="40.64" width="0.254" layer="94"/>+  <wire x1="17.78" y1="40.64" x2="17.78" y2="-43.18" width="0.254" layer="94"/>+  <wire x1="17.78" y1="-43.18" x2="-17.78" y2="-43.18" width="0.254" layer="94"/>+  <wire x1="-17.78" y1="-43.18" x2="-17.78" y2="40.64" width="0.254" layer="94"/>   <text x="0.0000" y="43.1800" size="1.27" layer="95" align="center">&gt;NAME</text>   <text x="0.0000" y="-45.7200" size="1.27" layer="96" align="center">&gt;VALUE</text>-  <pin name="VBAT" x="-17.78" y="38.1" length="middle" direction="pwr"/>-  <pin name="PC13" x="-17.78" y="35.56" length="middle" direction="io"/>-  <pin name="PC14-OSC32_IN" x="-17.78" y="33.02" length="middle" direction="io"/>-  <pin name="PC15-OSC32_OUT" x="-17.78" y="30.48" length="middle" direction="io"/>-  <pin name="PF0-OSC_IN" x="-17.78" y="27.94" length="middle" direction="io"/>-  <pin name="PF1-OSC_OUT" x="-17.78" y="25.4" length="middle" direction="io"/>-  <pin name="PG10-NRST" x="-17.78" y="22.86" length="middle" direction="io"/>-  <pin name="PC0" x="-17.78" y="20.32" length="middle" direction="io"/>-  <pin name="PC1" x="-17.78" y="17.78" length="middle" direction="io"/>-  <pin name="PC2" x="-17.78" y="15.24" length="middle" direction="io"/>-  <pin name="PC3" x="-17.78" y="12.7" length="middle" direction="io"/>-  <pin name="PA0" x="-17.78" y="10.16" length="middle" direction="io"/>-  <pin name="PA1" x="-17.78" y="7.62" length="middle" direction="io"/>-  <pin name="PA2" x="-17.78" y="5.08" length="middle" direction="io"/>-  <pin name="VSS" x="-17.78" y="2.54" length="middle" direction="pwr"/>-  <pin name="VDD" x="-17.78" y="0" length="middle" direction="pwr"/>-  <pin name="PA3" x="-17.78" y="-2.54" length="middle" direction="io"/>-  <pin name="PA4" x="-17.78" y="-5.08" length="middle" direction="io"/>-  <pin name="PA5" x="-17.78" y="-7.62" length="middle" direction="io"/>-  <pin name="PA6" x="-17.78" y="-10.16" length="middle" direction="io"/>-  <pin name="PA7" x="-17.78" y="-12.7" length="middle" direction="io"/>-  <pin name="PC4" x="-17.78" y="-15.24" length="middle" direction="io"/>-  <pin name="PC5" x="-17.78" y="-17.78" length="middle" direction="io"/>-  <pin name="PB0" x="-17.78" y="-20.32" length="middle" direction="io"/>-  <pin name="PB1" x="-17.78" y="-22.86" length="middle" direction="io"/>-  <pin name="PB2" x="-17.78" y="-25.4" length="middle" direction="io"/>-  <pin name="VSSA" x="-17.78" y="-27.94" length="middle" direction="pwr"/>-  <pin name="VREF+" x="-17.78" y="-30.48" length="middle" direction="pwr"/>-  <pin name="VDDA" x="-17.78" y="-33.02" length="middle" direction="pwr"/>-  <pin name="PB10" x="-17.78" y="-35.56" length="middle" direction="io"/>-  <pin name="VSS@2" x="-17.78" y="-38.1" length="middle" direction="pwr"/>-  <pin name="VDD@2" x="-17.78" y="-40.64" length="middle" direction="pwr"/>-  <pin name="VDD@3" x="17.78" y="38.1" length="middle" direction="pwr" rot="R180"/>-  <pin name="VSS@3" x="17.78" y="35.56" length="middle" direction="pwr" rot="R180"/>-  <pin name="PB9" x="17.78" y="33.02" length="middle" direction="io" rot="R180"/>-  <pin name="PB8-BOOT0" x="17.78" y="30.48" length="middle" direction="io" rot="R180"/>-  <pin name="PB7" x="17.78" y="27.94" length="middle" direction="io" rot="R180"/>-  <pin name="PB6" x="17.78" y="25.4" length="middle" direction="io" rot="R180"/>-  <pin name="PB5" x="17.78" y="22.86" length="middle" direction="io" rot="R180"/>-  <pin name="PB4" x="17.78" y="20.32" length="middle" direction="io" rot="R180"/>-  <pin name="PB3" x="17.78" y="17.78" length="middle" direction="io" rot="R180"/>-  <pin name="PD2" x="17.78" y="15.24" length="middle" direction="io" rot="R180"/>-  <pin name="PC12" x="17.78" y="12.7" length="middle" direction="io" rot="R180"/>-  <pin name="PC11" x="17.78" y="10.16" length="middle" direction="io" rot="R180"/>-  <pin name="PC10" x="17.78" y="7.62" length="middle" direction="io" rot="R180"/>-  <pin name="PA15" x="17.78" y="5.08" length="middle" direction="io" rot="R180"/>-  <pin name="PA14" x="17.78" y="2.54" length="middle" direction="io" rot="R180"/>-  <pin name="PA13" x="17.78" y="0" length="middle" direction="io" rot="R180"/>-  <pin name="VDD@4" x="17.78" y="-2.54" length="middle" direction="pwr" rot="R180"/>-  <pin name="VSS@4" x="17.78" y="-5.08" length="middle" direction="pwr" rot="R180"/>-  <pin name="PA12" x="17.78" y="-7.62" length="middle" direction="io" rot="R180"/>-  <pin name="PA11" x="17.78" y="-10.16" length="middle" direction="io" rot="R180"/>-  <pin name="PA10" x="17.78" y="-12.7" length="middle" direction="io" rot="R180"/>-  <pin name="PA9" x="17.78" y="-15.24" length="middle" direction="io" rot="R180"/>-  <pin name="PA8" x="17.78" y="-17.78" length="middle" direction="io" rot="R180"/>-  <pin name="PC9" x="17.78" y="-20.32" length="middle" direction="io" rot="R180"/>-  <pin name="PC8" x="17.78" y="-22.86" length="middle" direction="io" rot="R180"/>-  <pin name="PC7" x="17.78" y="-25.4" length="middle" direction="io" rot="R180"/>-  <pin name="PC6" x="17.78" y="-27.94" length="middle" direction="io" rot="R180"/>-  <pin name="PB15" x="17.78" y="-30.48" length="middle" direction="io" rot="R180"/>-  <pin name="PB14" x="17.78" y="-33.02" length="middle" direction="io" rot="R180"/>-  <pin name="PB13" x="17.78" y="-35.56" length="middle" direction="io" rot="R180"/>-  <pin name="PB12" x="17.78" y="-38.1" length="middle" direction="io" rot="R180"/>-  <pin name="PB11" x="17.78" y="-40.64" length="middle" direction="io" rot="R180"/>+  <pin name="VBAT" x="-22.86" y="38.1" length="middle" direction="pwr"/>+  <pin name="PC13" x="-22.86" y="35.56" length="middle" direction="io"/>+  <pin name="PC14-OSC32_IN" x="-22.86" y="33.02" length="middle" direction="io"/>+  <pin name="PC15-OSC32_OUT" x="-22.86" y="30.48" length="middle" direction="io"/>+  <pin name="PF0-OSC_IN" x="-22.86" y="27.94" length="middle" direction="io"/>+  <pin name="PF1-OSC_OUT" x="-22.86" y="25.4" length="middle" direction="io"/>+  <pin name="PG10-NRST" x="-22.86" y="22.86" length="middle" direction="io"/>+  <pin name="PC0" x="-22.86" y="20.32" length="middle" direction="io"/>+  <pin name="PC1" x="-22.86" y="17.78" length="middle" direction="io"/>+  <pin name="PC2" x="-22.86" y="15.24" length="middle" direction="io"/>+  <pin name="PC3" x="-22.86" y="12.7" length="middle" direction="io"/>+  <pin name="PA0" x="-22.86" y="10.16" length="middle" direction="io"/>+  <pin name="PA1" x="-22.86" y="7.62" length="middle" direction="io"/>+  <pin name="PA2" x="-22.86" y="5.08" length="middle" direction="io"/>+  <pin name="VSS" x="-22.86" y="2.54" length="middle" direction="pwr"/>+  <pin name="VDD" x="-22.86" y="0" length="middle" direction="pwr"/>+  <pin name="PA3" x="-22.86" y="-2.54" length="middle" direction="io"/>+  <pin name="PA4" x="-22.86" y="-5.08" length="middle" direction="io"/>+  <pin name="PA5" x="-22.86" y="-7.62" length="middle" direction="io"/>+  <pin name="PA6" x="-22.86" y="-10.16" length="middle" direction="io"/>+  <pin name="PA7" x="-22.86" y="-12.7" length="middle" direction="io"/>+  <pin name="PC4" x="-22.86" y="-15.24" length="middle" direction="io"/>+  <pin name="PC5" x="-22.86" y="-17.78" length="middle" direction="io"/>+  <pin name="PB0" x="-22.86" y="-20.32" length="middle" direction="io"/>+  <pin name="PB1" x="-22.86" y="-22.86" length="middle" direction="io"/>+  <pin name="PB2" x="-22.86" y="-25.4" length="middle" direction="io"/>+  <pin name="VSSA" x="-22.86" y="-27.94" length="middle" direction="pwr"/>+  <pin name="VREF+" x="-22.86" y="-30.48" length="middle" direction="pwr"/>+  <pin name="VDDA" x="-22.86" y="-33.02" length="middle" direction="pwr"/>+  <pin name="PB10" x="-22.86" y="-35.56" length="middle" direction="io"/>+  <pin name="VSS@2" x="-22.86" y="-38.1" length="middle" direction="pwr"/>+  <pin name="VDD@2" x="-22.86" y="-40.64" length="middle" direction="pwr"/>+  <pin name="VDD@3" x="22.86" y="38.1" length="middle" direction="pwr" rot="R180"/>+  <pin name="VSS@3" x="22.86" y="35.56" length="middle" direction="pwr" rot="R180"/>+  <pin name="PB9" x="22.86" y="33.02" length="middle" direction="io" rot="R180"/>+  <pin name="PB8-BOOT0" x="22.86" y="30.48" length="middle" direction="io" rot="R180"/>+  <pin name="PB7" x="22.86" y="27.94" length="middle" direction="io" rot="R180"/>+  <pin name="PB6" x="22.86" y="25.4" length="middle" direction="io" rot="R180"/>+  <pin name="PB5" x="22.86" y="22.86" length="middle" direction="io" rot="R180"/>+  <pin name="PB4" x="22.86" y="20.32" length="middle" direction="io" rot="R180"/>+  <pin name="PB3" x="22.86" y="17.78" length="middle" direction="io" rot="R180"/>+  <pin name="PD2" x="22.86" y="15.24" length="middle" direction="io" rot="R180"/>+  <pin name="PC12" x="22.86" y="12.7" length="middle" direction="io" rot="R180"/>+  <pin name="PC11" x="22.86" y="10.16" length="middle" direction="io" rot="R180"/>+  <pin name="PC10" x="22.86" y="7.62" length="middle" direction="io" rot="R180"/>+  <pin name="PA15" x="22.86" y="5.08" length="middle" direction="io" rot="R180"/>+  <pin name="PA14" x="22.86" y="2.54" length="middle" direction="io" rot="R180"/>+  <pin name="PA13" x="22.86" y="0" length="middle" direction="io" rot="R180"/>+  <pin name="VDD@4" x="22.86" y="-2.54" length="middle" direction="pwr" rot="R180"/>+  <pin name="VSS@4" x="22.86" y="-5.08" length="middle" direction="pwr" rot="R180"/>+  <pin name="PA12" x="22.86" y="-7.62" length="middle" direction="io" rot="R180"/>+  <pin name="PA11" x="22.86" y="-10.16" length="middle" direction="io" rot="R180"/>+  <pin name="PA10" x="22.86" y="-12.7" length="middle" direction="io" rot="R180"/>+  <pin name="PA9" x="22.86" y="-15.24" length="middle" direction="io" rot="R180"/>+  <pin name="PA8" x="22.86" y="-17.78" length="middle" direction="io" rot="R180"/>+  <pin name="PC9" x="22.86" y="-20.32" length="middle" direction="io" rot="R180"/>+  <pin name="PC8" x="22.86" y="-22.86" length="middle" direction="io" rot="R180"/>+  <pin name="PC7" x="22.86" y="-25.4" length="middle" direction="io" rot="R180"/>+  <pin name="PC6" x="22.86" y="-27.94" length="middle" direction="io" rot="R180"/>+  <pin name="PB15" x="22.86" y="-30.48" length="middle" direction="io" rot="R180"/>+  <pin name="PB14" x="22.86" y="-33.02" length="middle" direction="io" rot="R180"/>+  <pin name="PB13" x="22.86" y="-35.56" length="middle" direction="io" rot="R180"/>+  <pin name="PB12" x="22.86" y="-38.1" length="middle" direction="io" rot="R180"/>+  <pin name="PB11" x="22.86" y="-40.64" length="middle" direction="io" rot="R180"/> </symbol> </symbols> <devicesets> <deviceset name="STM32G474RET6" prefix="U">-  <description>STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-64(10x10). Pinout checked against ST&apos;s open pin data</description>+  <description></description>   <gates>     <gate name="G$1" symbol="STM32G474RET6" x="0" y="0"/>   </gates>@@ -291,14 +290,7 @@         <connect gate="G$1" pin="PB12" pad="34"/>         <connect gate="G$1" pin="PB11" pad="33"/>       </connects>-      <technologies>-        <technology name="">-          <attribute name="MPN" value="STM32G474RET6" constant="no"/>-          <attribute name="MANUFACTURER" value="STMicroelectronics" constant="no"/>-          <attribute name="DATASHEET" value="https://www.st.com/resource/en/datasheet/stm32g474ret6.pdf" constant="no"/>-          <attribute name="ADOM_WIKI" value="https://wiki.adom.inc/adom/stm32g474ret6" constant="no"/>-        </technology>-      </technologies>+      <technologies><technology name=""/></technologies>     </device>   </devices> </deviceset>
viewers/footprint.html+1−65
@@ -1,65 +1 @@-<!doctype html><html lang=en><head><meta charset=utf-8>-<meta name=viewport content="width=device-width,initial-scale=1"><title>ADOM/STM32G474RET6 footprint</title>-<style>-:root{--bg:#0d1117;--panel:#161b22;--edge:#30363d;--ink:#e6edf3;--mut:#8b949e;--acc:#00b8b0;--accb:#00e6dc;--hi:#6ea8fe}-*{box-sizing:border-box;margin:0}html,body{height:100%}-body{background:var(--bg);color:var(--ink);font-family:'Satoshi',system-ui,sans-serif;display:flex;flex-direction:column}-.bar{display:flex;flex-wrap:wrap;align-items:center;gap:8px;padding:8px 11px;border-bottom:1px solid var(--edge);flex:none}-.bar .h{font-size:11px;text-transform:uppercase;letter-spacing:.06em;color:var(--mut);font-weight:700}-.bar .sp{flex:1}-.lyrtog{display:inline-flex;align-items:center;gap:6px;font-size:11px;color:var(--mut);background:#1a2130;border:1px solid var(--edge);border-radius:999px;padding:3px 9px;cursor:pointer;user-select:none}-.lyrtog.on{color:var(--ink);border-color:#485162}.lyrtog:not(.on){opacity:.5}-.lyrtog .d{width:8px;height:8px;border-radius:50%;background:#485162}-.stage{flex:1;min-height:0;position:relative;overflow:hidden;background:var(--bg);cursor:grab;touch-action:none}-.stage.drag{cursor:grabbing}-.stage svg{position:absolute;inset:0;width:100%;height:100%}-.pingroup,.pad{cursor:pointer}-.pingroup.hi .pinvis{stroke:var(--hi)!important;stroke-width:7}-rect.pad.hi{stroke:var(--hi);stroke-width:.15;paint-order:stroke}-.lyr-off{display:none}-#tip{position:fixed;z-index:99;pointer-events:none;display:none;max-width:250px;background:#0d1117;border:1px solid var(--acc);border-radius:8px;padding:7px 10px;box-shadow:0 8px 26px #000a}-#tip .tn{font:700 12px ui-monospace,monospace;color:var(--accb)}-#tip .tt{font-size:10px;text-transform:uppercase;letter-spacing:.04em;color:var(--mut);margin-top:1px}-#tip .td{font-size:11px;color:var(--ink);margin-top:5px;line-height:1.4}-</style></head><body>-<div class=bar><span class=h>PCB footprint</span><span class=sp></span><button class="lyrtog on" data-lyr="copper"><span class="d" style="background:#e35d5d"></span>Copper</button><button class="lyrtog on" data-lyr="silk"><span class="d" style="background:#e6edf3"></span>Silkscreen</button><button class="lyrtog" data-lyr="fab"><span class="d" style="background:#8b949e"></span>Fab</button><button class="lyrtog" data-lyr="courtyard"><span class="d" style="background:#bc8cff"></span>Courtyard</button></div>-<div class=stage id=stage><svg xmlns='http://www.w3.org/2000/svg' viewBox='-7.100 -7.100 14.200 14.200' style='width:100%;height:100%'><line class='ly-silk' x1='-5.110' y1='-5.110' x2='-4.160' y2='-5.110' stroke='#d8b4fe' stroke-width='0.120'/><line class='ly-silk' x1='-5.110' y1='-4.160' x2='-5.110' y2='-5.110' stroke='#d8b4fe' stroke-width='0.120'/><line class='ly-silk' x1='-5.110' y1='5.110' x2='-5.110' y2='4.160' stroke='#d8b4fe' stroke-width='0.120'/><line class='ly-silk' x1='-4.160' y1='5.110' x2='-5.110' y2='5.110' stroke='#d8b4fe' stroke-width='0.120'/><line class='ly-silk' x1='4.160' y1='-5.110' x2='5.110' y2='-5.110' stroke='#d8b4fe' stroke-width='0.120'/><line class='ly-silk' x1='5.110' y1='-5.110' x2='5.110' y2='-4.160' stroke='#d8b4fe' stroke-width='0.120'/><line class='ly-silk' x1='5.110' y1='4.160' x2='5.110' y2='5.110' stroke='#d8b4fe' stroke-width='0.120'/><line class='ly-silk' x1='5.110' y1='5.110' x2='4.160' y2='5.110' stroke='#d8b4fe' stroke-width='0.120'/><line class='ly-courtyard' x1='-6.700' y1='-4.150' x2='-5.250' y2='-4.150' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='-6.700' y1='4.150' x2='-6.700' y2='-4.150' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='-5.250' y1='-5.250' x2='-4.150' y2='-5.250' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='-5.250' y1='-4.150' x2='-5.250' y2='-5.250' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='-5.250' y1='4.150' x2='-6.700' y2='4.150' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='-5.250' y1='5.250' x2='-5.250' y2='4.150' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='-4.150' y1='-6.700' x2='4.150' y2='-6.700' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='-4.150' y1='-5.250' x2='-4.150' y2='-6.700' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='-4.150' y1='5.250' x2='-5.250' y2='5.250' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='-4.150' y1='6.700' x2='-4.150' y2='5.250' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='4.150' y1='-6.700' x2='4.150' y2='-5.250' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='4.150' y1='-5.250' x2='5.250' y2='-5.250' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='4.150' y1='5.250' x2='4.150' y2='6.700' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='4.150' y1='6.700' x2='-4.150' y2='6.700' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='5.250' y1='-5.250' x2='5.250' y2='-4.150' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='5.250' y1='-4.150' x2='6.700' y2='-4.150' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='5.250' y1='4.150' x2='5.250' y2='5.250' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='5.250' y1='5.250' x2='4.150' y2='5.250' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='6.700' y1='-4.150' x2='6.700' y2='4.150' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='6.700' y1='4.150' x2='5.250' y2='4.150' stroke='#4ade80' stroke-width='0.050'/><polygon class='ly-silk' points='-5.750,-4.160 -6.090,-4.630 -5.410,-4.630' fill='#d8b4fe' stroke='none'/><polygon class='ly-fab' points='-4.000,-5.000 5.000,-5.000 5.000,5.000 -5.000,5.000 -5.000,-4.000' fill='none' stroke='#f472b6' stroke-width='0.100'/><rect class='ly-copper pad' data-num='1' data-name='VBAT' x='-6.450' y='-3.900' width='1.550' height='0.300' rx='0.075' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-5.675' y='-3.750' font-size='0.350' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>1</text><rect class='ly-copper pad' data-num='2' data-name='PC13' x='-6.450' y='-3.400' width='1.550' height='0.300' rx='0.075' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-5.675' y='-3.250' font-size='0.350' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>2</text><rect class='ly-copper pad' data-num='3' data-name='PC14-OSC32_IN' x='-6.450' y='-2.900' width='1.550' height='0.300' rx='0.075' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-5.675' y='-2.750' font-size='0.350' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>3</text><rect class='ly-copper pad' data-num='4' data-name='PC15-OSC32_OUT' x='-6.450' y='-2.400' width='1.550' height='0.300' rx='0.075' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-5.675' y='-2.250' font-size='0.350' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>4</text><rect class='ly-copper pad' data-num='5' data-name='PF0-OSC_IN' x='-6.450' y='-1.900' width='1.550' height='0.300' rx='0.075' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-5.675' y='-1.750' font-size='0.350' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>5</text><rect class='ly-copper pad' data-num='6' data-name='PF1-OSC_OUT' x='-6.450' y='-1.400' width='1.550' height='0.300' rx='0.075' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-5.675' y='-1.250' font-size='0.350' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>6</text><rect class='ly-copper pad' data-num='7' data-name='PG10-NRST' x='-6.450' y='-0.900' width='1.550' height='0.300' rx='0.075' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-5.675' y='-0.750' font-size='0.350' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>7</text><rect class='ly-copper pad' data-num='8' data-name='PC0' x='-6.450' y='-0.400' width='1.550' height='0.300' rx='0.075' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-5.675' y='-0.250' font-size='0.350' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>8</text><rect class='ly-copper pad' data-num='9' data-name='PC1' x='-6.450' y='0.100' width='1.550' height='0.300' rx='0.075' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-5.675' y='0.250' font-size='0.350' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>9</text><rect class='ly-copper pad' data-num='10' data-name='PC2' x='-6.450' y='0.600' width='1.550' height='0.300' rx='0.075' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-5.675' y='0.750' font-size='0.350' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>10</text><rect class='ly-copper pad' data-num='11' data-name='PC3' x='-6.450' y='1.100' width='1.550' height='0.300' rx='0.075' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-5.675' y='1.250' font-size='0.350' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>11</text><rect class='ly-copper pad' data-num='12' data-name='PA0' x='-6.450' y='1.600' width='1.550' height='0.300' rx='0.075' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-5.675' y='1.750' font-size='0.350' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>12</text><rect class='ly-copper pad' data-num='13' data-name='PA1' x='-6.450' y='2.100' width='1.550' height='0.300' rx='0.075' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-5.675' y='2.250' font-size='0.350' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>13</text><rect class='ly-copper pad' data-num='14' data-name='PA2' x='-6.450' y='2.600' width='1.550' height='0.300' rx='0.075' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-5.675' y='2.750' font-size='0.350' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>14</text><rect class='ly-copper pad' data-num='15' data-name='VSS' x='-6.450' y='3.100' width='1.550' height='0.300' rx='0.075' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-5.675' y='3.250' font-size='0.350' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>15</text><rect class='ly-copper pad' data-num='16' data-name='VDD' x='-6.450' y='3.600' width='1.550' height='0.300' rx='0.075' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-5.675' y='3.750' font-size='0.350' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>16</text><rect class='ly-copper pad' data-num='17' data-name='PA3' x='-3.900' y='4.900' width='0.300' height='1.550' rx='0.075' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-3.750' y='5.675' font-size='0.350' transform='rotate(-90 -3.750 5.675)' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>17</text><rect class='ly-copper pad' data-num='18' data-name='PA4' x='-3.400' y='4.900' width='0.300' height='1.550' rx='0.075' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-3.250' y='5.675' font-size='0.350' transform='rotate(-90 -3.250 5.675)' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>18</text><rect class='ly-copper pad' data-num='19' data-name='PA5' x='-2.900' y='4.900' width='0.300' height='1.550' rx='0.075' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-2.750' y='5.675' font-size='0.350' transform='rotate(-90 -2.750 5.675)' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>19</text><rect class='ly-copper pad' data-num='20' data-name='PA6' x='-2.400' y='4.900' width='0.300' height='1.550' rx='0.075' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-2.250' y='5.675' font-size='0.350' transform='rotate(-90 -2.250 5.675)' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>20</text><rect class='ly-copper pad' data-num='21' data-name='PA7' x='-1.900' y='4.900' width='0.300' height='1.550' rx='0.075' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-1.750' y='5.675' font-size='0.350' transform='rotate(-90 -1.750 5.675)' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>21</text><rect class='ly-copper pad' data-num='22' data-name='PC4' x='-1.400' y='4.900' width='0.300' height='1.550' rx='0.075' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-1.250' y='5.675' font-size='0.350' transform='rotate(-90 -1.250 5.675)' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>22</text><rect class='ly-copper pad' data-num='23' data-name='PC5' x='-0.900' y='4.900' width='0.300' height='1.550' rx='0.075' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-0.750' y='5.675' font-size='0.350' transform='rotate(-90 -0.750 5.675)' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>23</text><rect class='ly-copper pad' data-num='24' data-name='PB0' x='-0.400' y='4.900' width='0.300' height='1.550' rx='0.075' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-0.250' y='5.675' font-size='0.350' transform='rotate(-90 -0.250 5.675)' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>24</text><rect class='ly-copper pad' data-num='25' data-name='PB1' x='0.100' y='4.900' width='0.300' height='1.550' rx='0.075' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='0.250' y='5.675' font-size='0.350' transform='rotate(-90 0.250 5.675)' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>25</text><rect class='ly-copper pad' data-num='26' data-name='PB2' x='0.600' y='4.900' width='0.300' height='1.550' rx='0.075' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='0.750' y='5.675' font-size='0.350' transform='rotate(-90 0.750 5.675)' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>26</text><rect class='ly-copper pad' data-num='27' data-name='VSSA' x='1.100' y='4.900' width='0.300' height='1.550' rx='0.075' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='1.250' y='5.675' font-size='0.350' transform='rotate(-90 1.250 5.675)' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>27</text><rect class='ly-copper pad' data-num='28' data-name='VREF+' x='1.600' y='4.900' width='0.300' height='1.550' rx='0.075' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='1.750' y='5.675' font-size='0.350' transform='rotate(-90 1.750 5.675)' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>28</text><rect class='ly-copper pad' data-num='29' data-name='VDDA' x='2.100' y='4.900' width='0.300' height='1.550' rx='0.075' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='2.250' y='5.675' font-size='0.350' transform='rotate(-90 2.250 5.675)' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>29</text><rect class='ly-copper pad' data-num='30' data-name='PB10' x='2.600' y='4.900' width='0.300' height='1.550' rx='0.075' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='2.750' y='5.675' font-size='0.350' transform='rotate(-90 2.750 5.675)' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>30</text><rect class='ly-copper pad' data-num='31' data-name='VSS' x='3.100' y='4.900' width='0.300' height='1.550' rx='0.075' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='3.250' y='5.675' font-size='0.350' transform='rotate(-90 3.250 5.675)' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>31</text><rect class='ly-copper pad' data-num='32' data-name='VDD' x='3.600' y='4.900' width='0.300' height='1.550' rx='0.075' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='3.750' y='5.675' font-size='0.350' transform='rotate(-90 3.750 5.675)' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>32</text><rect class='ly-copper pad' data-num='33' data-name='PB11' x='4.900' y='3.600' width='1.550' height='0.300' rx='0.075' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='5.675' y='3.750' font-size='0.350' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>33</text><rect class='ly-copper pad' data-num='34' data-name='PB12' x='4.900' y='3.100' width='1.550' height='0.300' rx='0.075' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='5.675' y='3.250' font-size='0.350' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>34</text><rect class='ly-copper pad' data-num='35' data-name='PB13' x='4.900' y='2.600' width='1.550' height='0.300' rx='0.075' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='5.675' y='2.750' font-size='0.350' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>35</text><rect class='ly-copper pad' data-num='36' data-name='PB14' x='4.900' y='2.100' width='1.550' height='0.300' rx='0.075' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='5.675' y='2.250' font-size='0.350' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>36</text><rect class='ly-copper pad' data-num='37' data-name='PB15' x='4.900' y='1.600' width='1.550' height='0.300' rx='0.075' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='5.675' y='1.750' font-size='0.350' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>37</text><rect class='ly-copper pad' data-num='38' data-name='PC6' x='4.900' y='1.100' width='1.550' height='0.300' rx='0.075' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='5.675' y='1.250' font-size='0.350' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>38</text><rect class='ly-copper pad' data-num='39' data-name='PC7' x='4.900' y='0.600' width='1.550' height='0.300' rx='0.075' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='5.675' y='0.750' font-size='0.350' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>39</text><rect class='ly-copper pad' data-num='40' data-name='PC8' x='4.900' y='0.100' width='1.550' height='0.300' rx='0.075' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='5.675' y='0.250' font-size='0.350' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>40</text><rect class='ly-copper pad' data-num='41' data-name='PC9' x='4.900' y='-0.400' width='1.550' height='0.300' rx='0.075' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='5.675' y='-0.250' font-size='0.350' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>41</text><rect class='ly-copper pad' data-num='42' data-name='PA8' x='4.900' y='-0.900' width='1.550' height='0.300' rx='0.075' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='5.675' y='-0.750' font-size='0.350' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>42</text><rect class='ly-copper pad' data-num='43' data-name='PA9' x='4.900' y='-1.400' width='1.550' height='0.300' rx='0.075' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='5.675' y='-1.250' font-size='0.350' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>43</text><rect class='ly-copper pad' data-num='44' data-name='PA10' x='4.900' y='-1.900' width='1.550' height='0.300' rx='0.075' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='5.675' y='-1.750' font-size='0.350' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>44</text><rect class='ly-copper pad' data-num='45' data-name='PA11' x='4.900' y='-2.400' width='1.550' height='0.300' rx='0.075' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='5.675' y='-2.250' font-size='0.350' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>45</text><rect class='ly-copper pad' data-num='46' data-name='PA12' x='4.900' y='-2.900' width='1.550' height='0.300' rx='0.075' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='5.675' y='-2.750' font-size='0.350' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>46</text><rect class='ly-copper pad' data-num='47' data-name='VSS' x='4.900' y='-3.400' width='1.550' height='0.300' rx='0.075' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='5.675' y='-3.250' font-size='0.350' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>47</text><rect class='ly-copper pad' data-num='48' data-name='VDD' x='4.900' y='-3.900' width='1.550' height='0.300' rx='0.075' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='5.675' y='-3.750' font-size='0.350' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>48</text><rect class='ly-copper pad' data-num='49' data-name='PA13' x='3.600' y='-6.450' width='0.300' height='1.550' rx='0.075' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='3.750' y='-5.675' font-size='0.350' transform='rotate(-90 3.750 -5.675)' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>49</text><rect class='ly-copper pad' data-num='50' data-name='PA14' x='3.100' y='-6.450' width='0.300' height='1.550' rx='0.075' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='3.250' y='-5.675' font-size='0.350' transform='rotate(-90 3.250 -5.675)' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>50</text><rect class='ly-copper pad' data-num='51' data-name='PA15' x='2.600' y='-6.450' width='0.300' height='1.550' rx='0.075' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='2.750' y='-5.675' font-size='0.350' transform='rotate(-90 2.750 -5.675)' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>51</text><rect class='ly-copper pad' data-num='52' data-name='PC10' x='2.100' y='-6.450' width='0.300' height='1.550' rx='0.075' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='2.250' y='-5.675' font-size='0.350' transform='rotate(-90 2.250 -5.675)' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>52</text><rect class='ly-copper pad' data-num='53' data-name='PC11' x='1.600' y='-6.450' width='0.300' height='1.550' rx='0.075' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='1.750' y='-5.675' font-size='0.350' transform='rotate(-90 1.750 -5.675)' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>53</text><rect class='ly-copper pad' data-num='54' data-name='PC12' x='1.100' y='-6.450' width='0.300' height='1.550' rx='0.075' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='1.250' y='-5.675' font-size='0.350' transform='rotate(-90 1.250 -5.675)' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>54</text><rect class='ly-copper pad' data-num='55' data-name='PD2' x='0.600' y='-6.450' width='0.300' height='1.550' rx='0.075' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='0.750' y='-5.675' font-size='0.350' transform='rotate(-90 0.750 -5.675)' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>55</text><rect class='ly-copper pad' data-num='56' data-name='PB3' x='0.100' y='-6.450' width='0.300' height='1.550' rx='0.075' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='0.250' y='-5.675' font-size='0.350' transform='rotate(-90 0.250 -5.675)' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>56</text><rect class='ly-copper pad' data-num='57' data-name='PB4' x='-0.400' y='-6.450' width='0.300' height='1.550' rx='0.075' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-0.250' y='-5.675' font-size='0.350' transform='rotate(-90 -0.250 -5.675)' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>57</text><rect class='ly-copper pad' data-num='58' data-name='PB5' x='-0.900' y='-6.450' width='0.300' height='1.550' rx='0.075' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-0.750' y='-5.675' font-size='0.350' transform='rotate(-90 -0.750 -5.675)' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>58</text><rect class='ly-copper pad' data-num='59' data-name='PB6' x='-1.400' y='-6.450' width='0.300' height='1.550' rx='0.075' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-1.250' y='-5.675' font-size='0.350' transform='rotate(-90 -1.250 -5.675)' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>59</text><rect class='ly-copper pad' data-num='60' data-name='PB7' x='-1.900' y='-6.450' width='0.300' height='1.550' rx='0.075' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-1.750' y='-5.675' font-size='0.350' transform='rotate(-90 -1.750 -5.675)' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>60</text><rect class='ly-copper pad' data-num='61' data-name='PB8-BOOT0' x='-2.400' y='-6.450' width='0.300' height='1.550' rx='0.075' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-2.250' y='-5.675' font-size='0.350' transform='rotate(-90 -2.250 -5.675)' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>61</text><rect class='ly-copper pad' data-num='62' data-name='PB9' x='-2.900' y='-6.450' width='0.300' height='1.550' rx='0.075' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-2.750' y='-5.675' font-size='0.350' transform='rotate(-90 -2.750 -5.675)' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>62</text><rect class='ly-copper pad' data-num='63' data-name='VSS' x='-3.400' y='-6.450' width='0.300' height='1.550' rx='0.075' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-3.250' y='-5.675' font-size='0.350' transform='rotate(-90 -3.250 -5.675)' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>63</text><rect class='ly-copper pad' data-num='64' data-name='VDD' x='-3.900' y='-6.450' width='0.300' height='1.550' rx='0.075' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-3.750' y='-5.675' font-size='0.350' transform='rotate(-90 -3.750 -5.675)' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>64</text></svg></div>-<div id=tip></div>-<script>-var KIND="footprint", MPN="ADOM/STM32G474RET6", PINS=[{"desc":"","name":"VBAT","number":"1","type":""},{"desc":"","name":"PC13","number":"2","type":""},{"desc":"","name":"PC14-OSC32_IN","number":"3","type":""},{"desc":"","name":"PC15-OSC32_OUT","number":"4","type":""},{"desc":"","name":"PF0-OSC_IN","number":"5","type":""},{"desc":"","name":"PF1-OSC_OUT","number":"6","type":""},{"desc":"","name":"PG10-NRST","number":"7","type":""},{"desc":"","name":"PC0","number":"8","type":""},{"desc":"","name":"PC1","number":"9","type":""},{"desc":"","name":"PC2","number":"10","type":""},{"desc":"","name":"PC3","number":"11","type":""},{"desc":"","name":"PA0","number":"12","type":""},{"desc":"","name":"PA1","number":"13","type":""},{"desc":"","name":"PA2","number":"14","type":""},{"desc":"","name":"VSS","number":"15","type":""},{"desc":"","name":"VDD","number":"16","type":""},{"desc":"","name":"PA3","number":"17","type":""},{"desc":"","name":"PA4","number":"18","type":""},{"desc":"","name":"PA5","number":"19","type":""},{"desc":"","name":"PA6","number":"20","type":""},{"desc":"","name":"PA7","number":"21","type":""},{"desc":"","name":"PC4","number":"22","type":""},{"desc":"","name":"PC5","number":"23","type":""},{"desc":"","name":"PB0","number":"24","type":""},{"desc":"","name":"PB1","number":"25","type":""},{"desc":"","name":"PB2","number":"26","type":""},{"desc":"","name":"VSSA","number":"27","type":""},{"desc":"","name":"VREF+","number":"28","type":""},{"desc":"","name":"VDDA","number":"29","type":""},{"desc":"","name":"PB10","number":"30","type":""},{"desc":"","name":"VSS","number":"31","type":""},{"desc":"","name":"VDD","number":"32","type":""},{"desc":"","name":"VDD","number":"64","type":""},{"desc":"","name":"VSS","number":"63","type":""},{"desc":"","name":"PB9","number":"62","type":""},{"desc":"","name":"PB8-BOOT0","number":"61","type":""},{"desc":"","name":"PB7","number":"60","type":""},{"desc":"","name":"PB6","number":"59","type":""},{"desc":"","name":"PB5","number":"58","type":""},{"desc":"","name":"PB4","number":"57","type":""},{"desc":"","name":"PB3","number":"56","type":""},{"desc":"","name":"PD2","number":"55","type":""},{"desc":"","name":"PC12","number":"54","type":""},{"desc":"","name":"PC11","number":"53","type":""},{"desc":"","name":"PC10","number":"52","type":""},{"desc":"","name":"PA15","number":"51","type":""},{"desc":"","name":"PA14","number":"50","type":""},{"desc":"","name":"PA13","number":"49","type":""},{"desc":"","name":"VDD","number":"48","type":""},{"desc":"","name":"VSS","number":"47","type":""},{"desc":"","name":"PA12","number":"46","type":""},{"desc":"","name":"PA11","number":"45","type":""},{"desc":"","name":"PA10","number":"44","type":""},{"desc":"","name":"PA9","number":"43","type":""},{"desc":"","name":"PA8","number":"42","type":""},{"desc":"","name":"PC9","number":"41","type":""},{"desc":"","name":"PC8","number":"40","type":""},{"desc":"","name":"PC7","number":"39","type":""},{"desc":"","name":"PC6","number":"38","type":""},{"desc":"","name":"PB15","number":"37","type":""},{"desc":"","name":"PB14","number":"36","type":""},{"desc":"","name":"PB13","number":"35","type":""},{"desc":"","name":"PB12","number":"34","type":""},{"desc":"","name":"PB11","number":"33","type":""}];-var byNum={}; PINS.forEach(function(p){byNum[String(p.number)]=p;});-var stage=document.getElementById('stage'), svg=stage.querySelector('svg'), tip=document.getElementById('tip');-// ---- pan/zoom -----var vb=(svg.getAttribute('viewBox')||'0 0 100 100').split(/\s+/).map(Number), base=vb.slice();-function setVB(){svg.setAttribute('viewBox',vb.join(' '));}-stage.addEventListener('wheel',function(e){e.preventDefault();var r=stage.getBoundingClientRect();var mx=(e.clientX-r.left)/r.width,my=(e.clientY-r.top)/r.height;var f=e.deltaY<0?0.88:1.14;var nw=vb[2]*f,nh=vb[3]*f;vb[0]+=(vb[2]-nw)*mx;vb[1]+=(vb[3]-nh)*my;vb[2]=nw;vb[3]=nh;setVB();},{passive:false});-var pan=null;-stage.addEventListener('pointerdown',function(e){pan={x:e.clientX,y:e.clientY};stage.classList.add('drag');stage.setPointerCapture(e.pointerId);});-stage.addEventListener('pointermove',function(e){if(!pan)return;var r=stage.getBoundingClientRect();vb[0]-=(e.clientX-pan.x)/r.width*vb[2];vb[1]-=(e.clientY-pan.y)/r.height*vb[3];pan={x:e.clientX,y:e.clientY};setVB();});-function endPan(){pan=null;stage.classList.remove('drag');}-stage.addEventListener('pointerup',endPan);stage.addEventListener('pointerleave',endPan);-stage.addEventListener('dblclick',function(){vb=base.slice();setVB();});-// ---- cross-highlight bus -----function els(n){return [].slice.call(document.querySelectorAll('[data-num="'+n+'"]'));}-function clearHi(){[].slice.call(document.querySelectorAll('.hi')).forEach(function(e){e.classList.remove('hi');});}-function hi(n){els(n).forEach(function(e){e.classList.add('hi');});}-function post(n){try{parent.postMessage({type:'lbr-hover',pin:n===null?null:String(n),mpn:MPN},'*');}catch(_){}}-function showTip(n,x,y){var p=byNum[String(n)];if(!p)return;tip.innerHTML='<span class=tn></span><div class=tt></div><div class=td></div>';tip.querySelector('.tn').textContent=n+'  '+(p.name||'');tip.querySelector('.tt').textContent=p.type||'';var d=p.desc||'';if(d)tip.querySelector('.td').textContent=d;else tip.querySelector('.td').style.display='none';tip.style.display='block';tip.style.left=(x+14)+'px';tip.style.top=(y+12)+'px';}-[].slice.call(document.querySelectorAll('.pingroup,.pad')).forEach(function(g){-  var n=g.getAttribute('data-num');-  g.addEventListener('mouseenter',function(e){clearHi();hi(n);post(n);showTip(n,e.clientX,e.clientY);});-  g.addEventListener('mousemove',function(e){tip.style.left=(e.clientX+14)+'px';tip.style.top=(e.clientY+12)+'px';});-  g.addEventListener('mouseleave',function(){clearHi();post(null);tip.style.display='none';});-});-window.addEventListener('message',function(e){var d=e.data||{};if(d.type!=='lbr-hover')return;clearHi();if(d.pin!=null)hi(d.pin);});-// ---- footprint layer toggles -----[].slice.call(document.querySelectorAll('.lyrtog')).forEach(function(b){-  function apply(on){[].slice.call(document.querySelectorAll('.ly-'+b.getAttribute('data-lyr'))).forEach(function(el){el.classList.toggle('lyr-off',!on);});}-  apply(b.classList.contains('on'));-  b.addEventListener('click',function(){apply(b.classList.toggle('on'));});-});-// ---- auto-grow the host readme iframe -----function ph(){var h=Math.max(360,Math.min(16000,document.body.scrollHeight||420));parent.postMessage({type:'readme-height',height:h},'*');}-window.addEventListener('load',ph);setTimeout(ph,300);-</script>-</body></html>+<!doctype html><title>stm32g474ret6</title>\ No newline at end of file
viewers/symbol.html+1−65
@@ -1,65 +1 @@-<!doctype html><html lang=en><head><meta charset=utf-8>-<meta name=viewport content="width=device-width,initial-scale=1"><title>ADOM/STM32G474RET6 symbol</title>-<style>-:root{--bg:#0d1117;--panel:#161b22;--edge:#30363d;--ink:#e6edf3;--mut:#8b949e;--acc:#00b8b0;--accb:#00e6dc;--hi:#6ea8fe}-*{box-sizing:border-box;margin:0}html,body{height:100%}-body{background:var(--bg);color:var(--ink);font-family:'Satoshi',system-ui,sans-serif;display:flex;flex-direction:column}-.bar{display:flex;flex-wrap:wrap;align-items:center;gap:8px;padding:8px 11px;border-bottom:1px solid var(--edge);flex:none}-.bar .h{font-size:11px;text-transform:uppercase;letter-spacing:.06em;color:var(--mut);font-weight:700}-.bar .sp{flex:1}-.lyrtog{display:inline-flex;align-items:center;gap:6px;font-size:11px;color:var(--mut);background:#1a2130;border:1px solid var(--edge);border-radius:999px;padding:3px 9px;cursor:pointer;user-select:none}-.lyrtog.on{color:var(--ink);border-color:#485162}.lyrtog:not(.on){opacity:.5}-.lyrtog .d{width:8px;height:8px;border-radius:50%;background:#485162}-.stage{flex:1;min-height:0;position:relative;overflow:hidden;background:var(--bg);cursor:grab;touch-action:none}-.stage.drag{cursor:grabbing}-.stage svg{position:absolute;inset:0;width:100%;height:100%}-.pingroup,.pad{cursor:pointer}-.pingroup.hi .pinvis{stroke:var(--hi)!important;stroke-width:7}-rect.pad.hi{stroke:var(--hi);stroke-width:.15;paint-order:stroke}-.lyr-off{display:none}-#tip{position:fixed;z-index:99;pointer-events:none;display:none;max-width:250px;background:#0d1117;border:1px solid var(--acc);border-radius:8px;padding:7px 10px;box-shadow:0 8px 26px #000a}-#tip .tn{font:700 12px ui-monospace,monospace;color:var(--accb)}-#tip .tt{font-size:10px;text-transform:uppercase;letter-spacing:.04em;color:var(--mut);margin-top:1px}-#tip .td{font-size:11px;color:var(--ink);margin-top:5px;line-height:1.4}-</style></head><body>-<div class=bar><span class=h>Schematic symbol</span><span class=sp></span></div>-<div class=stage id=stage><svg xmlns='http://www.w3.org/2000/svg' viewBox='-750 -1700 1500 3400' style='width:100%;height:100%'><rect x='-500.0' y='-1650.0' width='1000.0' height='3300.0' fill='#e35d5d22' stroke='#e35d5d' stroke-width='4'/><g class='pingroup' data-num='1' data-name='VBAT'><line class='pinvis' x1='-700.0' y1='-1550.0' x2='-500.0' y2='-1550.0' stroke='#dfe4ec' stroke-width='4'/><line x1='-700.0' y1='-1550.0' x2='-500.0' y2='-1550.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-600.0' y='-1505.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>1</text><text x='-470.0' y='-1550.0' font-size='60' fill='#e6e9ef' text-anchor='start' dominant-baseline='central'>VBAT</text><g class='pingroup' data-num='2' data-name='PC13'><line class='pinvis' x1='-700.0' y1='-1450.0' x2='-500.0' y2='-1450.0' stroke='#dfe4ec' stroke-width='4'/><line x1='-700.0' y1='-1450.0' x2='-500.0' y2='-1450.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-600.0' y='-1405.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>2</text><text x='-470.0' y='-1450.0' font-size='60' fill='#e6e9ef' text-anchor='start' dominant-baseline='central'>PC13</text><g class='pingroup' data-num='3' data-name='PC14-OSC32_IN'><line class='pinvis' x1='-700.0' y1='-1350.0' x2='-500.0' y2='-1350.0' stroke='#dfe4ec' stroke-width='4'/><line x1='-700.0' y1='-1350.0' x2='-500.0' y2='-1350.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-600.0' y='-1305.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>3</text><text x='-470.0' y='-1350.0' font-size='60' fill='#e6e9ef' text-anchor='start' dominant-baseline='central'>PC14-OSC32_IN</text><g class='pingroup' data-num='4' data-name='PC15-OSC32_OUT'><line class='pinvis' x1='-700.0' y1='-1250.0' x2='-500.0' y2='-1250.0' stroke='#dfe4ec' stroke-width='4'/><line x1='-700.0' y1='-1250.0' x2='-500.0' y2='-1250.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-600.0' y='-1205.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>4</text><text x='-470.0' y='-1250.0' font-size='60' fill='#e6e9ef' text-anchor='start' dominant-baseline='central'>PC15-OSC32_OUT</text><g class='pingroup' data-num='5' data-name='PF0-OSC_IN'><line class='pinvis' x1='-700.0' y1='-1150.0' x2='-500.0' y2='-1150.0' stroke='#dfe4ec' stroke-width='4'/><line x1='-700.0' y1='-1150.0' x2='-500.0' y2='-1150.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-600.0' y='-1105.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>5</text><text x='-470.0' y='-1150.0' font-size='60' fill='#e6e9ef' text-anchor='start' dominant-baseline='central'>PF0-OSC_IN</text><g class='pingroup' data-num='6' data-name='PF1-OSC_OUT'><line class='pinvis' x1='-700.0' y1='-1050.0' x2='-500.0' y2='-1050.0' stroke='#dfe4ec' stroke-width='4'/><line x1='-700.0' y1='-1050.0' x2='-500.0' y2='-1050.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-600.0' y='-1005.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>6</text><text x='-470.0' y='-1050.0' font-size='60' fill='#e6e9ef' text-anchor='start' dominant-baseline='central'>PF1-OSC_OUT</text><g class='pingroup' data-num='7' data-name='PG10-NRST'><line class='pinvis' x1='-700.0' y1='-950.0' x2='-500.0' y2='-950.0' stroke='#dfe4ec' stroke-width='4'/><line x1='-700.0' y1='-950.0' x2='-500.0' y2='-950.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-600.0' y='-905.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>7</text><text x='-470.0' y='-950.0' font-size='60' fill='#e6e9ef' text-anchor='start' dominant-baseline='central'>PG10-NRST</text><g class='pingroup' data-num='8' data-name='PC0'><line class='pinvis' x1='-700.0' y1='-850.0' x2='-500.0' y2='-850.0' stroke='#dfe4ec' stroke-width='4'/><line x1='-700.0' y1='-850.0' x2='-500.0' y2='-850.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-600.0' y='-805.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>8</text><text x='-470.0' y='-850.0' font-size='60' fill='#e6e9ef' text-anchor='start' dominant-baseline='central'>PC0</text><g class='pingroup' data-num='9' data-name='PC1'><line class='pinvis' x1='-700.0' y1='-750.0' x2='-500.0' y2='-750.0' stroke='#dfe4ec' stroke-width='4'/><line x1='-700.0' y1='-750.0' x2='-500.0' y2='-750.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-600.0' y='-705.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>9</text><text x='-470.0' y='-750.0' font-size='60' fill='#e6e9ef' text-anchor='start' dominant-baseline='central'>PC1</text><g class='pingroup' data-num='10' data-name='PC2'><line class='pinvis' x1='-700.0' y1='-650.0' x2='-500.0' y2='-650.0' stroke='#dfe4ec' stroke-width='4'/><line x1='-700.0' y1='-650.0' x2='-500.0' y2='-650.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-600.0' y='-605.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>10</text><text x='-470.0' y='-650.0' font-size='60' fill='#e6e9ef' text-anchor='start' dominant-baseline='central'>PC2</text><g class='pingroup' data-num='11' data-name='PC3'><line class='pinvis' x1='-700.0' y1='-550.0' x2='-500.0' y2='-550.0' stroke='#dfe4ec' stroke-width='4'/><line x1='-700.0' y1='-550.0' x2='-500.0' y2='-550.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-600.0' y='-505.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>11</text><text x='-470.0' y='-550.0' font-size='60' fill='#e6e9ef' text-anchor='start' dominant-baseline='central'>PC3</text><g class='pingroup' data-num='12' data-name='PA0'><line class='pinvis' x1='-700.0' y1='-450.0' x2='-500.0' y2='-450.0' stroke='#dfe4ec' stroke-width='4'/><line x1='-700.0' y1='-450.0' x2='-500.0' y2='-450.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-600.0' y='-405.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>12</text><text x='-470.0' y='-450.0' font-size='60' fill='#e6e9ef' text-anchor='start' dominant-baseline='central'>PA0</text><g class='pingroup' data-num='13' data-name='PA1'><line class='pinvis' x1='-700.0' y1='-350.0' x2='-500.0' y2='-350.0' stroke='#dfe4ec' stroke-width='4'/><line x1='-700.0' y1='-350.0' x2='-500.0' y2='-350.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-600.0' y='-305.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>13</text><text x='-470.0' y='-350.0' font-size='60' fill='#e6e9ef' text-anchor='start' dominant-baseline='central'>PA1</text><g class='pingroup' data-num='14' data-name='PA2'><line class='pinvis' x1='-700.0' y1='-250.0' x2='-500.0' y2='-250.0' stroke='#dfe4ec' stroke-width='4'/><line x1='-700.0' y1='-250.0' x2='-500.0' y2='-250.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-600.0' y='-205.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>14</text><text x='-470.0' y='-250.0' font-size='60' fill='#e6e9ef' text-anchor='start' dominant-baseline='central'>PA2</text><g class='pingroup' data-num='15' data-name='VSS'><line class='pinvis' x1='-700.0' y1='-150.0' x2='-500.0' y2='-150.0' stroke='#dfe4ec' stroke-width='4'/><line x1='-700.0' y1='-150.0' x2='-500.0' y2='-150.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-600.0' y='-105.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>15</text><text x='-470.0' y='-150.0' font-size='60' fill='#e6e9ef' text-anchor='start' dominant-baseline='central'>VSS</text><g class='pingroup' data-num='16' data-name='VDD'><line class='pinvis' x1='-700.0' y1='-50.0' x2='-500.0' y2='-50.0' stroke='#dfe4ec' stroke-width='4'/><line x1='-700.0' y1='-50.0' x2='-500.0' y2='-50.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-600.0' y='-5.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>16</text><text x='-470.0' y='-50.0' font-size='60' fill='#e6e9ef' text-anchor='start' dominant-baseline='central'>VDD</text><g class='pingroup' data-num='17' data-name='PA3'><line class='pinvis' x1='-700.0' y1='50.0' x2='-500.0' y2='50.0' stroke='#dfe4ec' stroke-width='4'/><line x1='-700.0' y1='50.0' x2='-500.0' y2='50.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-600.0' y='95.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>17</text><text x='-470.0' y='50.0' font-size='60' fill='#e6e9ef' text-anchor='start' dominant-baseline='central'>PA3</text><g class='pingroup' data-num='18' data-name='PA4'><line class='pinvis' x1='-700.0' y1='150.0' x2='-500.0' y2='150.0' stroke='#dfe4ec' stroke-width='4'/><line x1='-700.0' y1='150.0' x2='-500.0' y2='150.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-600.0' y='195.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>18</text><text x='-470.0' y='150.0' font-size='60' fill='#e6e9ef' text-anchor='start' dominant-baseline='central'>PA4</text><g class='pingroup' data-num='19' data-name='PA5'><line class='pinvis' x1='-700.0' y1='250.0' x2='-500.0' y2='250.0' stroke='#dfe4ec' stroke-width='4'/><line x1='-700.0' y1='250.0' x2='-500.0' y2='250.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-600.0' y='295.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>19</text><text x='-470.0' y='250.0' font-size='60' fill='#e6e9ef' text-anchor='start' dominant-baseline='central'>PA5</text><g class='pingroup' data-num='20' data-name='PA6'><line class='pinvis' x1='-700.0' y1='350.0' x2='-500.0' y2='350.0' stroke='#dfe4ec' stroke-width='4'/><line x1='-700.0' y1='350.0' x2='-500.0' y2='350.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-600.0' y='395.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>20</text><text x='-470.0' y='350.0' font-size='60' fill='#e6e9ef' text-anchor='start' dominant-baseline='central'>PA6</text><g class='pingroup' data-num='21' data-name='PA7'><line class='pinvis' x1='-700.0' y1='450.0' x2='-500.0' y2='450.0' stroke='#dfe4ec' stroke-width='4'/><line x1='-700.0' y1='450.0' x2='-500.0' y2='450.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-600.0' y='495.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>21</text><text x='-470.0' y='450.0' font-size='60' fill='#e6e9ef' text-anchor='start' dominant-baseline='central'>PA7</text><g class='pingroup' data-num='22' data-name='PC4'><line class='pinvis' x1='-700.0' y1='550.0' x2='-500.0' y2='550.0' stroke='#dfe4ec' stroke-width='4'/><line x1='-700.0' y1='550.0' x2='-500.0' y2='550.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-600.0' y='595.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>22</text><text x='-470.0' y='550.0' font-size='60' fill='#e6e9ef' text-anchor='start' dominant-baseline='central'>PC4</text><g class='pingroup' data-num='23' data-name='PC5'><line class='pinvis' x1='-700.0' y1='650.0' x2='-500.0' y2='650.0' stroke='#dfe4ec' stroke-width='4'/><line x1='-700.0' y1='650.0' x2='-500.0' y2='650.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-600.0' y='695.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>23</text><text x='-470.0' y='650.0' font-size='60' fill='#e6e9ef' text-anchor='start' dominant-baseline='central'>PC5</text><g class='pingroup' data-num='24' data-name='PB0'><line class='pinvis' x1='-700.0' y1='750.0' x2='-500.0' y2='750.0' stroke='#dfe4ec' stroke-width='4'/><line x1='-700.0' y1='750.0' x2='-500.0' y2='750.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-600.0' y='795.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>24</text><text x='-470.0' y='750.0' font-size='60' fill='#e6e9ef' text-anchor='start' dominant-baseline='central'>PB0</text><g class='pingroup' data-num='25' data-name='PB1'><line class='pinvis' x1='-700.0' y1='850.0' x2='-500.0' y2='850.0' stroke='#dfe4ec' stroke-width='4'/><line x1='-700.0' y1='850.0' x2='-500.0' y2='850.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-600.0' y='895.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>25</text><text x='-470.0' y='850.0' font-size='60' fill='#e6e9ef' text-anchor='start' dominant-baseline='central'>PB1</text><g class='pingroup' data-num='26' data-name='PB2'><line class='pinvis' x1='-700.0' y1='950.0' x2='-500.0' y2='950.0' stroke='#dfe4ec' stroke-width='4'/><line x1='-700.0' y1='950.0' x2='-500.0' y2='950.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-600.0' y='995.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>26</text><text x='-470.0' y='950.0' font-size='60' fill='#e6e9ef' text-anchor='start' dominant-baseline='central'>PB2</text><g class='pingroup' data-num='27' data-name='VSSA'><line class='pinvis' x1='-700.0' y1='1050.0' x2='-500.0' y2='1050.0' stroke='#dfe4ec' stroke-width='4'/><line x1='-700.0' y1='1050.0' x2='-500.0' y2='1050.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-600.0' y='1095.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>27</text><text x='-470.0' y='1050.0' font-size='60' fill='#e6e9ef' text-anchor='start' dominant-baseline='central'>VSSA</text><g class='pingroup' data-num='28' data-name='VREF+'><line class='pinvis' x1='-700.0' y1='1150.0' x2='-500.0' y2='1150.0' stroke='#dfe4ec' stroke-width='4'/><line x1='-700.0' y1='1150.0' x2='-500.0' y2='1150.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-600.0' y='1195.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>28</text><text x='-470.0' y='1150.0' font-size='60' fill='#e6e9ef' text-anchor='start' dominant-baseline='central'>VREF+</text><g class='pingroup' data-num='29' data-name='VDDA'><line class='pinvis' x1='-700.0' y1='1250.0' x2='-500.0' y2='1250.0' stroke='#dfe4ec' stroke-width='4'/><line x1='-700.0' y1='1250.0' x2='-500.0' y2='1250.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-600.0' y='1295.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>29</text><text x='-470.0' y='1250.0' font-size='60' fill='#e6e9ef' text-anchor='start' dominant-baseline='central'>VDDA</text><g class='pingroup' data-num='30' data-name='PB10'><line class='pinvis' x1='-700.0' y1='1350.0' x2='-500.0' y2='1350.0' stroke='#dfe4ec' stroke-width='4'/><line x1='-700.0' y1='1350.0' x2='-500.0' y2='1350.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-600.0' y='1395.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>30</text><text x='-470.0' y='1350.0' font-size='60' fill='#e6e9ef' text-anchor='start' dominant-baseline='central'>PB10</text><g class='pingroup' data-num='31' data-name='VSS'><line class='pinvis' x1='-700.0' y1='1450.0' x2='-500.0' y2='1450.0' stroke='#dfe4ec' stroke-width='4'/><line x1='-700.0' y1='1450.0' x2='-500.0' y2='1450.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-600.0' y='1495.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>31</text><text x='-470.0' y='1450.0' font-size='60' fill='#e6e9ef' text-anchor='start' dominant-baseline='central'>VSS</text><g class='pingroup' data-num='32' data-name='VDD'><line class='pinvis' x1='-700.0' y1='1550.0' x2='-500.0' y2='1550.0' stroke='#dfe4ec' stroke-width='4'/><line x1='-700.0' y1='1550.0' x2='-500.0' y2='1550.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-600.0' y='1595.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>32</text><text x='-470.0' y='1550.0' font-size='60' fill='#e6e9ef' text-anchor='start' dominant-baseline='central'>VDD</text><g class='pingroup' data-num='64' data-name='VDD'><line class='pinvis' x1='700.0' y1='-1550.0' x2='500.0' y2='-1550.0' stroke='#dfe4ec' stroke-width='4'/><line x1='700.0' y1='-1550.0' x2='500.0' y2='-1550.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='600.0' y='-1595.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>64</text><text x='470.0' y='-1550.0' font-size='60' fill='#e6e9ef' text-anchor='end' dominant-baseline='central'>VDD</text><g class='pingroup' data-num='63' data-name='VSS'><line class='pinvis' x1='700.0' y1='-1450.0' x2='500.0' y2='-1450.0' stroke='#dfe4ec' stroke-width='4'/><line x1='700.0' y1='-1450.0' x2='500.0' y2='-1450.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='600.0' y='-1495.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>63</text><text x='470.0' y='-1450.0' font-size='60' fill='#e6e9ef' text-anchor='end' dominant-baseline='central'>VSS</text><g class='pingroup' data-num='62' data-name='PB9'><line class='pinvis' x1='700.0' y1='-1350.0' x2='500.0' y2='-1350.0' stroke='#dfe4ec' stroke-width='4'/><line x1='700.0' y1='-1350.0' x2='500.0' y2='-1350.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='600.0' y='-1395.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>62</text><text x='470.0' y='-1350.0' font-size='60' fill='#e6e9ef' text-anchor='end' dominant-baseline='central'>PB9</text><g class='pingroup' data-num='61' data-name='PB8-BOOT0'><line class='pinvis' x1='700.0' y1='-1250.0' x2='500.0' y2='-1250.0' stroke='#dfe4ec' stroke-width='4'/><line x1='700.0' y1='-1250.0' x2='500.0' y2='-1250.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='600.0' y='-1295.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>61</text><text x='470.0' y='-1250.0' font-size='60' fill='#e6e9ef' text-anchor='end' dominant-baseline='central'>PB8-BOOT0</text><g class='pingroup' data-num='60' data-name='PB7'><line class='pinvis' x1='700.0' y1='-1150.0' x2='500.0' y2='-1150.0' stroke='#dfe4ec' stroke-width='4'/><line x1='700.0' y1='-1150.0' x2='500.0' y2='-1150.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='600.0' y='-1195.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>60</text><text x='470.0' y='-1150.0' font-size='60' fill='#e6e9ef' text-anchor='end' dominant-baseline='central'>PB7</text><g class='pingroup' data-num='59' data-name='PB6'><line class='pinvis' x1='700.0' y1='-1050.0' x2='500.0' y2='-1050.0' stroke='#dfe4ec' stroke-width='4'/><line x1='700.0' y1='-1050.0' x2='500.0' y2='-1050.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='600.0' y='-1095.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>59</text><text x='470.0' y='-1050.0' font-size='60' fill='#e6e9ef' text-anchor='end' dominant-baseline='central'>PB6</text><g class='pingroup' data-num='58' data-name='PB5'><line class='pinvis' x1='700.0' y1='-950.0' x2='500.0' y2='-950.0' stroke='#dfe4ec' stroke-width='4'/><line x1='700.0' y1='-950.0' x2='500.0' y2='-950.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='600.0' y='-995.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>58</text><text x='470.0' y='-950.0' font-size='60' fill='#e6e9ef' text-anchor='end' dominant-baseline='central'>PB5</text><g class='pingroup' data-num='57' data-name='PB4'><line class='pinvis' x1='700.0' y1='-850.0' x2='500.0' y2='-850.0' stroke='#dfe4ec' stroke-width='4'/><line x1='700.0' y1='-850.0' x2='500.0' y2='-850.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='600.0' y='-895.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>57</text><text x='470.0' y='-850.0' font-size='60' fill='#e6e9ef' text-anchor='end' dominant-baseline='central'>PB4</text><g class='pingroup' data-num='56' data-name='PB3'><line class='pinvis' x1='700.0' y1='-750.0' x2='500.0' y2='-750.0' stroke='#dfe4ec' stroke-width='4'/><line x1='700.0' y1='-750.0' x2='500.0' y2='-750.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='600.0' y='-795.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>56</text><text x='470.0' y='-750.0' font-size='60' fill='#e6e9ef' text-anchor='end' dominant-baseline='central'>PB3</text><g class='pingroup' data-num='55' data-name='PD2'><line class='pinvis' x1='700.0' y1='-650.0' x2='500.0' y2='-650.0' stroke='#dfe4ec' stroke-width='4'/><line x1='700.0' y1='-650.0' x2='500.0' y2='-650.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='600.0' y='-695.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>55</text><text x='470.0' y='-650.0' font-size='60' fill='#e6e9ef' text-anchor='end' dominant-baseline='central'>PD2</text><g class='pingroup' data-num='54' data-name='PC12'><line class='pinvis' x1='700.0' y1='-550.0' x2='500.0' y2='-550.0' stroke='#dfe4ec' stroke-width='4'/><line x1='700.0' y1='-550.0' x2='500.0' y2='-550.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='600.0' y='-595.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>54</text><text x='470.0' y='-550.0' font-size='60' fill='#e6e9ef' text-anchor='end' dominant-baseline='central'>PC12</text><g class='pingroup' data-num='53' data-name='PC11'><line class='pinvis' x1='700.0' y1='-450.0' x2='500.0' y2='-450.0' stroke='#dfe4ec' stroke-width='4'/><line x1='700.0' y1='-450.0' x2='500.0' y2='-450.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='600.0' y='-495.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>53</text><text x='470.0' y='-450.0' font-size='60' fill='#e6e9ef' text-anchor='end' dominant-baseline='central'>PC11</text><g class='pingroup' data-num='52' data-name='PC10'><line class='pinvis' x1='700.0' y1='-350.0' x2='500.0' y2='-350.0' stroke='#dfe4ec' stroke-width='4'/><line x1='700.0' y1='-350.0' x2='500.0' y2='-350.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='600.0' y='-395.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>52</text><text x='470.0' y='-350.0' font-size='60' fill='#e6e9ef' text-anchor='end' dominant-baseline='central'>PC10</text><g class='pingroup' data-num='51' data-name='PA15'><line class='pinvis' x1='700.0' y1='-250.0' x2='500.0' y2='-250.0' stroke='#dfe4ec' stroke-width='4'/><line x1='700.0' y1='-250.0' x2='500.0' y2='-250.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='600.0' y='-295.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>51</text><text x='470.0' y='-250.0' font-size='60' fill='#e6e9ef' text-anchor='end' dominant-baseline='central'>PA15</text><g class='pingroup' data-num='50' data-name='PA14'><line class='pinvis' x1='700.0' y1='-150.0' x2='500.0' y2='-150.0' stroke='#dfe4ec' stroke-width='4'/><line x1='700.0' y1='-150.0' x2='500.0' y2='-150.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='600.0' y='-195.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>50</text><text x='470.0' y='-150.0' font-size='60' fill='#e6e9ef' text-anchor='end' dominant-baseline='central'>PA14</text><g class='pingroup' data-num='49' data-name='PA13'><line class='pinvis' x1='700.0' y1='-50.0' x2='500.0' y2='-50.0' stroke='#dfe4ec' stroke-width='4'/><line x1='700.0' y1='-50.0' x2='500.0' y2='-50.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='600.0' y='-95.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>49</text><text x='470.0' y='-50.0' font-size='60' fill='#e6e9ef' text-anchor='end' dominant-baseline='central'>PA13</text><g class='pingroup' data-num='48' data-name='VDD'><line class='pinvis' x1='700.0' y1='50.0' x2='500.0' y2='50.0' stroke='#dfe4ec' stroke-width='4'/><line x1='700.0' y1='50.0' x2='500.0' y2='50.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='600.0' y='5.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>48</text><text x='470.0' y='50.0' font-size='60' fill='#e6e9ef' text-anchor='end' dominant-baseline='central'>VDD</text><g class='pingroup' data-num='47' data-name='VSS'><line class='pinvis' x1='700.0' y1='150.0' x2='500.0' y2='150.0' stroke='#dfe4ec' stroke-width='4'/><line x1='700.0' y1='150.0' x2='500.0' y2='150.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='600.0' y='105.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>47</text><text x='470.0' y='150.0' font-size='60' fill='#e6e9ef' text-anchor='end' dominant-baseline='central'>VSS</text><g class='pingroup' data-num='46' data-name='PA12'><line class='pinvis' x1='700.0' y1='250.0' x2='500.0' y2='250.0' stroke='#dfe4ec' stroke-width='4'/><line x1='700.0' y1='250.0' x2='500.0' y2='250.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='600.0' y='205.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>46</text><text x='470.0' y='250.0' font-size='60' fill='#e6e9ef' text-anchor='end' dominant-baseline='central'>PA12</text><g class='pingroup' data-num='45' data-name='PA11'><line class='pinvis' x1='700.0' y1='350.0' x2='500.0' y2='350.0' stroke='#dfe4ec' stroke-width='4'/><line x1='700.0' y1='350.0' x2='500.0' y2='350.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='600.0' y='305.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>45</text><text x='470.0' y='350.0' font-size='60' fill='#e6e9ef' text-anchor='end' dominant-baseline='central'>PA11</text><g class='pingroup' data-num='44' data-name='PA10'><line class='pinvis' x1='700.0' y1='450.0' x2='500.0' y2='450.0' stroke='#dfe4ec' stroke-width='4'/><line x1='700.0' y1='450.0' x2='500.0' y2='450.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='600.0' y='405.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>44</text><text x='470.0' y='450.0' font-size='60' fill='#e6e9ef' text-anchor='end' dominant-baseline='central'>PA10</text><g class='pingroup' data-num='43' data-name='PA9'><line class='pinvis' x1='700.0' y1='550.0' x2='500.0' y2='550.0' stroke='#dfe4ec' stroke-width='4'/><line x1='700.0' y1='550.0' x2='500.0' y2='550.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='600.0' y='505.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>43</text><text x='470.0' y='550.0' font-size='60' fill='#e6e9ef' text-anchor='end' dominant-baseline='central'>PA9</text><g class='pingroup' data-num='42' data-name='PA8'><line class='pinvis' x1='700.0' y1='650.0' x2='500.0' y2='650.0' stroke='#dfe4ec' stroke-width='4'/><line x1='700.0' y1='650.0' x2='500.0' y2='650.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='600.0' y='605.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>42</text><text x='470.0' y='650.0' font-size='60' fill='#e6e9ef' text-anchor='end' dominant-baseline='central'>PA8</text><g class='pingroup' data-num='41' data-name='PC9'><line class='pinvis' x1='700.0' y1='750.0' x2='500.0' y2='750.0' stroke='#dfe4ec' stroke-width='4'/><line x1='700.0' y1='750.0' x2='500.0' y2='750.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='600.0' y='705.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>41</text><text x='470.0' y='750.0' font-size='60' fill='#e6e9ef' text-anchor='end' dominant-baseline='central'>PC9</text><g class='pingroup' data-num='40' data-name='PC8'><line class='pinvis' x1='700.0' y1='850.0' x2='500.0' y2='850.0' stroke='#dfe4ec' stroke-width='4'/><line x1='700.0' y1='850.0' x2='500.0' y2='850.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='600.0' y='805.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>40</text><text x='470.0' y='850.0' font-size='60' fill='#e6e9ef' text-anchor='end' dominant-baseline='central'>PC8</text><g class='pingroup' data-num='39' data-name='PC7'><line class='pinvis' x1='700.0' y1='950.0' x2='500.0' y2='950.0' stroke='#dfe4ec' stroke-width='4'/><line x1='700.0' y1='950.0' x2='500.0' y2='950.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='600.0' y='905.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>39</text><text x='470.0' y='950.0' font-size='60' fill='#e6e9ef' text-anchor='end' dominant-baseline='central'>PC7</text><g class='pingroup' data-num='38' data-name='PC6'><line class='pinvis' x1='700.0' y1='1050.0' x2='500.0' y2='1050.0' stroke='#dfe4ec' stroke-width='4'/><line x1='700.0' y1='1050.0' x2='500.0' y2='1050.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='600.0' y='1005.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>38</text><text x='470.0' y='1050.0' font-size='60' fill='#e6e9ef' text-anchor='end' dominant-baseline='central'>PC6</text><g class='pingroup' data-num='37' data-name='PB15'><line class='pinvis' x1='700.0' y1='1150.0' x2='500.0' y2='1150.0' stroke='#dfe4ec' stroke-width='4'/><line x1='700.0' y1='1150.0' x2='500.0' y2='1150.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='600.0' y='1105.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>37</text><text x='470.0' y='1150.0' font-size='60' fill='#e6e9ef' text-anchor='end' dominant-baseline='central'>PB15</text><g class='pingroup' data-num='36' data-name='PB14'><line class='pinvis' x1='700.0' y1='1250.0' x2='500.0' y2='1250.0' stroke='#dfe4ec' stroke-width='4'/><line x1='700.0' y1='1250.0' x2='500.0' y2='1250.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='600.0' y='1205.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>36</text><text x='470.0' y='1250.0' font-size='60' fill='#e6e9ef' text-anchor='end' dominant-baseline='central'>PB14</text><g class='pingroup' data-num='35' data-name='PB13'><line class='pinvis' x1='700.0' y1='1350.0' x2='500.0' y2='1350.0' stroke='#dfe4ec' stroke-width='4'/><line x1='700.0' y1='1350.0' x2='500.0' y2='1350.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='600.0' y='1305.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>35</text><text x='470.0' y='1350.0' font-size='60' fill='#e6e9ef' text-anchor='end' dominant-baseline='central'>PB13</text><g class='pingroup' data-num='34' data-name='PB12'><line class='pinvis' x1='700.0' y1='1450.0' x2='500.0' y2='1450.0' stroke='#dfe4ec' stroke-width='4'/><line x1='700.0' y1='1450.0' x2='500.0' y2='1450.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='600.0' y='1405.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>34</text><text x='470.0' y='1450.0' font-size='60' fill='#e6e9ef' text-anchor='end' dominant-baseline='central'>PB12</text><g class='pingroup' data-num='33' data-name='PB11'><line class='pinvis' x1='700.0' y1='1550.0' x2='500.0' y2='1550.0' stroke='#dfe4ec' stroke-width='4'/><line x1='700.0' y1='1550.0' x2='500.0' y2='1550.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='600.0' y='1505.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>33</text><text x='470.0' y='1550.0' font-size='60' fill='#e6e9ef' text-anchor='end' dominant-baseline='central'>PB11</text></svg></div>-<div id=tip></div>-<script>-var KIND="symbol", MPN="ADOM/STM32G474RET6", PINS=[{"desc":"","name":"VBAT","number":"1","type":""},{"desc":"","name":"PC13","number":"2","type":""},{"desc":"","name":"PC14-OSC32_IN","number":"3","type":""},{"desc":"","name":"PC15-OSC32_OUT","number":"4","type":""},{"desc":"","name":"PF0-OSC_IN","number":"5","type":""},{"desc":"","name":"PF1-OSC_OUT","number":"6","type":""},{"desc":"","name":"PG10-NRST","number":"7","type":""},{"desc":"","name":"PC0","number":"8","type":""},{"desc":"","name":"PC1","number":"9","type":""},{"desc":"","name":"PC2","number":"10","type":""},{"desc":"","name":"PC3","number":"11","type":""},{"desc":"","name":"PA0","number":"12","type":""},{"desc":"","name":"PA1","number":"13","type":""},{"desc":"","name":"PA2","number":"14","type":""},{"desc":"","name":"VSS","number":"15","type":""},{"desc":"","name":"VDD","number":"16","type":""},{"desc":"","name":"PA3","number":"17","type":""},{"desc":"","name":"PA4","number":"18","type":""},{"desc":"","name":"PA5","number":"19","type":""},{"desc":"","name":"PA6","number":"20","type":""},{"desc":"","name":"PA7","number":"21","type":""},{"desc":"","name":"PC4","number":"22","type":""},{"desc":"","name":"PC5","number":"23","type":""},{"desc":"","name":"PB0","number":"24","type":""},{"desc":"","name":"PB1","number":"25","type":""},{"desc":"","name":"PB2","number":"26","type":""},{"desc":"","name":"VSSA","number":"27","type":""},{"desc":"","name":"VREF+","number":"28","type":""},{"desc":"","name":"VDDA","number":"29","type":""},{"desc":"","name":"PB10","number":"30","type":""},{"desc":"","name":"VSS","number":"31","type":""},{"desc":"","name":"VDD","number":"32","type":""},{"desc":"","name":"VDD","number":"64","type":""},{"desc":"","name":"VSS","number":"63","type":""},{"desc":"","name":"PB9","number":"62","type":""},{"desc":"","name":"PB8-BOOT0","number":"61","type":""},{"desc":"","name":"PB7","number":"60","type":""},{"desc":"","name":"PB6","number":"59","type":""},{"desc":"","name":"PB5","number":"58","type":""},{"desc":"","name":"PB4","number":"57","type":""},{"desc":"","name":"PB3","number":"56","type":""},{"desc":"","name":"PD2","number":"55","type":""},{"desc":"","name":"PC12","number":"54","type":""},{"desc":"","name":"PC11","number":"53","type":""},{"desc":"","name":"PC10","number":"52","type":""},{"desc":"","name":"PA15","number":"51","type":""},{"desc":"","name":"PA14","number":"50","type":""},{"desc":"","name":"PA13","number":"49","type":""},{"desc":"","name":"VDD","number":"48","type":""},{"desc":"","name":"VSS","number":"47","type":""},{"desc":"","name":"PA12","number":"46","type":""},{"desc":"","name":"PA11","number":"45","type":""},{"desc":"","name":"PA10","number":"44","type":""},{"desc":"","name":"PA9","number":"43","type":""},{"desc":"","name":"PA8","number":"42","type":""},{"desc":"","name":"PC9","number":"41","type":""},{"desc":"","name":"PC8","number":"40","type":""},{"desc":"","name":"PC7","number":"39","type":""},{"desc":"","name":"PC6","number":"38","type":""},{"desc":"","name":"PB15","number":"37","type":""},{"desc":"","name":"PB14","number":"36","type":""},{"desc":"","name":"PB13","number":"35","type":""},{"desc":"","name":"PB12","number":"34","type":""},{"desc":"","name":"PB11","number":"33","type":""}];-var byNum={}; PINS.forEach(function(p){byNum[String(p.number)]=p;});-var stage=document.getElementById('stage'), svg=stage.querySelector('svg'), tip=document.getElementById('tip');-// ---- pan/zoom -----var vb=(svg.getAttribute('viewBox')||'0 0 100 100').split(/\s+/).map(Number), base=vb.slice();-function setVB(){svg.setAttribute('viewBox',vb.join(' '));}-stage.addEventListener('wheel',function(e){e.preventDefault();var r=stage.getBoundingClientRect();var mx=(e.clientX-r.left)/r.width,my=(e.clientY-r.top)/r.height;var f=e.deltaY<0?0.88:1.14;var nw=vb[2]*f,nh=vb[3]*f;vb[0]+=(vb[2]-nw)*mx;vb[1]+=(vb[3]-nh)*my;vb[2]=nw;vb[3]=nh;setVB();},{passive:false});-var pan=null;-stage.addEventListener('pointerdown',function(e){pan={x:e.clientX,y:e.clientY};stage.classList.add('drag');stage.setPointerCapture(e.pointerId);});-stage.addEventListener('pointermove',function(e){if(!pan)return;var r=stage.getBoundingClientRect();vb[0]-=(e.clientX-pan.x)/r.width*vb[2];vb[1]-=(e.clientY-pan.y)/r.height*vb[3];pan={x:e.clientX,y:e.clientY};setVB();});-function endPan(){pan=null;stage.classList.remove('drag');}-stage.addEventListener('pointerup',endPan);stage.addEventListener('pointerleave',endPan);-stage.addEventListener('dblclick',function(){vb=base.slice();setVB();});-// ---- cross-highlight bus -----function els(n){return [].slice.call(document.querySelectorAll('[data-num="'+n+'"]'));}-function clearHi(){[].slice.call(document.querySelectorAll('.hi')).forEach(function(e){e.classList.remove('hi');});}-function hi(n){els(n).forEach(function(e){e.classList.add('hi');});}-function post(n){try{parent.postMessage({type:'lbr-hover',pin:n===null?null:String(n),mpn:MPN},'*');}catch(_){}}-function showTip(n,x,y){var p=byNum[String(n)];if(!p)return;tip.innerHTML='<span class=tn></span><div class=tt></div><div class=td></div>';tip.querySelector('.tn').textContent=n+'  '+(p.name||'');tip.querySelector('.tt').textContent=p.type||'';var d=p.desc||'';if(d)tip.querySelector('.td').textContent=d;else tip.querySelector('.td').style.display='none';tip.style.display='block';tip.style.left=(x+14)+'px';tip.style.top=(y+12)+'px';}-[].slice.call(document.querySelectorAll('.pingroup,.pad')).forEach(function(g){-  var n=g.getAttribute('data-num');-  g.addEventListener('mouseenter',function(e){clearHi();hi(n);post(n);showTip(n,e.clientX,e.clientY);});-  g.addEventListener('mousemove',function(e){tip.style.left=(e.clientX+14)+'px';tip.style.top=(e.clientY+12)+'px';});-  g.addEventListener('mouseleave',function(){clearHi();post(null);tip.style.display='none';});-});-window.addEventListener('message',function(e){var d=e.data||{};if(d.type!=='lbr-hover')return;clearHi();if(d.pin!=null)hi(d.pin);});-// ---- footprint layer toggles -----[].slice.call(document.querySelectorAll('.lyrtog')).forEach(function(b){-  function apply(on){[].slice.call(document.querySelectorAll('.ly-'+b.getAttribute('data-lyr'))).forEach(function(el){el.classList.toggle('lyr-off',!on);});}-  apply(b.classList.contains('on'));-  b.addEventListener('click',function(){apply(b.classList.toggle('on'));});-});-// ---- auto-grow the host readme iframe -----function ph(){var h=Math.max(360,Math.min(16000,document.body.scrollHeight||420));parent.postMessage({type:'readme-height',height:h},'*');}-window.addEventListener('load',ph);setTimeout(ph,300);-</script>-</body></html>+<!doctype html><title>stm32g474ret6</title>\ No newline at end of file