main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers stm32g473cet6: viewers · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
stm32g473cet6-etched.glb Publish 0.1.0 · Ray
stm32g473cet6-etched.step stm32g473cet6: factory component page (tier=mfr) · Ray
stm32g473cet6-hero.glb stm32g473cet6: hero GLB from the etched model (keeps the MPN mark) · Ray
stm32g473cet6-hero.overlay.json Publish 0.1.0 · Ray
stm32g473cet6.glb Publish 0.1.0 · Ray
stm32g473cet6.kicad_mod Publish 0.1.0 · Ray
stm32g473cet6.kicad_sym Publish 0.1.0 · Ray
stm32g473cet6.lbr Publish 0.1.0 · Ray
stm32g473cet6.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 48 pins · Ray

STM32G473CET6

STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · LQFP-48(7x7)

STM32G473CET6 from STMicroelectronics, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VBAT power_in Backup-domain supply for the RTC and backup registers, with an operating range of 1.55 V to 3.6 V.
2 PC13 bidirectional 5 V tolerant GPIO supplied through the power switch, which sinks only 3 mA, so output speed must not exceed 2 MHz at 30 pF and it must not source current such as an LED drive.
3 PC14-OSC32_IN bidirectional 5 V tolerant GPIO supplied through the power switch (same 3 mA and 2 MHz output limits as PC13), also serving as the 32 kHz oscillator input OSC32_IN.
4 PC15-OSC32_OUT bidirectional 5 V tolerant GPIO supplied through the power switch (same 3 mA and 2 MHz output limits as PC13), also serving as the 32 kHz oscillator output OSC32_OUT.
5 PF0-OSC_IN bidirectional 5 V tolerant Fm+ capable I/O whose additional function is the high-speed crystal oscillator input OSC_IN.
6 PF1-OSC_OUT bidirectional I/O with analog switch function supplied by VDDA, whose additional function is the high-speed crystal oscillator output OSC_OUT.
7 PG10-NRST bidirectional Bidirectional reset pin with an embedded weak pull-up resistor.
8 PA0 bidirectional 3.6 V tolerant I/O with analog switch function supplied by VDDA, also providing ADC12_IN1, COMP1_INM, COMP3_INP, RTC_TAMP2 and WKUP1.
9 PA1 bidirectional 3.6 V tolerant I/O with analog switch function supplied by VDDA, also providing ADC12_IN2 and COMP1_INP.
10 PA2 bidirectional 5 V tolerant I/O with analog switch function supplied by VDDA, also providing ADC1_IN3 and COMP2_INM.
11 PA3 bidirectional 3.6 V tolerant I/O with analog switch function supplied by VDDA, also providing ADC1_IN4 and COMP2_INP.
12 PA4 bidirectional 3.6 V tolerant I/O with analog switch function supplied by VDDA, also providing ADC2_IN17, DAC1_OUT1 and COMP1_INM.
13 PA5 bidirectional 3.6 V tolerant I/O with analog switch function supplied by VDDA, also providing ADC2_IN13 and DAC1_OUT2.
14 PA6 bidirectional 3.6 V tolerant I/O with analog switch function supplied by VDDA, also providing ADC2_IN3, DAC2_OUT1 and OPAMP2_VOUT.
15 PA7 bidirectional 3.6 V tolerant I/O with analog switch function supplied by VDDA, also providing ADC2_IN4, COMP2_INP and OPAMP1_VINP.
16 PB0 bidirectional 3.6 V tolerant I/O with analog switch function supplied by VDDA, also providing ADC3_IN12/ADC1_IN15 and COMP4_INP.
17 PB1 bidirectional 3.6 V tolerant I/O with analog switch function supplied by VDDA, also providing ADC3_IN1/ADC1_IN12 and COMP1_INP.
18 PB2 bidirectional 3.6 V tolerant I/O with analog switch function supplied by VDDA, also providing ADC2_IN12, COMP4_INM and OPAMP3_VINM.
19 VSSA power_in Analog ground for the ADC, DAC, OPAMP, COMP and VREFBUF blocks, to be connected to the ground supply.
20 VREF+ power_in Positive voltage reference input for the ADCs and DACs, also carrying the VREFBUF_OUT function on this package.
21 VDDA power_in Analog supply: 1.62 V minimum for the ADC, 1.8 V minimum for the DAC, OPAMP and COMP, 2.4 V minimum when VREFBUF is used, up to 3.6 V.
22 PB10 bidirectional 3.6 V tolerant I/O with analog switch function supplied by VDDA, also providing COMP5_INM, OPAMP3_VINM and OPAMP4_VINM.
23 VSS power_in Digital ground, to be connected to the ground supply.
24 VDD power_in Digital supply with a standard operating voltage of 1.71 V to 3.6 V.
25 PB11 bidirectional 3.6 V tolerant I/O with analog switch function supplied by VDDA, also providing ADC12_IN14, COMP6_INP and OPAMP4_VINP.
26 PB12 bidirectional 3.6 V tolerant I/O with analog switch function supplied by VDDA, also providing ADC4_IN3/ADC1_IN11, COMP7_INM and OPAMP4_VOUT.
27 PB13 bidirectional 3.6 V tolerant I/O with analog switch function supplied by VDDA, also providing ADC3_IN5, COMP5_INP and OPAMP3_VINP.
28 PB14 bidirectional 3.6 V tolerant I/O with analog switch function supplied by VDDA, also providing ADC4_IN4/ADC1_IN5, COMP7_INP and OPAMP2_VINP.
29 PB15 bidirectional 3.6 V tolerant I/O with analog switch function supplied by VDDA, also providing RTC_REFIN, COMP6_INM and OPAMP5_VINM.
30 PA8 bidirectional 5 V tolerant I/O with analog switch function supplied by VDDA, also providing MCO and ADC5_IN1.
31 PA9 bidirectional 5 V tolerant I/O with Fm+ capability and USB Type-C PD dead-battery capability (UCPD1_DBCC1), also providing ADC5_IN2.
32 PA10 bidirectional 5 V tolerant I/O with Fm+ capability and USB Type-C PD dead-battery capability (UCPD1_DBCC2).
33 PA11 bidirectional I/O with USB function, providing the USB_DM data line.
34 PA12 bidirectional I/O with USB function, providing the USB_DP data line.
35 VSS power_in Digital ground, to be connected to the ground supply.
36 VDD power_in Digital supply with a standard operating voltage of 1.71 V to 3.6 V.
37 PA13 bidirectional Fm+ capable I/O that after reset is configured as the SWDIO-JTMS debug function with its internal pull-up activated.
38 PA14 bidirectional Fm+ capable I/O that after reset is configured as the SWCLK-JTCK debug function with its internal pull-down activated.
39 PA15 bidirectional Fm+ capable I/O that after reset is configured as the JTDI debug function with its internal pull-up activated.
40 PB3 bidirectional 5 V tolerant I/O that after reset is configured as the JTDO-TRACESWO debug function.
41 PB4 bidirectional USB Type-C PD capable I/O that after reset is configured as the JTRST debug function with its internal pull-up activated, also providing UCPD1_CC2.
42 PB5 bidirectional Fm+ capable 5 V tolerant I/O with alternate functions including SPI1_MOSI and I2C1_SMBA.
43 PB6 bidirectional USB Type-C PD capable 5 V tolerant I/O, also providing UCPD1_CC1 and USART1_TX.
44 PB7 bidirectional Fm+ capable 5 V tolerant I/O, also providing the PVD_IN input for the programmable voltage detector.
45 PB8-BOOT0 bidirectional Fm+ capable 5 V tolerant I/O that doubles as the BOOT0 pin; it is recommended to set it out of analog mode after startup to limit consumption if left unconnected.
46 PB9 bidirectional Fm+ capable 5 V tolerant I/O, also providing IR_OUT, USART3_TX and COMP2_OUT.
47 VSS power_in Digital ground, to be connected to the ground supply.
48 VDD power_in Digital supply with a standard operating voltage of 1.71 V to 3.6 V.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package LQFP-48(7x7)
Category Embedded Processors & Controllers
Pins 48

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Standard operating voltage VDD 1.71 3.6 V 80
Analog supply voltage ADC VDDA 1.62 3.6 V ADC 80
Analog supply voltage DAC or OPAMP VDDA 1.8 3.6 V DAC 1 MSPS or DAC 15 MSPS or OPAMP 80
Analog supply voltage COMP VDDA 1.8 3.6 V COMP used 80
Analog supply voltage VREFBUF VDDA 2.4 V VREFBUF used 80
Backup operating voltage VBAT 1.55 3.6 V 80
Input voltage FT_c pins VIN -0.3 5 V FT_c 80
Ambient temperature suffix 6 maximum power dissipation TA -40 85 °C Suffix 6 version, maximum power dissipation 80
Ambient temperature suffix 6 low-power dissipation TA -40 105 °C Suffix 6 version, low-power dissipation 80
Junction temperature range suffix 6 TJ -40 105 °C Suffix 6 version 80
Internal AHB clock frequency fHCLK 0 170 MHz 80
Internal APB1 clock frequency fPCLK1 0 170 MHz 80
External main supply voltage VDD-VSS -0.3 4 V Including VDD, VDDA and VBAT 78
Input voltage on TT_xx pins VIN -0.3 4 V Input voltage on TT_xx pins 78
Input voltage on FT_c pins VIN -0.3 5.5 V Input voltage on FT_c pins 78
Total current into sum of all VDD power lines ΣIVDD 150 mA Source 79
Total current out of sum of all VSS ground lines ΣIVSS 150 mA Sink 79
Maximum current into each VDD power pin IVDD(PIN) 100 mA Source 79
Maximum current out of each VSS ground pin IVSS(PIN) 100 mA Sink 79
Output current sunk by any I/O and control pin IIO(PIN) 20 mA Except FT_f pin 79
Output current sourced by any I/O and control pin IIO(PIN) 20 mA Sourced 79
Total output current sunk by sum of all I/Os and control pins ΣIIO(PIN) 100 mA Sunk 79
Total output current sourced by sum of all I/Os and control pins ΣIIO(PIN) 100 mA Sourced 79
Injected current on FT_xxx, TT_xx, NRST pins IINJ(PIN) -5 0 mA Printed as -5/0 79
Total injected current sum of all I/Os and control pins ΣIINJ(PIN) 25 mA Absolute sum of negative injected currents 79
Storage temperature range TSTG -65 150 °C 79
Maximum junction temperature TJ 150 °C 79
Internal reference voltage VREFINT 1.182 1.212 1.232 V -40 °C < TA < +130 °C 84
Average temperature coefficient TCoeff 30 50 ppm/°C -40°C < TA < +130°C 84
Average voltage coefficient VDDCoeff 250 1200 ppm/V 3.0 V < VDD < 3.6 V 84
Reset temporization after BOR0 is detected tRSTTEMPO 250 400 μs VDD rising 82
Brown-out reset threshold 0 rising edge VBOR0 1.62 1.66 1.7 V Rising edge 82
Brown-out reset threshold 0 falling edge VBOR0 1.6 1.64 1.69 V Falling edge 82
Supply current in Standby mode, backup registers retained, RTC disabled IDD(Standby) 130 350 nA VDD 3.0 V, 25°C, no independent watchdog 106
Supply current in Run mode, Range 1 Boost, 170 MHz IDD (Run) 29.5 30 mA Range 1 Boost mode, 170 MHz, Flash single bank ART enable, all peripherals disabled, 25°C 86

CAD (KiCad official)

  • Symbol: STM32G473CET6
  • Footprint: Package_QFP:LQFP-48_7x7mm_P0.5mm
  • 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
  • 3D model files: stm32g473cet6-etched.step / stm32g473cet6-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm32g473cet6.step / stm32g473cet6.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (223 pp, sha256 63caa155ed7b741d, retrieved 2026-11-05, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF