component

STM32G0B1KBU6

Public Made by Adom

STMicroelectronics Microcontrollers, UFQFPN-32(5x5). KiCad symbol, footprint and 3D as used on Adom boards; pin functions from the manufacturer datasheet.

Verified STM32G0B1KBU6

by Claude, at Caleb Taylor's request · last 28 Oct 2026 · 1 record · files match

SymbolFootprint3D modelPins

Verification log 6 records

28 Oct 2026Claude, at Caleb Taylor's requestValidated against ST's STM32G0B1xB/xC/xE datasheet DS13560 Rev 6 (February 2026)files match

SymbolFootprint3D modelPinsfor all variants

✓Datasheet: replaced the LCSC copy (DS13560 Rev 3, January 2022) with ST's current DS13560 Rev 6, February 2026, from st.com
✓Variant: STM32G0B1KBU6 = K 32 pins, B 128 KB, U UFQFPN, 6 = -40 to 85 C, no N option, so the GP pinout applies (ordering information p.161; N-suffix devices are the alternative pinout, p.11)
✓All 33 pins match Figure 4 'STM32G0B1KxU UFQFPN32 pinout', GP version (p.37) and the LQFP32/UFQFPN32-GP column of Table 12 (p.47-55) by number and name, including PC14-OSC32_IN, PC15-OSC32_OUT, VDD/VDDA, VSS/VSSA, PF2-NRST, PA11 [PA9], PA12 [PA10], PA14-BOOT0; pin 33 is the exposed pad, labelled VSS in Figure 4. No renames needed
✓Pin types agree with Table 12: the 30 port pins are I/O (bidirectional; PF2-NRST is RST/FT), VDD/VDDA and VSS/VSSA are supply (power_in); exposed pad 33 changed passive -> power_in (VSS ground)
✓All 33 descriptions rewritten from Table 12 rows (I/O structure decoded with Table 11 p.46, alternate and additional functions, notes 1-6 on p.55), the power supply scheme (p.17) and Figure 4; citations re-pointed from Rev 3 to Rev 6 pages
•Footprint (designer custom STM_CDT UFQFPN-32-1EP 5x5) vs Figure 41/Table 83 (p.130-131) and Figure 42 footprint example (p.133): 32 pads 0.25 mm wide on e = 0.50 mm, as Figure 42; pads 0.875 mm long with centres at +/-2.4375 mm (span 2.00 to 2.875 mm from centre) vs Figure 42's 0.65 mm pads in a 5.50 mm outline (2.10 to 2.75 mm): longer by 0.10 mm inward and 0.125 mm outward, still covering the terminals (D/2 = 2.50, L 0.30-0.50, b 0.18-0.30) with 0.25 mm clearance to the exposed pad; exposed pad 3.50 x 3.50 mm = Figure 42 and D2/E2 typ (3.40-3.60), with four 1.41 mm paste windows; pin 1 at the top of the left column, numbering counter-clockwise as Figure 42
✓3D model rebuilt (tier 3): the previous model was extracted from a board STEP with no licence. Tier 1 unusable (ST's CAD sits behind a my.st.com login/e-mail validation via SamacSys/Ultra Librarian, whose terms forbid library redistribution); tier 2 unusable (KiCad has no UFQFPN-32 EP3.5 model; QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mm is 0.77 mm tall vs A 0.50-0.60). Generated with kicad-footprint-generator @ 6ef68694 package/no_lead at DS13560 Table 83 values (patch in provenance/tools), CC-BY-SA-4.0
✓3D body vs Figure 41/Table 83 (p.130-131): 5.00 x 5.00 x 0.55 mm (D = E 5.00 BSC, A 0.50-0.60); 32 terminals 0.40 x 0.25 mm at the edge on e = 0.50 (L 0.30-0.50, b 0.18-0.30), centres on the footprint pad centres; exposed pad 3.50 x 3.50 mm (D2/E2 3.40-3.60); pin-1 dimple top-left over pad 1 and bottom view pin 1 lower left as Figure 41 (docs/proof/stm32g0b1kbu6-3d-model.png)
✓Pose: stm32g0b1kbu6.step and -etched.step Z-up, seated on z = 0, centred on the pad pattern (offset 0), footprint model binding identity (step_pose.py PASS); MPN etched on the top face with adom-chip-laser 0.2.0; GLBs from step2glb 0.13.2 (glTF-Transform, KHR_mesh_quantization) with PBR materials set by colour
•Not modelled: Figure 41's exposed-pad terminal-1 chamfer and corner radii (undimensioned, figure not to scale); terminal thickness A3 (not printed) left at the generator's 0.11 mm
✓DigiKey 497-STM32G0B1KBU6-ND and Mouser 511-STM32G0B1KBU6 confirmed as STM32G0B1KBU6 by STMicroelectronics (2026-10-27)
✓Symbol Datasheet / MPN / Manufacturer / DigiKey / Mouser / LCSC properties agree with page.json; footprint Datasheet property points at the manufacturer datasheet URL
✓component-page-verify: all checks pass; adom-lbr validate OK

Evidencedatasheet (STMicroelectronics, DS13560 Rev 6)3D model views vs Figure 41 3D model provenance

Verified files✓ stm32g0b1kbu6.kicad_sym✓ stm32g0b1kbu6.kicad_mod✓ stm32g0b1kbu6.step

16 Oct 2026Claude (AI build)Datasheet pins not matched to a symbol pin: EPsuperseded

reviewfor all variants

•Datasheet pins not matched to a symbol pin: EP

16 Oct 2026Claude (AI build)3D model provenance: extracted from the source board STEP export (designer custom library ...superseded

reviewfor all variants

•3D model provenance: extracted from the source board STEP export (designer custom library STM_CDT); the upstream model licence is not stated, so the page licence is NOASSERTION.

16 Oct 2026Claude (AI build)Footprint is the designer custom STM_CDT:STM32G0B1_UFQFPN-32-1EP_5x5mm_P0.5mm_EP3.5x3.5mm;...superseded

reviewfor all variants

•Footprint is the designer custom STM_CDT:STM32G0B1_UFQFPN-32-1EP_5x5mm_P0.5mm_EP3.5x3.5mm; check it against the UFQFPN32 package drawing.

16 Oct 2026Claude (AI build)Symbol pin names changed to the datasheet spelling (Figure 12, GP version): PC14-OSC32_IN,...superseded

reviewfor all variants

•Symbol pin names changed to the datasheet spelling (Figure 12, GP version): PC14-OSC32_IN, PC15-OSC32_OUT, VDD/VDDA, VSS/VSSA, PF2-NRST, PA9, PA10, PA11 [PA9], PA12 [PA10], PA14-BOOT0.

16 Oct 2026Claude (AI build)Automated build checks (awaiting human validation)superseded

SymbolFootprint3D modelPinsfor all variants

✓Footprint extracted pad-for-pad from the source board and normalized to the footprint frame (back-side parts un-mirrored)
✓3D model seated z=0 at footprint origin (placement inverse; method centroid-matched to KiCad library models on 59 cases)
✓adom-lbr generate + lint passed
✓33 of 33 pins described from the datasheet (adom-ds2sf, page-cited)
•Not yet checked by a person: land pattern vs datasheet, pin-1/orientation, 3D body vs drawing

Evidencedatasheet

Verified files! stm32g0b1kbu6.kicad_sym✓ stm32g0b1kbu6.kicad_mod! stm32g0b1kbu6.step

Spot something wrong? Report it as an issue · Propose a fix Records are signed by members of adom.