main
Ray Publish 0.1.0 5e2adff
{
  "slug": "stm32g0b1cbu6",
  "version": "0.1.0",
  "type": "component",
  "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), UFQFPN-48(7x7). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "embedded processors & controllers",
    "stm32g0b1cbu6",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "stm32g0b1cbu6.kicad_sym",
    "stm32g0b1cbu6.kicad_mod",
    "stm32g0b1cbu6.glb",
    "stm32g0b1cbu6.step",
    "stm32g0b1cbu6.lbr",
    "docs/hero.png",
    "docs/stm32g0b1cbu6-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "stm32g0b1cbu6-hero.glb",
    "stm32g0b1cbu6-hero.overlay.json"
  ],
  "component": {
    "mpn": "STM32G0B1CBU6",
    "manufacturer": "STMicroelectronics",
    "package": "UFQFPN-48(7x7)",
    "pin_count": 49,
    "category": "Embedded Processors & Controllers",
    "subcategory": "Microcontrollers (MCU/MPU/SOC)",
    "datasheet": "https://www.st.com/resource/en/datasheet/stm32g0b1ce.pdf",
    "parts": {
      "symbol": "stm32g0b1cbu6.kicad_sym",
      "footprint": "stm32g0b1cbu6.kicad_mod",
      "model_3d": "stm32g0b1cbu6-hero.glb",
      "model_3d_plain": "stm32g0b1cbu6.glb",
      "model_3d_step": "stm32g0b1cbu6-etched.step",
      "model_3d_step_plain": "stm32g0b1cbu6.step",
      "lbr": "stm32g0b1cbu6.lbr"
    },
    "distributor_links": {
      "lcsc": "C5270156",
      "digikey": "497-STM32G0B1CBU6-ND",
      "mouser": "511-STM32G0B1CBU6"
    },
    "distributor_check": {
      "checked_at": "2026-11-12T19:38:42Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "497-STM32G0B1CBU6-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "511-STM32G0B1CBU6",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "PC13",
        "type": "bidirectional",
        "description": "FT I/O supplied through the power switch, limited to 3 mA so it can only sink current and output speed is capped at 2 MHz with 30 pF; alternate TIM1_BKIN, additional TAMP_IN1, RTC_TS, RTC_OUT1, WKUP2."
      },
      {
        "number": "2",
        "name": "PC14-OSC32_IN",
        "type": "bidirectional",
        "description": "FT I/O supplied through the power switch (3 mA limit, sink-only in output use) that serves as LSE oscillator input OSC32_IN; alternate TIM1_BKIN2."
      },
      {
        "number": "3",
        "name": "PC15-OSC32_OUT",
        "type": "bidirectional",
        "description": "FT I/O supplied through the power switch (3 mA limit, sink-only in output use) that serves as LSE oscillator output OSC32_OUT; alternates OSC32_EN, OSC_EN, TIM15_BKIN."
      },
      {
        "number": "4",
        "name": "VBAT",
        "type": "power_in",
        "description": "Power supply 1.55 V to 3.6 V for RTC, TAMP, LSE and backup registers when VDD is not present, provided through a power switch."
      },
      {
        "number": "5",
        "name": "VREF+",
        "type": "power_in",
        "description": "Analog reference input, or output of the internal voltage reference buffer (VREFBUF_OUT); when VDDA < 2 V it must equal VDDA, when VDDA ≥ 2 V it must be between 2 V and VDDA, and it can be grounded if analog peripherals are inactive."
      },
      {
        "number": "6",
        "name": "VDD/VDDA",
        "type": "power_in",
        "description": "Main supply 1.7 V to 3.6 V for the internal regulator, I/Os and system analog, with VDDA 1.62 V (ADC, COMP), 1.8 V (DAC) or 2.4 V (VREFBUF) minimum up to 3.6 V."
      },
      {
        "number": "7",
        "name": "VSS/VSSA",
        "type": "power_in",
        "description": "Ground reference for digital and analog supplies; all voltages in the datasheet are referenced to VSS."
      },
      {
        "number": "8",
        "name": "PF0-OSC_IN",
        "type": "bidirectional",
        "description": "FT I/O that serves as HSE crystal oscillator input OSC_IN (4 to 48 MHz crystal); alternates CRS1_SYNC, EVENTOUT, TIM14_CH1."
      },
      {
        "number": "9",
        "name": "PF1-OSC_OUT",
        "type": "bidirectional",
        "description": "FT I/O that serves as HSE crystal oscillator output OSC_OUT; alternates OSC_EN, EVENTOUT, TIM15_CH1N."
      },
      {
        "number": "10",
        "name": "PF2-NRST",
        "type": "bidirectional",
        "description": "Reset pin with embedded weak pull-up (RST structure) when configured as reset and FT GPIO when configured as GPIO; alternates MCO, LPUART2_TX, LPUART2_RTS_DE."
      },
      {
        "number": "11",
        "name": "PA0",
        "type": "bidirectional",
        "description": "FT_a I/O with analog switch function; alternates SPI2_SCK/I2S2_CK, USART2_CTS, TIM2_CH1_ETR, USART4_TX, LPTIM1_OUT, UCPD2_FRSTX, COMP1_OUT; additional COMP1_INM8, ADC_IN0, TAMP_IN2, WKUP1."
      },
      {
        "number": "12",
        "name": "PA1",
        "type": "bidirectional",
        "description": "FT_ea I/O with analog switch and switchable diode to VDDIOx; alternates SPI1_SCK/I2S1_CK, USART2_RTS_DE_CK, TIM2_CH2, USART4_RX, TIM15_CH1N, I2C1_SMBA, EVENTOUT; additional COMP1_INP2, ADC_IN1."
      },
      {
        "number": "13",
        "name": "PA2",
        "type": "bidirectional",
        "description": "FT_a I/O with analog switch function; alternates SPI1_MOSI/I2S1_SD, USART2_TX, TIM2_CH3, UCPD1_FRSTX, TIM15_CH1, LPUART1_TX, COMP2_OUT; additional COMP2_INM8, ADC_IN2, WKUP4, LSCO."
      },
      {
        "number": "14",
        "name": "PA3",
        "type": "bidirectional",
        "description": "FT_ea I/O with analog switch and switchable diode to VDDIOx; alternates SPI2_MISO/I2S2_MCK, USART2_RX, TIM2_CH4, UCPD2_FRSTX, TIM15_CH2, LPUART1_RX, EVENTOUT; additional COMP2_INP2, ADC_IN3."
      },
      {
        "number": "15",
        "name": "PA4",
        "type": "bidirectional",
        "description": "TT_a I/O (3.6 V tolerant) with analog switch function; alternates SPI1_NSS/I2S1_WS, SPI2_MOSI/I2S2_SD, USART6_TX, TIM14_CH1, LPTIM2_OUT, UCPD2_FRSTX, EVENTOUT, SPI3_NSS; additional ADC_IN4, DAC1_OUT1, RTC_OUT2."
      },
      {
        "number": "16",
        "name": "PA5",
        "type": "bidirectional",
        "description": "TT_ea I/O (3.6 V tolerant) with analog switch and switchable diode to VDDIOx; alternates SPI1_SCK/I2S1_CK, CEC, TIM2_CH1_ETR, USART6_RX, USART3_TX, LPTIM2_ETR, UCPD1_FRSTX, EVENTOUT; additional ADC_IN5, DAC1_OUT2."
      },
      {
        "number": "17",
        "name": "PA6",
        "type": "bidirectional",
        "description": "FT_ea I/O with analog switch and switchable diode to VDDIOx; alternates SPI1_MISO/I2S1_MCK, TIM3_CH1, TIM1_BKIN, USART6_CTS, USART3_CTS, TIM16_CH1, LPUART1_CTS, COMP1_OUT, I2C2_SDA, I2C3_SDA; additional ADC_IN6."
      },
      {
        "number": "18",
        "name": "PA7",
        "type": "bidirectional",
        "description": "FT_a I/O with analog switch function; alternates SPI1_MOSI/I2S1_SD, TIM3_CH2, TIM1_CH1N, USART6_RTS_DE_CK, TIM14_CH1, TIM17_CH1, UCPD1_FRSTX, COMP2_OUT, I2C2_SCL, I2C3_SCL; additional ADC_IN7."
      },
      {
        "number": "19",
        "name": "PB0",
        "type": "bidirectional",
        "description": "FT_ea I/O with analog switch and switchable diode to VDDIOx; alternates SPI1_NSS/I2S1_WS, TIM3_CH3, TIM1_CH2N, FDCAN2_RX, USART3_RX, LPTIM1_OUT, UCPD1_FRSTX, COMP1_OUT, USART5_TX, LPUART2_CTS; additional COMP3_INP0, ADC_IN8."
      },
      {
        "number": "20",
        "name": "PB1",
        "type": "bidirectional",
        "description": "FT_ea I/O with analog switch and switchable diode to VDDIOx; alternates TIM14_CH1, TIM3_CH4, TIM1_CH3N, FDCAN2_TX, USART3_RTS_DE_CK, LPTIM2_IN1, LPUART1_RTS_DE, COMP3_OUT, USART5_RX, LPUART2_RTS_DE; additional COMP1_INM6, ADC_IN9."
      },
      {
        "number": "21",
        "name": "PB2",
        "type": "bidirectional",
        "description": "FT_ea I/O with analog switch and switchable diode to VDDIOx; alternates SPI2_MISO/I2S2_MCK, MCO2, USART3_TX, LPTIM1_OUT, EVENTOUT; additional COMP1_INP1, COMP3_INM6, ADC_IN10."
      },
      {
        "number": "22",
        "name": "PB10",
        "type": "bidirectional",
        "description": "FT_fa I/O (Fm+ capable, analog switch); alternates CEC, LPUART1_RX, TIM2_CH3, USART3_TX, SPI2_SCK/I2S2_CK, I2C2_SCL, COMP1_OUT; additional ADC_IN11."
      },
      {
        "number": "23",
        "name": "PB11",
        "type": "bidirectional",
        "description": "FT_fa I/O (Fm+ capable, analog switch); alternates SPI2_MOSI/I2S2_SD, LPUART1_TX, TIM2_CH4, USART3_RX, I2C2_SDA, COMP2_OUT; additional ADC_IN15."
      },
      {
        "number": "24",
        "name": "PB12",
        "type": "bidirectional",
        "description": "FT_fa I/O (Fm+ capable, analog switch); alternates SPI2_NSS/I2S2_WS, LPUART1_RTS_DE, TIM1_BKIN, FDCAN2_RX, TIM15_BKIN, UCPD2_FRSTX, EVENTOUT, I2C2_SMBA; additional ADC_IN16."
      },
      {
        "number": "25",
        "name": "PB13",
        "type": "bidirectional",
        "description": "FT_fs I/O (Fm+ capable, supplied from VDDIO2 only); alternates SPI2_SCK/I2S2_CK, LPUART1_CTS, TIM1_CH1N, FDCAN2_TX, USART3_CTS, TIM15_CH1N, I2C2_SCL, EVENTOUT."
      },
      {
        "number": "26",
        "name": "PB14",
        "type": "bidirectional",
        "description": "FT_fs I/O (Fm+ capable, supplied from VDDIO2 only); alternates SPI2_MISO/I2S2_MCK, UCPD1_FRSTX, TIM1_CH2N, USART3_RTS_DE_CK, TIM15_CH1, I2C2_SDA, EVENTOUT, USART6_RTS_DE_CK."
      },
      {
        "number": "27",
        "name": "PB15",
        "type": "bidirectional",
        "description": "FT_fcs I/O (Fm+ capable, USB Type-C PD capable, supplied from VDDIO2 only); may have a pull-down at reset depending on PA9 level; alternates SPI2_MOSI/I2S2_SD, TIM1_CH3N, TIM15_CH1N, TIM15_CH2, EVENTOUT, USART6_CTS; additional UCPD1_CC2, RTC_REFIN."
      },
      {
        "number": "28",
        "name": "PA8",
        "type": "bidirectional",
        "description": "FT_fcs I/O (Fm+ capable, USB Type-C PD capable, supplied from VDDIO2 only); may have a pull-down at reset depending on PA10 level; alternates MCO, SPI2_NSS/I2S2_WS, TIM1_CH1, CRS1_SYNC, LPTIM2_OUT, EVENTOUT, I2C2_SMBA; additional UCPD1_CC1."
      },
      {
        "number": "29",
        "name": "PA9",
        "type": "bidirectional",
        "description": "FT_fds I/O (Fm+ capable, USB Type-C PD dead battery, supplied from VDDIO2 only); alternates MCO, USART1_TX, TIM1_CH2, SPI2_MISO/I2S2_MCK, TIM15_BKIN, I2C1_SCL, EVENTOUT, I2C2_SCL; additional UCPD1_DBCC1."
      },
      {
        "number": "30",
        "name": "PC6",
        "type": "bidirectional",
        "description": "FT_s I/O supplied from VDDIO2 only (internally connected to VDD on this package); alternates UCPD1_FRSTX, TIM3_CH1, TIM2_CH3, LPUART2_TX."
      },
      {
        "number": "31",
        "name": "PC7",
        "type": "bidirectional",
        "description": "FT_s I/O supplied from VDDIO2 only (internally connected to VDD on this package); alternates UCPD2_FRSTX, TIM3_CH2, TIM2_CH4, LPUART2_RX."
      },
      {
        "number": "32",
        "name": "PA10",
        "type": "bidirectional",
        "description": "FT_fds I/O (Fm+ capable, USB Type-C PD dead battery, supplied from VDDIO2 only); alternates SPI2_MOSI/I2S2_SD, USART1_RX, TIM1_CH3, MCO2, TIM17_BKIN, I2C1_SDA, EVENTOUT, I2C2_SDA; additional UCPD1_DBCC2."
      },
      {
        "number": "33",
        "name": "PA11 [PA9]",
        "type": "bidirectional",
        "description": "FT_fus I/O (Fm+ capable, with USB function) that can be remapped in place of PA9 via SYSCFG_CFGR1; alternates SPI1_MISO/I2S1_MCK, USART1_CTS, TIM1_CH4, FDCAN1_RX, TIM1_BKIN2, I2C2_SCL, COMP1_OUT; additional USB_DM."
      },
      {
        "number": "34",
        "name": "PA12 [PA10]",
        "type": "bidirectional",
        "description": "FT_fus I/O (Fm+ capable, with USB function) that can be remapped in place of PA10 via SYSCFG_CFGR1; alternates SPI1_MOSI/I2S1_SD, USART1_RTS_DE_CK, TIM1_ETR, FDCAN1_TX, I2S_CKIN, I2C2_SDA, COMP2_OUT; additional USB_DP."
      },
      {
        "number": "35",
        "name": "PA13",
        "type": "bidirectional",
        "description": "FT_es I/O (switchable diode to VDDIOx, supplied from VDDIO2 only); configured as SWDIO with internal pull-up after reset; alternates IR_OUT, USB_NOE, EVENTOUT, LPUART2_RX."
      },
      {
        "number": "36",
        "name": "PA14-BOOT0",
        "type": "bidirectional",
        "description": "FT_s I/O supplied from VDDIO2 only; configured as SWCLK with internal pull-down after reset and used as BOOT0; alternates USART2_TX, EVENTOUT, LPUART2_TX."
      },
      {
        "number": "37",
        "name": "PA15",
        "type": "bidirectional",
        "description": "FT_s I/O supplied from VDDIO2 only; alternates SPI1_NSS/I2S1_WS, USART2_RX, TIM2_CH1_ETR, MCO2, USART4_RTS_DE_CK, USART3_RTS_DE_CK, USB_NOE, EVENTOUT, I2C2_SMBA, SPI3_NSS."
      },
      {
        "number": "38",
        "name": "PD0",
        "type": "bidirectional",
        "description": "FT_cs I/O supplied from VDDIO2 only; may have a pull-down at reset depending on PD1 level; alternates EVENTOUT, SPI2_NSS/I2S2_WS, TIM16_CH1, FDCAN1_RX; additional UCPD2_CC1."
      },
      {
        "number": "39",
        "name": "PD1",
        "type": "bidirectional",
        "description": "FT_ds I/O supplied from VDDIO2 only; alternates EVENTOUT, SPI2_SCK/I2S2_CK, TIM17_CH1, FDCAN1_TX; additional UCPD2_DBCC1."
      },
      {
        "number": "40",
        "name": "PD2",
        "type": "bidirectional",
        "description": "FT_cs I/O supplied from VDDIO2 only; may have a pull-down at reset depending on PD3 level; alternates USART3_RTS_DE_CK, TIM3_ETR, TIM1_CH1N, USART5_RX; additional UCPD2_CC2."
      },
      {
        "number": "41",
        "name": "PD3",
        "type": "bidirectional",
        "description": "FT_ds I/O supplied from VDDIO2 only; alternates USART2_CTS, SPI2_MISO/I2S2_MCK, TIM1_CH2N, USART5_TX; additional UCPD2_DBCC2."
      },
      {
        "number": "42",
        "name": "PB3",
        "type": "bidirectional",
        "description": "FT_a I/O with analog switch function; alternates SPI1_SCK/I2S1_CK, TIM1_CH2, TIM2_CH2, USART5_TX, USART1_RTS_DE_CK, I2C3_SCL, EVENTOUT, I2C2_SCL, SPI3_SCK; additional COMP2_INM6."
      },
      {
        "number": "43",
        "name": "PB4",
        "type": "bidirectional",
        "description": "FT_a I/O with analog switch function; alternates SPI1_MISO/I2S1_MCK, TIM3_CH1, USART5_RX, USART1_CTS, TIM17_BKIN, I2C3_SDA, EVENTOUT, I2C2_SDA, SPI3_MISO; additional COMP2_INP0."
      },
      {
        "number": "44",
        "name": "PB5",
        "type": "bidirectional",
        "description": "FT I/O; alternates SPI1_MOSI/I2S1_SD, TIM3_CH2, TIM16_BKIN, FDCAN2_RX, LPTIM1_IN1, I2C1_SMBA, COMP2_OUT, USART5_RTS_DE_CK, SPI3_MOSI; additional WKUP6."
      },
      {
        "number": "45",
        "name": "PB6",
        "type": "bidirectional",
        "description": "FT_fa I/O (Fm+ capable, analog switch); alternates USART1_TX, TIM1_CH3, TIM16_CH1N, FDCAN2_TX, SPI2_MISO/I2S2_MCK, LPTIM1_ETR, I2C1_SCL, EVENTOUT, USART5_CTS, TIM4_CH1, LPUART2_TX; additional COMP2_INP1."
      },
      {
        "number": "46",
        "name": "PB7",
        "type": "bidirectional",
        "description": "FT_fa I/O (Fm+ capable, analog switch); alternates USART1_RX, SPI2_MOSI/I2S2_SD, TIM17_CH1N, USART4_CTS, LPTIM1_IN2, I2C1_SDA, EVENTOUT, TIM4_CH2, LPUART2_RX; additional COMP2_INM7, PVD_IN."
      },
      {
        "number": "47",
        "name": "PB8",
        "type": "bidirectional",
        "description": "FT_f I/O (Fm+ capable); alternates CEC, SPI2_SCK/I2S2_CK, TIM16_CH1, FDCAN1_RX, USART3_TX, TIM15_BKIN, I2C1_SCL, EVENTOUT, USART6_TX, TIM4_CH3."
      },
      {
        "number": "48",
        "name": "PB9",
        "type": "bidirectional",
        "description": "FT_f I/O (Fm+ capable); alternates IR_OUT, UCPD2_FRSTX, TIM17_CH1, FDCAN1_TX, USART3_RX, SPI2_NSS/I2S2_WS, I2C1_SDA, EVENTOUT, USART6_RX, TIM4_CH4."
      },
      {
        "number": "49",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The UFQFPN48 package has an exposed die pad on its underside (labelled VSS in Figure 6, and recommen; Per Table 2 and Section 3.7.1, the 48-pin GP version (_CB/_CC/_CE) has no VDDIO2 pin. VDDIO2 is inte; Table 12 footnote 1: PC13, PC14 and PC15 are powered through the power switch, which supplies only 3"
        ],
        "pages_sent": 90,
        "cost_usd": 0.0347,
        "at": "2026-11-12T19:38:27"
      },
      "datasheet": {
        "url": "https://www.st.com/resource/en/datasheet/stm32g0b1ce.pdf",
        "pages": 165,
        "sha256": "8433e47bc5da5cac",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "model_3d_generated": {
        "generator": "factory/gen_pkg3d.py",
        "family": "QFN",
        "height_mm": 0.55,
        "height_basis": "datasheet A, nominal",
        "standoff_mm": 0.0
      },
      "pins": {
        "total": 49,
        "described": 49,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "stm32g0b1cbu6.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.02,
          7.02,
          0.55
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "5faddacd79a0ff4c1a018c9d93a235f5e9339045c68ff132ad9b7efc6aac7de0",
        "checked": "2026-11-12",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "stm32g0b1cbu6-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.02,
          7.02,
          0.55
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "373f59b223f4542c02a77ebd40367a956aa4c9840a2a1e30cf36ff3d4c6002ab",
        "checked": "2026-11-12",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "UFQFPN48 (A0B9)",
      "source_page": 138,
      "D": {
        "nom_mm": 7.0,
        "range_mm": [
          6.9,
          7.1
        ]
      },
      "E1": {
        "nom_mm": 7.0,
        "range_mm": [
          6.9,
          7.1
        ]
      },
      "e": {
        "nom_mm": 0.5,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 0.55,
        "range_mm": [
          0.5,
          0.6
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "stm32g0b1cbu6.step",
        "verdict": "PASS",
        "reasons": [
          "height within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}