Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

STM32G0B1CBU6

STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · UFQFPN-48(7x7)

STM32G0B1CBU6 from STMicroelectronics, in a UFQFPN-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PC13 bidirectional FT I/O supplied through the power switch, limited to 3 mA so it can only sink current and output speed is capped at 2 MHz with 30 pF; alternate TIM1_BKIN, additional TAMP_IN1, RTC_TS, RTC_OUT1, WKUP2.
2 PC14-OSC32_IN bidirectional FT I/O supplied through the power switch (3 mA limit, sink-only in output use) that serves as LSE oscillator input OSC32_IN; alternate TIM1_BKIN2.
3 PC15-OSC32_OUT bidirectional FT I/O supplied through the power switch (3 mA limit, sink-only in output use) that serves as LSE oscillator output OSC32_OUT; alternates OSC32_EN, OSC_EN, TIM15_BKIN.
4 VBAT power_in Power supply 1.55 V to 3.6 V for RTC, TAMP, LSE and backup registers when VDD is not present, provided through a power switch.
5 VREF+ power_in Analog reference input, or output of the internal voltage reference buffer (VREFBUF_OUT); when VDDA < 2 V it must equal VDDA, when VDDA ≥ 2 V it must be between 2 V and VDDA, and it can be grounded if analog peripherals are inactive.
6 VDD/VDDA power_in Main supply 1.7 V to 3.6 V for the internal regulator, I/Os and system analog, with VDDA 1.62 V (ADC, COMP), 1.8 V (DAC) or 2.4 V (VREFBUF) minimum up to 3.6 V.
7 VSS/VSSA power_in Ground reference for digital and analog supplies; all voltages in the datasheet are referenced to VSS.
8 PF0-OSC_IN bidirectional FT I/O that serves as HSE crystal oscillator input OSC_IN (4 to 48 MHz crystal); alternates CRS1_SYNC, EVENTOUT, TIM14_CH1.
9 PF1-OSC_OUT bidirectional FT I/O that serves as HSE crystal oscillator output OSC_OUT; alternates OSC_EN, EVENTOUT, TIM15_CH1N.
10 PF2-NRST bidirectional Reset pin with embedded weak pull-up (RST structure) when configured as reset and FT GPIO when configured as GPIO; alternates MCO, LPUART2_TX, LPUART2_RTS_DE.
11 PA0 bidirectional FT_a I/O with analog switch function; alternates SPI2_SCK/I2S2_CK, USART2_CTS, TIM2_CH1_ETR, USART4_TX, LPTIM1_OUT, UCPD2_FRSTX, COMP1_OUT; additional COMP1_INM8, ADC_IN0, TAMP_IN2, WKUP1.
12 PA1 bidirectional FT_ea I/O with analog switch and switchable diode to VDDIOx; alternates SPI1_SCK/I2S1_CK, USART2_RTS_DE_CK, TIM2_CH2, USART4_RX, TIM15_CH1N, I2C1_SMBA, EVENTOUT; additional COMP1_INP2, ADC_IN1.
13 PA2 bidirectional FT_a I/O with analog switch function; alternates SPI1_MOSI/I2S1_SD, USART2_TX, TIM2_CH3, UCPD1_FRSTX, TIM15_CH1, LPUART1_TX, COMP2_OUT; additional COMP2_INM8, ADC_IN2, WKUP4, LSCO.
14 PA3 bidirectional FT_ea I/O with analog switch and switchable diode to VDDIOx; alternates SPI2_MISO/I2S2_MCK, USART2_RX, TIM2_CH4, UCPD2_FRSTX, TIM15_CH2, LPUART1_RX, EVENTOUT; additional COMP2_INP2, ADC_IN3.
15 PA4 bidirectional TT_a I/O (3.6 V tolerant) with analog switch function; alternates SPI1_NSS/I2S1_WS, SPI2_MOSI/I2S2_SD, USART6_TX, TIM14_CH1, LPTIM2_OUT, UCPD2_FRSTX, EVENTOUT, SPI3_NSS; additional ADC_IN4, DAC1_OUT1, RTC_OUT2.
16 PA5 bidirectional TT_ea I/O (3.6 V tolerant) with analog switch and switchable diode to VDDIOx; alternates SPI1_SCK/I2S1_CK, CEC, TIM2_CH1_ETR, USART6_RX, USART3_TX, LPTIM2_ETR, UCPD1_FRSTX, EVENTOUT; additional ADC_IN5, DAC1_OUT2.
17 PA6 bidirectional FT_ea I/O with analog switch and switchable diode to VDDIOx; alternates SPI1_MISO/I2S1_MCK, TIM3_CH1, TIM1_BKIN, USART6_CTS, USART3_CTS, TIM16_CH1, LPUART1_CTS, COMP1_OUT, I2C2_SDA, I2C3_SDA; additional ADC_IN6.
18 PA7 bidirectional FT_a I/O with analog switch function; alternates SPI1_MOSI/I2S1_SD, TIM3_CH2, TIM1_CH1N, USART6_RTS_DE_CK, TIM14_CH1, TIM17_CH1, UCPD1_FRSTX, COMP2_OUT, I2C2_SCL, I2C3_SCL; additional ADC_IN7.
19 PB0 bidirectional FT_ea I/O with analog switch and switchable diode to VDDIOx; alternates SPI1_NSS/I2S1_WS, TIM3_CH3, TIM1_CH2N, FDCAN2_RX, USART3_RX, LPTIM1_OUT, UCPD1_FRSTX, COMP1_OUT, USART5_TX, LPUART2_CTS; additional COMP3_INP0, ADC_IN8.
20 PB1 bidirectional FT_ea I/O with analog switch and switchable diode to VDDIOx; alternates TIM14_CH1, TIM3_CH4, TIM1_CH3N, FDCAN2_TX, USART3_RTS_DE_CK, LPTIM2_IN1, LPUART1_RTS_DE, COMP3_OUT, USART5_RX, LPUART2_RTS_DE; additional COMP1_INM6, ADC_IN9.
21 PB2 bidirectional FT_ea I/O with analog switch and switchable diode to VDDIOx; alternates SPI2_MISO/I2S2_MCK, MCO2, USART3_TX, LPTIM1_OUT, EVENTOUT; additional COMP1_INP1, COMP3_INM6, ADC_IN10.
22 PB10 bidirectional FT_fa I/O (Fm+ capable, analog switch); alternates CEC, LPUART1_RX, TIM2_CH3, USART3_TX, SPI2_SCK/I2S2_CK, I2C2_SCL, COMP1_OUT; additional ADC_IN11.
23 PB11 bidirectional FT_fa I/O (Fm+ capable, analog switch); alternates SPI2_MOSI/I2S2_SD, LPUART1_TX, TIM2_CH4, USART3_RX, I2C2_SDA, COMP2_OUT; additional ADC_IN15.
24 PB12 bidirectional FT_fa I/O (Fm+ capable, analog switch); alternates SPI2_NSS/I2S2_WS, LPUART1_RTS_DE, TIM1_BKIN, FDCAN2_RX, TIM15_BKIN, UCPD2_FRSTX, EVENTOUT, I2C2_SMBA; additional ADC_IN16.
25 PB13 bidirectional FT_fs I/O (Fm+ capable, supplied from VDDIO2 only); alternates SPI2_SCK/I2S2_CK, LPUART1_CTS, TIM1_CH1N, FDCAN2_TX, USART3_CTS, TIM15_CH1N, I2C2_SCL, EVENTOUT.
26 PB14 bidirectional FT_fs I/O (Fm+ capable, supplied from VDDIO2 only); alternates SPI2_MISO/I2S2_MCK, UCPD1_FRSTX, TIM1_CH2N, USART3_RTS_DE_CK, TIM15_CH1, I2C2_SDA, EVENTOUT, USART6_RTS_DE_CK.
27 PB15 bidirectional FT_fcs I/O (Fm+ capable, USB Type-C PD capable, supplied from VDDIO2 only); may have a pull-down at reset depending on PA9 level; alternates SPI2_MOSI/I2S2_SD, TIM1_CH3N, TIM15_CH1N, TIM15_CH2, EVENTOUT, USART6_CTS; additional UCPD1_CC2, RTC_REFIN.
28 PA8 bidirectional FT_fcs I/O (Fm+ capable, USB Type-C PD capable, supplied from VDDIO2 only); may have a pull-down at reset depending on PA10 level; alternates MCO, SPI2_NSS/I2S2_WS, TIM1_CH1, CRS1_SYNC, LPTIM2_OUT, EVENTOUT, I2C2_SMBA; additional UCPD1_CC1.
29 PA9 bidirectional FT_fds I/O (Fm+ capable, USB Type-C PD dead battery, supplied from VDDIO2 only); alternates MCO, USART1_TX, TIM1_CH2, SPI2_MISO/I2S2_MCK, TIM15_BKIN, I2C1_SCL, EVENTOUT, I2C2_SCL; additional UCPD1_DBCC1.
30 PC6 bidirectional FT_s I/O supplied from VDDIO2 only (internally connected to VDD on this package); alternates UCPD1_FRSTX, TIM3_CH1, TIM2_CH3, LPUART2_TX.
31 PC7 bidirectional FT_s I/O supplied from VDDIO2 only (internally connected to VDD on this package); alternates UCPD2_FRSTX, TIM3_CH2, TIM2_CH4, LPUART2_RX.
32 PA10 bidirectional FT_fds I/O (Fm+ capable, USB Type-C PD dead battery, supplied from VDDIO2 only); alternates SPI2_MOSI/I2S2_SD, USART1_RX, TIM1_CH3, MCO2, TIM17_BKIN, I2C1_SDA, EVENTOUT, I2C2_SDA; additional UCPD1_DBCC2.
33 PA11 [PA9] bidirectional FT_fus I/O (Fm+ capable, with USB function) that can be remapped in place of PA9 via SYSCFG_CFGR1; alternates SPI1_MISO/I2S1_MCK, USART1_CTS, TIM1_CH4, FDCAN1_RX, TIM1_BKIN2, I2C2_SCL, COMP1_OUT; additional USB_DM.
34 PA12 [PA10] bidirectional FT_fus I/O (Fm+ capable, with USB function) that can be remapped in place of PA10 via SYSCFG_CFGR1; alternates SPI1_MOSI/I2S1_SD, USART1_RTS_DE_CK, TIM1_ETR, FDCAN1_TX, I2S_CKIN, I2C2_SDA, COMP2_OUT; additional USB_DP.
35 PA13 bidirectional FT_es I/O (switchable diode to VDDIOx, supplied from VDDIO2 only); configured as SWDIO with internal pull-up after reset; alternates IR_OUT, USB_NOE, EVENTOUT, LPUART2_RX.
36 PA14-BOOT0 bidirectional FT_s I/O supplied from VDDIO2 only; configured as SWCLK with internal pull-down after reset and used as BOOT0; alternates USART2_TX, EVENTOUT, LPUART2_TX.
37 PA15 bidirectional FT_s I/O supplied from VDDIO2 only; alternates SPI1_NSS/I2S1_WS, USART2_RX, TIM2_CH1_ETR, MCO2, USART4_RTS_DE_CK, USART3_RTS_DE_CK, USB_NOE, EVENTOUT, I2C2_SMBA, SPI3_NSS.
38 PD0 bidirectional FT_cs I/O supplied from VDDIO2 only; may have a pull-down at reset depending on PD1 level; alternates EVENTOUT, SPI2_NSS/I2S2_WS, TIM16_CH1, FDCAN1_RX; additional UCPD2_CC1.
39 PD1 bidirectional FT_ds I/O supplied from VDDIO2 only; alternates EVENTOUT, SPI2_SCK/I2S2_CK, TIM17_CH1, FDCAN1_TX; additional UCPD2_DBCC1.
40 PD2 bidirectional FT_cs I/O supplied from VDDIO2 only; may have a pull-down at reset depending on PD3 level; alternates USART3_RTS_DE_CK, TIM3_ETR, TIM1_CH1N, USART5_RX; additional UCPD2_CC2.
41 PD3 bidirectional FT_ds I/O supplied from VDDIO2 only; alternates USART2_CTS, SPI2_MISO/I2S2_MCK, TIM1_CH2N, USART5_TX; additional UCPD2_DBCC2.
42 PB3 bidirectional FT_a I/O with analog switch function; alternates SPI1_SCK/I2S1_CK, TIM1_CH2, TIM2_CH2, USART5_TX, USART1_RTS_DE_CK, I2C3_SCL, EVENTOUT, I2C2_SCL, SPI3_SCK; additional COMP2_INM6.
43 PB4 bidirectional FT_a I/O with analog switch function; alternates SPI1_MISO/I2S1_MCK, TIM3_CH1, USART5_RX, USART1_CTS, TIM17_BKIN, I2C3_SDA, EVENTOUT, I2C2_SDA, SPI3_MISO; additional COMP2_INP0.
44 PB5 bidirectional FT I/O; alternates SPI1_MOSI/I2S1_SD, TIM3_CH2, TIM16_BKIN, FDCAN2_RX, LPTIM1_IN1, I2C1_SMBA, COMP2_OUT, USART5_RTS_DE_CK, SPI3_MOSI; additional WKUP6.
45 PB6 bidirectional FT_fa I/O (Fm+ capable, analog switch); alternates USART1_TX, TIM1_CH3, TIM16_CH1N, FDCAN2_TX, SPI2_MISO/I2S2_MCK, LPTIM1_ETR, I2C1_SCL, EVENTOUT, USART5_CTS, TIM4_CH1, LPUART2_TX; additional COMP2_INP1.
46 PB7 bidirectional FT_fa I/O (Fm+ capable, analog switch); alternates USART1_RX, SPI2_MOSI/I2S2_SD, TIM17_CH1N, USART4_CTS, LPTIM1_IN2, I2C1_SDA, EVENTOUT, TIM4_CH2, LPUART2_RX; additional COMP2_INM7, PVD_IN.
47 PB8 bidirectional FT_f I/O (Fm+ capable); alternates CEC, SPI2_SCK/I2S2_CK, TIM16_CH1, FDCAN1_RX, USART3_TX, TIM15_BKIN, I2C1_SCL, EVENTOUT, USART6_TX, TIM4_CH3.
48 PB9 bidirectional FT_f I/O (Fm+ capable); alternates IR_OUT, UCPD2_FRSTX, TIM17_CH1, FDCAN1_TX, USART3_RX, SPI2_NSS/I2S2_WS, I2C1_SDA, EVENTOUT, USART6_RX, TIM4_CH4.
49 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package UFQFPN-48(7x7)
Category Embedded Processors & Controllers
Pins 49

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
External supply voltage VDD -0.3 4 V 66
External supply voltage for selected I/Os VDDIO2 -0.3 4 V 66
External supply voltage on VBAT pin VBAT -0.3 4 V 66
External voltage on VREF+ pin VREF+ -0.3 V 66
Input voltage on FT_xx pins except FT_c and FT_s VIN -0.3 V 66
Input voltage on FT_c pins VIN -0.3 5.5 V 66
Input voltage on any other pin VIN -0.3 4 V 66
Current into VDD/VDDA and VDDIO2 power pins (source) IVDD/VDDA,VDDIO2 100 mA 66
Current out of VSS/VSSA and VSS ground pins (sink) IVSS/VSSA,VSS 100 mA 66
Output current sunk by any I/O and control pin except FT_f IIO(PIN) 15 mA 67
Output current sunk by any FT_f pin IIO(PIN) 20 mA 67
Output current sourced by any I/O and control pin IIO(PIN) 15 mA 67
Total output current sunk by sum of all I/Os and control pins ∑IIO(PIN) 80 mA 67
Total output current sourced by sum of all I/Os and control pins ∑IIO(PIN) 80 mA 67
Injected current on a FT_xx pin IINJ(PIN) -5 mA 67
Total injected current (sum of all I/Os and control pins) ∑/IINJ(PIN)/ 25 mA 67
Storage temperature range TSTG -65 150 °C 67
Maximum junction temperature TJ 150 °C 67
Internal AHB clock frequency fHCLK 0 64 MHz 67
Standard operating voltage VDD 1.7 3.6 V 67
External supply voltage for selected I/Os VDDIO2 1.65 3.6 V 67
Analog supply voltage VDDA 1.62 3.6 V For ADC and COMP operation 67
Analog supply voltage VDDA 1.8 3.6 V For DAC operation 67
Analog supply voltage VDDA 2.4 3.6 V For VREFBUF operation 67
Backup operating voltage VBAT 1.55 3.6 V 67
Ambient temperature TA -40 85 °C Suffix 6 68
Junction temperature TJ -40 105 °C Suffix 6 68
VDD slew rate tVDD 10 µs/V VDD falling; ULPEN = 0 68
VDD slew rate tVDD 100 ms/V VDD falling; ULPEN = 1 68
POR temporization when VDD crosses VPOR tRSTTEMPO 250 400 µs VDD rising 68
Power-on reset threshold VPOR 1.62 1.66 1.7 V 68
Power-down reset threshold VPDR 1.6 1.64 1.69 V 68
Brownout reset threshold 1 VBOR1 2.05 2.1 2.18 V VDD rising 68
Brownout reset threshold 1 VBOR1 1.95 2 2.08 V VDD falling 68
Internal reference voltage VREFINT 1.182 1.212 1.232 V -40°C < TJ < 130°C 70
Temperature coefficient TCoeff_vrefint 30 50 ppm/°C 70
Voltage coefficient VDDCoeff 250 1200 ppm/V 3.0 V < VDD < 3.6 V 70
Supply current in Run mode (from flash memory) IDD(Run) 8.6 9.7 mA Range 1; PLL enabled; fHCLK = 64 MHz; flash; typ at 25 °C, max at 130 °C column 72
Supply current in Low-power run mode IDD(LPRun) 280 1515 µA PLL disabled; fHCLK = 2 MHz; flash; typ at 25 °C, max at 130 °C column 72
Supply current in Sleep mode IDD(Sleep) 1.9 3.3 mA Range 1; fHCLK = 64 MHz; flash enabled; all peripherals disabled; typ at 25 °C, max at 130 °C column 74
Supply current in Stop 0 mode IDD(Stop 0) 300 1050 µA HSI kernel enabled; VDD 3.6 V; typ at 25 °C, max at 130 °C column 74
Supply current in Stop 1 mode IDD(Stop 1) 3.6 500 µA Flash not powered; RTC disabled; VDD 3.6 V; typ at 25 °C, max at 130 °C column 75
Supply current in Standby mode IDD(Standby) 0.3 74 µA RTC disabled; VDD 3.6 V; typ at 25 °C, max at 130 °C column 75
Supply current in Shutdown mode IDD(Shutdown) 57 59400 nA RTC disabled; VDD 3.6 V; typ at 25 °C, max at 130 °C column 76
Wakeup time from Stop 0 tWUSTOP0 5.6 6 µs Transiting to Run-mode execution in flash memory not powered in Stop 0 mode; HCLK = HSI16 = 16 MHz; Regulator in Range 1 or Range 2 80
Wakeup time from Stop 1 tWUSTOP1 9 11.2 µs Transiting to Run-mode execution in flash memory not powered in Stop 1 mode; HCLK = HSI16 = 16 MHz; Regulator in Range 1 or Range 2 80
Wakeup time from Standby mode tWUSTBY 14.5 30 µs Transiting to Run mode; HCLK = HSI16 = 16 MHz; Regulator in Range 1 80
Wakeup time from Shutdown mode tWUSHDN 258 340 µs Transiting to Run mode; HCLK = HSI16 = 16 MHz; Regulator in Range 1 80
Transition times between regulator Range 1 and Range 2 tVOST 20 40 µs HSISYS = HSI16 81
User external clock source frequency fHSE_ext 8 48 MHz Voltage scaling Range 1 81
User external clock source frequency fHSE_ext 8 26 MHz Voltage scaling Range 2 81
Oscillator frequency fOSC_IN 4 8 48 MHz 83
Maximum critical crystal transconductance Gm 1.5 mA/V Startup 83
HSI16 Frequency fHSI16 15.88 16.08 MHz VDD=3.0 V, TA=30 °C 86
HSI16 oscillator frequency drift over temperature ∆Temp(HSI16) -1 1 % TA = 0 to 85 °C 86
HSI16 oscillator frequency drift over temperature ∆Temp(HSI16) -2 1.5 % TA = -40 to 125 °C 86
LSI frequency fLSI 29.5 34 kHz VDD = 1.62 V to 3.6 V, TA = -40 to 125 °C 88
PLL input clock frequency fPLL_IN 2.66 16 MHz 88
PLL VCO output fVCO_OUT 96 344 MHz Voltage scaling Range 1 88
PLL VCO output fVCO_OUT 96 128 MHz Voltage scaling Range 2 88

CAD (KiCad official)

  • Symbol: STM32G0B1CBU6
  • Footprint: Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm
  • 3D model: UFQFPN-48(7x7), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.55 mm tall, datasheet A, nominal). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: stm32g0b1cbu6-etched.step / stm32g0b1cbu6-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm32g0b1cbu6.step / stm32g0b1cbu6.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (165 pp, sha256 8433e47bc5da5cac, retrieved 2026-11-12, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF