component
STM32G0B0VET6
Public Made by Adomby adom
STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-100(14x14). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
STM32G0B0VET6
STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · LQFP-100(14x14)
STM32G0B0VET6 from STMicroelectronics, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PB9 | bidirectional | 5 V-tolerant Fm+-capable I/O (FT_f); alternate functions include IR_OUT, TIM17_CH1, USART3_RX, SPI2_NSS/I2S2_WS, I2C1_SDA, USART6_RX and TIM4_CH4. |
| 2 | PC10 | bidirectional | 5 V-tolerant I/O (FT); alternate functions include USART3_TX, USART4_TX, TIM1_CH3 and SPI3_SCK. |
| 3 | PC11 | bidirectional | 5 V-tolerant I/O (FT); alternate functions include USART3_RX, USART4_RX, TIM1_CH4 and SPI3_MISO. |
| 4 | PE4 | bidirectional | 5 V-tolerant I/O (FT) with TIM3_CH2 as its listed alternate function. |
| 5 | PE5 | bidirectional | 5 V-tolerant I/O (FT) with TIM3_CH3 as its listed alternate function. |
| 6 | PE6 | bidirectional | 5 V-tolerant I/O (FT) with TIM3_CH4 as alternate function and TAMP_IN3 and WKUP3 as additional functions. |
| 7 | PC12 | bidirectional | 5 V-tolerant I/O (FT); alternate functions include TIM14_CH1, USART5_TX and SPI3_MOSI. |
| 8 | PC13 | bidirectional | 5 V-tolerant I/O (FT) supplied through the power switch, limited to 3 mA, so output speed must not exceed 2 MHz at 30 pF maximum load and it can only be used as a current sink; alternate function TIM1_BKIN, additional functions TAMP_IN1, RTC_TS, RTC_OUT1 and WKUP2. |
| 9 | PC14-OSC32_IN | bidirectional | 5 V-tolerant I/O (FT) supplied through the power switch with the same 3 mA limit as PC13, sharing its output-speed and current-sink restrictions; it is also the 32 kHz oscillator input OSC32_IN. |
| 10 | PC15-OSC32_OUT | bidirectional | 5 V-tolerant I/O (FT) supplied through the power switch with the same 3 mA limit as PC13, sharing its output-speed and current-sink restrictions; it is also the 32 kHz oscillator output OSC32_OUT. |
| 11 | VBAT | power_in | Battery backup supply input that keeps the RTC and backup registers powered (VBAT supply feature). |
| 12 | VREF+ | power_in | Positive ADC reference voltage input, whose range is 2 V to VDDA and which is internally connected to VDDA on some packages. |
| 13 | VDD/VDDA | power_in | Digital and analog supply pin for the 2.0 V to 3.6 V operating voltage range. |
| 14 | VSS/VSSA | power_in | Ground pin for digital and analog circuits; all voltages are referenced to VSS. |
| 15 | PF0-OSC_IN | bidirectional | 5 V-tolerant I/O (FT) with TIM14_CH1 and EVENTOUT as alternate functions, and the high-speed oscillator input OSC_IN as additional function. |
| 16 | PF1-OSC_OUT | bidirectional | 5 V-tolerant I/O (FT) with OSC_EN, EVENTOUT and TIM15_CH1N as functions, and the high-speed oscillator output OSC_OUT as additional function. |
| 17 | NRST | input | Active-low reset pin (RST structure) with an embedded weak pull-up resistor. |
| 18 | PF3 | bidirectional | 5 V-tolerant I/O (FT) with USART6_RTS_DE_CK as alternate function. |
| 19 | PF4 | bidirectional | 5 V-tolerant I/O (FT) with no alternate functions listed in the pin table. |
| 20 | PF5 | bidirectional | 5 V-tolerant I/O (FT) with no alternate functions listed in the pin table. |
| 21 | PC0 | bidirectional | 5 V-tolerant I/O with analog switch function (FT_a); alternate functions include USART6_TX and I2C3_SCL. |
| 22 | PC1 | bidirectional | 5 V-tolerant I/O with analog switch function (FT_a); alternate functions include TIM15_CH1, USART6_RX and I2C3_SDA. |
| 23 | PC2 | bidirectional | 5 V-tolerant I/O (FT); alternate functions include SPI2_MISO/I2S2_MCK and TIM15_CH2. |
| 24 | PC3 | bidirectional | 5 V-tolerant I/O (FT); alternate function SPI2_MOSI/I2S2_SD. |
| 25 | PA0 | bidirectional | 5 V-tolerant I/O with analog switch function (FT_a); alternate functions include SPI2_SCK/I2S2_CK, USART2_CTS and USART4_TX, with ADC_IN0, TAMP_IN2 and WKUP1 as additional functions. |
| 26 | PA1 | bidirectional | 5 V-tolerant I/O with analog switch and switchable diode to VDDIO1 (FT_ea); alternate functions include SPI1_SCK/I2S1_CK, USART2_RTS_DE_CK, USART4_RX, TIM15_CH1N, I2C1_SMBA and EVENTOUT, with ADC_IN1 additional. |
| 27 | PA2 | bidirectional | 5 V-tolerant I/O with analog switch function (FT_a); alternate functions include SPI1_MOSI/I2S1_SD, USART2_TX and TIM15_CH1, with ADC_IN2, WKUP4 and LSCO additional. |
| 28 | PA3 | bidirectional | 5 V-tolerant I/O with switchable diode to VDDIO1 and analog switch function (FT_ea); alternate functions include SPI2_MISO/I2S2_MCK, USART2_RX, TIM15_CH2 and EVENTOUT, with ADC_IN3 additional. |
| 29 | PA4 | bidirectional | 3.6 V-tolerant I/O with analog switch function (TT_a); alternate functions include SPI1_NSS/I2S1_WS, SPI2_MOSI/I2S2_SD, USB_NOE, USART6_TX, TIM14_CH1, EVENTOUT and SPI3_NSS, with ADC_IN4 and RTC_OUT2 additional. |
| 30 | PA5 | bidirectional | 3.6 V-tolerant I/O with switchable diode and analog switch (TT_ea); alternate functions include SPI1_SCK/I2S1_CK, USART6_RX, USART3_TX and EVENTOUT, with ADC_IN5 additional. |
| 31 | PA6 | bidirectional | 5 V-tolerant I/O with switchable diode and analog switch (FT_ea); alternate functions include SPI1_MISO/I2S1_MCK, TIM3_CH1, TIM1_BKIN, USART6_CTS, USART3_CTS, TIM16_CH1, I2C2_SDA and I2C3_SDA, with ADC_IN6 additional. |
| 32 | PA7 | bidirectional | 5 V-tolerant I/O with analog switch function (FT_a); alternate functions include SPI1_MOSI/I2S1_SD, TIM3_CH2, TIM1_CH1N, USART6_RTS_DE_CK, TIM14_CH1, TIM17_CH1, I2C2_SCL and I2C3_SCL, with ADC_IN7 additional. |
| 33 | PC4 | bidirectional | 5 V-tolerant I/O with analog switch function (FT_a); alternate functions include USART3_TX and USART1_TX, with ADC_IN17 additional. |
| 34 | PC5 | bidirectional | 5 V-tolerant I/O with analog switch function (FT_a); alternate functions include USART3_RX and USART1_RX, with ADC_IN18 and WKUP5 additional. |
| 35 | PB0 | bidirectional | 3.6 V-tolerant I/O with switchable diode and analog switch (TT/FT_ea per table); alternate functions include SPI1_NSS/I2S1_WS, TIM3_CH3, TIM1_CH2N, USART3_RX and USART5_TX, with ADC_IN8 additional. |
| 36 | PB1 | bidirectional | 5 V-tolerant I/O with switchable diode and analog switch (FT_ea); alternate functions include TIM14_CH1, TIM3_CH4, TIM1_CH3N, USART3_RTS_DE_CK and USART5_RX, with ADC_IN9 additional. |
| 37 | PB2 | bidirectional | 5 V-tolerant I/O with switchable diode and analog switch (FT_ea); alternate functions include SPI2_MISO/I2S2_MCK, MCO2, USART3_TX and EVENTOUT, with ADC_IN10 additional. |
| 38 | PF6 | bidirectional | 5 V-tolerant I/O (FT) with no alternate functions listed in the pin table. |
| 39 | PF7 | bidirectional | 5 V-tolerant I/O (FT); alternate function USART5_CTS. |
| 40 | PE7 | bidirectional | 5 V-tolerant I/O with analog switch function (FT_a); alternate functions include TIM1_ETR and USART5_RTS_DE_CK. |
| 41 | PE8 | bidirectional | 5 V-tolerant I/O with analog switch function (FT_a); alternate functions include USART4_TX and TIM1_CH1N. |
| 42 | PE9 | bidirectional | 5 V-tolerant I/O (FT); alternate functions include USART4_RX and TIM1_CH1. |
| 43 | PE10 | bidirectional | 5 V-tolerant I/O (FT); alternate functions include TIM1_CH2N and USART5_TX. |
| 44 | PE11 | bidirectional | 5 V-tolerant I/O (FT); alternate functions include TIM1_CH2 and USART5_RX. |
| 45 | PE12 | bidirectional | 5 V-tolerant I/O (FT); alternate functions include SPI1_NSS/I2S1_WS and TIM1_CH3N. |
| 46 | PE13 | bidirectional | 5 V-tolerant I/O (FT); alternate functions include SPI1_SCK/I2S1_CK and TIM1_CH3. |
| 47 | PE14 | bidirectional | 5 V-tolerant I/O (FT); alternate functions include SPI1_MISO/I2S1_MCK, TIM1_CH4 and TIM1_BKIN2. |
| 48 | PE15 | bidirectional | 5 V-tolerant I/O (FT); alternate functions include SPI1_MOSI/I2S1_SD and TIM1_BKIN. |
| 49 | PB10 | bidirectional | 5 V-tolerant Fm+-capable I/O with analog switch (FT_fa); alternate functions include USART3_TX, SPI2_SCK/I2S2_CK and I2C2_SCL, with ADC_IN11 additional. |
| 50 | PB11 | bidirectional | 5 V-tolerant Fm+-capable I/O with analog switch (FT_fa); alternate functions include SPI2_MOSI/I2S2_SD, USART3_RX and I2C2_SDA, with ADC_IN15 additional. |
| 51 | PB12 | bidirectional | 5 V-tolerant Fm+-capable I/O with analog switch (FT_fa); alternate functions include SPI2_NSS/I2S2_WS, TIM1_BKIN, TIM15_BKIN, EVENTOUT and I2C2_SMBA, with ADC_IN16 additional. |
| 52 | PB13 | bidirectional | 5 V-tolerant Fm+-capable I/O (FT_f); alternate functions include SPI2_SCK/I2S2_CK, TIM1_CH1N, USART3_CTS, TIM15_CH1N, I2C2_SCL and EVENTOUT. |
| 53 | PB14 | bidirectional | 5 V-tolerant Fm+-capable I/O (FT_f); alternate functions include SPI2_MISO/I2S2_MCK, TIM1_CH2N, USART3_RTS_DE_CK, TIM15_CH1, I2C2_SDA, EVENTOUT and USART6_RTS_DE_CK. |
| 54 | PB15 | bidirectional | 5 V-tolerant Fm+-capable I/O with specific electrical characteristics (FT_fc); alternate functions include SPI2_MOSI/I2S2_SD, TIM1_CH3N, TIM15_CH1N, TIM15_CH2, EVENTOUT and USART6_CTS, and it may carry an upon-reset pull-down depending on PD1 level. |
| 55 | PA8 | bidirectional | 5 V-tolerant Fm+-capable I/O with specific electrical characteristics (FT_fc); alternate functions include MCO, SPI2_NSS/I2S2_WS, TIM1_CH1, EVENTOUT and I2C2_SMBA, and it may carry an upon-reset pull-down depending on PA9 level. |
| 56 | PA9 | bidirectional | 5 V-tolerant Fm+-capable I/O with specific electrical characteristics (FT_fd); alternate functions include MCO, USART1_TX, TIM1_CH2, SPI2_MISO/I2S2_MCK, TIM15_BKIN, I2C1_SCL, EVENTOUT and I2C2_SCL, and can be remapped in place of PA11 using SYSCFG_CFGR1. |
| 57 | PC6 | bidirectional | 5 V-tolerant I/O (FT); alternate function TIM3_CH1. |
| 58 | PC7 | bidirectional | 5 V-tolerant I/O (FT); alternate function TIM3_CH2. |
| 59 | PD8 | bidirectional | 5 V-tolerant I/O (FT); alternate functions include USART3_TX and SPI1_SCK/I2S1_CK. |
| 60 | PD9 | bidirectional | 5 V-tolerant I/O (FT); alternate functions include USART3_RX, SPI1_NSS/I2S1_WS and TIM1_BKIN2. |
| 61 | PD10 | bidirectional | 5 V-tolerant I/O (FT); alternate function MCO. |
| 62 | PD11 | bidirectional | 5 V-tolerant I/O (FT); alternate function USART3_CTS. |
| 63 | VSS | power_in | Ground pin; all voltages are referenced to VSS. |
| 64 | VDD | power_in | Digital supply pin for the 2.0 V to 3.6 V operating voltage range, to be decoupled with ceramic capacitors close to the pin. |
| 65 | PD12 | bidirectional | 5 V-tolerant I/O (FT); alternate functions include USART3_RTS_DE_CK and TIM4_CH1. |
| 66 | PD13 | bidirectional | 5 V-tolerant I/O (FT); alternate function TIM4_CH2. |
| 67 | PD14 | bidirectional | 5 V-tolerant I/O (FT); alternate function TIM4_CH3. |
| 68 | PD15 | bidirectional | 5 V-tolerant I/O (FT); alternate function TIM4_CH4. |
| 69 | PA10 | bidirectional | 5 V-tolerant Fm+-capable I/O with specific electrical characteristics (FT_fd); alternate functions include SPI2_MOSI/I2S2_SD, USART1_RX, TIM1_CH3, MCO2, TIM17_BKIN, I2C1_SDA, EVENTOUT and I2C2_SDA, and it can be remapped in place of PA12 using SYSCFG_CFGR1. |
| 70 | PA11 [PA9] | bidirectional | 5 V-tolerant I/O with USB function (FT_fu); alternate functions include SPI1_MISO/I2S1_MCK, USART1_CTS, TIM1_CH4, TIM1_BKIN2 and I2C2_SCL, with USB_DM as additional function. |
| 71 | PA12 [PA10] | bidirectional | 5 V-tolerant I/O with USB function (FT_fu); alternate functions include SPI1_MOSI/I2S1_SD, USART1_RTS_DE_CK, TIM1_ETR, I2S_CKIN and I2C2_SDA, with USB_DP as additional function. |
| 72 | PF8 | bidirectional | 5 V-tolerant I/O (FT) with no alternate functions listed in the pin table. |
| 73 | PA13 | bidirectional | 5 V-tolerant I/O with switchable diode to VDDIO1 (FT_e); upon reset it is the SWDIO debug function with internal pull-up enabled, and it also carries IR_OUT, USB_NOE and EVENTOUT. |
| 74 | PA14-BOOT0 | bidirectional | 5 V-tolerant I/O (FT) that is the SWCLK debug function with internal pull-down enabled upon reset, and also BOOT0 and USART2_TX/EVENTOUT as functions. |
| 75 | PA15 | bidirectional | 5 V-tolerant I/O (FT); alternate functions include SPI1_NSS/I2S1_WS, USART2_RX, MCO2, USART4_RTS_DE_CK, USART3_RTS_DE_CK, USB_NOE, EVENTOUT, I2C2_SMBA and SPI3_NSS. |
| 76 | PC8 | bidirectional | 5 V-tolerant I/O (FT); alternate functions include TIM3_CH3 and TIM1_CH1. |
| 77 | PC9 | bidirectional | 5 V-tolerant I/O (FT); alternate functions include I2S_CKIN, TIM3_CH4, TIM1_CH2 and USB_NOE. |
| 78 | PD0 | bidirectional | 5 V-tolerant I/O with specific electrical characteristics (FT_c); alternate functions include EVENTOUT, SPI2_NSS/I2S2_WS and TIM16_CH1, and it may carry an upon-reset pull-down depending on PD1 level. |
| 79 | PD1 | bidirectional | 5 V-tolerant I/O with specific electrical characteristics (FT_d); alternate functions include EVENTOUT, SPI2_SCK/I2S2_CK and TIM17_CH1. |
| 80 | PD2 | bidirectional | 5 V-tolerant I/O with specific electrical characteristics (FT_c); alternate functions include USART3_RTS_DE_CK, TIM3_ETR, TIM1_CH1N and USART5_RX, and it may carry an upon-reset pull-down depending on PD3 level. |
| 81 | PD3 | bidirectional | 5 V-tolerant I/O with specific electrical characteristics (FT_d); alternate functions include USART2_CTS, SPI2_MISO/I2S2_MCK, TIM1_CH2N and USART5_TX. |
| 82 | PD4 | bidirectional | 5 V-tolerant I/O (FT); alternate functions include USART2_RTS_DE_CK, SPI2_MOSI/I2S2_SD, TIM1_CH3N and USART5_RTS_DE_CK. |
| 83 | PD5 | bidirectional | 5 V-tolerant I/O (FT); alternate functions include USART2_TX, SPI1_MISO/I2S1_MCK, TIM1_BKIN and USART5_CTS. |
| 84 | PD6 | bidirectional | 5 V-tolerant I/O (FT); alternate functions include USART2_RX and SPI1_MOSI/I2S1_SD. |
| 85 | PD7 | bidirectional | 5 V-tolerant I/O (FT); alternate function MCO2. |
| 86 | PF9 | bidirectional | 5 V-tolerant I/O (FT); alternate function USART6_TX. |
| 87 | PF10 | bidirectional | 5 V-tolerant I/O (FT); alternate function USART6_RX. |
| 88 | PF11 | bidirectional | 5 V-tolerant I/O (FT); alternate function USART6_RTS_DE_CK. |
| 89 | PF12 | bidirectional | 5 V-tolerant I/O (FT); alternate functions include TIM15_CH1 and USART6_CTS. |
| 90 | PF13 | bidirectional | 5 V-tolerant I/O (FT); alternate function TIM15_CH2. |
| 91 | PB3 | bidirectional | 5 V-tolerant I/O with analog switch function (FT_a); alternate functions include SPI1_SCK/I2S1_CK, TIM1_CH2, USART5_TX, USART1_RTS_DE_CK, I2C3_SCL, EVENTOUT, I2C2_SCL and SPI3_SCK. |
| 92 | PB4 | bidirectional | 5 V-tolerant I/O with analog switch function (FT_a); alternate functions include SPI1_MISO/I2S1_MCK, TIM3_CH1, USART5_RX, USART1_CTS, TIM17_BKIN, I2C3_SDA, EVENTOUT, I2C2_SDA and SPI3_MISO. |
| 93 | PB5 | bidirectional | 5 V-tolerant I/O (FT); alternate functions include SPI1_MOSI/I2S1_SD, TIM3_CH2, TIM16_BKIN, I2C1_SMBA, USART5_RTS_DE_CK and SPI3_MOSI, with WKUP6 additional. |
| 94 | PE0 | bidirectional | 5 V-tolerant I/O (FT); alternate functions include TIM16_CH1, EVENTOUT and TIM4_ETR. |
| 95 | PE1 | bidirectional | 5 V-tolerant I/O (FT); alternate functions include TIM17_CH1 and EVENTOUT. |
| 96 | PE2 | bidirectional | 5 V-tolerant I/O (FT); alternate function TIM3_ETR. |
| 97 | PE3 | bidirectional | 5 V-tolerant I/O (FT); alternate function TIM3_CH1. |
| 98 | PB6 | bidirectional | 5 V-tolerant Fm+-capable I/O with analog switch (FT_fa); alternate functions include USART1_TX, TIM1_CH3, TIM16_CH1N, SPI2_MISO/I2S2_MCK, I2C1_SCL, EVENTOUT, USART5_CTS and TIM4_CH1. |
| 99 | PB7 | bidirectional | 5 V-tolerant Fm+-capable I/O with analog switch (FT_fa); alternate functions include USART1_RX, SPI2_MOSI/I2S2_SD, TIM17_CH1N, USART4_CTS, I2C1_SDA, EVENTOUT and TIM4_CH2. |
| 100 | PB8 | bidirectional | 5 V-tolerant Fm+-capable I/O (FT_f); alternate functions include SPI2_SCK/I2S2_CK, TIM16_CH1, USART3_TX, TIM15_BKIN, I2C1_SCL, EVENTOUT, USART6_TX and TIM4_CH3. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LQFP-100(14x14) |
| Category | Embedded Processors & Controllers |
| Pins | 100 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage VDD (external, absolute maximum) | VDD | -0.3 | 4 | V | 48 | ||
| External supply voltage on VBAT pin (absolute maximum) | VBAT | -0.3 | 4 | V | 48 | ||
| External voltage on VREF+ pin (absolute maximum) | VREF+ | -0.3 | V | Max printed as Min(VDD + 0.4, 4.0) | 48 | ||
| Input voltage on FT_xx pins except FT_c (absolute maximum) | VIN | -0.3 | V | Max printed as VDD + 4.0; internal pull-up/pull-down disabled above 4 V | 48 | ||
| Input voltage on FT_c pins (absolute maximum) | VIN | -0.3 | 5.5 | V | 48 | ||
| Input voltage on any other pin (absolute maximum) | VIN | -0.3 | 4 | V | 48 | ||
| Current into VDD/VDDA and VDD power pins (source) | IVDD/VDDA,VDD | 100 | mA | 48 | |||
| Current out of VSS/VSSA and VSS ground pins (sink) | IVSS/VSSA,VSS | 100 | mA | 48 | |||
| Output current sunk by any I/O and control pin except FT_f | IIO(PIN) | 15 | mA | 48 | |||
| Output current sunk by any FT_f pin | IIO(PIN) | 20 | mA | 48 | |||
| Output current sourced by any I/O and control pin | IIO(PIN) | 15 | mA | 48 | |||
| Total output current sunk by sum of all I/Os and control pins | ΣIIO(PIN) | 80 | mA | 49 | |||
| Total output current sourced by sum of all I/Os and control pins | ΣIIO(PIN) | 80 | mA | 49 | |||
| Injected current on a FT_xx pin | IINJ(PIN) | -5 | mA | Positive injection not possible (NA) | 49 | ||
| Injected current on a TT_a pin | IINJ(PIN) | -5 | 0 | mA | 49 | ||
| Total injected current (sum of all I/Os and control pins) | ΣIINJ(PIN) | 25 | mA | 49 | |||
| Storage temperature range | TSTG | -65 | 150 | °C | 49 | ||
| Maximum junction temperature | TJ | 150 | °C | 49 | |||
| Internal AHB clock frequency | fHCLK | 0 | 64 | MHz | 49 | ||
| Internal APB clock frequency | fPCLK | 0 | 64 | MHz | 49 | ||
| Supply voltage | VDD/DDA | 2 | 3.6 | V | Reset released functionality guaranteed down to VPDR min | 49 | |
| Backup operating voltage | VBAT | 1.55 | 3.6 | V | 49 | ||
| I/O input voltage (all except RST, TT_xx and FT_c) | VIN | -0.3 | V | Max printed as Min(VDD + 3.6, 5.5) | 49 | ||
| I/O input voltage (FT_c) | VIN | -0.3 | 5 | V | 49 | ||
| Ambient temperature | TA | -40 | 85 | °C | 49 | ||
| Junction temperature | TJ | -40 | 105 | °C | 49 | ||
| VDD slew rate (falling) | tVDD | 10 | µs/V | VDD falling; rising max printed as infinity, not included | 50 | ||
| POR temporization when VDD crosses VPOR | tRSTTEMPO | 250 | 400 | µs | VDD rising | 50 | |
| Power-on reset threshold | VPOR | 2.06 | 2.1 | 2.14 | V | 50 | |
| Power-down reset threshold | VPDR | 1.96 | 2 | 2.04 | V | 50 | |
| Internal reference voltage | VREFINT | 1.182 | 1.212 | 1.232 | V | -40°C < TJ < 105°C | 50 |
| ADC sampling time when reading the internal reference voltage | tS_vrefint | 4 | µs | Specified by design | 50 | ||
| Start time of reference voltage buffer when ADC is enabled | tstart_vrefint | 8 | 12 | µs | 50 | ||
| VREFINT buffer consumption from VDD when converted by ADC | IDD(VREFINTBUF) | 12.5 | 20 | µA | 51 | ||
| Internal reference voltage spread over the temperature range | ΔVREFINT | 5 | 7.5 | mV | VDD = 3 V | 51 | |
| Temperature coefficient | TCoeff_vrefint | 30 | 50 | ppm/°C | 51 | ||
| Long term stability | ACoeff | 300 | 1000 | ppm | 1000 hours, T = 25 °C | 51 | |
| Voltage coefficient | VDDCoeff | 250 | 1200 | ppm/V | 3.0 V < VDD < 3.6 V | 51 | |
| Supply current in Run mode, Range 1, 64 MHz, flash fetch | IDD(Run) | 9.4 | 10 | mA | Range 1, PLL enabled, fHCLK 64 MHz, flash, max at 85 °C, VDD 3.6 V | 52 | |
| Supply current in Run mode, Range 2, 16 MHz, flash fetch | IDD(Run) | 2 | 2.5 | mA | Range 2, PLL enabled, fHCLK 16 MHz, flash, max at 85 °C, VDD 3.6 V | 52 | |
| Supply current in Low-power run mode, 2 MHz, flash fetch | IDD(LPRun) | 308 | 930 | µA | PLL disabled, fHCLK 2 MHz, flash, max at 85 °C, VDD 3.6 V | 53 | |
| Supply current in Sleep mode, Range 1, 64 MHz | IDD(Sleep) | 9.4 | 10 | mA | Range 1, flash enabled, all peripherals disabled, max at 85 °C, VDD 3.6 V | 53 | |
| Supply current in Low-power sleep mode, 2 MHz | IDD(LPSleep) | 76 | 550 | µA | Flash disabled, PLL disabled, max at 85 °C, VDD 3.6 V | 53 | |
| Supply current in Stop 0 mode, HSI kernel ON, VDD 3.6 V | IDD(Stop 0) | 330 | 523 | µA | HSI kernel ON, max at 85 °C, VDD 3.6 V | 54 | |
| Supply current in Stop 1 mode, flash not powered, RTC disabled, VDD 3.6 V | IDD(Stop 1) | 3.9 | 110 | µA | Flash memory not powered, RTC disabled, max at 85 °C, VDD 3.6 V | 54 | |
| Supply current in Standby mode, RTC disabled, VDD 3.6 V | IDD(Standby) | 1.4 | 23 | µA | RTC disabled, max at 85 °C, VDD 3.6 V | 54 | |
| Wakeup time from Standby mode | tWUSTBY | 14.5 | 30 | µs | Transiting to Run mode; HCLK = HSI16 = 16 MHz; Regulator in Range 1 | 58 | |
| Transition times between regulator Range 1 and Range 2 | tVOST | 20 | 40 | µs | HSISYS = HSI16 | 59 | |
| User external clock source frequency (Range 1) | fHSE_ext | 8 | 48 | MHz | Voltage scaling Range 1 | 59 | |
| Oscillator frequency (HSE crystal) | fOSC_IN | 4 | 8 | 48 | MHz | 60 | |
| HSE current consumption during startup | IDD(HSE) | 5.5 | mA | During startup | 60 | ||
| User external clock source frequency (LSE) | fLSE_ext | 32.768 | 1000 | kHz | 59 | ||
| HSI16 frequency | fHSI16 | 15.88 | 16.08 | MHz | VDD = 3.0 V, TA = 30 °C | 63 | |
| HSI16 oscillator frequency drift over temperature | ΔTemp(HSI16) | -2 | 1.5 | % | TA = -40 to 85 °C | 63 | |
| LSI frequency over VDD and temperature | fLSI | 29.5 | 34 | kHz | VDD = VDD(min) to 3.6 V, TA = -40 to 85 °C | 64 | |
| PLL input clock frequency | fPLL_IN | 2.66 | 16 | MHz | 64 | ||
| PLL power consumption on VDD (VCO 96 MHz) | IDD(PLL) | 200 | 260 | µA | VCO freq = 96 MHz | 65 | |
| Endurance | NEND | 1 | kcycles | TA = -40 to +85 °C | 65 | ||
| ADC analog supply voltage | VDDA | 2 | 3.6 | V | 76 |
CAD (KiCad official)
- Symbol:
STM32G0B0VET6 - Footprint:
Package_QFP:LQFP-100_14x14mm_P0.5mm - 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)
- 3D model files:
stm32g0b0vet6-etched.step/stm32g0b0vet6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32g0b0vet6.step/stm32g0b0vet6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (111 pp, sha256
c29d182a97aa5012, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).