Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

STM32G0B0VET6

STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · LQFP-100(14x14)

STM32G0B0VET6 from STMicroelectronics, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PB9 bidirectional 5 V-tolerant Fm+-capable I/O (FT_f); alternate functions include IR_OUT, TIM17_CH1, USART3_RX, SPI2_NSS/I2S2_WS, I2C1_SDA, USART6_RX and TIM4_CH4.
2 PC10 bidirectional 5 V-tolerant I/O (FT); alternate functions include USART3_TX, USART4_TX, TIM1_CH3 and SPI3_SCK.
3 PC11 bidirectional 5 V-tolerant I/O (FT); alternate functions include USART3_RX, USART4_RX, TIM1_CH4 and SPI3_MISO.
4 PE4 bidirectional 5 V-tolerant I/O (FT) with TIM3_CH2 as its listed alternate function.
5 PE5 bidirectional 5 V-tolerant I/O (FT) with TIM3_CH3 as its listed alternate function.
6 PE6 bidirectional 5 V-tolerant I/O (FT) with TIM3_CH4 as alternate function and TAMP_IN3 and WKUP3 as additional functions.
7 PC12 bidirectional 5 V-tolerant I/O (FT); alternate functions include TIM14_CH1, USART5_TX and SPI3_MOSI.
8 PC13 bidirectional 5 V-tolerant I/O (FT) supplied through the power switch, limited to 3 mA, so output speed must not exceed 2 MHz at 30 pF maximum load and it can only be used as a current sink; alternate function TIM1_BKIN, additional functions TAMP_IN1, RTC_TS, RTC_OUT1 and WKUP2.
9 PC14-OSC32_IN bidirectional 5 V-tolerant I/O (FT) supplied through the power switch with the same 3 mA limit as PC13, sharing its output-speed and current-sink restrictions; it is also the 32 kHz oscillator input OSC32_IN.
10 PC15-OSC32_OUT bidirectional 5 V-tolerant I/O (FT) supplied through the power switch with the same 3 mA limit as PC13, sharing its output-speed and current-sink restrictions; it is also the 32 kHz oscillator output OSC32_OUT.
11 VBAT power_in Battery backup supply input that keeps the RTC and backup registers powered (VBAT supply feature).
12 VREF+ power_in Positive ADC reference voltage input, whose range is 2 V to VDDA and which is internally connected to VDDA on some packages.
13 VDD/VDDA power_in Digital and analog supply pin for the 2.0 V to 3.6 V operating voltage range.
14 VSS/VSSA power_in Ground pin for digital and analog circuits; all voltages are referenced to VSS.
15 PF0-OSC_IN bidirectional 5 V-tolerant I/O (FT) with TIM14_CH1 and EVENTOUT as alternate functions, and the high-speed oscillator input OSC_IN as additional function.
16 PF1-OSC_OUT bidirectional 5 V-tolerant I/O (FT) with OSC_EN, EVENTOUT and TIM15_CH1N as functions, and the high-speed oscillator output OSC_OUT as additional function.
17 NRST input Active-low reset pin (RST structure) with an embedded weak pull-up resistor.
18 PF3 bidirectional 5 V-tolerant I/O (FT) with USART6_RTS_DE_CK as alternate function.
19 PF4 bidirectional 5 V-tolerant I/O (FT) with no alternate functions listed in the pin table.
20 PF5 bidirectional 5 V-tolerant I/O (FT) with no alternate functions listed in the pin table.
21 PC0 bidirectional 5 V-tolerant I/O with analog switch function (FT_a); alternate functions include USART6_TX and I2C3_SCL.
22 PC1 bidirectional 5 V-tolerant I/O with analog switch function (FT_a); alternate functions include TIM15_CH1, USART6_RX and I2C3_SDA.
23 PC2 bidirectional 5 V-tolerant I/O (FT); alternate functions include SPI2_MISO/I2S2_MCK and TIM15_CH2.
24 PC3 bidirectional 5 V-tolerant I/O (FT); alternate function SPI2_MOSI/I2S2_SD.
25 PA0 bidirectional 5 V-tolerant I/O with analog switch function (FT_a); alternate functions include SPI2_SCK/I2S2_CK, USART2_CTS and USART4_TX, with ADC_IN0, TAMP_IN2 and WKUP1 as additional functions.
26 PA1 bidirectional 5 V-tolerant I/O with analog switch and switchable diode to VDDIO1 (FT_ea); alternate functions include SPI1_SCK/I2S1_CK, USART2_RTS_DE_CK, USART4_RX, TIM15_CH1N, I2C1_SMBA and EVENTOUT, with ADC_IN1 additional.
27 PA2 bidirectional 5 V-tolerant I/O with analog switch function (FT_a); alternate functions include SPI1_MOSI/I2S1_SD, USART2_TX and TIM15_CH1, with ADC_IN2, WKUP4 and LSCO additional.
28 PA3 bidirectional 5 V-tolerant I/O with switchable diode to VDDIO1 and analog switch function (FT_ea); alternate functions include SPI2_MISO/I2S2_MCK, USART2_RX, TIM15_CH2 and EVENTOUT, with ADC_IN3 additional.
29 PA4 bidirectional 3.6 V-tolerant I/O with analog switch function (TT_a); alternate functions include SPI1_NSS/I2S1_WS, SPI2_MOSI/I2S2_SD, USB_NOE, USART6_TX, TIM14_CH1, EVENTOUT and SPI3_NSS, with ADC_IN4 and RTC_OUT2 additional.
30 PA5 bidirectional 3.6 V-tolerant I/O with switchable diode and analog switch (TT_ea); alternate functions include SPI1_SCK/I2S1_CK, USART6_RX, USART3_TX and EVENTOUT, with ADC_IN5 additional.
31 PA6 bidirectional 5 V-tolerant I/O with switchable diode and analog switch (FT_ea); alternate functions include SPI1_MISO/I2S1_MCK, TIM3_CH1, TIM1_BKIN, USART6_CTS, USART3_CTS, TIM16_CH1, I2C2_SDA and I2C3_SDA, with ADC_IN6 additional.
32 PA7 bidirectional 5 V-tolerant I/O with analog switch function (FT_a); alternate functions include SPI1_MOSI/I2S1_SD, TIM3_CH2, TIM1_CH1N, USART6_RTS_DE_CK, TIM14_CH1, TIM17_CH1, I2C2_SCL and I2C3_SCL, with ADC_IN7 additional.
33 PC4 bidirectional 5 V-tolerant I/O with analog switch function (FT_a); alternate functions include USART3_TX and USART1_TX, with ADC_IN17 additional.
34 PC5 bidirectional 5 V-tolerant I/O with analog switch function (FT_a); alternate functions include USART3_RX and USART1_RX, with ADC_IN18 and WKUP5 additional.
35 PB0 bidirectional 3.6 V-tolerant I/O with switchable diode and analog switch (TT/FT_ea per table); alternate functions include SPI1_NSS/I2S1_WS, TIM3_CH3, TIM1_CH2N, USART3_RX and USART5_TX, with ADC_IN8 additional.
36 PB1 bidirectional 5 V-tolerant I/O with switchable diode and analog switch (FT_ea); alternate functions include TIM14_CH1, TIM3_CH4, TIM1_CH3N, USART3_RTS_DE_CK and USART5_RX, with ADC_IN9 additional.
37 PB2 bidirectional 5 V-tolerant I/O with switchable diode and analog switch (FT_ea); alternate functions include SPI2_MISO/I2S2_MCK, MCO2, USART3_TX and EVENTOUT, with ADC_IN10 additional.
38 PF6 bidirectional 5 V-tolerant I/O (FT) with no alternate functions listed in the pin table.
39 PF7 bidirectional 5 V-tolerant I/O (FT); alternate function USART5_CTS.
40 PE7 bidirectional 5 V-tolerant I/O with analog switch function (FT_a); alternate functions include TIM1_ETR and USART5_RTS_DE_CK.
41 PE8 bidirectional 5 V-tolerant I/O with analog switch function (FT_a); alternate functions include USART4_TX and TIM1_CH1N.
42 PE9 bidirectional 5 V-tolerant I/O (FT); alternate functions include USART4_RX and TIM1_CH1.
43 PE10 bidirectional 5 V-tolerant I/O (FT); alternate functions include TIM1_CH2N and USART5_TX.
44 PE11 bidirectional 5 V-tolerant I/O (FT); alternate functions include TIM1_CH2 and USART5_RX.
45 PE12 bidirectional 5 V-tolerant I/O (FT); alternate functions include SPI1_NSS/I2S1_WS and TIM1_CH3N.
46 PE13 bidirectional 5 V-tolerant I/O (FT); alternate functions include SPI1_SCK/I2S1_CK and TIM1_CH3.
47 PE14 bidirectional 5 V-tolerant I/O (FT); alternate functions include SPI1_MISO/I2S1_MCK, TIM1_CH4 and TIM1_BKIN2.
48 PE15 bidirectional 5 V-tolerant I/O (FT); alternate functions include SPI1_MOSI/I2S1_SD and TIM1_BKIN.
49 PB10 bidirectional 5 V-tolerant Fm+-capable I/O with analog switch (FT_fa); alternate functions include USART3_TX, SPI2_SCK/I2S2_CK and I2C2_SCL, with ADC_IN11 additional.
50 PB11 bidirectional 5 V-tolerant Fm+-capable I/O with analog switch (FT_fa); alternate functions include SPI2_MOSI/I2S2_SD, USART3_RX and I2C2_SDA, with ADC_IN15 additional.
51 PB12 bidirectional 5 V-tolerant Fm+-capable I/O with analog switch (FT_fa); alternate functions include SPI2_NSS/I2S2_WS, TIM1_BKIN, TIM15_BKIN, EVENTOUT and I2C2_SMBA, with ADC_IN16 additional.
52 PB13 bidirectional 5 V-tolerant Fm+-capable I/O (FT_f); alternate functions include SPI2_SCK/I2S2_CK, TIM1_CH1N, USART3_CTS, TIM15_CH1N, I2C2_SCL and EVENTOUT.
53 PB14 bidirectional 5 V-tolerant Fm+-capable I/O (FT_f); alternate functions include SPI2_MISO/I2S2_MCK, TIM1_CH2N, USART3_RTS_DE_CK, TIM15_CH1, I2C2_SDA, EVENTOUT and USART6_RTS_DE_CK.
54 PB15 bidirectional 5 V-tolerant Fm+-capable I/O with specific electrical characteristics (FT_fc); alternate functions include SPI2_MOSI/I2S2_SD, TIM1_CH3N, TIM15_CH1N, TIM15_CH2, EVENTOUT and USART6_CTS, and it may carry an upon-reset pull-down depending on PD1 level.
55 PA8 bidirectional 5 V-tolerant Fm+-capable I/O with specific electrical characteristics (FT_fc); alternate functions include MCO, SPI2_NSS/I2S2_WS, TIM1_CH1, EVENTOUT and I2C2_SMBA, and it may carry an upon-reset pull-down depending on PA9 level.
56 PA9 bidirectional 5 V-tolerant Fm+-capable I/O with specific electrical characteristics (FT_fd); alternate functions include MCO, USART1_TX, TIM1_CH2, SPI2_MISO/I2S2_MCK, TIM15_BKIN, I2C1_SCL, EVENTOUT and I2C2_SCL, and can be remapped in place of PA11 using SYSCFG_CFGR1.
57 PC6 bidirectional 5 V-tolerant I/O (FT); alternate function TIM3_CH1.
58 PC7 bidirectional 5 V-tolerant I/O (FT); alternate function TIM3_CH2.
59 PD8 bidirectional 5 V-tolerant I/O (FT); alternate functions include USART3_TX and SPI1_SCK/I2S1_CK.
60 PD9 bidirectional 5 V-tolerant I/O (FT); alternate functions include USART3_RX, SPI1_NSS/I2S1_WS and TIM1_BKIN2.
61 PD10 bidirectional 5 V-tolerant I/O (FT); alternate function MCO.
62 PD11 bidirectional 5 V-tolerant I/O (FT); alternate function USART3_CTS.
63 VSS power_in Ground pin; all voltages are referenced to VSS.
64 VDD power_in Digital supply pin for the 2.0 V to 3.6 V operating voltage range, to be decoupled with ceramic capacitors close to the pin.
65 PD12 bidirectional 5 V-tolerant I/O (FT); alternate functions include USART3_RTS_DE_CK and TIM4_CH1.
66 PD13 bidirectional 5 V-tolerant I/O (FT); alternate function TIM4_CH2.
67 PD14 bidirectional 5 V-tolerant I/O (FT); alternate function TIM4_CH3.
68 PD15 bidirectional 5 V-tolerant I/O (FT); alternate function TIM4_CH4.
69 PA10 bidirectional 5 V-tolerant Fm+-capable I/O with specific electrical characteristics (FT_fd); alternate functions include SPI2_MOSI/I2S2_SD, USART1_RX, TIM1_CH3, MCO2, TIM17_BKIN, I2C1_SDA, EVENTOUT and I2C2_SDA, and it can be remapped in place of PA12 using SYSCFG_CFGR1.
70 PA11 [PA9] bidirectional 5 V-tolerant I/O with USB function (FT_fu); alternate functions include SPI1_MISO/I2S1_MCK, USART1_CTS, TIM1_CH4, TIM1_BKIN2 and I2C2_SCL, with USB_DM as additional function.
71 PA12 [PA10] bidirectional 5 V-tolerant I/O with USB function (FT_fu); alternate functions include SPI1_MOSI/I2S1_SD, USART1_RTS_DE_CK, TIM1_ETR, I2S_CKIN and I2C2_SDA, with USB_DP as additional function.
72 PF8 bidirectional 5 V-tolerant I/O (FT) with no alternate functions listed in the pin table.
73 PA13 bidirectional 5 V-tolerant I/O with switchable diode to VDDIO1 (FT_e); upon reset it is the SWDIO debug function with internal pull-up enabled, and it also carries IR_OUT, USB_NOE and EVENTOUT.
74 PA14-BOOT0 bidirectional 5 V-tolerant I/O (FT) that is the SWCLK debug function with internal pull-down enabled upon reset, and also BOOT0 and USART2_TX/EVENTOUT as functions.
75 PA15 bidirectional 5 V-tolerant I/O (FT); alternate functions include SPI1_NSS/I2S1_WS, USART2_RX, MCO2, USART4_RTS_DE_CK, USART3_RTS_DE_CK, USB_NOE, EVENTOUT, I2C2_SMBA and SPI3_NSS.
76 PC8 bidirectional 5 V-tolerant I/O (FT); alternate functions include TIM3_CH3 and TIM1_CH1.
77 PC9 bidirectional 5 V-tolerant I/O (FT); alternate functions include I2S_CKIN, TIM3_CH4, TIM1_CH2 and USB_NOE.
78 PD0 bidirectional 5 V-tolerant I/O with specific electrical characteristics (FT_c); alternate functions include EVENTOUT, SPI2_NSS/I2S2_WS and TIM16_CH1, and it may carry an upon-reset pull-down depending on PD1 level.
79 PD1 bidirectional 5 V-tolerant I/O with specific electrical characteristics (FT_d); alternate functions include EVENTOUT, SPI2_SCK/I2S2_CK and TIM17_CH1.
80 PD2 bidirectional 5 V-tolerant I/O with specific electrical characteristics (FT_c); alternate functions include USART3_RTS_DE_CK, TIM3_ETR, TIM1_CH1N and USART5_RX, and it may carry an upon-reset pull-down depending on PD3 level.
81 PD3 bidirectional 5 V-tolerant I/O with specific electrical characteristics (FT_d); alternate functions include USART2_CTS, SPI2_MISO/I2S2_MCK, TIM1_CH2N and USART5_TX.
82 PD4 bidirectional 5 V-tolerant I/O (FT); alternate functions include USART2_RTS_DE_CK, SPI2_MOSI/I2S2_SD, TIM1_CH3N and USART5_RTS_DE_CK.
83 PD5 bidirectional 5 V-tolerant I/O (FT); alternate functions include USART2_TX, SPI1_MISO/I2S1_MCK, TIM1_BKIN and USART5_CTS.
84 PD6 bidirectional 5 V-tolerant I/O (FT); alternate functions include USART2_RX and SPI1_MOSI/I2S1_SD.
85 PD7 bidirectional 5 V-tolerant I/O (FT); alternate function MCO2.
86 PF9 bidirectional 5 V-tolerant I/O (FT); alternate function USART6_TX.
87 PF10 bidirectional 5 V-tolerant I/O (FT); alternate function USART6_RX.
88 PF11 bidirectional 5 V-tolerant I/O (FT); alternate function USART6_RTS_DE_CK.
89 PF12 bidirectional 5 V-tolerant I/O (FT); alternate functions include TIM15_CH1 and USART6_CTS.
90 PF13 bidirectional 5 V-tolerant I/O (FT); alternate function TIM15_CH2.
91 PB3 bidirectional 5 V-tolerant I/O with analog switch function (FT_a); alternate functions include SPI1_SCK/I2S1_CK, TIM1_CH2, USART5_TX, USART1_RTS_DE_CK, I2C3_SCL, EVENTOUT, I2C2_SCL and SPI3_SCK.
92 PB4 bidirectional 5 V-tolerant I/O with analog switch function (FT_a); alternate functions include SPI1_MISO/I2S1_MCK, TIM3_CH1, USART5_RX, USART1_CTS, TIM17_BKIN, I2C3_SDA, EVENTOUT, I2C2_SDA and SPI3_MISO.
93 PB5 bidirectional 5 V-tolerant I/O (FT); alternate functions include SPI1_MOSI/I2S1_SD, TIM3_CH2, TIM16_BKIN, I2C1_SMBA, USART5_RTS_DE_CK and SPI3_MOSI, with WKUP6 additional.
94 PE0 bidirectional 5 V-tolerant I/O (FT); alternate functions include TIM16_CH1, EVENTOUT and TIM4_ETR.
95 PE1 bidirectional 5 V-tolerant I/O (FT); alternate functions include TIM17_CH1 and EVENTOUT.
96 PE2 bidirectional 5 V-tolerant I/O (FT); alternate function TIM3_ETR.
97 PE3 bidirectional 5 V-tolerant I/O (FT); alternate function TIM3_CH1.
98 PB6 bidirectional 5 V-tolerant Fm+-capable I/O with analog switch (FT_fa); alternate functions include USART1_TX, TIM1_CH3, TIM16_CH1N, SPI2_MISO/I2S2_MCK, I2C1_SCL, EVENTOUT, USART5_CTS and TIM4_CH1.
99 PB7 bidirectional 5 V-tolerant Fm+-capable I/O with analog switch (FT_fa); alternate functions include USART1_RX, SPI2_MOSI/I2S2_SD, TIM17_CH1N, USART4_CTS, I2C1_SDA, EVENTOUT and TIM4_CH2.
100 PB8 bidirectional 5 V-tolerant Fm+-capable I/O (FT_f); alternate functions include SPI2_SCK/I2S2_CK, TIM16_CH1, USART3_TX, TIM15_BKIN, I2C1_SCL, EVENTOUT, USART6_TX and TIM4_CH3.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package LQFP-100(14x14)
Category Embedded Processors & Controllers
Pins 100

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VDD (external, absolute maximum) VDD -0.3 4 V 48
External supply voltage on VBAT pin (absolute maximum) VBAT -0.3 4 V 48
External voltage on VREF+ pin (absolute maximum) VREF+ -0.3 V Max printed as Min(VDD + 0.4, 4.0) 48
Input voltage on FT_xx pins except FT_c (absolute maximum) VIN -0.3 V Max printed as VDD + 4.0; internal pull-up/pull-down disabled above 4 V 48
Input voltage on FT_c pins (absolute maximum) VIN -0.3 5.5 V 48
Input voltage on any other pin (absolute maximum) VIN -0.3 4 V 48
Current into VDD/VDDA and VDD power pins (source) IVDD/VDDA,VDD 100 mA 48
Current out of VSS/VSSA and VSS ground pins (sink) IVSS/VSSA,VSS 100 mA 48
Output current sunk by any I/O and control pin except FT_f IIO(PIN) 15 mA 48
Output current sunk by any FT_f pin IIO(PIN) 20 mA 48
Output current sourced by any I/O and control pin IIO(PIN) 15 mA 48
Total output current sunk by sum of all I/Os and control pins ΣIIO(PIN) 80 mA 49
Total output current sourced by sum of all I/Os and control pins ΣIIO(PIN) 80 mA 49
Injected current on a FT_xx pin IINJ(PIN) -5 mA Positive injection not possible (NA) 49
Injected current on a TT_a pin IINJ(PIN) -5 0 mA 49
Total injected current (sum of all I/Os and control pins) ΣIINJ(PIN) 25 mA 49
Storage temperature range TSTG -65 150 °C 49
Maximum junction temperature TJ 150 °C 49
Internal AHB clock frequency fHCLK 0 64 MHz 49
Internal APB clock frequency fPCLK 0 64 MHz 49
Supply voltage VDD/DDA 2 3.6 V Reset released functionality guaranteed down to VPDR min 49
Backup operating voltage VBAT 1.55 3.6 V 49
I/O input voltage (all except RST, TT_xx and FT_c) VIN -0.3 V Max printed as Min(VDD + 3.6, 5.5) 49
I/O input voltage (FT_c) VIN -0.3 5 V 49
Ambient temperature TA -40 85 °C 49
Junction temperature TJ -40 105 °C 49
VDD slew rate (falling) tVDD 10 µs/V VDD falling; rising max printed as infinity, not included 50
POR temporization when VDD crosses VPOR tRSTTEMPO 250 400 µs VDD rising 50
Power-on reset threshold VPOR 2.06 2.1 2.14 V 50
Power-down reset threshold VPDR 1.96 2 2.04 V 50
Internal reference voltage VREFINT 1.182 1.212 1.232 V -40°C < TJ < 105°C 50
ADC sampling time when reading the internal reference voltage tS_vrefint 4 µs Specified by design 50
Start time of reference voltage buffer when ADC is enabled tstart_vrefint 8 12 µs 50
VREFINT buffer consumption from VDD when converted by ADC IDD(VREFINTBUF) 12.5 20 µA 51
Internal reference voltage spread over the temperature range ΔVREFINT 5 7.5 mV VDD = 3 V 51
Temperature coefficient TCoeff_vrefint 30 50 ppm/°C 51
Long term stability ACoeff 300 1000 ppm 1000 hours, T = 25 °C 51
Voltage coefficient VDDCoeff 250 1200 ppm/V 3.0 V < VDD < 3.6 V 51
Supply current in Run mode, Range 1, 64 MHz, flash fetch IDD(Run) 9.4 10 mA Range 1, PLL enabled, fHCLK 64 MHz, flash, max at 85 °C, VDD 3.6 V 52
Supply current in Run mode, Range 2, 16 MHz, flash fetch IDD(Run) 2 2.5 mA Range 2, PLL enabled, fHCLK 16 MHz, flash, max at 85 °C, VDD 3.6 V 52
Supply current in Low-power run mode, 2 MHz, flash fetch IDD(LPRun) 308 930 µA PLL disabled, fHCLK 2 MHz, flash, max at 85 °C, VDD 3.6 V 53
Supply current in Sleep mode, Range 1, 64 MHz IDD(Sleep) 9.4 10 mA Range 1, flash enabled, all peripherals disabled, max at 85 °C, VDD 3.6 V 53
Supply current in Low-power sleep mode, 2 MHz IDD(LPSleep) 76 550 µA Flash disabled, PLL disabled, max at 85 °C, VDD 3.6 V 53
Supply current in Stop 0 mode, HSI kernel ON, VDD 3.6 V IDD(Stop 0) 330 523 µA HSI kernel ON, max at 85 °C, VDD 3.6 V 54
Supply current in Stop 1 mode, flash not powered, RTC disabled, VDD 3.6 V IDD(Stop 1) 3.9 110 µA Flash memory not powered, RTC disabled, max at 85 °C, VDD 3.6 V 54
Supply current in Standby mode, RTC disabled, VDD 3.6 V IDD(Standby) 1.4 23 µA RTC disabled, max at 85 °C, VDD 3.6 V 54
Wakeup time from Standby mode tWUSTBY 14.5 30 µs Transiting to Run mode; HCLK = HSI16 = 16 MHz; Regulator in Range 1 58
Transition times between regulator Range 1 and Range 2 tVOST 20 40 µs HSISYS = HSI16 59
User external clock source frequency (Range 1) fHSE_ext 8 48 MHz Voltage scaling Range 1 59
Oscillator frequency (HSE crystal) fOSC_IN 4 8 48 MHz 60
HSE current consumption during startup IDD(HSE) 5.5 mA During startup 60
User external clock source frequency (LSE) fLSE_ext 32.768 1000 kHz 59
HSI16 frequency fHSI16 15.88 16.08 MHz VDD = 3.0 V, TA = 30 °C 63
HSI16 oscillator frequency drift over temperature ΔTemp(HSI16) -2 1.5 % TA = -40 to 85 °C 63
LSI frequency over VDD and temperature fLSI 29.5 34 kHz VDD = VDD(min) to 3.6 V, TA = -40 to 85 °C 64
PLL input clock frequency fPLL_IN 2.66 16 MHz 64
PLL power consumption on VDD (VCO 96 MHz) IDD(PLL) 200 260 µA VCO freq = 96 MHz 65
Endurance NEND 1 kcycles TA = -40 to +85 °C 65
ADC analog supply voltage VDDA 2 3.6 V 76

CAD (KiCad official)

  • Symbol: STM32G0B0VET6
  • Footprint: Package_QFP:LQFP-100_14x14mm_P0.5mm
  • 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)
  • 3D model files: stm32g0b0vet6-etched.step / stm32g0b0vet6-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm32g0b0vet6.step / stm32g0b0vet6.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (111 pp, sha256 c29d182a97aa5012, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF