main
Ray Publish 0.1.0 32e6b0a

STM32G071KBU6TR

STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · UFQFPN-32(5x5)

STM32G071KBU6TR from STMicroelectronics, in a UFQFPN-32(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 PB9 bidirectional 5 V-tolerant I/O (FT_f) that is Fm+ capable; alternate functions include IR_OUT, UCPD2_FRSTX, TIM17_CH1, USART3_RX, SPI2_NSS, I2C1_SDA and EVENTOUT.
2 PC14-OSC32_IN bidirectional 5 V-tolerant I/O (FT) supplied through the RTC-domain power switch, which sinks only 3 mA, so output use is limited to 2 MHz with 30 pF and it must not source current; it also serves as OSC32_IN for the 32.768 kHz crystal.
3 PC15-OSC32_OUT bidirectional 5 V-tolerant I/O (FT) with the same power-switch limits as PC14 (3 mA sink, 2 MHz at 30 pF, no current sourcing); it also serves as OSC32_OUT, with OSC32_EN, OSC_EN and TIM15_BKIN alternate functions.
4 VDD/VDDA power_in Main supply input: VDD is 1.7 V to 3.6 V for the internal regulator and system analog, and VDDA (1.62 V for ADC and COMP, 1.8 V for DAC, 2.4 V for VREFBUF, up to 3.6 V) and VDDIO1 are provided through the same pin.
5 VSS/VSSA power_in Ground reference for the digital and analog circuitry; all voltages in the datasheet are referenced to VSS.
6 PF2-NRST bidirectional Reset pin with embedded weak pull-up (RST I/O structure) when configured as reset, and a 5 V-tolerant FT GPIO when configured as GPIO; alternate function MCO.
7 PA0 bidirectional 5 V-tolerant I/O with analog switch (FT_a); alternate functions include SPI2_SCK, USART2_CTS, TIM2_CH1_ETR, USART4_TX, LPTIM1_OUT, UCPD2_FRSTX and COMP1_OUT, and additional functions ADC_IN0, COMP1_INM, TAMP_IN2 and WKUP1.
8 PA1 bidirectional 5 V-tolerant I/O with analog switch (FT_a); alternate functions include SPI1_SCK/I2S1_CK, USART2_RTS_DE_CK, TIM2_CH2, USART4_RX, TIM15_CH1N, I2C1_SMBA and EVENTOUT, and additional functions ADC_IN1 and COMP1_INP.
9 PA2 bidirectional 5 V-tolerant I/O with analog switch (FT_a); alternate functions include SPI1_MOSI/I2S1_SD, USART2_TX, TIM2_CH3, UCPD1_FRSTX, TIM15_CH1, LPUART1_TX and COMP2_OUT, and additional functions ADC_IN2, COMP2_INM, WKUP4 and LSCO.
10 PA3 bidirectional 5 V-tolerant I/O with analog switch (FT_a); alternate functions include SPI2_MISO, USART2_RX, TIM2_CH4, UCPD2_FRSTX, TIM15_CH2, LPUART1_RX and EVENTOUT, and additional functions ADC_IN3 and COMP2_INP.
11 PA4 bidirectional 3.6 V-tolerant I/O with analog switch (TT_a); alternate functions include SPI1_NSS/I2S1_WS, SPI2_MOSI, TIM14_CH1, LPTIM2_OUT, UCPD2_FRSTX and EVENTOUT, and additional functions ADC_IN4, DAC_OUT1 and RTC_OUT2.
12 PA5 bidirectional 3.6 V-tolerant I/O with analog switch (TT_a); alternate functions include SPI1_SCK/I2S1_CK, CEC, TIM2_CH1_ETR, USART3_TX, LPTIM2_ETR, UCPD1_FRSTX and EVENTOUT, and additional functions ADC_IN5 and DAC_OUT2.
13 PA6 bidirectional 5 V-tolerant I/O with analog switch (FT_a); alternate functions include SPI1_MISO/I2S1_MCK, TIM3_CH1, TIM1_BKIN, USART3_CTS, TIM16_CH1, LPUART1_CTS and COMP1_OUT, and additional function ADC_IN6.
14 PA7 bidirectional 5 V-tolerant I/O with analog switch (FT_a); alternate functions include SPI1_MOSI/I2S1_SD, TIM3_CH2, TIM1_CH1N, TIM14_CH1, TIM17_CH1, UCPD1_FRSTX and COMP2_OUT, and additional function ADC_IN7.
15 PB0 bidirectional 5 V-tolerant I/O with analog switch (FT_a); alternate functions include SPI1_NSS/I2S1_WS, TIM3_CH3, TIM1_CH2N, USART3_RX, LPTIM1_OUT, UCPD1_FRSTX and COMP1_OUT, and additional function ADC_IN8.
16 PB1 bidirectional 5 V-tolerant I/O with analog switch (FT_a); alternate functions include TIM14_CH1, TIM3_CH4, TIM1_CH3N, USART3_RTS_DE_CK, LPTIM2_IN1, LPUART1_RTS_DE and EVENTOUT, and additional functions COMP1_INM and ADC_IN9.
17 PB2 bidirectional 5 V-tolerant I/O with analog switch (FT_a); alternate functions include SPI2_MISO, USART3_TX, LPTIM1_OUT and EVENTOUT, and additional functions COMP1_INP and ADC_IN10.
18 PA8 bidirectional USB Type-C PD capable I/O (FT_c, 5 V-tolerant); alternate functions include MCO, SPI2_NSS, TIM1_CH1, LPTIM2_OUT, EVENTOUT and UCPD1_CC1, and on reset a pull-down may be present depending on the PA9/PC6 level, which can be disabled by strobing the UCPDx_STROBE bit of SYSCFG_CFGR1 at start-up.
19 PA9 bidirectional Dead-battery and Fm+ capable I/O (FT_fd, 5 V-tolerant); alternate functions include MCO, USART1_TX, TIM1_CH2, SPI2_MISO, TIM15_BKIN, I2C1_SCL, EVENTOUT and UCPD1_DBCC1, and it can be remapped in place of PA11 via SYSCFG_CFGR1.
20 PC6 bidirectional 5 V-tolerant I/O (FT) with alternate functions UCPD1_FRSTX, TIM3_CH1 and TIM2_CH3.
21 PA10 bidirectional Dead-battery and Fm+ capable I/O (FT_fd, 5 V-tolerant); alternate functions include SPI2_MOSI, USART1_RX, TIM1_CH3, TIM17_BKIN, I2C1_SDA, EVENTOUT and UCPD1_DBCC2, and it can be remapped in place of PA12 via SYSCFG_CFGR1.
22 PA11 [PA9] bidirectional Fm+ capable I/O (FT_f, 5 V-tolerant); alternate functions include SPI1_MISO/I2S1_MCK, USART1_CTS, TIM1_CH4, TIM1_BKIN2, I2C2_SCL and COMP1_OUT, and it is the default position of PA9 when remapped through SYSCFG_CFGR1.
23 PA12 [PA10] bidirectional Fm+ capable I/O (FT_f, 5 V-tolerant); alternate functions include SPI1_MOSI/I2S1_SD, USART1_RTS_DE_CK, TIM1_ETR, I2S_CKIN, I2C2_SDA and COMP2_OUT, and it is the default position of PA10 when remapped through SYSCFG_CFGR1.
24 PA13 bidirectional 5 V-tolerant I/O (FT); upon reset it is configured as SWDIO with the internal pull-up activated, with IR_OUT and EVENTOUT as alternate functions.
25 PA14-BOOT0 bidirectional 5 V-tolerant I/O (FT); upon reset it is configured as SWCLK with the internal pull-down activated, and it also carries the BOOT0 boot-selection function shared with the GPIO, plus USART2_TX and EVENTOUT.
26 PA15 bidirectional 5 V-tolerant I/O (FT); alternate functions include SPI1_NSS/I2S1_WS, USART2_RX, TIM2_CH1_ETR, USART4_RTS_DE_CK, USART3_RTS_DE_CK and EVENTOUT.
27 PB3 bidirectional 5 V-tolerant I/O with analog switch (FT_a); alternate functions include SPI1_SCK/I2S1_CK, TIM1_CH2, TIM2_CH2, USART1_RTS_DE_CK and EVENTOUT, and additional function COMP2_INM.
28 PB4 bidirectional 5 V-tolerant I/O with analog switch (FT_a); alternate functions include SPI1_MISO/I2S1_MCK, TIM3_CH1, USART1_CTS, TIM17_BKIN and EVENTOUT, and additional function COMP2_INP.
29 PB5 bidirectional 5 V-tolerant I/O (FT); alternate functions include SPI1_MOSI/I2S1_SD, TIM3_CH2, TIM16_BKIN, LPTIM1_IN1, I2C1_SMBA and COMP2_OUT, and additional function WKUP6.
30 PB6 bidirectional 5 V-tolerant Fm+ capable I/O with analog switch (FT_fa); alternate functions include USART1_TX, TIM1_CH3, TIM16_CH1N, SPI2_MISO, LPTIM1_ETR, I2C1_SCL and EVENTOUT, and additional function COMP2_INP.
31 PB7 bidirectional 5 V-tolerant Fm+ capable I/O with analog switch (FT_fa); alternate functions include USART1_RX, SPI2_MOSI, TIM17_CH1N, USART4_CTS, LPTIM1_IN2, I2C1_SDA and EVENTOUT, and additional functions COMP2_INM and PVD_IN.
32 PB8 bidirectional 5 V-tolerant Fm+ capable I/O (FT_f); alternate functions include CEC, SPI2_SCK, TIM16_CH1, USART3_TX, TIM15_BKIN, I2C1_SCL and EVENTOUT.
33 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package UFQFPN-32(5x5)
Category Embedded Processors & Controllers
Pins 33

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
External supply voltage VDD -0.3 4 V 55
External supply voltage on VBAT pin VBAT -0.3 4 V 55
Input voltage on FT_c pins VIN -0.3 5.5 V 55
Input voltage on any other pin VIN -0.3 4 V 55
Current into VDD/VDDA power pin (source) IVDD/VDDA 100 mA 55
Current out of VSS/VSSA ground pin (sink) IVSS/VSSA 100 mA 55
Output current sunk by any I/O and control pin except FT_f IIO(PIN) 15 mA 55
Output current sunk by any FT_f pin IIO(PIN) 20 mA 55
Output current sourced by any I/O and control pin IIO(PIN) 15 mA 55
Total output current sunk by sum of all I/Os and control pins ∑IIO(PIN) 80 mA 56
Total output current sourced by sum of all I/Os and control pins ∑IIO(PIN) 80 mA 56
Injected current on a FT_xx pin IINJ(PIN) -5 mA FT_xx pin; positive injection printed as NA 56
Injected current on a TT_a pin IINJ(PIN) -5 0 mA TT_a pin 56
Total injected current (sum of all I/Os and control pins) ∑/IINJ(PIN)/ 25 mA 56
Storage temperature range TSTG -65 150 °C 56
Maximum junction temperature TJ 150 °C 56
Internal AHB clock frequency fHCLK 0 64 MHz 56
Internal APB clock frequency fPCLK 0 64 MHz 56
Standard operating voltage VDD 1.7 3.6 V 56
Analog supply voltage VDDA 1.62 3.6 V For ADC and COMP operation 56
Analog supply voltage VDDA 1.8 3.6 V For DAC operation 56
Analog supply voltage VDDA 2.4 3.6 V For VREFBUF operation 56
Backup operating voltage VBAT 1.55 3.6 V 56
I/O input voltage (FT_c) VIN -0.3 5 V FT_c pins 56
Ambient temperature TA -40 85 °C Suffix 6 57
Junction temperature TJ -40 105 °C Suffix 6 57
VDD slew rate tVDD 10 µs/V VDD falling; ULPEN = 0 57
VDD slew rate tVDD 100 ms/V VDD falling; ULPEN = 1 57
POR temporization when VDD crosses VPOR tRSTTEMPO 250 400 µs VDD rising 57
Power-on reset threshold VPOR 1.62 1.66 1.7 V 57
Power-down reset threshold VPDR 1.6 1.64 1.69 V 57
Brownout reset threshold 1 VBOR1 2.05 2.1 2.18 V VDD rising 57
Brownout reset threshold 1 VBOR1 1.95 2 2.08 V VDD falling 57
Brownout reset threshold 2 VBOR2 2.2 2.31 2.38 V VDD rising 57
Brownout reset threshold 2 VBOR2 2.1 2.21 2.28 V VDD falling 57
Brownout reset threshold 3 VBOR3 2.5 2.62 2.68 V VDD rising 57
Brownout reset threshold 3 VBOR3 2.4 2.52 2.58 V VDD falling 57
Brownout reset threshold 4 VBOR4 2.8 2.91 3 V VDD rising 58
Brownout reset threshold 4 VBOR4 2.7 2.81 2.9 V VDD falling 58
Hysteresis of VBORx and VPVDx Vhyst_BOR_PVD 100 mV 58
BOR and PVD consumption IDD(BOR_PVD) 1.6 µA Specified by design, not tested in production 58
Internal reference voltage VREFINT 1.182 1.212 1.232 V -40°C < TJ < 130°C 58
VREFINT buffer consumption from VDD when converted by ADC IDD(VREFINTBUF) 12.5 20 µA 58
Internal reference voltage spread over the temperature range ∆VREFINT 5 7.5 mV VDD = 3 V 59
Temperature coefficient TCoeff_vrefint 30 50 ppm/°C 59
Long term stability ACoeff 300 1000 ppm 1000 hours, T = 25 °C 59
Voltage coefficient VDDCoeff 250 1200 ppm/V 3.0 V < VDD < 3.6 V 59
1/4 reference voltage VREFINT_DIV1 24 25 26 % % of VREFINT 59
1/2 reference voltage VREFINT_DIV2 49 50 51 % % of VREFINT 59
3/4 reference voltage VREFINT_DIV3 74 75 76 % % of VREFINT 59
Supply current in Run mode IDD(Run) 6.3 7 mA Range 1; PLL enabled; fHCLK 64 MHz; flash; max at 85 °C; typ at 25 °C 60
Supply current in Run mode IDD(Run) 1.4 2 mA Range 2; PLL enabled; fHCLK 16 MHz; flash; max at 85 °C; typ at 25 °C 60
Supply current in Low-power run mode IDD(LPRun) 220 795 µA PLL disabled; fHCLK 2 MHz; flash; max at 85 °C; typ at 25 °C 61
Supply current in Sleep mode IDD(Sleep) 1.8 2.1 mA Range 1; fHCLK 64 MHz; all peripherals disabled; max at 85 °C; typ at 25 °C 63
Supply current in Low-power sleep mode IDD(LPSleep) 60 360 µA Flash disabled; PLL disabled; fHCLK 2 MHz; max at 85 °C; typ at 25 °C 63
Supply current in Stop 0 mode IDD(Stop 0) 285 500 µA HSI kernel enabled; VDD 3.6 V; max at 85 °C; typ at 25 °C 63
Supply current in Stop 1 mode IDD(Stop 1) 4.4 145 µA Flash not powered; RTC enabled; VDD 3.6 V; max at 85 °C; typ at 25 °C 64
Supply current in Standby mode IDD(Standby) 0.34 16 µA RTC disabled; VDD 3.6 V; max at 85 °C; typ at 25 °C 64
Supply current in Shutdown mode IDD(Shutdown) 53 5300 nA RTC disabled; VDD 3.6 V; max at 85 °C; typ at 25 °C 65

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: STM32G071KBU6TR
  • Footprint: Package_DFN_QFN:UFQFPN-32-1EP_5x5mm_P0.5mm_EP3.5x3.5mm
  • 3D model: UFQFPN-32(5x5), generated on the KiCad land (body 5 x 5 mm, terminals on the pads, 0.55 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: stm32g071kbu6tr-etched.step / stm32g071kbu6tr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm32g071kbu6tr.step / stm32g071kbu6tr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (143 pp, sha256 a83ee1377da65257, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF