3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownSTM32G071KBU6TR
STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · UFQFPN-32(5x5)
STM32G071KBU6TR from STMicroelectronics, in a UFQFPN-32(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PB9 | bidirectional | 5 V-tolerant I/O (FT_f) that is Fm+ capable; alternate functions include IR_OUT, UCPD2_FRSTX, TIM17_CH1, USART3_RX, SPI2_NSS, I2C1_SDA and EVENTOUT. |
| 2 | PC14-OSC32_IN | bidirectional | 5 V-tolerant I/O (FT) supplied through the RTC-domain power switch, which sinks only 3 mA, so output use is limited to 2 MHz with 30 pF and it must not source current; it also serves as OSC32_IN for the 32.768 kHz crystal. |
| 3 | PC15-OSC32_OUT | bidirectional | 5 V-tolerant I/O (FT) with the same power-switch limits as PC14 (3 mA sink, 2 MHz at 30 pF, no current sourcing); it also serves as OSC32_OUT, with OSC32_EN, OSC_EN and TIM15_BKIN alternate functions. |
| 4 | VDD/VDDA | power_in | Main supply input: VDD is 1.7 V to 3.6 V for the internal regulator and system analog, and VDDA (1.62 V for ADC and COMP, 1.8 V for DAC, 2.4 V for VREFBUF, up to 3.6 V) and VDDIO1 are provided through the same pin. |
| 5 | VSS/VSSA | power_in | Ground reference for the digital and analog circuitry; all voltages in the datasheet are referenced to VSS. |
| 6 | PF2-NRST | bidirectional | Reset pin with embedded weak pull-up (RST I/O structure) when configured as reset, and a 5 V-tolerant FT GPIO when configured as GPIO; alternate function MCO. |
| 7 | PA0 | bidirectional | 5 V-tolerant I/O with analog switch (FT_a); alternate functions include SPI2_SCK, USART2_CTS, TIM2_CH1_ETR, USART4_TX, LPTIM1_OUT, UCPD2_FRSTX and COMP1_OUT, and additional functions ADC_IN0, COMP1_INM, TAMP_IN2 and WKUP1. |
| 8 | PA1 | bidirectional | 5 V-tolerant I/O with analog switch (FT_a); alternate functions include SPI1_SCK/I2S1_CK, USART2_RTS_DE_CK, TIM2_CH2, USART4_RX, TIM15_CH1N, I2C1_SMBA and EVENTOUT, and additional functions ADC_IN1 and COMP1_INP. |
| 9 | PA2 | bidirectional | 5 V-tolerant I/O with analog switch (FT_a); alternate functions include SPI1_MOSI/I2S1_SD, USART2_TX, TIM2_CH3, UCPD1_FRSTX, TIM15_CH1, LPUART1_TX and COMP2_OUT, and additional functions ADC_IN2, COMP2_INM, WKUP4 and LSCO. |
| 10 | PA3 | bidirectional | 5 V-tolerant I/O with analog switch (FT_a); alternate functions include SPI2_MISO, USART2_RX, TIM2_CH4, UCPD2_FRSTX, TIM15_CH2, LPUART1_RX and EVENTOUT, and additional functions ADC_IN3 and COMP2_INP. |
| 11 | PA4 | bidirectional | 3.6 V-tolerant I/O with analog switch (TT_a); alternate functions include SPI1_NSS/I2S1_WS, SPI2_MOSI, TIM14_CH1, LPTIM2_OUT, UCPD2_FRSTX and EVENTOUT, and additional functions ADC_IN4, DAC_OUT1 and RTC_OUT2. |
| 12 | PA5 | bidirectional | 3.6 V-tolerant I/O with analog switch (TT_a); alternate functions include SPI1_SCK/I2S1_CK, CEC, TIM2_CH1_ETR, USART3_TX, LPTIM2_ETR, UCPD1_FRSTX and EVENTOUT, and additional functions ADC_IN5 and DAC_OUT2. |
| 13 | PA6 | bidirectional | 5 V-tolerant I/O with analog switch (FT_a); alternate functions include SPI1_MISO/I2S1_MCK, TIM3_CH1, TIM1_BKIN, USART3_CTS, TIM16_CH1, LPUART1_CTS and COMP1_OUT, and additional function ADC_IN6. |
| 14 | PA7 | bidirectional | 5 V-tolerant I/O with analog switch (FT_a); alternate functions include SPI1_MOSI/I2S1_SD, TIM3_CH2, TIM1_CH1N, TIM14_CH1, TIM17_CH1, UCPD1_FRSTX and COMP2_OUT, and additional function ADC_IN7. |
| 15 | PB0 | bidirectional | 5 V-tolerant I/O with analog switch (FT_a); alternate functions include SPI1_NSS/I2S1_WS, TIM3_CH3, TIM1_CH2N, USART3_RX, LPTIM1_OUT, UCPD1_FRSTX and COMP1_OUT, and additional function ADC_IN8. |
| 16 | PB1 | bidirectional | 5 V-tolerant I/O with analog switch (FT_a); alternate functions include TIM14_CH1, TIM3_CH4, TIM1_CH3N, USART3_RTS_DE_CK, LPTIM2_IN1, LPUART1_RTS_DE and EVENTOUT, and additional functions COMP1_INM and ADC_IN9. |
| 17 | PB2 | bidirectional | 5 V-tolerant I/O with analog switch (FT_a); alternate functions include SPI2_MISO, USART3_TX, LPTIM1_OUT and EVENTOUT, and additional functions COMP1_INP and ADC_IN10. |
| 18 | PA8 | bidirectional | USB Type-C PD capable I/O (FT_c, 5 V-tolerant); alternate functions include MCO, SPI2_NSS, TIM1_CH1, LPTIM2_OUT, EVENTOUT and UCPD1_CC1, and on reset a pull-down may be present depending on the PA9/PC6 level, which can be disabled by strobing the UCPDx_STROBE bit of SYSCFG_CFGR1 at start-up. |
| 19 | PA9 | bidirectional | Dead-battery and Fm+ capable I/O (FT_fd, 5 V-tolerant); alternate functions include MCO, USART1_TX, TIM1_CH2, SPI2_MISO, TIM15_BKIN, I2C1_SCL, EVENTOUT and UCPD1_DBCC1, and it can be remapped in place of PA11 via SYSCFG_CFGR1. |
| 20 | PC6 | bidirectional | 5 V-tolerant I/O (FT) with alternate functions UCPD1_FRSTX, TIM3_CH1 and TIM2_CH3. |
| 21 | PA10 | bidirectional | Dead-battery and Fm+ capable I/O (FT_fd, 5 V-tolerant); alternate functions include SPI2_MOSI, USART1_RX, TIM1_CH3, TIM17_BKIN, I2C1_SDA, EVENTOUT and UCPD1_DBCC2, and it can be remapped in place of PA12 via SYSCFG_CFGR1. |
| 22 | PA11 [PA9] | bidirectional | Fm+ capable I/O (FT_f, 5 V-tolerant); alternate functions include SPI1_MISO/I2S1_MCK, USART1_CTS, TIM1_CH4, TIM1_BKIN2, I2C2_SCL and COMP1_OUT, and it is the default position of PA9 when remapped through SYSCFG_CFGR1. |
| 23 | PA12 [PA10] | bidirectional | Fm+ capable I/O (FT_f, 5 V-tolerant); alternate functions include SPI1_MOSI/I2S1_SD, USART1_RTS_DE_CK, TIM1_ETR, I2S_CKIN, I2C2_SDA and COMP2_OUT, and it is the default position of PA10 when remapped through SYSCFG_CFGR1. |
| 24 | PA13 | bidirectional | 5 V-tolerant I/O (FT); upon reset it is configured as SWDIO with the internal pull-up activated, with IR_OUT and EVENTOUT as alternate functions. |
| 25 | PA14-BOOT0 | bidirectional | 5 V-tolerant I/O (FT); upon reset it is configured as SWCLK with the internal pull-down activated, and it also carries the BOOT0 boot-selection function shared with the GPIO, plus USART2_TX and EVENTOUT. |
| 26 | PA15 | bidirectional | 5 V-tolerant I/O (FT); alternate functions include SPI1_NSS/I2S1_WS, USART2_RX, TIM2_CH1_ETR, USART4_RTS_DE_CK, USART3_RTS_DE_CK and EVENTOUT. |
| 27 | PB3 | bidirectional | 5 V-tolerant I/O with analog switch (FT_a); alternate functions include SPI1_SCK/I2S1_CK, TIM1_CH2, TIM2_CH2, USART1_RTS_DE_CK and EVENTOUT, and additional function COMP2_INM. |
| 28 | PB4 | bidirectional | 5 V-tolerant I/O with analog switch (FT_a); alternate functions include SPI1_MISO/I2S1_MCK, TIM3_CH1, USART1_CTS, TIM17_BKIN and EVENTOUT, and additional function COMP2_INP. |
| 29 | PB5 | bidirectional | 5 V-tolerant I/O (FT); alternate functions include SPI1_MOSI/I2S1_SD, TIM3_CH2, TIM16_BKIN, LPTIM1_IN1, I2C1_SMBA and COMP2_OUT, and additional function WKUP6. |
| 30 | PB6 | bidirectional | 5 V-tolerant Fm+ capable I/O with analog switch (FT_fa); alternate functions include USART1_TX, TIM1_CH3, TIM16_CH1N, SPI2_MISO, LPTIM1_ETR, I2C1_SCL and EVENTOUT, and additional function COMP2_INP. |
| 31 | PB7 | bidirectional | 5 V-tolerant Fm+ capable I/O with analog switch (FT_fa); alternate functions include USART1_RX, SPI2_MOSI, TIM17_CH1N, USART4_CTS, LPTIM1_IN2, I2C1_SDA and EVENTOUT, and additional functions COMP2_INM and PVD_IN. |
| 32 | PB8 | bidirectional | 5 V-tolerant Fm+ capable I/O (FT_f); alternate functions include CEC, SPI2_SCK, TIM16_CH1, USART3_TX, TIM15_BKIN, I2C1_SCL and EVENTOUT. |
| 33 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | UFQFPN-32(5x5) |
| Category | Embedded Processors & Controllers |
| Pins | 33 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| External supply voltage | VDD | -0.3 | 4 | V | 55 | ||
| External supply voltage on VBAT pin | VBAT | -0.3 | 4 | V | 55 | ||
| Input voltage on FT_c pins | VIN | -0.3 | 5.5 | V | 55 | ||
| Input voltage on any other pin | VIN | -0.3 | 4 | V | 55 | ||
| Current into VDD/VDDA power pin (source) | IVDD/VDDA | 100 | mA | 55 | |||
| Current out of VSS/VSSA ground pin (sink) | IVSS/VSSA | 100 | mA | 55 | |||
| Output current sunk by any I/O and control pin except FT_f | IIO(PIN) | 15 | mA | 55 | |||
| Output current sunk by any FT_f pin | IIO(PIN) | 20 | mA | 55 | |||
| Output current sourced by any I/O and control pin | IIO(PIN) | 15 | mA | 55 | |||
| Total output current sunk by sum of all I/Os and control pins | ∑IIO(PIN) | 80 | mA | 56 | |||
| Total output current sourced by sum of all I/Os and control pins | ∑IIO(PIN) | 80 | mA | 56 | |||
| Injected current on a FT_xx pin | IINJ(PIN) | -5 | mA | FT_xx pin; positive injection printed as NA | 56 | ||
| Injected current on a TT_a pin | IINJ(PIN) | -5 | 0 | mA | TT_a pin | 56 | |
| Total injected current (sum of all I/Os and control pins) | ∑/IINJ(PIN)/ | 25 | mA | 56 | |||
| Storage temperature range | TSTG | -65 | 150 | °C | 56 | ||
| Maximum junction temperature | TJ | 150 | °C | 56 | |||
| Internal AHB clock frequency | fHCLK | 0 | 64 | MHz | 56 | ||
| Internal APB clock frequency | fPCLK | 0 | 64 | MHz | 56 | ||
| Standard operating voltage | VDD | 1.7 | 3.6 | V | 56 | ||
| Analog supply voltage | VDDA | 1.62 | 3.6 | V | For ADC and COMP operation | 56 | |
| Analog supply voltage | VDDA | 1.8 | 3.6 | V | For DAC operation | 56 | |
| Analog supply voltage | VDDA | 2.4 | 3.6 | V | For VREFBUF operation | 56 | |
| Backup operating voltage | VBAT | 1.55 | 3.6 | V | 56 | ||
| I/O input voltage (FT_c) | VIN | -0.3 | 5 | V | FT_c pins | 56 | |
| Ambient temperature | TA | -40 | 85 | °C | Suffix 6 | 57 | |
| Junction temperature | TJ | -40 | 105 | °C | Suffix 6 | 57 | |
| VDD slew rate | tVDD | 10 | µs/V | VDD falling; ULPEN = 0 | 57 | ||
| VDD slew rate | tVDD | 100 | ms/V | VDD falling; ULPEN = 1 | 57 | ||
| POR temporization when VDD crosses VPOR | tRSTTEMPO | 250 | 400 | µs | VDD rising | 57 | |
| Power-on reset threshold | VPOR | 1.62 | 1.66 | 1.7 | V | 57 | |
| Power-down reset threshold | VPDR | 1.6 | 1.64 | 1.69 | V | 57 | |
| Brownout reset threshold 1 | VBOR1 | 2.05 | 2.1 | 2.18 | V | VDD rising | 57 |
| Brownout reset threshold 1 | VBOR1 | 1.95 | 2 | 2.08 | V | VDD falling | 57 |
| Brownout reset threshold 2 | VBOR2 | 2.2 | 2.31 | 2.38 | V | VDD rising | 57 |
| Brownout reset threshold 2 | VBOR2 | 2.1 | 2.21 | 2.28 | V | VDD falling | 57 |
| Brownout reset threshold 3 | VBOR3 | 2.5 | 2.62 | 2.68 | V | VDD rising | 57 |
| Brownout reset threshold 3 | VBOR3 | 2.4 | 2.52 | 2.58 | V | VDD falling | 57 |
| Brownout reset threshold 4 | VBOR4 | 2.8 | 2.91 | 3 | V | VDD rising | 58 |
| Brownout reset threshold 4 | VBOR4 | 2.7 | 2.81 | 2.9 | V | VDD falling | 58 |
| Hysteresis of VBORx and VPVDx | Vhyst_BOR_PVD | 100 | mV | 58 | |||
| BOR and PVD consumption | IDD(BOR_PVD) | 1.6 | µA | Specified by design, not tested in production | 58 | ||
| Internal reference voltage | VREFINT | 1.182 | 1.212 | 1.232 | V | -40°C < TJ < 130°C | 58 |
| VREFINT buffer consumption from VDD when converted by ADC | IDD(VREFINTBUF) | 12.5 | 20 | µA | 58 | ||
| Internal reference voltage spread over the temperature range | ∆VREFINT | 5 | 7.5 | mV | VDD = 3 V | 59 | |
| Temperature coefficient | TCoeff_vrefint | 30 | 50 | ppm/°C | 59 | ||
| Long term stability | ACoeff | 300 | 1000 | ppm | 1000 hours, T = 25 °C | 59 | |
| Voltage coefficient | VDDCoeff | 250 | 1200 | ppm/V | 3.0 V < VDD < 3.6 V | 59 | |
| 1/4 reference voltage | VREFINT_DIV1 | 24 | 25 | 26 | % | % of VREFINT | 59 |
| 1/2 reference voltage | VREFINT_DIV2 | 49 | 50 | 51 | % | % of VREFINT | 59 |
| 3/4 reference voltage | VREFINT_DIV3 | 74 | 75 | 76 | % | % of VREFINT | 59 |
| Supply current in Run mode | IDD(Run) | 6.3 | 7 | mA | Range 1; PLL enabled; fHCLK 64 MHz; flash; max at 85 °C; typ at 25 °C | 60 | |
| Supply current in Run mode | IDD(Run) | 1.4 | 2 | mA | Range 2; PLL enabled; fHCLK 16 MHz; flash; max at 85 °C; typ at 25 °C | 60 | |
| Supply current in Low-power run mode | IDD(LPRun) | 220 | 795 | µA | PLL disabled; fHCLK 2 MHz; flash; max at 85 °C; typ at 25 °C | 61 | |
| Supply current in Sleep mode | IDD(Sleep) | 1.8 | 2.1 | mA | Range 1; fHCLK 64 MHz; all peripherals disabled; max at 85 °C; typ at 25 °C | 63 | |
| Supply current in Low-power sleep mode | IDD(LPSleep) | 60 | 360 | µA | Flash disabled; PLL disabled; fHCLK 2 MHz; max at 85 °C; typ at 25 °C | 63 | |
| Supply current in Stop 0 mode | IDD(Stop 0) | 285 | 500 | µA | HSI kernel enabled; VDD 3.6 V; max at 85 °C; typ at 25 °C | 63 | |
| Supply current in Stop 1 mode | IDD(Stop 1) | 4.4 | 145 | µA | Flash not powered; RTC enabled; VDD 3.6 V; max at 85 °C; typ at 25 °C | 64 | |
| Supply current in Standby mode | IDD(Standby) | 0.34 | 16 | µA | RTC disabled; VDD 3.6 V; max at 85 °C; typ at 25 °C | 64 | |
| Supply current in Shutdown mode | IDD(Shutdown) | 53 | 5300 | nA | RTC disabled; VDD 3.6 V; max at 85 °C; typ at 25 °C | 65 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
STM32G071KBU6TR - Footprint:
Package_DFN_QFN:UFQFPN-32-1EP_5x5mm_P0.5mm_EP3.5x3.5mm - 3D model: UFQFPN-32(5x5), generated on the KiCad land (body 5 x 5 mm, terminals on the pads, 0.55 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
stm32g071kbu6tr-etched.step/stm32g071kbu6tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32g071kbu6tr.step/stm32g071kbu6tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (143 pp, sha256
a83ee1377da65257, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).