main
Ray
Publish 0.1.0
e2aa21b
STM32G071C8U7TR
STMicroelectronics · IC · UFQFPN-48(7x7)
STM32G071C8U7TR from STMicroelectronics, in a UFQFPN-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PC13 | bidirectional | 5 V tolerant GPIO (FT) that is supplied through the power switch and sinks only 3 mA, so it must not source current and output speed is limited to 2 MHz at 30 pF; also TAMP_IN1, RTC_TS, RTC_OUT1 and WKUP2. |
| 2 | PC14-OSC32_IN | bidirectional | 5 V tolerant GPIO (FT) on the power-switch domain, with the same 3 mA sink and 2 MHz output limits as PC13, that is used as the 32.768 kHz LSE oscillator input OSC32_IN. |
| 3 | PC15-OSC32_OUT | bidirectional | 5 V tolerant GPIO (FT) on the power-switch domain, with the same 3 mA sink and 2 MHz output limits as PC13, that is used as the 32.768 kHz LSE oscillator output OSC32_OUT. |
| 4 | VBAT | power_in | Power supply input from 1.55 V to 3.6 V for the RTC, TAMP, LSE oscillator and backup registers when VDD is not present. |
| 5 | VREF+ | power_in | Analog reference voltage input, or output of the internal voltage reference buffer when enabled; it must equal VDDA when VDDA < 2 V and be between 2 V and VDDA when VDDA ≥ 2 V. |
| 6 | VDD/VDDA | power_in | Main supply from 1.7 V to 3.6 V for the internal regulator, I/Os and analog blocks, with VDDA limits of 1.62 V (ADC and COMP), 1.8 V (DAC) and 2.4 V (VREFBUF) minimum. |
| 7 | VSS/VSSA | power_in | Ground reference for the digital and analog supply, which must be decoupled with ceramic capacitors placed as close as possible to the pin pair. |
| 8 | PF0-OSC_IN | bidirectional | 5 V tolerant GPIO (FT) that is also the HSE oscillator input OSC_IN and can be used as TIM14_CH1. |
| 9 | PF1-OSC_OUT | bidirectional | 5 V tolerant GPIO (FT) that is also the HSE oscillator output OSC_OUT and can be used as TIM15_CH1N or OSC_EN. |
| 10 | PF2-NRST | bidirectional | Reset pin with embedded weak pull-up (RST structure) when configured as reset, or a 5 V tolerant GPIO (FT) when configured as GPIO; it can also output MCO. |
| 11 | PA0 | bidirectional | Fast-mode-capable 5 V tolerant analog-switch I/O (FT_a) with ADC_IN0, COMP1_INM, WKUP1 and TAMP_IN2 functions. |
| 12 | PA1 | bidirectional | 5 V tolerant analog-switch I/O (FT_a) with ADC_IN1 and COMP1_INP as additional functions. |
| 13 | PA2 | bidirectional | 5 V tolerant analog-switch I/O (FT_a) with ADC_IN2, COMP2_INM and WKUP4 as additional functions. |
| 14 | PA3 | bidirectional | 5 V tolerant analog-switch I/O (FT_a) with ADC_IN3 and COMP2_INP as additional functions. |
| 15 | PA4 | bidirectional | 3.6 V tolerant analog-switch I/O (TT_a) with ADC_IN4, DAC_OUT1 and RTC_OUT2 as additional functions. |
| 16 | PA5 | bidirectional | 3.6 V tolerant analog-switch I/O (TT_a) with ADC_IN5 and DAC_OUT2 as additional functions. |
| 17 | PA6 | bidirectional | 5 V tolerant analog-switch I/O (FT_a) with ADC_IN6 as additional function and COMP1_OUT as alternate function. |
| 18 | PA7 | bidirectional | 5 V tolerant analog-switch I/O (FT_a) with ADC_IN7 as additional function and COMP2_OUT as alternate function. |
| 19 | PB0 | bidirectional | 5 V tolerant analog-switch I/O (FT_a) with ADC_IN8 as additional function and COMP1_OUT as alternate function. |
| 20 | PB1 | bidirectional | 5 V tolerant analog-switch I/O (FT_a) with COMP1_INM and ADC_IN9 as additional functions. |
| 21 | PB2 | bidirectional | 5 V tolerant analog-switch I/O (FT_a) with COMP1_INP and ADC_IN10 as additional functions. |
| 22 | PB10 | bidirectional | 5 V tolerant I/O with Fm+ and analog-switch capability (FT_fa), with ADC_IN11 as additional function. |
| 23 | PB11 | bidirectional | 5 V tolerant I/O with Fm+ and analog-switch capability (FT_fa), with ADC_IN15 as additional function. |
| 24 | PB12 | bidirectional | 5 V tolerant analog-switch I/O (FT_a) with ADC_IN16 as additional function. |
| 25 | PB13 | bidirectional | 5 V tolerant I/O with Fm+ capability (FT_f) that has SPI2_SCK, LPUART1_CTS and I2C2_SCL as alternate functions. |
| 26 | PB14 | bidirectional | 5 V tolerant I/O with Fm+ capability (FT_f) that has SPI2_MISO, UCPD1_FRSTX and I2C2_SDA as alternate functions. |
| 27 | PB15 | bidirectional | 5 V tolerant USB Type-C PD capable I/O (FT_c) that may show a pull-down at reset depending on PA10/PB0 level, which can be disabled by strobing UCPDx_STROBE during start-up. |
| 28 | PA8 | bidirectional | 5 V tolerant USB Type-C PD capable I/O (FT_c) with MCO and TIM1_CH1 alternate functions and UCPD1_CC1 as additional function. |
| 29 | PA9 | bidirectional | 5 V tolerant I/O with Fm+ and USB Type-C PD dead-battery function (FT_fd) that has USART1_TX, I2C1_SCL and MCO as alternate functions. |
| 30 | PC6 | bidirectional | 5 V tolerant I/O (FT) with UCPD1_FRSTX, TIM3_CH1 and TIM2_CH3 as alternate functions. |
| 31 | PC7 | bidirectional | 5 V tolerant I/O (FT) with UCPD2_FRSTX, TIM3_CH2 and TIM2_CH4 as alternate functions. |
| 32 | PA10 | bidirectional | 5 V tolerant Fm+ and USB Type-C PD dead-battery capable I/O (FT_fd) with USART1_RX, I2C1_SDA and TIM1_CH3 as alternate functions. |
| 33 | PA11 [PA9] | bidirectional | 5 V tolerant Fm+ capable I/O (FT_f) that can be remapped with PA9 using SYSCFG_CFGR1, with USART1_CTS, TIM1_CH4 and COMP1_OUT as alternate functions. |
| 34 | PA12 [PA10] | bidirectional | 5 V tolerant Fm+ capable I/O (FT_f) that can be remapped with PA10 using SYSCFG_CFGR1, with USART1_RTS_DE_CK, TIM1_ETR and COMP2_OUT as alternate functions. |
| 35 | PA13 | bidirectional | 5 V tolerant I/O (FT) that is configured as SWDIO at reset with an internal pull-up enabled. |
| 36 | PA14-BOOT0 | bidirectional | 5 V tolerant I/O (FT) that is configured as SWCLK at reset with an internal pull-down enabled and also serves as the BOOT0 boot selection pin. |
| 37 | PA15 | bidirectional | 5 V tolerant I/O (FT) with SPI1_NSS/I2S1_WS, USART2_RX and TIM2_CH1_ETR as alternate functions. |
| 38 | PD0 | bidirectional | 5 V tolerant USB Type-C PD capable I/O (FT_c) that may show a pull-down at reset depending on PD1 level, which can be disabled by strobing UCPDx_STROBE during start-up. |
| 39 | PD1 | bidirectional | 5 V tolerant I/O with USB Type-C PD dead-battery function (FT_d) with EVENTOUT, SPI2_SCK and TIM17_CH1 as alternate functions. |
| 40 | PD2 | bidirectional | 5 V tolerant USB Type-C PD capable I/O (FT_c) with USART3_RTS_DE_CK, TIM3_ETR and TIM1_CH1N as alternate functions. |
| 41 | PD3 | bidirectional | 5 V tolerant I/O with USB Type-C PD dead-battery function (FT_d) with USART2_CTS, SPI2_MISO and TIM1_CH2N as alternate functions. |
| 42 | PB3 | bidirectional | 5 V tolerant analog-switch I/O (FT_a) with SPI1_SCK/I2S1_CK, TIM1_CH2, TIM2_CH2 and USART1_RTS_DE_CK as alternate functions. |
| 43 | PB4 | bidirectional | 5 V tolerant analog-switch I/O (FT_a) with SPI1_MISO/I2S1_MCK, TIM3_CH1 and USART1_CTS as alternate functions and COMP2_INP as additional function. |
| 44 | PB5 | bidirectional | 5 V tolerant I/O (FT) with SPI1_MOSI/I2S1_SD, TIM3_CH2 and I2C1_SMBA as alternate functions and WKUP6 as additional function. |
| 45 | PB6 | bidirectional | 5 V tolerant Fm+ and analog-switch capable I/O (FT_fa) with USART1_TX, TIM1_CH3 and I2C1_SCL as alternate functions and COMP2_INP as additional function. |
| 46 | PB7 | bidirectional | 5 V tolerant Fm+ and analog-switch capable I/O (FT_fa) with USART1_RX, SPI2_MOSI and I2C1_SDA as alternate functions and PVD_IN as additional function. |
| 47 | PB8 | bidirectional | 5 V tolerant Fm+ capable I/O (FT_f) with CEC, SPI2_SCK, TIM16_CH1, USART3_TX and I2C1_SCL as alternate functions. |
| 48 | PB9 | bidirectional | 5 V tolerant Fm+ capable I/O (FT_f) with IR_OUT, UCPD2_FRSTX, TIM17_CH1, USART3_RX, SPI2_NSS and I2C1_SDA as alternate functions. |
| 49 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | UFQFPN-48(7x7) |
| Category | |
| Pins | 49 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Internal AHB clock frequency | fHCLK | 0 | 64 | MHz | 56 | ||
| Internal APB clock frequency | fPCLK | 0 | 64 | MHz | 56 | ||
| Standard operating voltage | VDD | 1.7 | 3.6 | V | 56 | ||
| Analog supply voltage | VDDA | 1.62 | 3.6 | V | For ADC and COMP operation | 56 | |
| Analog supply voltage | VDDA | 1.8 | 3.6 | V | For DAC operation | 56 | |
| Analog supply voltage | VDDA | 2.4 | 3.6 | V | For VREFBUF operation | 56 | |
| Backup operating voltage | VBAT | 1.55 | 3.6 | V | 56 | ||
| I/O input voltage (all except RST, TT_xx, FT_c) | VIN | -0.3 | V | Max is Min(VDD + 3.6, 5.5) | 56 | ||
| I/O input voltage RST | VIN | -0.3 | V | Max is VDD + 0.3 | 56 | ||
| I/O input voltage TT_xx | VIN | -0.3 | V | Max is VDDA + 0.3 | 56 | ||
| I/O input voltage FT_c | VIN | -0.3 | 5 | V | 56 | ||
| Ambient temperature suffix 7 | TA | -40 | 105 | °C | Suffix 7 | 57 | |
| Junction temperature suffix 7 | TJ | -40 | 125 | °C | Suffix 7 | 57 | |
| VDD slew rate falling, ULPEN=0 | tVDD | 10 | µs/V | VDD falling; ULPEN = 0 | 57 | ||
| VDD slew rate falling, ULPEN=1 | tVDD | 100 | ms/V | VDD falling; ULPEN = 1 | 57 | ||
| POR temporization | tRSTTEMPO | 250 | 400 | µs | VDD rising | 57 | |
| Power-on reset threshold | VPOR | 1.62 | 1.66 | 1.7 | V | 57 | |
| Power-down reset threshold | VPDR | 1.6 | 1.64 | 1.69 | V | 57 | |
| Brownout reset threshold 1, rising | VBOR1 | 2.05 | 2.1 | 2.18 | V | VDD rising | 57 |
| Brownout reset threshold 1, falling | VBOR1 | 1.95 | 2 | 2.08 | V | VDD falling | 57 |
| Brownout reset threshold 4, rising | VBOR4 | 2.8 | 2.91 | 3 | V | VDD rising | 57 |
| Brownout reset threshold 4, falling | VBOR4 | 2.7 | 2.81 | 2.9 | V | VDD falling | 57 |
| Internal reference voltage | VREFINT | 1.182 | 1.212 | 1.232 | V | -40°C < TJ < 130°C | 58 |
| HSI16 frequency | fHSI16 | 15.88 | 16.08 | MHz | VDD=3.0 V, TA=30 °C | 74 | |
| HSI16 frequency drift over temperature | ΔTemp(HSI16) | -1 | 1 | % | TA= 0 to 85 °C | 74 | |
| HSI16 frequency drift over temperature | ΔTemp(HSI16) | -2 | 1.5 | % | TA= -40 to 125 °C | 74 | |
| HSI16 frequency drift over VDD | ΔVDD(HSI16) | -0.1 | 0.05 | % | VDD=1.62 V to 3.6 V | 74 | |
| HSI16 duty cycle | DHSI16 | 45 | 55 | % | 74 | ||
| LSI frequency | fLSI | 31.04 | 32.96 | kHz | VDD = 3.0 V, TA = 30 °C | 75 | |
| LSI frequency | fLSI | 29.5 | 34 | kHz | VDD = 1.62 V to 3.6 V, TA = -40 to 125 °C | 75 | |
| High-speed external user clock frequency, Range 1 | fHSE_ext | 8 | 48 | MHz | Voltage scaling Range 1 | 71 | |
| HSE oscillator frequency | fOSC_IN | 4 | 48 | MHz | 71 | ||
| PLL input clock frequency | fPLL_IN | 2.66 | 16 | MHz | 76 | ||
| PLL input clock duty cycle | DPLL_IN | 45 | 55 | % | 76 | ||
| Endurance | NEND | 10 | kcycles | TA = -40 to +105 °C | 77 | ||
| Data retention | tRET | 30 | Years | 1 kcycle at TA = 85 °C | 77 | ||
| Data retention | tRET | 15 | Years | 1 kcycle at TA = 105 °C | 77 | ||
| Data retention | tRET | 7 | Years | 1 kcycle at TA = 125 °C | 77 | ||
| Voltage on VDD external supply | VDD | -0.3 | 4 | V | 55 | ||
| Voltage on VBAT external supply | VBAT | -0.3 | 4 | V | 55 | ||
| External voltage on VREF+ pin | VREF+ | -0.3 | V | Max is Min(VDD + 0.4, 4.0) | 55 | ||
| Input voltage on FT_xx pins except FT_c | VIN | -0.3 | V | Max is VDD + 4.0 | 55 | ||
| Input voltage on FT_c pins | VIN | -0.3 | 5.5 | V | 55 | ||
| Input voltage on any other pin | VIN | -0.3 | 4 | V | 55 | ||
| Current into VDD/VDDA power pin (source) | IVDD/VDDA | 100 | mA | 55 | |||
| Current out of VSS/VSSA ground pin (sink) | IVSS/VSSA | 100 | mA | 55 | |||
| Output current sunk by any I/O and control pin except FT_f | IIO(PIN) | 15 | mA | 55 | |||
| Output current sunk by any FT_f pin | IIO(PIN) | 20 | mA | 55 | |||
| Output current sourced by any I/O and control pin | IIO(PIN) | 15 | mA | 55 | |||
| Total output current sunk by sum of all I/Os and control pins | ΣIIO(PIN) | 80 | mA | 56 | |||
| Total output current sourced by sum of all I/Os and control pins | ΣIIO(PIN) | 80 | mA | 56 | |||
| Total injected current (sum of all I/Os and control pins) | ∑/IINJ(PIN)/ | 25 | mA | 56 | |||
| Storage temperature range | TSTG | -65 | 150 | °C | 56 | ||
| Maximum junction temperature | TJ | 150 | °C | 56 |
CAD (KiCad official)
- Symbol:
STM32G071C8U7TR - Footprint:
Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm - 3D model: UFQFPN-48(7x7) (KiCad packages3D, STEP)
- 3D model files:
stm32g071c8u7tr-etched.step/stm32g071c8u7tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32g071c8u7tr.step/stm32g071c8u7tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (143 pp, sha256
a83ee1377da65257, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# STM32G071C8U7TR
**STMicroelectronics** · IC · UFQFPN-48(7x7)
STM32G071C8U7TR from STMicroelectronics, in a UFQFPN-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PC13 | bidirectional | 5 V tolerant GPIO (FT) that is supplied through the power switch and sinks only 3 mA, so it must not source current and output speed is limited to 2 MHz at 30 pF; also TAMP_IN1, RTC_TS, RTC_OUT1 and WKUP2. |
| 2 | PC14-OSC32_IN | bidirectional | 5 V tolerant GPIO (FT) on the power-switch domain, with the same 3 mA sink and 2 MHz output limits as PC13, that is used as the 32.768 kHz LSE oscillator input OSC32_IN. |
| 3 | PC15-OSC32_OUT | bidirectional | 5 V tolerant GPIO (FT) on the power-switch domain, with the same 3 mA sink and 2 MHz output limits as PC13, that is used as the 32.768 kHz LSE oscillator output OSC32_OUT. |
| 4 | VBAT | power_in | Power supply input from 1.55 V to 3.6 V for the RTC, TAMP, LSE oscillator and backup registers when VDD is not present. |
| 5 | VREF+ | power_in | Analog reference voltage input, or output of the internal voltage reference buffer when enabled; it must equal VDDA when VDDA < 2 V and be between 2 V and VDDA when VDDA ≥ 2 V. |
| 6 | VDD/VDDA | power_in | Main supply from 1.7 V to 3.6 V for the internal regulator, I/Os and analog blocks, with VDDA limits of 1.62 V (ADC and COMP), 1.8 V (DAC) and 2.4 V (VREFBUF) minimum. |
| 7 | VSS/VSSA | power_in | Ground reference for the digital and analog supply, which must be decoupled with ceramic capacitors placed as close as possible to the pin pair. |
| 8 | PF0-OSC_IN | bidirectional | 5 V tolerant GPIO (FT) that is also the HSE oscillator input OSC_IN and can be used as TIM14_CH1. |
| 9 | PF1-OSC_OUT | bidirectional | 5 V tolerant GPIO (FT) that is also the HSE oscillator output OSC_OUT and can be used as TIM15_CH1N or OSC_EN. |
| 10 | PF2-NRST | bidirectional | Reset pin with embedded weak pull-up (RST structure) when configured as reset, or a 5 V tolerant GPIO (FT) when configured as GPIO; it can also output MCO. |
| 11 | PA0 | bidirectional | Fast-mode-capable 5 V tolerant analog-switch I/O (FT_a) with ADC_IN0, COMP1_INM, WKUP1 and TAMP_IN2 functions. |
| 12 | PA1 | bidirectional | 5 V tolerant analog-switch I/O (FT_a) with ADC_IN1 and COMP1_INP as additional functions. |
| 13 | PA2 | bidirectional | 5 V tolerant analog-switch I/O (FT_a) with ADC_IN2, COMP2_INM and WKUP4 as additional functions. |
| 14 | PA3 | bidirectional | 5 V tolerant analog-switch I/O (FT_a) with ADC_IN3 and COMP2_INP as additional functions. |
| 15 | PA4 | bidirectional | 3.6 V tolerant analog-switch I/O (TT_a) with ADC_IN4, DAC_OUT1 and RTC_OUT2 as additional functions. |
| 16 | PA5 | bidirectional | 3.6 V tolerant analog-switch I/O (TT_a) with ADC_IN5 and DAC_OUT2 as additional functions. |
| 17 | PA6 | bidirectional | 5 V tolerant analog-switch I/O (FT_a) with ADC_IN6 as additional function and COMP1_OUT as alternate function. |
| 18 | PA7 | bidirectional | 5 V tolerant analog-switch I/O (FT_a) with ADC_IN7 as additional function and COMP2_OUT as alternate function. |
| 19 | PB0 | bidirectional | 5 V tolerant analog-switch I/O (FT_a) with ADC_IN8 as additional function and COMP1_OUT as alternate function. |
| 20 | PB1 | bidirectional | 5 V tolerant analog-switch I/O (FT_a) with COMP1_INM and ADC_IN9 as additional functions. |
| 21 | PB2 | bidirectional | 5 V tolerant analog-switch I/O (FT_a) with COMP1_INP and ADC_IN10 as additional functions. |
| 22 | PB10 | bidirectional | 5 V tolerant I/O with Fm+ and analog-switch capability (FT_fa), with ADC_IN11 as additional function. |
| 23 | PB11 | bidirectional | 5 V tolerant I/O with Fm+ and analog-switch capability (FT_fa), with ADC_IN15 as additional function. |
| 24 | PB12 | bidirectional | 5 V tolerant analog-switch I/O (FT_a) with ADC_IN16 as additional function. |
| 25 | PB13 | bidirectional | 5 V tolerant I/O with Fm+ capability (FT_f) that has SPI2_SCK, LPUART1_CTS and I2C2_SCL as alternate functions. |
| 26 | PB14 | bidirectional | 5 V tolerant I/O with Fm+ capability (FT_f) that has SPI2_MISO, UCPD1_FRSTX and I2C2_SDA as alternate functions. |
| 27 | PB15 | bidirectional | 5 V tolerant USB Type-C PD capable I/O (FT_c) that may show a pull-down at reset depending on PA10/PB0 level, which can be disabled by strobing UCPDx_STROBE during start-up. |
| 28 | PA8 | bidirectional | 5 V tolerant USB Type-C PD capable I/O (FT_c) with MCO and TIM1_CH1 alternate functions and UCPD1_CC1 as additional function. |
| 29 | PA9 | bidirectional | 5 V tolerant I/O with Fm+ and USB Type-C PD dead-battery function (FT_fd) that has USART1_TX, I2C1_SCL and MCO as alternate functions. |
| 30 | PC6 | bidirectional | 5 V tolerant I/O (FT) with UCPD1_FRSTX, TIM3_CH1 and TIM2_CH3 as alternate functions. |
| 31 | PC7 | bidirectional | 5 V tolerant I/O (FT) with UCPD2_FRSTX, TIM3_CH2 and TIM2_CH4 as alternate functions. |
| 32 | PA10 | bidirectional | 5 V tolerant Fm+ and USB Type-C PD dead-battery capable I/O (FT_fd) with USART1_RX, I2C1_SDA and TIM1_CH3 as alternate functions. |
| 33 | PA11 [PA9] | bidirectional | 5 V tolerant Fm+ capable I/O (FT_f) that can be remapped with PA9 using SYSCFG_CFGR1, with USART1_CTS, TIM1_CH4 and COMP1_OUT as alternate functions. |
| 34 | PA12 [PA10] | bidirectional | 5 V tolerant Fm+ capable I/O (FT_f) that can be remapped with PA10 using SYSCFG_CFGR1, with USART1_RTS_DE_CK, TIM1_ETR and COMP2_OUT as alternate functions. |
| 35 | PA13 | bidirectional | 5 V tolerant I/O (FT) that is configured as SWDIO at reset with an internal pull-up enabled. |
| 36 | PA14-BOOT0 | bidirectional | 5 V tolerant I/O (FT) that is configured as SWCLK at reset with an internal pull-down enabled and also serves as the BOOT0 boot selection pin. |
| 37 | PA15 | bidirectional | 5 V tolerant I/O (FT) with SPI1_NSS/I2S1_WS, USART2_RX and TIM2_CH1_ETR as alternate functions. |
| 38 | PD0 | bidirectional | 5 V tolerant USB Type-C PD capable I/O (FT_c) that may show a pull-down at reset depending on PD1 level, which can be disabled by strobing UCPDx_STROBE during start-up. |
| 39 | PD1 | bidirectional | 5 V tolerant I/O with USB Type-C PD dead-battery function (FT_d) with EVENTOUT, SPI2_SCK and TIM17_CH1 as alternate functions. |
| 40 | PD2 | bidirectional | 5 V tolerant USB Type-C PD capable I/O (FT_c) with USART3_RTS_DE_CK, TIM3_ETR and TIM1_CH1N as alternate functions. |
| 41 | PD3 | bidirectional | 5 V tolerant I/O with USB Type-C PD dead-battery function (FT_d) with USART2_CTS, SPI2_MISO and TIM1_CH2N as alternate functions. |
| 42 | PB3 | bidirectional | 5 V tolerant analog-switch I/O (FT_a) with SPI1_SCK/I2S1_CK, TIM1_CH2, TIM2_CH2 and USART1_RTS_DE_CK as alternate functions. |
| 43 | PB4 | bidirectional | 5 V tolerant analog-switch I/O (FT_a) with SPI1_MISO/I2S1_MCK, TIM3_CH1 and USART1_CTS as alternate functions and COMP2_INP as additional function. |
| 44 | PB5 | bidirectional | 5 V tolerant I/O (FT) with SPI1_MOSI/I2S1_SD, TIM3_CH2 and I2C1_SMBA as alternate functions and WKUP6 as additional function. |
| 45 | PB6 | bidirectional | 5 V tolerant Fm+ and analog-switch capable I/O (FT_fa) with USART1_TX, TIM1_CH3 and I2C1_SCL as alternate functions and COMP2_INP as additional function. |
| 46 | PB7 | bidirectional | 5 V tolerant Fm+ and analog-switch capable I/O (FT_fa) with USART1_RX, SPI2_MOSI and I2C1_SDA as alternate functions and PVD_IN as additional function. |
| 47 | PB8 | bidirectional | 5 V tolerant Fm+ capable I/O (FT_f) with CEC, SPI2_SCK, TIM16_CH1, USART3_TX and I2C1_SCL as alternate functions. |
| 48 | PB9 | bidirectional | 5 V tolerant Fm+ capable I/O (FT_f) with IR_OUT, UCPD2_FRSTX, TIM17_CH1, USART3_RX, SPI2_NSS and I2C1_SDA as alternate functions. |
| 49 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | UFQFPN-48(7x7) |
| Category | |
| Pins | 49 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Internal AHB clock frequency | fHCLK | 0 | | 64 | MHz | | 56 |
| Internal APB clock frequency | fPCLK | 0 | | 64 | MHz | | 56 |
| Standard operating voltage | VDD | 1.7 | | 3.6 | V | | 56 |
| Analog supply voltage | VDDA | 1.62 | | 3.6 | V | For ADC and COMP operation | 56 |
| Analog supply voltage | VDDA | 1.8 | | 3.6 | V | For DAC operation | 56 |
| Analog supply voltage | VDDA | 2.4 | | 3.6 | V | For VREFBUF operation | 56 |
| Backup operating voltage | VBAT | 1.55 | | 3.6 | V | | 56 |
| I/O input voltage (all except RST, TT_xx, FT_c) | VIN | -0.3 | | | V | Max is Min(VDD + 3.6, 5.5) | 56 |
| I/O input voltage RST | VIN | -0.3 | | | V | Max is VDD + 0.3 | 56 |
| I/O input voltage TT_xx | VIN | -0.3 | | | V | Max is VDDA + 0.3 | 56 |
| I/O input voltage FT_c | VIN | -0.3 | | 5 | V | | 56 |
| Ambient temperature suffix 7 | TA | -40 | | 105 | °C | Suffix 7 | 57 |
| Junction temperature suffix 7 | TJ | -40 | | 125 | °C | Suffix 7 | 57 |
| VDD slew rate falling, ULPEN=0 | tVDD | 10 | | | µs/V | VDD falling; ULPEN = 0 | 57 |
| VDD slew rate falling, ULPEN=1 | tVDD | 100 | | | ms/V | VDD falling; ULPEN = 1 | 57 |
| POR temporization | tRSTTEMPO | | 250 | 400 | µs | VDD rising | 57 |
| Power-on reset threshold | VPOR | 1.62 | 1.66 | 1.7 | V | | 57 |
| Power-down reset threshold | VPDR | 1.6 | 1.64 | 1.69 | V | | 57 |
| Brownout reset threshold 1, rising | VBOR1 | 2.05 | 2.1 | 2.18 | V | VDD rising | 57 |
| Brownout reset threshold 1, falling | VBOR1 | 1.95 | 2 | 2.08 | V | VDD falling | 57 |
| Brownout reset threshold 4, rising | VBOR4 | 2.8 | 2.91 | 3 | V | VDD rising | 57 |
| Brownout reset threshold 4, falling | VBOR4 | 2.7 | 2.81 | 2.9 | V | VDD falling | 57 |
| Internal reference voltage | VREFINT | 1.182 | 1.212 | 1.232 | V | -40°C < TJ < 130°C | 58 |
| HSI16 frequency | fHSI16 | 15.88 | | 16.08 | MHz | VDD=3.0 V, TA=30 °C | 74 |
| HSI16 frequency drift over temperature | ΔTemp(HSI16) | -1 | | 1 | % | TA= 0 to 85 °C | 74 |
| HSI16 frequency drift over temperature | ΔTemp(HSI16) | -2 | | 1.5 | % | TA= -40 to 125 °C | 74 |
| HSI16 frequency drift over VDD | ΔVDD(HSI16) | -0.1 | | 0.05 | % | VDD=1.62 V to 3.6 V | 74 |
| HSI16 duty cycle | DHSI16 | 45 | | 55 | % | | 74 |
| LSI frequency | fLSI | 31.04 | | 32.96 | kHz | VDD = 3.0 V, TA = 30 °C | 75 |
| LSI frequency | fLSI | 29.5 | | 34 | kHz | VDD = 1.62 V to 3.6 V, TA = -40 to 125 °C | 75 |
| High-speed external user clock frequency, Range 1 | fHSE_ext | 8 | | 48 | MHz | Voltage scaling Range 1 | 71 |
| HSE oscillator frequency | fOSC_IN | 4 | | 48 | MHz | | 71 |
| PLL input clock frequency | fPLL_IN | 2.66 | | 16 | MHz | | 76 |
| PLL input clock duty cycle | DPLL_IN | 45 | | 55 | % | | 76 |
| Endurance | NEND | 10 | | | kcycles | TA = -40 to +105 °C | 77 |
| Data retention | tRET | 30 | | | Years | 1 kcycle at TA = 85 °C | 77 |
| Data retention | tRET | 15 | | | Years | 1 kcycle at TA = 105 °C | 77 |
| Data retention | tRET | 7 | | | Years | 1 kcycle at TA = 125 °C | 77 |
| Voltage on VDD external supply | VDD | -0.3 | | 4 | V | | 55 |
| Voltage on VBAT external supply | VBAT | -0.3 | | 4 | V | | 55 |
| External voltage on VREF+ pin | VREF+ | -0.3 | | | V | Max is Min(VDD + 0.4, 4.0) | 55 |
| Input voltage on FT_xx pins except FT_c | VIN | -0.3 | | | V | Max is VDD + 4.0 | 55 |
| Input voltage on FT_c pins | VIN | -0.3 | | 5.5 | V | | 55 |
| Input voltage on any other pin | VIN | -0.3 | | 4 | V | | 55 |
| Current into VDD/VDDA power pin (source) | IVDD/VDDA | | | 100 | mA | | 55 |
| Current out of VSS/VSSA ground pin (sink) | IVSS/VSSA | | | 100 | mA | | 55 |
| Output current sunk by any I/O and control pin except FT_f | IIO(PIN) | | | 15 | mA | | 55 |
| Output current sunk by any FT_f pin | IIO(PIN) | | | 20 | mA | | 55 |
| Output current sourced by any I/O and control pin | IIO(PIN) | | | 15 | mA | | 55 |
| Total output current sunk by sum of all I/Os and control pins | ΣIIO(PIN) | | | 80 | mA | | 56 |
| Total output current sourced by sum of all I/Os and control pins | ΣIIO(PIN) | | | 80 | mA | | 56 |
| Total injected current (sum of all I/Os and control pins) | ∑/IINJ(PIN)/ | | | 25 | mA | | 56 |
| Storage temperature range | TSTG | -65 | | 150 | °C | | 56 |
| Maximum junction temperature | TJ | | | 150 | °C | | 56 |
## CAD (KiCad official)
- Symbol: `STM32G071C8U7TR`
- Footprint: `Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm`
- 3D model: UFQFPN-48(7x7) (KiCad packages3D, STEP)
- 3D model files: `stm32g071c8u7tr-etched.step` / `stm32g071c8u7tr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm32g071c8u7tr.step` / `stm32g071c8u7tr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [STMicroelectronics datasheet](https://www.st.com/resource/en/datasheet/stm32g071c8u7tr.pdf) (143 pp, sha256 `a83ee1377da65257`, retrieved 2026-10-28, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/stm32g071c8u7tr-datasheet.pdf)