main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers stm32g071c8u7tr: viewers · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
stm32g071c8u7tr-etched.glb Publish 0.1.0 · Ray
stm32g071c8u7tr-etched.step stm32g071c8u7tr: factory component page (tier=mfr) · Ray
stm32g071c8u7tr-hero.glb stm32g071c8u7tr: hero GLB from the etched model (keeps the MPN mark) · Ray
stm32g071c8u7tr-hero.overlay.json Publish 0.1.0 · Ray
stm32g071c8u7tr.glb Publish 0.1.0 · Ray
stm32g071c8u7tr.kicad_mod Publish 0.1.0 · Ray
stm32g071c8u7tr.kicad_sym Publish 0.1.0 · Ray
stm32g071c8u7tr.lbr Publish 0.1.0 · Ray
stm32g071c8u7tr.step Publish 0.1.0 · Ray

STM32G071C8U7TR

STMicroelectronics · IC · UFQFPN-48(7x7)

STM32G071C8U7TR from STMicroelectronics, in a UFQFPN-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PC13 bidirectional 5 V tolerant GPIO (FT) that is supplied through the power switch and sinks only 3 mA, so it must not source current and output speed is limited to 2 MHz at 30 pF; also TAMP_IN1, RTC_TS, RTC_OUT1 and WKUP2.
2 PC14-OSC32_IN bidirectional 5 V tolerant GPIO (FT) on the power-switch domain, with the same 3 mA sink and 2 MHz output limits as PC13, that is used as the 32.768 kHz LSE oscillator input OSC32_IN.
3 PC15-OSC32_OUT bidirectional 5 V tolerant GPIO (FT) on the power-switch domain, with the same 3 mA sink and 2 MHz output limits as PC13, that is used as the 32.768 kHz LSE oscillator output OSC32_OUT.
4 VBAT power_in Power supply input from 1.55 V to 3.6 V for the RTC, TAMP, LSE oscillator and backup registers when VDD is not present.
5 VREF+ power_in Analog reference voltage input, or output of the internal voltage reference buffer when enabled; it must equal VDDA when VDDA < 2 V and be between 2 V and VDDA when VDDA ≥ 2 V.
6 VDD/VDDA power_in Main supply from 1.7 V to 3.6 V for the internal regulator, I/Os and analog blocks, with VDDA limits of 1.62 V (ADC and COMP), 1.8 V (DAC) and 2.4 V (VREFBUF) minimum.
7 VSS/VSSA power_in Ground reference for the digital and analog supply, which must be decoupled with ceramic capacitors placed as close as possible to the pin pair.
8 PF0-OSC_IN bidirectional 5 V tolerant GPIO (FT) that is also the HSE oscillator input OSC_IN and can be used as TIM14_CH1.
9 PF1-OSC_OUT bidirectional 5 V tolerant GPIO (FT) that is also the HSE oscillator output OSC_OUT and can be used as TIM15_CH1N or OSC_EN.
10 PF2-NRST bidirectional Reset pin with embedded weak pull-up (RST structure) when configured as reset, or a 5 V tolerant GPIO (FT) when configured as GPIO; it can also output MCO.
11 PA0 bidirectional Fast-mode-capable 5 V tolerant analog-switch I/O (FT_a) with ADC_IN0, COMP1_INM, WKUP1 and TAMP_IN2 functions.
12 PA1 bidirectional 5 V tolerant analog-switch I/O (FT_a) with ADC_IN1 and COMP1_INP as additional functions.
13 PA2 bidirectional 5 V tolerant analog-switch I/O (FT_a) with ADC_IN2, COMP2_INM and WKUP4 as additional functions.
14 PA3 bidirectional 5 V tolerant analog-switch I/O (FT_a) with ADC_IN3 and COMP2_INP as additional functions.
15 PA4 bidirectional 3.6 V tolerant analog-switch I/O (TT_a) with ADC_IN4, DAC_OUT1 and RTC_OUT2 as additional functions.
16 PA5 bidirectional 3.6 V tolerant analog-switch I/O (TT_a) with ADC_IN5 and DAC_OUT2 as additional functions.
17 PA6 bidirectional 5 V tolerant analog-switch I/O (FT_a) with ADC_IN6 as additional function and COMP1_OUT as alternate function.
18 PA7 bidirectional 5 V tolerant analog-switch I/O (FT_a) with ADC_IN7 as additional function and COMP2_OUT as alternate function.
19 PB0 bidirectional 5 V tolerant analog-switch I/O (FT_a) with ADC_IN8 as additional function and COMP1_OUT as alternate function.
20 PB1 bidirectional 5 V tolerant analog-switch I/O (FT_a) with COMP1_INM and ADC_IN9 as additional functions.
21 PB2 bidirectional 5 V tolerant analog-switch I/O (FT_a) with COMP1_INP and ADC_IN10 as additional functions.
22 PB10 bidirectional 5 V tolerant I/O with Fm+ and analog-switch capability (FT_fa), with ADC_IN11 as additional function.
23 PB11 bidirectional 5 V tolerant I/O with Fm+ and analog-switch capability (FT_fa), with ADC_IN15 as additional function.
24 PB12 bidirectional 5 V tolerant analog-switch I/O (FT_a) with ADC_IN16 as additional function.
25 PB13 bidirectional 5 V tolerant I/O with Fm+ capability (FT_f) that has SPI2_SCK, LPUART1_CTS and I2C2_SCL as alternate functions.
26 PB14 bidirectional 5 V tolerant I/O with Fm+ capability (FT_f) that has SPI2_MISO, UCPD1_FRSTX and I2C2_SDA as alternate functions.
27 PB15 bidirectional 5 V tolerant USB Type-C PD capable I/O (FT_c) that may show a pull-down at reset depending on PA10/PB0 level, which can be disabled by strobing UCPDx_STROBE during start-up.
28 PA8 bidirectional 5 V tolerant USB Type-C PD capable I/O (FT_c) with MCO and TIM1_CH1 alternate functions and UCPD1_CC1 as additional function.
29 PA9 bidirectional 5 V tolerant I/O with Fm+ and USB Type-C PD dead-battery function (FT_fd) that has USART1_TX, I2C1_SCL and MCO as alternate functions.
30 PC6 bidirectional 5 V tolerant I/O (FT) with UCPD1_FRSTX, TIM3_CH1 and TIM2_CH3 as alternate functions.
31 PC7 bidirectional 5 V tolerant I/O (FT) with UCPD2_FRSTX, TIM3_CH2 and TIM2_CH4 as alternate functions.
32 PA10 bidirectional 5 V tolerant Fm+ and USB Type-C PD dead-battery capable I/O (FT_fd) with USART1_RX, I2C1_SDA and TIM1_CH3 as alternate functions.
33 PA11 [PA9] bidirectional 5 V tolerant Fm+ capable I/O (FT_f) that can be remapped with PA9 using SYSCFG_CFGR1, with USART1_CTS, TIM1_CH4 and COMP1_OUT as alternate functions.
34 PA12 [PA10] bidirectional 5 V tolerant Fm+ capable I/O (FT_f) that can be remapped with PA10 using SYSCFG_CFGR1, with USART1_RTS_DE_CK, TIM1_ETR and COMP2_OUT as alternate functions.
35 PA13 bidirectional 5 V tolerant I/O (FT) that is configured as SWDIO at reset with an internal pull-up enabled.
36 PA14-BOOT0 bidirectional 5 V tolerant I/O (FT) that is configured as SWCLK at reset with an internal pull-down enabled and also serves as the BOOT0 boot selection pin.
37 PA15 bidirectional 5 V tolerant I/O (FT) with SPI1_NSS/I2S1_WS, USART2_RX and TIM2_CH1_ETR as alternate functions.
38 PD0 bidirectional 5 V tolerant USB Type-C PD capable I/O (FT_c) that may show a pull-down at reset depending on PD1 level, which can be disabled by strobing UCPDx_STROBE during start-up.
39 PD1 bidirectional 5 V tolerant I/O with USB Type-C PD dead-battery function (FT_d) with EVENTOUT, SPI2_SCK and TIM17_CH1 as alternate functions.
40 PD2 bidirectional 5 V tolerant USB Type-C PD capable I/O (FT_c) with USART3_RTS_DE_CK, TIM3_ETR and TIM1_CH1N as alternate functions.
41 PD3 bidirectional 5 V tolerant I/O with USB Type-C PD dead-battery function (FT_d) with USART2_CTS, SPI2_MISO and TIM1_CH2N as alternate functions.
42 PB3 bidirectional 5 V tolerant analog-switch I/O (FT_a) with SPI1_SCK/I2S1_CK, TIM1_CH2, TIM2_CH2 and USART1_RTS_DE_CK as alternate functions.
43 PB4 bidirectional 5 V tolerant analog-switch I/O (FT_a) with SPI1_MISO/I2S1_MCK, TIM3_CH1 and USART1_CTS as alternate functions and COMP2_INP as additional function.
44 PB5 bidirectional 5 V tolerant I/O (FT) with SPI1_MOSI/I2S1_SD, TIM3_CH2 and I2C1_SMBA as alternate functions and WKUP6 as additional function.
45 PB6 bidirectional 5 V tolerant Fm+ and analog-switch capable I/O (FT_fa) with USART1_TX, TIM1_CH3 and I2C1_SCL as alternate functions and COMP2_INP as additional function.
46 PB7 bidirectional 5 V tolerant Fm+ and analog-switch capable I/O (FT_fa) with USART1_RX, SPI2_MOSI and I2C1_SDA as alternate functions and PVD_IN as additional function.
47 PB8 bidirectional 5 V tolerant Fm+ capable I/O (FT_f) with CEC, SPI2_SCK, TIM16_CH1, USART3_TX and I2C1_SCL as alternate functions.
48 PB9 bidirectional 5 V tolerant Fm+ capable I/O (FT_f) with IR_OUT, UCPD2_FRSTX, TIM17_CH1, USART3_RX, SPI2_NSS and I2C1_SDA as alternate functions.
49 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package UFQFPN-48(7x7)
Category
Pins 49

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Internal AHB clock frequency fHCLK 0 64 MHz 56
Internal APB clock frequency fPCLK 0 64 MHz 56
Standard operating voltage VDD 1.7 3.6 V 56
Analog supply voltage VDDA 1.62 3.6 V For ADC and COMP operation 56
Analog supply voltage VDDA 1.8 3.6 V For DAC operation 56
Analog supply voltage VDDA 2.4 3.6 V For VREFBUF operation 56
Backup operating voltage VBAT 1.55 3.6 V 56
I/O input voltage (all except RST, TT_xx, FT_c) VIN -0.3 V Max is Min(VDD + 3.6, 5.5) 56
I/O input voltage RST VIN -0.3 V Max is VDD + 0.3 56
I/O input voltage TT_xx VIN -0.3 V Max is VDDA + 0.3 56
I/O input voltage FT_c VIN -0.3 5 V 56
Ambient temperature suffix 7 TA -40 105 °C Suffix 7 57
Junction temperature suffix 7 TJ -40 125 °C Suffix 7 57
VDD slew rate falling, ULPEN=0 tVDD 10 µs/V VDD falling; ULPEN = 0 57
VDD slew rate falling, ULPEN=1 tVDD 100 ms/V VDD falling; ULPEN = 1 57
POR temporization tRSTTEMPO 250 400 µs VDD rising 57
Power-on reset threshold VPOR 1.62 1.66 1.7 V 57
Power-down reset threshold VPDR 1.6 1.64 1.69 V 57
Brownout reset threshold 1, rising VBOR1 2.05 2.1 2.18 V VDD rising 57
Brownout reset threshold 1, falling VBOR1 1.95 2 2.08 V VDD falling 57
Brownout reset threshold 4, rising VBOR4 2.8 2.91 3 V VDD rising 57
Brownout reset threshold 4, falling VBOR4 2.7 2.81 2.9 V VDD falling 57
Internal reference voltage VREFINT 1.182 1.212 1.232 V -40°C < TJ < 130°C 58
HSI16 frequency fHSI16 15.88 16.08 MHz VDD=3.0 V, TA=30 °C 74
HSI16 frequency drift over temperature ΔTemp(HSI16) -1 1 % TA= 0 to 85 °C 74
HSI16 frequency drift over temperature ΔTemp(HSI16) -2 1.5 % TA= -40 to 125 °C 74
HSI16 frequency drift over VDD ΔVDD(HSI16) -0.1 0.05 % VDD=1.62 V to 3.6 V 74
HSI16 duty cycle DHSI16 45 55 % 74
LSI frequency fLSI 31.04 32.96 kHz VDD = 3.0 V, TA = 30 °C 75
LSI frequency fLSI 29.5 34 kHz VDD = 1.62 V to 3.6 V, TA = -40 to 125 °C 75
High-speed external user clock frequency, Range 1 fHSE_ext 8 48 MHz Voltage scaling Range 1 71
HSE oscillator frequency fOSC_IN 4 48 MHz 71
PLL input clock frequency fPLL_IN 2.66 16 MHz 76
PLL input clock duty cycle DPLL_IN 45 55 % 76
Endurance NEND 10 kcycles TA = -40 to +105 °C 77
Data retention tRET 30 Years 1 kcycle at TA = 85 °C 77
Data retention tRET 15 Years 1 kcycle at TA = 105 °C 77
Data retention tRET 7 Years 1 kcycle at TA = 125 °C 77
Voltage on VDD external supply VDD -0.3 4 V 55
Voltage on VBAT external supply VBAT -0.3 4 V 55
External voltage on VREF+ pin VREF+ -0.3 V Max is Min(VDD + 0.4, 4.0) 55
Input voltage on FT_xx pins except FT_c VIN -0.3 V Max is VDD + 4.0 55
Input voltage on FT_c pins VIN -0.3 5.5 V 55
Input voltage on any other pin VIN -0.3 4 V 55
Current into VDD/VDDA power pin (source) IVDD/VDDA 100 mA 55
Current out of VSS/VSSA ground pin (sink) IVSS/VSSA 100 mA 55
Output current sunk by any I/O and control pin except FT_f IIO(PIN) 15 mA 55
Output current sunk by any FT_f pin IIO(PIN) 20 mA 55
Output current sourced by any I/O and control pin IIO(PIN) 15 mA 55
Total output current sunk by sum of all I/Os and control pins ΣIIO(PIN) 80 mA 56
Total output current sourced by sum of all I/Os and control pins ΣIIO(PIN) 80 mA 56
Total injected current (sum of all I/Os and control pins) ∑/IINJ(PIN)/ 25 mA 56
Storage temperature range TSTG -65 150 °C 56
Maximum junction temperature TJ 150 °C 56

CAD (KiCad official)

  • Symbol: STM32G071C8U7TR
  • Footprint: Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm
  • 3D model: UFQFPN-48(7x7) (KiCad packages3D, STEP)
  • 3D model files: stm32g071c8u7tr-etched.step / stm32g071c8u7tr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm32g071c8u7tr.step / stm32g071c8u7tr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (143 pp, sha256 a83ee1377da65257, retrieved 2026-10-28, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF