component
STM32F765VIT6
Public Made by Adomby adom
STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-100(14x14). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownSTM32F765VIT6
STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · LQFP-100(14x14)
STM32F765VIT6 from STMicroelectronics, in a LQFP-100(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PE2 | output | TRACECLK/SPI4_SCK/SAI1_MCLK_A/QUADSPI_BK1_IO2/ETH_MII_TXD3/FMC_A23/EVENTOUT I/O pad with 5V tolerance |
| 2 | PE3 | output | TRACED0/SAI1_SD_B/FMC_A19/EVENTOUT I/O pad with 5V tolerance |
| 3 | PE4 | output | TRACED1/TIM9_CH1/SPI4_NSS/SAI1_FS_A/DFSDM1_DATIN3/FMC_A20/DCMI_D4/LCD_B0/EVENTOUT I/O pad with 5V tolerance |
| 4 | PE5 | output | TRACED2/TIM9_CH2/SPI4_MISO/SAI1_SCK_A/DFSDM1_CKIN3/FMC_A21/DCMI_D6/LCD_G0/EVENTOUT I/O pad with 5V tolerance |
| 5 | PE6 | output | TRACED3/TIM1_BKIN2/SPI4_MOSI/SAI1_SD_A/SAI2_MCLK_B/FMC_A22/DCMI_D7/LCD_G1/EVENTOUT I/O pad with 5V tolerance |
| 6 | VBAT | power_in | Backup battery supply pin for RTC and backup registers |
| 7 | PC13 | output | RTC_TAMP1/RTC_TS/RTC_OUT/WKUP4/EVENTOUT I/O pad with 5V tolerance and limited output capability (3mA max, 2MHz) |
| 8 | PC14-OSC32_IN | output | OSC32_IN/EVENTOUT I/O for 32kHz oscillator input, 5V tolerant in digital mode |
| 9 | PC15-OSC32_OUT | output | OSC32_OUT/EVENTOUT I/O for 32kHz oscillator output, 5V tolerant in digital mode |
| 10 | VSS | power_in | Ground connection point |
| 11 | VDD | power_in | Main power supply 1.7V to 3.6V |
| 12 | PH0-OSC_IN | output | OSC_IN/EVENTOUT crystal oscillator input, 5V tolerant in digital mode |
| 13 | PH1-OSC_OUT | output | OSC_OUT/EVENTOUT crystal oscillator output, 5V tolerant in digital mode |
| 14 | NRST | bidirectional | Bidirectional reset pin with weak internal pull-up resistor |
| 15 | PC0 | output | DFSDM1_CKIN0/DFSDM1_DATIN4/SAI2_FS_B/OTG_HS_ULPI_STP/FMC_SDNWE/LCD_R5/EVENTOUT with ADC1/2/3_IN10 |
| 16 | PC1 | output | TRACED0/DFSDM1_DATIN0/SPI2_MOSI/SAI1_SD_A/ETH_MDC/MDIOS_MDC/EVENTOUT with ADC1/2/3_IN11 |
| 17 | PC2 | output | DFSDM1_CKIN1/SPI2_MISO/OTG_HS_ULPI_DIR/ETH_MII_TXD2/FMC_SDNE0/EVENTOUT with ADC1/2/3_IN12 |
| 18 | PC3 | output | DFSDM1_DATIN1/SPI2_MOSI/OTG_HS_ULPI_NXT/ETH_MII_TX_CLK/FMC_SDCKE0/EVENTOUT with ADC1/2/3_IN13 |
| 19 | VSSA | power_in | Analog ground connection |
| 20 | VREF+ | power_in | ADC reference voltage positive |
| 21 | VDDA | power_in | Analog power supply 1.7V to 3.6V |
| 22 | PA0-WKUP | output | TIM2_CH1/TIM5_CH1/TIM8_ETR/USART2_CTS/UART4_TX/SAI2_SD_B/ETH_MII_CRS/EVENTOUT with WKUP1 and ADC1/2/3_IN0 |
| 23 | PA1 | output | TIM2_CH2/TIM5_CH2/USART2_RTS/UART4_RX/QUADSPI_BK1_IO3/SAI2_MCLK_B/ETH_MII_RX_CLK/LCD_R2/EVENTOUT with ADC1/2/3_IN1 |
| 24 | PA2 | output | TIM2_CH3/TIM5_CH3/TIM9_CH1/USART2_TX/SAI2_SCK_B/ETH_MDIO/MDIOS_MDIO/LCD_R1/EVENTOUT with WKUP2 and ADC1/2/3_IN2 |
| 25 | PA3 | output | TIM2_CH4/TIM5_CH4/TIM9_CH2/USART2_RX/LCD_B2/OTG_HS_ULPI_D0/ETH_MII_COL/LCD_B5/EVENTOUT with ADC1/2/3_IN3 |
| 26 | VSS | power_in | Ground connection point |
| 27 | VDD | power_in | Main power supply 1.7V to 3.6V |
| 28 | PA4 | output | SPI1_NSS/SPI3_NSS/USART2_CK/SPI6_NSS/OTG_HS_SOF/DCMI_HSYNC/LCD_VSYNC/EVENTOUT with DAC_OUT1 and ADC1/2/3_IN4 |
| 29 | PA5 | output | SPI1_SCK/SPI6_SCK/OTG_HS_ULPI_CK/LCD_R4/EVENTOUT with DAC_OUT2 and ADC1/2/3_IN5 |
| 30 | PA6 | output | TIM1_BKIN/TIM3_CH1/TIM8_BKIN/SPI1_MISO/SPI6_MISO/TIM13_CH1/MDIOS_MDC/DCMI_PIXCLK/LCD_G2/EVENTOUT with ADC1/2_IN6 |
| 31 | PA7 | output | TIM1_CH1N/TIM3_CH2/TIM8_CH1N/SPI1_MOSI/SPI6_MOSI/TIM14_CH1/ETH_MII_RX_DV/FMC_SDNWE/EVENTOUT with ADC1/2_IN7 |
| 32 | PC4 | output | DFSDM1_CKIN2/I2S1_MCK/SPDIF_RX2/ETH_MII_RXD0/FMC_SDNE0/EVENTOUT with ADC1/2_IN14 |
| 33 | PC5 | output | DFSDM1_DATIN2/SPDIF_RX3/ETH_MII_RXD1/FMC_SDCKE0/EVENTOUT with ADC1/2_IN15 |
| 34 | PB0 | output | TIM1_CH2N/TIM3_CH3/TIM8_CH2N/DFSDM1_CKOUT/UART4_CTS/LCD_R3/OTG_HS_ULPI_D1/ETH_MII_RXD2/LCD_G1/EVENTOUT with ADC1/2_IN8 |
| 35 | PB1 | output | TIM1_CH3N/TIM3_CH4/TIM8_CH3N/DFSDM1_DATIN1/LCD_R6/OTG_HS_ULPI_D2/ETH_MII_RXD3/LCD_G0/EVENTOUT with ADC1/2_IN9 |
| 36 | PB2 | output | SAI1_SD_A/SPI3_MOSI/QUADSPI_CLK/DFSDM1_CKIN1/EVENTOUT |
| 37 | PE7 | output | TIM1_ETR/DFSDM1_DATIN2/UART7_RX/QUADSPI_BK2_IO0/FMC_D4/EVENTOUT |
| 38 | PE8 | output | TIM1_CH1N/DFSDM1_CKIN2/UART7_TX/QUADSPI_BK2_IO1/FMC_D5/EVENTOUT |
| 39 | PE9 | output | TIM1_CH1/DFSDM1_CKOUT/UART7_RTS/QUADSPI_BK2_IO2/FMC_D6/EVENTOUT |
| 40 | PE10 | output | TIM1_CH2N/DFSDM1_DATIN4/UART7_CTS/QUADSPI_BK2_IO3/FMC_D7/EVENTOUT |
| 41 | PE11 | output | TIM1_CH2/SPI4_NSS/DFSDM1_CKIN4/SAI2_SD_B/FMC_D8/LCD_G3/EVENTOUT |
| 42 | PE12 | output | TIM1_CH3N/SPI4_SCK/DFSDM1_DATIN5/SAI2_SCK_B/FMC_D9/LCD_B4/EVENTOUT |
| 43 | PE13 | output | TIM1_CH3/SPI4_MISO/DFSDM1_CKIN5/SAI2_FS_B/FMC_D10/LCD_DE/EVENTOUT |
| 44 | PE14 | output | TIM1_CH4/SPI4_MOSI/SAI2_MCLK_B/FMC_D11/LCD_CLK/EVENTOUT |
| 45 | PE15 | output | TIM1_BKIN/FMC_D12/LCD_R7/EVENTOUT |
| 46 | PB10 | output | TIM2_CH3/I2C2_SCL/SPI2_SCK/DFSDM1_DATIN7/USART3_TX/QUADSPI_BK1_NCS/OTG_HS_ULPI_D3/ETH_MII_RX_ER/LCD_G4/EVENTOUT |
| 47 | PB11 | output | TIM2_CH4/I2C2_SDA/DFSDM1_CKIN7/USART3_RX/OTG_HS_ULPI_D4/ETH_MII_TX_EN/DSI_TE/LCD_G5/EVENTOUT |
| 48 | VCAP_1 | power_in | Voltage regulator decoupling capacitor connection |
| 49 | VSS | power_in | Ground connection point |
| 50 | VDD | power_in | Main power supply 1.7V to 3.6V |
| 51 | PB12 | output | TIM1_BKIN/I2C2_SMBA/SPI2_NSS/DFSDM1_DATIN1/USART3_CK/UART5_RX/CAN2_RX/OTG_HS_ULPI_D5/ETH_MII_TXD0/OTG_HS_ID/EVENTOUT |
| 52 | PB13 | output | TIM1_CH1N/SPI2_SCK/DFSDM1_CKIN1/USART3_CTS/UART5_TX/CAN2_TX/OTG_HS_ULPI_D6/ETH_MII_TXD1/EVENTOUT with OTG_HS_VBUS |
| 53 | PB14 | output | TIM1_CH2N/TIM8_CH2N/USART1_TX/SPI2_MISO/DFSDM1_DATIN2/USART3_RTS/UART4_RTS/TIM12_CH1/SDMMC2_D0/OTG_HS_DM/EVENTOUT |
| 54 | PB15 | output | RTC_REFIN/TIM1_CH3N/TIM8_CH3N/USART1_RX/SPI2_MOSI/DFSDM1_CKIN2/UART4_CTS/TIM12_CH2/SDMMC2_D1/OTG_HS_DP/EVENTOUT |
| 55 | PD8 | output | DFSDM1_CKIN3/USART3_TX/SPDIF_RX1/FMC_D13/EVENTOUT |
| 56 | PD9 | output | DFSDM1_DATIN3/USART3_RX/FMC_D14/EVENTOUT |
| 57 | PD10 | output | DFSDM1_CKOUT/USART3_CK/FMC_D15/LCD_B3/EVENTOUT |
| 58 | PD11 | output | I2C4_SMBA/USART3_CTS/QUADSPI_BK1_IO0/SAI2_SD_A/FMC_A16/EVENTOUT |
| 59 | PD12 | output | TIM4_CH1/LPTIM1_IN1/I2C4_SCL/USART3_RTS/QUADSPI_BK1_IO1/SAI2_FS_A/FMC_A17/EVENTOUT |
| 60 | PD13 | output | TIM4_CH2/LPTIM1_OUT/I2C4_SDA/QUADSPI_BK1_IO3/SAI2_SCK_A/FMC_A18/EVENTOUT |
| 61 | PD14 | output | TIM4_CH3/UART8_CTS/FMC_D0/EVENTOUT |
| 62 | PD15 | output | TIM4_CH4/UART8_RTS/FMC_D1/EVENTOUT |
| 63 | PC6 | output | TIM3_CH1/TIM8_CH1/I2S2_MCK/DFSDM1_CKIN3/USART6_TX/FMC_NWAIT/SDMMC2_D6/SDMMC1_D6/DCMI_D0/LCD_HSYNC/EVENTOUT |
| 64 | PC7 | output | TIM3_CH2/TIM8_CH2/I2S3_MCK/DFSDM1_DATIN3/USART6_RX/FMC_NE1/SDMMC2_D7/SDMMC1_D7/DCMI_D1/LCD_G6/EVENTOUT |
| 65 | PC8 | output | TRACED1/TIM3_CH3/TIM8_CH3/UART5_RTS/USART6_CK/FMC_NE2/SDMMC1_D0/DCMI_D2/EVENTOUT |
| 66 | PC9 | output | MCO2/TIM3_CH4/TIM8_CH4/I2C3_SDA/I2S_CKIN/UART5_CTS/QUADSPI_BK1_IO0/LCD_G3/SDMMC1_D1/DCMI_D3/LCD_B2/EVENTOUT |
| 67 | PA8 | output | MCO1/TIM1_CH1/TIM8_BKIN2/I2C3_SCL/USART1_CK/OTG_FS_SOF/CAN3_RX/UART7_RX/LCD_B3/LCD_R6/EVENTOUT |
| 68 | PA9 | output | TIM1_CH2/I2C3_SMBA/SPI2_SCK/USART1_TX/DCMI_D0/LCD_R5/EVENTOUT with OTG_FS_VBUS |
| 69 | PA10 | output | TIM1_CH3/USART1_RX/LCD_B4/OTG_FS_ID/MDIOS_MDIO/DCMI_D1/LCD_B1/EVENTOUT |
| 70 | PA11 | output | TIM1_CH4/SPI2_NSS/UART4_RX/USART1_CTS/CAN1_RX/OTG_FS_DM/LCD_R4/EVENTOUT |
| 71 | PA12 | output | TIM1_ETR/SPI2_SCK/UART4_TX/USART1_RTS/SAI2_FS_B/CAN1_TX/OTG_FS_DP/LCD_R5/EVENTOUT |
| 72 | PA13(JTMS-SWDIO) | output | JTMS-SWDIO Serial Wire/JTAG debug interface data line |
| 73 | VCAP_2 | power_in | Voltage regulator decoupling capacitor connection |
| 74 | VSS | power_in | Ground connection point |
| 75 | VDD | power_in | Main power supply 1.7V to 3.6V |
| 76 | PA14(JTCK-SWCLK) | output | JTCK-SWCLK Serial Wire/JTAG debug interface clock line |
| 77 | PA15(JTDI) | output | JTDI JTAG test data input, TIM2_CH1/HDMI_CEC/SPI1_NSS/SPI3_NSS/SPI6_NSS/UART4_RTS/CAN3_TX/UART7_TX/EVENTOUT |
| 78 | PC10 | output | DFSDM1_CKIN5/SPI3_SCK/USART3_TX/UART4_TX/QUADSPI_BK1_IO1/SDMMC1_D2/DCMI_D8/LCD_R2/EVENTOUT |
| 79 | PC11 | output | DFSDM1_DATIN5/SPI3_MISO/USART3_RX/UART4_RX/QUADSPI_BK2_NCS/SDMMC1_D3/DCMI_D4/EVENTOUT |
| 80 | PC12 | output | TRACED3/SPI3_MOSI/USART3_CK/UART5_TX/SDMMC1_CK/DCMI_D9/EVENTOUT |
| 81 | PD0 | output | DFSDM1_CKIN6/DFSDM1_DATIN7/UART4_RX/CAN1_RX/FMC_D2/EVENTOUT |
| 82 | PD1 | output | DFSDM1_DATIN6/DFSDM1_CKIN7/UART4_TX/CAN1_TX/FMC_D3/EVENTOUT |
| 83 | PD2 | output | TRACED2/TIM3_ETR/UART5_RX/SDMMC1_CMD/DCMI_D11/EVENTOUT |
| 84 | PD3 | output | DFSDM1_CKOUT/SPI2_SCK/DFSDM1_DATIN0/USART2_CTS/FMC_CLK/DCMI_D5/LCD_G7/EVENTOUT |
| 85 | PD4 | output | DFSDM1_CKIN0/USART2_RTS/FMC_NOE/EVENTOUT |
| 86 | PD5 | output | USART2_TX/FMC_NWE/EVENTOUT |
| 87 | PD6 | output | DFSDM1_CKIN4/SPI3_MOSI/SAI1_SD_A/USART2_RX/DFSDM1_DATIN1/SDMMC2_CK/FMC_NWAIT/DCMI_D10/LCD_B2/EVENTOUT |
| 88 | PD7 | output | DFSDM1_DATIN4/SPI1_MOSI/DFSDM1_CKIN1/USART2_CK/SPDIF_RX0/SDMMC2_CMD/FMC_NE1/EVENTOUT |
| 89 | PB3(JTDO/TRACESWO) | output | JTDO/TRACESWO TIM2_CH2/SPI1_SCK/SPI3_SCK/SPI6_SCK/SDMMC2_D2/CAN3_RX/UART7_RX/EVENTOUT |
| 90 | PB4(NJTRST) | output | NJTRST TIM3_CH1/SPI1_MISO/SPI3_MISO/SPI2_NSS/SPI6_MISO/SDMMC2_D3/CAN3_TX/UART7_TX/EVENTOUT |
| 91 | PB5 | output | UART5_RX/TIM3_CH2/I2C1_SMBA/SPI1_MOSI/SPI3_MOSI/SPI6_MOSI/CAN2_RX/OTG_HS_ULPI_D7/ETH_PPS_OUT/FMC_SDCKE1/DCMI_D10/LCD_G7/EVENTOUT |
| 92 | PB6 | output | UART5_TX/TIM4_CH1/HDMI_CEC/I2C1_SCL/DFSDM1_DATIN5/USART1_TX/CAN2_TX/QUADSPI_BK1_NCS/I2C4_SCL/FMC_SDNE1/DCMI_D5/EVENTOUT |
| 93 | PB7 | output | TIM4_CH2/I2C1_SDA/DFSDM1_CKIN5/USART1_RX/I2C4_SDA/FMC_NL/DCMI_VSYNC/EVENTOUT |
| 94 | BOOT0 | input | Boot mode selection pin to determine boot from flash or system bootloader |
| 95 | PB8 | output | I2C4_SCL/TIM4_CH3/TIM10_CH1/I2C1_SCL/DFSDM1_CKIN7/UART5_RX/CAN1_RX/SDMMC2_D4/ETH_MII_TXD3/SDMMC1_D4/DCMI_D6/LCD_B6/EVENTOUT |
| 96 | PB9 | output | I2C4_SDA/TIM4_CH4/TIM11_CH1/I2C1_SDA/SPI2_NSS/DFSDM1_DATIN7/UART5_TX/CAN1_TX/SDMMC2_D5/I2C4_SMBA/SDMMC1_D5/DCMI_D7/LCD_B7/EVENTOUT |
| 97 | PE0 | output | TIM4_ETR/LPTIM1_ETR/UART8_RX/SAI2_MCLK_A/FMC_NBL0/DCMI_D2/EVENTOUT |
| 98 | PE1 | output | LPTIM1_IN2/UART8_TX/FMC_NBL1/DCMI_D3/EVENTOUT |
| 99 | VSS | power_in | Ground connection point |
| 100 | VDD | power_in | Main power supply 1.7V to 3.6V |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LQFP-100(14x14) |
| Category | Embedded Processors & Controllers |
| Pins | 100 |
CAD (KiCad official)
- Symbol:
STM32F765VIT6 - Footprint:
Package_QFP:LQFP-100_14x14mm_P0.5mm - 3D model: LQFP-100(14x14) (KiCad packages3D, STEP)
- 3D model files:
stm32f765vit6-etched.step/stm32f765vit6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32f765vit6.step/stm32f765vit6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (255 pp, sha256
6ed07ca1dc9c1c0f, retrieved 2026-10-06, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).