main
Ray Publish 0.1.0 8555dbe

STM32F429ZGT6TR

STMicroelectronics · ST Microelectronics · LQFP-144(20x20)

STM32F429ZGT6TR from STMicroelectronics, in a LQFP-144(20x20). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PE2 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: TRACECLK, SPI4_SCK, SAI1_MCLK_A, ETH_MII_TXD3, FMC_A23, EVENTOUT.
2 PE3 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: TRACED0, SAI1_SD_B, FMC_A19, EVENTOUT.
3 PE4 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: TRACED1, SPI4_NSS, SAI1_FS_A, FMC_A20, DCMI_D4, LCD_B0, EVENTOUT.
4 PE5 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: TRACED2, TIM9_CH1, SPI4_MISO, SAI1_SCK_A, FMC_A21, DCMI_D6, LCD_G0, EVENTOUT.
5 PE6 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: TRACED3, TIM9_CH2, SPI4_MOSI, SAI1_SD_A, FMC_A22, DCMI_D7, LCD_G1, EVENTOUT.
6 VBAT power_in Backup-domain supply pin powering the RTC, the 20 x 32-bit backup registers and the optional 4 KB backup SRAM.
7 PC13 bidirectional 5 V-tolerant I/O (FT) supplied through the power switch, floating input after reset; its sink current is limited to 3 mA so output use is limited to 2 MHz at 30 pF and it must not source current; additional function: TAMP_1.
8 PC14-OSC32_IN bidirectional I/O (FT) supplied through the power switch with a 3 mA sink limit, usable as OSC32_IN oscillator pin; it is not 5 V-tolerant in oscillator mode and must not be used as a current source.
9 PC15-OSC32_OUT bidirectional I/O (FT) supplied through the power switch with a 3 mA sink limit, usable as OSC32_OUT oscillator pin; it is not 5 V-tolerant in oscillator mode and must not be used as a current source.
10 PF0 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: I2C2_SDA, FMC_A0, EVENTOUT.
11 PF1 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: I2C2_SCL, FMC_A1, EVENTOUT.
12 PF2 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: I2C2_SMBA, FMC_A2, EVENTOUT.
13 PF3 bidirectional 5 V-tolerant I/O (FT) except in analog mode, floating input after reset; alternate functions: FMC_A3, EVENTOUT; additional function: ADC3_IN9.
14 PF4 bidirectional 5 V-tolerant I/O (FT) except in analog mode, floating input after reset; alternate functions: FMC_A4, EVENTOUT; additional function: ADC3_IN14.
15 PF5 bidirectional 5 V-tolerant I/O (FT) except in analog mode, floating input after reset; alternate functions: FMC_A5, EVENTOUT; additional function: ADC3_IN15.
16 VSS power_in Ground pin for the digital domain.
17 VDD power_in Digital supply pin; the application supply and I/Os are specified at 1.7 V to 3.6 V.
18 PF6 bidirectional 5 V-tolerant I/O (FT) except in analog mode, floating input after reset; alternate functions: TIM10_CH1, SPI5_NSS, SAI1_SD_B, UART7_Rx, FMC_NIORD, EVENTOUT; additional function: ADC3_IN4.
19 PF7 bidirectional 5 V-tolerant I/O (FT) except in analog mode, floating input after reset; alternate functions: TIM11_CH1, SPI5_SCK, SAI1_MCLK_B, UART7_Tx, FMC_NREG, EVENTOUT; additional function: ADC3_IN5.
20 PF8 bidirectional 5 V-tolerant I/O (FT) except in analog mode, floating input after reset; alternate functions: SPI5_MISO, SAI1_SCK_B, TIM13_CH1, FMC_NIOWR, EVENTOUT; additional function: ADC3_IN6.
21 PF9 bidirectional 5 V-tolerant I/O (FT) except in analog mode, floating input after reset; alternate functions: SPI5_MOSI, SAI1_FS_B, TIM14_CH1, FMC_CD, EVENTOUT; additional function: ADC3_IN7.
22 PF10 bidirectional 5 V-tolerant I/O (FT) except in analog mode, floating input after reset; alternate functions: FMC_INTR, DCMI_D11, LCD_DE, EVENTOUT; additional function: ADC3_IN8.
23 PH0-OSC_IN bidirectional 5 V-tolerant I/O (FT) except in oscillator mode, floating input after reset; alternate function: EVENTOUT; additional function: OSC_IN oscillator input.
24 PH1-OSC_OUT bidirectional 5 V-tolerant I/O (FT) except in oscillator mode, floating input after reset; alternate function: EVENTOUT; additional function: OSC_OUT oscillator output.
25 NRST bidirectional Bidirectional reset pin with weak pull-up resistor.
26 PC0 bidirectional 5 V-tolerant I/O (FT) except in analog mode, floating input after reset; alternate functions: OTG_HS_ULPI_STP, FMC_SDNWE, EVENTOUT; additional function: ADC123_IN10.
27 PC1 bidirectional 5 V-tolerant I/O (FT) except in analog mode, floating input after reset; alternate functions: ETH_MDC, EVENTOUT; additional function: ADC123_IN11.
28 PC2 bidirectional 5 V-tolerant I/O (FT) except in analog mode, floating input after reset; alternate functions: SPI2_MISO, I2S2ext_SD, OTG_HS_ULPI_DIR, ETH_MII_TXD2, FMC_SDNE0, EVENTOUT; additional function: ADC123_IN12.
29 PC3 bidirectional 5 V-tolerant I/O (FT) except in analog mode, floating input after reset; alternate functions: SPI2_MOSI/I2S2_SD, OTG_HS_ULPI_NXT, ETH_MII_TX_CLK, FMC_SDCKE0, EVENTOUT; additional function: ADC123_IN13.
30 VDD power_in Digital supply pin; the application supply and I/Os are specified at 1.7 V to 3.6 V.
31 VSSA power_in Analog ground pin.
32 VREF+ power_in Positive reference voltage input pin for the analog converters.
33 VDDA power_in Analog supply pin.
34 PA0-WKUP bidirectional 5 V-tolerant I/O (FT) except in analog mode, floating input after reset; alternate functions: TIM2_CH1/TIM2_ETR, TIM5_CH1, TIM8_ETR, USART2_CTS, UART4_TX, ETH_MII_CRS, EVENTOUT; additional function: ADC123_IN0/WKUP.
35 PA1 bidirectional 5 V-tolerant I/O (FT) except in analog mode, floating input after reset; alternate functions: TIM2_CH2, TIM5_CH2, USART2_RTS, UART4_RX, ETH_MII_RX_CLK/ETH_RMII_REF_CLK, EVENTOUT; additional function: ADC123_IN1.
36 PA2 bidirectional 5 V-tolerant I/O (FT) except in analog mode, floating input after reset; alternate functions: TIM2_CH3, TIM5_CH3, TIM9_CH1, USART2_TX, ETH_MDIO, EVENTOUT; additional function: ADC123_IN2.
37 PA3 bidirectional 5 V-tolerant I/O (FT) except in analog mode, floating input after reset; alternate functions: TIM2_CH4, TIM5_CH4, TIM9_CH2, USART2_RX, OTG_HS_ULPI_D0, ETH_MII_COL, LCD_B5, EVENTOUT; additional function: ADC123_IN3.
38 VSS power_in Ground pin for the digital domain.
39 VDD power_in Digital supply pin; the application supply and I/Os are specified at 1.7 V to 3.6 V.
40 PA4 bidirectional 3.3 V-tolerant I/O (TTa) connected directly to the ADC, floating input after reset; alternate functions: SPI1_NSS, SPI3_NSS/I2S3_WS, USART2_CK, OTG_HS_SOF, DCMI_HSYNC, LCD_VSYNC, EVENTOUT; additional function: ADC12_IN4/DAC_OUT1.
41 PA5 bidirectional 3.3 V-tolerant I/O (TTa) connected directly to the ADC, floating input after reset; alternate functions: TIM2_CH1/TIM2_ETR, TIM8_CH1N, SPI1_SCK, OTG_HS_ULPI_CK, EVENTOUT; additional function: ADC12_IN5/DAC_OUT2.
42 PA6 bidirectional 5 V-tolerant I/O (FT) except in analog mode, floating input after reset; alternate functions: TIM1_BKIN, TIM3_CH1, TIM8_BKIN, SPI1_MISO, TIM13_CH1, DCMI_PIXCLK, LCD_G2, EVENTOUT; additional function: ADC12_IN6.
43 PA7 bidirectional 5 V-tolerant I/O (FT) except in analog mode, floating input after reset; alternate functions: TIM1_CH1N, TIM3_CH2, TIM8_CH1N, SPI1_MOSI, TIM14_CH1, ETH_MII_RX_DV/ETH_RMII_CRS_DV, EVENTOUT; additional function: ADC12_IN7.
44 PC4 bidirectional 5 V-tolerant I/O (FT) except in analog mode, floating input after reset; alternate functions: ETH_MII_RXD0/ETH_RMII_RXD0, EVENTOUT; additional function: ADC12_IN14.
45 PC5 bidirectional 5 V-tolerant I/O (FT) except in analog mode, floating input after reset; alternate functions: ETH_MII_RXD1/ETH_RMII_RXD1, EVENTOUT; additional function: ADC12_IN15.
46 PB0 bidirectional 5 V-tolerant I/O (FT) except in analog mode, floating input after reset; alternate functions: TIM1_CH2N, TIM3_CH3, TIM8_CH2N, LCD_R3, OTG_HS_ULPI_D1, ETH_MII_RXD2, EVENTOUT; additional function: ADC12_IN8.
47 PB1 bidirectional 5 V-tolerant I/O (FT) except in analog mode, floating input after reset; alternate functions: TIM1_CH3N, TIM3_CH4, TIM8_CH3N, LCD_R6, OTG_HS_ULPI_D2, ETH_MII_RXD3, EVENTOUT; additional function: ADC12_IN9.
48 PB2-BOOT1 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate function: EVENTOUT; BOOT1 is the boot-mode function of this pin.
49 PF11 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: SPI5_MOSI, FMC_SDNRAS, DCMI_D12, EVENTOUT.
50 PF12 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: FMC_A6, EVENTOUT.
51 VSS power_in Ground pin for the digital domain.
52 VDD power_in Digital supply pin; the application supply and I/Os are specified at 1.7 V to 3.6 V.
53 PF13 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: FMC_A7, EVENTOUT.
54 PF14 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: FMC_A8, EVENTOUT.
55 PF15 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: FMC_A9, EVENTOUT.
56 PG0 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: FMC_A10, EVENTOUT.
57 PG1 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: FMC_A11, EVENTOUT.
58 PE7 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: TIM1_ETR, UART7_Rx, FMC_D4, EVENTOUT.
59 PE8 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: TIM1_CH1N, UART7_Tx, FMC_D5, EVENTOUT.
60 PE9 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: TIM1_CH1, FMC_D6, EVENTOUT.
61 VSS power_in Ground pin for the digital domain.
62 VDD power_in Digital supply pin; the application supply and I/Os are specified at 1.7 V to 3.6 V.
63 PE10 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: TIM1_CH2N, FMC_D7, EVENTOUT.
64 PE11 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: TIM1_CH2, SPI4_NSS, FMC_D8, LCD_G3, EVENTOUT.
65 PE12 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: TIM1_CH3N, SPI4_SCK, FMC_D9, LCD_B4, EVENTOUT.
66 PE13 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: TIM1_CH3, SPI4_MISO, FMC_D10, LCD_DE, EVENTOUT.
67 PE14 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: TIM1_CH4, SPI4_MOSI, FMC_D11, LCD_CLK, EVENTOUT.
68 PE15 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: TIM1_BKIN, FMC_D12, LCD_R7, EVENTOUT.
69 PB10 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: TIM2_CH3, I2C2_SCL, SPI2_SCK/I2S2_CK, USART3_TX, OTG_HS_ULPI_D3, ETH_MII_RX_ER, LCD_G4, EVENTOUT.
70 PB11 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: TIM2_CH4, I2C2_SDA, USART3_RX, OTG_HS_ULPI_D4, ETH_MII_TX_EN/ETH_RMII_TX_EN, LCD_G5, EVENTOUT.
71 VCAP_1 power_in Connection pin for the external capacitor of the internal voltage regulator (VCAP1 external capacitor).
72 VDD power_in Digital supply pin; the application supply and I/Os are specified at 1.7 V to 3.6 V.
73 PB12 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: TIM1_BKIN, I2C2_SMBA, SPI2_NSS/I2S2_WS, USART3_CK, CAN2_RX, OTG_HS_ULPI_D5, ETH_MII_TXD0/ETH_RMII_TXD0, OTG_HS_ID, EVENTOUT.
74 PB13 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: TIM1_CH1N, SPI2_SCK/I2S2_CK, USART3_CTS, CAN2_TX, OTG_HS_ULPI_D6, ETH_MII_TXD1/ETH_RMII_TXD1, EVENTOUT; additional function: OTG_HS_VBUS.
75 PB14 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: TIM1_CH2N, TIM8_CH2N, SPI2_MISO, I2S2ext_SD, USART3_RTS, TIM12_CH1, OTG_HS_DM, EVENTOUT.
76 PB15 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: RTC_REFIN, TIM1_CH3N, TIM8_CH3N, SPI2_MOSI/I2S2_SD, TIM12_CH2, OTG_HS_DP, EVENTOUT.
77 PD8 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: USART3_TX, FMC_D13, EVENTOUT.
78 PD9 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: USART3_RX, FMC_D14, EVENTOUT.
79 PD10 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: USART3_CK, FMC_D15, LCD_B3, EVENTOUT.
80 PD11 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: USART3_CTS, FMC_A16, EVENTOUT.
81 PD12 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: TIM4_CH1, USART3_RTS, FMC_A17, EVENTOUT.
82 PD13 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: TIM4_CH2, FMC_A18, EVENTOUT.
83 VSS power_in Ground pin for the digital domain.
84 VDD power_in Digital supply pin; the application supply and I/Os are specified at 1.7 V to 3.6 V.
85 PD14 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: TIM4_CH3, FMC_D0, EVENTOUT.
86 PD15 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: TIM4_CH4, FMC_D1, EVENTOUT.
87 PG2 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: FMC_A12, EVENTOUT.
88 PG3 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: FMC_A13, EVENTOUT.
89 PG4 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: FMC_A14/FMC_BA0, EVENTOUT.
90 PG5 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: FMC_A15/FMC_BA1, EVENTOUT.
91 PG6 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: FMC_INT2, DCMI_D12, LCD_R7, EVENTOUT.
92 PG7 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: USART6_CK, FMC_INT3, DCMI_D13, LCD_CLK, EVENTOUT.
93 PG8 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: SPI6_NSS, USART6_RTS, ETH_PPS_OUT, FMC_SDCLK, EVENTOUT.
94 VSS power_in Ground pin for the digital domain.
95 VDD power_in Digital supply pin; the application supply and I/Os are specified at 1.7 V to 3.6 V.
96 PC6 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: TIM3_CH1, TIM8_CH1, I2S2_MCK, USART6_TX, SDIO_D6, DCMI_D0, LCD_HSYNC, EVENTOUT.
97 PC7 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: TIM3_CH2, TIM8_CH2, I2S3_MCK, USART6_RX, SDIO_D7, DCMI_D1, LCD_G6, EVENTOUT.
98 PC8 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: TIM3_CH3, TIM8_CH3, USART6_CK, SDIO_D0, DCMI_D2, EVENTOUT.
99 PC9 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: MCO2, TIM3_CH4, TIM8_CH4, I2C3_SDA, I2S_CKIN, SDIO_D1, DCMI_D3, EVENTOUT.
100 PA8 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: MCO1, TIM1_CH1, I2C3_SCL, USART1_CK, OTG_FS_SOF, LCD_R6, EVENTOUT.
101 PA9 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: TIM1_CH2, I2C3_SMBA, USART1_TX, DCMI_D0, EVENTOUT; additional function: OTG_FS_VBUS.
102 PA10 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: TIM1_CH3, USART1_RX, OTG_FS_ID, DCMI_D1, EVENTOUT.
103 PA11 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: TIM1_CH4, USART1_CTS, CAN1_RX, LCD_R4, OTG_FS_DM, EVENTOUT.
104 PA12 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: TIM1_ETR, USART1_RTS, CAN1_TX, LCD_R5, OTG_FS_DP, EVENTOUT.
105 PA13 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: JTMS-SWDIO, EVENTOUT.
106 VCAP_2 power_in Connection pin for the external capacitor of the internal voltage regulator (VCAP2 external capacitor).
107 VSS power_in Ground pin for the digital domain.
108 VDD power_in Digital supply pin; the application supply and I/Os are specified at 1.7 V to 3.6 V.
109 PA14 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: JTCK-SWCLK, EVENTOUT.
110 PA15 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: JTDI, TIM2_CH1/TIM2_ETR, SPI1_NSS, SPI3_NSS/I2S3_WS, EVENTOUT.
111 PC10 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: SPI3_SCK/I2S3_CK, USART3_TX, UART4_TX, SDIO_D2, DCMI_D8, LCD_R2, EVENTOUT.
112 PC11 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: I2S3ext_SD, SPI3_MISO, USART3_RX, UART4_RX, SDIO_D3, DCMI_D4, EVENTOUT.
113 PC12 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: SPI3_MOSI/I2S3_SD, USART3_CK, UART5_TX, SDIO_CK, DCMI_D9, EVENTOUT.
114 PD0 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: CAN1_RX, FMC_D2, EVENTOUT.
115 PD1 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: CAN1_TX, FMC_D3, EVENTOUT.
116 PD2 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: TIM3_ETR, UART5_RX, SDIO_CMD, DCMI_D11, EVENTOUT.
117 PD3 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: SPI2_SCK/I2S2_CK, USART2_CTS, FMC_CLK, DCMI_D5, LCD_G7, EVENTOUT.
118 PD4 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: USART2_RTS, FMC_NOE, EVENTOUT.
119 PD5 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: USART2_TX, FMC_NWE, EVENTOUT.
120 VSS power_in Ground pin for the digital domain.
121 VDD power_in Digital supply pin; the application supply and I/Os are specified at 1.7 V to 3.6 V.
122 PD6 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: SPI3_MOSI/I2S3_SD, SAI1_SD_A, USART2_RX, FMC_NWAIT, DCMI_D10, LCD_B2, EVENTOUT.
123 PD7 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: USART2_CK, FMC_NE1/FMC_NCE2, EVENTOUT.
124 PG9 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: USART6_RX, FMC_NE2/FMC_NCE3, DCMI_VSYNC (available only on silicon revision 3), EVENTOUT.
125 PG10 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: LCD_G3, FMC_NCE4_1/FMC_NE3, DCMI_D2, LCD_B2, EVENTOUT.
126 PG11 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: ETH_MII_TX_EN/ETH_RMII_TX_EN, FMC_NCE4_2, DCMI_D3, LCD_B3, EVENTOUT.
127 PG12 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: SPI6_MISO, USART6_RTS, LCD_B4, FMC_NE4, LCD_B1, EVENTOUT.
128 PG13 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: SPI6_SCK, USART6_CTS, ETH_MII_TXD0/ETH_RMII_TXD0, FMC_A24, EVENTOUT.
129 PG14 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: SPI6_MOSI, USART6_TX, ETH_MII_TXD1/ETH_RMII_TXD1, FMC_A25, EVENTOUT.
130 VSS power_in Ground pin for the digital domain.
131 VDD power_in Digital supply pin; the application supply and I/Os are specified at 1.7 V to 3.6 V.
132 PG15 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: USART6_CTS, FMC_SDNCAS, DCMI_D13, EVENTOUT.
133 PB3 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: JTDO/TRACESWO, TIM2_CH2, SPI1_SCK, SPI3_SCK/I2S3_CK, EVENTOUT.
134 PB4 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: NJTRST, TIM3_CH1, SPI1_MISO, SPI3_MISO, I2S3ext_SD, EVENTOUT.
135 PB5 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: TIM3_CH2, I2C1_SMBA, SPI1_MOSI, SPI3_MOSI/I2S3_SD, CAN2_RX, OTG_HS_ULPI_D7, ETH_PPS_OUT, FMC_SDCKE1, DCMI_D10, EVENTOUT.
136 PB6 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: TIM4_CH1, I2C1_SCL, USART1_TX, CAN2_TX, FMC_SDNE1, DCMI_D5, EVENTOUT.
137 PB7 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: TIM4_CH2, I2C1_SDA, USART1_RX, FMC_NL, DCMI_VSYNC, EVENTOUT.
138 BOOT0 input Dedicated BOOT0 input pin (B structure) that selects the boot mode; the table also lists its VPP function.
139 PB8 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: TIM4_CH3, TIM10_CH1, I2C1_SCL, CAN1_RX, ETH_MII_TXD3, SDIO_D4, DCMI_D6, LCD_B6, EVENTOUT.
140 PB9 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: TIM4_CH4, TIM11_CH1, I2C1_SDA, SPI2_NSS/I2S2_WS, CAN1_TX, SDIO_D5, DCMI_D7, LCD_B7, EVENTOUT.
141 PE0 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: TIM4_ETR, UART8_RX, FMC_NBL0, DCMI_D2, EVENTOUT.
142 PE1 bidirectional 5 V-tolerant I/O (FT), floating input after reset; alternate functions: UART8_Tx, FMC_NBL1, DCMI_D3, EVENTOUT.
143 PDR_ON power_in PDR_ON pin controlling the power-down reset (see Figure 7, PDR_ON control with internal reset OFF); Table 10 types it as a supply pin.
144 VDD power_in Digital supply pin; the application supply and I/Os are specified at 1.7 V to 3.6 V.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package LQFP-144(20x20)
Category Embedded Processors & Controllers
Pins 144

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
External main supply voltage (VDD, VDDA, VBAT) VDD-VSS -0.3 4 V 93
Input voltage on TTa pins VIN 4 V Input voltage on TTa pins 93
Input voltage on any other pin VIN 4 V Input voltage on any other pin 93
Input voltage on BOOT0 pin VIN 9 V Input voltage on BOOT0 pin 93
Variations between different VDD power pins /ΔVDDx/ 50 mV 93
Variations between all the different ground pins including VREF- /VSSx-VSS/ 50 mV 93
Total current into sum of all VDD_x power lines (source) ∑IVDD 270 mA 94
Total current out of sum of all VSS_x ground lines (sink) ∑IVSS -270 mA 94
Maximum current into each VDD_x power line (source) IVDD 100 mA 94
Maximum current out of each VSS_x ground line (sink) IVSS -100 mA 94
Output current sunk by any I/O and control pin IIO 25 mA Output current sunk by any I/O and control pin 94
Output current sourced by any I/Os and control pin IIO -25 mA Output current sourced by any I/Os and control pin 94
Total output current sunk by sum of all I/O and control pins ∑IIO 120 mA Total output current sunk by sum of all I/O and control pins 94
Total output current sourced by sum of all I/Os and control pins ∑IIO -120 mA Total output current sourced by sum of all I/Os and control pins 94
Injected current on FT pins IINJ(PIN) -5 0 mA Injected current on FT pins 94
Injected current on TTa pins IINJ(PIN) -5 5 mA Injected current on TTa pins 94
Total injected current (sum of all I/O and control pins) ∑IINJ(PIN) -25 25 mA Total injected current (sum of all I/O and control pins) 94
Storage temperature range TSTG -65 150 °C 94
Maximum junction temperature TJ 125 °C 94
Internal AHB clock frequency fHCLK 0 120 MHz Power Scale 3 (VOS[1:0] = 0x01), Regulator ON, over-drive OFF 95
Internal AHB clock frequency fHCLK 0 144 MHz Power Scale 2 (VOS[1:0] = 0x10), Regulator ON, over-drive OFF 95
Internal AHB clock frequency fHCLK 168 MHz Power Scale 2 (VOS[1:0] = 0x10), Regulator ON, over-drive ON 95
Internal AHB clock frequency fHCLK 0 168 MHz Power Scale 1 (VOS[1:0] = 0x11), Regulator ON, over-drive OFF 95
Internal AHB clock frequency fHCLK 180 MHz Power Scale 1 (VOS[1:0] = 0x11), Regulator ON, over-drive ON 95
Internal APB1 clock frequency fPCLK1 0 42 MHz Over-drive OFF 95
Internal APB1 clock frequency fPCLK1 0 45 MHz Over-drive ON 95
Internal APB2 clock frequency fPCLK2 0 84 MHz Over-drive OFF 95
Internal APB2 clock frequency fPCLK2 0 90 MHz Over-drive ON 95
Standard operating voltage VDD 1.7 3.6 V 95
Analog operating voltage (ADC limited to 1.2 M samples) VDDA 1.7 2.4 V ADC limited to 1.2 M samples; must be the same potential as VDD 95
Analog operating voltage (ADC limited to 2.4 M samples) VDDA 2.4 3.6 V ADC limited to 2.4 M samples 95
Backup operating voltage VBAT 1.65 3.6 V 95
1.2 V internal voltage on VCAP_1/VCAP_2 (regulator ON) V12 1.08 1.14 1.2 V Regulator ON; Power Scale 3 (VOS = 0x01), 120 MHz HCLK max frequency 95
1.2 V internal voltage on VCAP_1/VCAP_2 (regulator ON) V12 1.2 1.26 1.32 V Regulator ON; Power Scale 2 (VOS = 0x10), 144 MHz HCLK max with over-drive OFF or 168 MHz with over-drive ON 95
1.2 V internal voltage on VCAP_1/VCAP_2 (regulator ON) V12 1.26 1.32 1.4 V Regulator ON; Power Scale 1 (VOS = 0x11), 168 MHz HCLK max with over-drive OFF or 180 MHz with over-drive ON 95
1.2 V external voltage on VCAP_1/VCAP_2 (regulator OFF) V12 1.1 1.14 1.2 V Regulator OFF; max frequency 120 MHz 95
1.2 V external voltage on VCAP_1/VCAP_2 (regulator OFF) V12 1.2 1.26 1.32 V Regulator OFF; max frequency 144 MHz 95
1.2 V external voltage on VCAP_1/VCAP_2 (regulator OFF) V12 1.26 1.32 1.38 V Regulator OFF; max frequency 168 MHz 95
Input voltage on RST and FT pins (2 V ≤ VDD ≤ 3.6 V) VIN -0.3 5.5 V 2 V ≤ VDD ≤ 3.6 V 96
Input voltage on RST and FT pins (VDD ≤ 2 V) VIN -0.3 5.2 V VDD ≤ 2 V 96
Input voltage on BOOT0 pin VIN 0 9 V 96
Power dissipation (LQFP144) PD 500 mW TA = 85 °C for suffix 6 or TA = 105 °C for suffix 7 96
Ambient temperature, suffix 6 version (maximum power dissipation) TA -40 85 °C Maximum power dissipation 96
Ambient temperature, suffix 6 version (low power dissipation) TA -40 105 °C Low power dissipation 96
Junction temperature range, suffix 6 version TJ -40 105 °C 6 suffix version 96
Capacitance of external capacitor (VCAP1/VCAP2) CEXT 2.2 µF 97
ESR of external capacitor (VCAP1/VCAP2) ESR 2 Ω ESR of external capacitor 97
VDD rise time rate (power-up) tVDD 20 µs/V 98
VDD fall time rate (power-down) tVDD 20 µs/V 98
Power-on/power-down reset threshold VPOR/PDR 1.6 1.68 1.76 V Falling edge 99
Power-on/power-down reset threshold VPOR/PDR 1.64 1.72 1.8 V Rising edge 99
PDR hysteresis VPDRhyst 40 mV 99
Brownout level 1 threshold VBOR1 2.13 2.19 2.24 V Falling edge 99
Brownout level 1 threshold VBOR1 2.23 2.29 2.33 V Rising edge 99
BOR hysteresis VBORhyst 100 mV 99
POR reset temporization TRSTTEMPO 0.5 1.5 3 ms 99
Over-drive switch enable time (HSE) Tod_swen 45 100 µs HSE max for 4 MHz and min for 26 MHz 100
Over-drive switch disable time (HSE) Tod_swdis 20 80 µs HSE max for 4 MHz and min for 26 MHz 100
InRush current on voltage regulator power-on (POR or wakeup from Standby) IRUSH 160 mA POR or wakeup from Standby 100
InRush energy on voltage regulator power-on (POR or wakeup from Standby) ERUSH 5.4 µC VDD = 1.7 V, TA = 105 °C, IRUSH = 171 mA for 31 µs 100

CAD (KiCad official)

  • Symbol: STM32F429ZGT6TR
  • Footprint: Package_QFP:LQFP-144_20x20mm_P0.5mm
  • 3D model: LQFP-144(20x20) (KiCad packages3D, STEP)
  • 3D model files: stm32f429zgt6tr-etched.step / stm32f429zgt6tr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm32f429zgt6tr.step / stm32f429zgt6tr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (240 pp, sha256 6bc029f6d681b76c, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF