component
STM32F429ZGT6TR
Public Made by Adomby adom
STMicroelectronics ST Microelectronics, LQFP-144(20x20). Pinout checked against ST's open pin data, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
STM32F429ZGT6TR
STMicroelectronics · ST Microelectronics · LQFP-144(20x20)
STM32F429ZGT6TR from STMicroelectronics, in a LQFP-144(20x20). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PE2 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: TRACECLK, SPI4_SCK, SAI1_MCLK_A, ETH_MII_TXD3, FMC_A23, EVENTOUT. |
| 2 | PE3 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: TRACED0, SAI1_SD_B, FMC_A19, EVENTOUT. |
| 3 | PE4 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: TRACED1, SPI4_NSS, SAI1_FS_A, FMC_A20, DCMI_D4, LCD_B0, EVENTOUT. |
| 4 | PE5 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: TRACED2, TIM9_CH1, SPI4_MISO, SAI1_SCK_A, FMC_A21, DCMI_D6, LCD_G0, EVENTOUT. |
| 5 | PE6 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: TRACED3, TIM9_CH2, SPI4_MOSI, SAI1_SD_A, FMC_A22, DCMI_D7, LCD_G1, EVENTOUT. |
| 6 | VBAT | power_in | Backup-domain supply pin powering the RTC, the 20 x 32-bit backup registers and the optional 4 KB backup SRAM. |
| 7 | PC13 | bidirectional | 5 V-tolerant I/O (FT) supplied through the power switch, floating input after reset; its sink current is limited to 3 mA so output use is limited to 2 MHz at 30 pF and it must not source current; additional function: TAMP_1. |
| 8 | PC14-OSC32_IN | bidirectional | I/O (FT) supplied through the power switch with a 3 mA sink limit, usable as OSC32_IN oscillator pin; it is not 5 V-tolerant in oscillator mode and must not be used as a current source. |
| 9 | PC15-OSC32_OUT | bidirectional | I/O (FT) supplied through the power switch with a 3 mA sink limit, usable as OSC32_OUT oscillator pin; it is not 5 V-tolerant in oscillator mode and must not be used as a current source. |
| 10 | PF0 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: I2C2_SDA, FMC_A0, EVENTOUT. |
| 11 | PF1 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: I2C2_SCL, FMC_A1, EVENTOUT. |
| 12 | PF2 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: I2C2_SMBA, FMC_A2, EVENTOUT. |
| 13 | PF3 | bidirectional | 5 V-tolerant I/O (FT) except in analog mode, floating input after reset; alternate functions: FMC_A3, EVENTOUT; additional function: ADC3_IN9. |
| 14 | PF4 | bidirectional | 5 V-tolerant I/O (FT) except in analog mode, floating input after reset; alternate functions: FMC_A4, EVENTOUT; additional function: ADC3_IN14. |
| 15 | PF5 | bidirectional | 5 V-tolerant I/O (FT) except in analog mode, floating input after reset; alternate functions: FMC_A5, EVENTOUT; additional function: ADC3_IN15. |
| 16 | VSS | power_in | Ground pin for the digital domain. |
| 17 | VDD | power_in | Digital supply pin; the application supply and I/Os are specified at 1.7 V to 3.6 V. |
| 18 | PF6 | bidirectional | 5 V-tolerant I/O (FT) except in analog mode, floating input after reset; alternate functions: TIM10_CH1, SPI5_NSS, SAI1_SD_B, UART7_Rx, FMC_NIORD, EVENTOUT; additional function: ADC3_IN4. |
| 19 | PF7 | bidirectional | 5 V-tolerant I/O (FT) except in analog mode, floating input after reset; alternate functions: TIM11_CH1, SPI5_SCK, SAI1_MCLK_B, UART7_Tx, FMC_NREG, EVENTOUT; additional function: ADC3_IN5. |
| 20 | PF8 | bidirectional | 5 V-tolerant I/O (FT) except in analog mode, floating input after reset; alternate functions: SPI5_MISO, SAI1_SCK_B, TIM13_CH1, FMC_NIOWR, EVENTOUT; additional function: ADC3_IN6. |
| 21 | PF9 | bidirectional | 5 V-tolerant I/O (FT) except in analog mode, floating input after reset; alternate functions: SPI5_MOSI, SAI1_FS_B, TIM14_CH1, FMC_CD, EVENTOUT; additional function: ADC3_IN7. |
| 22 | PF10 | bidirectional | 5 V-tolerant I/O (FT) except in analog mode, floating input after reset; alternate functions: FMC_INTR, DCMI_D11, LCD_DE, EVENTOUT; additional function: ADC3_IN8. |
| 23 | PH0-OSC_IN | bidirectional | 5 V-tolerant I/O (FT) except in oscillator mode, floating input after reset; alternate function: EVENTOUT; additional function: OSC_IN oscillator input. |
| 24 | PH1-OSC_OUT | bidirectional | 5 V-tolerant I/O (FT) except in oscillator mode, floating input after reset; alternate function: EVENTOUT; additional function: OSC_OUT oscillator output. |
| 25 | NRST | bidirectional | Bidirectional reset pin with weak pull-up resistor. |
| 26 | PC0 | bidirectional | 5 V-tolerant I/O (FT) except in analog mode, floating input after reset; alternate functions: OTG_HS_ULPI_STP, FMC_SDNWE, EVENTOUT; additional function: ADC123_IN10. |
| 27 | PC1 | bidirectional | 5 V-tolerant I/O (FT) except in analog mode, floating input after reset; alternate functions: ETH_MDC, EVENTOUT; additional function: ADC123_IN11. |
| 28 | PC2 | bidirectional | 5 V-tolerant I/O (FT) except in analog mode, floating input after reset; alternate functions: SPI2_MISO, I2S2ext_SD, OTG_HS_ULPI_DIR, ETH_MII_TXD2, FMC_SDNE0, EVENTOUT; additional function: ADC123_IN12. |
| 29 | PC3 | bidirectional | 5 V-tolerant I/O (FT) except in analog mode, floating input after reset; alternate functions: SPI2_MOSI/I2S2_SD, OTG_HS_ULPI_NXT, ETH_MII_TX_CLK, FMC_SDCKE0, EVENTOUT; additional function: ADC123_IN13. |
| 30 | VDD | power_in | Digital supply pin; the application supply and I/Os are specified at 1.7 V to 3.6 V. |
| 31 | VSSA | power_in | Analog ground pin. |
| 32 | VREF+ | power_in | Positive reference voltage input pin for the analog converters. |
| 33 | VDDA | power_in | Analog supply pin. |
| 34 | PA0-WKUP | bidirectional | 5 V-tolerant I/O (FT) except in analog mode, floating input after reset; alternate functions: TIM2_CH1/TIM2_ETR, TIM5_CH1, TIM8_ETR, USART2_CTS, UART4_TX, ETH_MII_CRS, EVENTOUT; additional function: ADC123_IN0/WKUP. |
| 35 | PA1 | bidirectional | 5 V-tolerant I/O (FT) except in analog mode, floating input after reset; alternate functions: TIM2_CH2, TIM5_CH2, USART2_RTS, UART4_RX, ETH_MII_RX_CLK/ETH_RMII_REF_CLK, EVENTOUT; additional function: ADC123_IN1. |
| 36 | PA2 | bidirectional | 5 V-tolerant I/O (FT) except in analog mode, floating input after reset; alternate functions: TIM2_CH3, TIM5_CH3, TIM9_CH1, USART2_TX, ETH_MDIO, EVENTOUT; additional function: ADC123_IN2. |
| 37 | PA3 | bidirectional | 5 V-tolerant I/O (FT) except in analog mode, floating input after reset; alternate functions: TIM2_CH4, TIM5_CH4, TIM9_CH2, USART2_RX, OTG_HS_ULPI_D0, ETH_MII_COL, LCD_B5, EVENTOUT; additional function: ADC123_IN3. |
| 38 | VSS | power_in | Ground pin for the digital domain. |
| 39 | VDD | power_in | Digital supply pin; the application supply and I/Os are specified at 1.7 V to 3.6 V. |
| 40 | PA4 | bidirectional | 3.3 V-tolerant I/O (TTa) connected directly to the ADC, floating input after reset; alternate functions: SPI1_NSS, SPI3_NSS/I2S3_WS, USART2_CK, OTG_HS_SOF, DCMI_HSYNC, LCD_VSYNC, EVENTOUT; additional function: ADC12_IN4/DAC_OUT1. |
| 41 | PA5 | bidirectional | 3.3 V-tolerant I/O (TTa) connected directly to the ADC, floating input after reset; alternate functions: TIM2_CH1/TIM2_ETR, TIM8_CH1N, SPI1_SCK, OTG_HS_ULPI_CK, EVENTOUT; additional function: ADC12_IN5/DAC_OUT2. |
| 42 | PA6 | bidirectional | 5 V-tolerant I/O (FT) except in analog mode, floating input after reset; alternate functions: TIM1_BKIN, TIM3_CH1, TIM8_BKIN, SPI1_MISO, TIM13_CH1, DCMI_PIXCLK, LCD_G2, EVENTOUT; additional function: ADC12_IN6. |
| 43 | PA7 | bidirectional | 5 V-tolerant I/O (FT) except in analog mode, floating input after reset; alternate functions: TIM1_CH1N, TIM3_CH2, TIM8_CH1N, SPI1_MOSI, TIM14_CH1, ETH_MII_RX_DV/ETH_RMII_CRS_DV, EVENTOUT; additional function: ADC12_IN7. |
| 44 | PC4 | bidirectional | 5 V-tolerant I/O (FT) except in analog mode, floating input after reset; alternate functions: ETH_MII_RXD0/ETH_RMII_RXD0, EVENTOUT; additional function: ADC12_IN14. |
| 45 | PC5 | bidirectional | 5 V-tolerant I/O (FT) except in analog mode, floating input after reset; alternate functions: ETH_MII_RXD1/ETH_RMII_RXD1, EVENTOUT; additional function: ADC12_IN15. |
| 46 | PB0 | bidirectional | 5 V-tolerant I/O (FT) except in analog mode, floating input after reset; alternate functions: TIM1_CH2N, TIM3_CH3, TIM8_CH2N, LCD_R3, OTG_HS_ULPI_D1, ETH_MII_RXD2, EVENTOUT; additional function: ADC12_IN8. |
| 47 | PB1 | bidirectional | 5 V-tolerant I/O (FT) except in analog mode, floating input after reset; alternate functions: TIM1_CH3N, TIM3_CH4, TIM8_CH3N, LCD_R6, OTG_HS_ULPI_D2, ETH_MII_RXD3, EVENTOUT; additional function: ADC12_IN9. |
| 48 | PB2-BOOT1 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate function: EVENTOUT; BOOT1 is the boot-mode function of this pin. |
| 49 | PF11 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: SPI5_MOSI, FMC_SDNRAS, DCMI_D12, EVENTOUT. |
| 50 | PF12 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: FMC_A6, EVENTOUT. |
| 51 | VSS | power_in | Ground pin for the digital domain. |
| 52 | VDD | power_in | Digital supply pin; the application supply and I/Os are specified at 1.7 V to 3.6 V. |
| 53 | PF13 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: FMC_A7, EVENTOUT. |
| 54 | PF14 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: FMC_A8, EVENTOUT. |
| 55 | PF15 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: FMC_A9, EVENTOUT. |
| 56 | PG0 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: FMC_A10, EVENTOUT. |
| 57 | PG1 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: FMC_A11, EVENTOUT. |
| 58 | PE7 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: TIM1_ETR, UART7_Rx, FMC_D4, EVENTOUT. |
| 59 | PE8 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: TIM1_CH1N, UART7_Tx, FMC_D5, EVENTOUT. |
| 60 | PE9 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: TIM1_CH1, FMC_D6, EVENTOUT. |
| 61 | VSS | power_in | Ground pin for the digital domain. |
| 62 | VDD | power_in | Digital supply pin; the application supply and I/Os are specified at 1.7 V to 3.6 V. |
| 63 | PE10 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: TIM1_CH2N, FMC_D7, EVENTOUT. |
| 64 | PE11 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: TIM1_CH2, SPI4_NSS, FMC_D8, LCD_G3, EVENTOUT. |
| 65 | PE12 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: TIM1_CH3N, SPI4_SCK, FMC_D9, LCD_B4, EVENTOUT. |
| 66 | PE13 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: TIM1_CH3, SPI4_MISO, FMC_D10, LCD_DE, EVENTOUT. |
| 67 | PE14 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: TIM1_CH4, SPI4_MOSI, FMC_D11, LCD_CLK, EVENTOUT. |
| 68 | PE15 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: TIM1_BKIN, FMC_D12, LCD_R7, EVENTOUT. |
| 69 | PB10 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: TIM2_CH3, I2C2_SCL, SPI2_SCK/I2S2_CK, USART3_TX, OTG_HS_ULPI_D3, ETH_MII_RX_ER, LCD_G4, EVENTOUT. |
| 70 | PB11 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: TIM2_CH4, I2C2_SDA, USART3_RX, OTG_HS_ULPI_D4, ETH_MII_TX_EN/ETH_RMII_TX_EN, LCD_G5, EVENTOUT. |
| 71 | VCAP_1 | power_in | Connection pin for the external capacitor of the internal voltage regulator (VCAP1 external capacitor). |
| 72 | VDD | power_in | Digital supply pin; the application supply and I/Os are specified at 1.7 V to 3.6 V. |
| 73 | PB12 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: TIM1_BKIN, I2C2_SMBA, SPI2_NSS/I2S2_WS, USART3_CK, CAN2_RX, OTG_HS_ULPI_D5, ETH_MII_TXD0/ETH_RMII_TXD0, OTG_HS_ID, EVENTOUT. |
| 74 | PB13 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: TIM1_CH1N, SPI2_SCK/I2S2_CK, USART3_CTS, CAN2_TX, OTG_HS_ULPI_D6, ETH_MII_TXD1/ETH_RMII_TXD1, EVENTOUT; additional function: OTG_HS_VBUS. |
| 75 | PB14 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: TIM1_CH2N, TIM8_CH2N, SPI2_MISO, I2S2ext_SD, USART3_RTS, TIM12_CH1, OTG_HS_DM, EVENTOUT. |
| 76 | PB15 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: RTC_REFIN, TIM1_CH3N, TIM8_CH3N, SPI2_MOSI/I2S2_SD, TIM12_CH2, OTG_HS_DP, EVENTOUT. |
| 77 | PD8 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: USART3_TX, FMC_D13, EVENTOUT. |
| 78 | PD9 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: USART3_RX, FMC_D14, EVENTOUT. |
| 79 | PD10 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: USART3_CK, FMC_D15, LCD_B3, EVENTOUT. |
| 80 | PD11 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: USART3_CTS, FMC_A16, EVENTOUT. |
| 81 | PD12 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: TIM4_CH1, USART3_RTS, FMC_A17, EVENTOUT. |
| 82 | PD13 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: TIM4_CH2, FMC_A18, EVENTOUT. |
| 83 | VSS | power_in | Ground pin for the digital domain. |
| 84 | VDD | power_in | Digital supply pin; the application supply and I/Os are specified at 1.7 V to 3.6 V. |
| 85 | PD14 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: TIM4_CH3, FMC_D0, EVENTOUT. |
| 86 | PD15 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: TIM4_CH4, FMC_D1, EVENTOUT. |
| 87 | PG2 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: FMC_A12, EVENTOUT. |
| 88 | PG3 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: FMC_A13, EVENTOUT. |
| 89 | PG4 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: FMC_A14/FMC_BA0, EVENTOUT. |
| 90 | PG5 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: FMC_A15/FMC_BA1, EVENTOUT. |
| 91 | PG6 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: FMC_INT2, DCMI_D12, LCD_R7, EVENTOUT. |
| 92 | PG7 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: USART6_CK, FMC_INT3, DCMI_D13, LCD_CLK, EVENTOUT. |
| 93 | PG8 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: SPI6_NSS, USART6_RTS, ETH_PPS_OUT, FMC_SDCLK, EVENTOUT. |
| 94 | VSS | power_in | Ground pin for the digital domain. |
| 95 | VDD | power_in | Digital supply pin; the application supply and I/Os are specified at 1.7 V to 3.6 V. |
| 96 | PC6 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: TIM3_CH1, TIM8_CH1, I2S2_MCK, USART6_TX, SDIO_D6, DCMI_D0, LCD_HSYNC, EVENTOUT. |
| 97 | PC7 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: TIM3_CH2, TIM8_CH2, I2S3_MCK, USART6_RX, SDIO_D7, DCMI_D1, LCD_G6, EVENTOUT. |
| 98 | PC8 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: TIM3_CH3, TIM8_CH3, USART6_CK, SDIO_D0, DCMI_D2, EVENTOUT. |
| 99 | PC9 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: MCO2, TIM3_CH4, TIM8_CH4, I2C3_SDA, I2S_CKIN, SDIO_D1, DCMI_D3, EVENTOUT. |
| 100 | PA8 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: MCO1, TIM1_CH1, I2C3_SCL, USART1_CK, OTG_FS_SOF, LCD_R6, EVENTOUT. |
| 101 | PA9 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: TIM1_CH2, I2C3_SMBA, USART1_TX, DCMI_D0, EVENTOUT; additional function: OTG_FS_VBUS. |
| 102 | PA10 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: TIM1_CH3, USART1_RX, OTG_FS_ID, DCMI_D1, EVENTOUT. |
| 103 | PA11 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: TIM1_CH4, USART1_CTS, CAN1_RX, LCD_R4, OTG_FS_DM, EVENTOUT. |
| 104 | PA12 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: TIM1_ETR, USART1_RTS, CAN1_TX, LCD_R5, OTG_FS_DP, EVENTOUT. |
| 105 | PA13 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: JTMS-SWDIO, EVENTOUT. |
| 106 | VCAP_2 | power_in | Connection pin for the external capacitor of the internal voltage regulator (VCAP2 external capacitor). |
| 107 | VSS | power_in | Ground pin for the digital domain. |
| 108 | VDD | power_in | Digital supply pin; the application supply and I/Os are specified at 1.7 V to 3.6 V. |
| 109 | PA14 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: JTCK-SWCLK, EVENTOUT. |
| 110 | PA15 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: JTDI, TIM2_CH1/TIM2_ETR, SPI1_NSS, SPI3_NSS/I2S3_WS, EVENTOUT. |
| 111 | PC10 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: SPI3_SCK/I2S3_CK, USART3_TX, UART4_TX, SDIO_D2, DCMI_D8, LCD_R2, EVENTOUT. |
| 112 | PC11 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: I2S3ext_SD, SPI3_MISO, USART3_RX, UART4_RX, SDIO_D3, DCMI_D4, EVENTOUT. |
| 113 | PC12 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: SPI3_MOSI/I2S3_SD, USART3_CK, UART5_TX, SDIO_CK, DCMI_D9, EVENTOUT. |
| 114 | PD0 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: CAN1_RX, FMC_D2, EVENTOUT. |
| 115 | PD1 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: CAN1_TX, FMC_D3, EVENTOUT. |
| 116 | PD2 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: TIM3_ETR, UART5_RX, SDIO_CMD, DCMI_D11, EVENTOUT. |
| 117 | PD3 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: SPI2_SCK/I2S2_CK, USART2_CTS, FMC_CLK, DCMI_D5, LCD_G7, EVENTOUT. |
| 118 | PD4 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: USART2_RTS, FMC_NOE, EVENTOUT. |
| 119 | PD5 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: USART2_TX, FMC_NWE, EVENTOUT. |
| 120 | VSS | power_in | Ground pin for the digital domain. |
| 121 | VDD | power_in | Digital supply pin; the application supply and I/Os are specified at 1.7 V to 3.6 V. |
| 122 | PD6 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: SPI3_MOSI/I2S3_SD, SAI1_SD_A, USART2_RX, FMC_NWAIT, DCMI_D10, LCD_B2, EVENTOUT. |
| 123 | PD7 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: USART2_CK, FMC_NE1/FMC_NCE2, EVENTOUT. |
| 124 | PG9 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: USART6_RX, FMC_NE2/FMC_NCE3, DCMI_VSYNC (available only on silicon revision 3), EVENTOUT. |
| 125 | PG10 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: LCD_G3, FMC_NCE4_1/FMC_NE3, DCMI_D2, LCD_B2, EVENTOUT. |
| 126 | PG11 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: ETH_MII_TX_EN/ETH_RMII_TX_EN, FMC_NCE4_2, DCMI_D3, LCD_B3, EVENTOUT. |
| 127 | PG12 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: SPI6_MISO, USART6_RTS, LCD_B4, FMC_NE4, LCD_B1, EVENTOUT. |
| 128 | PG13 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: SPI6_SCK, USART6_CTS, ETH_MII_TXD0/ETH_RMII_TXD0, FMC_A24, EVENTOUT. |
| 129 | PG14 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: SPI6_MOSI, USART6_TX, ETH_MII_TXD1/ETH_RMII_TXD1, FMC_A25, EVENTOUT. |
| 130 | VSS | power_in | Ground pin for the digital domain. |
| 131 | VDD | power_in | Digital supply pin; the application supply and I/Os are specified at 1.7 V to 3.6 V. |
| 132 | PG15 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: USART6_CTS, FMC_SDNCAS, DCMI_D13, EVENTOUT. |
| 133 | PB3 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: JTDO/TRACESWO, TIM2_CH2, SPI1_SCK, SPI3_SCK/I2S3_CK, EVENTOUT. |
| 134 | PB4 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: NJTRST, TIM3_CH1, SPI1_MISO, SPI3_MISO, I2S3ext_SD, EVENTOUT. |
| 135 | PB5 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: TIM3_CH2, I2C1_SMBA, SPI1_MOSI, SPI3_MOSI/I2S3_SD, CAN2_RX, OTG_HS_ULPI_D7, ETH_PPS_OUT, FMC_SDCKE1, DCMI_D10, EVENTOUT. |
| 136 | PB6 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: TIM4_CH1, I2C1_SCL, USART1_TX, CAN2_TX, FMC_SDNE1, DCMI_D5, EVENTOUT. |
| 137 | PB7 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: TIM4_CH2, I2C1_SDA, USART1_RX, FMC_NL, DCMI_VSYNC, EVENTOUT. |
| 138 | BOOT0 | input | Dedicated BOOT0 input pin (B structure) that selects the boot mode; the table also lists its VPP function. |
| 139 | PB8 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: TIM4_CH3, TIM10_CH1, I2C1_SCL, CAN1_RX, ETH_MII_TXD3, SDIO_D4, DCMI_D6, LCD_B6, EVENTOUT. |
| 140 | PB9 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: TIM4_CH4, TIM11_CH1, I2C1_SDA, SPI2_NSS/I2S2_WS, CAN1_TX, SDIO_D5, DCMI_D7, LCD_B7, EVENTOUT. |
| 141 | PE0 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: TIM4_ETR, UART8_RX, FMC_NBL0, DCMI_D2, EVENTOUT. |
| 142 | PE1 | bidirectional | 5 V-tolerant I/O (FT), floating input after reset; alternate functions: UART8_Tx, FMC_NBL1, DCMI_D3, EVENTOUT. |
| 143 | PDR_ON | power_in | PDR_ON pin controlling the power-down reset (see Figure 7, PDR_ON control with internal reset OFF); Table 10 types it as a supply pin. |
| 144 | VDD | power_in | Digital supply pin; the application supply and I/Os are specified at 1.7 V to 3.6 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LQFP-144(20x20) |
| Category | Embedded Processors & Controllers |
| Pins | 144 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| External main supply voltage (VDD, VDDA, VBAT) | VDD-VSS | -0.3 | 4 | V | 93 | ||
| Input voltage on TTa pins | VIN | 4 | V | Input voltage on TTa pins | 93 | ||
| Input voltage on any other pin | VIN | 4 | V | Input voltage on any other pin | 93 | ||
| Input voltage on BOOT0 pin | VIN | 9 | V | Input voltage on BOOT0 pin | 93 | ||
| Variations between different VDD power pins | /ΔVDDx/ | 50 | mV | 93 | |||
| Variations between all the different ground pins including VREF- | /VSSx-VSS/ | 50 | mV | 93 | |||
| Total current into sum of all VDD_x power lines (source) | ∑IVDD | 270 | mA | 94 | |||
| Total current out of sum of all VSS_x ground lines (sink) | ∑IVSS | -270 | mA | 94 | |||
| Maximum current into each VDD_x power line (source) | IVDD | 100 | mA | 94 | |||
| Maximum current out of each VSS_x ground line (sink) | IVSS | -100 | mA | 94 | |||
| Output current sunk by any I/O and control pin | IIO | 25 | mA | Output current sunk by any I/O and control pin | 94 | ||
| Output current sourced by any I/Os and control pin | IIO | -25 | mA | Output current sourced by any I/Os and control pin | 94 | ||
| Total output current sunk by sum of all I/O and control pins | ∑IIO | 120 | mA | Total output current sunk by sum of all I/O and control pins | 94 | ||
| Total output current sourced by sum of all I/Os and control pins | ∑IIO | -120 | mA | Total output current sourced by sum of all I/Os and control pins | 94 | ||
| Injected current on FT pins | IINJ(PIN) | -5 | 0 | mA | Injected current on FT pins | 94 | |
| Injected current on TTa pins | IINJ(PIN) | -5 | 5 | mA | Injected current on TTa pins | 94 | |
| Total injected current (sum of all I/O and control pins) | ∑IINJ(PIN) | -25 | 25 | mA | Total injected current (sum of all I/O and control pins) | 94 | |
| Storage temperature range | TSTG | -65 | 150 | °C | 94 | ||
| Maximum junction temperature | TJ | 125 | °C | 94 | |||
| Internal AHB clock frequency | fHCLK | 0 | 120 | MHz | Power Scale 3 (VOS[1:0] = 0x01), Regulator ON, over-drive OFF | 95 | |
| Internal AHB clock frequency | fHCLK | 0 | 144 | MHz | Power Scale 2 (VOS[1:0] = 0x10), Regulator ON, over-drive OFF | 95 | |
| Internal AHB clock frequency | fHCLK | 168 | MHz | Power Scale 2 (VOS[1:0] = 0x10), Regulator ON, over-drive ON | 95 | ||
| Internal AHB clock frequency | fHCLK | 0 | 168 | MHz | Power Scale 1 (VOS[1:0] = 0x11), Regulator ON, over-drive OFF | 95 | |
| Internal AHB clock frequency | fHCLK | 180 | MHz | Power Scale 1 (VOS[1:0] = 0x11), Regulator ON, over-drive ON | 95 | ||
| Internal APB1 clock frequency | fPCLK1 | 0 | 42 | MHz | Over-drive OFF | 95 | |
| Internal APB1 clock frequency | fPCLK1 | 0 | 45 | MHz | Over-drive ON | 95 | |
| Internal APB2 clock frequency | fPCLK2 | 0 | 84 | MHz | Over-drive OFF | 95 | |
| Internal APB2 clock frequency | fPCLK2 | 0 | 90 | MHz | Over-drive ON | 95 | |
| Standard operating voltage | VDD | 1.7 | 3.6 | V | 95 | ||
| Analog operating voltage (ADC limited to 1.2 M samples) | VDDA | 1.7 | 2.4 | V | ADC limited to 1.2 M samples; must be the same potential as VDD | 95 | |
| Analog operating voltage (ADC limited to 2.4 M samples) | VDDA | 2.4 | 3.6 | V | ADC limited to 2.4 M samples | 95 | |
| Backup operating voltage | VBAT | 1.65 | 3.6 | V | 95 | ||
| 1.2 V internal voltage on VCAP_1/VCAP_2 (regulator ON) | V12 | 1.08 | 1.14 | 1.2 | V | Regulator ON; Power Scale 3 (VOS = 0x01), 120 MHz HCLK max frequency | 95 |
| 1.2 V internal voltage on VCAP_1/VCAP_2 (regulator ON) | V12 | 1.2 | 1.26 | 1.32 | V | Regulator ON; Power Scale 2 (VOS = 0x10), 144 MHz HCLK max with over-drive OFF or 168 MHz with over-drive ON | 95 |
| 1.2 V internal voltage on VCAP_1/VCAP_2 (regulator ON) | V12 | 1.26 | 1.32 | 1.4 | V | Regulator ON; Power Scale 1 (VOS = 0x11), 168 MHz HCLK max with over-drive OFF or 180 MHz with over-drive ON | 95 |
| 1.2 V external voltage on VCAP_1/VCAP_2 (regulator OFF) | V12 | 1.1 | 1.14 | 1.2 | V | Regulator OFF; max frequency 120 MHz | 95 |
| 1.2 V external voltage on VCAP_1/VCAP_2 (regulator OFF) | V12 | 1.2 | 1.26 | 1.32 | V | Regulator OFF; max frequency 144 MHz | 95 |
| 1.2 V external voltage on VCAP_1/VCAP_2 (regulator OFF) | V12 | 1.26 | 1.32 | 1.38 | V | Regulator OFF; max frequency 168 MHz | 95 |
| Input voltage on RST and FT pins (2 V ≤ VDD ≤ 3.6 V) | VIN | -0.3 | 5.5 | V | 2 V ≤ VDD ≤ 3.6 V | 96 | |
| Input voltage on RST and FT pins (VDD ≤ 2 V) | VIN | -0.3 | 5.2 | V | VDD ≤ 2 V | 96 | |
| Input voltage on BOOT0 pin | VIN | 0 | 9 | V | 96 | ||
| Power dissipation (LQFP144) | PD | 500 | mW | TA = 85 °C for suffix 6 or TA = 105 °C for suffix 7 | 96 | ||
| Ambient temperature, suffix 6 version (maximum power dissipation) | TA | -40 | 85 | °C | Maximum power dissipation | 96 | |
| Ambient temperature, suffix 6 version (low power dissipation) | TA | -40 | 105 | °C | Low power dissipation | 96 | |
| Junction temperature range, suffix 6 version | TJ | -40 | 105 | °C | 6 suffix version | 96 | |
| Capacitance of external capacitor (VCAP1/VCAP2) | CEXT | 2.2 | µF | 97 | |||
| ESR of external capacitor (VCAP1/VCAP2) | ESR | 2 | Ω | ESR of external capacitor | 97 | ||
| VDD rise time rate (power-up) | tVDD | 20 | µs/V | 98 | |||
| VDD fall time rate (power-down) | tVDD | 20 | µs/V | 98 | |||
| Power-on/power-down reset threshold | VPOR/PDR | 1.6 | 1.68 | 1.76 | V | Falling edge | 99 |
| Power-on/power-down reset threshold | VPOR/PDR | 1.64 | 1.72 | 1.8 | V | Rising edge | 99 |
| PDR hysteresis | VPDRhyst | 40 | mV | 99 | |||
| Brownout level 1 threshold | VBOR1 | 2.13 | 2.19 | 2.24 | V | Falling edge | 99 |
| Brownout level 1 threshold | VBOR1 | 2.23 | 2.29 | 2.33 | V | Rising edge | 99 |
| BOR hysteresis | VBORhyst | 100 | mV | 99 | |||
| POR reset temporization | TRSTTEMPO | 0.5 | 1.5 | 3 | ms | 99 | |
| Over-drive switch enable time (HSE) | Tod_swen | 45 | 100 | µs | HSE max for 4 MHz and min for 26 MHz | 100 | |
| Over-drive switch disable time (HSE) | Tod_swdis | 20 | 80 | µs | HSE max for 4 MHz and min for 26 MHz | 100 | |
| InRush current on voltage regulator power-on (POR or wakeup from Standby) | IRUSH | 160 | mA | POR or wakeup from Standby | 100 | ||
| InRush energy on voltage regulator power-on (POR or wakeup from Standby) | ERUSH | 5.4 | µC | VDD = 1.7 V, TA = 105 °C, IRUSH = 171 mA for 31 µs | 100 |
CAD (KiCad official)
- Symbol:
STM32F429ZGT6TR - Footprint:
Package_QFP:LQFP-144_20x20mm_P0.5mm - 3D model: LQFP-144(20x20) (KiCad packages3D, STEP)
- 3D model files:
stm32f429zgt6tr-etched.step/stm32f429zgt6tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32f429zgt6tr.step/stm32f429zgt6tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (240 pp, sha256
6bc029f6d681b76c, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).