main
History Download
Ray Publish 0.1.0 72b1281

STM32F427IGT6

STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · LQFP-176(24x24)

STM32F427IGT6 from STMicroelectronics, in a LQFP-176(24x24). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PE2 bidirectional FT (5 V tolerant) I/O; alternate functions TRACECLK, SPI4_SCK, SAI1_MCLK_A, ETH_MII_TXD3, FMC_A23.
2 PE3 bidirectional FT (5 V tolerant) I/O; alternate functions TRACED0, SAI1_SD_B, FMC_A19.
3 PE4 bidirectional FT (5 V tolerant) I/O; alternate functions TRACED1, SPI4_NSS, SAI1_FS_A, FMC_A20, DCMI_D4, LCD_B0.
4 PE5 bidirectional FT (5 V tolerant) I/O; alternate functions TRACED2, TIM9_CH1, SPI4_MISO, SAI1_SCK_A, FMC_A21, DCMI_D6, LCD_G0.
5 PE6 bidirectional FT (5 V tolerant) I/O; alternate functions TRACED3, TIM9_CH2, SPI4_MOSI, SAI1_SD_A, FMC_A22, DCMI_D7, LCD_G1.
6 VBAT power_in Backup supply for RTC, LSE oscillator, backup registers and backup SRAM when VDD is absent, 1.65 to 3.6 V; connect to VDD when internal reset is OFF.
7 PI8 bidirectional FT I/O powered through backup-domain switch with 3 mA sink limit; in output mode max 2 MHz with 30 pF load; TAMP_2 function.
8 PC13 bidirectional FT I/O powered through backup-domain switch with 3 mA limit; in output mode max 2 MHz with 30 pF load, not usable as a current source; TAMP_1 function.
9 PC14-OSC32_IN bidirectional FT I/O (3 mA limit, max 2 MHz at 30 pF in output mode) also serving as the 32 kHz LSE oscillator input OSC32_IN.
10 PC15-OSC32_OUT bidirectional FT I/O (3 mA limit, max 2 MHz at 30 pF in output mode) also serving as the 32 kHz LSE oscillator output OSC32_OUT.
11 PI9 bidirectional FT (5 V tolerant) I/O; alternate functions CAN1_RX, FMC_D30, LCD_VSYNC.
12 PI10 bidirectional FT (5 V tolerant) I/O; alternate functions ETH_MII_RX_ER, FMC_D31, LCD_HSYNC.
13 PI11 bidirectional FT (5 V tolerant) I/O; alternate function OTG_HS_ULPI_DIR.
14 VSS power_in Digital ground; all VSS pins must be connected to external ground.
15 VDD power_in Digital supply 1.7 to 3.6 V for I/O and internal regulator; decouple with ceramic capacitor.
16 PF0 bidirectional FT (5 V tolerant) I/O; alternate functions I2C2_SDA, FMC_A0.
17 PF1 bidirectional FT (5 V tolerant) I/O; alternate functions I2C2_SCL, FMC_A1.
18 PF2 bidirectional FT (5 V tolerant) I/O; alternate functions I2C2_SMBA, FMC_A2.
19 PF3 bidirectional FT I/O (5 V tolerant except in analog mode); alternate function FMC_A3; analog input ADC3_IN9.
20 PF4 bidirectional FT I/O (5 V tolerant except in analog mode); alternate function FMC_A4; analog input ADC3_IN14.
21 PF5 bidirectional FT I/O (5 V tolerant except in analog mode); alternate function FMC_A5; analog input ADC3_IN15.
22 VSS power_in Digital ground; all VSS pins must be connected to external ground.
23 VDD power_in Digital supply 1.7 to 3.6 V for I/O and internal regulator.
24 PF6 bidirectional FT I/O; alternate functions TIM10_CH1, SPI5_NSS, SAI1_SD_B, UART7_Rx, FMC_NIORD; analog input ADC3_IN4.
25 PF7 bidirectional FT I/O; alternate functions TIM11_CH1, SPI5_SCK, SAI1_MCLK_B, UART7_Tx, FMC_NREG; analog input ADC3_IN5.
26 PF8 bidirectional FT I/O; alternate functions SPI5_MISO, SAI1_SCK_B, TIM13_CH1, FMC_NIOWR; analog input ADC3_IN6.
27 PF9 bidirectional FT I/O; alternate functions SPI5_MOSI, SAI1_FS_B, TIM14_CH1, FMC_CD; analog input ADC3_IN7.
28 PF10 bidirectional FT I/O; alternate functions FMC_INTR, DCMI_D11, LCD_DE; analog input ADC3_IN8.
29 PH0-OSC_IN bidirectional FT I/O also serving as the 4 to 26 MHz HSE oscillator input OSC_IN (also accepts external clock 1 to 50 MHz in bypass).
30 PH1-OSC_OUT bidirectional FT I/O also serving as the HSE oscillator output OSC_OUT.
31 NRST bidirectional Bidirectional reset pin with weak pull-up (30 to 50 kΩ); input pulses under 100 ns are filtered, over 300 ns are recognized.
32 PC0 bidirectional FT I/O; alternate functions OTG_HS_ULPI_STP, FMC_SDNWE; analog input ADC123_IN10.
33 PC1 bidirectional FT I/O; alternate function ETH_MDC; analog input ADC123_IN11.
34 PC2 bidirectional FT I/O; alternate functions SPI2_MISO, I2S2ext_SD, OTG_HS_ULPI_DIR, ETH_MII_TXD2, FMC_SDNE0; analog input ADC123_IN12.
35 PC3 bidirectional FT I/O; alternate functions SPI2_MOSI/I2S2_SD, OTG_HS_ULPI_NXT, ETH_MII_TX_CLK, FMC_SDCKE0; analog input ADC123_IN13.
36 VDD power_in Digital supply 1.7 to 3.6 V for I/O and internal regulator.
37 VSSA power_in Analog ground for ADC, DAC, reset block, RC and PLL; must be connected to VSS.
38 VREF+ power_in ADC/DAC positive reference voltage, 1.7 to 3.6 V, with VREF+ ≤ VDDA and VDDA-VREF+ < 1.2 V.
39 VDDA power_in Analog supply 1.7 to 3.6 V (2.4 to 3.6 V for 2.4 Msps ADC); must be connected to VDD.
40 PA0-WKUP bidirectional FT I/O; WKUP wakeup, TIM2_CH1/ETR, TIM5_CH1, TIM8_ETR, USART2_CTS, UART4_TX, ETH_MII_CRS; ADC123_IN0; acts as internal reset (active low) when BYPASS_REG is tied to VDD.
41 PA1 bidirectional FT I/O; alternate functions TIM2_CH2, TIM5_CH2, USART2_RTS, UART4_RX, ETH_MII_RX_CLK/ETH_RMII_REF_CLK; analog input ADC123_IN1.
42 PA2 bidirectional FT I/O; alternate functions TIM2_CH3, TIM5_CH3, TIM9_CH1, USART2_TX, ETH_MDIO; analog input ADC123_IN2.
43 PH2 bidirectional FT (5 V tolerant) I/O; alternate functions ETH_MII_CRS, FMC_SDCKE0, LCD_R0.
44 PH3 bidirectional FT (5 V tolerant) I/O; alternate functions ETH_MII_COL, FMC_SDNE0, LCD_R1.
45 PH4 bidirectional FT (5 V tolerant) I/O; alternate functions I2C2_SCL, OTG_HS_ULPI_NXT.
46 PH5 bidirectional FT (5 V tolerant) I/O; alternate functions I2C2_SDA, SPI5_NSS, FMC_SDNWE.
47 PA3 bidirectional FT I/O; alternate functions TIM2_CH4, TIM5_CH4, TIM9_CH2, USART2_RX, OTG_HS_ULPI_D0, ETH_MII_COL, LCD_B5; analog input ADC123_IN3.
48 BYPASS_REG input FT input; held low enables the internal regulator, held high (VDD) disables it so VCAP_1/VCAP_2 are fed from an external 1.2 V source.
49 VDD power_in Digital supply 1.7 to 3.6 V for I/O and internal regulator.
50 PA4 bidirectional TTa (3.3 V tolerant) I/O; SPI1_NSS, SPI3_NSS/I2S3_WS, USART2_CK, OTG_HS_SOF, DCMI_HSYNC, LCD_VSYNC; ADC12_IN4/DAC_OUT1.
51 PA5 bidirectional TTa (3.3 V tolerant) I/O; TIM2_CH1/ETR, TIM8_CH1N, SPI1_SCK, OTG_HS_ULPI_CK; ADC12_IN5/DAC_OUT2.
52 PA6 bidirectional FT I/O; alternate functions TIM1_BKIN, TIM3_CH1, TIM8_BKIN, SPI1_MISO, TIM13_CH1, DCMI_PIXCLK, LCD_G2; analog input ADC12_IN6.
53 PA7 bidirectional FT I/O; alternate functions TIM1_CH1N, TIM3_CH2, TIM8_CH1N, SPI1_MOSI, TIM14_CH1, ETH_MII_RX_DV/ETH_RMII_CRS_DV; analog input ADC12_IN7.
54 PC4 bidirectional FT I/O; alternate function ETH_MII_RXD0/ETH_RMII_RXD0; analog input ADC12_IN14.
55 PC5 bidirectional FT I/O; alternate function ETH_MII_RXD1/ETH_RMII_RXD1; analog input ADC12_IN15.
56 PB0 bidirectional FT I/O; alternate functions TIM1_CH2N, TIM3_CH3, TIM8_CH2N, LCD_R3, OTG_HS_ULPI_D1, ETH_MII_RXD2; analog input ADC12_IN8.
57 PB1 bidirectional FT I/O; alternate functions TIM1_CH3N, TIM3_CH4, TIM8_CH3N, LCD_R6, OTG_HS_ULPI_D2, ETH_MII_RXD3; analog input ADC12_IN9.
58 PB2-BOOT1 bidirectional FT I/O that also serves as the BOOT1 boot-mode selection pin.
59 PF11 bidirectional FT (5 V tolerant) I/O; alternate functions SPI5_MOSI, FMC_SDNRAS, DCMI_D12.
60 PF12 bidirectional FT (5 V tolerant) I/O; alternate function FMC_A6.
61 VSS power_in Digital ground; all VSS pins must be connected to external ground.
62 VDD power_in Digital supply 1.7 to 3.6 V for I/O and internal regulator.
63 PF13 bidirectional FT (5 V tolerant) I/O; alternate function FMC_A7.
64 PF14 bidirectional FT (5 V tolerant) I/O; alternate function FMC_A8.
65 PF15 bidirectional FT (5 V tolerant) I/O; alternate function FMC_A9.
66 PG0 bidirectional FT (5 V tolerant) I/O; alternate function FMC_A10.
67 PG1 bidirectional FT (5 V tolerant) I/O; alternate function FMC_A11.
68 PE7 bidirectional FT (5 V tolerant) I/O; alternate functions TIM1_ETR, UART7_Rx, FMC_D4.
69 PE8 bidirectional FT (5 V tolerant) I/O; alternate functions TIM1_CH1N, UART7_Tx, FMC_D5.
70 PE9 bidirectional FT (5 V tolerant) I/O; alternate functions TIM1_CH1, FMC_D6.
71 VSS power_in Digital ground; all VSS pins must be connected to external ground.
72 VDD power_in Digital supply 1.7 to 3.6 V for I/O and internal regulator.
73 PE10 bidirectional FT (5 V tolerant) I/O; alternate functions TIM1_CH2N, FMC_D7.
74 PE11 bidirectional FT (5 V tolerant) I/O; alternate functions TIM1_CH2, SPI4_NSS, FMC_D8, LCD_G3.
75 PE12 bidirectional FT (5 V tolerant) I/O; alternate functions TIM1_CH3N, SPI4_SCK, FMC_D9, LCD_B4.
76 PE13 bidirectional FT (5 V tolerant) I/O; alternate functions TIM1_CH3, SPI4_MISO, FMC_D10, LCD_DE.
77 PE14 bidirectional FT (5 V tolerant) I/O; alternate functions TIM1_CH4, SPI4_MOSI, FMC_D11, LCD_CLK.
78 PE15 bidirectional FT (5 V tolerant) I/O; alternate functions TIM1_BKIN, FMC_D12, LCD_R7.
79 PB10 bidirectional FT (5 V tolerant) I/O; alternate functions TIM2_CH3, I2C2_SCL, SPI2_SCK/I2S2_CK, USART3_TX, OTG_HS_ULPI_D3, ETH_MII_RX_ER, LCD_G4.
80 PB11 bidirectional FT (5 V tolerant) I/O; alternate functions TIM2_CH4, I2C2_SDA, USART3_RX, OTG_HS_ULPI_D4, ETH_MII_TX_EN/ETH_RMII_TX_EN, LCD_G5.
81 VCAP_1 passive Regulator output filter pin; connect a 2.2 µF ceramic capacitor with ESR < 2 Ω (100 nF when regulator is OFF).
82 VDD power_in Digital supply 1.7 to 3.6 V for I/O and internal regulator.
83 PH6 bidirectional FT (5 V tolerant) I/O; alternate functions I2C2_SMBA, SPI5_SCK, TIM12_CH1, ETH_MII_RXD2, FMC_SDNE1, DCMI_D8.
84 PH7 bidirectional FT (5 V tolerant) I/O; alternate functions I2C3_SCL, SPI5_MISO, ETH_MII_RXD3, FMC_SDCKE1, DCMI_D9.
85 PH8 bidirectional FT (5 V tolerant) I/O; alternate functions I2C3_SDA, FMC_D16, DCMI_HSYNC, LCD_R2.
86 PH9 bidirectional FT (5 V tolerant) I/O; alternate functions I2C3_SMBA, TIM12_CH2, FMC_D17, DCMI_D0, LCD_R3.
87 PH10 bidirectional FT (5 V tolerant) I/O; alternate functions TIM5_CH1, FMC_D18, DCMI_D1, LCD_R4.
88 PH11 bidirectional FT (5 V tolerant) I/O; alternate functions TIM5_CH2, FMC_D19, DCMI_D2, LCD_R5.
89 PH12 bidirectional FT (5 V tolerant) I/O; alternate functions TIM5_CH3, FMC_D20, DCMI_D3, LCD_R6.
90 VSS power_in Digital ground; all VSS pins must be connected to external ground.
91 VDD power_in Digital supply 1.7 to 3.6 V for I/O and internal regulator.
92 PB12 bidirectional FT (5 V tolerant) I/O; TIM1_BKIN, I2C2_SMBA, SPI2_NSS/I2S2_WS, USART3_CK, CAN2_RX, OTG_HS_ULPI_D5, ETH_MII_TXD0/ETH_RMII_TXD0, OTG_HS_ID.
93 PB13 bidirectional FT (5 V tolerant) I/O; TIM1_CH1N, SPI2_SCK/I2S2_CK, USART3_CTS, CAN2_TX, OTG_HS_ULPI_D6, ETH_MII_TXD1/ETH_RMII_TXD1; OTG_HS_VBUS sensing.
94 PB14 bidirectional FT (5 V tolerant) I/O; TIM1_CH2N, TIM8_CH2N, SPI2_MISO, I2S2ext_SD, USART3_RTS, TIM12_CH1, OTG_HS_DM.
95 PB15 bidirectional FT (5 V tolerant) I/O; RTC_REFIN, TIM1_CH3N, TIM8_CH3N, SPI2_MOSI/I2S2_SD, TIM12_CH2, OTG_HS_DP.
96 PD8 bidirectional FT (5 V tolerant) I/O; alternate functions USART3_TX, FMC_D13.
97 PD9 bidirectional FT (5 V tolerant) I/O; alternate functions USART3_RX, FMC_D14.
98 PD10 bidirectional FT (5 V tolerant) I/O; alternate functions USART3_CK, FMC_D15, LCD_B3.
99 PD11 bidirectional FT (5 V tolerant) I/O; alternate functions USART3_CTS, FMC_A16.
100 PD12 bidirectional FT (5 V tolerant) I/O; alternate functions TIM4_CH1, USART3_RTS, FMC_A17.
101 PD13 bidirectional FT (5 V tolerant) I/O; alternate functions TIM4_CH2, FMC_A18.
102 VSS power_in Digital ground; all VSS pins must be connected to external ground.
103 VDD power_in Digital supply 1.7 to 3.6 V for I/O and internal regulator.
104 PD14 bidirectional FT (5 V tolerant) I/O; alternate functions TIM4_CH3, FMC_D0.
105 PD15 bidirectional FT (5 V tolerant) I/O; alternate functions TIM4_CH4, FMC_D1.
106 PG2 bidirectional FT (5 V tolerant) I/O; alternate function FMC_A12.
107 PG3 bidirectional FT (5 V tolerant) I/O; alternate function FMC_A13.
108 PG4 bidirectional FT (5 V tolerant) I/O; alternate function FMC_A14/FMC_BA0.
109 PG5 bidirectional FT (5 V tolerant) I/O; alternate function FMC_A15/FMC_BA1.
110 PG6 bidirectional FT (5 V tolerant) I/O; alternate functions FMC_INT2, DCMI_D12, LCD_R7.
111 PG7 bidirectional FT (5 V tolerant) I/O; alternate functions USART6_CK, FMC_INT3, DCMI_D13, LCD_CLK.
112 PG8 bidirectional FT (5 V tolerant) I/O; alternate functions SPI6_NSS, USART6_RTS, ETH_PPS_OUT, FMC_SDCLK.
113 VSS power_in Digital ground; all VSS pins must be connected to external ground.
114 VDD power_in Digital supply 1.7 to 3.6 V for I/O and internal regulator.
115 PC6 bidirectional FT (5 V tolerant) I/O; alternate functions TIM3_CH1, TIM8_CH1, I2S2_MCK, USART6_TX, SDIO_D6, DCMI_D0, LCD_HSYNC.
116 PC7 bidirectional FT (5 V tolerant) I/O; alternate functions TIM3_CH2, TIM8_CH2, I2S3_MCK, USART6_RX, SDIO_D7, DCMI_D1, LCD_G6.
117 PC8 bidirectional FT (5 V tolerant) I/O; alternate functions TIM3_CH3, TIM8_CH3, USART6_CK, SDIO_D0, DCMI_D2.
118 PC9 bidirectional FT (5 V tolerant) I/O; alternate functions MCO2, TIM3_CH4, TIM8_CH4, I2C3_SDA, I2S_CKIN, SDIO_D1, DCMI_D3.
119 PA8 bidirectional FT (5 V tolerant) I/O; alternate functions MCO1, TIM1_CH1, I2C3_SCL, USART1_CK, OTG_FS_SOF, LCD_R6.
120 PA9 bidirectional FT (5 V tolerant) I/O; TIM1_CH2, I2C3_SMBA, USART1_TX, DCMI_D0; OTG_FS_VBUS sensing.
121 PA10 bidirectional FT (5 V tolerant) I/O; alternate functions TIM1_CH3, USART1_RX, OTG_FS_ID, DCMI_D1.
122 PA11 bidirectional FT (5 V tolerant) I/O; alternate functions TIM1_CH4, USART1_CTS, CAN1_RX, LCD_R4, OTG_FS_DM.
123 PA12 bidirectional FT (5 V tolerant) I/O; alternate functions TIM1_ETR, USART1_RTS, CAN1_TX, LCD_R5, OTG_FS_DP.
124 PA13 (JTMS-SWDIO) bidirectional FT I/O; JTAG TMS / serial-wire SWDIO debug pin after reset.
125 VCAP_2 passive Regulator output filter pin; connect a 2.2 µF ceramic capacitor with ESR < 2 Ω (100 nF when regulator is OFF).
126 VSS power_in Digital ground; all VSS pins must be connected to external ground.
127 VDD power_in Digital supply 1.7 to 3.6 V for I/O and internal regulator.
128 PH13 bidirectional FT (5 V tolerant) I/O; alternate functions TIM8_CH1N, CAN1_TX, FMC_D21, LCD_G2.
129 PH14 bidirectional FT (5 V tolerant) I/O; alternate functions TIM8_CH2N, FMC_D22, DCMI_D4, LCD_G3.
130 PH15 bidirectional FT (5 V tolerant) I/O; alternate functions TIM8_CH3N, FMC_D23, DCMI_D11, LCD_G4.
131 PI0 bidirectional FT (5 V tolerant) I/O; alternate functions TIM5_CH4, SPI2_NSS/I2S2_WS, FMC_D24, DCMI_D13, LCD_G5; not usable for I2S2 full-duplex.
132 PI1 bidirectional FT (5 V tolerant) I/O; alternate functions SPI2_SCK/I2S2_CK, FMC_D25, DCMI_D8, LCD_G6; not usable for I2S2 full-duplex.
133 PI2 bidirectional FT (5 V tolerant) I/O; alternate functions TIM8_CH4, SPI2_MISO, I2S2ext_SD, FMC_D26, DCMI_D9, LCD_G7.
134 PI3 bidirectional FT (5 V tolerant) I/O; alternate functions TIM8_ETR, SPI2_MOSI/I2S2_SD, FMC_D27, DCMI_D10.
135 VSS power_in Digital ground; all VSS pins must be connected to external ground.
136 VDD power_in Digital supply 1.7 to 3.6 V for I/O and internal regulator.
137 PA14 (JTCK-SWCLK) bidirectional FT I/O; JTAG TCK / serial-wire SWCLK debug pin after reset.
138 PA15 (JTDI) bidirectional FT I/O; JTAG JTDI after reset, with TIM2_CH1/ETR, SPI1_NSS, SPI3_NSS/I2S3_WS.
139 PC10 bidirectional FT (5 V tolerant) I/O; alternate functions SPI3_SCK/I2S3_CK, USART3_TX, UART4_TX, SDIO_D2, DCMI_D8, LCD_R2.
140 PC11 bidirectional FT (5 V tolerant) I/O; alternate functions I2S3ext_SD, SPI3_MISO, USART3_RX, UART4_RX, SDIO_D3, DCMI_D4.
141 PC12 bidirectional FT (5 V tolerant) I/O; alternate functions SPI3_MOSI/I2S3_SD, USART3_CK, UART5_TX, SDIO_CK, DCMI_D9.
142 PD0 bidirectional FT (5 V tolerant) I/O; alternate functions CAN1_RX, FMC_D2.
143 PD1 bidirectional FT (5 V tolerant) I/O; alternate functions CAN1_TX, FMC_D3.
144 PD2 bidirectional FT (5 V tolerant) I/O; alternate functions TIM3_ETR, UART5_RX, SDIO_CMD, DCMI_D11.
145 PD3 bidirectional FT (5 V tolerant) I/O; alternate functions SPI2_SCK/I2S2_CK, USART2_CTS, FMC_CLK, DCMI_D5, LCD_G7.
146 PD4 bidirectional FT (5 V tolerant) I/O; alternate functions USART2_RTS, FMC_NOE.
147 PD5 bidirectional FT (5 V tolerant) I/O; alternate functions USART2_TX, FMC_NWE.
148 VSS power_in Digital ground; all VSS pins must be connected to external ground.
149 VDD power_in Digital supply 1.7 to 3.6 V for I/O and internal regulator.
150 PD6 bidirectional FT (5 V tolerant) I/O; alternate functions SPI3_MOSI/I2S3_SD, SAI1_SD_A, USART2_RX, FMC_NWAIT, DCMI_D10, LCD_B2.
151 PD7 bidirectional FT (5 V tolerant) I/O; alternate functions USART2_CK, FMC_NE1/FMC_NCE2.
152 PG9 bidirectional FT (5 V tolerant) I/O; alternate functions USART6_RX, FMC_NE2/FMC_NCE3, DCMI_VSYNC (silicon revision 3 only).
153 PG10 bidirectional FT (5 V tolerant) I/O; alternate functions LCD_G3, FMC_NCE4_1/FMC_NE3, DCMI_D2, LCD_B2.
154 PG11 bidirectional FT (5 V tolerant) I/O; alternate functions ETH_MII_TX_EN/ETH_RMII_TX_EN, FMC_NCE4_2, DCMI_D3, LCD_B3.
155 PG12 bidirectional FT (5 V tolerant) I/O; alternate functions SPI6_MISO, USART6_RTS, LCD_B4, FMC_NE4, LCD_B1.
156 PG13 bidirectional FT (5 V tolerant) I/O; alternate functions SPI6_SCK, USART6_CTS, ETH_MII_TXD0/ETH_RMII_TXD0, FMC_A24.
157 PG14 bidirectional FT (5 V tolerant) I/O; alternate functions SPI6_MOSI, USART6_TX, ETH_MII_TXD1/ETH_RMII_TXD1, FMC_A25.
158 VSS power_in Digital ground; all VSS pins must be connected to external ground.
159 VDD power_in Digital supply 1.7 to 3.6 V for I/O and internal regulator.
160 PG15 bidirectional FT (5 V tolerant) I/O; alternate functions USART6_CTS, FMC_SDNCAS, DCMI_D13.
161 PB3 (JTDO/TRACESWO) bidirectional FT I/O; JTAG JTDO/TRACESWO after reset, with TIM2_CH2, SPI1_SCK, SPI3_SCK/I2S3_CK.
162 PB4 (NJTRST) bidirectional FT I/O; JTAG NJTRST after reset, with TIM3_CH1, SPI1_MISO, SPI3_MISO, I2S3ext_SD.
163 PB5 bidirectional FT (5 V tolerant) I/O; TIM3_CH2, I2C1_SMBA, SPI1_MOSI, SPI3_MOSI/I2S3_SD, CAN2_RX, OTG_HS_ULPI_D7, ETH_PPS_OUT, FMC_SDCKE1, DCMI_D10.
164 PB6 bidirectional FT (5 V tolerant) I/O; alternate functions TIM4_CH1, I2C1_SCL, USART1_TX, CAN2_TX, FMC_SDNE1, DCMI_D5.
165 PB7 bidirectional FT (5 V tolerant) I/O; alternate functions TIM4_CH2, I2C1_SDA, USART1_RX, FMC_NL, DCMI_VSYNC.
166 BOOT0 input Dedicated boot mode selection input; max input voltage 9 V, also VPP for Flash programming (7 to 9 V).
167 PB8 bidirectional FT (5 V tolerant) I/O; TIM4_CH3, TIM10_CH1, I2C1_SCL, CAN1_RX, ETH_MII_TXD3, SDIO_D4, DCMI_D6, LCD_B6.
168 PB9 bidirectional FT (5 V tolerant) I/O; TIM4_CH4, TIM11_CH1, I2C1_SDA, SPI2_NSS/I2S2_WS, CAN1_TX, SDIO_D5, DCMI_D7, LCD_B7.
169 PE0 bidirectional FT (5 V tolerant) I/O; alternate functions TIM4_ETR, UART8_RX, FMC_NBL0, DCMI_D2.
170 PE1 bidirectional FT (5 V tolerant) I/O; alternate functions UART8_Tx, FMC_NBL1, DCMI_D3.
171 PDR_ON input Enables the power-on/power-down reset supervisor when held high (VDD); connect to an external supervisor to turn internal reset OFF.
172 VDD power_in Digital supply 1.7 to 3.6 V for I/O and internal regulator.
173 PI4 bidirectional FT (5 V tolerant) I/O; alternate functions TIM8_BKIN, FMC_NBL2, DCMI_D5, LCD_B4.
174 PI5 bidirectional FT (5 V tolerant) I/O; alternate functions TIM8_CH1, FMC_NBL3, DCMI_VSYNC, LCD_B5.
175 PI6 bidirectional FT (5 V tolerant) I/O; alternate functions TIM8_CH2, FMC_D28, DCMI_D6, LCD_B6.
176 PI7 bidirectional FT (5 V tolerant) I/O; alternate functions TIM8_CH3, FMC_D29, DCMI_D7, LCD_B7.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package LQFP-176(24x24)
Category Embedded Processors & Controllers
Pins 176

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Standard operating voltage VDD 1.7 3.6 V 93
Analog operating voltage VDDA 1.7 3.6 V ADC limited to 1.2 Msps for 1.7-2.4 V 94
Backup operating voltage VBAT 1.65 3.6 V 93
Internal AHB clock frequency fHCLK 0 180 MHz power scale 1, regulator ON, overdrive ON 93
Input voltage on FT and RST pins VIN -0.3 5.5 V 2 V ≤ VDD ≤ 3.6 V 94
Ambient temperature, suffix 6 TA -40 85 °C maximum power dissipation 94
Ambient temperature, suffix 7 TA -40 105 °C maximum power dissipation 94
Junction temperature range, suffix 6 TJ -40 105 °C suffix 6 95
Junction temperature range, suffix 7 TJ -40 125 °C suffix 7 95
External supply voltage VDD-VSS VDD-VSS -0.3 4 V includes VDDA, VDD and VBAT 91
Maximum junction temperature TJ 125 °C 92
Storage temperature range TSTG -65 150 °C 92
Total current into all VDD pins ΣIVDD 270 mA source current 92
Total current out of all VSS pins ΣIVSS -270 mA sink current 92
Output sink current per I/O pin IIO 25 mA any I/O and control pin 92
Output source current per I/O pin IIO -25 mA any I/O and control pin 92
Flash endurance NEND 10 kcycles TA = -40 to +85 °C, suffix 6 128
Flash data retention tRET 10 years TA = 105 °C after 1000 erase cycles 128
HSE oscillator frequency fOSC_IN 4 26 MHz 118
HSE accuracy ACCHSE -500 500 ppm depends on crystal used in application 118
HSI oscillator accuracy ACCHSI -8 4.5 % factory calibrated, TA = -40 to 105 °C 120
LSI oscillator frequency fLSI 17 32 47 kHz 120
Temperature sensor average slope Avg_Slope 2.5 mV/°C 159
Temperature sensor voltage at 25 °C V25 0.76 V 159
Internal reference voltage VREFINT 1.18 1.21 1.24 V -40 °C < TA < +105 °C 159
Internal reference voltage temperature coefficient TCoeff 30 50 ppm/°C 160
Main PLL input clock fPLL_IN 0.95 1 2.1 MHz 121
Main PLL output clock fPLL_OUT 24 180 MHz 121
NRST pull-up equivalent resistance RPU 30 40 50 kΩ VIN = VSS 136
Weak pull-up equivalent resistance RPU 30 40 50 kΩ VIN = VSS, all pins except PA10/PB12 132
Weak pull-down equivalent resistance RPD 30 40 50 kΩ VIN = VDD, all pins except PA10/PB12 132
I/O input leakage current Ilkg -1 1 µA VSS ≤ VIN ≤ VDD 132
I/O pin capacitance CIO 5 pF 132
Power-on/power-down reset threshold, falling edge VPOR/PDR 1.6 1.68 1.76 V falling edge 97

CAD (KiCad official)

  • Symbol: STM32F427IGT6
  • Footprint: Package_QFP:LQFP-176_24x24mm_P0.5mm
  • 3D model: LQFP-176(24x24) (KiCad packages3D, STEP)
  • 3D model files: stm32f427igt6-etched.step / stm32f427igt6-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm32f427igt6.step / stm32f427igt6.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (226 pp, sha256 9eccb942b0df757c, retrieved 2026-11-05, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF