Generated by kicad-footprint-generator · KiCad file format 20260206
STM32F427IGT6
STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · LQFP-176(24x24)
STM32F427IGT6 from STMicroelectronics, in a LQFP-176(24x24). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PE2 | bidirectional | FT (5 V tolerant) I/O; alternate functions TRACECLK, SPI4_SCK, SAI1_MCLK_A, ETH_MII_TXD3, FMC_A23. |
| 2 | PE3 | bidirectional | FT (5 V tolerant) I/O; alternate functions TRACED0, SAI1_SD_B, FMC_A19. |
| 3 | PE4 | bidirectional | FT (5 V tolerant) I/O; alternate functions TRACED1, SPI4_NSS, SAI1_FS_A, FMC_A20, DCMI_D4, LCD_B0. |
| 4 | PE5 | bidirectional | FT (5 V tolerant) I/O; alternate functions TRACED2, TIM9_CH1, SPI4_MISO, SAI1_SCK_A, FMC_A21, DCMI_D6, LCD_G0. |
| 5 | PE6 | bidirectional | FT (5 V tolerant) I/O; alternate functions TRACED3, TIM9_CH2, SPI4_MOSI, SAI1_SD_A, FMC_A22, DCMI_D7, LCD_G1. |
| 6 | VBAT | power_in | Backup supply for RTC, LSE oscillator, backup registers and backup SRAM when VDD is absent, 1.65 to 3.6 V; connect to VDD when internal reset is OFF. |
| 7 | PI8 | bidirectional | FT I/O powered through backup-domain switch with 3 mA sink limit; in output mode max 2 MHz with 30 pF load; TAMP_2 function. |
| 8 | PC13 | bidirectional | FT I/O powered through backup-domain switch with 3 mA limit; in output mode max 2 MHz with 30 pF load, not usable as a current source; TAMP_1 function. |
| 9 | PC14-OSC32_IN | bidirectional | FT I/O (3 mA limit, max 2 MHz at 30 pF in output mode) also serving as the 32 kHz LSE oscillator input OSC32_IN. |
| 10 | PC15-OSC32_OUT | bidirectional | FT I/O (3 mA limit, max 2 MHz at 30 pF in output mode) also serving as the 32 kHz LSE oscillator output OSC32_OUT. |
| 11 | PI9 | bidirectional | FT (5 V tolerant) I/O; alternate functions CAN1_RX, FMC_D30, LCD_VSYNC. |
| 12 | PI10 | bidirectional | FT (5 V tolerant) I/O; alternate functions ETH_MII_RX_ER, FMC_D31, LCD_HSYNC. |
| 13 | PI11 | bidirectional | FT (5 V tolerant) I/O; alternate function OTG_HS_ULPI_DIR. |
| 14 | VSS | power_in | Digital ground; all VSS pins must be connected to external ground. |
| 15 | VDD | power_in | Digital supply 1.7 to 3.6 V for I/O and internal regulator; decouple with ceramic capacitor. |
| 16 | PF0 | bidirectional | FT (5 V tolerant) I/O; alternate functions I2C2_SDA, FMC_A0. |
| 17 | PF1 | bidirectional | FT (5 V tolerant) I/O; alternate functions I2C2_SCL, FMC_A1. |
| 18 | PF2 | bidirectional | FT (5 V tolerant) I/O; alternate functions I2C2_SMBA, FMC_A2. |
| 19 | PF3 | bidirectional | FT I/O (5 V tolerant except in analog mode); alternate function FMC_A3; analog input ADC3_IN9. |
| 20 | PF4 | bidirectional | FT I/O (5 V tolerant except in analog mode); alternate function FMC_A4; analog input ADC3_IN14. |
| 21 | PF5 | bidirectional | FT I/O (5 V tolerant except in analog mode); alternate function FMC_A5; analog input ADC3_IN15. |
| 22 | VSS | power_in | Digital ground; all VSS pins must be connected to external ground. |
| 23 | VDD | power_in | Digital supply 1.7 to 3.6 V for I/O and internal regulator. |
| 24 | PF6 | bidirectional | FT I/O; alternate functions TIM10_CH1, SPI5_NSS, SAI1_SD_B, UART7_Rx, FMC_NIORD; analog input ADC3_IN4. |
| 25 | PF7 | bidirectional | FT I/O; alternate functions TIM11_CH1, SPI5_SCK, SAI1_MCLK_B, UART7_Tx, FMC_NREG; analog input ADC3_IN5. |
| 26 | PF8 | bidirectional | FT I/O; alternate functions SPI5_MISO, SAI1_SCK_B, TIM13_CH1, FMC_NIOWR; analog input ADC3_IN6. |
| 27 | PF9 | bidirectional | FT I/O; alternate functions SPI5_MOSI, SAI1_FS_B, TIM14_CH1, FMC_CD; analog input ADC3_IN7. |
| 28 | PF10 | bidirectional | FT I/O; alternate functions FMC_INTR, DCMI_D11, LCD_DE; analog input ADC3_IN8. |
| 29 | PH0-OSC_IN | bidirectional | FT I/O also serving as the 4 to 26 MHz HSE oscillator input OSC_IN (also accepts external clock 1 to 50 MHz in bypass). |
| 30 | PH1-OSC_OUT | bidirectional | FT I/O also serving as the HSE oscillator output OSC_OUT. |
| 31 | NRST | bidirectional | Bidirectional reset pin with weak pull-up (30 to 50 kΩ); input pulses under 100 ns are filtered, over 300 ns are recognized. |
| 32 | PC0 | bidirectional | FT I/O; alternate functions OTG_HS_ULPI_STP, FMC_SDNWE; analog input ADC123_IN10. |
| 33 | PC1 | bidirectional | FT I/O; alternate function ETH_MDC; analog input ADC123_IN11. |
| 34 | PC2 | bidirectional | FT I/O; alternate functions SPI2_MISO, I2S2ext_SD, OTG_HS_ULPI_DIR, ETH_MII_TXD2, FMC_SDNE0; analog input ADC123_IN12. |
| 35 | PC3 | bidirectional | FT I/O; alternate functions SPI2_MOSI/I2S2_SD, OTG_HS_ULPI_NXT, ETH_MII_TX_CLK, FMC_SDCKE0; analog input ADC123_IN13. |
| 36 | VDD | power_in | Digital supply 1.7 to 3.6 V for I/O and internal regulator. |
| 37 | VSSA | power_in | Analog ground for ADC, DAC, reset block, RC and PLL; must be connected to VSS. |
| 38 | VREF+ | power_in | ADC/DAC positive reference voltage, 1.7 to 3.6 V, with VREF+ ≤ VDDA and VDDA-VREF+ < 1.2 V. |
| 39 | VDDA | power_in | Analog supply 1.7 to 3.6 V (2.4 to 3.6 V for 2.4 Msps ADC); must be connected to VDD. |
| 40 | PA0-WKUP | bidirectional | FT I/O; WKUP wakeup, TIM2_CH1/ETR, TIM5_CH1, TIM8_ETR, USART2_CTS, UART4_TX, ETH_MII_CRS; ADC123_IN0; acts as internal reset (active low) when BYPASS_REG is tied to VDD. |
| 41 | PA1 | bidirectional | FT I/O; alternate functions TIM2_CH2, TIM5_CH2, USART2_RTS, UART4_RX, ETH_MII_RX_CLK/ETH_RMII_REF_CLK; analog input ADC123_IN1. |
| 42 | PA2 | bidirectional | FT I/O; alternate functions TIM2_CH3, TIM5_CH3, TIM9_CH1, USART2_TX, ETH_MDIO; analog input ADC123_IN2. |
| 43 | PH2 | bidirectional | FT (5 V tolerant) I/O; alternate functions ETH_MII_CRS, FMC_SDCKE0, LCD_R0. |
| 44 | PH3 | bidirectional | FT (5 V tolerant) I/O; alternate functions ETH_MII_COL, FMC_SDNE0, LCD_R1. |
| 45 | PH4 | bidirectional | FT (5 V tolerant) I/O; alternate functions I2C2_SCL, OTG_HS_ULPI_NXT. |
| 46 | PH5 | bidirectional | FT (5 V tolerant) I/O; alternate functions I2C2_SDA, SPI5_NSS, FMC_SDNWE. |
| 47 | PA3 | bidirectional | FT I/O; alternate functions TIM2_CH4, TIM5_CH4, TIM9_CH2, USART2_RX, OTG_HS_ULPI_D0, ETH_MII_COL, LCD_B5; analog input ADC123_IN3. |
| 48 | BYPASS_REG | input | FT input; held low enables the internal regulator, held high (VDD) disables it so VCAP_1/VCAP_2 are fed from an external 1.2 V source. |
| 49 | VDD | power_in | Digital supply 1.7 to 3.6 V for I/O and internal regulator. |
| 50 | PA4 | bidirectional | TTa (3.3 V tolerant) I/O; SPI1_NSS, SPI3_NSS/I2S3_WS, USART2_CK, OTG_HS_SOF, DCMI_HSYNC, LCD_VSYNC; ADC12_IN4/DAC_OUT1. |
| 51 | PA5 | bidirectional | TTa (3.3 V tolerant) I/O; TIM2_CH1/ETR, TIM8_CH1N, SPI1_SCK, OTG_HS_ULPI_CK; ADC12_IN5/DAC_OUT2. |
| 52 | PA6 | bidirectional | FT I/O; alternate functions TIM1_BKIN, TIM3_CH1, TIM8_BKIN, SPI1_MISO, TIM13_CH1, DCMI_PIXCLK, LCD_G2; analog input ADC12_IN6. |
| 53 | PA7 | bidirectional | FT I/O; alternate functions TIM1_CH1N, TIM3_CH2, TIM8_CH1N, SPI1_MOSI, TIM14_CH1, ETH_MII_RX_DV/ETH_RMII_CRS_DV; analog input ADC12_IN7. |
| 54 | PC4 | bidirectional | FT I/O; alternate function ETH_MII_RXD0/ETH_RMII_RXD0; analog input ADC12_IN14. |
| 55 | PC5 | bidirectional | FT I/O; alternate function ETH_MII_RXD1/ETH_RMII_RXD1; analog input ADC12_IN15. |
| 56 | PB0 | bidirectional | FT I/O; alternate functions TIM1_CH2N, TIM3_CH3, TIM8_CH2N, LCD_R3, OTG_HS_ULPI_D1, ETH_MII_RXD2; analog input ADC12_IN8. |
| 57 | PB1 | bidirectional | FT I/O; alternate functions TIM1_CH3N, TIM3_CH4, TIM8_CH3N, LCD_R6, OTG_HS_ULPI_D2, ETH_MII_RXD3; analog input ADC12_IN9. |
| 58 | PB2-BOOT1 | bidirectional | FT I/O that also serves as the BOOT1 boot-mode selection pin. |
| 59 | PF11 | bidirectional | FT (5 V tolerant) I/O; alternate functions SPI5_MOSI, FMC_SDNRAS, DCMI_D12. |
| 60 | PF12 | bidirectional | FT (5 V tolerant) I/O; alternate function FMC_A6. |
| 61 | VSS | power_in | Digital ground; all VSS pins must be connected to external ground. |
| 62 | VDD | power_in | Digital supply 1.7 to 3.6 V for I/O and internal regulator. |
| 63 | PF13 | bidirectional | FT (5 V tolerant) I/O; alternate function FMC_A7. |
| 64 | PF14 | bidirectional | FT (5 V tolerant) I/O; alternate function FMC_A8. |
| 65 | PF15 | bidirectional | FT (5 V tolerant) I/O; alternate function FMC_A9. |
| 66 | PG0 | bidirectional | FT (5 V tolerant) I/O; alternate function FMC_A10. |
| 67 | PG1 | bidirectional | FT (5 V tolerant) I/O; alternate function FMC_A11. |
| 68 | PE7 | bidirectional | FT (5 V tolerant) I/O; alternate functions TIM1_ETR, UART7_Rx, FMC_D4. |
| 69 | PE8 | bidirectional | FT (5 V tolerant) I/O; alternate functions TIM1_CH1N, UART7_Tx, FMC_D5. |
| 70 | PE9 | bidirectional | FT (5 V tolerant) I/O; alternate functions TIM1_CH1, FMC_D6. |
| 71 | VSS | power_in | Digital ground; all VSS pins must be connected to external ground. |
| 72 | VDD | power_in | Digital supply 1.7 to 3.6 V for I/O and internal regulator. |
| 73 | PE10 | bidirectional | FT (5 V tolerant) I/O; alternate functions TIM1_CH2N, FMC_D7. |
| 74 | PE11 | bidirectional | FT (5 V tolerant) I/O; alternate functions TIM1_CH2, SPI4_NSS, FMC_D8, LCD_G3. |
| 75 | PE12 | bidirectional | FT (5 V tolerant) I/O; alternate functions TIM1_CH3N, SPI4_SCK, FMC_D9, LCD_B4. |
| 76 | PE13 | bidirectional | FT (5 V tolerant) I/O; alternate functions TIM1_CH3, SPI4_MISO, FMC_D10, LCD_DE. |
| 77 | PE14 | bidirectional | FT (5 V tolerant) I/O; alternate functions TIM1_CH4, SPI4_MOSI, FMC_D11, LCD_CLK. |
| 78 | PE15 | bidirectional | FT (5 V tolerant) I/O; alternate functions TIM1_BKIN, FMC_D12, LCD_R7. |
| 79 | PB10 | bidirectional | FT (5 V tolerant) I/O; alternate functions TIM2_CH3, I2C2_SCL, SPI2_SCK/I2S2_CK, USART3_TX, OTG_HS_ULPI_D3, ETH_MII_RX_ER, LCD_G4. |
| 80 | PB11 | bidirectional | FT (5 V tolerant) I/O; alternate functions TIM2_CH4, I2C2_SDA, USART3_RX, OTG_HS_ULPI_D4, ETH_MII_TX_EN/ETH_RMII_TX_EN, LCD_G5. |
| 81 | VCAP_1 | passive | Regulator output filter pin; connect a 2.2 µF ceramic capacitor with ESR < 2 Ω (100 nF when regulator is OFF). |
| 82 | VDD | power_in | Digital supply 1.7 to 3.6 V for I/O and internal regulator. |
| 83 | PH6 | bidirectional | FT (5 V tolerant) I/O; alternate functions I2C2_SMBA, SPI5_SCK, TIM12_CH1, ETH_MII_RXD2, FMC_SDNE1, DCMI_D8. |
| 84 | PH7 | bidirectional | FT (5 V tolerant) I/O; alternate functions I2C3_SCL, SPI5_MISO, ETH_MII_RXD3, FMC_SDCKE1, DCMI_D9. |
| 85 | PH8 | bidirectional | FT (5 V tolerant) I/O; alternate functions I2C3_SDA, FMC_D16, DCMI_HSYNC, LCD_R2. |
| 86 | PH9 | bidirectional | FT (5 V tolerant) I/O; alternate functions I2C3_SMBA, TIM12_CH2, FMC_D17, DCMI_D0, LCD_R3. |
| 87 | PH10 | bidirectional | FT (5 V tolerant) I/O; alternate functions TIM5_CH1, FMC_D18, DCMI_D1, LCD_R4. |
| 88 | PH11 | bidirectional | FT (5 V tolerant) I/O; alternate functions TIM5_CH2, FMC_D19, DCMI_D2, LCD_R5. |
| 89 | PH12 | bidirectional | FT (5 V tolerant) I/O; alternate functions TIM5_CH3, FMC_D20, DCMI_D3, LCD_R6. |
| 90 | VSS | power_in | Digital ground; all VSS pins must be connected to external ground. |
| 91 | VDD | power_in | Digital supply 1.7 to 3.6 V for I/O and internal regulator. |
| 92 | PB12 | bidirectional | FT (5 V tolerant) I/O; TIM1_BKIN, I2C2_SMBA, SPI2_NSS/I2S2_WS, USART3_CK, CAN2_RX, OTG_HS_ULPI_D5, ETH_MII_TXD0/ETH_RMII_TXD0, OTG_HS_ID. |
| 93 | PB13 | bidirectional | FT (5 V tolerant) I/O; TIM1_CH1N, SPI2_SCK/I2S2_CK, USART3_CTS, CAN2_TX, OTG_HS_ULPI_D6, ETH_MII_TXD1/ETH_RMII_TXD1; OTG_HS_VBUS sensing. |
| 94 | PB14 | bidirectional | FT (5 V tolerant) I/O; TIM1_CH2N, TIM8_CH2N, SPI2_MISO, I2S2ext_SD, USART3_RTS, TIM12_CH1, OTG_HS_DM. |
| 95 | PB15 | bidirectional | FT (5 V tolerant) I/O; RTC_REFIN, TIM1_CH3N, TIM8_CH3N, SPI2_MOSI/I2S2_SD, TIM12_CH2, OTG_HS_DP. |
| 96 | PD8 | bidirectional | FT (5 V tolerant) I/O; alternate functions USART3_TX, FMC_D13. |
| 97 | PD9 | bidirectional | FT (5 V tolerant) I/O; alternate functions USART3_RX, FMC_D14. |
| 98 | PD10 | bidirectional | FT (5 V tolerant) I/O; alternate functions USART3_CK, FMC_D15, LCD_B3. |
| 99 | PD11 | bidirectional | FT (5 V tolerant) I/O; alternate functions USART3_CTS, FMC_A16. |
| 100 | PD12 | bidirectional | FT (5 V tolerant) I/O; alternate functions TIM4_CH1, USART3_RTS, FMC_A17. |
| 101 | PD13 | bidirectional | FT (5 V tolerant) I/O; alternate functions TIM4_CH2, FMC_A18. |
| 102 | VSS | power_in | Digital ground; all VSS pins must be connected to external ground. |
| 103 | VDD | power_in | Digital supply 1.7 to 3.6 V for I/O and internal regulator. |
| 104 | PD14 | bidirectional | FT (5 V tolerant) I/O; alternate functions TIM4_CH3, FMC_D0. |
| 105 | PD15 | bidirectional | FT (5 V tolerant) I/O; alternate functions TIM4_CH4, FMC_D1. |
| 106 | PG2 | bidirectional | FT (5 V tolerant) I/O; alternate function FMC_A12. |
| 107 | PG3 | bidirectional | FT (5 V tolerant) I/O; alternate function FMC_A13. |
| 108 | PG4 | bidirectional | FT (5 V tolerant) I/O; alternate function FMC_A14/FMC_BA0. |
| 109 | PG5 | bidirectional | FT (5 V tolerant) I/O; alternate function FMC_A15/FMC_BA1. |
| 110 | PG6 | bidirectional | FT (5 V tolerant) I/O; alternate functions FMC_INT2, DCMI_D12, LCD_R7. |
| 111 | PG7 | bidirectional | FT (5 V tolerant) I/O; alternate functions USART6_CK, FMC_INT3, DCMI_D13, LCD_CLK. |
| 112 | PG8 | bidirectional | FT (5 V tolerant) I/O; alternate functions SPI6_NSS, USART6_RTS, ETH_PPS_OUT, FMC_SDCLK. |
| 113 | VSS | power_in | Digital ground; all VSS pins must be connected to external ground. |
| 114 | VDD | power_in | Digital supply 1.7 to 3.6 V for I/O and internal regulator. |
| 115 | PC6 | bidirectional | FT (5 V tolerant) I/O; alternate functions TIM3_CH1, TIM8_CH1, I2S2_MCK, USART6_TX, SDIO_D6, DCMI_D0, LCD_HSYNC. |
| 116 | PC7 | bidirectional | FT (5 V tolerant) I/O; alternate functions TIM3_CH2, TIM8_CH2, I2S3_MCK, USART6_RX, SDIO_D7, DCMI_D1, LCD_G6. |
| 117 | PC8 | bidirectional | FT (5 V tolerant) I/O; alternate functions TIM3_CH3, TIM8_CH3, USART6_CK, SDIO_D0, DCMI_D2. |
| 118 | PC9 | bidirectional | FT (5 V tolerant) I/O; alternate functions MCO2, TIM3_CH4, TIM8_CH4, I2C3_SDA, I2S_CKIN, SDIO_D1, DCMI_D3. |
| 119 | PA8 | bidirectional | FT (5 V tolerant) I/O; alternate functions MCO1, TIM1_CH1, I2C3_SCL, USART1_CK, OTG_FS_SOF, LCD_R6. |
| 120 | PA9 | bidirectional | FT (5 V tolerant) I/O; TIM1_CH2, I2C3_SMBA, USART1_TX, DCMI_D0; OTG_FS_VBUS sensing. |
| 121 | PA10 | bidirectional | FT (5 V tolerant) I/O; alternate functions TIM1_CH3, USART1_RX, OTG_FS_ID, DCMI_D1. |
| 122 | PA11 | bidirectional | FT (5 V tolerant) I/O; alternate functions TIM1_CH4, USART1_CTS, CAN1_RX, LCD_R4, OTG_FS_DM. |
| 123 | PA12 | bidirectional | FT (5 V tolerant) I/O; alternate functions TIM1_ETR, USART1_RTS, CAN1_TX, LCD_R5, OTG_FS_DP. |
| 124 | PA13 (JTMS-SWDIO) | bidirectional | FT I/O; JTAG TMS / serial-wire SWDIO debug pin after reset. |
| 125 | VCAP_2 | passive | Regulator output filter pin; connect a 2.2 µF ceramic capacitor with ESR < 2 Ω (100 nF when regulator is OFF). |
| 126 | VSS | power_in | Digital ground; all VSS pins must be connected to external ground. |
| 127 | VDD | power_in | Digital supply 1.7 to 3.6 V for I/O and internal regulator. |
| 128 | PH13 | bidirectional | FT (5 V tolerant) I/O; alternate functions TIM8_CH1N, CAN1_TX, FMC_D21, LCD_G2. |
| 129 | PH14 | bidirectional | FT (5 V tolerant) I/O; alternate functions TIM8_CH2N, FMC_D22, DCMI_D4, LCD_G3. |
| 130 | PH15 | bidirectional | FT (5 V tolerant) I/O; alternate functions TIM8_CH3N, FMC_D23, DCMI_D11, LCD_G4. |
| 131 | PI0 | bidirectional | FT (5 V tolerant) I/O; alternate functions TIM5_CH4, SPI2_NSS/I2S2_WS, FMC_D24, DCMI_D13, LCD_G5; not usable for I2S2 full-duplex. |
| 132 | PI1 | bidirectional | FT (5 V tolerant) I/O; alternate functions SPI2_SCK/I2S2_CK, FMC_D25, DCMI_D8, LCD_G6; not usable for I2S2 full-duplex. |
| 133 | PI2 | bidirectional | FT (5 V tolerant) I/O; alternate functions TIM8_CH4, SPI2_MISO, I2S2ext_SD, FMC_D26, DCMI_D9, LCD_G7. |
| 134 | PI3 | bidirectional | FT (5 V tolerant) I/O; alternate functions TIM8_ETR, SPI2_MOSI/I2S2_SD, FMC_D27, DCMI_D10. |
| 135 | VSS | power_in | Digital ground; all VSS pins must be connected to external ground. |
| 136 | VDD | power_in | Digital supply 1.7 to 3.6 V for I/O and internal regulator. |
| 137 | PA14 (JTCK-SWCLK) | bidirectional | FT I/O; JTAG TCK / serial-wire SWCLK debug pin after reset. |
| 138 | PA15 (JTDI) | bidirectional | FT I/O; JTAG JTDI after reset, with TIM2_CH1/ETR, SPI1_NSS, SPI3_NSS/I2S3_WS. |
| 139 | PC10 | bidirectional | FT (5 V tolerant) I/O; alternate functions SPI3_SCK/I2S3_CK, USART3_TX, UART4_TX, SDIO_D2, DCMI_D8, LCD_R2. |
| 140 | PC11 | bidirectional | FT (5 V tolerant) I/O; alternate functions I2S3ext_SD, SPI3_MISO, USART3_RX, UART4_RX, SDIO_D3, DCMI_D4. |
| 141 | PC12 | bidirectional | FT (5 V tolerant) I/O; alternate functions SPI3_MOSI/I2S3_SD, USART3_CK, UART5_TX, SDIO_CK, DCMI_D9. |
| 142 | PD0 | bidirectional | FT (5 V tolerant) I/O; alternate functions CAN1_RX, FMC_D2. |
| 143 | PD1 | bidirectional | FT (5 V tolerant) I/O; alternate functions CAN1_TX, FMC_D3. |
| 144 | PD2 | bidirectional | FT (5 V tolerant) I/O; alternate functions TIM3_ETR, UART5_RX, SDIO_CMD, DCMI_D11. |
| 145 | PD3 | bidirectional | FT (5 V tolerant) I/O; alternate functions SPI2_SCK/I2S2_CK, USART2_CTS, FMC_CLK, DCMI_D5, LCD_G7. |
| 146 | PD4 | bidirectional | FT (5 V tolerant) I/O; alternate functions USART2_RTS, FMC_NOE. |
| 147 | PD5 | bidirectional | FT (5 V tolerant) I/O; alternate functions USART2_TX, FMC_NWE. |
| 148 | VSS | power_in | Digital ground; all VSS pins must be connected to external ground. |
| 149 | VDD | power_in | Digital supply 1.7 to 3.6 V for I/O and internal regulator. |
| 150 | PD6 | bidirectional | FT (5 V tolerant) I/O; alternate functions SPI3_MOSI/I2S3_SD, SAI1_SD_A, USART2_RX, FMC_NWAIT, DCMI_D10, LCD_B2. |
| 151 | PD7 | bidirectional | FT (5 V tolerant) I/O; alternate functions USART2_CK, FMC_NE1/FMC_NCE2. |
| 152 | PG9 | bidirectional | FT (5 V tolerant) I/O; alternate functions USART6_RX, FMC_NE2/FMC_NCE3, DCMI_VSYNC (silicon revision 3 only). |
| 153 | PG10 | bidirectional | FT (5 V tolerant) I/O; alternate functions LCD_G3, FMC_NCE4_1/FMC_NE3, DCMI_D2, LCD_B2. |
| 154 | PG11 | bidirectional | FT (5 V tolerant) I/O; alternate functions ETH_MII_TX_EN/ETH_RMII_TX_EN, FMC_NCE4_2, DCMI_D3, LCD_B3. |
| 155 | PG12 | bidirectional | FT (5 V tolerant) I/O; alternate functions SPI6_MISO, USART6_RTS, LCD_B4, FMC_NE4, LCD_B1. |
| 156 | PG13 | bidirectional | FT (5 V tolerant) I/O; alternate functions SPI6_SCK, USART6_CTS, ETH_MII_TXD0/ETH_RMII_TXD0, FMC_A24. |
| 157 | PG14 | bidirectional | FT (5 V tolerant) I/O; alternate functions SPI6_MOSI, USART6_TX, ETH_MII_TXD1/ETH_RMII_TXD1, FMC_A25. |
| 158 | VSS | power_in | Digital ground; all VSS pins must be connected to external ground. |
| 159 | VDD | power_in | Digital supply 1.7 to 3.6 V for I/O and internal regulator. |
| 160 | PG15 | bidirectional | FT (5 V tolerant) I/O; alternate functions USART6_CTS, FMC_SDNCAS, DCMI_D13. |
| 161 | PB3 (JTDO/TRACESWO) | bidirectional | FT I/O; JTAG JTDO/TRACESWO after reset, with TIM2_CH2, SPI1_SCK, SPI3_SCK/I2S3_CK. |
| 162 | PB4 (NJTRST) | bidirectional | FT I/O; JTAG NJTRST after reset, with TIM3_CH1, SPI1_MISO, SPI3_MISO, I2S3ext_SD. |
| 163 | PB5 | bidirectional | FT (5 V tolerant) I/O; TIM3_CH2, I2C1_SMBA, SPI1_MOSI, SPI3_MOSI/I2S3_SD, CAN2_RX, OTG_HS_ULPI_D7, ETH_PPS_OUT, FMC_SDCKE1, DCMI_D10. |
| 164 | PB6 | bidirectional | FT (5 V tolerant) I/O; alternate functions TIM4_CH1, I2C1_SCL, USART1_TX, CAN2_TX, FMC_SDNE1, DCMI_D5. |
| 165 | PB7 | bidirectional | FT (5 V tolerant) I/O; alternate functions TIM4_CH2, I2C1_SDA, USART1_RX, FMC_NL, DCMI_VSYNC. |
| 166 | BOOT0 | input | Dedicated boot mode selection input; max input voltage 9 V, also VPP for Flash programming (7 to 9 V). |
| 167 | PB8 | bidirectional | FT (5 V tolerant) I/O; TIM4_CH3, TIM10_CH1, I2C1_SCL, CAN1_RX, ETH_MII_TXD3, SDIO_D4, DCMI_D6, LCD_B6. |
| 168 | PB9 | bidirectional | FT (5 V tolerant) I/O; TIM4_CH4, TIM11_CH1, I2C1_SDA, SPI2_NSS/I2S2_WS, CAN1_TX, SDIO_D5, DCMI_D7, LCD_B7. |
| 169 | PE0 | bidirectional | FT (5 V tolerant) I/O; alternate functions TIM4_ETR, UART8_RX, FMC_NBL0, DCMI_D2. |
| 170 | PE1 | bidirectional | FT (5 V tolerant) I/O; alternate functions UART8_Tx, FMC_NBL1, DCMI_D3. |
| 171 | PDR_ON | input | Enables the power-on/power-down reset supervisor when held high (VDD); connect to an external supervisor to turn internal reset OFF. |
| 172 | VDD | power_in | Digital supply 1.7 to 3.6 V for I/O and internal regulator. |
| 173 | PI4 | bidirectional | FT (5 V tolerant) I/O; alternate functions TIM8_BKIN, FMC_NBL2, DCMI_D5, LCD_B4. |
| 174 | PI5 | bidirectional | FT (5 V tolerant) I/O; alternate functions TIM8_CH1, FMC_NBL3, DCMI_VSYNC, LCD_B5. |
| 175 | PI6 | bidirectional | FT (5 V tolerant) I/O; alternate functions TIM8_CH2, FMC_D28, DCMI_D6, LCD_B6. |
| 176 | PI7 | bidirectional | FT (5 V tolerant) I/O; alternate functions TIM8_CH3, FMC_D29, DCMI_D7, LCD_B7. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | LQFP-176(24x24) |
| Category | Embedded Processors & Controllers |
| Pins | 176 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Standard operating voltage | VDD | 1.7 | 3.6 | V | 93 | ||
| Analog operating voltage | VDDA | 1.7 | 3.6 | V | ADC limited to 1.2 Msps for 1.7-2.4 V | 94 | |
| Backup operating voltage | VBAT | 1.65 | 3.6 | V | 93 | ||
| Internal AHB clock frequency | fHCLK | 0 | 180 | MHz | power scale 1, regulator ON, overdrive ON | 93 | |
| Input voltage on FT and RST pins | VIN | -0.3 | 5.5 | V | 2 V ≤ VDD ≤ 3.6 V | 94 | |
| Ambient temperature, suffix 6 | TA | -40 | 85 | °C | maximum power dissipation | 94 | |
| Ambient temperature, suffix 7 | TA | -40 | 105 | °C | maximum power dissipation | 94 | |
| Junction temperature range, suffix 6 | TJ | -40 | 105 | °C | suffix 6 | 95 | |
| Junction temperature range, suffix 7 | TJ | -40 | 125 | °C | suffix 7 | 95 | |
| External supply voltage VDD-VSS | VDD-VSS | -0.3 | 4 | V | includes VDDA, VDD and VBAT | 91 | |
| Maximum junction temperature | TJ | 125 | °C | 92 | |||
| Storage temperature range | TSTG | -65 | 150 | °C | 92 | ||
| Total current into all VDD pins | ΣIVDD | 270 | mA | source current | 92 | ||
| Total current out of all VSS pins | ΣIVSS | -270 | mA | sink current | 92 | ||
| Output sink current per I/O pin | IIO | 25 | mA | any I/O and control pin | 92 | ||
| Output source current per I/O pin | IIO | -25 | mA | any I/O and control pin | 92 | ||
| Flash endurance | NEND | 10 | kcycles | TA = -40 to +85 °C, suffix 6 | 128 | ||
| Flash data retention | tRET | 10 | years | TA = 105 °C after 1000 erase cycles | 128 | ||
| HSE oscillator frequency | fOSC_IN | 4 | 26 | MHz | 118 | ||
| HSE accuracy | ACCHSE | -500 | 500 | ppm | depends on crystal used in application | 118 | |
| HSI oscillator accuracy | ACCHSI | -8 | 4.5 | % | factory calibrated, TA = -40 to 105 °C | 120 | |
| LSI oscillator frequency | fLSI | 17 | 32 | 47 | kHz | 120 | |
| Temperature sensor average slope | Avg_Slope | 2.5 | mV/°C | 159 | |||
| Temperature sensor voltage at 25 °C | V25 | 0.76 | V | 159 | |||
| Internal reference voltage | VREFINT | 1.18 | 1.21 | 1.24 | V | -40 °C < TA < +105 °C | 159 |
| Internal reference voltage temperature coefficient | TCoeff | 30 | 50 | ppm/°C | 160 | ||
| Main PLL input clock | fPLL_IN | 0.95 | 1 | 2.1 | MHz | 121 | |
| Main PLL output clock | fPLL_OUT | 24 | 180 | MHz | 121 | ||
| NRST pull-up equivalent resistance | RPU | 30 | 40 | 50 | kΩ | VIN = VSS | 136 |
| Weak pull-up equivalent resistance | RPU | 30 | 40 | 50 | kΩ | VIN = VSS, all pins except PA10/PB12 | 132 |
| Weak pull-down equivalent resistance | RPD | 30 | 40 | 50 | kΩ | VIN = VDD, all pins except PA10/PB12 | 132 |
| I/O input leakage current | Ilkg | -1 | 1 | µA | VSS ≤ VIN ≤ VDD | 132 | |
| I/O pin capacitance | CIO | 5 | pF | 132 | |||
| Power-on/power-down reset threshold, falling edge | VPOR/PDR | 1.6 | 1.68 | 1.76 | V | falling edge | 97 |
CAD (KiCad official)
- Symbol:
STM32F427IGT6 - Footprint:
Package_QFP:LQFP-176_24x24mm_P0.5mm - 3D model: LQFP-176(24x24) (KiCad packages3D, STEP)
- 3D model files:
stm32f427igt6-etched.step/stm32f427igt6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32f427igt6.step/stm32f427igt6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (226 pp, sha256
9eccb942b0df757c, retrieved 2026-11-05, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).