main
History Download
Ray Publish 0.1.0 0561a54

STM32F413RHT6

STMicroelectronics · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-64(10x10)

STM32F413RHT6 from STMicroelectronics, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VBAT power_in Backup power supply input for the RTC and backup registers.
2 PC13-ANTI_TAMP bidirectional 5 V tolerant I/O powered through the power switch, limited to 3 mA sink and 2 MHz with 30 pF output use, also TAMP_1 function.
3 PC14-OSC32_IN bidirectional 5 V tolerant I/O powered through the power switch, limited to 3 mA sink and 2 MHz with 30 pF output use, also OSC32_IN oscillator pin.
4 PC15-OSC32_OUT bidirectional 5 V tolerant I/O powered through the power switch, limited to 3 mA sink and 2 MHz with 30 pF output use, also OSC32_OUT oscillator pin.
5 PH0-OSC_IN bidirectional 5 V tolerant pin in I/O mode, serving as OSC_IN for the HSE 4-26 MHz crystal in oscillator mode.
6 PH1-OSC_OUT bidirectional 5 V tolerant pin in I/O mode, serving as OSC_OUT for the HSE 4-26 MHz crystal in oscillator mode.
7 NRST bidirectional Bidirectional reset pin with embedded weak pull-up resistor.
8 PC0 bidirectional 5 V tolerant I/O with LPTIM1_IN1, DFSDM2_CKIN4, SAI1_MCLK_B and ADC1_IN10 analog input, also WKUP2.
9 PC1 bidirectional 5 V tolerant I/O with LPTIM1_OUT, DFSDM2_DATIN4, SAI1_SD_B and ADC1_IN11 analog input, also WKUP3.
10 PC2 bidirectional 5 V tolerant I/O with SPI2_MISO, I2S2ext_SD, SAI1_SCK_B, FSMC_NWE and ADC1_IN12 analog input.
11 PC3 bidirectional 5 V tolerant I/O with LPTIM1_ETR, SPI2_MOSI/I2S2_SD, SAI1_FS_B, FSMC_A0 and ADC1_IN13 analog input.
12 VSSA power_in Analog ground pin, labelled VSSA/VREF- on the LQFP64 package.
13 VDDA power_in Analog power supply pin, labelled VDDA/VREF+ on the LQFP64 package.
14 PA0 bidirectional 5 V tolerant I/O with TIM2_CH1/TIM2_ETR, TIM5_CH1, USART2_CTS, UART4_TX and ADC1_IN0 analog input, also WKUP1.
15 PA1 bidirectional 5 V tolerant I/O with TIM2_CH2, TIM5_CH2, USART2_RTS, UART4_RX, QUADSPI_BK1_IO3 and ADC1_IN1 analog input.
16 PA2 bidirectional 5 V tolerant I/O with TIM2_CH3, TIM5_CH3, TIM9_CH1, USART2_TX, FSMC_D4 and ADC1_IN2 analog input.
17 PA3 bidirectional 5 V tolerant I/O with TIM2_CH4, TIM5_CH4, TIM9_CH2, USART2_RX, FSMC_D5 and ADC1_IN3 analog input.
18 VSS power_in Ground pin for the digital core and I/Os.
19 VDD power_in Main 1.7 to 3.6 V application supply and I/O supply pin.
20 PA4 bidirectional 3.3 V tolerant TTa I/O directly connected to DAC, with SPI1_NSS/I2S1_WS, USART2_CK, FSMC_D6 and ADC1_IN4 analog input, DAC_OUT1.
21 PA5 bidirectional 3.3 V tolerant TTa I/O directly connected to DAC, with TIM2_CH1/TIM2_ETR, SPI1_SCK/I2S1_CK, FSMC_D7 and ADC1_IN5 analog input, DAC_OUT2.
22 PA6 bidirectional 5 V tolerant I/O with TIM1_BKIN, TIM3_CH1, SPI1_MISO, I2S2_MCK, TIM13_CH1, SDIO_CMD and ADC1_IN6 analog input.
23 PA7 bidirectional 5 V tolerant I/O with TIM1_CH1N, TIM3_CH2, SPI1_MOSI/I2S1_SD, TIM14_CH1, QUADSPI_BK2_IO1 and ADC1_IN7 analog input.
24 PC4 bidirectional 5 V tolerant I/O with DFSDM2_CKIN2, I2S1_MCK, QUADSPI_BK2_IO2, FSMC_NE4 and ADC1_IN14 analog input.
25 PC5 bidirectional 5 V tolerant I/O with DFSDM2_DATIN2, I2CFMP1_SMBA, USART3_RX, QUADSPI_BK2_IO3, FSMC_NOE and ADC1_IN15 analog input.
26 PB0 bidirectional 5 V tolerant I/O with TIM1_CH2N, TIM3_CH3, TIM8_CH2N, SPI5_SCK/I2S5_CK and ADC1_IN8 analog input.
27 PB1 bidirectional 5 V tolerant I/O with TIM1_CH3N, TIM3_CH4, TIM8_CH3N, SPI5_NSS/I2S5_WS, DFSDM1_DATIN0, QUADSPI_CLK and ADC1_IN9 analog input.
28 PB2 bidirectional 5 V tolerant I/O with LPTIM1_OUT, DFSDM1_CKIN0 and QUADSPI_CLK, also BOOT1.
29 PB10 bidirectional 5 V tolerant I/O with FTf (I2C FM+ option), with TIM2_CH3, I2C2_SCL, SPI2_SCK/I2S2_CK, USART3_TX, I2CFMP1_SCL and SDIO_D7.
30 VCAP_1 passive Connection for the external VCAP_1 capacitor of the internal voltage regulator.
31 VSS power_in Ground pin for the digital core and I/Os.
32 VDD power_in Main 1.7 to 3.6 V application supply and I/O supply pin.
33 PB12 bidirectional 5 V tolerant I/O with TIM1_BKIN, I2C2_SMBA, SPI2_NSS/I2S2_WS, USART3_CK, CAN2_RX, DFSDM1_DATIN1 and FSMC_D13.
34 PB13 bidirectional 5 V tolerant I/O with TIM1_CH1N, I2CFMP1_SMBA, SPI2_SCK/I2S2_CK, USART3_CTS, CAN2_TX, DFSDM1_CKIN1 and UART5_TX.
35 PB14 bidirectional 5 V tolerant I/O with FTf (I2C FM+ option), with TIM1_CH2N, TIM8_CH2N, I2CFMP1_SDA, SPI2_MISO, USART3_RTS and FSMC_D0.
36 PB15 bidirectional 5 V tolerant I/O with FTf (I2C FM+ option), with RTC_REFIN, TIM1_CH3N, TIM8_CH3N, I2CFMP1_SCL, SPI2_MOSI/I2S2_SD and SDIO_CK.
37 PC6 bidirectional 5 V tolerant I/O with FTf (I2C FM+ option), with TIM3_CH1, TIM8_CH1, I2CFMP1_SCL, I2S2_MCK, USART6_TX, FSMC_D1 and SDIO_D6.
38 PC7 bidirectional 5 V tolerant I/O with FTf (I2C FM+ option), with TIM3_CH2, TIM8_CH2, I2CFMP1_SDA, SPI2_SCK/I2S2_CK, USART6_RX and SDIO_D7.
39 PC8 bidirectional 5 V tolerant I/O with TIM3_CH3, TIM8_CH3, USART6_CK, QUADSPI_BK1_IO2 and SDIO_D0.
40 PC9 bidirectional 5 V tolerant I/O with MCO_2, TIM3_CH4, TIM8_CH4, I2C3_SDA, I2S2_CKIN, QUADSPI_BK1_IO0 and SDIO_D1.
41 PA8 bidirectional 5 V tolerant I/O with MCO_1, TIM1_CH1, I2C3_SCL, DFSDM1_CKOUT, USART1_CK, UART7_RX, USB_FS_SOF and CAN3_RX.
42 PA9 bidirectional 5 V tolerant I/O with TIM1_CH2, I2C3_SMBA, SPI2_SCK/I2S2_CK, USART1_TX, USB_FS_VBUS and SDIO_D2.
43 PA10 bidirectional 5 V tolerant I/O with TIM1_CH3, SPI2_MOSI/I2S2_SD, SPI5_MOSI/I2S5_SD, USART1_RX and USB_FS_ID.
44 PA11 bidirectional 5 V tolerant I/O with TIM1_CH4, SPI2_NSS/I2S2_WS, SPI4_MISO, USART1_CTS, USART6_TX, CAN1_RX, USB_FS_DM and UART4_RX.
45 PA12 bidirectional 5 V tolerant I/O with TIM1_ETR, SPI2_MISO, SPI5_MISO, USART1_RTS, USART6_RX, CAN1_TX, USB_FS_DP and UART4_TX.
46 PA13 bidirectional 5 V tolerant I/O with JTMS-SWDIO function of the serial wire debug port.
47 VSS power_in Ground pin for the digital core and I/Os.
48 VDD power_in Main 1.7 to 3.6 V application supply and I/O supply pin.
49 PA14 bidirectional 5 V tolerant I/O with JTCK-SWCLK function of the serial wire debug port.
50 PA15 bidirectional 5 V tolerant I/O with JTDI, TIM2_CH1/TIM2_ETR, SPI1_NSS/I2S1_WS, SPI3_NSS/I2S3_WS, USART1_TX, UART7_TX, SAI1_MCLK_A and CAN3_TX.
51 PC10 bidirectional 5 V tolerant I/O with DFSDM2_CKIN5, SPI3_SCK/I2S3_CK, USART3_TX, QUADSPI_BK1_IO1 and SDIO_D2.
52 PC11 bidirectional 5 V tolerant I/O with DFSDM2_DATIN5, I2S3ext_SD, SPI3_MISO, USART3_RX, UART4_RX, QUADSPI_BK2_NCS, FSMC_D2 and SDIO_D3.
53 PC12 bidirectional 5 V tolerant I/O with SPI3_MOSI/I2S3_SD, USART3_CK, UART5_TX, FSMC_D3 and SDIO_CK.
54 PD2 bidirectional 5 V tolerant I/O with TIM3_ETR, DFSDM2_CKOUT, UART5_RX, FSMC_NWE and SDIO_CMD.
55 PB3 bidirectional 5 V tolerant I/O with FTf (I2C FM+ option), with JTDO-SWO, TIM2_CH2, I2CFMP1_SDA, SPI1_SCK/I2S1_CK, USART1_RX and I2C2_SDA.
56 PB4 bidirectional 5 V tolerant I/O with JTRST, TIM3_CH1, SPI1_MISO, SPI3_MISO, UART7_TX, I2C3_SDA, CAN3_TX and SDIO_D0.
57 PB5 bidirectional 5 V tolerant I/O with LPTIM1_IN1, TIM3_CH2, I2C1_SMBA, SPI1_MOSI/I2S1_SD, CAN2_RX, UART5_RX and SDIO_D3.
58 PB6 bidirectional 5 V tolerant I/O with LPTIM1_ETR, TIM4_CH1, I2C1_SCL, USART1_TX, CAN2_TX, UART5_TX and SDIO_D0.
59 PB7 bidirectional 5 V tolerant I/O with LPTIM1_IN2, TIM4_CH2, I2C1_SDA, USART1_RX and FSMC_NL.
60 BOOT0 input Dedicated BOOT0 pin used to select the boot mode, also serving as VPP.
61 PB8 bidirectional 5 V tolerant I/O with LPTIM1_OUT, TIM4_CH3, TIM10_CH1, I2C1_SCL, SPI5_MOSI/I2S5_SD, CAN1_RX, I2C3_SDA, UART5_RX and SDIO_D4.
62 PB9 bidirectional 5 V tolerant I/O with FTf (I2C FM+ option), with TIM4_CH4, TIM11_CH1, I2C1_SDA, SPI2_NSS/I2S2_WS, CAN1_TX, I2C2_SDA, UART5_TX and SDIO_D5.
63 VSS power_in Ground pin for the digital core and I/Os.
64 VDD power_in Main 1.7 to 3.6 V application supply and I/O supply pin.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package LQFP-64(10x10)
Category Single Chip Microcomputer/Microcontroller
Pins 64

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
External main supply voltage (including VDDA, VDD, VDDUSB and VBAT) VDD-VSS -0.3 4 V 79
Input voltage on any other pin VIN 4 V Input voltage on any other pin (min printed as VSS-0.3) 79
Input voltage on TTa pins VIN 4 V Input voltage on TTa pins (min printed as VSS-0.3) 79
Input voltage for BOOT0 VIN 0 9 V Input voltage for BOOT0 79
Variations between different VDD power pins /ΔVDDx/ 50 mV 79
Variations between all the different ground pins including VREF- /VSSX −VSS/ 50 mV 79
Total current into sum of all VDD_x power lines (source) ΣIVDD 180 mA 80
Total current out of sum of all VSS_x ground lines (sink) ΣIVSS -180 mA 80
Total current into VDDUSB power lines (source) ΣIVDDUSB 25 mA 80
Maximum current into each VDD_x power line (source) IVDD 100 mA 80
Maximum current out of each VSS_x ground line (sink) IVSS -100 mA 80
Output current sunk by any I/O and control pin IIO 25 mA 80
Output current sourced by any I/O and control pin IIO -25 mA 80
Total output current sunk by sum of all I/O and control pins ΣIIO 120 mA 80
Total output current sourced by sum of all I/Os and control pins ΣIIO -120 mA 80
Total injected current (sum of all I/O and control pins) ΣIINJ(PIN) -25 25 mA 80
Storage temperature range TSTG -65 150 °C 80
Maximum junction temperature TJ 125 °C 80
Internal AHB clock frequency fHCLK 0 64 MHz Power Scale3: Regulator ON, VOS[1:0] bits in PWR_CR register = 0x01 81
Internal AHB clock frequency fHCLK 0 84 MHz Power Scale2: Regulator ON, VOS[1:0] bits in PWR_CR register = 0x10 81
Internal AHB clock frequency fHCLK 0 100 MHz Power Scale1: Regulator ON, VOS[1:0] bits in PWR_CR register = 0x11 81
Internal APB1 clock frequency fPCLK1 0 50 MHz 81
Internal APB2 clock frequency fPCLK2 0 100 MHz 81
Standard operating voltage VDD 1.7 3.6 V 81
Analog operating voltage (ADC limited to 1.2 M samples) VDDA 1.7 2.4 V Must be the same potential as VDD 81
Analog operating voltage (ADC limited to 2.4 M samples) VDDA 2.4 3.6 V Must be the same potential as VDD 81
USB supply voltage (USB not used) VDDUSB 1.7 3.3 3.6 V USB not used; supply voltage for PA11 and PA12 pins 81
USB supply voltage (USB used) VDDUSB 3 3.6 V USB used; supply voltage for PA11 and PA12 pins 81
Backup operating voltage VBAT 1.65 3.6 V 81
Regulator ON: 1.2 V internal voltage on VCAP_1/VCAP_2 pins V12 1.08 1.14 1.2 V VOS[1:0] bits in PWR_CR register = 0x01; max frequency 64 MHz 81
Regulator ON: 1.2 V internal voltage on VCAP_1/VCAP_2 pins V12 1.2 1.26 1.32 V VOS[1:0] bits in PWR_CR register = 0x10; max frequency 84 MHz 81
Regulator ON: 1.2 V internal voltage on VCAP_1/VCAP_2 pins V12 1.26 1.32 1.38 V VOS[1:0] bits in PWR_CR register = 0x11; max frequency 100 MHz 81
Regulator OFF: 1.2 V external voltage on VCAP_1/VCAP_2 pins V12 1.1 1.14 1.2 V Max frequency 64 MHz 81
Regulator OFF: 1.2 V external voltage on VCAP_1/VCAP_2 pins V12 1.2 1.26 1.32 V Max frequency 84 MHz 81
Regulator OFF: 1.2 V external voltage on VCAP_1/VCAP_2 pins V12 1.26 1.32 1.38 V Max frequency 100 MHz 81
Input voltage on RST, FT and TC pins VIN -0.3 5.5 V 2 V ≤ VDD ≤ 3.6 V 82
Input voltage on RST, FT and TC pins VIN -0.3 5.2 V VDD ≤ 2 V 82
Input voltage on BOOT0 pin VIN 0 9 V 82
Ambient temperature for range 6 (maximum power dissipation) TA -40 85 °C Range 6, maximum power dissipation 82
Ambient temperature for range 7 (maximum power dissipation) TA -40 105 °C Range 7, maximum power dissipation 82
Ambient temperature for range 3 (maximum power dissipation) TA -40 125 °C Range 3, maximum power dissipation 82
Junction temperature range TJ -40 105 °C Range 6 82
Junction temperature range TJ -40 125 °C Range 7 82
Junction temperature range TJ -40 130 °C Range 3 82
VDD rise time rate (regulator ON) tVDD 20 µs/V Power-up/power-down; VDD rise time rate 84
Power-on/power-down reset threshold (falling edge) VPOR/PDR 1.6 1.68 1.76 V Falling edge 85
Power-on/power-down reset threshold (rising edge) VPOR/PDR 1.64 1.72 1.8 V Rising edge 85
PDR hysteresis VPDRhyst 40 mV 85
PVD hysteresis VPVDhyst 100 mV 85
Brownout level 1 threshold (falling edge) VBOR1 2.13 2.19 2.24 V Falling edge 86
Brownout level 1 threshold (rising edge) VBOR1 2.23 2.29 2.33 V Rising edge 86
BOR hysteresis VBORhyst 100 mV 86
POR reset timing TRSTTEMPO 0.5 1.5 3 ms 86
Supply current in Run mode, external clock, PLL ON, all peripherals enabled, ART accelerator disabled, running from SRAM, VDD = 3.6 V, fHCLK 100 MHz IDD 33.3 35.32 mA TA = 25 °C; fHCLK 100 MHz; VDD = 3.6 V 88
Supply current in Run mode, external clock, PLL ON, all peripherals enabled, ART accelerator disabled, running from SRAM, VDD = 3.6 V, fHCLK 100 MHz IDD 41.26 mA TA = 125 °C; fHCLK 100 MHz; VDD = 3.6 V 88
Supply current in Run mode, external clock, PLL ON, all peripherals enabled, ART accelerator disabled, running from Flash, VDD = 3.6 V, fHCLK 100 MHz IDD 39.9 42.46 mA TA = 25 °C; fHCLK 100 MHz; VDD = 3.6 V 91
Supply current in Run mode, external clock, PLL ON, all peripherals enabled, ART accelerator disabled, running from Flash, VDD = 3.6 V, fHCLK 100 MHz IDD 49.19 mA TA = 125 °C; fHCLK 100 MHz; VDD = 3.6 V 91
Typical and maximum Stop mode supply current, Flash in Stop mode, all oscillators OFF, low power regulator usage, VDD = 3.6 V IDD_STOP 44.1 82.5 µA TA = 25 °C; no independent watchdog 97
Typical and maximum Standby mode supply current, RTC and LSE OFF, VDD = 1.7 V IDD_STBY 1.1 2.5 µA TA = 25 °C 97
Typical and maximum Standby mode supply current, RTC and LSE OFF, VDD = 3.6 V IDD_STBY 2.5 4 µA TA = 25 °C 98
Typical and maximum Standby mode supply current, RTC and LSE OFF, VDD = 3.6 V IDD_STBY 19.4 µA TA = 85 °C 98
Typical and maximum Standby mode supply current, RTC and LSE OFF, VDD = 3.6 V IDD_STBY 81.5 µA TA = 125 °C 98
Backup domain supply current, LSE low-drive mode and RTC ON IDD_VBAT 10 µA VBAT = 3.6 V; TA = 125 °C 98
LSI oscillator frequency fLSI 16.1 32 47 kHz VDD = 3 V, TA = -40 to 125 °C 112
LSI oscillator startup time tsu(LSI) 15 40 µs 112
LSI oscillator power consumption IDD(LSI) 0.4 0.6 µA 112

CAD (KiCad official)

  • Symbol: STM32F413RHT6
  • Footprint: Package_QFP:LQFP-64_10x10mm_P0.5mm
  • 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
  • 3D model files: stm32f413rht6-etched.step / stm32f413rht6-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm32f413rht6.step / stm32f413rht6.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (203 pp, sha256 4157ab59cb88ac0f, retrieved 2026-11-02, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF